μπλεξιμο με κατατμηση σκληρου δισκου

...εγκαταστάσεις, αναβαθμίσεις, διαχείριση partitions, boot-loader, κλπ

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Στην ενότητα αυτή γράφουμε θέματα/ προβλήματα μόνο για το UBUNTU ή τα παράγωγά του.

μπλεξιμο με κατατμηση σκληρου δισκου

Δημοσίευσηαπό soto » 09 Φεβ 2010, 19:45

Καλησπερα σε ολους τους φιλους , εχω ενα μικρο μπλεξιμο στην κατατμηαη του δισκου του παλιου μου pc ΡΙΙΙ που εχω περασει xubuntu 9.10.
Επειδη ματαια προσπαθω καιρο να το δικτυωσω με αλλα pc σε τοπικο δικτυο, αποφασισα να δοκιμασω τη λυση του minimal ubuntu , αλλα εκει κολησα γιατι φαινεται εχω κανει λαθος στα partitions του σκληρου (μολις 10GB !! ). Ετσι φαινεται οτι εκτος απο το 1ο primary εχω δημιουργησει ενα 2ο extended που εχει χωριστει σε logical και swap κατατμησεις .Παραθετω τις εντολες γαι να γινει κατανοητο :

Κώδικας: Επιλογή όλων
sudo fdisk -l

Disk /dev/sda: 10.2 GB, 10242892800 bytes
255 heads, 63 sectors/track, 1245 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000b9628

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1         596     4787338+  f0  Linux/PA-RISC boot
/dev/sda2             597        1245     5213092+   f  W95 Ext'd (LBA)
/dev/sda5            1202        1245      353398+  f0  Linux/PA-RISC boot
/dev/sda6             597         842     1975932   83  Linux
/dev/sda7            1169        1201      265041   82  Linux swap / Solaris
/dev/sda8   *         843        1146     2441848+  83  Linux
/dev/sda9            1147        1168      176683+  82  Linux swap / Solaris

Partition table entries are not in disk order


Κώδικας: Επιλογή όλων
sudo parted -l /dev/sda
Model: ATA ST310212A (scsi)
Disk /dev/sda: 10,2GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos

Number  Start   End     Size    Type      File system     Flags
1      32,3kB  4902MB  4902MB  primary   ext3            palo
2      4902MB  10,2GB  5338MB  extended                  lba
6      4902MB  6926MB  2023MB  logical   ext3
8      6926MB  9426MB  2500MB  logical   ext4            boot
9      9426MB  9607MB  181MB   logical   linux-swap(v1)
7      9607MB  9879MB  271MB   logical   linux-swap(v1)
5      9879MB  10,2GB  362MB   logical   linux-swap(v1)  palo


Κώδικας: Επιλογή όλων
ls /dev/disk/by-uuid/ -alh
σύνολο 0
drwxr-xr-x 2 root root 160 2010-02-09 16:09 .
drwxr-xr-x 5 root root 100 2010-02-09 16:09 ..
lrwxrwxrwx 1 root root  10 2010-02-09 16:09 1cccc159-ffe9-4c2d-9a18-178c1334b485 -> ../../sda1
lrwxrwxrwx 1 root root  10 2010-02-09 16:09 31f89784-6b32-48bc-9c86-b5631e3f4f5a -> ../../sda7
lrwxrwxrwx 1 root root  10 2010-02-09 16:09 3ab0f281-9b0c-4b11-b851-6b0ad186baf3 -> ../../sda5
lrwxrwxrwx 1 root root  10 2010-02-09 16:09 8d46c704-bd45-4213-bf83-2cbcd2375f49 -> ../../sda6
lrwxrwxrwx 1 root root  10 2010-02-09 16:09 ad63a75f-9225-4561-8fe5-4b920ab600e6 -> ../../sda9
lrwxrwxrwx 1 root root  10 2010-02-09 16:09 ff279b01-bb88-4ce1-9936-64db11b70ce6 -> ../../sda8


