Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άνοιγε

...εγκαταστάσεις, αναβαθμίσεις, διαχείριση partitions, boot-loader, κλπ

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Στην ενότητα αυτή γράφουμε θέματα/ προβλήματα μόνο για το UBUNTU ή τα παράγωγά του.

Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άνοιγε

Δημοσίευσηαπό tvmiros » 13 Ιαν 2018, 00:11

Εχθές το βράδυ έβγαλε το σύστημα μου έβγαλε να τρέχω κάποιες ενημερώσεις, στην έκδοση 16.04 έκανα ενημέρωση τον υπολογιστή μου και όταν έκανα αναβάθμιση δεν άνοιγε το λειτουργικό.
Μίλησα το πρωί σήμερα με την Dell κάναμε τα απαραίτητα τεστ στο λαπτοπ και όπως με ενημέρωσαν το πρόβλημα δεν ήταν με τον δίσκο μου όπως νόμιζα μιας και ο υπολογιστής είναι σχετικά νέος 6 μηνών, αλλά με το λειτουργικό.
Και όντος το λειτουργικό μου είναι σε καλή κατάσταση και ο δίσκος λειτουργεί, άγνωστο γιατί το λειτουργικό χτύπησε.

Μήπως ξέρετε αν υπάρχει όντος πρόβλημα με την έκδοση 16.04 ;
tvmiros
babeTUX
babeTUX
 
Δημοσιεύσεις: 111
Εγγραφή: 01 Νοέμ 2008, 16:39
Τοποθεσία: Θεσσαλονικη
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό dim459 » 13 Ιαν 2018, 14:07

Έτσι όπως το θέτεις, είναι λίγο δύσκολο να λάβεις εμπεριστατωμένη απάντηση.
Γενικώς δεν υπάρχει πρόβλημα με την 16.04.
Καλό θα ήταν να περιγράψεις αναλυτικότερα μέχρι που φτάνει όταν φορτώνει το λειτουργικό και τυχόν μηνύματα που σου βγάζει ή εν πάση περιπτώσει ότι άλλο κρίνεις ότι μπορεί να περιγράψει το πρόβλημα.
Γνώσεις ⇛ Linux: Αν μου δώσεις οδηγίες σε τερματικό δεν τρομάζω ┃ Προγραμματισμός: Καθόλου┃ Αγγλικά: Εξαιρετικά
Λειτουργικό : Πάντα την τρέχουσα έκδοση ubuntu/kubuntu 64bit και σε κάποια pc 12.04 32bit
Συσκευές-> Πάρα πολλές, θα στο γράψω ανά περίπτωση.
Άβαταρ μέλους
dim459
superbTUX
superbTUX
 
Δημοσιεύσεις: 3661
Εγγραφή: 15 Φεβ 2009, 19:28
Τοποθεσία: Bόρεια Αττική
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό Tassos10 » 14 Ιαν 2018, 12:10

Χαίρεται φίλε.

Βρε παλικάρι, έτσι όπως μας τα λες, όπως σου λέει και ο φίλος @dim459 δεν μπορεί κάποιος να σου πει και πολλά. Πρέπει να είσαι ιδιαίτερα αναλυτικός ώστε να μας μεταφέρεις μια όσο το δυνατόν καλύτερη εικόνα στο τι συμβαίνει στο σύστημα σου.

Off topic:
Πάντως για να έχουμε πιο άμεσα & γενικά καλύτερη εικόνα, δες τον οδηγό «Πληροφορίες και οδηγίες προς νεοεισερχόμενους στο forum» και συγκεκριμένα, κάνε την υπογραφή σου.

Ισοτρικά, πρόσφατα εμφανίστηκαν δύο τεράστια bug - κενά ασφαλείας ( ένα κυρίως και κατ' ουσία τρεις επεκτάσεις του ) τα λεγόμενα Spectre & Meltdown ( CVE-2017-5715, CVE-2017-5753, CVE-2017-5754 ) τα οποία έχουν να κάνουν με την αρχιτεκτονική των επεξεργαστών και επηρεάζουν μια τεράστια γκάμα αυτών ( ακόμη και επεξεργαστών 25 χρονών ) με κυρίους αποδέκτες ( επέτειος ) την Intel όπου και επηρεάζει το πλήθος των επεξεργαστών της, έστω ξόφλατσα βέβαια δεν μπόρεσε να αποφύγει πλήρως το τον κυκλώνα και να μην την ακουμπήσει όλο αυτό λίγο και την AMD - έστω και πολύ λίγο, σε πολύ λίγους επεξεργαστές.

Έτσι απαξάπαντες έτρεξαν να βγάλουν ενημερώσεις ασφαλείας, το πρόβλημα όμως είναι πως βγήκαν κάποια patches - κάποιες διορθώσεις, πολύ γρήγορα και από ότι φάνηκε δημιούργησαν περαιτέρω προβλήματα στους χρήστες. Με πολλούς από αυτούς να διαμαρτύρονται πως εφόσον έκανα τις ενημερώσεις πλέον δεν μπορούσαν να εκκινήσουν τους υπολογιστές τους.

Ένα από αυτούς είμαι και εγώ. Εφόσον έκανα εγκατάσταση του νέου kernel «linux-image-3.16.0-5-amd64» που μου ήρθε στο φορητό μου υπολογιστή έπειτα με αυτό το kernel δε μπορούσε να φορτώσει το λειτουργικό - ούτε καν μέσω recovery mode. Όμως αν κατά την εκκίνηση στο grub menu, πας και επιλέξεις «Advance options..» τότε στο επόμενο μενού σου δίνει την δυνατότητα να επιλέξεις με ποιο
Το μήνυμα που έπαιρνα κατά την αποτυχημένη εκκίνηση του Debian 8 με GNU/Linux : linux-image-3.16.0-5-amd64. Η εκκίνηση σταματάει εκεί και δεν συνεχίζει.
Spoiler: show
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 12.04 precise 3.2.0-50-generic 64bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.2.0-49-generic
3 Intel Core2 Quad CPU Q9400 2.66GHz ‖ RAM 3954 MiB ‖ ASRock G31M-S
4 nVidia G92 [GeForce 9800 GT] [10de:0614] {nvidia}
5 eth0: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Tassos10
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 435
Εγγραφή: 29 Μαρ 2010, 10:43
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό the_eye » 14 Ιαν 2018, 16:39

@Tassos10
Στο σημείο που σου σταματάει έχει φορτωθεί προ πολλού ο kernel και φορτώνει τα services.

Το ποιο συχνό φαινόμενο που δεν φορτώνει γραφικό περιβάλλον είναι γιατί υπάρχει κάποιος κλειστός οδηγός που δεν έχει αφαιρεθεί πριν την αναβάθμιση.
Οι κλειστοί οδηγοί δεν αναβαθμίζονται μαζί με τον kernel, οπότε τους αφαιρούμε αναβαθμίζουμε τον kernel και μετά τους ξαναπερνάμε.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα στο GNU/Linux.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 16.04 xenial 4.15.0-24-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11280
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό Tassos10 » 14 Ιαν 2018, 17:35

the_eye έγραψε:@Tassos10
Στο σημείο που σου σταματάει έχει φορτωθεί προ πολλού ο kernel και φορτώνει τα services.

Το ποιο συχνό φαινόμενο που δεν φορτώνει γραφικό περιβάλλον είναι γιατί υπάρχει κάποιος κλειστός οδηγός που δεν έχει αφαιρεθεί πριν την αναβάθμιση.
Οι κλειστοί οδηγοί δεν αναβαθμίζονται μαζί με τον kernel, οπότε τους αφαιρούμε αναβαθμίζουμε τον kernel και μετά τους ξαναπερνάμε.

