Λοιπόν στον υπολογιστή μου (Kubuntu 16.04 64bit) υπάρχει μια παλιά (τουλάχιστον δεκαετίας) ασύρματη usb κάρτα της Belkin, η οποία εδώ και χρόνια λειτουργεί κανονικότατα και συγκεκριμένα η :
- Κώδικας: Επιλογή όλων
ID 050d:705a Belkin Components F5D7050 Wireless G Adapter v3000 [Ralink RT2571W]
Εδώ και μερικές μέρες, όταν ανοίγει ο υπολογιστής τις περισσότερες φορές η κάρτα δεν ενεργοποιείται, χρειάζεται να την βγάλω και να την ξαναβάλω στην θύρα usb για να λειτουργήσει. Η αλλαγή θύρας δεν έχει κάποιο αποτέλεσμα.
Εξυπακούεται ότι το παραπάνω αποτέλεσμα της lsusb προέρχεται μόνο όταν ενεργοποιηθεί η κάρτα, αλλιώς δεν την εμφανίζει και στην σχετική εντολή.
Θα ποστάρω δύο dmesg, το πρώτο όταν ανοίξει ο υπολογιστής και δεν έχει ενεργοποιηθεί η κάρτα, το δεύτερο όταν έχει λειτουργήσει, αφού βγάλω και ξαναβάλω την κάρτα.
Θέλω να διευκρινίσω ότι στο πρώτο η κάρτα αναγράφεται (δεν έβγαινε όμως και στην lsusb) αλλά υπήρξε και αντίστοιχο dmesg (δυστυχώς δεν το έσωσα) στο οποίο δεν την ανέφερε καθόλου.
Παρατηρείτε κάτι που δεν πάει καλά ή απλά η κάρτα έχει αρχίσει και παραδίδει το πνεύμα ;
- Κώδικας: Επιλογή όλων
dimitris@dimitris-H110M-DS2:~$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0xc2, date = 2017-11-16
[ 0.000000] random: get_random_bytes called from start_kernel+0x42/0x507 with crng_init=0
[ 0.000000] Linux version 4.13.0-45-generic (buildd@lgw01-amd64-011) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.9)) #50~16.04.1-Ubunt
u SMP Wed May 30 11:18:27 UTC 2018 (Ubuntu 4.13.0-45.50~16.04.1-generic 4.13.16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic.efi.signed root=UUID=a845013a-99c1-466e-ad97-bcca3cc51e4d ro quiet splash vt.h
andoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b7a03fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7a04000-0x00000000b7a04fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7a05000-0x00000000b7a05fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7a06000-0x00000000be53ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be540000-0x00000000be86efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000be86f000-0x00000000be9dcfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000be9dd000-0x00000000bf08bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf08c000-0x00000000bf7a2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf7a3000-0x00000000bf7fefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bf7ff000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xbecdd000 ACPI=0xbecdd000 SMBIOS=0xbf6ce000 SMBIOS 3.0=0xbf6cd000 MPS=0xfc9f0 ESRT=0xbd258918
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. H110M-DS2/H110M-DS2-CF, BIOS F21 06/09/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcc70-0x000fcc7f] mapped at [ffff8b73800fcc70]
[ 0.000000] esrt: Reserving ESRT space from 0x00000000bd258918 to 0x00000000bd258950.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff8b7380095000] 95000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x2bd2c000, 0x2bd2cfff] PGTABLE
[ 0.000000] BRK [0x2bd2d000, 0x2bd2dfff] PGTABLE
[ 0.000000] BRK [0x2bd2e000, 0x2bd2efff] PGTABLE
[ 0.000000] BRK [0x2bd2f000, 0x2bd2ffff] PGTABLE
[ 0.000000] BRK [0x2bd30000, 0x2bd30fff] PGTABLE
[ 0.000000] BRK [0x2bd31000, 0x2bd31fff] PGTABLE
[ 0.000000] BRK [0x2bd32000, 0x2bd32fff] PGTABLE
[ 0.000000] BRK [0x2bd33000, 0x2bd33fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x32080000-0x35037fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BECDD000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BECDD0A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BED05690 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BECDD200 02848C (v02 ALASKA A M I 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x00000000BF08BC40 000040
[ 0.000000] ACPI: APIC 0x00000000BED057A8 000068 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BED05810 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BED05858 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: FIDT 0x00000000BED05898 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BED05938 003154 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x00000000BED08A90 002544 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x00000000BED0AFD8 000038 (v01 INTEL SKL 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BED0B010 000E3B (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x00000000BED0BE50 002AD7 (v02 INTEL xh_rvp10 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x00000000BED0E928 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x00000000BED0E970 000EDE (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x00000000BED0F850 000094 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x00000000BED0F8E8 000028 (v01 INTEL SKL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BED0F910 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x00000000BED0FBB0 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x00000000BED12BB8 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000BED12BF0 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: BGRT 0x00000000BED12C48 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x00000000BED12C80 000070 (v01 INTEL SKL 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x13efd3000-0x13effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b7a03fff]
[ 0.000000] node 0: [mem 0x00000000b7a06000-0x00000000be53ffff]
[ 0.000000] node 0: [mem 0x00000000be86f000-0x00000000be9dcfff]
[ 0.000000] node 0: [mem 0x00000000bf7ff000-0x00000000bf7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000013effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000013effffff]
[ 0.000000] On node 0 totalpages: 1037898
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 27 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12123 pages used for memmap
[ 0.000000] DMA32 zone: 775853 pages, LIFO batch:31
[ 0.000000] Normal zone: 4032 pages used for memmap
[ 0.000000] Normal zone: 258048 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7a04000-0xb7a04fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb7a05000-0xb7a05fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe540000-0xbe86efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe9dd000-0xbf08bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf08c000-0xbf7a2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf7a3000-0xbf7fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 45 pages/cpu @ffff8b74bec00000 s146584 r8192 d29544 u1048576
[ 0.000000] pcpu-alloc: s146584 r8192 d29544 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1021652
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.13.0-45-generic.efi.signed root=UUID=a845013a-99c1-466e-ad97-bcca3cc51e4d ro quiet spla
sh vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3814568K/4151592K available (12300K kernel code, 2481K rwdata, 4012K rodata, 2368K init, 2372K bss, 337024K reserved, 0K cma-re
served)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37875 entries in 148 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 524544, nr_irqs: 512, preallocated irqs: 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] tsc: Detected 3300.000 MHz processor
[ 0.004000] tsc: Detected 3312.000 MHz TSC
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6624.00 BogoMIPS (lpj=13248000)
[ 0.004000] pid_max: default: 32768 minimum: 301
[ 0.004000] ACPI: Core revision 20170531
[ 0.030146] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.030731] Security Framework initialized
[ 0.030732] Yama: becoming mindful.