Γραφικα μπορω να δω μονο το sda1 (με το Thynar) Tα αλλα partitions μονο αν τα κανω mounted καπου (πχ στο /media)
Αυτη τη στιγμη εκκινηση γινεται βασει του menu.lst που υπαρχει στο sda6 μονο απο Xubuntu. Οσο και αν προσπαθησα δεν μπορει να χρησιμοποιησει τα αλλα kernels στο μενου ωστε να εκκινησω το Ubuntu minimal. Επισης , αν αυτο λεει κατι, στο μενου εκκινησης υπαρχει εντολη
    root (hd0,5)
αν ορισω αλλο root δεν εκκινει.
Αυτο που θελω ειναι να απλοποιηθει λιγο το πραγμα σε 1 η 2 το πολυ κατατμησεις και πως θα μπορεσω να εξαλειψω την logical ? ευχαριστω.
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 12.04 σε Dell 1525 , Ubuntu 9.04 σε HP Compaq Mini 110c(μαθ) , Ubuntu 12.04 σε P4
Προδιαγραφές
⇛ DuoT5750│ 2 GB │Intel Mob. GM965/GL960 │ Broadcom BCM4312 │ │Intel 82801G │ TFT 15.4"
⇛ N270 │ 1 GB │ Intel Mobile 945GME │ Broadcom BCM4312 │ │Intel 82801G │ TFT 10.1"
⇛ P4 3.00 | 1 GB | ATI RV370 |RTL-8139 |Intel 82801FB
soto
babeTUX
babeTUX
 
Δημοσιεύσεις: 86
Εγγραφή: 17 Νοέμ 2009, 00:34
IRC: sotos313
Εκτύπωση

Re: μπλεξιμο με κατατμηση σκληρου δισκου

Δημοσίευσηαπό vagrale13 » 09 Φεβ 2010, 20:07

Αυτα τα partition ει ειναι? :?
Κώδικας: Επιλογή όλων
   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1         596     4787338+  f0  Linux/PA-RISC boot
/dev/sda2             597        1245     5213092+   f  W95 Ext'd (LBA)
/dev/sda5            1202        1245      353398+  f0  Linux/PA-RISC boot
/dev/sda6             597         842     1975932   83  Linux
/dev/sda7            1169        1201      265041   82  Linux swap / Solaris
/dev/sda8   *         843        1146     2441848+  83  Linux
/dev/sda9            1147        1168      176683+  82  Linux swap / Solaris

Με βαση αυτα που λες, δηλαδη να εχεις Ubuntu και Xubuntu, θα επρεπε να ειχες τα partition
Τρια πρωτεύοντα partition
α) / Ubuntu
β) /home
γ) / Xubuntu
και λογικα partition
δ) linux-swap
ε) υπολοιπος χωρος για αρχεια,backup,κλπ.

Τωρα επειδη δεν καταλαβα, μπορεις να μπεις μονο απο το Xubuntu, και δεν μπορεις απο το Ubuntu,
ή το αντιστροφο?
και ποιες εκδοσεις, ubuntu,xubuntu εχεις εγκατεστημενες! :think:
Desktop 1: Mint 13 Maya i386 / Ubuntu 14.10 Utopic Unicorn i386 (development branch)
CPU: AMD ATHLON II X2 215 │ RAM: 4026Mb │ Graphics Card: GeForce 210 512MB │ LG W2243S : 1920 x 1080
Desktop 2: Ubuntu 12.04 LTS Precise Pangoli i386
AMD Athlon 64 X2 5800+ │ 1024Mb │ nForce 7600 256MB (onboard) | 1024 x 768
Laptop : Sony Vaio VGN-N11m : Ubuntu 14.04Lts Trusty Tahr i386 (Mate desktop)


*Οδηγοί - How to - Tutorials σε Κατηγορίες
*Oδηγίες προς νεοεισερχόμενους σε forum ή linux
Άβαταρ μέλους
vagrale13
Freedom
Freedom
 
