dmesg μηνύματα

...εγκαταστάσεις, αναβαθμίσεις, διαχείριση partitions, boot-loader, κλπ

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Στην ενότητα αυτή γράφουμε θέματα/ προβλήματα μόνο για το UBUNTU ή τα παράγωγά του.

dmesg μηνύματα

Δημοσίευσηαπό bobptz » 08 Ιούλ 2020, 21:57

Καλησπέρα

Ψάχνοντας κάτι άλλο, βρήκα κάποια errors και warnings στο dmesg. Είναι κάτι ανησυχητικό?

Κώδικας: Επιλογή όλων
[    1.025087] RAS: Correctable Errors collector initialized.
................
[    5.607958] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
..................
[    5.964989] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190703/utaddress-213)
[    5.964995] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.965001] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)
[    5.965004] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.965008] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190703/utaddress-213)
[    5.965010] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)
[    5.965013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.965017] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190703/utaddress-213)
[    5.965018] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)




Εδώ ολόκληρο το dmesg:
Κώδικας: Επιλογή όλων
$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x28, date = 2019-11-12
[    0.000000] Linux version 5.3.0-62-generic (buildd@lcy01-amd64-004) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #56~18.04.1-Ubuntu SMP Wed Jun 24 16:17:03 UTC 2020 (Ubuntu 5.3.0-62.56~18.04.1-generic 5.3.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-62-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai 
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b96abfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b96ac000-0x00000000b96b2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b96b3000-0x00000000ba320fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba321000-0x00000000ba7f7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba7f8000-0x00000000cd43cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd43d000-0x00000000cd4a3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd4a4000-0x00000000cd4ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd4ec000-0x00000000cd620fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd621000-0x00000000cdffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Pro3, BIOS P2.30 03/08/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3192.874 MHz processor
[    0.001837] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001839] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001843] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.001846] MTRR default type: uncachable
[    0.001847] MTRR fixed ranges enabled:
[    0.001848]   00000-9FFFF write-back
[    0.001848]   A0000-BFFFF uncachable
[    0.001849]   C0000-CFFFF write-protect
[    0.001849]   D0000-E7FFF uncachable
[    0.001850]   E8000-FFFFF write-protect
[    0.001850] MTRR variable ranges enabled:
[    0.001851]   0 base 0000000000 mask 7E00000000 write-back
[    0.001852]   1 base 0200000000 mask 7FE0000000 write-back
[    0.001853]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.001853]   3 base 00D0000000 mask 7FF0000000 uncachable
[    0.001854]   4 base 00CF000000 mask 7FFF000000 uncachable
[    0.001854]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.001855]   6 disabled
[    0.001855]   7 disabled
[    0.001855]   8 disabled
[    0.001856]   9 disabled
[    0.002091] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.002196] total RAM covered: 7918M
[    0.002430] Found optimal setting for mtrr clean up
[    0.002430]  gran_size: 64K    chunk_size: 32M    num_reg: 7     lose cover RAM: 0G
[    0.002639] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[    0.002642] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.008744] found SMP MP-table at [mem 0x000fd160-0x000fd16f]
[    0.025695] check: Scanning 1 areas for low memory corruption
[    0.025697] Using GB pages for direct mapping
[    0.025699] BRK [0x11c601000, 0x11c601fff] PGTABLE
[    0.025700] BRK [0x11c602000, 0x11c602fff] PGTABLE
[    0.025701] BRK [0x11c603000, 0x11c603fff] PGTABLE
[    0.025730] BRK [0x11c604000, 0x11c604fff] PGTABLE
[    0.025731] BRK [0x11c605000, 0x11c605fff] PGTABLE
[    0.025870] BRK [0x11c606000, 0x11c606fff] PGTABLE
[    0.025894] BRK [0x11c607000, 0x11c607fff] PGTABLE
[    0.025950] BRK [0x11c608000, 0x11c608fff] PGTABLE
[    0.025981] BRK [0x11c609000, 0x11c609fff] PGTABLE
[    0.025997] BRK [0x11c60a000, 0x11c60afff] PGTABLE
[    0.026035] BRK [0x11c60b000, 0x11c60bfff] PGTABLE
[    0.026147] BRK [0x11c60c000, 0x11c60cfff] PGTABLE
[    0.026203] RAMDISK: [mem 0x3026b000-0x3412cfff]
[    0.026208] ACPI: Early table checksum verification disabled
[    0.026210] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.026213] ACPI: XSDT 0x00000000CD5F0088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.026216] ACPI: FACP 0x00000000CD6006D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.026220] ACPI: DSDT 0x00000000CD5F01A8 01052F (v02 ALASKA A M I    00000230 INTL 20120711)
[    0.026222] ACPI: FACS 0x00000000CD620F80 000040
[    0.026224] ACPI: APIC 0x00000000CD6007E8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.026226] ACPI: FPDT 0x00000000CD600860 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.026228] ACPI: SSDT 0x00000000CD6008A8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.026230] ACPI: SSDT 0x00000000CD600DE8 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.026232] ACPI: SSDT 0x00000000CD601960 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20051117)
[    0.026234] ACPI: MCFG 0x00000000CD601B28 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.026236] ACPI: HPET 0x00000000CD601B68 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.026238] ACPI: SSDT 0x00000000CD601BA0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.026240] ACPI: SSDT 0x00000000CD601F10 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.026242] ACPI: AAFT 0x00000000CD607A70 00031D (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.026243] ACPI: UEFI 0x00000000CD607D90 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.026245] ACPI: DMAR 0x00000000CD607DD8 0000B8 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.026252] ACPI: Local APIC address 0xfee00000
[    0.026324] No NUMA configuration found
[    0.026325] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.026333] NODE_DATA(0) allocated [mem 0x21fdd5000-0x21fdfffff]
[    0.026504] Zone ranges:
[    0.026504]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.026505]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.026506]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.026507]   Device   empty