[ 0.030744] AppArmor: AppArmor initialized
[ 0.031409] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.031741] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.031755] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.031766] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.031900] CPU: Physical Processor ID: 0
[ 0.031900] CPU: Processor Core ID: 0
[ 0.031904] FEATURE SPEC_CTRL Present
[ 0.031906] mce: CPU supports 8 MCE banks
[ 0.031913] CPU0: Thermal monitoring enabled (TM1)
[ 0.031924] process: using mwait in idle threads
[ 0.031925] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[ 0.031926] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.031927] Spectre V2 mitigation: Mitigation: Full generic retpoline
[ 0.031928] Spectre V2 mitigation: Speculation control IBPB supported IBRS supported
[ 0.031928] Spectre V2 mitigation: Retpoline compiled kernel. Defaulting IBRS to disabled
[ 0.031928] Spectre V2 mitigation: Filling RSB on context switch
[ 0.031929] Speculative Store Bypass: Vulnerable
[ 0.032022] Freeing SMP alternatives memory: 36K
[ 0.036584] smpboot: Max logical packages: 1
[ 0.036588] DMAR: Host address width 39
[ 0.036589] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.036594] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.036595] DMAR: RMRR base: 0x000000be7fd000 end: 0x000000be81cfff
[ 0.036597] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.036597] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.036598] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.037934] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.037935] x2apic enabled
[ 0.037945] Switched APIC routing to cluster x2apic.
[ 0.041916] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081635] TSC deadline timer enabled
[ 0.081640] smpboot: CPU0: Intel(R) Pentium(R) CPU G4400 @ 3.30GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.081685] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.081707] ... version: 4
[ 0.081707] ... bit width: 48
[ 0.081707] ... generic registers: 8
[ 0.081708] ... value mask: 0000ffffffffffff
[ 0.081708] ... max period: 00007fffffffffff
[ 0.081709] ... fixed-purpose events: 3
[ 0.081709] ... event mask: 00000007000000ff
[ 0.081739] Hierarchical SRCU implementation.
[ 0.082300] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.082310] smp: Bringing up secondary CPUs ...
[ 0.082357] x86: Booting SMP configuration:
[ 0.082358] .... node #0, CPUs: #1
[ 0.083569] smp: Brought up 1 node, 2 CPUs
[ 0.083569] smpboot: Total of 2 processors activated (13248.00 BogoMIPS)
[ 0.083569] devtmpfs: initialized
[ 0.083569] x86/mm: Memory block size: 128MB
[ 0.083569] evm: security.selinux
[ 0.083569] evm: security.SMACK64
[ 0.083569] evm: security.SMACK64EXEC
[ 0.083569] evm: security.SMACK64TRANSMUTE
[ 0.083569] evm: security.SMACK64MMAP
[ 0.083569] evm: security.ima
[ 0.083569] evm: security.capability
[ 0.083569] PM: Registering ACPI NVS region [mem 0xb7a04000-0xb7a04fff] (4096 bytes)
[ 0.083569] PM: Registering ACPI NVS region [mem 0xbe9dd000-0xbf08bfff] (7008256 bytes)
[ 0.083569] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.083569] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.083569] pinctrl core: initialized pinctrl subsystem
[ 0.083569] RTC time: 12:01:28, date: 08/06/18
[ 0.083569] NET: Registered protocol family 16
[ 0.084006] cpuidle: using governor ladder
[ 0.084006] cpuidle: using governor menu
[ 0.084006] PCCT header not found.
