Emergency mode κατά την εκκίνηση

...εγκαταστάσεις, αναβαθμίσεις, διαχείριση partitions, boot-loader, κλπ

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Στην ενότητα αυτή γράφουμε θέματα/ προβλήματα μόνο για το UBUNTU ή τα παράγωγά του.

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό gmbous » 11 Απρ 2020, 20:23

Φαινεται και ο NVMe να μην εμφανιζει καποιο error:

Κώδικας: Επιλογή όλων
sudo smartctl -a /dev/nvme0
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.3.0-46-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       KBG30ZMS128G NVMe TOSHIBA 128GB
Serial Number:                      29JPA2TZPB8N
Firmware Version:                   ADDA0105
PCI Vendor/Subsystem ID:            0x1179
IEEE OUI Identifier:                0x00080d
Controller ID:                      0
Number of Namespaces:               1
Namespace 1 Size/Capacity:          128.035.676.160 [128 GB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Sat Apr 11 20:22:19 2020 EEST
Firmware Updates (0x12):            1 Slot, no Reset required
Optional Admin Commands (0x0017):   Security Format Frmw_DL *Other*
Optional NVM Commands (0x0017):     Comp Wr_Unc DS_Mngmt Sav/Sel_Feat
Maximum Data Transfer Size:         512 Pages
Warning  Comp. Temp. Threshold:     82 Celsius
Critical Comp. Temp. Threshold:     85 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
0 +     3.20W       -        -    0  0  0  0        0       0
1 +     2.70W       -        -    1  1  1  1        0       0
2 +     2.20W       -        -    2  2  2  2        0       0
3 -   0.0500W       -        -    3  3  3  3     8000   32000
4 -   0.0050W       -        -    4  4  4  4     8000   40000

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
0 -    4096       0         0
1 +     512       0         3

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning:                   0x00
Temperature:                        39 Celsius
Available Spare:                    100%
Available Spare Threshold:          50%
Percentage Used:                    3%
Data Units Read:                    2.219.677 [1,13 TB]
Data Units Written:                 3.201.921 [1,63 TB]
Host Read Commands:                 44.780.416
Host Write Commands:                111.807.139
Controller Busy Time:               447
Power Cycles:                       262
Power On Hours:                     677
Unsafe Shutdowns:                   70
Media and Data Integrity Errors:    0
Error Information Log Entries:      708
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0
Temperature Sensor 1:               39 Celsius

Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged

gmbous
babeTUX
babeTUX
 
Δημοσιεύσεις: 8
Εγγραφή: 09 Απρ 2020, 02:46
Εκτύπωση

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό the_eye » 11 Απρ 2020, 21:56

δώσε μας και το αποτέλεσμα της dmesg
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 5.3.0-53-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11579
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό gmbous » 12 Απρ 2020, 02:31