Ωπ! Τι λες ρε φίλε! Δεν είχα ιδέα για αυτό το πράγμα!! Πείτε το κάπου δηλαδή! :P
Μπορεί να φταίνε οι οδηγεί της nVidia ( διότι το Debian οι οδηγοί γραφικών του όταν το συνέδεα σε δεύτερη οθόνη δεν έστελναν εικόνα και έτσι αναγκάτστικά να εγκαταστήσω της nVidia )

Πολύ μου άρεσε η παρατήρηση σου, σε ευχαριστώ πολύ! Ήταν κάτι που δεν το ήξερα και μου αρέσει κάθε φορά να μαθαίνω όλο και περισσότερο το GNU/Linux!
( Αν και πόσα χρόνια χρήστης, τώρα με άφησες άναυδο! :shock: )
Spoiler: show
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 12.04 precise 3.2.0-50-generic 64bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.2.0-49-generic
3 Intel Core2 Quad CPU Q9400 2.66GHz ‖ RAM 3954 MiB ‖ ASRock G31M-S
4 nVidia G92 [GeForce 9800 GT] [10de:0614] {nvidia}
5 eth0: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Tassos10
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 435
Εγγραφή: 29 Μαρ 2010, 10:43
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό the_eye » 14 Ιαν 2018, 17:48

Μα είναι λογικό. Ο νέος kernel έρχεται από το αποθετήριο της διανομής. Ο κλειστός driver είναι κάτι που βάζει ο χρήστης και δεν υπάρχει στο αποθετήριο, οπότε που θα βρει ο νέος kernel τα νέα modules για να δουλέψει ;
Αν αφαιρέσουμε τον κλειστό οδηγό, θα φορτώσει το γραφικό περιβάλλον με τον ανοιχτό οδηγό που υπάρχει στο αποθετήριο ;)

Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα στο linux.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα στο GNU/Linux.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 16.04 xenial 4.15.0-24-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11280
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό Tassos10 » 21 Ιαν 2018, 18:38

Όντως, προσωπικά εφόσον πλέον κατάφερα να διαγράψω επιτυχώς τους κλειστούς οδηγούς της nvidia, και να έχω μονάχα τους ανοιχτούς, διέγραψα την τελευταία έκδοση του kernel ( που με αυτή είχα το πρόβλημα στην εκκίνηση ) :

Κώδικας: Επιλογή όλων
apt-get purge linux-image-3.16.0-5-amd64


Κώδικας: Επιλογή όλων
apt-get autoremove && apt-get autoclean && apt-get clean


Κώδικας: Επιλογή όλων
sudo update-grub


έκανα μια επανεκκίνηση και συνδέθηκα με την προηγούμενο έκδοση του kernel :

Κώδικας: Επιλογή όλων
shutdown -r now


και έπειτα ξανά εγκατέστησα το kernel manager και αυτός με την σειρά του εγκατέστησε και την τελευταία έκδοση του kernel ( που πριν αυτή είχε πρόβλημα )
Κώδικας: Επιλογή όλων
apt-get install linux-image-amd64


Πλέον όμως, όλα λειτουργούν άψογα με τον τελευταίο πυρήνα! Τίποτα δεν διακόπτει την εκκίνηση του λειτουργικού συστήματος μαζί με το γραφικό περιβάλλον. :)

Επειδή και πάλι όμως μου φάνηκε πως κάτι γράφει κατά την εκκίνηση, αλλά προσπερνάτε αμέσως χωρίς να σταθεί ( δεν πρόλαβα ούτε φωτογραφία να το βγάλω ), μπορώ από κάπου να δω τα logs της εκκίνησης ;
Όλα αυτά που τρέχουν κατά την εκκίνηση ( και τα δείχνει στην οθόνη αλλά προσπερνούντε πολύ γρήγορα ) ;

Ευχαριστώ πάρα πολύ όλους σας και ιδιαίτερα εσένα @the_eye! :)

Υ.Σ. : Τελικά ο φίλος που άνοιξε το θέμα, να βρήκε λύση στο πρόβλημα του; :P
Spoiler: show
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 12.04 precise 3.2.0-50-generic 64bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.2.0-49-generic
3 Intel Core2 Quad CPU Q9400 2.66GHz ‖ RAM 3954 MiB ‖ ASRock G31M-S
4 nVidia G92 [GeForce 9800 GT] [10de:0614] {nvidia}
5 eth0: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Tassos10
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 435
Εγγραφή: 29 Μαρ 2010, 10:43
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό the_eye » 21 Ιαν 2018, 20:51

Tassos10 έγραψε:μπορώ από κάπου να δω τα logs της εκκίνησης ;

Στο τερματικό τρέξε dmesg
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα στο GNU/Linux.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 16.04 xenial 4.15.0-24-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11280
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό Tassos10 » 22 Ιαν 2018, 10:18