[ 0.084029] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.084030] ACPI: bus type PCI registered
[ 0.084031] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.084073] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[ 0.084075] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[ 0.084080] PCI: Using configuration type 1 for base access
[ 0.084693] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.084693] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.084693] ACPI: Added _OSI(Module Device)
[ 0.084693] ACPI: Added _OSI(Processor Device)
[ 0.084693] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.084693] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.084875] ACPI: Executed 35 blocks of module-level executable AML code
[ 0.094324] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.097218] ACPI: Dynamic OEM Table Load:
[ 0.097227] ACPI: SSDT 0xFFFF8B74B97BE800 0006D5 (v02 PmRef Cpu0Ist 00003000 INTL 20160422)
[ 0.097393] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.097442] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.098455] ACPI: Dynamic OEM Table Load:
[ 0.098458] ACPI: SSDT 0xFFFF8B74B905A000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422)
[ 0.098613] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.098908] ACPI: Dynamic OEM Table Load:
[ 0.098912] ACPI: SSDT 0xFFFF8B74B97B8000 00065C (v02 PmRef ApIst 00003000 INTL 20160422)
[ 0.099220] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.099360] ACPI: Dynamic OEM Table Load:
[ 0.099363] ACPI: SSDT 0xFFFF8B74B97C8200 00018A (v02 PmRef ApCst 00003000 INTL 20160422)
[ 0.099517] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.101022] ACPI: Interpreter enabled
[ 0.101053] ACPI: (supports S0 S3 S4 S5)
[ 0.101054] ACPI: Using IOAPIC for interrupt routing
[ 0.101083] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.101834] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.103722] ACPI: Power Resource [PG00] (on)
[ 0.104004] ACPI: Power Resource [PG01] (on)
[ 0.104276] ACPI: Power Resource [PG02] (on)
[ 0.106856] ACPI: Power Resource [WRST] (on)
[ 0.107104] ACPI: Power Resource [WRST] (on)
[ 0.107348] ACPI: Power Resource [WRST] (on)
[ 0.107592] ACPI: Power Resource [WRST] (on)
[ 0.107837] ACPI: Power Resource [WRST] (on)
[ 0.108084] ACPI: Power Resource [WRST] (on)
[ 0.108326] ACPI: Power Resource [WRST] (on)
[ 0.108571] ACPI: Power Resource [WRST] (on)
[ 0.108813] ACPI: Power Resource [WRST] (on)
[ 0.109060] ACPI: Power Resource [WRST] (on)
[ 0.109323] ACPI: Power Resource [WRST] (on)
[ 0.109568] ACPI: Power Resource [WRST] (on)
[ 0.109813] ACPI: Power Resource [WRST] (on)
[ 0.110057] ACPI: Power Resource [WRST] (on)
[ 0.110300] ACPI: Power Resource [WRST] (on)
[ 0.110544] ACPI: Power Resource [WRST] (on)
[ 0.110787] ACPI: Power Resource [WRST] (on)
[ 0.111715] ACPI: Power Resource [WRST] (on)
[ 0.111962] ACPI: Power Resource [WRST] (on)
[ 0.112213] ACPI: Power Resource [WRST] (on)
[ 0.123071] ACPI: Power Resource [FN00] (off)
[ 0.123131] ACPI: Power Resource [FN01] (off)
[ 0.123190] ACPI: Power Resource [FN02] (off)
[ 0.123250] ACPI: Power Resource [FN03] (off)
[ 0.123310] ACPI: Power Resource [FN04] (off)
[ 0.124234] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[ 0.124239] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.124263] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.124788] PCI host bridge to bus 0000:00
[ 0.124790] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.124791] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.124792] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.124793] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xefffffff window]
[ 0.124794] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.124795] pci_bus 0000:00: root bus resource [bus 00-7e]
[ 0.124801] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[ 0.125052] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.125084] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.125277] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.125297] pci 0000:00:14.0: reg 0x10: [mem 0xeff10000-0xeff1ffff 64bit]
[ 0.125360] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.125526] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.125550] pci 0000:00:16.0: reg 0x10: [mem 0xeff2d000-0xeff2dfff 64bit]
[ 0.125613] pci 0000:00:16.0: PME# supported from D3hot
[ 0.125733] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.125750] pci 0000:00:17.0: reg 0x10: [mem 0xeff28000-0xeff29fff]
[ 0.125757] pci 0000:00:17.0: reg 0x14: [mem 0xeff2c000-0xeff2c0ff]
[ 0.125763] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.125770] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.125776] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.125783] pci 0000:00:17.0: reg 0x24: [mem 0xeff2b000-0xeff2b7ff]
[ 0.125819] pci 0000:00:17.0: PME# supported from D3hot
[ 0.125926] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[ 0.125986] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.126116] pci 0000:00:1c.5: [8086:a115] type 01 class 0x060400
[ 0.126175] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.126292] pci 0000:00:1c.6: [8086:a116] type 01 class 0x060400
[ 0.126351] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.126466] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[ 0.126524] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.126640] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[ 0.126706] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.126824] pci 0000:00:1d.1: [8086:a119] type 01 class 0x060400
[ 0.126889] pci 0000:00:1d.1: PME# supported from D0 D3hot D3cold
[ 0.127028] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[ 0.127226] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.127239] pci 0000:00:1f.2: reg 0x10: [mem 0xeff24000-0xeff27fff]
[ 0.127372] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.127397] pci 0000:00:1f.3: reg 0x10: [mem 0xeff20000-0xeff23fff 64bit]
[ 0.127421] pci 0000:00:1f.3: reg 0x20: [mem 0xeff00000-0xeff0ffff 64bit]
[ 0.127466] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.127615] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.127675] pci 0000:00:1f.4: reg 0x10: [mem 0xeff2a000-0xeff2a0ff 64bit]
[ 0.127743] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.127936] pci 0000:01:00.0: [1002:6779] type 00 class 0x030000
[ 0.127955] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.127964] pci 0000:01:00.0: reg 0x18: [mem 0xefe20000-0xefe3ffff 64bit]
[ 0.127970] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.127981] pci 0000:01:00.0: reg 0x30: [mem 0xefe00000-0xefe1ffff pref]
[ 0.127994] pci 0000:01:00.0: BAR 0: assigned to efifb
[ 0.128023] pci 0000:01:00.0: supports D1 D2
[ 0.128063] pci 0000:01:00.1: [1002:aa98] type 00 class 0x040300
[ 0.128081] pci 0000:01:00.1: reg 0x10: [mem 0xefe40000-0xefe43fff 64bit]
[ 0.128146] pci 0000:01:00.1: supports D1 D2
[ 0.140032] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.140039] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.140045] pci 0000:00:01.0: bridge window [mem 0xefe00000-0xefefffff]
[ 0.140066] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.140155] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.140182] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.140207] pci 0000:02:00.0: reg 0x18: [mem 0xefd00000-0xefd00fff 64bit]
[ 0.140222] pci 0000:02:00.0: reg 0x20: [mem 0xe0000000-0xe0003fff 64bit pref]
[ 0.140310] pci 0000:02:00.0: supports D1 D2
[ 0.140311] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140414] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.140416] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.140419] pci 0000:00:1c.0: bridge window [mem 0xefd00000-0xefdfffff]
[ 0.140422] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.140489] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.140571] pci 0000:04:00.0: [1106:3483] type 00 class 0x0c0330
[ 0.140595] pci 0000:04:00.0: reg 0x10: [mem 0xefc00000-0xefc00fff 64bit]
[ 0.140679] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140751] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.140755] pci 0000:00:1c.6: bridge window [mem 0xefc00000-0xefcfffff]
[ 0.140824] pci 0000:00:1c.7: PCI bridge to [bus 05]
[ 0.140896] pci 0000:00:1d.0: PCI bridge to [bus 06]
[ 0.140969] pci 0000:00:1d.1: PCI bridge to [bus 07]
[ 0.142715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.142754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.142791] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.142827] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.142863] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.142899] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.142937] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.142973] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.143506] SCSI subsystem initialized
[ 0.143529] libata version 3.00 loaded.