Η dmesg μου δινει:
Κώδικας: Επιλογή όλων
[    0.000000] microcode: microcode updated early to revision 0xca, date = 2019-10-03
[    0.000000] Linux version 5.3.0-46-generic (buildd@lcy01-amd64-013) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #38~18.04.1-Ubuntu SMP Tue Mar 31 04:17:56 UTC 2020 (Ubuntu 5.3.0-46.38~18.04.1-generic 5.3.18)
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.3.0-46-generic root=UUID=a71b0453-b219-4d58-b025-4065fca80edb ro recovery nomodeset
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai 
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040400000-0x0000000065ec1fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000065ec2000-0x0000000065ec2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000065ec3000-0x0000000065ec3fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000065ec4000-0x000000006ec08fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006ec09000-0x000000006f214fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006f215000-0x000000006f291fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000006f292000-0x000000006f758fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006f759000-0x000000006fffdfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006fffe000-0x000000006fffefff] usable
[    0.000000] BIOS-e820: [mem 0x000000006ffff000-0x0000000077ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078000000-0x00000000781fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000078200000-0x000000007e7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000047f7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x637de018-0x637ee057] usable ==> usable
[    0.000000] e820: update [mem 0x637de018-0x637ee057] usable ==> usable
[    0.000000] e820: update [mem 0x637b1018-0x637dd857] usable ==> usable
[    0.000000] e820: update [mem 0x637b1018-0x637dd857] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009dfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009e000-0x000000000009efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000003fffffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000040000000-0x00000000403fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000040400000-0x00000000637b1017] usable
[    0.000000] reserve setup_data: [mem 0x00000000637b1018-0x00000000637dd857] usable
[    0.000000] reserve setup_data: [mem 0x00000000637dd858-0x00000000637de017] usable
[    0.000000] reserve setup_data: [mem 0x00000000637de018-0x00000000637ee057] usable
[    0.000000] reserve setup_data: [mem 0x00000000637ee058-0x0000000065ec1fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000065ec2000-0x0000000065ec2fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000065ec3000-0x0000000065ec3fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000065ec4000-0x000000006ec08fff] usable
[    0.000000] reserve setup_data: [mem 0x000000006ec09000-0x000000006f214fff] reserved
[    0.000000] reserve setup_data: [mem 0x000000006f215000-0x000000006f291fff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000006f292000-0x000000006f758fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000006f759000-0x000000006fffdfff] reserved
[    0.000000] reserve setup_data: [mem 0x000000006fffe000-0x000000006fffefff] usable
[    0.000000] reserve setup_data: [mem 0x000000006ffff000-0x0000000077ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000078000000-0x00000000781fffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000078200000-0x000000007e7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000047f7fffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x6f22e000  ACPI=0x6f22e000  SMBIOS=0xf0000  SMBIOS 3.0=0xf0020  TPMFinalLog=0x6f6b8000  ESRT=0x6fc3c018  MEMATTR=0x6a7a4018  TPMEventLog=0x65fda018
[    0.000000] [Firmware Bug]: Failed to parse event in TPM Final Events Log
[    0.000000] secureboot: Secure boot enabled
[    0.000000] Kernel is locked down from EFI secure boot; see man kernel_lockdown.7
[    0.000000] SMBIOS 3.2.1 present.
[    0.000000] DMI: Dell Inc. Inspiron 5480/067MCT, BIOS 2.2.0 03/24/2019
[    0.000000] tsc: Detected 2000.000 MHz processor
[    0.000516] tsc: Detected 1999.968 MHz TSC
[    0.000516] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000517] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000522] last_pfn = 0x47f800 max_arch_pfn = 0x400000000
[    0.000525] MTRR default type: write-back
[    0.000526] MTRR fixed ranges enabled:
[    0.000527]   00000-9FFFF write-back
[    0.000527]   A0000-BFFFF uncachable
[    0.000528]   C0000-FFFFF write-protect
[    0.000528] MTRR variable ranges enabled:
[    0.000529]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000530]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000530]   2 base 007A000000 mask 7FFE000000 uncachable
[    0.000531]   3 base 00A0000000 mask 7FE0000000 uncachable
[    0.000531]   4 base 0090000000 mask 7FF0000000 uncachable
[    0.000532]   5 base 0080000000 mask 7FF0000000 write-combining
[    0.000532]   6 disabled
[    0.000532]   7 disabled
[    0.000533]   8 disabled
[    0.000533]   9 disabled
[    0.000872] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.002667] last_pfn = 0x78200 max_arch_pfn = 0x400000000
[    0.007784] esrt: Reserving ESRT space from 0x000000006fc3c018 to 0x000000006fc3c050.
[    0.007791] check: Scanning 1 areas for low memory corruption
[    0.007794] Using GB pages for direct mapping
[    0.007795] BRK [0x3c8a01000, 0x3c8a01fff] PGTABLE
[    0.007796] BRK [0x3c8a02000, 0x3c8a02fff] PGTABLE
[    0.007797] BRK [0x3c8a03000, 0x3c8a03fff] PGTABLE
[    0.007837] BRK [0x3c8a04000, 0x3c8a04fff] PGTABLE
[    0.007838] BRK [0x3c8a05000, 0x3c8a05fff] PGTABLE
[    0.007995] BRK [0x3c8a06000, 0x3c8a06fff] PGTABLE
[    0.008033] BRK [0x3c8a07000, 0x3c8a07fff] PGTABLE
[    0.008147] BRK [0x3c8a08000, 0x3c8a08fff] PGTABLE
[    0.008212] BRK [0x3c8a09000, 0x3c8a09fff] PGTABLE
[    0.008303] RAMDISK: [mem 0x24a59000-0x271e2fff]
[    0.008316] ACPI: Early table checksum verification disabled
[    0.008318] ACPI: RSDP 0x000000006F22E000 000024 (v02 DELL  )
[    0.008321] ACPI: XSDT 0x000000006F22E0C0 0000FC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.008325] ACPI: FACP 0x000000006F2701B8 000114 (v06 DELL   CBX3     01072009 AMI  00010013)
[    0.008328] ACPI: DSDT 0x000000006F22E248 041F6A (v02 DELL   CBX3     01072009 INTL 20160527)
[    0.008330] ACPI: FACS 0x000000006F757C00 000040
[    0.008331] ACPI: APIC 0x000000006F2702D0 0000BC (v04 DELL   CBX3     01072009 AMI  00010013)
[    0.008333] ACPI: FPDT 0x000000006F270390 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.008335] ACPI: FIDT 0x000000006F2703D8 00009C (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.008340] ACPI: MCFG 0x000000006F270478 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.008345] ACPI: SSDT 0x000000006F2704B8 001B1C (v02 CpuRef CpuSsdt  00003000 INTL 20160527)
[    0.008347] ACPI: BOOT 0x000000006F271FD8 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.008350] ACPI: SSDT 0x000000006F272000 0031C6 (v02 SaSsdt SaSsdt   00003000 INTL 20160527)
[    0.008357] ACPI: HPET 0x000000006F2751C8 000038 (v01 DELL\x CBX3     00000002      01000013)
[    0.008359] ACPI: SSDT 0x000000006F275200 004237 (v02 INTEL  xh_whld4 00000000 INTL 20160527)
[    0.008361] ACPI: NHLT 0x000000006F279438 00002D (v00 DELL\x CBX3     00000002      01000013)
[    0.008362] ACPI: UEFI 0x000000006F279468 000042 (v01 DELL\x CBX3     00000002      01000013)
[    0.008364] ACPI: LPIT 0x000000006F2794B0 000094 (v01 DELL\x CBX3     00000002      01000013)
[    0.008365] ACPI: SSDT 0x000000006F279548 000C2B (v02 DELL\x PtidDevc 00001000 INTL 20160527)
[    0.008367] ACPI: SSDT 0x000000006F27A178 0014E2 (v02 DELL\x TbtTypeC 00000000 INTL 20160527)
[    0.008369] ACPI: DBGP 0x000000006F27B660 000034 (v01 DELL\x CBX3     00000002      01000013)
[    0.008370] ACPI: DBG2 0x000000006F27B698 000054 (v00 DELL\x CBX3     00000002      01000013)
[    0.008372] ACPI: SSDT 0x000000006F27B6F0 0007DD (v02 DELL\x UsbCTabl 00001000 INTL 20160527)
[    0.008374] ACPI: SSDT 0x000000006F27BED0 0049C8 (v02 DptfTa DptfTabl 00001000 INTL 20160527)
[    0.008376] ACPI: MSDM 0x000000006F280898 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
[    0.008377] ACPI: SLIC 0x000000006F2808F0 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.008379] ACPI: DMAR 0x000000006F280A68 0000A8 (v01 INTEL  EDK2     00000002      01000013)
[    0.008381] ACPI: SSDT 0x000000006F280B10 000144 (v02 Intel  ADebTabl 00001000 INTL 20160527)
[    0.008382] ACPI: SSDT 0x000000006F280C58 0005B8 (v02 SgRef  SgRpSsdt 00001000 INTL 20160527)
[    0.008384] ACPI: BGRT 0x000000006F281210 000038 (v00                 01072009 AMI  00010013)
[    0.008386] ACPI: TPM2 0x000000006F281248 000034 (v04 DELL\x CBX3     00000001 AMI  00000000)
[    0.008387] ACPI: SSDT 0x000000006F281280 001FF3 (v01 OptRef OptTabl  00001000 INTL 20160527)
[    0.008394] ACPI: Local APIC address 0xfee00000
[    0.008641] No NUMA configuration found
[    0.008642] Faking a node at [mem 0x0000000000000000-0x000000047f7fffff]
[    0.008648] NODE_DATA(0) allocated [mem 0x47f7d5000-0x47f7fffff]
[    0.008820] Zone ranges:
[    0.008824]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.008825]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.008826]   Normal   [mem 0x0000000100000000-0x000000047f7fffff]
[    0.008827]   Device   empty
[    0.008827] Movable zone start for each node
[    0.008829] Early memory node ranges
[    0.008830]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.008831]   node   0: [mem 0x000000000009f000-0x000000000009ffff]
[    0.008831]   node   0: [mem 0x0000000000100000-0x000000003fffffff]
[    0.008832]   node   0: [mem 0x0000000040400000-0x0000000065ec1fff]
[    0.008832]   node   0: [mem 0x0000000065ec4000-0x000000006ec08fff]
[    0.008833]   node   0: [mem 0x000000006fffe000-0x000000006fffefff]
[    0.008833]   node   0: [mem 0x0000000078000000-0x00000000781fffff]
[    0.008834]   node   0: [mem 0x0000000100000000-0x000000047f7fffff]
[    0.009104] Zeroed struct page in unavailable ranges: 40538 pages
[    0.009105] Initmem setup node 0 [mem 0x0000000000001000-0x000000047f7fffff]
[    0.009106] On node 0 totalpages: 4120998
[    0.009107]   DMA zone: 64 pages used for memmap
[    0.009107]   DMA zone: 22 pages reserved
[    0.009108]   DMA zone: 3998 pages, LIFO batch:0
[    0.009146]   DMA32 zone: 7017 pages used for memmap
[    0.009146]   DMA32 zone: 449032 pages, LIFO batch:63
[    0.017417]   Normal zone: 57312 pages used for memmap
[    0.017418]   Normal zone: 3667968 pages, LIFO batch:63
[    0.066901] Reserving Intel graphics memory at [mem 0x7a800000-0x7e7fffff]
[    0.067204] ACPI: PM-Timer IO Port: 0x1808
[    0.067205] ACPI: Local APIC address 0xfee00000
[    0.067209] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.067210] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.067210] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.067211] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.067211] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.067212] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.067212] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.067213] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.067259] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.067260] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.067261] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.067262] ACPI: IRQ0 used by override.
[    0.067263] ACPI: IRQ9 used by override.
[    0.067264] Using ACPI (MADT) for SMP configuration information
[    0.067265] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.067269] e820: update [mem 0x6a58a000-0x6a60ffff] usable ==> reserved
[    0.067276] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.067291] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.067292] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.067294] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.067295] PM: Registered nosave memory: [mem 0x40000000-0x403fffff]
[    0.067296] PM: Registered nosave memory: [mem 0x637b1000-0x637b1fff]
[    0.067297] PM: Registered nosave memory: [mem 0x637dd000-0x637ddfff]
[    0.067298] PM: Registered nosave memory: [mem 0x637de000-0x637defff]
[    0.067299] PM: Registered nosave memory: [mem 0x637ee000-0x637eefff]
[    0.067300] PM: Registered nosave memory: [mem 0x65ec2000-0x65ec2fff]
[    0.067301] PM: Registered nosave memory: [mem 0x65ec3000-0x65ec3fff]
[    0.067302] PM: Registered nosave memory: [mem 0x6a58a000-0x6a60ffff]
[    0.067303] PM: Registered nosave memory: [mem 0x6ec09000-0x6f214fff]
[    0.067304] PM: Registered nosave memory: [mem 0x6f215000-0x6f291fff]
[    0.067304] PM: Registered nosave memory: [mem 0x6f292000-0x6f758fff]
[    0.067304] PM: Registered nosave memory: [mem 0x6f759000-0x6fffdfff]
[    0.067306] PM: Registered nosave memory: [mem 0x6ffff000-0x77ffffff]
[    0.067307] PM: Registered nosave memory: [mem 0x78200000-0x7e7fffff]
[    0.067307] PM: Registered nosave memory: [mem 0x7e800000-0xdfffffff]
[    0.067308] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.067308] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.067309] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.067309] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.067310] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.067310] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.067311] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.067311] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.067312] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.067313] [mem 0x7e800000-0xdfffffff] available for PCI devices
[    0.067314] Booting paravirtualized kernel on bare hardware
[    0.067317] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.067322] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.067619] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.067624] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.067625] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.067647] Built 1 zonelists, mobility grouping on.  Total pages: 4056583
[    0.067647] Policy zone: Normal