Όλα αυτά τα logs είναι μονάχα της τελευταίας εκκίνησης ;
Μου επιστρέφει αυτά :
Κώδικας: Επιλογή όλων
dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-5-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.51-3+deb8u1 (2018-01-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=6db966e5-4375-4da4-ad2a-3b586ff5f0de ro quiet
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000be625fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000be626000-0x00000000be628fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000be629000-0x00000000bfca7fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfca8000-0x00000000bfcbefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bfcbf000-0x00000000bfd85fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfd86000-0x00000000bfdbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfde9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfdea000-0x00000000bfdfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bfe00000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bfffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Pavilion dv5 Notebook PC/3603, BIOS F.0C 09/18/2008
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x1c0000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FC0000000 write-back
[    0.000000]   2 base 0BFE00000 mask FFFE00000 uncachable
[    0.000000]   3 base 100000000 mask F80000000 write-back
[    0.000000]   4 base 180000000 mask FC0000000 write-back
[    0.000000]   5 disabled
[    0.000000]   6 base 0FFFE0000 mask FFFFE0000 write-protect
[    0.000000]   7 base 0FFFD8000 mask FFFFF8000 write-protect
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01aff000, 0x01afffff] PGTABLE
[    0.000000] BRK [0x01b00000, 0x01b00fff] PGTABLE
[    0.000000] BRK [0x01b01000, 0x01b01fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bfe00000-0x1bfffffff]
[    0.000000]  [mem 0x1bfe00000-0x1bfffffff] page 2M
[    0.000000] BRK [0x01b02000, 0x01b02fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x1bc000000-0x1bfdfffff]
[    0.000000]  [mem 0x1bc000000-0x1bfdfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x180000000-0x1bbffffff]
[    0.000000]  [mem 0x180000000-0x1bbffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbe625fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbe5fffff] page 2M
[    0.000000]  [mem 0xbe600000-0xbe625fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbe629000-0xbfca7fff]
[    0.000000]  [mem 0xbe629000-0xbe7fffff] page 4k
[    0.000000]  [mem 0xbe800000-0xbfbfffff] page 2M
[    0.000000]  [mem 0xbfc00000-0xbfca7fff] page 4k
[    0.000000] BRK [0x01b03000, 0x01b03fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbfcbf000-0xbfd85fff]
[    0.000000]  [mem 0xbfcbf000-0xbfd85fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfdbf000-0xbfde9fff]
[    0.000000]  [mem 0xbfdbf000-0xbfde9fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbfdff000-0xbfdfffff]
[    0.000000]  [mem 0xbfdff000-0xbfdfffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x17fffffff]
[    0.000000]  [mem 0x100000000-0x17fffffff] page 2M
[    0.000000] BRK [0x01b04000, 0x01b04fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36300000-0x37177fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000BFDFE120 000064 (v01 HPQOEM SLIC-MPC 00000001      01000013)
[    0.000000] ACPI: FACP 0x00000000BFDFD000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: DSDT 0x00000000BFDED000 00B5FA (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: FACS 0x00000000BFD92000 000040
[    0.000000] ACPI: FACS 0x00000000BFD92000 000040
[    0.000000] ACPI: HPET 0x00000000BFDFC000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: APIC 0x00000000BFDFB000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: MCFG 0x00000000BFDFA000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: ASF! 0x00000000BFDF9000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SLIC 0x00000000BFDEC000 000176 (v01 HPQOEM SLIC-MPC 06040000  LTP 00000001)
[    0.000000] ACPI: BOOT 0x00000000BFDEB000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[    0.000000] ACPI: SSDT 0x00000000BFDEA000 000655 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bfffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x1bfffffff]
[    0.000000]   NODE_DATA [mem 0x1bfff7000-0x1bfffbfff]
[    0.000000]  [ffffea0000000000-ffffea00061fffff] PMD -> [ffff8801b9600000-ffff8801be9fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x1bfffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xbe625fff]
[    0.000000]   node   0: [mem 0xbe629000-0xbfca7fff]
[    0.000000]   node   0: [mem 0xbfcbf000-0xbfd85fff]
[    0.000000]   node   0: [mem 0xbfdbf000-0xbfde9fff]
[    0.000000]   node   0: [mem 0xbfdff000-0xbfdfffff]
[    0.000000]   node   0: [mem 0x100000000-0x1bfffffff]
[    0.000000] On node 0 totalpages: 1572149
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10688 pages used for memmap
[    0.000000]   DMA32 zone: 781720 pages, LIFO batch:31
[    0.000000]   Normal zone: 10752 pages used for memmap
[    0.000000]   Normal zone: 786432 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbe626000-0xbe628fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfca8000-0xbfcbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfd86000-0xbfdbefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfdea000-0xbfdfefff]
[    0.000000] PM: Registered nosave memory: [mem 0xbfe00000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff8801bfc00000 s84032 r8192 d22464 u524288
[    0.000000] pcpu-alloc: s84032 r8192 d22464 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1550632
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-5-amd64 root=UUID=6db966e5-4375-4da4-ad2a-3b586ff5f0de ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 6109608K/6288596K available (5291K kernel code, 969K rwdata, 1836K rodata, 1224K init, 840K bss, 178988K reserved)
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]    RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:33024 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2393.924 MHz processor
[    0.004013] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.84 BogoMIPS (lpj=9575696)
[    0.004016] pid_max: default: 32768 minimum: 301
[    0.004027] ACPI: Core revision 20140424
[    0.014174] ACPI: All ACPI Tables successfully acquired
[    0.014211] Security Framework initialized
[    0.014224] AppArmor: AppArmor disabled by boot time parameter
[    0.014225] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.014845] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.018873] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.020837] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.020851] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.021248] Initializing cgroup subsys memory
[    0.021257] Initializing cgroup subsys devices
[    0.021267] Initializing cgroup subsys freezer
[    0.021271] Initializing cgroup subsys net_cls
[    0.021277] Initializing cgroup subsys blkio
[    0.021282] Initializing cgroup subsys perf_event
[    0.021285] Initializing cgroup subsys net_prio
[    0.021317] CPU: Physical Processor ID: 0
[    0.021318] CPU: Processor Core ID: 0
[    0.021320] mce: CPU supports 6 MCE banks
[    0.021328] CPU0: Thermal monitoring enabled (TM1)
[    0.021332] process: using mwait in idle threads
[    0.021337] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.021435] Freeing SMP alternatives memory: 20K (ffffffff81a26000 - ffffffff81a2b000)
[    0.024009] ftrace: allocating 21713 entries in 85 pages
[    0.032403] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.074884] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz (fam: 06, model: 17, stepping: 06)
[    0.076000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.076000] ... version:                2
[    0.076000] ... bit width:              40
[    0.076000] ... generic registers:      2
[    0.076000] ... value mask:             000000ffffffffff
[    0.076000] ... max period:             000000007fffffff
[    0.076000] ... fixed-purpose events:   3
[    0.076000] ... event mask:             0000000700000003
[    0.076000] x86: Booting SMP configuration:
[    0.076000] .... node  #0, CPUs:      #1
[    0.087066] x86: Booted up 1 node, 2 CPUs
[    0.087070] smpboot: Total of 2 processors activated (9575.69 BogoMIPS)
[    0.087179] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.088158] devtmpfs: initialized
[    0.096019] PM: Registering ACPI NVS region [mem 0xbe626000-0xbe628fff] (12288 bytes)
[    0.096022] PM: Registering ACPI NVS region [mem 0xbfd86000-0xbfdbefff] (233472 bytes)
[    0.096114] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.097146] pinctrl core: initialized pinctrl subsystem
[    0.097233] NET: Registered protocol family 16
[    0.097367] cpuidle: using governor ladder
[    0.097370] cpuidle: using governor menu
[    0.097409] ACPI: bus type PCI registered
[    0.097411] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.097506] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.097509] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.097610] PCI: Using configuration type 1 for base access
[    0.097818] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.097819] mtrr: probably your BIOS does not setup all CPUs.
[    0.097820] mtrr: corrected configuration.
[    0.108076] ACPI: Added _OSI(Module Device)
[    0.108076] ACPI: Added _OSI(Processor Device)
[    0.108076] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.108076] ACPI: Added _OSI(Processor Aggregator Device)
[    0.110864] ACPI: Executed 1 blocks of module-level executable AML code
[    0.112447] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.288355] ACPI: Dynamic OEM Table Load:
[    0.288362] ACPI: SSDT 0xFFFF8801B84AA000 000265 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.288869] ACPI: Dynamic OEM Table Load:
[    0.288875] ACPI: SSDT 0xFFFF8801BF149800 000537 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.312243] ACPI: Dynamic OEM Table Load:
[    0.312250] ACPI: SSDT 0xFFFF8801B84A8400 0001CF (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.324088] ACPI: Dynamic OEM Table Load:
[    0.324094] ACPI: SSDT 0xFFFF8801B84B0D00 00008D (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.336131] ACPI: Interpreter enabled
[    0.336139] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[    0.336146] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.336165] ACPI: (supports S0 S3 S4 S5)
[    0.336167] ACPI: Using IOAPIC for interrupt routing
[    0.336196] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.347163] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.347163] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.347163] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