[    0.026507] Movable zone start for each node
[    0.026510] Early memory node ranges
[    0.026510]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.026511]   node   0: [mem 0x0000000000100000-0x00000000b96abfff]
[    0.026512]   node   0: [mem 0x00000000b96b3000-0x00000000ba320fff]
[    0.026512]   node   0: [mem 0x00000000ba7f8000-0x00000000cd43cfff]
[    0.026513]   node   0: [mem 0x00000000cd4a4000-0x00000000cd4ebfff]
[    0.026513]   node   0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[    0.026513]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.026609] Zeroed struct page in unavailable ranges: 12988 pages
[    0.026610] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.026611] On node 0 totalpages: 2018628
[    0.026611]   DMA zone: 64 pages used for memmap
[    0.026612]   DMA zone: 21 pages reserved
[    0.026612]   DMA zone: 3996 pages, LIFO batch:0
[    0.026652]   DMA32 zone: 13055 pages used for memmap
[    0.026652]   DMA32 zone: 835496 pages, LIFO batch:63
[    0.034742]   Normal zone: 18424 pages used for memmap
[    0.034743]   Normal zone: 1179136 pages, LIFO batch:63
[    0.044872] Reserving Intel graphics memory at [mem 0xcf200000-0xdf1fffff]
[    0.044944] ACPI: PM-Timer IO Port: 0x1808
[    0.044946] ACPI: Local APIC address 0xfee00000
[    0.044950] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.044959] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.044961] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.044962] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.044963] ACPI: IRQ0 used by override.
[    0.044963] ACPI: IRQ9 used by override.
[    0.044965] Using ACPI (MADT) for SMP configuration information
[    0.044966] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.044969] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.044983] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.044984] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.044984] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.044985] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.044985] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.044986] PM: Registered nosave memory: [mem 0xb96ac000-0xb96b2fff]
[    0.044987] PM: Registered nosave memory: [mem 0xba321000-0xba7f7fff]
[    0.044988] PM: Registered nosave memory: [mem 0xcd43d000-0xcd4a3fff]
[    0.044989] PM: Registered nosave memory: [mem 0xcd4ec000-0xcd620fff]
[    0.044990] PM: Registered nosave memory: [mem 0xcd621000-0xcdffefff]
[    0.044991] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[    0.044991] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[    0.044992] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.044992] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.044993] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.044993] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.044993] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.044994] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.044994] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.044994] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.044995] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.044995] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.044996] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.044996] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.044997] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.044998] Booting paravirtualized kernel on bare hardware
[    0.045000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.045004] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.045131] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.045136] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.045136] pcpu-alloc: [0] 0 1 2 3
[    0.045157] Built 1 zonelists, mobility grouping on.  Total pages: 1987064
[    0.045158] Policy zone: Normal
[    0.045159] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-62-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.045547] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.045725] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.045762] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.048459] Calgary: detecting Calgary via BIOS EBDA area
[    0.048461] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.064614] Memory: 7770872K/8074512K available (14339K kernel code, 2369K rwdata, 4672K rodata, 2664K init, 5072K bss, 303640K reserved, 0K cma-reserved)
[    0.064619] random: get_random_u64 called from __kmem_cache_create+0x41/0x550 with crng_init=0
[    0.064718] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.064727] Kernel/User page tables isolation: enabled
[    0.064737] ftrace: allocating 43329 entries in 170 pages
[    0.077712] rcu: Hierarchical RCU implementation.
[    0.077713] rcu:    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.077713]    Tasks RCU enabled.
[    0.077714] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.077714] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.080022] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.080285] random: crng done (trusting CPU's manufacturer)
[    0.080300] spurious 8259A interrupt: IRQ7.
[    0.080311] vt handoff: transparent VT on vt#1
[    0.080316] Console: colour dummy device 80x25
[    0.080319] printk: console [tty0] enabled
[    0.080331] ACPI: Core revision 20190703
[    0.080430] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.080439] APIC: Switch to symmetric I/O mode setup
[    0.080440] DMAR: Host address width 39
[    0.080441] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.080444] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.080445] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.080447] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.080448] DMAR: RMRR base: 0x000000cdea5000 end: 0x000000cdeb3fff
[    0.080448] DMAR: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[    0.080450] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.080450] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.080451] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.080451] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.080793] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.080793] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.081182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.100439] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e05fec5ed1, max_idle_ns: 440795356672 ns
[    0.100442] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.74 BogoMIPS (lpj=12771496)
[    0.100443] pid_max: default: 32768 minimum: 301
[    0.100468] LSM: Security Framework initializing
[    0.100474] Yama: becoming mindful.