[    0.067648] Kernel command line: BOOT_IMAGE=/vmlinuz-5.3.0-46-generic root=UUID=a71b0453-b219-4d58-b025-4065fca80edb ro recovery nomodeset
[    0.067694] You have booted with nomodeset. This means your GPU drivers are DISABLED
[    0.067695] Any video related functionality will be severely degraded, and you may not even be able to suspend the system properly
[    0.067695] Unless you actually understand what nomodeset does, you should reboot without enabling it
[    0.069363] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.070216] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.070270] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.077326] Calgary: detecting Calgary via BIOS EBDA area
[    0.077328] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.138107] Memory: 16008504K/16483992K available (14339K kernel code, 2369K rwdata, 4664K rodata, 2660K init, 5076K bss, 475488K reserved, 0K cma-reserved)
[    0.138233] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.138249] ftrace: allocating 43282 entries in 170 pages
[    0.150061] rcu: Hierarchical RCU implementation.
[    0.150063] rcu:    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.150063]    Tasks RCU enabled.
[    0.150064] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.150065] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.152195] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[    0.152587] random: crng done (trusting CPU's manufacturer)
[    0.152615] Console: colour dummy device 80x25
[    0.152820] printk: console [tty0] enabled
[    0.152835] ACPI: Core revision 20190703
[    0.153235] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.153337] APIC: Switch to symmetric I/O mode setup
[    0.153340] DMAR: Host address width 39
[    0.153341] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.153346] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.153348] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.153351] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.153353] DMAR: RMRR base: 0x0000006f172000 end: 0x0000006f191fff
[    0.153354] DMAR: RMRR base: 0x0000007a000000 end: 0x0000007e7fffff
[    0.153356] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.153358] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.153359] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.155799] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.155801] x2apic enabled
[    0.155839] Switched APIC routing to cluster x2apic.
[    0.161514] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.181191] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39a8208cdd2, max_idle_ns: 881590748921 ns
[    0.181196] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.93 BogoMIPS (lpj=7999872)
[    0.181198] pid_max: default: 32768 minimum: 301
[    0.182935] LSM: Security Framework initializing
[    0.182944] Yama: becoming mindful.
[    0.182988] AppArmor: AppArmor initialized
[    0.183063] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.183115] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.183265] *** VALIDATE proc ***
[    0.183302] *** VALIDATE cgroup1 ***
[    0.183304] *** VALIDATE cgroup2 ***
[    0.183351] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.183366] process: using mwait in idle threads
[    0.183369] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.183370] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.183373] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.183375] Spectre V2 : Mitigation: Enhanced IBRS
[    0.183376] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.183378] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.183379] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.183558] Freeing SMP alternatives memory: 40K
[    0.185274] TSC deadline timer enabled
[    0.185279] smpboot: CPU0: Intel(R) Core(TM) i7-8565U CPU @ 1.80GHz (family: 0x6, model: 0x8e, stepping: 0xc)
[    0.185342] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.185348] ... version:                4
[    0.185349] ... bit width:              48
[    0.185350] ... generic registers:      4
[    0.185351] ... value mask:             0000ffffffffffff
[    0.185352] ... max period:             00007fffffffffff
[    0.185353] ... fixed-purpose events:   3
[    0.185354] ... event mask:             000000070000000f
[    0.185382] rcu: Hierarchical SRCU implementation.
[    0.186054] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.186108] smp: Bringing up secondary CPUs ...
[    0.186163] x86: Booting SMP configuration:
[    0.186164] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.189994] smp: Brought up 1 node, 8 CPUs
[    0.189994] smpboot: Max logical packages: 1
[    0.189994] smpboot: Total of 8 processors activated (31999.48 BogoMIPS)
[    0.193537] devtmpfs: initialized
[    0.193537] x86/mm: Memory block size: 128MB
[    0.194160] PM: Registering ACPI NVS region [mem 0x65ec2000-0x65ec2fff] (4096 bytes)
[    0.194160] PM: Registering ACPI NVS region [mem 0x6f292000-0x6f758fff] (5009408 bytes)
[    0.194160] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.194160] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.194160] pinctrl core: initialized pinctrl subsystem
[    0.194160] PM: RTC time: 09:55:08, date: 2020-04-11
[    0.194160] NET: Registered protocol family 16
[    0.194160] audit: initializing netlink subsys (disabled)
[    0.194160] audit: type=2000 audit(1586598908.036:1): state=initialized audit_enabled=0 res=1
[    0.194160] EISA bus registered
[    0.194160] cpuidle: using governor ladder
[    0.194160] cpuidle: using governor menu
[    0.194160] Simple Boot Flag at 0x47 set to 0x80
[    0.194160] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.194160] ACPI: bus type PCI registered
[    0.194160] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.194160] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.194160] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.194160] PCI: Using configuration type 1 for base access
[    0.194160] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.194160] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.194160] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.197247] fbcon: Taking over console
[    0.197264] ACPI: Added _OSI(Module Device)
[    0.197265] ACPI: Added _OSI(Processor Device)
[    0.197266] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.197267] ACPI: Added _OSI(Processor Aggregator Device)
[    0.197268] ACPI: Added _OSI(Linux-Dell-Video)
[    0.197270] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.197271] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.251529] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.257236] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.262916] ACPI: Dynamic OEM Table Load:
[    0.262921] ACPI: SSDT 0xFFFF93222CFE1800 0000F4 (v02 PmRef  Cpu0Psd  00003000 INTL 20160527)
[    0.263932] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
[    0.265282] ACPI: Dynamic OEM Table Load:
[    0.265287] ACPI: SSDT 0xFFFF93222D817000 000434 (v02 PmRef  Cpu0Cst  00003001 INTL 20160527)
[    0.266379] ACPI: Dynamic OEM Table Load:
[    0.266383] ACPI: SSDT 0xFFFF93222C40A000 00053F (v02 PmRef  Cpu0Ist  00003000 INTL 20160527)
[    0.267522] ACPI: Dynamic OEM Table Load:
[    0.267526] ACPI: SSDT 0xFFFF93222CFA5000 00011B (v02 PmRef  Cpu0Hwp  00003000 INTL 20160527)
[    0.268534] ACPI: Dynamic OEM Table Load:
[    0.268538] ACPI: SSDT 0xFFFF93222C408800 000724 (v02 PmRef  HwpLvt   00003000 INTL 20160527)
[    0.269775] ACPI: Dynamic OEM Table Load:
[    0.269779] ACPI: SSDT 0xFFFF93222C40B000 0005FC (v02 PmRef  ApIst    00003000 INTL 20160527)
[    0.270917] ACPI: Dynamic OEM Table Load:
[    0.270920] ACPI: SSDT 0xFFFF93222CBFD400 000317 (v02 PmRef  ApHwp    00003000 INTL 20160527)
[    0.272067] ACPI: Dynamic OEM Table Load:
[    0.272071] ACPI: SSDT 0xFFFF93222D95E000 000AB0 (v02 PmRef  ApPsd    00003000 INTL 20160527)
[    0.273642] ACPI: Dynamic OEM Table Load:
[    0.273646] ACPI: SSDT 0xFFFF93222CBFA000 00030A (v02 PmRef  ApCst    00003000 INTL 20160527)
[    0.277505] ACPI: EC: EC started
[    0.277506] ACPI: EC: interrupt blocked
[    0.283365] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.283367] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.283369] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[    0.283370] ACPI: Interpreter enabled
[    0.283400] ACPI: (supports S0 S3 S4 S5)
[    0.283402] ACPI: Using IOAPIC for interrupt routing
[    0.283429] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.284512] ACPI: Enabled 9 GPEs in block 00 to 7F
[    0.289351] ACPI: Power Resource [PC05] (on)
[    0.295742] ACPI: Power Resource [USBC] (on)
[    0.298186] ACPI: Power Resource [V0PR] (on)
[    0.298513] ACPI: Power Resource [V1PR] (on)
[    0.298835] ACPI: Power Resource [V2PR] (on)
[    0.303686] ACPI: Power Resource [WRST] (on)
[    0.319628] ACPI: Power Resource [PIN] (off)
[    0.319958] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.319963] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.322077] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.322079] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.322880] PCI host bridge to bus 0000:00
[    0.322883] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.322884] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.322886] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.322887] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.322889] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.322890] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.322891] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.322893] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.322894] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.322896] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.322897] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.322899] pci_bus 0000:00: root bus resource [mem 0x7e800000-0xdfffffff window]
[    0.322900] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
[    0.322902] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.322910] pci 0000:00:00.0: [8086:3e34] type 00 class 0x060000
[    0.323232] pci 0000:00:02.0: [8086:3ea0] type 00 class 0x030000
[    0.323241] pci 0000:00:02.0: reg 0x10: [mem 0xa4000000-0xa4ffffff 64bit]
[    0.323246] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.323250] pci 0000:00:02.0: reg 0x20: [io  0x5000-0x503f]
[    0.323262] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.323380] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.323391] pci 0000:00:04.0: reg 0x10: [mem 0xa5310000-0xa5317fff 64bit]
[    0.323545] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.323556] pci 0000:00:08.0: reg 0x10: [mem 0xa532c000-0xa532cfff 64bit]
[    0.323712] pci 0000:00:12.0: [8086:9df9] type 00 class 0x118000
[    0.323735] pci 0000:00:12.0: reg 0x10: [mem 0xa532b000-0xa532bfff 64bit]
[    0.323919] pci 0000:00:14.0: [8086:9ded] type 00 class 0x0c0330
[    0.323936] pci 0000:00:14.0: reg 0x10: [mem 0xa5300000-0xa530ffff 64bit]
[    0.323987] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.324314] pci 0000:00:14.2: [8086:9def] type 00 class 0x050000
[    0.324333] pci 0000:00:14.2: reg 0x10: [mem 0xa5322000-0xa5323fff 64bit]
[    0.324343] pci 0000:00:14.2: reg 0x18: [mem 0xa532a000-0xa532afff 64bit]
[    0.324489] pci 0000:00:14.3: [8086:9df0] type 00 class 0x028000
[    0.324524] pci 0000:00:14.3: reg 0x10: [mem 0xa531c000-0xa531ffff 64bit]
[    0.324618] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
[    0.324794] pci 0000:00:15.0: [8086:9de8] type 00 class 0x0c8000
[    0.324863] pci 0000:00:15.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.325195] pci 0000:00:15.1: [8086:9de9] type 00 class 0x0c8000
[    0.325268] pci 0000:00:15.1: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.325578] pci 0000:00:16.0: [8086:9de0] type 00 class 0x078000
[    0.325603] pci 0000:00:16.0: reg 0x10: [mem 0xa5327000-0xa5327fff 64bit]
[    0.325674] pci 0000:00:16.0: PME# supported from D3hot
[    0.325855] pci 0000:00:17.0: [8086:9dd3] type 00 class 0x010601
[    0.325871] pci 0000:00:17.0: reg 0x10: [mem 0xa5320000-0xa5321fff]
[    0.325878] pci 0000:00:17.0: reg 0x14: [mem 0xa5326000-0xa53260ff]
[    0.325885] pci 0000:00:17.0: reg 0x18: [io  0x5090-0x5097]
[    0.325892] pci 0000:00:17.0: reg 0x1c: [io  0x5080-0x5083]
[    0.325899] pci 0000:00:17.0: reg 0x20: [io  0x5060-0x507f]
[    0.325906] pci 0000:00:17.0: reg 0x24: [mem 0xa5325000-0xa53257ff]
[    0.325942] pci 0000:00:17.0: PME# supported from D3hot
[    0.326094] pci 0000:00:1c.0: [8086:9db8] type 01 class 0x060400
[    0.326163] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.326329] pci 0000:00:1c.4: [8086:9dbc] type 01 class 0x060400
[    0.326400] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.326415] pci 0000:00:1c.4: PTM enabled (root), 4ns granularity
[    0.326577] pci 0000:00:1d.0: [8086:9db0] type 01 class 0x060400
[    0.326648] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.326663] pci 0000:00:1d.0: PTM enabled (root), 4ns granularity
[    0.326824] pci 0000:00:1d.4: [8086:9db4] type 01 class 0x060400
[    0.326903] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.326921] pci 0000:00:1d.4: PTM enabled (root), 4ns granularity
[    0.327085] pci 0000:00:1f.0: [8086:9d84] type 00 class 0x060100
[    0.327277] pci 0000:00:1f.3: [8086:9dc8] type 00 class 0x040380
[    0.327317] pci 0000:00:1f.3: reg 0x10: [mem 0xa5318000-0xa531bfff 64bit]
[    0.327353] pci 0000:00:1f.3: reg 0x20: [mem 0xa5000000-0xa50fffff 64bit]
[    0.327429] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.327985] pci 0000:00:1f.4: [8086:9da3] type 00 class 0x0c0500
[    0.328011] pci 0000:00:1f.4: reg 0x10: [mem 0xa5324000-0xa53240ff 64bit]
[    0.328038] pci 0000:00:1f.4: reg 0x20: [io  0xefa0-0xefbf]
[    0.328183] pci 0000:00:1f.5: [8086:9da4] type 00 class 0x0c8000
[    0.328198] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
[    0.328394] acpiphp: Slot [1] registered
[    0.328402] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.328452] pci 0000:02:00.0: [10de:1d13] type 00 class 0x030200
[    0.328475] pci 0000:02:00.0: reg 0x10: [mem 0xa2000000-0xa2ffffff]
[    0.328486] pci 0000:02:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