[ 0.143529] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.143529] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.143529] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.143529] vgaarb: loaded
[ 0.143529] ACPI: bus type USB registered
[ 0.143529] usbcore: registered new interface driver usbfs
[ 0.143529] usbcore: registered new interface driver hub
[ 0.143529] usbcore: registered new device driver usb
[ 0.143529] EDAC MC: Ver: 3.0.0
[ 0.143529] Registered efivars operations
[ 0.161665] PCI: Using ACPI for IRQ routing
[ 0.174962] PCI: pci_cache_line_size set to 64 bytes
[ 0.175007] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.175008] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.175009] e820: reserve RAM buffer [mem 0xb7a04000-0xb7ffffff]
[ 0.175009] e820: reserve RAM buffer [mem 0xbe540000-0xbfffffff]
[ 0.175010] e820: reserve RAM buffer [mem 0xbe9dd000-0xbfffffff]
[ 0.175011] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.175012] e820: reserve RAM buffer [mem 0x13f000000-0x13fffffff]
[ 0.175064] NetLabel: Initializing
[ 0.175065] NetLabel: domain hash size = 128
[ 0.175065] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.175074] NetLabel: unlabeled traffic allowed by default
[ 0.175082] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.175082] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.177025] clocksource: Switched to clocksource hpet
[ 0.182525] VFS: Disk quotas dquot_6.6.0
[ 0.182536] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.182599] AppArmor: AppArmor Filesystem Enabled
[ 0.182623] pnp: PnP ACPI init
[ 0.182853] system 00:00: [io 0x0a00-0x0a2f] has been reserved
[ 0.182855] system 00:00: [io 0x0a30-0x0a3f] has been reserved
[ 0.182856] system 00:00: [io 0x0a40-0x0a4f] has been reserved
[ 0.182858] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.183212] pnp 00:01: [dma 0 disabled]
[ 0.183317] pnp 00:01: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.183623] pnp 00:02: [dma 0 disabled]
[ 0.183651] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.183750] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.183753] system 00:03: [io 0xffff] has been reserved
[ 0.183755] system 00:03: [io 0xffff] has been reserved
[ 0.183756] system 00:03: [io 0xffff] has been reserved
[ 0.183757] system 00:03: [io 0x1800-0x18fe] has been reserved
[ 0.183758] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.183759] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.183826] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.183827] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.183839] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.183865] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.183866] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.184058] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.184059] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.184060] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.184061] system 00:07: [mem 0xf0000000-0xf7ffffff] has been reserved
[ 0.184062] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.184064] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.184065] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.184066] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.184067] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.184068] system 00:07: [mem 0xeffe0000-0xefffffff] has been reserved
[ 0.184070] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184098] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.184099] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.184100] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.184101] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.184102] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.184103] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.184105] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.184106] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.184331] system 00:09: [io 0xff00-0xfffe] has been reserved
[ 0.184332] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185180] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.185181] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.185182] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.185183] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.185816] pnp: PnP ACPI: found 11 devices
[ 0.193369] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.193406] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.193407] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.193410] pci 0000:00:01.0: bridge window [mem 0xefe00000-0xefefffff]
[ 0.193411] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.193414] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.193416] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.193418] pci 0000:00:1c.0: bridge window [mem 0xefd00000-0xefdfffff]
[ 0.193421] pci 0000:00:1c.0: bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.193424] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.193432] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.193434] pci 0000:00:1c.6: bridge window [mem 0xefc00000-0xefcfffff]
[ 0.193439] pci 0000:00:1c.7: PCI bridge to [bus 05]
[ 0.193446] pci 0000:00:1d.0: PCI bridge to [bus 06]
[ 0.193454] pci 0000:00:1d.1: PCI bridge to [bus 07]
[ 0.193462] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.193463] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.193465] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.193466] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xefffffff window]
[ 0.193467] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.193467] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.193468] pci_bus 0000:01: resource 1 [mem 0xefe00000-0xefefffff]
[ 0.193469] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.193471] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.193471] pci_bus 0000:02: resource 1 [mem 0xefd00000-0xefdfffff]
[ 0.193472] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.193473] pci_bus 0000:04: resource 1 [mem 0xefc00000-0xefcfffff]
[ 0.193578] NET: Registered protocol family 2
[ 0.193669] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.193719] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.193793] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.193814] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.193826] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.193855] NET: Registered protocol family 1
[ 0.194623] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.194775] PCI: CLS 64 bytes, default 64
[ 0.194802] Unpacking initramfs...