[    0.100496] AppArmor: AppArmor initialized
[    0.100529] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.100540] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.100655] *** VALIDATE proc ***
[    0.100689] *** VALIDATE cgroup1 ***
[    0.100690] *** VALIDATE cgroup2 ***
[    0.100733] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.100745] process: using mwait in idle threads
[    0.100747] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.100748] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.100749] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.100750] Spectre V2 : Mitigation: Full generic retpoline
[    0.100750] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.100751] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.100752] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.100753] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.100755] SRBDS: Mitigation: Microcode
[    0.100756] MDS: Mitigation: Clear CPU buffers
[    0.100886] Freeing SMP alternatives memory: 40K
[    0.102455] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.102540] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.102552] ... version:                3
[    0.102553] ... bit width:              48
[    0.102553] ... generic registers:      8
[    0.102554] ... value mask:             0000ffffffffffff
[    0.102554] ... max period:             00007fffffffffff
[    0.102554] ... fixed-purpose events:   3
[    0.102555] ... event mask:             00000007000000ff
[    0.102581] rcu: Hierarchical SRCU implementation.
[    0.103280] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.103325] smp: Bringing up secondary CPUs ...
[    0.103393] x86: Booting SMP configuration:
[    0.103394] .... node  #0, CPUs:      #1 #2 #3
[    0.105951] smp: Brought up 1 node, 4 CPUs
[    0.105951] smpboot: Max logical packages: 1
[    0.105951] smpboot: Total of 4 processors activated (25542.99 BogoMIPS)
[    0.105951] devtmpfs: initialized
[    0.105951] x86/mm: Memory block size: 128MB
[    0.105951] PM: Registering ACPI NVS region [mem 0xb96ac000-0xb96b2fff] (28672 bytes)
[    0.105951] PM: Registering ACPI NVS region [mem 0xcd4ec000-0xcd620fff] (1265664 bytes)
[    0.105951] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.105951] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.105951] pinctrl core: initialized pinctrl subsystem
[    0.105951] PM: RTC time: 18:37:28, date: 2020-07-08
[    0.105951] NET: Registered protocol family 16
[    0.105951] audit: initializing netlink subsys (disabled)
[    0.105951] audit: type=2000 audit(1594233448.024:1): state=initialized audit_enabled=0 res=1
[    0.105951] EISA bus registered
[    0.105951] cpuidle: using governor ladder
[    0.105951] cpuidle: using governor menu
[    0.105951] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.105951] ACPI: bus type PCI registered
[    0.105951] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.108478] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.108480] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.108486] PCI: Using configuration type 1 for base access
[    0.108525] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.109719] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.109719] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.109719] ACPI: Added _OSI(Module Device)
[    0.109719] ACPI: Added _OSI(Processor Device)
[    0.109719] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.109719] ACPI: Added _OSI(Processor Aggregator Device)
[    0.109719] ACPI: Added _OSI(Linux-Dell-Video)
[    0.109719] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.109719] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.125704] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.128194] ACPI: Dynamic OEM Table Load:
[    0.128197] ACPI: SSDT 0xFFFF983CD6092C00 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.128938] ACPI: Dynamic OEM Table Load:
[    0.128938] ACPI: SSDT 0xFFFF983CD665B800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.129799] ACPI: Dynamic OEM Table Load:
[    0.129799] ACPI: SSDT 0xFFFF983CD60D6400 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.130271] ACPI: Interpreter enabled
[    0.130298] ACPI: (supports S0 S3 S4 S5)
[    0.130298] ACPI: Using IOAPIC for interrupt routing
[    0.130368] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.131078] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.131723] ACPI: Power Resource [PG00] (on)
[    0.132742] ACPI: Power Resource [PG01] (on)
[    0.132881] ACPI: Power Resource [PG02] (on)
[    0.148139] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.148144] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.148495] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
[    0.148821] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.148821] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.149265] PCI host bridge to bus 0000:00
[    0.149267] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.149268] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.149269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.149269] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.149270] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.149271] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.149272] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.149272] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.149273] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.149274] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.149275] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.149282] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.149366] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.149374] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.149379] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.149382] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.149461] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.149468] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
[    0.149566] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.149583] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[    0.149634] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.149707] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.149725] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3e000-0xf7d3e00f 64bit]
[    0.149779] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.149874] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[    0.149890] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[    0.149896] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3c000-0xf7d3cfff]
[    0.149902] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.149952] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.150028] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.150046] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
[    0.150120] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.150196] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.150212] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[    0.150273] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.150347] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.150416] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.150541] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[    0.150610] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.150732] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.150751] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3a000-0xf7d3a3ff]
[    0.150826] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.150903] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.151065] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.151078] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.151083] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.151089] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.151094] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.151100] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.151105] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d39000-0xf7d397ff]
[    0.151135] pci 0000:00:1f.2: PME# supported from D3hot
[    0.151203] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.151217] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d38000-0xf7d380ff 64bit]
[    0.151234] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.151360] acpiphp: Slot [1] registered
[    0.151363] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.151427] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401
[    0.151586] pci 0000:00:1c.6: PCI bridge to [bus 02-03] (subtractive decode)
[    0.151589] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.151591] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.151595] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.151596] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.151596] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.151597] pci 0000:00:1c.6:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.151598] pci 0000:00:1c.6:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.151598] pci 0000:00:1c.6:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.151599] pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.151600] pci 0000:00:1c.6:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.151601] pci 0000:00:1c.6:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.151601] pci 0000:00:1c.6:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.151626] pci_bus 0000:03: extended config space not accessible
[    0.151647] pci 0000:03:00.0: [1106:3038] type 00 class 0x0c0300
[    0.151723] pci 0000:03:00.0: reg 0x20: [io  0xe020-0xe03f]
[    0.151794] pci 0000:03:00.0: supports D1 D2
[    0.151795] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.151842] pci 0000:03:00.1: [1106:3038] type 00 class 0x0c0300
[    0.151919] pci 0000:03:00.1: reg 0x20: [io  0xe000-0xe01f]
[    0.151991] pci 0000:03:00.1: supports D1 D2
[    0.151992] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
[    0.152035] pci 0000:03:00.2: [1106:3104] type 00 class 0x0c0320
[    0.152060] pci 0000:03:00.2: reg 0x10: [mem 0xf7c00000-0xf7c000ff]
[    0.152182] pci 0000:03:00.2: supports D1 D2
[    0.152183] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot
[    0.152284] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
[    0.152291] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.152295] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.152302] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff] (subtractive decode)
[    0.152303] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[    0.152304] pci 0000:02:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.152304] pci 0000:02:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.152305] pci 0000:02:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.152306] pci 0000:02:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.152306] pci 0000:02:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.152307] pci 0000:02:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.152308] pci 0000:02:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.152309] pci 0000:02:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.152309] pci 0000:02:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.152310] pci 0000:02:00.0:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.153397] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.153451] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.153504] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.153556] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.153608] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.153659] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.153711] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.153763] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.153945] SCSI subsystem initialized
[    0.153945] libata version 3.00 loaded.