Δημοσιεύσεις: 7107
Εγγραφή: 04 Απρ 2009, 19:29
Τοποθεσία: κάπου εδώ μέσα στο net :P
Launchpad: vagrale
IRC: vagrale13
Εκτύπωση

Re: μπλεξιμο με κατατμηση σκληρου δισκου

Δημοσίευσηαπό soto » 09 Φεβ 2010, 23:39

Αυτο ειναι το μπλεξιμο , δεν μπορω να καταλαβω πως δημιουργησα 2ο partition που ειναι extended .
Μπαινω με xubuntu και δεν μπορω με ubuntu .Eπισης δεν μπορω να αποκτησω προσβαση στο extended sda2 - ολες οι κατατμησεις ειναι logical του sda2. Εγιναν καθως προσπαθησα να κανω partition για εγκατασταση του ubuntu minimal.
Εχω xubuntu 9.10 και ubuntu minimal 9.10 (τουλαχιστο προσπαθησα να εγκαταστησω αλλα δεν ανοιξε)
Στο menu.lst που βρισκω στο 1ο partition (sda1) φαινεται το kernel της εγκαταστασης ubuntu.
Αλλα για να εκκινησω χρησιμοποιει το menu.lst που βρισκεται στο sda6 (logical μεσα στο sda2).
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 12.04 σε Dell 1525 , Ubuntu 9.04 σε HP Compaq Mini 110c(μαθ) , Ubuntu 12.04 σε P4
Προδιαγραφές
⇛ DuoT5750│ 2 GB │Intel Mob. GM965/GL960 │ Broadcom BCM4312 │ │Intel 82801G │ TFT 15.4"
⇛ N270 │ 1 GB │ Intel Mobile 945GME │ Broadcom BCM4312 │ │Intel 82801G │ TFT 10.1"
⇛ P4 3.00 | 1 GB | ATI RV370 |RTL-8139 |Intel 82801FB
soto
babeTUX
babeTUX
 
Δημοσιεύσεις: 86
Εγγραφή: 17 Νοέμ 2009, 00:34
IRC: sotos313
Εκτύπωση

Re: μπλεξιμο με κατατμηση σκληρου δισκου

Δημοσίευσηαπό soto » 10 Φεβ 2010, 12:21

Παραθετω και το fstab :

Κώδικας: Επιλογή όλων
sudo cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda1 during installation
UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 /               ext3    relatime,errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=3ab0f281-9b0c-4b11-b851-6b0ad186baf3 none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/scd1       /media/cdrom1   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 12.04 σε Dell 1525 , Ubuntu 9.04 σε HP Compaq Mini 110c(μαθ) , Ubuntu 12.04 σε P4
Προδιαγραφές
⇛ DuoT5750│ 2 GB │Intel Mob. GM965/GL960 │ Broadcom BCM4312 │ │Intel 82801G │ TFT 15.4"
⇛ N270 │ 1 GB │ Intel Mobile 945GME │ Broadcom BCM4312 │ │Intel 82801G │ TFT 10.1"
⇛ P4 3.00 | 1 GB | ATI RV370 |RTL-8139 |Intel 82801FB
soto
babeTUX
babeTUX
 
Δημοσιεύσεις: 86
Εγγραφή: 17 Νοέμ 2009, 00:34
IRC: sotos313
Εκτύπωση

Re: μπλεξιμο με κατατμηση σκληρου δισκου

Δημοσίευσηαπό vagrale13 » 10 Φεβ 2010, 15:51

Κανε αυτο εδω viewtopic.php?f=9&t=9002
και δωσε το περιεχομενο του αρχειου RESULTS.txt
Desktop 1: Mint 13 Maya i386 / Ubuntu 14.10 Utopic Unicorn i386 (development branch)
CPU: AMD ATHLON II X2 215 │ RAM: 4026Mb │ Graphics Card: GeForce 210 512MB │ LG W2243S : 1920 x 1080
Desktop 2: Ubuntu 12.04 LTS Precise Pangoli i386
AMD Athlon 64 X2 5800+ │ 1024Mb │ nForce 7600 256MB (onboard) | 1024 x 768
Laptop : Sony Vaio VGN-N11m : Ubuntu 14.04Lts Trusty Tahr i386 (Mate desktop)