[    0.328497] pci 0000:02:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
[    0.328504] pci 0000:02:00.0: reg 0x24: [io  0x4000-0x407f]
[    0.328511] pci 0000:02:00.0: reg 0x30: [mem 0xa3000000-0xa307ffff pref]
[    0.328526] pci 0000:02:00.0: Enabling HDA controller
[    0.328711] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.328714] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.328717] pci 0000:00:1c.4:   bridge window [mem 0x90000000-0xa30fffff]
[    0.328781] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000
[    0.328812] pci 0000:03:00.0: reg 0x10: [io  0x3000-0x30ff]
[    0.328836] pci 0000:03:00.0: reg 0x18: [mem 0xa5204000-0xa5204fff 64bit]
[    0.328852] pci 0000:03:00.0: reg 0x20: [mem 0xa5200000-0xa5203fff 64bit]
[    0.328946] pci 0000:03:00.0: supports D1 D2
[    0.328947] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.329067] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.329069] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.329072] pci 0000:00:1d.0:   bridge window [mem 0xa5200000-0xa52fffff]
[    0.329205] pci 0000:04:00.0: [1179:0113] type 00 class 0x010802
[    0.329233] pci 0000:04:00.0: reg 0x10: [mem 0xa5100000-0xa5103fff 64bit]
[    0.329341] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.329436] pci 0000:00:1d.4: PCI bridge to [bus 04]
[    0.329440] pci 0000:00:1d.4:   bridge window [mem 0xa5100000-0xa51fffff]
[    0.331098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.331164] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
[    0.331229] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.331293] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.331358] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.331422] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.331486] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.331552] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.343976] ACPI: EC: interrupt unblocked
[    0.343976] ACPI: EC: event unblocked
[    0.343976] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x6e, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.343976] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[    0.343978] SCSI subsystem initialized
[    0.343978] libata version 3.00 loaded.
[    0.343978] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.343978] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.343978] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.343978] vgaarb: loaded
[    0.343978] ACPI: bus type USB registered
[    0.343978] usbcore: registered new interface driver usbfs
[    0.343978] usbcore: registered new interface driver hub
[    0.343978] usbcore: registered new device driver usb
[    0.343978] pps_core: LinuxPPS API ver. 1 registered
[    0.343978] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.343978] PTP clock support registered
[    0.343978] EDAC MC: Ver: 3.0.0
[    0.343978] Registered efivars operations
[    0.343978] PCI: Using ACPI for IRQ routing
[    0.389453] PCI: pci_cache_line_size set to 64 bytes
[    0.389702] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[    0.389702] e820: reserve RAM buffer [mem 0x637b1018-0x63ffffff]
[    0.389703] e820: reserve RAM buffer [mem 0x637de018-0x63ffffff]
[    0.389703] e820: reserve RAM buffer [mem 0x65ec2000-0x67ffffff]
[    0.389704] e820: reserve RAM buffer [mem 0x6a58a000-0x6bffffff]
[    0.389704] e820: reserve RAM buffer [mem 0x6ec09000-0x6fffffff]
[    0.389705] e820: reserve RAM buffer [mem 0x6ffff000-0x6fffffff]
[    0.389705] e820: reserve RAM buffer [mem 0x78200000-0x7bffffff]
[    0.389706] e820: reserve RAM buffer [mem 0x47f800000-0x47fffffff]
[    0.389763] NetLabel: Initializing
[    0.389765] NetLabel:  domain hash size = 128
[    0.389766] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.389774] NetLabel:  unlabeled traffic allowed by default
[    0.393758] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.393762] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.395833] clocksource: Switched to clocksource tsc-early
[    0.400685] VFS: Disk quotas dquot_6.6.0
[    0.400700] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.400722] *** VALIDATE hugetlbfs ***
[    0.400772] AppArmor: AppArmor Filesystem Enabled
[    0.400796] pnp: PnP ACPI init
[    0.400903] system 00:00: [mem 0x40000000-0x403fffff] has been reserved
[    0.400907] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401065] system 00:01: [io  0x0680-0x069f] has been reserved
[    0.401067] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.401069] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401157] system 00:02: [io  0x1854-0x1857] has been reserved
[    0.401160] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.401292] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.401303] pnp 00:04: Plug and Play ACPI device, IDs DLL089c PNP0f13 (active)
[    0.401449] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.401451] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.401453] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.401454] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[    0.401457] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.401458] system 00:05: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.401460] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.401461] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.401464] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401633] system 00:06: [io  0x1800-0x18fe] could not be reserved
[    0.401635] system 00:06: [mem 0xfd000000-0xfd69ffff] has been reserved
[    0.401636] system 00:06: [mem 0xfd6b0000-0xfd6cffff] has been reserved
[    0.401638] system 00:06: [mem 0xfd6f0000-0xfdffffff] has been reserved
[    0.401639] system 00:06: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.401641] system 00:06: [mem 0xfe200000-0xfe7fffff] has been reserved
[    0.401642] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.401645] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.401869] system 00:07: [io  0x2000-0x20fe] has been reserved
[    0.401872] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.402689] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.406089] pnp: PnP ACPI: found 9 devices
[    0.406808] thermal_sys: Registered thermal governor 'fair_share'
[    0.406809] thermal_sys: Registered thermal governor 'bang_bang'
[    0.406810] thermal_sys: Registered thermal governor 'step_wise'
[    0.406811] thermal_sys: Registered thermal governor 'user_space'
[    0.406812] thermal_sys: Registered thermal governor 'power_allocator'
[    0.411298] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.411328] pci 0000:00:15.0: BAR 0: assigned [mem 0x7e800000-0x7e800fff 64bit]
[    0.411379] pci 0000:00:15.1: BAR 0: assigned [mem 0x7e801000-0x7e801fff 64bit]
[    0.411425] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.411435] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.411437] pci 0000:00:1c.4:   bridge window [io  0x4000-0x4fff]
[    0.411440] pci 0000:00:1c.4:   bridge window [mem 0x90000000-0xa30fffff]
[    0.411445] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.411447] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.411450] pci 0000:00:1d.0:   bridge window [mem 0xa5200000-0xa52fffff]
[    0.411455] pci 0000:00:1d.4: PCI bridge to [bus 04]
[    0.411458] pci 0000:00:1d.4:   bridge window [mem 0xa5100000-0xa51fffff]
[    0.411464] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.411465] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.411467] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.411468] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.411469] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.411471] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.411472] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.411473] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.411475] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.411476] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.411477] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.411479] pci_bus 0000:00: resource 15 [mem 0x7e800000-0xdfffffff window]
[    0.411480] pci_bus 0000:00: resource 16 [mem 0xfc800000-0xfe7fffff window]
[    0.411482] pci_bus 0000:02: resource 0 [io  0x4000-0x4fff]
[    0.411483] pci_bus 0000:02: resource 1 [mem 0x90000000-0xa30fffff]
[    0.411485] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.411486] pci_bus 0000:03: resource 1 [mem 0xa5200000-0xa52fffff]
[    0.411487] pci_bus 0000:04: resource 1 [mem 0xa5100000-0xa51fffff]
[    0.411613] NET: Registered protocol family 2
[    0.411713] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.411814] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.411992] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.412036] TCP: Hash tables configured (established 131072 bind 65536)
[    0.412084] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.412124] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.412185] NET: Registered protocol family 1
[    0.412189] NET: Registered protocol family 44
[    0.412196] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.412580] PCI: CLS 64 bytes, default 64
[    0.412611] Trying to unpack rootfs image as initramfs...
[    0.764561] Freeing initrd memory: 40488K
[    0.781271] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.781276] software IO TLB: mapped [mem 0x6658a000-0x6a58a000] (64MB)
[    0.781610] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.781719] check: Scanning for low memory corruption every 60 seconds
[    0.783409] Initialise system trusted keyrings
[    0.783422] Key type blacklist registered
[    0.783463] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.785139] zbud: loaded
[    0.785575] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.785765] fuse: init (API version 7.31)
[    0.785900] Platform Keyring initialized
[    0.790247] Key type asymmetric registered
[    0.790249] Asymmetric key parser 'x509' registered
[    0.790257] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.790298] io scheduler mq-deadline registered
[    0.790545] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    0.790882] pcieport 0000:00:1c.4: PME: Signaling with IRQ 123
[    0.790935] pcieport 0000:00:1c.4: AER: enabled with IRQ 123
[    0.790974] pcieport 0000:00:1c.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.791231] pcieport 0000:00:1d.0: PME: Signaling with IRQ 124
[    0.791285] pcieport 0000:00:1d.0: AER: enabled with IRQ 124
[    0.791337] pcieport 0000:00:1d.0: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.791560] pcieport 0000:00:1d.4: PME: Signaling with IRQ 125
[    0.791599] pcieport 0000:00:1d.4: AER: enabled with IRQ 125
[    0.791638] pcieport 0000:00:1d.4: DPC: error containment capabilities: Int Msg #0, RPExt+ PoisonedTLP+ SwTrigger+ RP PIO Log 4, DL_ActiveErr+
[    0.791709] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.791787] efifb: probing for efifb
[    0.791800] efifb: framebuffer at 0x80000000, using 8100k, total 8100k
[    0.791802] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.791803] efifb: scrolling: redraw
[    0.791805] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.791883] Console: switching to colour frame buffer device 240x67
[    0.796349] fb0: EFI VGA frame buffer device
[    0.796369] intel_idle: MWAIT substates: 0x11142120
[    0.796370] intel_idle: v0.4.1 model 0x8E
[    0.796716] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.797642] ACPI: AC Adapter [AC] (on-line)
[    0.797711] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.797745] ACPI: Lid Switch [LID0]
[    0.797778] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.797808] ACPI: Power Button [PBTN]
[    0.797839] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.797868] ACPI: Sleep Button [SBTN]
[    0.800471] thermal LNXTHERM:00: registered as thermal_zone0
[    0.800491] ACPI: Thermal Zone [THM] (25 C)
[    0.800618] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.802644] Linux agpgart interface v0.103
[    0.827109] battery: ACPI: Battery Slot [BAT0] (battery present)
[    0.867517] loop: module loaded
[    0.867701] libphy: Fixed MDIO Bus: probed
[    0.867735] tun: Universal TUN/TAP device driver, 1.6
[    0.867776] PPP generic driver version 2.4.2
[    0.867826] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.867849] ehci-pci: EHCI PCI platform driver
[    0.867873] ehci-platform: EHCI generic platform driver
[    0.867902] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.867923] ohci-pci: OHCI PCI platform driver
[    0.867945] ohci-platform: OHCI generic platform driver
[    0.867968] uhci_hcd: USB Universal Host Controller Interface driver
[    0.868224] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.868246] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.869339] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
[    0.869374] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.869547] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    0.869574] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.869610] usb usb1: Product: xHCI Host Controller
[    0.869627] usb usb1: Manufacturer: Linux 5.3.0-46-generic xhci-hcd
[    0.869648] usb usb1: SerialNumber: 0000:00:14.0
[    0.869737] hub 1-0:1.0: USB hub found
[    0.869765] hub 1-0:1.0: 12 ports detected
[    0.871434] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.871474] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.871499] xhci_hcd 0000:00:14.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.871547] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    0.871574] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.871597] usb usb2: Product: xHCI Host Controller
[    0.871614] usb usb2: Manufacturer: Linux 5.3.0-46-generic xhci-hcd
[    0.872589] usb usb2: SerialNumber: 0000:00:14.0
[    0.873636] hub 2-0:1.0: USB hub found
[    0.874614] hub 2-0:1.0: 6 ports detected
[    0.876704] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.878171] i8042: Warning: Keylock active
[    0.880842] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.881842] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.882871] mousedev: PS/2 mouse device common for all mice