[    0.347163] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.348427] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.348599] PCI host bridge to bus 0000:00
[    0.348603] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.348605] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.348607] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.348609] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.348611] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.348620] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[    0.348639] DMAR: Forcing write-buffer flush capability
[    0.348641] DMAR: Disabling IOMMU for graphics on this chipset
[    0.348724] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[    0.348765] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.348877] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[    0.348928] pci 0000:00:1a.0: reg 0x20: [io  0xa0e0-0xa0ff]
[    0.349049] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[    0.349100] pci 0000:00:1a.1: reg 0x20: [io  0xa0c0-0xa0df]
[    0.349232] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[    0.349257] pci 0000:00:1a.7: reg 0x10: [mem 0xdf305c00-0xdf305fff]
[    0.349362] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.349462] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[    0.349482] pci 0000:00:1b.0: reg 0x10: [mem 0xdf300000-0xdf303fff 64bit]
[    0.349569] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.349659] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[    0.349749] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.349844] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[    0.349934] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.349982] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.350036] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[    0.350121] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.350214] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[    0.350298] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.350391] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[    0.350482] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.350576] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[    0.350667] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.350714] pci 0000:00:1c.5: System wakeup disabled by ACPI
[    0.350767] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[    0.350817] pci 0000:00:1d.0: reg 0x20: [io  0xa0a0-0xa0bf]
[    0.350939] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[    0.350989] pci 0000:00:1d.1: reg 0x20: [io  0xa080-0xa09f]
[    0.351109] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[    0.351160] pci 0000:00:1d.2: reg 0x20: [io  0xa060-0xa07f]
[    0.351279] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[    0.351330] pci 0000:00:1d.3: reg 0x20: [io  0xa040-0xa05f]
[    0.351458] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[    0.351483] pci 0000:00:1d.7: reg 0x10: [mem 0xdf305800-0xdf305bff]
[    0.351589] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.351680] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.351774] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.351826] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[    0.352024] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[    0.352046] pci 0000:00:1f.2: reg 0x10: [io  0xa108-0xa10f]
[    0.352055] pci 0000:00:1f.2: reg 0x14: [io  0xa114-0xa117]
[    0.352065] pci 0000:00:1f.2: reg 0x18: [io  0xa100-0xa107]
[    0.352074] pci 0000:00:1f.2: reg 0x1c: [io  0xa110-0xa113]
[    0.352083] pci 0000:00:1f.2: reg 0x20: [io  0xa020-0xa03f]
[    0.352093] pci 0000:00:1f.2: reg 0x24: [mem 0xdf305000-0xdf3057ff]
[    0.352149] pci 0000:00:1f.2: PME# supported from D3hot
[    0.352239] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[    0.352257] pci 0000:00:1f.3: reg 0x10: [mem 0xdf306000-0xdf3060ff 64bit]
[    0.352282] pci 0000:00:1f.3: reg 0x20: [io  0xa000-0xa01f]
[    0.352384] pci 0000:00:1f.6: [8086:2932] type 00 class 0x118000
[    0.352410] pci 0000:00:1f.6: reg 0x10: [mem 0xdf304000-0xdf304fff 64bit]
[    0.352651] pci 0000:01:00.0: [10de:0649] type 00 class 0x030000
[    0.352690] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[    0.352715] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.352741] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
[    0.352759] pci 0000:01:00.0: reg 0x24: [io  0x9000-0x907f]
[    0.352785] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[    0.360026] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.360029] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.360032] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd2ffffff]
[    0.360036] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.360131] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000
[    0.360171] pci 0000:02:00.0: reg 0x10: [mem 0xde200000-0xde201fff 64bit]
[    0.360355] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.368020] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.368025] pci 0000:00:1c.0:   bridge window [io  0x8000-0x8fff]
[    0.368029] pci 0000:00:1c.0:   bridge window [mem 0xde200000-0xdf2fffff]
[    0.368035] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.368131] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
[    0.368153] pci 0000:03:00.0: reg 0x10: [io  0x6000-0x60ff]
[    0.368184] pci 0000:03:00.0: reg 0x18: [mem 0xd4010000-0xd4010fff 64bit pref]
[    0.368205] pci 0000:03:00.0: reg 0x20: [mem 0xd4000000-0xd400ffff 64bit pref]
[    0.368218] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[    0.368308] pci 0000:03:00.0: supports D1 D2
[    0.368310] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.368372] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.376017] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.376021] pci 0000:00:1c.1:   bridge window [io  0x6000-0x7fff]
[    0.376026] pci 0000:00:1c.1:   bridge window [mem 0xdd200000-0xde1fffff]
[    0.376032] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd50fffff 64bit pref]
[    0.376100] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.376104] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.376108] pci 0000:00:1c.2:   bridge window [mem 0xdc200000-0xdd1fffff]
[    0.376115] pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.376178] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.376183] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.376187] pci 0000:00:1c.3:   bridge window [mem 0xdb200000-0xdc1fffff]
[    0.376193] pci 0000:00:1c.3:   bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.376343] pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010
[    0.376372] pci 0000:06:00.0: reg 0x10: [mem 0xda100000-0xda1007ff]
[    0.376390] pci 0000:06:00.0: reg 0x14: [mem 0xda100d00-0xda100d7f]
[    0.376440] pci 0000:06:00.0: reg 0x20: [mem 0xda100c80-0xda100cff]
[    0.376458] pci 0000:06:00.0: reg 0x24: [mem 0xda100c00-0xda100c7f]
[    0.376642] pci 0000:06:00.1: [197b:2382] type 00 class 0x088000
[    0.376667] pci 0000:06:00.1: reg 0x10: [mem 0xda100b00-0xda100bff]
[    0.376903] pci 0000:06:00.2: [197b:2381] type 00 class 0x080501
[    0.376928] pci 0000:06:00.2: reg 0x10: [mem 0xda100a00-0xda100aff]
[    0.377164] pci 0000:06:00.3: [197b:2383] type 00 class 0x088000
[    0.377189] pci 0000:06:00.3: reg 0x10: [mem 0xda100900-0xda1009ff]
[    0.377425] pci 0000:06:00.4: [197b:2384] type 00 class 0x088000
[    0.377450] pci 0000:06:00.4: reg 0x10: [mem 0xda100800-0xda1008ff]
[    0.384024] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.384028] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.384033] pci 0000:00:1c.4:   bridge window [mem 0xda100000-0xdb1fffff]
[    0.384039] pci 0000:00:1c.4:   bridge window [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.384146] acpiphp: Slot [1] registered
[    0.384152] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.384157] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.384161] pci 0000:00:1c.5:   bridge window [mem 0xd9100000-0xda0fffff]
[    0.384167] pci 0000:00:1c.5:   bridge window [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.384255] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[    0.384267] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.384269] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.384271] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.384273] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.384421] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384486] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384548] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384610] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384674] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384736] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[    0.384797] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[    0.384859] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[    0.385685] ACPI: Enabled 10 GPEs in block 00 to 3F
[    0.385736] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.385817] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.385817] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.385817] vgaarb: loaded
[    0.385817] vgaarb: bridge control possible 0000:01:00.0
[    0.385817] PCI: Using ACPI for IRQ routing
[    0.385840] PCI: pci_cache_line_size set to 64 bytes
[    0.385946] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.385948] e820: reserve RAM buffer [mem 0xbe626000-0xbfffffff]
[    0.385950] e820: reserve RAM buffer [mem 0xbfca8000-0xbfffffff]
[    0.385952] e820: reserve RAM buffer [mem 0xbfd86000-0xbfffffff]
[    0.385953] e820: reserve RAM buffer [mem 0xbfdea000-0xbfffffff]
[    0.385955] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[    0.386105] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.386111] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.386115] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.389017] amd_nb: Cannot enumerate AMD northbridges
[    0.389017] Switched to clocksource hpet
[    0.395709] pnp: PnP ACPI init
[    0.395725] ACPI: bus type PNP registered
[    0.395841] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.395845] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.396382] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.396386] system 00:01: [io  0x0600-0x060f] has been reserved
[    0.396388] system 00:01: [io  0x0610] has been reserved
[    0.396391] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.396393] system 00:01: [io  0x0810-0x0817] has been reserved
[    0.396395] system 00:01: [io  0x0820-0x0823] has been reserved
[    0.396398] system 00:01: [io  0x0400-0x047f] has been reserved