*Οδηγοί - How to - Tutorials σε Κατηγορίες
*Oδηγίες προς νεοεισερχόμενους σε forum ή linux
Άβαταρ μέλους
vagrale13
Freedom
Freedom
 
Δημοσιεύσεις: 7107
Εγγραφή: 04 Απρ 2009, 19:29
Τοποθεσία: κάπου εδώ μέσα στο net :P
Launchpad: vagrale
IRC: vagrale13
Εκτύπωση

Re: μπλεξιμο με κατατμηση σκληρου δισκου

Δημοσίευσηαπό soto » 10 Φεβ 2010, 18:33

ok ευχαριστω ελπιζω να το στελνω σωστα:
RESULTS.txt
Κώδικας: Επιλογή όλων
============================= Boot Info Summary: ==============================

=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
    in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sda2: _________________________________________________________________________

    File system:       Extended Partition
    Boot sector type:  -
    Boot sector info: 

sda5: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda6: _________________________________________________________________________

    File system:       ext3
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 9.04
    Boot files/dirs:   /boot/grub/menu.lst /etc/fstab

sda7: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

sda8: _________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 9.10
    Boot files/dirs:   /etc/fstab

sda9: _________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ _____________________________________________________

Disk /dev/sda: 10.2 GB, 10242892800 bytes
255 heads, 63 sectors/track, 1245 cylinders, total 20005650 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000b9628

Partition  Boot         Start           End          Size  Id System

/dev/sda1                  63     9,574,739     9,574,677  f0 Linux/PA-RISC boot
/dev/sda2           9,574,740    20,000,924    10,426,185   f W95 Ext d (LBA)
/dev/sda5          19,294,128    20,000,924       706,797  f0 Linux/PA-RISC boot
/dev/sda6           9,574,866    13,526,729     3,951,864  83 Linux
/dev/sda7          18,763,983    19,294,064       530,082  82 Linux swap / Solaris
/dev/sda8    *     13,526,793    18,410,489     4,883,697  83 Linux
/dev/sda9          18,410,553    18,763,919       353,367  82 Linux swap / Solaris


blkid -c /dev/null: ____________________________________________________________

Device           UUID                                   TYPE       LABEL                         

/dev/sda1        1cccc159-ffe9-4c2d-9a18-178c1334b485   ext3                                     
/dev/sda5        3ab0f281-9b0c-4b11-b851-6b0ad186baf3   swap                                     
/dev/sda6        8d46c704-bd45-4213-bf83-2cbcd2375f49   ext3                                     
/dev/sda7        31f89784-6b32-48bc-9c86-b5631e3f4f5a   swap                                     
/dev/sda8        ff279b01-bb88-4ce1-9936-64db11b70ce6   ext4                                     
/dev/sda9        ad63a75f-9225-4561-8fe5-4b920ab600e6   swap                                     

============================ "mount | grep ^/dev  output: ===========================

Device           Mount_Point              Type       Options

/dev/sda1        /                        ext3       (rw,relatime,errors=remount-ro)


=========================== sda1/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=1cccc159-ffe9-4c2d-9a18-178c1334b485

