προβλημα λειτουργίας υλικού με ubuntu 14.04 x64  Το θέμα επιλύθηκε

Εκδόσεις Ubuntu υπό ανάπτυξη (alpha, beta κλπ), δοκιμές (testing) και σφάλματα (bugs).
Eδώ συζητάμε για την εκάστοτε δοκιμαστική έκδοση του Ubuntu.

Συντονιστής: Geochr

Κανόνες Δ. Συζήτησης
Στην ενότητα αυτή συζητάμε θέματα και προβλήματα που αφορούν μόνο τις εκάστοτε υπό ανάπτυξη/δοκιμαστικές εκδόσεις του Ubuntu και των παραγώγων του.
Οι εκδόσεις υπό ανάπτυξη είναι δοκιμαστικές για τους προγραμματιστές και όσους συμμετέχουν στην διαδικασία με διορθώσεις, αναφορές bugs κτλ. Δεν συστήνονται για χρήστες καθώς μπορεί να έχουν αρκετά σφάλματα.
Αν ενδιαφέρεστε για συμμετοχή σε δοκιμές (testing) των υπό ανάπτυξη εκδόσεων του Ubuntu, δείτε πληροφορίες εδώ: https://wiki.ubuntu.com/GreekTeam/QA.

προβλημα λειτουργίας υλικού με ubuntu 14.04 x64

Δημοσίευσηαπό Dimitrios.gr » 13 Μαρ 2014, 10:05

πρόβλημα λειτουργίας υλικού σε AMD 990 chipset + SB 950 με ubuntu 14.04x64.
Δοκίμασα την 14.04 χ64 και έχω ακριβώς το ίδιο πρόβλημα , με την προηγούμενη εκδοσή την 64bit , με τiς θήρες usb και με το δίκτυο που δεν μπορεί να συνδεθεί ,, όπως εδώ
πιθανόν όπως και τώρα , που χρησιμοποιώ την ubuntu X32 να λειτουργεί μονο η 14.04 x32 !!
μάλλον αυτο το πρόβλημα δεν πρόκειται να διορθωθεί :problem:

YΓ: το πρόβλημα στο προηγούμενο θέμα δεν λύθηκε 100% άλλα ένα μέρος του
Τελευταία επεξεργασία από Dimitrios.gr και 14 Μαρ 2014, 00:02, έχει επεξεργασθεί 2 φορά/ες συνολικά
Spoiler: show
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Μέτριο
Λειτουργικό ⇛ Linux x32
Προδιαγραφές ⇛ AMD FX 8350 │4GB │ Audio Realtek ALC889│ TFT 19"
Κάρτα Γραφικών ⇛ NVIDIA gtx 650 TI BOOST

-------------------------------------------------------------------------------------------
Η Εξουσία που αποκτήθηκε παράνομα,ποτέ δεν χρησιμοποιείται για το καλό των ανθρώπων (Τάκιτος)
Όσο ποιο σάπιο είναι ένα κράτος τόσο πληθύνονται οι νόμοι. (Τάκιτος)
πᾶ­σά τε ἐ­πι­στή­μη χω­ρι­ζο­μέ­νη δι­και­ο­σύ­νης καὶ τῆς ἄλ­λης ἀ­ρε­τῆς πα­νουρ­γί­α, οὐ σο­φί­α φα­ί­νε­ται .(Πλάτων)
Dimitrios.gr
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 880
Εγγραφή: 09 Ιούλ 2011, 19:17
Εκτύπωση

Re: ubuntu 14.04

Δημοσίευσηαπό konnn » 13 Μαρ 2014, 10:35

Μεταφέρθηκε στην κατάλληλη ενότητα

1 Linux: Μέτριος ┃ Προγραμματισμός: Μέτριος ┃ Αγγλικά: Προχωρημένος
2 Desktop : Ubuntu 16.04 64bit
a Intel Core i3 CPU 530 2.93GHz ‖ RAM 3824 MiB ‖ Intel DH55HC -
b nVidia Device [10de:1040] (rev a1)
c eth0: Intel 82578DC Gigabit Network Connection
3 Notebook : Ubuntu 16.04 64 bit
a Intel Core i3-2365M CPU @ 1.40GHz ‖ RAM 3854 MiB ‖ LENOVO 20197
b Intel 2nd Generation Core Processor Family Integrated Graphics Controller
c 5 wlan0: Intel Centrino Wireless-N 2230 ⋮ eth0: Realtek RTL8101E/RTL8102E

Αυτόματη υπογραφή.
Άβαταρ μέλους
konnn
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 3566
Εγγραφή: 12 Ιούλ 2010, 17:54
Τοποθεσία: Καλαμάτα
Launchpad: konnn
Εκτύπωση

Re: ubuntu 14.04

Δημοσίευσηαπό Geochr » 13 Μαρ 2014, 15:06

@Dimitrios.gr Κάτι που μπορείς να κάνει, είνια να αναζητήσεις για κάποιο ανοιχτό bug ή αν δεν υπάρχει, μπορείς να ανοίξεις εσύ ένα!