[    0.153945] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.153945] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.153945] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.153945] vgaarb: loaded
[    0.153945] ACPI: bus type USB registered
[    0.153945] usbcore: registered new interface driver usbfs
[    0.153945] usbcore: registered new interface driver hub
[    0.153945] usbcore: registered new device driver usb
[    0.153945] pps_core: LinuxPPS API ver. 1 registered
[    0.153945] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.153945] PTP clock support registered
[    0.153945] EDAC MC: Ver: 3.0.0
[    0.153945] PCI: Using ACPI for IRQ routing
[    0.153945] PCI: pci_cache_line_size set to 64 bytes
[    0.153945] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.153945] e820: reserve RAM buffer [mem 0xb96ac000-0xbbffffff]
[    0.153945] e820: reserve RAM buffer [mem 0xba321000-0xbbffffff]
[    0.153945] e820: reserve RAM buffer [mem 0xcd43d000-0xcfffffff]
[    0.153945] e820: reserve RAM buffer [mem 0xcd4ec000-0xcfffffff]
[    0.153945] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.153945] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.153945] NetLabel: Initializing
[    0.153945] NetLabel:  domain hash size = 128
[    0.153945] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.153945] NetLabel:  unlabeled traffic allowed by default
[    0.153945] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.153945] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.156453] clocksource: Switched to clocksource tsc-early
[    0.165689] VFS: Disk quotas dquot_6.6.0
[    0.165700] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.165720] *** VALIDATE hugetlbfs ***
[    0.165781] AppArmor: AppArmor Filesystem Enabled
[    0.165798] pnp: PnP ACPI init
[    0.165925] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.165928] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.166020] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.166023] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166039] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.166071] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.166074] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.166158] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.166160] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166367] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.166369] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166522] pnp 00:06: [dma 0 disabled]
[    0.166556] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.167160] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.167161] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.167162] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.167163] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.167164] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.167165] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.167166] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.167167] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.167168] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.167169] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.167170] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.167172] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.167360] pnp: PnP ACPI: found 8 devices
[    0.168255] thermal_sys: Registered thermal governor 'fair_share'
[    0.168256] thermal_sys: Registered thermal governor 'bang_bang'
[    0.168256] thermal_sys: Registered thermal governor 'step_wise'
[    0.168257] thermal_sys: Registered thermal governor 'user_space'
[    0.168257] thermal_sys: Registered thermal governor 'power_allocator'
[    0.172853] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.172879] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.172888] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.172890] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.172896] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.172906] pci 0000:00:1c.6: PCI bridge to [bus 02-03]
[    0.172908] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.172911] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.172917] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.172918] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.172919] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.172919] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.172920] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.172921] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.172922] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.172922] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.172923] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.172924] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.172925] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.172926] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.172926] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.172927] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.172928] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.172929] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.172929] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.172930] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.172931] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.172931] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.172932] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.172933] pci_bus 0000:02: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.172934] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.172934] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.172935] pci_bus 0000:03: resource 4 [io  0xe000-0xefff]
[    0.172936] pci_bus 0000:03: resource 5 [mem 0xf7c00000-0xf7cfffff]
[    0.172936] pci_bus 0000:03: resource 6 [io  0x0000-0x0cf7 window]
[    0.172937] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.172938] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.172938] pci_bus 0000:03: resource 9 [mem 0x000d0000-0x000d3fff window]
[    0.172939] pci_bus 0000:03: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.172940] pci_bus 0000:03: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.172941] pci_bus 0000:03: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.172941] pci_bus 0000:03: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.172942] pci_bus 0000:03: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.172943] pci_bus 0000:03: resource 15 [mem 0xdf200000-0xfeafffff window]
[    0.173070] NET: Registered protocol family 2
[    0.173190] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.173223] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.173324] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.173383] TCP: Hash tables configured (established 65536 bind 65536)
[    0.173407] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.173424] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.173478] NET: Registered protocol family 1
[    0.173482] NET: Registered protocol family 44
[    0.173489] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.196527] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 22332 usecs
[    0.220523] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 23424 usecs
[    0.220939] PCI: CLS 64 bytes, default 64
[    0.220967] Trying to unpack rootfs image as initramfs...