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title      Ubuntu 9.10, kernel 2.6.31-17-generic
uuid      1cccc159-ffe9-4c2d-9a18-178c1334b485
kernel      /boot/vmlinuz-2.6.31-17-generic root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro quiet splash
initrd      /boot/initrd.img-2.6.31-17-generic
quiet

title      Ubuntu 9.10, kernel 2.6.31-17-generic (recovery mode)
uuid      1cccc159-ffe9-4c2d-9a18-178c1334b485
kernel      /boot/vmlinuz-2.6.31-17-generic root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro  single
initrd      /boot/initrd.img-2.6.31-17-generic

title      Ubuntu 9.10, kernel 2.6.31-16-generic
uuid      1cccc159-ffe9-4c2d-9a18-178c1334b485
kernel      /boot/vmlinuz-2.6.31-16-generic root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro quiet splash
initrd      /boot/initrd.img-2.6.31-16-generic
quiet

title      Ubuntu 9.10, kernel 2.6.31-16-generic (recovery mode)
uuid      1cccc159-ffe9-4c2d-9a18-178c1334b485
kernel      /boot/vmlinuz-2.6.31-16-generic root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro  single
initrd      /boot/initrd.img-2.6.31-16-generic

title      Ubuntu 9.10, kernel 2.6.28-11-generic
uuid      1cccc159-ffe9-4c2d-9a18-178c1334b485
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro quiet splash
initrd      /boot/initrd.img-2.6.28-11-generic
quiet

title      Ubuntu 9.10, kernel 2.6.28-11-generic (recovery mode)
uuid      1cccc159-ffe9-4c2d-9a18-178c1334b485
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro  single
initrd      /boot/initrd.img-2.6.28-11-generic

title      Ubuntu 9.10, memtest86+
uuid      1cccc159-ffe9-4c2d-9a18-178c1334b485
kernel      /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda1 during installation
UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 /               ext3    relatime,errors=remount-ro 0       1
# swap was on /dev/sda5 during installation
UUID=3ab0f281-9b0c-4b11-b851-6b0ad186baf3 none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/scd1       /media/cdrom1   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0

=========================== sda6/boot/grub/menu.lst: ===========================

# menu.lst - See: grub(8), info grub, update-grub(8)
#            grub-install(8), grub-floppy(8),
#            grub-md5-crypt, /usr/share/doc/grub
#            and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default      0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout      10

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line)  and entries protected by the
# command 'lock'
# e.g. password topsecret
#      password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title      Windows 95/98/NT/2000
# root      (hd0,0)
# makeactive
# chainloader   +1
#
# title      Linux
# root      (hd0,1)
# kernel   /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
##      kopt_2_6_8=root=/dev/hdc1 ro
##      kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=8d46c704-bd45-4213-bf83-2cbcd2375f49 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=8d46c704-bd45-4213-bf83-2cbcd2375f49

## should update-grub create alternative automagic boot options
## e.g. alternative=true
##      alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
##      lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
##      lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
##      altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
##      howmany=7
# howmany=all

## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
##      indomU=true
##      indomU=false
# indomU=detect

## should update-grub create memtest86 boot option
## e.g. memtest86=true
##      memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

#title      Ubuntu 9.04, kernel 2.6.28-11-generic
#uuid      8d46c704-bd45-4213-bf83-2cbcd2375f49
#kernel      /boot/vmlinuz-2.6.28-11-generic
#root=UUID=8d46c704-bd45-4213-bf83-2cbcd2375f49 ro quiet splash
#initrd      /boot/initrd.img-2.6.28-11-generic
#quiet

#title      Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode)
#uuid      8d46c704-bd45-4213-bf83-2cbcd2375f49
#kernel      /boot/vmlinuz-2.6.28-11-generic
#root=UUID=8d46c704-bd45-4213-bf83-2cbcd2375f49 ro  single
#initrd      /boot/initrd.img-2.6.28-11-generic

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
#title      Other operating systems:
#root


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1)
root      (hd0,5)
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro quiet splash
initrd      /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1)
root      (hd0,5)
kernel      /boot/vmlinuz-2.6.28-11-generic root=UUID=1cccc159-ffe9-4c2d-9a18-178c1334b485 ro single
initrd      /boot/initrd.img-2.6.28-11-generic
savedefault
boot