Επίσης άλλαξε τον τίτλο του θέματος σε κάτι που να περιγράφει το πρόβλημά σου.
Γνώσεις ⇛Linux: Μαθαίνω αργά ┃ Προγραμματισμός: Ελάχιστο ┃ Αγγλικά: Μέτρια

  • Λειτουργικό ⇛ Ubuntu 16,04LTS
    ⇛Intel Core i3-2365M CPU @1.40GHz ‖ RAM 7780 MB ‖ Acer Aspire V5-571
Άβαταρ μέλους
Geochr
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 2466
Εγγραφή: 27 Νοέμ 2010, 01:39
Τοποθεσία: Περιστέρι - Αίγινα
Launchpad: geochr
IRC: Geochr
Εκτύπωση

Re: προβλημα λειτουργίας υλικού με ubuntu 14.04 x64

Δημοσίευσηαπό Dimitrios.gr » 14 Μαρ 2014, 00:12

Geochr έγραψε:@Dimitrios.gr Κάτι που μπορείς να κάνει, είνια να αναζητήσεις για κάποιο ανοιχτό bug ή αν δεν υπάρχει, μπορείς να ανοίξεις εσύ ένα!

.

Δεν ξέρω αν οφείλεται σε κάποιο bug ή εαν δεν μπορεί το ubuntu απλά να ρυθμίσει σωστά το υλικό με το υπάρχον bios , η εαν δεν υπάρχει κάποιο "ηθικό παράπτωμα" κατα το stallman με το bios της μητρικής που να οφείλεται στους κατασκευαστές του....
Spoiler: show
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Μέτριο
Λειτουργικό ⇛ Linux x32
Προδιαγραφές ⇛ AMD FX 8350 │4GB │ Audio Realtek ALC889│ TFT 19"
Κάρτα Γραφικών ⇛ NVIDIA gtx 650 TI BOOST

-------------------------------------------------------------------------------------------
Η Εξουσία που αποκτήθηκε παράνομα,ποτέ δεν χρησιμοποιείται για το καλό των ανθρώπων (Τάκιτος)
Όσο ποιο σάπιο είναι ένα κράτος τόσο πληθύνονται οι νόμοι. (Τάκιτος)
πᾶ­σά τε ἐ­πι­στή­μη χω­ρι­ζο­μέ­νη δι­και­ο­σύ­νης καὶ τῆς ἄλ­λης ἀ­ρε­τῆς πα­νουρ­γί­α, οὐ σο­φί­α φα­ί­νε­ται .(Πλάτων)
Dimitrios.gr
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 880
Εγγραφή: 09 Ιούλ 2011, 19:17
Εκτύπωση

Re: προβλημα λειτουργίας υλικού με ubuntu 14.04 x64

Δημοσίευσηαπό the_eye » 15 Μαρ 2014, 03:25

Για δώσε μας τα παρακάτω
Κώδικας: Επιλογή όλων
dmesg
lspci
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 4.15.0-42-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11455
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: προβλημα λειτουργίας υλικού με ubuntu 14.04 x64