[    0.884011] rtc_cmos rtc_cmos: RTC can wake from S4
[    0.885903] rtc_cmos rtc_cmos: registered as rtc0
[    0.886822] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram
[    0.887695] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.888585] i2c /dev entries driver
[    0.889582] device-mapper: uevent: version 1.0.3
[    0.890482] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    0.891321] platform eisa.0: Probing EISA bus 0
[    0.892109] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    0.892894] platform eisa.0: Cannot allocate resource for EISA slot 1
[    0.893980] platform eisa.0: Cannot allocate resource for EISA slot 2
[    0.894735] platform eisa.0: Cannot allocate resource for EISA slot 3
[    0.895498] platform eisa.0: Cannot allocate resource for EISA slot 4
[    0.896213] platform eisa.0: Cannot allocate resource for EISA slot 5
[    0.896893] platform eisa.0: Cannot allocate resource for EISA slot 6
[    0.897557] platform eisa.0: Cannot allocate resource for EISA slot 7
[    0.898217] platform eisa.0: Cannot allocate resource for EISA slot 8
[    0.898856] platform eisa.0: EISA: Detected 0 cards
[    0.899492] intel_pstate: Intel P-state driver initializing
[    0.900828] intel_pstate: HWP enabled
[    0.901795] ledtrig-cpu: registered to indicate activity on CPUs
[    0.902399] EFI Variables Facility v0.08 2004-May-17
[    0.947686] intel_pmc_core INT33A1:00:  initialized
[    0.948477] NET: Registered protocol family 10
[    0.952481] Segment Routing with IPv6
[    0.953111] NET: Registered protocol family 17
[    0.953762] Key type dns_resolver registered
[    0.954790] RAS: Correctable Errors collector initialized.
[    0.955447] microcode: sig=0x806ec, pf=0x80, revision=0xca
[    0.956268] microcode: Microcode Update Driver: v2.2.
[    0.956275] sched_clock: Marking stable (951614956, 4651321)->(961306666, -5040389)
[    0.957745] registered taskstats version 1
[    0.958351] Loading compiled-in X.509 certificates
[    0.959914] Loaded X.509 cert 'Build time autogenerated kernel key: 5650732eee8a3c09a605a6628308b9d1fc90aa8a'
[    0.960524] zswap: loaded using pool lzo/zbud
[    0.964189] Key type big_key registered
[    0.964803] Key type trusted registered
[    0.967305] Key type encrypted registered
[    0.967908] AppArmor: AppArmor sha1 policy hashing enabled
[    0.969759] integrity: Loading X.509 certificate: UEFI:db
[    0.970332] integrity: Loaded X.509 cert 'Dell Inc. UEFI DB: 5ddb772dc880660055ba0bc131886bb630a639e7'
[    0.970895] integrity: Loading X.509 certificate: UEFI:db
[    0.971467] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    0.972063] integrity: Loading X.509 certificate: UEFI:db
[    0.972645] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    0.974637] ima: Allocated hash algorithm: sha1
[    1.153497] No architecture policies found
[    1.154121] evm: Initialising EVM extended attributes:
[    1.154687] evm: security.selinux
[    1.155249] evm: security.SMACK64
[    1.155811] evm: security.SMACK64EXEC
[    1.156369] evm: security.SMACK64TRANSMUTE
[    1.156942] evm: security.SMACK64MMAP
[    1.157534] evm: security.apparmor
[    1.158076] evm: security.ima
[    1.158607] evm: security.capability
[    1.159132] evm: HMAC attrs: 0x1
[    1.161058] PM:   Magic number: 0:657:929
[    1.161938] rtc_cmos rtc_cmos: setting system clock to 2020-04-11T09:55:09 UTC (1586598909)
[    1.162706] Lockdown: swapper/0: Hibernation is restricted; see man kernel_lockdown.7
[    1.164031] Freeing unused decrypted memory: 2040K
[    1.164897] Freeing unused kernel image memory: 2660K
[    1.165498] Write protecting the kernel read-only data: 22528k
[    1.166593] Freeing unused kernel image memory: 2008K
[    1.167477] Freeing unused kernel image memory: 1480K
[    1.172943] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.173557] Run /init as init process
[    1.205206] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.220858] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    1.221892] wmi_bus wmi_bus-PNP0C14:04: WQBC data block query control method not found
[    1.222568] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    1.225244] acpi PNP0C14:05: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    1.228732] hidraw: raw HID events driver (C) Jiri Kosina
[    1.231972] ahci 0000:00:17.0: version 3.0
[    1.232334] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[    1.232755] acpi PNP0C14:06: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    1.234710] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.238664] nvme nvme0: pci function 0000:04:00.0
[    1.244765] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    1.245471] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm clo only pio slum part deso sadm sds apst
[    1.246527] scsi host0: ahci
[    1.247487] ata1: SATA max UDMA/133 abar m2048@0xa5325000 port 0xa5325100 irq 127
[    1.250090] libphy: r8169: probed
[    1.250945] r8169 0000:03:00.0 eth0: RTL8107e, 6c:2b:59:77:b1:8e, XID 541, IRQ 129
[    1.252177] r8169 0000:03:00.0 enp3s0: renamed from eth0
[    1.353316] usb 1-5: New USB device found, idVendor=27c6, idProduct=538c, bcdDevice= 1.00
[    1.354010] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.354679] usb 1-5: Product: FingerPrint
[    1.355326] usb 1-5: Manufacturer: Goodix
[    1.460483] nvme nvme0: allocated 38 MiB host memory buffer.
[    1.485468] usb 1-6: new high-speed USB device number 3 using xhci_hcd
[    1.493285] nvme nvme0: 8/0/0 default/read/poll queues
[    1.496895]  nvme0n1: p1 p2 p3 p4 p5 p6 p7
[    1.523987] usb 1-6: New USB device found, idVendor=0c45, idProduct=671b, bcdDevice=86.14
[    1.524660] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    1.525399] usb 1-6: Product: Integrated_Webcam_HD
[    1.526111] usb 1-6: Manufacturer: CN0HK46K8LG00954A9F3A00
[    1.561948] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.566047] ata1.00: ATA-10: TOSHIBA MQ04ABF100, JU000D, max UDMA/100
[    1.566731] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.571574] ata1.00: configured for UDMA/100
[    1.573392] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ04ABF1 0D   PQ: 0 ANSI: 5
[    1.574278] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.574353] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.575834] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.576589] sd 0:0:0:0: [sda] Write Protect is off
[    1.577346] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.577443] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.654252]  sda: sda1
[    1.655211] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.657207] usb 1-10: new full-speed USB device number 4 using xhci_hcd
[    1.785496] tsc: Refined TSC clocksource calibration: 1991.999 MHz
[    1.786436] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x396d4ffc055, max_idle_ns: 881590662783 ns
[    1.787232] clocksource: Switched to clocksource tsc
[    1.807485] usb 1-10: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
[    1.808164] usb 1-10: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.956784] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.981416] EXT4-fs (nvme0n1p7): mounted filesystem with ordered data mode. Opts: (null)
[    2.023667] psmouse serio1: synaptics: queried max coordinates: x [..5664], y [..4702]
[    2.053487] psmouse serio1: synaptics: queried min coordinates: x [1278..], y [1148..]
[    2.054298] psmouse serio1: synaptics: Your touchpad (PNP: DLL089c PNP0f13) says it can support a different bus. If i2c-hid and hid-rmi are not used, you might want to try setting psmouse.synaptics_intertouch to 1 and report this to linux-input@vger.kernel.org.
[    2.113912] psmouse serio1: synaptics: Touchpad model: 1, fw: 9.16, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x500000, board id: 3238, fw id: 2708489
[    2.156807] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[    2.157788] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    2.177995] systemd[1]: Detected architecture x86-64.
[    2.183610] systemd[1]: Set hostname to <giannispc>.
[    2.185240] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man kernel_lockdown.7
[    2.254359] systemd[1]: Unnecessary job for KBG30ZMS128G NVMe TOSHIBA 128GB 7 was removed.
[    2.255458] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    2.257419] systemd[1]: Created slice System Slice.
[    2.259269] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    2.261129] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.263033] systemd[1]: Reached target Slices.
[    2.264881] systemd[1]: Listening on udev Control Socket.
[    2.279746] EXT4-fs (nvme0n1p7): re-mounted. Opts: (null)
[    2.282845] EXT4-fs (nvme0n1p2): re-mounted. Opts: errors=remount-ro
[    2.282852] lp: driver loaded but no devices found
[    2.286741] ppdev: user-space parallel port driver
[    2.334728] systemd-journald[393]: Received request to flush runtime journal from PID 1
[    2.382472] input: Intel HID events as /devices/platform/INT33D5:00/input/input6
[    2.383870] intel-hid INT33D5:00: platform supports 5 button array
[    2.383901] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7
[    2.398097] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    2.401238] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.402810] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    2.405657] intel_rapl_common: Found RAPL domain package
[    2.405659] intel_rapl_common: Found RAPL domain dram
[    2.406966] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.407755] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[    2.408664] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    2.414843] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.447003] Bluetooth: Core ver 2.22
[    2.447020] NET: Registered protocol family 31
[    2.447021] Bluetooth: HCI device and connection manager initialized
[    2.447025] Bluetooth: HCI socket layer initialized
[    2.447027] Bluetooth: L2CAP socket layer initialized
[    2.447030] Bluetooth: SCO socket layer initialized
[    2.450189] mc: Linux media interface: v0.10
[    2.453472] usbcore: registered new interface driver btusb
[    2.453629] videodev: Linux video capture interface: v2.00
[    2.457530] Bluetooth: hci0: Firmware revision 0.1 build 226 week 31 2019
[    2.459948] Intel(R) Wireless WiFi driver for Linux
[    2.459949] Copyright(c) 2003- 2015 Intel Corporation
[    2.460024] iwlwifi 0000:00:14.3: enabling device (0000 -> 0002)
[    2.462500] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:671b)
[    2.468081] uvcvideo 1-6:1.0: Entity type for entity Extension 4 was not initialized!
[    2.468083] uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized!
[    2.468084] uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
[    2.468085] uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
[    2.468134] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input8
[    2.468181] usbcore: registered new interface driver uvcvideo
[    2.468182] USB Video Class driver (1.1.1)
[    2.474755] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[    2.482836] input: Dell WMI hotkeys as /devices/platform/PNP0C14:04/wmi_bus/wmi_bus-PNP0C14:04/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[    2.493940] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
[    2.493942] iwlwifi 0000:00:14.3: Found debug configuration: 0
[    2.494360] iwlwifi 0000:00:14.3: loaded firmware version 46.6bf1df06.0 op_mode iwlmvm
[    2.506530] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    2.506532] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    2.506532] RAPL PMU: hw unit of domain package 2^-14 Joules
[    2.506533] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    2.506533] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    2.520266] i2c_hid i2c-DELL089C:00: i2c-DELL089C:00 supply vdd not found, using dummy regulator
[    2.520277] i2c_hid i2c-DELL089C:00: i2c-DELL089C:00 supply vddl not found, using dummy regulator
[    2.522824] cryptd: max_cpu_qlen set to 1000
[    2.524934] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9462, REV=0x318
[    2.532963] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[    2.533029] AVX2 version of gcm_enc/dec engaged.
[    2.533030] AES CTR mode by8 optimization enabled
[    2.533583] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor.
[    2.547605] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.576148] iwlwifi 0000:00:14.3: base HW address: 3c:f0:11:1f:93:a7
[    2.582905] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    2.583192] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    2.627734] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.627964] thermal thermal_zone7: failed to read out thermal zone (-61)
[    2.628743] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: (null)
[    2.635514] intel_rapl_common: Found RAPL domain package
[    2.635516] intel_rapl_common: Found RAPL domain core
[    2.635517] intel_rapl_common: Found RAPL domain uncore
[    2.635518] intel_rapl_common: Found RAPL domain dram
[    2.665318] Adding 21483516k swap on /dev/nvme0n1p1.  Priority:-2 extents:1 across:21483516k SSFS
[    2.668146] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[    2.678453] iwlwifi 0000:00:14.3 wlo1: renamed from wlan0
[    2.872301] input: DELL089C:00 06CB:CCA6 Mouse as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL089C:00/0018:06CB:CCA6.0001/input/input10
[    2.872374] input: DELL089C:00 06CB:CCA6 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL089C:00/0018:06CB:CCA6.0001/input/input11
[    2.872429] hid-generic 0018:06CB:CCA6.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL089C:00 06CB:CCA6] on i2c-DELL089C:00
[    3.000938] input: DELL089C:00 06CB:CCA6 Touchpad as /devices/pci0000:00/0000:00:15.0/i2c_designware.0/i2c-0/i2c-DELL089C:00/0018:06CB:CCA6.0001/input/input14
[    3.001046] hid-multitouch 0018:06CB:CCA6.0001: input,hidraw0: I2C HID v1.00 Mouse [DELL089C:00 06CB:CCA6] on i2c-DELL089C:00
[    3.510658] audit: type=1400 audit(1586598911.845:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=780 comm="apparmor_parser"