# This entry automatically added by the Debian installer for an existing
# linux installation on /dev/sda1.
title      Ubuntu 9.04, memtest86+ (on /dev/sda1)
root      (hd0,0)
kernel      /boot/memtest86+.bin 
savedefault
boot


=============================== sda6/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda6 during installation
UUID=8d46c704-bd45-4213-bf83-2cbcd2375f49 /               ext3    relatime,errors=remount-ro 0       1
# swap was on /dev/sda7 during installation
UUID=31f89784-6b32-48bc-9c86-b5631e3f4f5a none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/scd1       /media/cdrom1   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0

=================== sda6: Location of files loaded by Grub: ===================


   4.9GB: boot/grub/menu.lst
   4.9GB: boot/grub/stage2
   4.9GB: boot/initrd.img-2.6.28-11-generic
   4.9GB: boot/vmlinuz-2.6.28-11-generic
   4.9GB: initrd.img
   4.9GB: vmlinuz

=============================== sda8/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
# / was on /dev/sda8 during installation
UUID=ff279b01-bb88-4ce1-9936-64db11b70ce6 /               ext4    errors=remount-ro 0       1
# swap was on /dev/sda9 during installation
UUID=ad63a75f-9225-4561-8fe5-4b920ab600e6 none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/scd1       /media/cdrom1   udf,iso9660 user,noauto,exec,utf8 0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto,exec,utf8 0       0

=================== sda8: Location of files loaded by Grub: ===================


   6.9GB: boot/initrd.img-2.6.31-17-generic
   6.9GB: boot/vmlinuz-2.6.31-17-generic
   6.9GB: initrd.img
   6.9GB: vmlinuz
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 12.04 σε Dell 1525 , Ubuntu 9.04 σε HP Compaq Mini 110c(μαθ) , Ubuntu 12.04 σε P4
Προδιαγραφές
⇛ DuoT5750│ 2 GB │Intel Mob. GM965/GL960 │ Broadcom BCM4312 │ │Intel 82801G │ TFT 15.4"
⇛ N270 │ 1 GB │ Intel Mobile 945GME │ Broadcom BCM4312 │ │Intel 82801G │ TFT 10.1"
⇛ P4 3.00 | 1 GB | ATI RV370 |RTL-8139 |Intel 82801FB
soto
babeTUX
babeTUX
 
Δημοσιεύσεις: 86
Εγγραφή: 17 Νοέμ 2009, 00:34
IRC: sotos313
Εκτύπωση

Re: μπλεξιμο με κατατμηση σκληρου δισκου

Δημοσίευσηαπό bobosT48 » 21 Δεκ 2017, 16:16

Έχω κι εγώ κάποια θέματα μετά από partition που έκανα στο 500ρι σκληρό μου
(τον χώρισα σε 2 μέρη ένα των 20Gb (λειτουργικο) και τα υπόλοιπα τα έβαλα για αποθήκη ταινίες , έγγραφα κλπ
1. αναγνωρίζει τα 477 gb σαν extrenal disk πια με unmount permission !!!
2.δεν μπορώ να μετανομάσω τον δίσκο σε κάτι άλλο εκτός sda3
3.αν διαγράψω κατά λάθος κάτι δεν μπορώ να το ανακτήσω γιατί λέει δεν μου έχει κάδο απορριμάτων {το ίδιο κι σε εξωτερικό σκληρό}
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Ικανοποιητικό
2 Ubuntu 17.10 artful 64bit (el_GR.UTF-8),
3 Intel Core2 CPU T5300 1.73GHz ‖ RAM 1987 MiB ‖ Sony Corporation VAIO - Sony Corporation VGN-N31M_W
4 Intel Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
5 wlp6s0: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01) ⋮ enp2s0: Marvell 88E8036 PCI-E Fast Ethernet Controller [11ab:4351] (rev 16)
bobosT48
babeTUX
babeTUX
 
Δημοσιεύσεις: 5
Εγγραφή: 21 Δεκ 2017, 14:50
Εκτύπωση


Επιστροφή στο Λειτουργικό Σύστημα