[    0.913990] Freeing initrd memory: 64264K
[    0.928490] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.928491] software IO TLB: mapped [mem 0xc943d000-0xcd43d000] (64MB)
[    0.928631] check: Scanning for low memory corruption every 60 seconds
[    0.929643] Initialise system trusted keyrings
[    0.929650] Key type blacklist registered
[    0.929672] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.930683] zbud: loaded
[    0.930946] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.931057] fuse: init (API version 7.31)
[    0.931147] Platform Keyring initialized
[    0.935055] Key type asymmetric registered
[    0.935056] Asymmetric key parser 'x509' registered
[    0.935061] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.935087] io scheduler mq-deadline registered
[    0.935314] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[    0.935399] pcieport 0000:00:1c.6: PME: Signaling with IRQ 27
[    0.935450] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.935490] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.935491] vesafb: scrolling: redraw
[    0.935491] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.935501] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000ce3f14fd, using 8128k, total 8128k
[    0.935525] fbcon: Deferring console take-over
[    0.935526] fb0: VESA VGA frame buffer device
[    0.935534] intel_idle: MWAIT substates: 0x42120
[    0.935534] intel_idle: v0.4.1 model 0x3C
[    0.935661] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.935774] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.935779] ACPI: Power Button [PWRB]
[    0.935801] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.935805] ACPI: Sleep Button [SLPB]
[    0.935824] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.935832] ACPI: Power Button [PWRF]
[    0.936097] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.956538] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.957692] Linux agpgart interface v0.103
[    0.958962] loop: module loaded
[    0.959086] libphy: Fixed MDIO Bus: probed
[    0.959087] tun: Universal TUN/TAP device driver, 1.6
[    0.959104] PPP generic driver version 2.4.2
[    0.959126] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.959128] ehci-pci: EHCI PCI platform driver
[    0.959218] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.959222] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.959231] ehci-pci 0000:00:1a.0: debug port 2
[    0.963120] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.963130] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3b000
[    0.976479] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.976516] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    0.976517] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.976518] usb usb1: Product: EHCI Host Controller
[    0.976518] usb usb1: Manufacturer: Linux 5.3.0-62-generic ehci_hcd
[    0.976519] usb usb1: SerialNumber: 0000:00:1a.0
[    0.976664] hub 1-0:1.0: USB hub found
[    0.976668] hub 1-0:1.0: 2 ports detected
[    0.976847] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.976850] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.976858] ehci-pci 0000:00:1d.0: debug port 2
[    0.980757] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.980765] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3a000
[    0.996478] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.996504] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    0.996505] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.996506] usb usb2: Product: EHCI Host Controller
[    0.996507] usb usb2: Manufacturer: Linux 5.3.0-62-generic ehci_hcd
[    0.996507] usb usb2: SerialNumber: 0000:00:1d.0
[    0.996648] hub 2-0:1.0: USB hub found
[    0.996652] hub 2-0:1.0: 2 ports detected
[    0.996807] ehci-pci 0000:03:00.2: EHCI Host Controller
[    0.996810] ehci-pci 0000:03:00.2: new USB bus registered, assigned bus number 3
[    0.996851] ehci-pci 0000:03:00.2: irq 16, io mem 0xf7c00000
[    1.012478] ehci-pci 0000:03:00.2: USB 2.0 started, EHCI 1.00
[    1.012525] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.012526] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.012526] usb usb3: Product: EHCI Host Controller
[    1.012527] usb usb3: Manufacturer: Linux 5.3.0-62-generic ehci_hcd
[    1.012528] usb usb3: SerialNumber: 0000:03:00.2
[    1.012663] hub 3-0:1.0: USB hub found
[    1.012667] hub 3-0:1.0: 4 ports detected
[    1.012746] ehci-platform: EHCI generic platform driver
[    1.012751] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.012753] ohci-pci: OHCI PCI platform driver
[    1.012759] ohci-platform: OHCI generic platform driver
[    1.012763] uhci_hcd: USB Universal Host Controller Interface driver
[    1.012829] uhci_hcd 0000:03:00.0: UHCI Host Controller
[    1.012832] uhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    1.012838] uhci_hcd 0000:03:00.0: detected 2 ports
[    1.012868] uhci_hcd 0000:03:00.0: irq 18, io base 0x0000e020
[    1.012903] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    1.012904] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.012904] usb usb4: Product: UHCI Host Controller
[    1.012905] usb usb4: Manufacturer: Linux 5.3.0-62-generic uhci_hcd
[    1.012906] usb usb4: SerialNumber: 0000:03:00.0
[    1.013040] hub 4-0:1.0: USB hub found
[    1.013043] hub 4-0:1.0: 2 ports detected
[    1.013169] uhci_hcd 0000:03:00.1: UHCI Host Controller
[    1.013171] uhci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 5
[    1.013178] uhci_hcd 0000:03:00.1: detected 2 ports
[    1.013206] uhci_hcd 0000:03:00.1: irq 19, io base 0x0000e000
[    1.013241] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    1.013242] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.013243] usb usb5: Product: UHCI Host Controller
[    1.013243] usb usb5: Manufacturer: Linux 5.3.0-62-generic uhci_hcd
[    1.013244] usb usb5: SerialNumber: 0000:03:00.1
[    1.013380] hub 5-0:1.0: USB hub found
[    1.013383] hub 5-0:1.0: 2 ports detected
[    1.013526] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.013529] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 6
[    1.014572] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    1.014575] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.014685] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.014686] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.014686] usb usb6: Product: xHCI Host Controller
[    1.014687] usb usb6: Manufacturer: Linux 5.3.0-62-generic xhci-hcd
[    1.014688] usb usb6: SerialNumber: 0000:00:14.0
[    1.014834] hub 6-0:1.0: USB hub found
[    1.014849] hub 6-0:1.0: 14 ports detected
[    1.017721] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.017723] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 7
[    1.017725] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.017750] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.017750] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.017751] usb usb7: Product: xHCI Host Controller
[    1.017752] usb usb7: Manufacturer: Linux 5.3.0-62-generic xhci-hcd
[    1.017753] usb usb7: SerialNumber: 0000:00:14.0
[    1.017891] hub 7-0:1.0: USB hub found
[    1.017902] hub 7-0:1.0: 6 ports detected
[    1.019488] i8042: PNP: No PS/2 controller found.