[    3.510861] audit: type=1400 audit(1586598911.845:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=778 comm="apparmor_parser"
[    3.511424] audit: type=1400 audit(1586598911.845:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=777 comm="apparmor_parser"
[    3.512106] audit: type=1400 audit(1586598911.845:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=783 comm="apparmor_parser"
[    3.512119] audit: type=1400 audit(1586598911.845:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=786 comm="apparmor_parser"
[    3.513328] audit: type=1400 audit(1586598911.849:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=788 comm="apparmor_parser"
[    3.513457] audit: type=1400 audit(1586598911.849:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=784 comm="apparmor_parser"
[    3.513459] audit: type=1400 audit(1586598911.849:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=784 comm="apparmor_parser"
[    3.513461] audit: type=1400 audit(1586598911.849:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=784 comm="apparmor_parser"
[   10.459139] EXT4-fs (sda1): warning: mounting fs with errors, running e2fsck is recommended
[   10.721137] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   62.585707] snd_hda_intel 0000:00:1f.3: couldn't bind with audio component
[   62.637896] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3204: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   62.637898] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   62.637899] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   62.637899] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   62.637900] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   62.637903] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x19
[   62.637904] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[   62.637904] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   62.684955] snd_hda_codec_hdmi hdaudioC0D2: No i915 binding for Intel HDMI/DP codec
[   62.685059] hdaudio hdaudioC0D2: Unable to bind the codec
[   62.685922] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input16
[   81.942331] Generic Realtek PHY r8169-300:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[   82.054677] r8169 0000:03:00.0 enp3s0: Link is Down
[   82.064432] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[   82.156454] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[   82.221526] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[   82.229541] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
[   82.231302] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[   85.274516] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[   85.280584] JFS: nTxBlock = 8192, nTxLock = 65536
[   85.287347] ntfs: driver 2.1.32 [Flags: R/O MODULE].
[   85.296377] QNX4 filesystem 0.2.3 registered.
[   85.349199] raid6: avx2x4   gen() 41967 MB/s
[   85.397198] raid6: avx2x4   xor() 20441 MB/s
[   85.445199] raid6: avx2x2   gen() 36434 MB/s
[   85.493196] raid6: avx2x2   xor() 24927 MB/s
[   85.541196] raid6: avx2x1   gen() 30826 MB/s
[   85.589197] raid6: avx2x1   xor() 22862 MB/s
[   85.637199] raid6: sse2x4   gen() 18043 MB/s
[   85.685198] raid6: sse2x4   xor() 11285 MB/s
[   85.725572] wlo1: authenticate with 98:da:c4:dc:17:fd
[   85.733200] raid6: sse2x2   gen() 14191 MB/s
[   85.734190] wlo1: send auth to 98:da:c4:dc:17:fd (try 1/3)
[   85.755942] wlo1: authenticated
[   85.757203] wlo1: associate with 98:da:c4:dc:17:fd (try 1/3)
[   85.777438] wlo1: RX AssocResp from 98:da:c4:dc:17:fd (capab=0xc11 status=0 aid=5)
[   85.781014] wlo1: associated
[   85.781202] raid6: sse2x2   xor() 10522 MB/s
[   85.829201] raid6: sse2x1   gen() 13760 MB/s
[   85.877200] raid6: sse2x1   xor()  7903 MB/s
[   85.877200] raid6: using algorithm avx2x4 gen() 41967 MB/s
[   85.877200] raid6: .... xor() 20441 MB/s, rmw enabled
[   85.877201] raid6: using avx2x2 recovery algorithm
[   85.880464] xor: automatically using best checksumming function   avx       
[   85.894299] Btrfs loaded, crc32c=crc32c-intel
[   85.903943] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   90.054246] Lockdown: Xorg: ioperm is restricted; see man kernel_lockdown.7
[   90.734647] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   90.734649] Bluetooth: BNEP filters: protocol multicast
[   90.734653] Bluetooth: BNEP socket layer initialized
[   97.416642] Bluetooth: RFCOMM TTY layer initialized
[   97.416648] Bluetooth: RFCOMM socket layer initialized
[   97.416652] Bluetooth: RFCOMM ver 1.11
[   98.155071] rfkill: input handler disabled
[  107.181452] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 1)
[  107.181452] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 1)
[  107.181453] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1)
[  107.181454] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1)
[  107.181455] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1)
[  107.181456] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1)
[  107.181456] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1)
[  107.181457] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1)
[  107.181481] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1)
[  107.181482] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1)
[  107.182443] mce: CPU3: Core temperature/speed normal
[  107.182443] mce: CPU1: Package temperature/speed normal
[  107.182444] mce: CPU7: Core temperature/speed normal
[  107.182444] mce: CPU5: Package temperature/speed normal
[  107.182445] mce: CPU7: Package temperature/speed normal
[  107.182445] mce: CPU3: Package temperature/speed normal
[  107.182472] mce: CPU0: Package temperature/speed normal
[  107.182473] mce: CPU4: Package temperature/speed normal
[  107.182474] mce: CPU2: Package temperature/speed normal
[  107.182474] mce: CPU6: Package temperature/speed normal
[  316.499496] EXT4-fs (sda1): error count since last fsck: 85
[  316.499503] EXT4-fs (sda1): initial error at time 1586026136: ext4_lookup:1704: inode 4593384
[  316.499510] EXT4-fs (sda1): last error at time 1586216677: ext4_lookup:1704: inode 4593384
[ 1452.191611] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[ 1452.212203] usb 1-1: New USB device found, idVendor=14cd, idProduct=6116, bcdDevice= 2.20
[ 1452.212205] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
[ 1452.212205] usb 1-1: Product: USB Mass Storage Device
[ 1452.212206] usb 1-1: Manufacturer: Generic     
[ 1452.212206] usb 1-1: SerialNumber: 116AC2101219
[ 1452.224270] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1452.224456] scsi host1: usb-storage 1-1:1.0
[ 1452.224546] usbcore: registered new interface driver usb-storage
[ 1452.226106] usbcore: registered new interface driver uas
[ 1453.228041] scsi 1:0:0:0: Direct-Access        Mass  Storage Device        PQ: 0 ANSI: 0
[ 1453.228380] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1453.228563] sd 1:0:0:0: [sdb] 976773166 512-byte logical blocks: (500 GB/466 GiB)
[ 1453.228679] sd 1:0:0:0: [sdb] Write Protect is off
[ 1453.228681] sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 1453.228798] sd 1:0:0:0: [sdb] No Caching mode page found
[ 1453.228798] sd 1:0:0:0: [sdb] Assuming drive cache: write through
[ 1453.249274]  sdb: sdb1
[ 1453.250060] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1892.043337] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043338] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043339] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043340] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043341] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043341] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043380] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043381] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043382] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.043383] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 3)
[ 1892.044416] mce: CPU7: Core temperature/speed normal
[ 1892.044417] mce: CPU6: Package temperature/speed normal
[ 1892.044417] mce: CPU3: Core temperature/speed normal
[ 1892.044417] mce: CPU7: Package temperature/speed normal
[ 1892.044418] mce: CPU2: Package temperature/speed normal
[ 1892.044418] mce: CPU3: Package temperature/speed normal
[ 1892.044452] mce: CPU5: Package temperature/speed normal
[ 1892.044458] mce: CPU0: Package temperature/speed normal
[ 1892.044458] mce: CPU4: Package temperature/speed normal
[ 1892.044461] mce: CPU1: Package temperature/speed normal
[ 3691.830216] mce: CPU5: Core temperature above threshold, cpu clock throttled (total events = 418)
[ 3691.830216] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 418)
[ 3691.830217] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 587)
[ 3691.830218] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 587)
[ 3691.830219] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 587)
[ 3691.830219] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 587)
[ 3691.830254] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 587)
[ 3691.830254] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 587)
[ 3691.830255] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 587)
[ 3691.830256] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 587)
[ 3691.831210] mce: CPU5: Core temperature/speed normal
[ 3691.831211] mce: CPU7: Package temperature/speed normal
[ 3691.831211] mce: CPU3: Package temperature/speed normal
[ 3691.831212] mce: CPU1: Core temperature/speed normal
[ 3691.831212] mce: CPU5: Package temperature/speed normal
[ 3691.831212] mce: CPU1: Package temperature/speed normal
[ 3691.831248] mce: CPU0: Package temperature/speed normal
[ 3691.831248] mce: CPU4: Package temperature/speed normal
[ 3691.831249] mce: CPU2: Package temperature/speed normal
[ 3691.831250] mce: CPU6: Package temperature/speed normal
[ 4416.060099] wlo1: deauthenticating from 98:da:c4:dc:17:fd by local choice (Reason: 3=DEAUTH_LEAVING)
[ 4416.567866] PM: suspend entry (s2idle)
[ 4416.652753] Filesystems sync: 0.084 seconds
[ 4416.678816] rfkill: input handler enabled
[ 4416.699450] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 4416.702422] OOM killer disabled.
[ 4416.702423] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 4416.703723] printk: Suspending console(s) (use no_console_suspend to debug)
[ 4416.734984] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4416.735190] sd 0:0:0:0: [sda] Stopping disk
[ 4416.907117] psmouse serio1: Failed to disable mouse on isa0060/serio1
[19475.830610] pci 0000:02:00.0: Enabling HDA controller
[19475.844209] sd 0:0:0:0: [sda] Starting disk
[19476.157101] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[19476.204925] ata1.00: configured for UDMA/100
[19478.188068] OOM killer enabled.
[19478.188071] Restarting tasks ... done.
[19478.215704] thermal thermal_zone7: failed to read out thermal zone (-61)
[19478.259925] PM: suspend exit
[19478.470318] rfkill: input handler disabled
[19478.471337] Generic Realtek PHY r8169-300:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE)
[19478.581810] r8169 0000:03:00.0 enp3s0: Link is Down
[19478.590394] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[19478.681800] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
[19478.746650] iwlwifi 0000:00:14.3: FW already configured (0) - re-configuring
[19478.754111] iwlwifi 0000:00:14.3: Conflict between TLV & NVM regarding enabling LAR (TLV = enabled NVM =disabled)
[19478.755808] iwlwifi 0000:00:14.3: BIOS contains WGDS but no WRDS
[19482.269811] wlo1: authenticate with 98:da:c4:dc:17:fd
[19482.273948] wlo1: send auth to 98:da:c4:dc:17:fd (try 1/3)
[19482.295761] wlo1: authenticated
[19482.296794] wlo1: associate with 98:da:c4:dc:17:fd (try 1/3)
[19482.316937] wlo1: RX AssocResp from 98:da:c4:dc:17:fd (capab=0xc11 status=0 aid=5)
[19482.321132] wlo1: associated
[19482.442942] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[19494.563850] wlo1: deauthenticating from 98:da:c4:dc:17:fd by local choice (Reason: 3=DEAUTH_LEAVING)
[19497.542131] wlo1: authenticate with 98:da:c4:dc:17:fd
[19497.546872] wlo1: send auth to 98:da:c4:dc:17:fd (try 1/3)
[19497.569104] wlo1: authenticated
[19497.576647] iwlwifi 0000:00:14.3: Unhandled alg: 0x707
[19497.576727] wlo1: associate with 98:da:c4:dc:17:fd (try 1/3)
[19497.599609] wlo1: RX AssocResp from 98:da:c4:dc:17:fd (capab=0xc11 status=0 aid=5)
[19497.602148] wlo1: associated
[19497.731277] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[20577.649469] ACPI Error: Thread 600420096 cannot release Mutex [PATM] acquired by thread 323700352 (20190703/exmutex-382)
[20577.649481] No Local Variables are initialized for Method [_Q66]
[20577.649483] No Arguments are initialized for method [_Q66]
[20577.649485] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190703/psparse-531)
[22105.246766] ACPI Error: Thread 601212544 cannot release Mutex [PATM] acquired by thread 323700352 (20190703/exmutex-382)
[22105.246776] No Local Variables are initialized for Method [_Q66]
[22105.246778] No Arguments are initialized for method [_Q66]
[22105.246780] ACPI Error: Aborting method \_SB.PCI0.LPCB.ECDV._Q66 due to previous error (AE_AML_NOT_OWNER) (20190703/psparse-531)
[24824.516627] perf: interrupt took too long (2538 > 2500), lowering kernel.perf_event_max_sample_rate to 78750
[27050.034018] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 170)
[27050.034018] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 170)
[27050.034019] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 596)
[27050.034020] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 596)
[27050.034062] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 596)
[27050.034063] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 596)
[27050.034063] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 596)
[27050.034064] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 596)
[27050.034065] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 596)
[27050.034066] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 596)
[27050.034999] mce: CPU3: Core temperature/speed normal
[27050.034999] mce: CPU7: Core temperature/speed normal
[27050.035000] mce: CPU7: Package temperature/speed normal