[ 0.724361] Freeing initrd memory: 48864K
[ 0.724436] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.724438] software IO TLB [mem 0xb24d6000-0xb64d6000] (64MB) mapped at [ffff8b74324d6000-ffff8b74364d5fff]
[ 0.724556] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2fbd93f9e57, max_idle_ns: 440795263784 ns
[ 0.724613] Scanning for low memory corruption every 60 seconds
[ 0.724856] audit: initializing netlink subsys (disabled)
[ 0.724903] audit: type=2000 audit(1533556887.724:1): state=initialized audit_enabled=0 res=1
[ 0.725141] Initialise system trusted keyrings
[ 0.725148] Key type blacklist registered
[ 0.725186] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 0.725885] zbud: loaded
[ 0.726223] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.726325] fuse init (API version 7.26)
[ 0.728567] Key type asymmetric registered
[ 0.728568] Asymmetric key parser 'x509' registered
[ 0.728586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.728625] io scheduler noop registered
[ 0.728625] io scheduler deadline registered
[ 0.728640] io scheduler cfq registered (default)
[ 0.729438] efifb: probing for efifb
[ 0.729446] efifb: framebuffer at 0xd0000000, using 3072k, total 3072k
[ 0.729447] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.729447] efifb: scrolling: redraw
[ 0.729448] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.729509] Console: switching to colour frame buffer device 128x48
[ 0.729518] fb0: EFI VGA frame buffer device
[ 0.729522] intel_idle: MWAIT substates: 0x142120
[ 0.729522] intel_idle: v0.4.1 model 0x5E
[ 0.729587] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.729686] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.729695] ACPI: Sleep Button [SLPB]
[ 0.729714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.729721] ACPI: Power Button [PWRB]
[ 0.729741] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.729789] ACPI: Power Button [PWRF]
[ 0.788736] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.848451] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.848452] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.848570] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.848571] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.848620] GHES: HEST is not enabled!
[ 0.848701] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.869542] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.872135] Linux agpgart interface v0.103
[ 0.873172] loop: module loaded
[ 0.873267] libphy: Fixed MDIO Bus: probed
[ 0.873267] tun: Universal TUN/TAP device driver, 1.6
[ 0.873316] PPP generic driver version 2.4.2
[ 0.873370] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.873371] ehci-pci: EHCI PCI platform driver
[ 0.873377] ehci-platform: EHCI generic platform driver
[ 0.873382] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.873383] ohci-pci: OHCI PCI platform driver
[ 0.873388] ohci-platform: OHCI generic platform driver
[ 0.873391] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.873521] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.873525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.874611] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[ 0.874615] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.874686] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.874687] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.874688] usb usb1: Product: xHCI Host Controller
[ 0.874689] usb usb1: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[ 0.874690] usb usb1: SerialNumber: 0000:00:14.0
[ 0.874779] hub 1-0:1.0: USB hub found
[ 0.874790] hub 1-0:1.0: 10 ports detected
[ 0.875476] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.875478] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.875501] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.875502] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.875503] usb usb2: Product: xHCI Host Controller
[ 0.875504] usb usb2: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[ 0.875505] usb usb2: SerialNumber: 0000:00:14.0
[ 0.875586] hub 2-0:1.0: USB hub found
[ 0.875593] hub 2-0:1.0: 4 ports detected
[ 0.876201] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.876204] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 0.876299] xhci_hcd 0000:04:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000090
[ 0.876376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.876377] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876378] usb usb3: Product: xHCI Host Controller
[ 0.876379] usb usb3: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[ 0.876380] usb usb3: SerialNumber: 0000:04:00.0
[ 0.876499] hub 3-0:1.0: USB hub found
[ 0.876505] hub 3-0:1.0: 1 port detected
[ 0.876545] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 0.876547] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 0.876557] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.876567] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.876568] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.876569] usb usb4: Product: xHCI Host Controller
[ 0.876570] usb usb4: Manufacturer: Linux 4.13.0-45-generic xhci-hcd
[ 0.876571] usb usb4: SerialNumber: 0000:04:00.0
[ 0.876679] hub 4-0:1.0: USB hub found
[ 0.876685] hub 4-0:1.0: 4 ports detected
[ 0.876769] i8042: PNP: No PS/2 controller found.
[ 0.877019] mousedev: PS/2 mouse device common for all mice
[ 0.877355] rtc_cmos 00:05: RTC can wake from S4
[ 0.877731] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.877812] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.877815] i2c /dev entries driver
[ 0.877850] device-mapper: uevent: version 1.0.3
[ 0.877882] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 0.877884] intel_pstate: Intel P-state driver initializing
[ 0.878017] intel_pstate: HWP enabled
[ 0.878050] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.878052] EFI Variables Facility v0.08 2004-May-17
[ 0.899867] NET: Registered protocol family 10
[ 0.903548] Segment Routing with IPv6
[ 0.903562] NET: Registered protocol family 17
[ 0.903568] Key type dns_resolver registered
[ 0.903723] RAS: Correctable Errors collector initialized.
[ 0.903744] microcode: sig=0x506e3, pf=0x2, revision=0xc2
[ 0.903800] microcode: Microcode Update Driver: v2.2.