[    0.396400] system 00:01: [io  0x0500-0x053f] has been reserved
[    0.396402] system 00:01: [io  0x0380-0x0383] has been reserved
[    0.396405] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.396408] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.396410] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.396413] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.396415] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.396418] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.396420] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.396423] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.396425] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.396428] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.396431] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.396483] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.396569] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.396623] pnp 00:04: Plug and Play ACPI device, IDs SYN014f SYN0100 SYN0002 PNP0f13 (active)
[    0.396687] pnp 00:05: Plug and Play ACPI device, IDs ENE0100 (active)
[    0.396900] pnp: PnP ACPI: found 6 devices
[    0.396902] ACPI: bus type PNP unregistered
[    0.403849] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[    0.403852] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[    0.403916] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[    0.403919] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.403922] pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
[    0.403926] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xd2ffffff]
[    0.403929] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.403933] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.403936] pci 0000:00:1c.0:   bridge window [io  0x8000-0x8fff]
[    0.403941] pci 0000:00:1c.0:   bridge window [mem 0xde200000-0xdf2fffff]
[    0.403945] pci 0000:00:1c.0:   bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.403953] pci 0000:03:00.0: BAR 6: assigned [mem 0xdd200000-0xdd20ffff pref]
[    0.403955] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.403958] pci 0000:00:1c.1:   bridge window [io  0x6000-0x7fff]
[    0.403963] pci 0000:00:1c.1:   bridge window [mem 0xdd200000-0xde1fffff]
[    0.403967] pci 0000:00:1c.1:   bridge window [mem 0xd4000000-0xd50fffff 64bit pref]
[    0.403974] pci 0000:00:1c.2: PCI bridge to [bus 04]
[    0.403977] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[    0.403982] pci 0000:00:1c.2:   bridge window [mem 0xdc200000-0xdd1fffff]
[    0.403986] pci 0000:00:1c.2:   bridge window [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.403992] pci 0000:00:1c.3: PCI bridge to [bus 05]
[    0.403995] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[    0.404000] pci 0000:00:1c.3:   bridge window [mem 0xdb200000-0xdc1fffff]
[    0.404008] pci 0000:00:1c.3:   bridge window [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.404015] pci 0000:00:1c.4: PCI bridge to [bus 06]
[    0.404018] pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
[    0.404023] pci 0000:00:1c.4:   bridge window [mem 0xda100000-0xdb1fffff]
[    0.404027] pci 0000:00:1c.4:   bridge window [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.404034] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[    0.404037] pci 0000:00:1c.5:   bridge window [io  0x2000-0x2fff]
[    0.404042] pci 0000:00:1c.5:   bridge window [mem 0xd9100000-0xda0fffff]
[    0.404046] pci 0000:00:1c.5:   bridge window [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.404053] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[    0.404065] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.404067] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.404069] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.404071] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.404074] pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
[    0.404076] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[    0.404078] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.404080] pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
[    0.404082] pci_bus 0000:02: resource 1 [mem 0xde200000-0xdf2fffff]
[    0.404084] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[    0.404086] pci_bus 0000:03: resource 0 [io  0x6000-0x7fff]
[    0.404088] pci_bus 0000:03: resource 1 [mem 0xdd200000-0xde1fffff]
[    0.404090] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd50fffff 64bit pref]
[    0.404093] pci_bus 0000:04: resource 0 [io  0x5000-0x5fff]
[    0.404095] pci_bus 0000:04: resource 1 [mem 0xdc200000-0xdd1fffff]
[    0.404097] pci_bus 0000:04: resource 2 [mem 0xd5100000-0xd60fffff 64bit pref]
[    0.404099] pci_bus 0000:05: resource 0 [io  0x4000-0x4fff]
[    0.404101] pci_bus 0000:05: resource 1 [mem 0xdb200000-0xdc1fffff]
[    0.404103] pci_bus 0000:05: resource 2 [mem 0xd6100000-0xd70fffff 64bit pref]
[    0.404105] pci_bus 0000:06: resource 0 [io  0x3000-0x3fff]
[    0.404107] pci_bus 0000:06: resource 1 [mem 0xda100000-0xdb1fffff]
[    0.404109] pci_bus 0000:06: resource 2 [mem 0xd7100000-0xd80fffff 64bit pref]
[    0.404111] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.404113] pci_bus 0000:07: resource 1 [mem 0xd9100000-0xda0fffff]
[    0.404115] pci_bus 0000:07: resource 2 [mem 0xd8100000-0xd90fffff 64bit pref]
[    0.404117] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.404119] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.404121] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.404123] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.404171] NET: Registered protocol family 2
[    0.404442] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.404726] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.405109] TCP: Hash tables configured (established 65536 bind 65536)
[    0.405155] TCP: reno registered
[    0.405168] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.405225] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.405340] NET: Registered protocol family 1
[    0.407810] pci 0000:01:00.0: Video device with shadowed ROM
[    0.407843] PCI: CLS 64 bytes, default 64
[    0.407906] Unpacking initramfs...
[    0.717883] Freeing initrd memory: 14816K (ffff880036300000 - ffff880037178000)
[    0.717901] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.717904] software IO TLB [mem 0xba626000-0xbe626000] (64MB) mapped at [ffff8800ba626000-ffff8800be625fff]
[    0.717941] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.717942] Simple Boot Flag at 0x44 set to 0x1
[    0.718136] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60c
[    0.718142] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60c
[    0.718244] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.718608] audit: initializing netlink subsys (disabled)
[    0.718636] audit: type=2000 audit(1516604452.716:1): initialized
[    0.719015] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.719038] zbud: loaded
[    0.719212] VFS: Disk quotas dquot_6.5.2
[    0.719229] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.719293] msgmni has been set to 11961
[    0.719621] alg: No test for stdrng (krng)
[    0.719649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.719694] io scheduler noop registered
[    0.719697] io scheduler deadline registered
[    0.719734] io scheduler cfq registered (default)
[    0.720052] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    0.720271] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[    0.720509] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[    0.720601] pcieport 0000:00:1c.2: enabling device (0000 -> 0003)
[    0.720754] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[    0.720845] pcieport 0000:00:1c.3: enabling device (0000 -> 0003)
[    0.720994] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[    0.721231] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[    0.721468] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[    0.721598] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    0.721600] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    0.721603] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    0.721624] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[    0.721626] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[    0.721630] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[    0.721651] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[    0.721653] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    0.721657] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[    0.721678] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[    0.721682] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[    0.721703] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[    0.721707] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[    0.721728] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[    0.721731] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    0.721733] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[    0.721735] pci 0000:06:00.2: Signaling PME through PCIe PME interrupt
[    0.721737] pci 0000:06:00.3: Signaling PME through PCIe PME interrupt
[    0.721739] pci 0000:06:00.4: Signaling PME through PCIe PME interrupt
[    0.721743] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[    0.721765] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[    0.721769] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[    0.721790] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.721811] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.721837] intel_idle: does not run on family 6 model 23
[    0.721890] GHES: HEST is not enabled!
[    0.722020] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.722492] Linux agpgart interface v0.103
[    0.722715] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    0.746540] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.746546] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.746688] mousedev: PS/2 mouse device common for all mice
[    0.748406] rtc_cmos 00:02: RTC can wake from S4
[    0.748534] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.748560] rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.748575] ledtrig-cpu: registered to indicate activity on CPUs
[    0.748744] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[    0.748746] AMD IOMMUv2 functionality not available on this system
[    0.748837] TCP: cubic registered
[    0.748870] NET: Registered protocol family 10
[    0.749099] mip6: Mobile IPv6
[    0.749103] NET: Registered protocol family 17
[    0.749109] mpls_gso: MPLS GSO support
[    0.749382] registered taskstats version 1
[    0.750013] rtc_cmos 00:02: setting system clock to 2018-01-22 07:00:53 UTC (1516604453)