[    1.019540] mousedev: PS/2 mouse device common for all mice
[    1.019671] rtc_cmos 00:02: RTC can wake from S4
[    1.019808] rtc_cmos 00:02: registered as rtc0
[    1.019816] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.019821] i2c /dev entries driver
[    1.019846] device-mapper: uevent: version 1.0.3
[    1.019883] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    1.019895] platform eisa.0: Probing EISA bus 0
[    1.019896] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.019897] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.019898] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.019898] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.019899] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.019900] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.019900] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.019901] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.019902] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.019902] platform eisa.0: EISA: Detected 0 cards
[    1.019906] intel_pstate: Intel P-state driver initializing
[    1.020092] ledtrig-cpu: registered to indicate activity on CPUs
[    1.020270] NET: Registered protocol family 10
[    1.024641] Segment Routing with IPv6
[    1.024654] NET: Registered protocol family 17
[    1.024758] Key type dns_resolver registered
[    1.025087] RAS: Correctable Errors collector initialized.
[    1.025126] microcode: sig=0x306c3, pf=0x2, revision=0x28
[    1.025159] microcode: Microcode Update Driver: v2.2.
[    1.025165] sched_clock: Marking stable (1024910760, 246469)->(1029196715, -4039486)
[    1.025304] registered taskstats version 1
[    1.025309] Loading compiled-in X.509 certificates
[    1.026460] Loaded X.509 cert 'Build time autogenerated kernel key: 5b6b7609e44461836628aa165e1ec77cc1a3cfd6'
[    1.026480] zswap: loaded using pool lzo/zbud
[    1.030474] Key type big_key registered
[    1.032359] Key type encrypted registered
[    1.032361] AppArmor: AppArmor sha1 policy hashing enabled
[    1.032365] ima: No TPM chip found, activating TPM-bypass!
[    1.032368] ima: Allocated hash algorithm: sha1
[    1.032371] No architecture policies found
[    1.032376] evm: Initialising EVM extended attributes:
[    1.032376] evm: security.selinux
[    1.032377] evm: security.SMACK64
[    1.032377] evm: security.SMACK64EXEC
[    1.032377] evm: security.SMACK64TRANSMUTE
[    1.032378] evm: security.SMACK64MMAP
[    1.032378] evm: security.apparmor
[    1.032378] evm: security.ima
[    1.032379] evm: security.capability
[    1.032379] evm: HMAC attrs: 0x1
[    1.032816] PM:   Magic number: 12:98:645
[    1.032904] rtc_cmos 00:02: setting system clock to 2020-07-08T18:37:29 UTC (1594233449)
[    1.033892] Freeing unused decrypted memory: 2040K
[    1.034213] Freeing unused kernel image memory: 2664K
[    1.052530] Write protecting the kernel read-only data: 22528k
[    1.052948] Freeing unused kernel image memory: 2008K
[    1.053112] Freeing unused kernel image memory: 1472K
[    1.060197] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.060197] x86/mm: Checking user space page tables
[    1.067022] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.067023] Run /init as init process
[    1.140506] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.140506] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.140804] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.143510] ahci 0000:00:1f.2: version 3.0
[    1.143640] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2a impl SATA mode
[    1.143642] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.165123] scsi host0: ahci
[    1.165286] scsi host1: ahci
[    1.165387] scsi host2: ahci
[    1.165504] scsi host3: ahci
[    1.165571] scsi host4: ahci
[    1.165625] scsi host5: ahci
[    1.165656] ata1: DUMMY
[    1.165657] ata2: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39180 irq 30
[    1.165658] ata3: DUMMY
[    1.165659] ata4: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39280 irq 30
[    1.165659] ata5: DUMMY
[    1.165660] ata6: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39380 irq 30
[    1.184323] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    1.184323] fb0: switching to inteldrmfb from VESA VGA
[    1.184361] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.184892] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.184892] [drm] Driver supports precise vblank timestamp query.