[ 0.903891] sched_clock: Marking stable (903798113, 0)->(903508030, 290083)
[ 0.904160] registered taskstats version 1
[ 0.904168] Loading compiled-in X.509 certificates
[ 0.906190] Loaded X.509 cert 'Build time autogenerated kernel key: fec222083a1a40f2051f2b073ec28e5cb659a232'
[ 0.906666] Couldn't get size: 0x800000000000000e
[ 0.906668] MODSIGN: Couldn't get UEFI db list
[ 0.908986] Loaded UEFI:MokListRT cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' linked to secondary
sys keyring
[ 0.909224] Couldn't get size: 0x800000000000000e
[ 0.909225] MODSIGN: Couldn't get UEFI dbx list
[ 0.909238] zswap: loaded using pool lzo/zbud
[ 0.912510] Key type big_key registered
[ 0.912512] Key type trusted registered
[ 0.914042] Key type encrypted registered
[ 0.914045] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.914047] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 0.914059] evm: HMAC attrs: 0x1
[ 0.914931] Magic number: 14:694:25
[ 0.915122] rtc_cmos 00:05: setting system clock to 2018-08-06 12:01:28 UTC (1533556888)
[ 0.915168] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.915168] EDD information not available.
[ 0.915196] PM: Hibernation image not present or could not be loaded.
[ 0.916537] Freeing unused kernel memory: 2368K
[ 0.936312] Write protecting the kernel read-only data: 18432k
[ 0.936673] Freeing unused kernel memory: 2024K
[ 0.936858] Freeing unused kernel memory: 84K
[ 0.938134] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.938135] x86/mm: Checking user space page tables
[ 0.939344] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.990378] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.033395] ahci 0000:00:17.0: version 3.0
[ 1.035275] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.035279] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.043810] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.043812] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.044877] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffff9b104068d000, e0:d5:5e:13:fd:c1, XID 0c000800 IRQ 124
[ 1.044878] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.045825] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 1.058151] [drm] radeon kernel modesetting enabled.
[ 1.059814] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.059814] AMD IOMMUv2 functionality not available on this system
[ 1.062046] CRAT table not found
[ 1.062047] Finished initializing topology ret=0
[ 1.062053] kfd kfd: Initialized module
[ 1.062180] checking generic (d0000000 300000) vs hw (d0000000 10000000)
[ 1.062181] fb: switching to radeondrmfb from EFI VGA
[ 1.062197] Console: switching to colour dummy device 80x25
[ 1.062400] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1043:0x03DA 0x00).
[ 1.062453] ATOM BIOS: 6779.13.12.0.0.AS02
[ 1.062950] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[ 1.062951] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[ 1.062953] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 1.062954] [drm] RAM width 64bits DDR
[ 1.062987] [TTM] Zone kernel: Available graphics memory: 1998878 kiB
[ 1.062988] [TTM] Initializing pool allocator
[ 1.062990] [TTM] Initializing DMA pool allocator
[ 1.063005] [drm] radeon: 1024M of VRAM memory ready
[ 1.063005] [drm] radeon: 1024M of GTT memory ready.
[ 1.063010] [drm] Loading CAICOS Microcode
[ 1.063058] [drm] Internal thermal controller without fan control
[ 1.067316] [drm] radeon: dpm initialized
[ 1.067366] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 1.067855] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[ 1.080954] scsi host0: ahci
[ 1.081125] scsi host1: ahci
[ 1.081282] scsi host2: ahci
[ 1.081436] scsi host3: ahci
[ 1.081460] ata1: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b100 irq 123
[ 1.081461] ata2: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b180 irq 123
[ 1.081463] ata3: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b200 irq 123
[ 1.081465] ata4: SATA max UDMA/133 abar m2048@0xeff2b000 port 0xeff2b280 irq 123
[ 1.088146] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[ 1.088252] radeon 0000:01:00.0: WB enabled
[ 1.088254] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff8b74aea9cc00
[ 1.088255] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff8b74aea9cc0c
[ 1.088998] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffff9b1041032118
[ 1.088999] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.088999] [drm] Driver supports precise vblank timestamp query.
[ 1.089000] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[ 1.089030] radeon 0000:01:00.0: radeon: using MSI.
[ 1.089050] [drm] radeon: irq initialized.
[ 1.105440] [drm] ring test on 0 succeeded in 3 usecs
[ 1.105449] [drm] ring test on 3 succeeded in 6 usecs
[ 1.200059] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.204049] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 1.281139] [drm] ring test on 5 succeeded in 2 usecs
[ 1.281147] [drm] UVD initialized successfully.