[27050.035000] mce: CPU3: Package temperature/speed normal
[27050.035043] mce: CPU2: Package temperature/speed normal
[27050.035044] mce: CPU6: Package temperature/speed normal
[27050.035045] mce: CPU0: Package temperature/speed normal
[27050.035045] mce: CPU4: Package temperature/speed normal
[27050.035046] mce: CPU5: Package temperature/speed normal
[27050.035047] mce: CPU1: Package temperature/speed normal
[27284.977768] perf: interrupt took too long (3173 > 3172), lowering kernel.perf_event_max_sample_rate to 63000
[27350.132171] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 186)
[27350.132172] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 661)
[27350.132173] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 661)
[27350.132174] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 661)
[27350.132175] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 186)
[27350.132175] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 661)
[27350.132176] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 661)
[27350.132177] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 661)
[27350.132200] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 661)
[27350.132201] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 661)
[27357.893167] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 485)
[27357.893168] mce: CPU5: Core temperature above threshold, cpu clock throttled (total events = 485)
[27357.922171] mce: CPU1: Core temperature/speed normal
[27357.922172] mce: CPU5: Core temperature/speed normal
[27665.725341] mce: CPU5: Core temperature above threshold, cpu clock throttled (total events = 804)
[27665.725341] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 804)
[27665.725342] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1089)
[27665.725344] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1089)
[27665.725344] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1089)
[27665.725345] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1089)
[27665.725346] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1089)
[27665.725347] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1089)
[27665.725347] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1089)
[27665.725348] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1089)
[27665.726226] mce: CPU5: Core temperature/speed normal
[27665.726227] mce: CPU1: Core temperature/speed normal
[27665.726228] mce: CPU4: Package temperature/speed normal
[27665.726228] mce: CPU6: Package temperature/speed normal
[27665.726229] mce: CPU3: Package temperature/speed normal
[27665.726230] mce: CPU0: Package temperature/speed normal
[27665.726230] mce: CPU2: Package temperature/speed normal
[27665.726231] mce: CPU7: Package temperature/speed normal
[27665.726231] mce: CPU1: Package temperature/speed normal
[27665.726232] mce: CPU5: Package temperature/speed normal
[36182.573645] perf: interrupt took too long (4004 > 3966), lowering kernel.perf_event_max_sample_rate to 49750
[41548.048241] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 391)
[41548.048243] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1224)
[41548.048244] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1224)
[41548.048245] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1224)
[41548.048245] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 391)
[41548.048246] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1224)
[41548.048247] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1224)
[41548.048248] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1224)
[41548.048249] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1224)
[41548.048250] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1224)
[41548.049268] mce: CPU3: Core temperature/speed normal
[41548.049269] mce: CPU7: Core temperature/speed normal
[41548.049269] mce: CPU1: Package temperature/speed normal
[41548.049270] mce: CPU6: Package temperature/speed normal
[41548.049271] mce: CPU4: Package temperature/speed normal
[41548.049271] mce: CPU5: Package temperature/speed normal
[41548.049272] mce: CPU2: Package temperature/speed normal
[41548.049272] mce: CPU0: Package temperature/speed normal
[41548.049273] mce: CPU7: Package temperature/speed normal
[41548.049274] mce: CPU3: Package temperature/speed normal
[41851.027339] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 401)
[41851.027340] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1262)
[41851.027341] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1262)
[41851.027341] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 401)
[41851.027342] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1262)
[41851.027343] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1262)
[41851.027344] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1262)
[41851.027345] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1262)
[41851.027368] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1262)
[41851.027368] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1262)
[41851.028397] mce: CPU3: Core temperature/speed normal
[41851.028398] mce: CPU4: Package temperature/speed normal
[41851.028399] mce: CPU0: Package temperature/speed normal
[41851.028399] mce: CPU7: Core temperature/speed normal
[41851.028400] mce: CPU5: Package temperature/speed normal
[41851.028400] mce: CPU1: Package temperature/speed normal
[41851.028401] mce: CPU2: Package temperature/speed normal
[41851.028402] mce: CPU6: Package temperature/speed normal
[41851.028402] mce: CPU7: Package temperature/speed normal
[41851.028403] mce: CPU3: Package temperature/speed normal
[42204.398547] mce: CPU5: Core temperature above threshold, cpu clock throttled (total events = 948)
[42204.398548] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1330)
[42204.398549] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 948)
[42204.398549] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1330)
[42204.398550] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1330)
[42204.398551] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1330)
[42204.398585] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1330)
[42204.398585] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1330)
[42204.398587] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1330)
[42204.398587] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1330)
[42204.399514] mce: CPU5: Core temperature/speed normal
[42204.399514] mce: CPU4: Package temperature/speed normal
[42204.399515] mce: CPU1: Core temperature/speed normal
[42204.399516] mce: CPU0: Package temperature/speed normal
[42204.399516] mce: CPU5: Package temperature/speed normal
[42204.399517] mce: CPU1: Package temperature/speed normal
[42204.399554] mce: CPU6: Package temperature/speed normal
[42204.399555] mce: CPU3: Package temperature/speed normal
[42204.399555] mce: CPU2: Package temperature/speed normal
[42204.399556] mce: CPU7: Package temperature/speed normal
[42544.615709] perf: interrupt took too long (5017 > 5005), lowering kernel.perf_event_max_sample_rate to 39750
[46721.803824] mce: CPU7: Core temperature above threshold, cpu clock throttled (total events = 497)
[46721.803825] mce: CPU3: Core temperature above threshold, cpu clock throttled (total events = 497)
[46721.803826] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 1393)
[46721.803827] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 1393)
[46721.803828] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 1393)
[46721.803829] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 1393)
[46721.803830] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 1393)
[46721.803831] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 1393)
[46721.803831] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 1393)
[46721.803832] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 1393)
[47032.519040] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2622)
[47032.519041] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 2622)
[47032.519088] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 2622)
[47032.519089] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2622)
[47032.519090] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2622)
[47032.519091] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 2622)
[47032.519092] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2622)
[47032.519093] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 2622)
[47032.600026] mce: CPU4: Package temperature/speed normal
[47032.600027] mce: CPU0: Package temperature/speed normal
[47032.600043] mce: CPU1: Package temperature/speed normal
[47032.600044] mce: CPU5: Package temperature/speed normal
[47032.600045] mce: CPU6: Package temperature/speed normal
[47032.600046] mce: CPU2: Package temperature/speed normal
[47032.600060] mce: CPU7: Package temperature/speed normal
[47032.600060] mce: CPU3: Package temperature/speed normal
[47403.516147] mce: CPU4: Core temperature above threshold, cpu clock throttled (total events = 52)
[47403.516148] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 52)
[47403.516149] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2669)
[47403.516149] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 2669)
[47403.516196] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2669)
[47403.516197] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2669)
[47403.516198] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 2669)
[47403.516198] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 2669)
[47403.516200] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2669)
[47403.516200] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 2669)
[47403.518127] mce: CPU4: Core temperature/speed normal
[47403.518128] mce: CPU0: Core temperature/speed normal
[47403.518128] mce: CPU4: Package temperature/speed normal
[47403.518129] mce: CPU0: Package temperature/speed normal
[47403.518171] mce: CPU1: Package temperature/speed normal
[47403.518172] mce: CPU5: Package temperature/speed normal
[47403.518173] mce: CPU3: Package temperature/speed normal
[47403.518173] mce: CPU6: Package temperature/speed normal
[47403.518174] mce: CPU2: Package temperature/speed normal
[47403.518175] mce: CPU7: Package temperature/speed normal
[47740.422338] mce: CPU0: Core temperature above threshold, cpu clock throttled (total events = 143)
[47740.422339] mce: CPU4: Core temperature above threshold, cpu clock throttled (total events = 143)
[47740.422340] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 2761)
[47740.422340] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2761)
[47740.422386] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2761)
[47740.422387] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2761)
[47740.422388] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 2761)
[47740.422389] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2761)
[47740.422390] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 2761)
[47740.422391] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 2761)
[47740.444534] mce: CPU0: Core temperature/speed normal
[47740.444535] mce: CPU4: Core temperature/speed normal
[47740.444536] mce: CPU4: Package temperature/speed normal
[47740.444536] mce: CPU0: Package temperature/speed normal
[47740.444584] mce: CPU1: Package temperature/speed normal
[47740.444585] mce: CPU2: Package temperature/speed normal
[47740.444588] mce: CPU5: Package temperature/speed normal
[47740.444591] mce: CPU6: Package temperature/speed normal
[47740.444595] mce: CPU3: Package temperature/speed normal
[47740.444595] mce: CPU7: Package temperature/speed normal
[48075.917505] mce: CPU5: Core temperature above threshold, cpu clock throttled (total events = 2197)
[48075.917506] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 2197)
[48075.917507] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2911)
[48075.917507] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 2911)
[48075.917549] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 2911)
[48075.917550] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2911)
[48075.917551] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2911)
[48075.917552] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 2911)
[48075.917553] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 2911)
[48075.917554] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2911)
[48075.936467] mce: CPU1: Core temperature/speed normal
[48075.936468] mce: CPU5: Core temperature/speed normal
[48075.936469] mce: CPU7: Package temperature/speed normal
[48075.936470] mce: CPU0: Package temperature/speed normal
[48075.936471] mce: CPU2: Package temperature/speed normal
[48075.936471] mce: CPU3: Package temperature/speed normal
[48075.936472] mce: CPU4: Package temperature/speed normal
[48075.936473] mce: CPU6: Package temperature/speed normal
[48075.936473] mce: CPU5: Package temperature/speed normal
[48075.936474] mce: CPU1: Package temperature/speed normal
[48544.593720] mce: CPU1: Core temperature above threshold, cpu clock throttled (total events = 2217)
[48544.593720] mce: CPU5: Core temperature above threshold, cpu clock throttled (total events = 2217)
[48544.593721] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593722] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593764] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593765] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593765] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593766] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593767] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593768] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.594748] mce: CPU5: Core temperature/speed normal
[48544.594749] mce: CPU2: Package temperature/speed normal
[48544.594749] mce: CPU1: Core temperature/speed normal
[48544.594750] mce: CPU6: Package temperature/speed normal
[48544.594750] mce: CPU1: Package temperature/speed normal
[48544.594751] mce: CPU5: Package temperature/speed normal
[48544.594786] mce: CPU7: Package temperature/speed normal
[48544.594786] mce: CPU0: Package temperature/speed normal
[48544.594787] mce: CPU3: Package temperature/speed normal
[48544.594788] mce: CPU4: Package temperature/speed normal
gmbous
babeTUX
babeTUX
 