[    1.185229] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.187511] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[    1.188908] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.189141] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.213586] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.228273] fbcon: i915drmfb (fb0) is primary device
[    1.228274] fbcon: Deferring console take-over
[    1.228275] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    1.282174] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:4b:7a:b7
[    1.282175] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.282202] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    1.282864] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.308476] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.328476] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.348495] usb 6-2: new full-speed USB device number 2 using xhci_hcd
[    1.464790] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[    1.464801] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.465067] hub 1-1:1.0: USB hub found
[    1.465143] hub 1-1:1.0: 6 ports detected
[    1.479225] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.479252] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.479274] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.479927] ata4.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    1.479928] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.480657] ata4.00: configured for UDMA/133
[    1.481267] ata2.00: supports DRM functions and may not be fully accessible
[    1.482152] ata2.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
[    1.482153] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.483068] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.483069] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.483080] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.483388] ata6.00: ATAPI: ATAPI   iHAS124   E, 4L04, max UDMA/100
[    1.484879] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[    1.484880] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.484914] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.484926] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.484927] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.485018] ata2.00: supports DRM functions and may not be fully accessible
[    1.485177] hub 2-1:1.0: USB hub found
[    1.485219] ata6.00: configured for UDMA/100
[    1.485251] hub 2-1:1.0: 8 ports detected
[    1.487843] ata2.00: configured for UDMA/133
[    1.487959] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    1.488191] ata2.00: Enabling discard_zeroes_data
[    1.488216] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.488230] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.488235] sd 1:0:0:0: [sda] Write Protect is off
[    1.488236] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.488251] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.488326] ata2.00: Enabling discard_zeroes_data
[    1.488347] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    1.488436] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.488561] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.488562] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.488569] sd 3:0:0:0: [sdb] Write Protect is off
[    1.488570] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.488596] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.488682]  sda: sda1 sda2 sda3
[    1.488876] ata2.00: Enabling discard_zeroes_data
[    1.489471] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L04 PQ: 0 ANSI: 5
[    1.489966] sd 1:0:0:0: [sda] supports TCG Opal
[    1.489967] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.492462] usb 4-2: new low-speed USB device number 2 using uhci_hcd
[    1.519344]  sdb: sdb1
[    1.519864] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.557981] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.557982] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.558166] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.558229] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.688945] usb 4-2: New USB device found, idVendor=045e, idProduct=07b9, bcdDevice= 1.14
[    1.688956] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.688957] usb 4-2: Product: USB Keyboard
[    1.688958] usb 4-2: Manufacturer: LITEON Technology
[    1.710616] hidraw: raw HID events driver (C) Jiri Kosina
[    1.726036] usbcore: registered new interface driver usbhid
[    1.726037] usbhid: USB HID core driver
[    1.727617] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.0/0003:045E:07B9.0001/input/input4
[    1.784693] hid-generic 0003:045E:07B9.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:03:00.0-2/input0
[    1.932480] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[    1.932483] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[    1.932493] clocksource: Switched to clocksource tsc
[    1.995746] usb 6-2: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
[    1.995747] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.995748] usb 6-2: Product: USB Audio Device
[    1.995749] usb 6-2: Manufacturer: GeneralPlus
[    1.996821] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb6/6-2/6-2:1.3/0003:1B3F:2008.0002/input/input5
[    2.060662] hid-generic 0003:1B3F:2008.0002: input,hidraw1: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:14.0-2/input3
[    2.188476] usb 6-3: new high-speed USB device number 3 using xhci_hcd
[    4.575188] usb 6-3: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
[    4.575189] usb 6-3: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[    4.575190] usb 6-3: Product: HD Pro Webcam C920
[    4.575190] usb 6-3: SerialNumber: CBD3F97F
[    4.700475] usb 6-4: new full-speed USB device number 4 using xhci_hcd
[    4.852182] usb 6-4: New USB device found, idVendor=056a, idProduct=0302, bcdDevice= 1.00
[    4.852183] usb 6-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.852184] usb 6-4: Product: Intuos PTS
[    4.852184] usb 6-4: Manufacturer: Wacom Co.,Ltd.
[    4.856846] hid-generic 0003:056A:0302.0003: hiddev0,hidraw2: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:14.0-4/input0
[    4.857858] hid-generic 0003:056A:0302.0004: hiddev1,hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:14.0-4/input1
[    4.858952] input: Wacom Co.,Ltd. Intuos PTS as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.2/0003:056A:0302.0005/input/input6
[    4.859096] hid-generic 0003:056A:0302.0005: input,hidraw4: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:14.0-4/input2
[    4.984477] usb 6-13: new low-speed USB device number 5 using xhci_hcd
[    5.135834] usb 6-13: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    5.135835] usb 6-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.135836] usb 6-13: Product: USB Optical Mouse
[    5.135837] usb 6-13: Manufacturer: Logitech
[    5.137959] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb6/6-13/6-13:1.0/0003:046D:C077.0006/input/input7
[    5.138235] hid-generic 0003:046D:C077.0006: input,hidraw5: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-13/input0
[    5.142855] input: Wacom Intuos PT S Pen as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.0/0003:056A:0302.0003/input/input8
[    5.142988] wacom 0003:056A:0302.0003: hidraw2: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:14.0-4/input0
[    5.143135] input: Wacom Intuos PT S Finger as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.1/0003:056A:0302.0004/input/input12
[    5.143250] input: Wacom Intuos PT S Pad as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.1/0003:056A:0302.0004/input/input13
[    5.143319] wacom 0003:056A:0302.0004: hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:00:14.0-4/input1
[    5.381590] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.492505] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.512597] systemd[1]: Detected architecture x86-64.
[    5.513741] systemd[1]: Set hostname to <bob-desktop>.
[    5.594933] systemd[1]: Created slice User and Session Slice.
[    5.594969] systemd[1]: Reached target User and Group Name Lookups.
[    5.595005] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.595122] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.595137] systemd[1]: Reached target Remote File Systems.
[    5.595231] systemd[1]: Created slice System Slice.