[ 1.281335] [drm] ib test on ring 0 succeeded in 0 usecs
[ 1.281449] [drm] ib test on ring 3 succeeded in 0 usecs
[ 1.341316] usb 1-3: New USB device found, idVendor=03f0, idProduct=3d17
[ 1.341317] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.341318] usb 1-3: Product: HP LaserJet P1005
[ 1.341319] usb 1-3: Manufacturer: Hewlett-Packard
[ 1.341320] usb 1-3: SerialNumber: BC1GKXP
[ 1.346270] usb 3-1: New USB device found, idVendor=2109, idProduct=3431
[ 1.346271] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.346272] usb 3-1: Product: USB2.0 Hub
[ 1.346692] hub 3-1:1.0: USB hub found
[ 1.346982] hub 3-1:1.0: 4 ports detected
[ 1.395189] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.395205] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.395218] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.395231] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.396115] ata3.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
[ 1.396116] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.396179] ata1.00: ATA-8: ST3500312CS, SS16, max UDMA/133
[ 1.396180] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.396323] ata4.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
[ 1.397079] ata3.00: configured for UDMA/133
[ 1.397321] ata1.00: configured for UDMA/133
[ 1.397472] scsi 0:0:0:0: Direct-Access ATA ST3500312CS SS16 PQ: 0 ANSI: 5
[ 1.397751] ata4.00: configured for UDMA/133
[ 1.423797] ata2.00: ATA-8: ST3320613AS, SD22, max UDMA/133
[ 1.423798] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.460120] usb 1-6: new low-speed USB device number 3 using xhci_hcd
[ 1.464429] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 1.464435] sd 0:0:0:0: [sda] Write Protect is off
[ 1.464437] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.464443] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.464690] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.465832] ata2.00: configured for UDMA/133
[ 1.466165] scsi 1:0:0:0: Direct-Access ATA ST3320613AS SD22 PQ: 0 ANSI: 5
[ 1.496470] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.496528] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.496539] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.496540] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.496562] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.496658] scsi 2:0:0:0: Direct-Access ATA ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
[ 1.517076] sda: sda1 sda2 sda3 sda4
[ 1.517865] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.520447] sdb: sdb1
[ 1.520975] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.532408] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 1.532453] sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.532455] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 1.532466] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.532467] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.532488] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.533291] scsi 3:0:0:0: CD-ROM ASUS DRW-24D5MT 1.00 PQ: 0 ANSI: 5
[ 1.559425] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.559426] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.559512] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.559564] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 1.579356] sdc: sdc1
[ 1.579921] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.605417] usb 1-6: New USB device found, idVendor=1c4f, idProduct=0002
[ 1.605419] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.605420] usb 1-6: Product: USB Keyboard
[ 1.605421] usb 1-6: Manufacturer: SIGMACHIP
[ 1.611913] usbcore: registered new interface driver usbhid
[ 1.611914] usbhid: USB HID core driver
[ 1.612899] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:1C4F:0002.0001/input/input3
[ 1.672172] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input0
[ 1.672286] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.1/0003:1C4F:0002.0002/input/input4
[ 1.724029] usb 1-7: new high-speed USB device number 4 using xhci_hcd
[ 1.732137] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-6/input1
[ 1.756104] clocksource: Switched to clocksource tsc
[ 1.948080] [drm] ib test on ring 5 succeeded
[ 1.948555] [drm] Radeon Display Connectors
[ 1.948556] [drm] Connector 0:
[ 1.948556] [drm] HDMI-A-1
[ 1.948556] [drm] HPD1
[ 1.948558] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[ 1.948558] [drm] Encoders:
[ 1.948558] [drm] DFP1: INTERNAL_UNIPHY1
[ 1.948559] [drm] Connector 1:
[ 1.948559] [drm] DVI-D-1
[ 1.948560] [drm] HPD4
[ 1.948560] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[ 1.948561] [drm] Encoders:
[ 1.948561] [drm] DFP2: INTERNAL_UNIPHY
[ 1.948561] [drm] Connector 2:
[ 1.948562] [drm] VGA-1
[ 1.948563] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[ 1.948563] [drm] Encoders:
[ 1.948563] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 2.002530] [drm] fb mappable at 0xD0363000
[ 2.002531] [drm] vram apper at 0xD0000000
[ 2.002531] [drm] size 5242880
[ 2.002531] [drm] fb depth is 24
[ 2.002532] [drm] pitch is 5120
[ 2.002593] fbcon: radeondrmfb (fb0) is primary device
[ 2.002631] Console: switching to colour frame buffer device 160x64
[ 2.002646] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 2.016378] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[ 2.036208] usb 1-7: New USB device found, idVendor=050d, idProduct=705a
[ 2.036210] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.036211] usb 1-7: Product: Belkin 54g USB Network Adapter
[ 2.036212] usb 1-7: Manufacturer: Belkin
[ 2.156286] usb 1-8: new full-speed USB device number 5 using xhci_hcd
[ 2.298039] usb 1-8: New USB device found, idVendor=046d, idProduct=c534
[ 2.298041] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.298042] usb 1-8: Product: USB Receiver
[ 2.298043] usb 1-8: Manufacturer: Logitech
[ 2.299900] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/0003:046D:C534.0003/input/input5
[ 2.356315] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-8/input0
[ 2.358217] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.1/0003:046D:C534.0004/input/input6
[ 2.416393] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-8/input1
[ 2.481818] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.030612] random: crng init done
[ 4.191312] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNU
TLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 4.208112] systemd[1]: Detected architecture x86-64.
[ 4.220783] systemd[1]: Set hostname to <dimitris-H110M-DS2>.
[ 5.686138] systemd[1]: Reached target Encrypted Volumes.
[ 5.686260] systemd[1]: Listening on Journal Audit Socket.
[ 5.686296] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.686302] systemd[1]: Reached target User and Group Name Lookups.
[ 5.686307] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.686311] systemd[1]: Reached target Remote File Systems.
[ 5.686331] systemd[1]: Listening on udev Kernel Socket.
[ 6.382565] lp: driver loaded but no devices found
[ 6.426095] ppdev: user-space parallel port driver
[ 6.441217] parport_pc 00:01: reported by Plug and Play ACPI
[ 6.441262] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[ 6.536239] lp0: using parport0 (interrupt-driven).