Δημοσιεύσεις: 8
Εγγραφή: 09 Απρ 2020, 02:46
Εκτύπωση

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό the_eye » 12 Απρ 2020, 11:59

Κάτι που υποπτεύθηκα από τον δίσκο μου το επιβεβαίωσε το dmesg.
smart
Κώδικας: Επιλογή όλων
Temperature Sensor 1:               39 Celsius


dmesg
Κώδικας: Επιλογή όλων
[48544.593720] mce: CPU5: Core temperature above threshold, cpu clock throttled (total events = 2217)
[48544.593721] mce: CPU5: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593722] mce: CPU1: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593764] mce: CPU4: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593765] mce: CPU7: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593765] mce: CPU0: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593766] mce: CPU2: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593767] mce: CPU3: Package temperature above threshold, cpu clock throttled (total events = 2942)
[48544.593768] mce: CPU6: Package temperature above threshold, cpu clock throttled (total events = 2942)


Το σύστημά σου ψήνετε από θερμοκρασίες !!!
Πρέπει να δεις γιατί ; Θέλει καθάρισμα ; Χάλασε κάποια ψήκτρα ; Έκλεισαν οι αεραγωγοί ; Κάτι άλλο ;
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 5.3.0-53-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11579
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό gmbous » 12 Απρ 2020, 17:40

Περιπου σε ποια τιμη πρεπει να ειναι το Temperature Sensor 1 για εναν Intel Core i7? (Αναφερω οτι ,επειδη προγραμματιζω συχνα, οταν τρεχω καποιο προγραμμα, μπορει να φτασει και 47 βαθμους ή και παραπάνω)
Παντως το laptop ειναι καινουριο, οποτε ισως υπηρχε καποιο ελαττωμα εξ'αρχης, δηλαδη δεν νομιζω να θελει καθαρισμα. Σε καθε περιπτωση θα το δωσω για σερβις. Μπορει ομως η υψηλη θερμοκρασια να εχει σχεση με το προβλημα στο λειτουργικο?
gmbous
babeTUX
babeTUX
 
Δημοσιεύσεις: 8
Εγγραφή: 09 Απρ 2020, 02:46
Εκτύπωση

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό Maras » 12 Απρ 2020, 19:41

Μπορεί να φταίει και το ανεμιστηράκι, το ακούς να δουλεύει, όταν χρησιμοποιείς το λάπτοπ?
“Long is the way, and hard, that out of hell leads up to light.”
Άβαταρ μέλους
Maras
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 1006
Εγγραφή: 25 Ιούλ 2017, 12:49
Εκτύπωση

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό the_eye » 12 Απρ 2020, 20:11

Κώδικας: Επιλογή όλων
Package temperature above threshold, cpu clock throttled

Αφού είσαι και προγραμματιστής θα πρέπει να ξέρεις τι λέει το παραπάνω μήνυμα.
Ότι λόγο της αυξημένης θερμοκρασίας, ο επεξεργαστής λειτουργεί σε χαμηλότερη ταχύτητα για να μειώσει την θερμοκρασία του.
Αυτό συμβαίνει σχεδόν λίγο μετά το άνοιγμα του υπολογιστή !

Ακόμα φαίνεται και ένα σφάλμα στον δίσκο sata
Κώδικας: Επιλογή όλων
[  316.499503] EXT4-fs (sda1): initial error at time 1586026136: ext4_lookup:1704: inode 4593384
[  316.499510] EXT4-fs (sda1): last error at time 1586216677: ext4_lookup:1704: inode 4593384
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 5.3.0-53-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11579
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό gmbous » 12 Απρ 2020, 20:38

Ο ανεμιστήρας λειτουργει, τον ακουω. Οσον αφορα στο μηνυμα, το καταλαβα, αλλα δεν ξερω πως μπορει να επηρρεασει το OS η θερμοκρασια και γιατι τις πρωτες εβδομαδες μετα το φορματ λειτουργει κανονικα, ενω μετα εμφανιζεται το προβλημα.
Σε καθε περιπτωση, σας ευχαριστω για τις πληροφορίες και για το χρόνο σας!
gmbous
babeTUX
babeTUX
 
Δημοσιεύσεις: 8
Εγγραφή: 09 Απρ 2020, 02:46
Εκτύπωση

Re: Emergency mode κατά την εκκίνηση

Δημοσίευσηαπό the_eye » 12 Απρ 2020, 20:47

Η θερμοκρασία αυξάνει το αριθμό σφαλμάτων στα κυκλώματα, όταν υπερβεί το ασφαλές όριο τότε μπορεί να έχουμε μέχρι και καταστροφή κάποιου κυκλώματος.
Δυστυχώς τα προβλήματα αυτά είναι αθροιστικά και μόνιμα. Δηλαδή ακόμα και όταν θα πέσει η θερμοκρασία, οποιαδήποτε βλάβη υπάρχει θα παραμείνει.

Δες ως παράδειγμα πως διαχειρίζονται αυτό το θέμα οι μνήμες ECC των servers.
https://en.wikipedia.org/wiki/ECC_memory
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 5.3.0-53-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11579
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Προηγούμενη

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Λειτουργικό Σύστημα