[    0.750104] PM: Hibernation image not present or could not be loaded.
[    0.751175] Freeing unused kernel memory: 1224K (ffffffff818f4000 - ffffffff81a26000)
[    0.751177] Write protecting the kernel read-only data: 8192k
[    0.751585] Freeing unused kernel memory: 840K (ffff88000152e000 - ffff880001600000)
[    0.752123] Freeing unused kernel memory: 212K (ffff8800017cb000 - ffff880001800000)
[    0.762738] systemd-udevd[61]: starting version 215
[    0.763119] random: systemd-udevd: uninitialized urandom read (16 bytes read, 2 bits of entropy available)
[    0.770132] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.777118] ACPI: bus type USB registered
[    0.777153] usbcore: registered new interface driver usbfs
[    0.777165] usbcore: registered new interface driver hub
[    0.782206] usbcore: registered new device driver usb
[    0.784147] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.784441] uhci_hcd: USB Universal Host Controller Interface driver
[    0.784684] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.784693] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.784702] uhci_hcd 0000:00:1a.0: detected 2 ports
[    0.784740] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a0e0
[    0.784804] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    0.784806] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.784808] usb usb1: Product: UHCI Host Controller
[    0.784810] usb usb1: Manufacturer: Linux 3.16.0-5-amd64 uhci_hcd
[    0.784812] usb usb1: SerialNumber: 0000:00:1a.0
[    0.784953] hub 1-0:1.0: USB hub found
[    0.784961] hub 1-0:1.0: 2 ports detected
[    0.785227] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.785233] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    0.785240] uhci_hcd 0000:00:1a.1: detected 2 ports
[    0.785269] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a0c0
[    0.785315] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.785318] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.785320] usb usb2: Product: UHCI Host Controller
[    0.785322] usb usb2: Manufacturer: Linux 3.16.0-5-amd64 uhci_hcd
[    0.785324] usb usb2: SerialNumber: 0000:00:1a.1
[    0.785442] hub 2-0:1.0: USB hub found
[    0.785449] hub 2-0:1.0: 2 ports detected
[    0.785469] ehci-pci: EHCI PCI platform driver
[    0.785700] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.785706] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    0.785713] uhci_hcd 0000:00:1d.0: detected 2 ports
[    0.785741] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a0a0
[    0.785790] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.785793] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.785795] usb usb3: Product: UHCI Host Controller
[    0.785797] usb usb3: Manufacturer: Linux 3.16.0-5-amd64 uhci_hcd
[    0.785799] usb usb3: SerialNumber: 0000:00:1d.0
[    0.785911] hub 3-0:1.0: USB hub found
[    0.785917] hub 3-0:1.0: 2 ports detected
[    0.786163] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.786169] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    0.786176] uhci_hcd 0000:00:1d.1: detected 2 ports
[    0.786206] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a080
[    0.786251] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.786253] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.786255] usb usb4: Product: UHCI Host Controller
[    0.786257] usb usb4: Manufacturer: Linux 3.16.0-5-amd64 uhci_hcd
[    0.786259] usb usb4: SerialNumber: 0000:00:1d.1
[    0.786369] hub 4-0:1.0: USB hub found
[    0.786377] hub 4-0:1.0: 2 ports detected
[    0.786620] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.786627] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    0.786634] uhci_hcd 0000:00:1d.2: detected 2 ports
[    0.786654] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000a060
[    0.786702] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.786704] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.786706] usb usb5: Product: UHCI Host Controller
[    0.786708] usb usb5: Manufacturer: Linux 3.16.0-5-amd64 uhci_hcd
[    0.786710] usb usb5: SerialNumber: 0000:00:1d.2
[    0.786821] hub 5-0:1.0: USB hub found
[    0.786828] hub 5-0:1.0: 2 ports detected
[    0.787072] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.787079] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 6
[    0.787085] uhci_hcd 0000:00:1d.3: detected 2 ports
[    0.787115] uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000a040
[    0.787163] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.787166] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.787168] usb usb6: Product: UHCI Host Controller
[    0.787169] usb usb6: Manufacturer: Linux 3.16.0-5-amd64 uhci_hcd
[    0.787171] usb usb6: SerialNumber: 0000:00:1d.3
[    0.787284] hub 6-0:1.0: USB hub found
[    0.787293] hub 6-0:1.0: 2 ports detected
[    0.787880] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.787887] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
[    0.787903] ehci-pci 0000:00:1a.7: debug port 1
[    0.791825] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[    0.792267] ehci-pci 0000:00:1a.7: irq 19, io mem 0xdf305c00
[    0.798835] [Firmware Bug]: Invalid critical threshold (0)
[    0.799665] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.799906] r8169 0000:03:00.0: irq 47 for MSI/MSI-X
[    0.800116] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffc90004c8a000, 00:23:8b:14:f3:54, XID 1c4000c0 IRQ 47
[    0.800119] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[    0.801960] sdhci: Secure Digital Host Controller Interface driver
[    0.801963] sdhci: Copyright(c) Pierre Ossman
[    0.802214] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[    0.802329] mmc0: no vqmmc regulator found
[    0.802330] mmc0: no vmmc regulator found
[    0.802758] thermal LNXTHERM:00: registered as thermal_zone0
[    0.802760] ACPI: Thermal Zone [TZ01] (33 C)
[    0.803194] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[    0.803211] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[    0.803293] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[    0.804029] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.804087] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    0.804090] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.804092] usb usb7: Product: EHCI Host Controller
[    0.804094] usb usb7: Manufacturer: Linux 3.16.0-5-amd64 ehci_hcd
[    0.804096] usb usb7: SerialNumber: 0000:00:1a.7
[    0.804239] hub 7-0:1.0: USB hub found
[    0.804248] hub 7-0:1.0: 4 ports detected
[    0.804649] SCSI subsystem initialized
[    0.806576] firewire_ohci 0000:06:00.0: overriding IsoXmitIntMask
[    0.806636] libata version 3.00 loaded.
[    0.828193] hub 1-0:1.0: USB hub found
[    0.828203] hub 1-0:1.0: 2 ports detected
[    0.852078] hub 2-0:1.0: USB hub found
[    0.852087] hub 2-0:1.0: 2 ports detected
[    0.852732] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.852740] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[    0.852754] ehci-pci 0000:00:1d.7: debug port 1
[    0.856670] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[    0.856677] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdf305800
[    0.868018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.868060] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    0.868063] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.868065] usb usb8: Product: EHCI Host Controller
[    0.868067] usb usb8: Manufacturer: Linux 3.16.0-5-amd64 ehci_hcd
[    0.868069] usb usb8: SerialNumber: 0000:00:1d.7
[    0.868077] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    0.868339] hub 8-0:1.0: USB hub found
[    0.868346] hub 8-0:1.0: 8 ports detected
[    0.892095] hub 3-0:1.0: USB hub found
[    0.892103] hub 3-0:1.0: 2 ports detected
[    0.916062] hub 4-0:1.0: USB hub found
[    0.916072] hub 4-0:1.0: 2 ports detected
[    0.940065] hub 5-0:1.0: USB hub found
[    0.940073] hub 5-0:1.0: 2 ports detected
[    0.964068] hub 6-0:1.0: USB hub found
[    0.964076] hub 6-0:1.0: 2 ports detected
[    0.964262] ahci 0000:00:1f.2: version 3.0
[    0.964424] ahci 0000:00:1f.2: BIOS update required for suspend/resume
[    0.964453] ahci 0000:00:1f.2: irq 48 for MSI/MSI-X
[    0.964523] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    0.964526] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc ems sxs
[    0.988753] scsi0 : ahci
[    0.988872] scsi1 : ahci
[    0.988969] scsi2 : ahci
[    0.989066] scsi3 : ahci
[    0.989162] scsi4 : ahci
[    0.989257] scsi5 : ahci
[    0.989317] ata1: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305100 irq 48
[    0.989320] ata2: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305180 irq 48
[    0.989321] ata3: DUMMY
[    0.989322] ata4: DUMMY
[    0.989325] ata5: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305300 irq 48
[    0.989327] ata6: SATA max UDMA/133 abar m2048@0xdf305000 port 0xdf305380 irq 48
[    0.989524] ACPI Warning: SystemIO range 0x000000000000A000-0x000000000000A01F conflicts with OpRegion 0x000000000000A000-0x000000000000A00F (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-254)
[    0.989530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.180014] usb 8-4: new high-speed USB device number 2 using ehci-pci
[    1.308033] ata6: SATA link down (SStatus 0 SControl 300)
[    1.308051] ata5: SATA link down (SStatus 0 SControl 300)
[    1.330719] usb 8-4: New USB device found, idVendor=0408, idProduct=03ba
[    1.330722] usb 8-4: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    1.330724] usb 8-4: Product: HP Webcam
[    1.330726] usb 8-4: Manufacturer: QCM
[    1.330728] usb 8-4: SerialNumber: SN0001
[    1.368083] firewire_core 0000:06:00.0: created device fw0: GUID 00241b0080864201, S400
[    1.480018] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.480035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.482171] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.83, max UDMA/100
[    1.484159] ata1.00: ATA-10: INTEL SSDSC2BW120H6, RG21, max UDMA/133
[    1.484161] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.484405] ata2.00: configured for UDMA/100
[    1.497467] ata1.00: configured for UDMA/133
[    1.497579] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BW12 RG21 PQ: 0 ANSI: 5
[    1.498654] scsi 1:0:0:0: CD-ROM            Optiarc  BD ROM BC-5500S  1.83 PQ: 0 ANSI: 5
[    1.508994] sr0: scsi3-mmc drive: 16x/16x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.508997] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.509136] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.509584] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    1.509622] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.524543] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    1.524611] sd 0:0:0:0: [sda] Write Protect is off