[ 14.050551] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 14.070289] systemd-journald[293]: Received request to flush runtime journal from PID 1
[ 14.173976] Bluetooth: Core ver 2.22
[ 14.173986] NET: Registered protocol family 31
[ 14.173986] Bluetooth: HCI device and connection manager initialized
[ 14.173988] Bluetooth: HCI socket layer initialized
[ 14.173989] Bluetooth: L2CAP socket layer initialized
[ 14.173993] Bluetooth: SCO socket layer initialized
[ 14.195619] Bluetooth: HCI UART driver ver 2.3
[ 14.195621] Bluetooth: HCI UART protocol H4 registered
[ 14.195621] Bluetooth: HCI UART protocol BCSP registered
[ 14.195635] Bluetooth: HCI UART protocol LL registered
[ 14.195636] Bluetooth: HCI UART protocol ATH3K registered
[ 14.195636] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 14.195653] Bluetooth: HCI UART protocol Intel registered
[ 14.195659] Bluetooth: HCI UART protocol Broadcom registered
[ 14.195660] Bluetooth: HCI UART protocol QCA registered
[ 14.195660] Bluetooth: HCI UART protocol AG6XX registered
[ 14.195661] Bluetooth: HCI UART protocol Marvell registered
[ 14.216408] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.217926] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 14.283757] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[ 14.284994] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 14.296999] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 14.303022] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 14.303024] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.303025] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 14.303026] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 14.303027] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0
[ 14.303028] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 14.303029] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 14.303030] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 14.303031] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 14.319396] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 14.319426] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 14.319453] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[ 14.319480] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[ 14.319504] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[ 14.673667] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 14.673668] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 14.673668] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 14.673669] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 14.673669] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 14.673669] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 14.683387] SSE version of gcm_enc/dec engaged.
[ 14.724211] intel_rapl: Found RAPL domain package
[ 14.724212] intel_rapl: Found RAPL domain core
[ 14.724213] intel_rapl: Found RAPL domain dram
[ 15.520240] usb 1-7: reset high-speed USB device number 4 using xhci_hcd
[ 15.990295] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev: 000a
[ 15.994797] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 15.995299] usbcore: registered new interface driver rt73usb
[ 15.997029] rt73usb 1-7:1.0 wlx001cdf5832a5: renamed from wlan0
[ 16.045243] Adding 7819260k swap on /dev/sda4. Priority:-1 extents:1 across:7819260k FS
[ 16.816177] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 16.959339] audit: type=1400 audit(1533556904.544:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=792
comm="apparmor_parser"
[ 16.959342] audit: type=1400 audit(1533556904.544:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager
/nm-dhcp-client.action" pid=792 comm="apparmor_parser"
[ 16.959343] audit: type=1400 audit(1533556904.544:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager
/nm-dhcp-helper" pid=792 comm="apparmor_parser"
[ 16.959344] audit: type=1400 audit(1533556904.544:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/script
s/dhclient-script" pid=792 comm="apparmor_parser"
[ 16.964862] audit: type=1400 audit(1533556904.549:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=79
3 comm="apparmor_parser"
[ 16.964865] audit: type=1400 audit(1533556904.549:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//saniti
zed_helper" pid=793 comm="apparmor_parser"
[ 16.964867] audit: type=1400 audit(1533556904.549:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-preview
er" pid=793 comm="apparmor_parser"
[ 16.964869] audit: type=1400 audit(1533556904.549:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-preview
er//sanitized_helper" pid=793 comm="apparmor_parser"
[ 16.964870] audit: type=1400 audit(1533556904.549:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbn
ailer" pid=793 comm="apparmor_parser"
[ 16.964871] audit: type=1400 audit(1533556904.549:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-thumbn
ailer//sanitized_helper" pid=793 comm="apparmor_parser"
[ 21.264437] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[ 21.264469] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt73.bin'
[ 21.347618] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 1.7
[ 21.402625] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[ 21.404664] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 21.474564] r8169 0000:02:00.0 enp2s0: link down
[ 21.474609] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 21.907008] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[ 25.097672] usblp 1-3:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[ 25.097752] usbcore: registered new interface driver usblp
[ 27.074590] vboxdrv: loading out-of-tree module taints kernel.
[ 27.074703] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 27.080038] vboxdrv: Found 2 processor cores
[ 27.100560] vboxdrv: TSC mode is Invariant, tentative frequency 3311997474 Hz
[ 27.100560] vboxdrv: Successfully loaded version 5.1.34_Ubuntu (interface 0x002a0000)
[ 27.106454] VBoxNetFlt: Successfully started.
[ 27.109826] VBoxNetAdp: Successfully started.
[ 27.113551] VBoxPciLinuxInit
[ 27.115372] vboxpci: IOMMU not found (not registered)
[ 30.121858] usblp1: removed
[ 30.126799] usblp 1-3:1.0: usblp1: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3D17
[ 33.559413] IPv6: ADDRCONF(NETDEV_UP): wlx001cdf5832a5: link is not ready
[ 37.973508] usb usb1-port7: disabled by hub (EMI?), re-enabling...
[ 37.973513] usb 1-7: USB disconnect, device number 4
[ 37.973565] ieee80211 phy0: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x308c with e
[ 49.029927] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 49.029928] Bluetooth: BNEP filters: protocol multicast
[ 49.029931] Bluetooth: BNEP socket layer initialized
[ 56.179265] kauditd_printk_skb: 15 callbacks suppressed
[ 56.179266] audit: type=1400 audit(1533556943.764:27): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq
="/proc/1549/status" pid=1549 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 56.179268] audit: type=1400 audit(1533556943.764:28): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq
="/sys/devices/system/node/" pid=1549 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 56.179312] audit: type=1400 audit(1533556943.764:29): apparmor="DENIED" operation="open" profile="/usr/sbin/mysq
="/proc/1549/status" pid=1549 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
dimitris@dimitris-H110M-DS2:~$