[    5.595270] systemd[1]: Listening on udev Kernel Socket.
[    5.607958] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.619256] lp: driver loaded but no devices found
[    5.622787] ppdev: user-space parallel port driver
[    5.678424] systemd-journald[453]: Received request to flush runtime journal from PID 1
[    5.910737] mc: Linux media interface: v0.10
[    5.916059] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.919407] videodev: Linux video capture interface: v2.00
[    5.929132] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    5.929165] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    5.929197] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    5.929237] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    5.929268] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    5.941088] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.941089] snd_hda_codec_realtek hdaudioC2D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.941090] snd_hda_codec_realtek hdaudioC2D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.941091] snd_hda_codec_realtek hdaudioC2D0:    mono: mono_out=0x0
[    5.941091] snd_hda_codec_realtek hdaudioC2D0:    dig-out=0x1e/0x0
[    5.941092] snd_hda_codec_realtek hdaudioC2D0:    inputs:
[    5.941093] snd_hda_codec_realtek hdaudioC2D0:      Front Mic=0x19
[    5.941094] snd_hda_codec_realtek hdaudioC2D0:      Rear Mic=0x18
[    5.941094] snd_hda_codec_realtek hdaudioC2D0:      Line=0x1a
[    5.964989] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190703/utaddress-213)
[    5.964995] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.965001] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)
[    5.965004] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.965008] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190703/utaddress-213)
[    5.965010] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)
[    5.965013] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.965017] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190703/utaddress-213)
[    5.965018] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)
[    5.965021] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.965021] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.965025] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input19
[    5.965066] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card2/input20
[    5.965096] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card2/input21
[    5.965127] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card2/input22
[    5.965154] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card2/input23
[    5.965182] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card2/input24
[    5.965207] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card2/input25
[    5.965233] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card2/input26
[    6.029476] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    6.029477] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    6.029478] RAPL PMU: hw unit of domain package 2^-14 Joules
[    6.029478] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    6.029478] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    6.036463] cryptd: max_cpu_qlen set to 1000
[    6.066305] AVX2 version of gcm_enc/dec engaged.
[    6.066306] AES CTR mode by8 optimization enabled
[    6.108313] usbcore: registered new interface driver snd-usb-audio
[    6.108429] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
[    6.110321] uvcvideo 6-3:1.0: Entity type for entity Processing 3 was not initialized!
[    6.110323] uvcvideo 6-3:1.0: Entity type for entity Extension 6 was not initialized!
[    6.110323] uvcvideo 6-3:1.0: Entity type for entity Extension 12 was not initialized!
[    6.110324] uvcvideo 6-3:1.0: Entity type for entity Camera 1 was not initialized!
[    6.110325] uvcvideo 6-3:1.0: Entity type for entity Extension 8 was not initialized!
[    6.110326] uvcvideo 6-3:1.0: Entity type for entity Extension 9 was not initialized!
[    6.110326] uvcvideo 6-3:1.0: Entity type for entity Extension 10 was not initialized!
[    6.110327] uvcvideo 6-3:1.0: Entity type for entity Extension 11 was not initialized!
[    6.110369] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb6/6-3/6-3:1.0/input/input27
[    6.110713] usbcore: registered new interface driver uvcvideo
[    6.110714] USB Video Class driver (1.1.1)
[    6.256618] Adding 3383292k swap on /dev/sda3.  Priority:-2 extents:1 across:3383292k SSFS
[    6.268183] intel_rapl_common: Found RAPL domain package
[    6.268184] intel_rapl_common: Found RAPL domain core
[    6.268185] intel_rapl_common: Found RAPL domain uncore
[    6.268185] intel_rapl_common: Found RAPL domain dram
[    6.342178] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.410998] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    6.505650] audit: type=1400 audit(1594233454.967:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=998 comm="apparmor_parser"
[    6.505865] audit: type=1400 audit(1594233454.967:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=997 comm="apparmor_parser"
[    6.505867] audit: type=1400 audit(1594233454.967:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=997 comm="apparmor_parser"
[    6.505878] audit: type=1400 audit(1594233454.967:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=997 comm="apparmor_parser"
[    6.509127] audit: type=1400 audit(1594233454.971:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=999 comm="apparmor_parser"
[    6.511194] audit: type=1400 audit(1594233454.971:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1001 comm="apparmor_parser"
[    6.513506] audit: type=1400 audit(1594233454.975:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=994 comm="apparmor_parser"
[    6.513508] audit: type=1400 audit(1594233454.975:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=994 comm="apparmor_parser"
[    6.513509] audit: type=1400 audit(1594233454.975:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=994 comm="apparmor_parser"
[    6.513511] audit: type=1400 audit(1594233454.975:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=994 comm="apparmor_parser"
[    6.844031] vboxdrv: loading out-of-tree module taints kernel.
[    6.844161] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    6.849150] vboxdrv: Found 4 processor cores
[    6.868605] vboxdrv: TSC mode is Invariant, tentative frequency 3192591949 Hz
[    6.868606] vboxdrv: Successfully loaded version 6.1.10 (interface 0x002d0001)
[    7.071379] VBoxNetFlt: Successfully started.
[    7.072917] VBoxNetAdp: Successfully started.
[    9.674695] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    9.674725] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   17.908848] usb 6-3: reset high-speed USB device number 3 using xhci_hcd
[   19.628588] rfkill: input handler disabled
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 659
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Επιστροφή στο Λειτουργικό Σύστημα