[    1.524614] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.524636] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.525337]  sda: sda1 sda2 < sda5 >
[    1.525776] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.573310] PM: Starting manual resume from disk
[    1.573316] PM: Hibernation image partition 8:5 present
[    1.573317] PM: Looking for hibernation image.
[    1.573488] PM: Image not found (code -22)
[    1.573490] PM: Hibernation image not present or could not be loaded.
[    1.622637] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    1.691142] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[    1.692454] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[    1.692605] systemd[1]: Detected architecture 'x86-64'.
[    1.704445] systemd[1]: Inserted module 'autofs4'
[    1.705003] systemd[1]: Set hostname to <TassosPc>.
[    1.716023] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[    1.718966] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[    1.742003] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[    1.742222] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[    1.742366] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[    1.746588] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[    1.746680] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[    1.746704] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[    1.749996] random: systemd: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[    1.784812] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    1.784884] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.784898] systemd[1]: Starting Remote File Systems (Pre).
[    1.784931] systemd[1]: Reached target Remote File Systems (Pre).
[    1.784952] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    1.784994] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.785005] systemd[1]: Starting Encrypted Volumes.
[    1.785018] systemd[1]: Reached target Encrypted Volumes.
[    1.785043] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    1.785140] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.785157] systemd[1]: Expecting device dev-disk-by\x2duuid-33178073\x2d182b\x2d47c2\x2d862b\x2d20d1cd692de1.device...
[    1.785170] systemd[1]: Starting Root Slice.
[    1.785206] systemd[1]: Created slice Root Slice.
[    1.785218] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    1.785261] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.785273] systemd[1]: Starting Delayed Shutdown Socket.
[    1.785306] systemd[1]: Listening on Delayed Shutdown Socket.
[    1.785318] systemd[1]: Starting Journal Socket (/dev/log).
[    1.785356] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.785373] systemd[1]: Starting udev Control Socket.
[    1.785402] systemd[1]: Listening on udev Control Socket.
[    1.785418] systemd[1]: Starting udev Kernel Socket.
[    1.785443] systemd[1]: Listening on udev Kernel Socket.
[    1.785455] systemd[1]: Starting User and Session Slice.
[    1.785564] systemd[1]: Created slice User and Session Slice.
[    1.785579] systemd[1]: Starting Journal Socket.
[    1.785626] systemd[1]: Listening on Journal Socket.
[    1.785647] systemd[1]: Starting System Slice.
[    1.785732] systemd[1]: Created slice System Slice.
[    1.785761] systemd[1]: Starting Increase datagram queue length...
[    1.786308] systemd[1]: Starting Nameserver information manager...
[    1.786861] systemd[1]: Mounting Huge Pages File System...
[    1.788853] systemd[1]: Mounting POSIX Message Queue File System...
[    1.789523] systemd[1]: Mounting Debug File System...
[    1.790079] systemd[1]: Starting udev Coldplug all Devices...
[    1.790790] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.796772] systemd[1]: Started Set Up Additional Binary Formats.
[    1.798699] systemd[1]: Starting Load Kernel Modules...
[    1.799325] systemd[1]: Starting system-getty.slice.
[    1.799461] systemd[1]: Created slice system-getty.slice.
[    1.799499] systemd[1]: Started File System Check on Root Device.
[    1.799535] systemd[1]: Starting Slices.
[    1.799549] systemd[1]: Reached target Slices.
[    1.802147] systemd[1]: Mounted Debug File System.
[    1.802188] systemd[1]: Mounted POSIX Message Queue File System.
[    1.802214] systemd[1]: Mounted Huge Pages File System.
[    1.802663] systemd[1]: Started Increase datagram queue length.
[    1.809725] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    1.812322] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000/0x0, board id: 0, fw id: 428212
[    1.815350] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.816168] systemd[1]: Starting Syslog Socket.
[    1.816229] systemd[1]: Listening on Syslog Socket.
[    1.816298] systemd[1]: Starting Journal Service...
[    1.816926] systemd[1]: Started Journal Service.
[    1.832022] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[    1.838690] lp: driver loaded but no devices found
[    1.840896] ppdev: user-space parallel port driver
[    1.847386] fuse init (API version 7.23)
[    1.892519] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[    1.896064] systemd-udevd[202]: starting version 215
[    1.974736] Monitor-Mwait will be used to enter C-1 state
[    1.975127] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    1.975133] ACPI: Power Button [PWRB]
[    1.975195] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[    1.975235] Monitor-Mwait will be used to enter C-2 state
[    1.975240] Monitor-Mwait will be used to enter C-3 state
[    1.975244] tsc: Marking TSC unstable due to TSC halts in idle
[    1.975254] ACPI: acpi_idle registered with cpuidle
[    1.975471] ACPI: Lid Switch [LID0]
[    1.975528] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[    1.975531] ACPI: Sleep Button [SLPB]
[    1.975616] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    1.975618] ACPI: Power Button [PWRF]
[    1.978426] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.980821] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.982377] acpi device:07: registered as cooling_device2
[    1.982448] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input7
[    1.990146] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[    1.990149] ene_ir: PLL freq = 1406
[    1.990150] ene_ir: KB3926C detected
[    1.990162] ene_ir: Firmware regs: 00 00
[    1.990163] ene_ir: Hardware features:
[    1.990164] ene_ir: * Uses GPIO 40 for IR demodulated input
[    2.012101] usb 5-2: New USB device found, idVendor=03f0, idProduct=171d
[    2.012106] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.012108] usb 5-2: Product: HP Integrated Module
[    2.012110] usb 5-2: Manufacturer: Broadcom Corp
[    2.035877] cfg80211: Calling CRDA to update world regulatory domain
[    2.035937] [drm] Initialized drm 1.1.0 20060810
[    2.036884] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[    2.044487] ACPI: Battery Slot [BAT0] (battery present)
[    2.045120] ACPI: AC Adapter [ACAD] (on-line)
[    2.045263] hp_accel: hardware type HPDV5_I found
[    2.049182] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    2.049185] Copyright(c) 2003- 2014 Intel Corporation
[    2.049386] iwlwifi 0000:02:00.0: irq 50 for MSI/MSI-X
[    2.060040] Registered IR keymap rc-rc6-mce
[    2.060136] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input8
[    2.060179] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[    2.060262] lis3lv02d: 8 bits sensor found
[    2.066452] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-5000-5.ucode
[    2.066584] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[    2.071596] IR NEC protocol handler initialized
[    2.077309] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[    2.077313] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.077315] sound hdaudioC0D0:    hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[    2.077317] sound hdaudioC0D0:    mono: mono_out=0x0
[    2.077319] sound hdaudioC0D0:    dig-out=0x1e/0x0
[    2.077321] sound hdaudioC0D0:    inputs:
[    2.077323] sound hdaudioC0D0:      Dock Mic=0xe
[    2.077325] sound hdaudioC0D0:      Internal Mic=0x18
[    2.077328] sound hdaudioC0D0:      Mic=0xb
[    2.079031] IR RC5(x) protocol handler initialized
[    2.085478] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMBA) (20140424/utaddress-254)
[    2.085486] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.085490] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000050F (\GPIO) (20140424/utaddress-254)
[    2.085493] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    2.085519] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    2.093019] IR RC6 protocol handler initialized
[    2.093825] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    2.110271] IR JVC protocol handler initialized
[    2.116623] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    2.116627] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    2.116629] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    2.116632] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[    2.117236] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[    2.134284] IR Sony protocol handler initialized
[    2.147474] input: PC Speaker as /devices/platform/pcspkr/input/input10
[    2.151142] IR SANYO protocol handler initialized
[    2.162135] IR Sharp protocol handler initialized
[    2.164659] IR MCE Keyboard/mouse protocol handler initialized
[    2.165220] kvm: disabled by bios
[    2.170600] lirc_dev: IR Remote Control driver registered, major 250
[    2.170978] IR LIRC bridge handler initialized
[    2.172371] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input11
[    2.172500] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[    2.172520] ene_ir: driver has been successfully loaded
[    2.176027] systemd-journald[173]: Received request to flush runtime journal from PID 1
[    2.196884] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[    2.198042] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    2.198119] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    2.198194] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[    2.198267] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[    2.229167] iTCO_vendor_support: vendor-support=0
[    2.229928] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.229976] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[    2.230257] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.242323] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.245901] cfg80211: World regulatory domain updated:
[    2.245906] cfg80211:  DFS Master region: unset
[    2.245907] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    2.245910] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    2.245913] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    2.245914] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    2.245917] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    2.245919] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    2.245921] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    2.245923] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    2.245925] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    2.253420] Adding 4789244k swap on /dev/sda5.  Priority:-1 extents:1 across:4789244k SSFS
[    2.269108] media: Linux media interface: v0.10
[    2.272664] systemd-udevd[244]: renamed network interface wlan0 to wlan1
[    2.274237] Linux video capture interface: v2.00
[    2.276298] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input16
[    2.278001] wmi: Mapper loaded
[    2.283019] uvcvideo: Found UVC 1.00 device HP Webcam (0408:03ba)
[    2.286134] input: HP WMI hotkeys as /devices/virtual/input/input17
[    2.290152] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[    2.294238] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb8/8-4/8-4:1.0/input/input18
[    2.294334] usbcore: registered new interface driver uvcvideo
[    2.294336] USB Video Class driver (1.1.1)
[    2.310293] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x096480a1
[    2.310298] nouveau  [  DEVICE][0000:01:00.0] Chipset: G96 (NV96)
[    2.310299] nouveau  [  DEVICE][0000:01:00.0] Family : NV50
[    2.310334] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    2.347702] iwlwifi 0000:02:00.0: RF_KILL bit toggled to enable radio.
[    2.427709] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    2.427714] nouveau  [   VBIOS][0000:01:00.0] using image from PRAMIN
[    2.427827] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    2.427830] nouveau  [   VBIOS][0000:01:00.0] version 62.94.1a.00.19
[    2.448341] nouveau 0000:01:00.0: irq 51 for MSI/MSI-X
[    2.448373] nouveau  [     PMC][0000:01:00.0] MSI interrupts enabled
[    2.448434] nouveau  [     PFB][0000:01:00.0] RAM type: DDR2
[    2.448436] nouveau  [     PFB][0000:01:00.0] RAM size: 512 MiB
[    2.448438] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 2048 tags
[    2.454358] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 1050000uv
[    2.520725] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    2.520745] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[    2.520755] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    2.520783] nouveau  [     CLK][0000:01:00.0] 03: core 169 MHz shader 338 MHz memory 100 MHz
[    2.521086] nouveau  [     CLK][0000:01:00.0] 05: core 275 MHz shader 550 MHz memory 250 MHz
[    2.521091] nouveau  [     CLK][0000:01:00.0] 07: core 400 MHz shader 800 MHz memory 400 MHz
[    2.521094] nouveau  [     CLK][0000:01:00.0] 0f: core 500 MHz shader 1250 MHz memory 400 MHz
[    2.521179] nouveau  [     CLK][0000:01:00.0] --: core 275 MHz shader 550 MHz memory 249 MHz
[    2.521603] [TTM] Zone  kernel: Available graphics memory: 3063360 kiB
[    2.521605] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[    2.521607] [TTM] Initializing pool allocator
[    2.521613] [TTM] Initializing DMA pool allocator
[    2.521626] nouveau  [     DRM] VRAM: 512 MiB
[    2.521628] nouveau  [     DRM] GART: 1048576 MiB
[    2.521632] nouveau  [     DRM] TMDS table version 2.0
[    2.521633] nouveau  [     DRM] DCB version 4.0
[    2.521636] nouveau  [     DRM] DCB outp 00: 01000323 00010034
[    2.521638] nouveau  [     DRM] DCB outp 01: 02014300 00000028
[    2.521640] nouveau  [     DRM] DCB outp 02: 02021332 00020010
[    2.521642] nouveau  [     DRM] DCB conn 00: 00000340
[    2.521644] nouveau  [     DRM] DCB conn 01: 00001061
[    2.521646] nouveau  [     DRM] DCB conn 02: 00000147
[    2.521647] nouveau  [     DRM] DCB conn 03: 00002131
[    2.521649] nouveau  [     DRM] DCB conn 04: 00000400
[    2.521651] nouveau  [     DRM] DCB conn 05: 00000210
[    2.521652] nouveau  [     DRM] DCB conn 06: 00000211
[    2.521654] nouveau  [     DRM] DCB conn 07: 00000213
[    2.541074] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.541078] [drm] Driver supports precise vblank timestamp query.
[    2.556199] usb 5-2: USB disconnect, device number 2
[    2.559134] nouveau  [     DRM] MM: using CRYPT for buffer copies
[    2.697338] RPC: Registered named UNIX socket transport module.
[    2.697342] RPC: Registered udp transport module.
[    2.697343] RPC: Registered tcp transport module.
[    2.697345] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.701487] FS-Cache: Loaded
[    2.709494] FS-Cache: Netfs 'nfs' registered for caching
[    2.718214] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.960186] random: nonblocking pool is initialized
[    3.312026] usb 5-2: new full-speed USB device number 3 using uhci_hcd
[    3.497084] usb 5-2: New USB device found, idVendor=03f0, idProduct=171d
[    3.497089] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.497091] usb 5-2: Product: HP Integrated Module
[    3.497093] usb 5-2: Manufacturer: Broadcom Corp
[    3.580812] WARNING! power/level is deprecated; use power/control instead
[    3.705129] nouveau  [     DRM] allocated 1280x800 fb: 0x70000, bo ffff8800bf9d2400
[    3.705330] fbcon: nouveaufb (fb0) is primary device
[    3.750992] Bluetooth: Core ver 2.19
[    3.751030] NET: Registered protocol family 31
[    3.751031] Bluetooth: HCI device and connection manager initialized
[    3.751315] Bluetooth: HCI socket layer initialized
[    3.751318] Bluetooth: L2CAP socket layer initialized
[    3.751328] Bluetooth: SCO socket layer initialized
[    3.778199] usbcore: registered new interface driver btusb
[    4.027459] Console: switching to colour frame buffer device 160x50
[    4.029058] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    4.029060] nouveau 0000:01:00.0: registered panic notifier
[    4.048049] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[    4.185168] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.185171] Bluetooth: BNEP filters: protocol multicast
[    4.185180] Bluetooth: BNEP socket layer initialized
[    5.449331] r8169 0000:03:00.0 eth0: link down
[    5.449405] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    5.467666] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[    5.470768] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[    5.566905] iwlwifi 0000:02:00.0: L1 Disabled - LTR Disabled
[    5.569910] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[    5.595870] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[    8.781510] wlan1: authenticate with 10:0e:7e:0e:0c:03
[    8.786971] wlan1: send auth to 10:0e:7e:0e:0c:03 (try 1/3)
[    8.899416] wlan1: authenticated
[    8.900064] wlan1: associate with 10:0e:7e:0e:0c:03 (try 1/3)
[    8.913708] wlan1: RX AssocResp from 10:0e:7e:0e:0c:03 (capab=0x501 status=0 aid=1)
[    8.918082] wlan1: associated
[    8.918134] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[    8.918163] cfg80211: Calling CRDA for country: GR
[    8.922992] cfg80211: Regulatory domain changed to country: GR
[    8.922997] cfg80211:  DFS Master region: ETSI
[    8.922999] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    8.923001] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    8.923004] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    8.923006] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    8.923008] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[    8.923010] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   45.486747] Bluetooth: RFCOMM TTY layer initialized
[   45.486761] Bluetooth: RFCOMM socket layer initialized
[   45.486767] Bluetooth: RFCOMM ver 1.11
[   51.925140] [sched_delayed] 4CE: hpet increased min_delta_ns to 20115 nsec
[   76.885179] wlan1: authenticate with 10:0e:7e:0e:0c:02
[   76.888215] wlan1: send auth to 10:0e:7e:0e:0c:02 (try 1/3)
[   76.894773] wlan1: authenticated
[   76.894891] cfg80211: Calling CRDA to update world regulatory domain
[   76.895099] wlan1: waiting for beacon from 10:0e:7e:0e:0c:02
[   76.932296] cfg80211: World regulatory domain updated:
[   76.932300] cfg80211:  DFS Master region: unset
[   76.932302] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   76.932304] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   76.932307] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   76.932309] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   76.932311] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   76.932314] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   76.932316] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   76.932318] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   76.932320] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   76.988034] wlan1: associate with 10:0e:7e:0e:0c:02 (try 1/3)
[   77.002799] wlan1: RX AssocResp from 10:0e:7e:0e:0c:02 (capab=0x421 status=0 aid=2)
[   77.004039] wlan1: associated
[   77.004116] cfg80211: Calling CRDA for country: GR
[   77.019420] cfg80211: Regulatory domain changed to country: GR
[   77.019425] cfg80211:  DFS Master region: ETSI
[   77.019427] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   77.019429] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   77.019432] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   77.019434] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   77.019436] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[   77.019438] cfg80211:   (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)


Ευχαριστώ. :)
Spoiler: show
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 12.04 precise 3.2.0-50-generic 64bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.2.0-49-generic
3 Intel Core2 Quad CPU Q9400 2.66GHz ‖ RAM 3954 MiB ‖ ASRock G31M-S
4 nVidia G92 [GeForce 9800 GT] [10de:0614] {nvidia}
5 eth0: Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Tassos10
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 435
Εγγραφή: 29 Μαρ 2010, 10:43
Εκτύπωση

Re: Μετά από αναβάθμιση ενημερώσεων ο υπολογιστής μου δεν άν

Δημοσίευσηαπό the_eye » 22 Ιαν 2018, 18:00

Tassos10 έγραψε:Όλα αυτά τα logs είναι μονάχα της τελευταίας εκκίνησης ;

Ναι, είναι η καταγραφή της εκκίνησης και λειτουργίας του συστήματος.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα στο GNU/Linux.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 16.04 xenial 4.15.0-24-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11280
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Λειτουργικό Σύστημα

cron