Δημοσίευσηαπό Dimitrios.gr » 15 Μαρ 2014, 17:03

the_eye έγραψε:Για δώσε μας τα παρακάτω
Κώδικας: Επιλογή όλων
dmesg
lspci

τα δεδομμένα είναι απο το ubuntu to οποίο χρησιμοποιώ ubuntu 12,04 x32
dmesg
Κώδικας: Επιλογή όλων
[    0.271393] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.271395] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.271396] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.271399] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.271401] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.271403] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.271404] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.271406] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.271408] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[    0.271410] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[    0.271412] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.271494] system 00:02: [io  0x0220-0x0227] has been reserved
[    0.271496] system 00:02: [io  0x0228-0x0237] has been reserved
[    0.271498] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.271500] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.271688] pnp 00:03: [dma 0 disabled]
[    0.271720] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.271727] pnp 00:04: [dma 4]
[    0.271738] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.271756] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.271770] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.271807] system 00:07: [io  0x04d0-0x04d1] has been reserved
[    0.271809] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.271826] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.271851] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.271937] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.272015] system 00:0b: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.272017] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.272111] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.272114] pnp: PnP ACPI: found 13 devices
[    0.272114] ACPI: ACPI bus type pnp unregistered
[    0.272116] PnPBIOS: Disabled by ACPI PNP
[    0.308129] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.308132] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.308135] pci 0000:00:02.0:   bridge window [mem 0xfd000000-0xfe0fffff]
[    0.308137] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.308140] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.308142] pci 0000:00:04.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.308145] pci 0000:00:09.0: PCI bridge to [bus 03]
[    0.308147] pci 0000:00:09.0:   bridge window [io  0xd000-0xdfff]
[    0.308150] pci 0000:00:09.0:   bridge window [mem 0xda100000-0xda1fffff 64bit pref]
[    0.308153] pci 0000:00:0a.0: PCI bridge to [bus 04]
[    0.308155] pci 0000:00:0a.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.308159] pci 0000:00:14.4: PCI bridge to [bus 05]
[    0.308161] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
[    0.308165] pci 0000:00:14.4:   bridge window [mem 0xfe100000-0xfe1fffff]
[    0.308190] pci_bus 0000:00: resource 4 [io  0x0000-0x03af]
[    0.308192] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7]
[    0.308193] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df]
[    0.308195] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff]
[    0.308196] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[    0.308198] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[    0.308199] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[    0.308201] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.308202] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfe0fffff]
[    0.308204] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd9ffffff 64bit pref]
[    0.308205] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfe3fffff]
[    0.308207] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.308208] pci_bus 0000:03: resource 2 [mem 0xda100000-0xda1fffff 64bit pref]
[    0.308210] pci_bus 0000:04: resource 1 [mem 0xfe200000-0xfe2fffff]
[    0.308212] pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
[    0.308213] pci_bus 0000:05: resource 1 [mem 0xfe100000-0xfe1fffff]
[    0.308215] pci_bus 0000:05: resource 4 [io  0x0000-0x03af]
[    0.308216] pci_bus 0000:05: resource 5 [io  0x03e0-0x0cf7]
[    0.308217] pci_bus 0000:05: resource 6 [io  0x03b0-0x03df]
[    0.308219] pci_bus 0000:05: resource 7 [io  0x0d00-0xffff]
[    0.308220] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff]
[    0.308222] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff]
[    0.308223] pci_bus 0000:05: resource 10 [mem 0xd0000000-0xffffffff]
[    0.308242] NET: Registered protocol family 2
[    0.308323] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.308345] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.308366] TCP: Hash tables configured (established 8192 bind 8192)
[    0.308379] TCP: reno registered
[    0.308381] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.308386] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.308420] NET: Registered protocol family 1
[    0.630347] pci 0000:01:00.0: Boot video device
[    0.630401] PCI: CLS 64 bytes, default 64
[    0.630429] Trying to unpack rootfs image as initramfs...
[    0.935770] Freeing initrd memory: 21984k freed
[    0.940949] LVT offset 1 assigned for vector 0x400
[    0.940959] IBS: LVT offset 1 assigned
[    0.940979] perf: AMD IBS detected (0x0000001f)
[    0.941137] Initialise module verification
[    0.941169] audit: initializing netlink socket (disabled)
[    0.941181] type=2000 audit(1394899119.836:1): initialized
[    0.957655] bounce pool size: 64 pages
[    0.957662] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.958756] VFS: Disk quotas dquot_6.5.2
[    0.958790] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.959157] fuse init (API version 7.20)
[    0.959213] msgmni has been set to 1664
[    0.959652] Key type asymmetric registered
[    0.959653] Asymmetric key parser 'x509' registered
[    0.959675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.959701] io scheduler noop registered
[    0.959702] io scheduler deadline registered (default)
[    0.959706] io scheduler cfq registered
[    0.959846] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.959856] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.959941] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.959945] ACPI: Power Button [PWRB]
[    0.959972] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.959974] ACPI: Power Button [PWRF]
[    0.960023] ACPI: processor limited to max C-state 1
[    0.977952] GHES: HEST is not enabled!
[    0.978007] isapnp: Scanning for PnP cards...
[    0.978022] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.998319] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.999442] Linux agpgart interface v0.103
[    1.000536] brd: module loaded
[    1.001082] loop: module loaded
[    1.001334] libphy: Fixed MDIO Bus: probed
[    1.001376] tun: Universal TUN/TAP device driver, 1.6
[    1.001377] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.001408] PPP generic driver version 2.4.2
[    1.001445] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.001446] ehci-pci: EHCI PCI platform driver
[    1.001465] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.001469] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    1.001477] QUIRK: Enable AMD PLL fix
[    1.001478] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.001487] ehci-pci 0000:00:12.2: debug port 1
[    1.001515] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe409000
[    1.013214] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.013231] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.013233] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.013234] usb usb1: Product: EHCI Host Controller
[    1.013236] usb usb1: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[    1.013237] usb usb1: SerialNumber: 0000:00:12.2
[    1.013315] hub 1-0:1.0: USB hub found
[    1.013318] hub 1-0:1.0: 5 ports detected
[    1.013392] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.013396] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[    1.013399] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.013408] ehci-pci 0000:00:13.2: debug port 1
[    1.013428] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe407000
[    1.025181] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.025196] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.025198] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.025199] usb usb2: Product: EHCI Host Controller
[    1.025201] usb usb2: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[    1.025202] usb usb2: SerialNumber: 0000:00:13.2
[    1.025272] hub 2-0:1.0: USB hub found
[    1.025275] hub 2-0:1.0: 5 ports detected
[    1.025347] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.025350] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[    1.025353] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    1.025362] ehci-pci 0000:00:16.2: debug port 1
[    1.025382] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe404000
[    1.037150] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.037164] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.037165] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.037167] usb usb3: Product: EHCI Host Controller
[    1.037168] usb usb3: Manufacturer: Linux 3.8.0-35-generic ehci_hcd
[    1.037169] usb usb3: SerialNumber: 0000:00:16.2
[    1.037239] hub 3-0:1.0: USB hub found
[    1.037241] hub 3-0:1.0: 4 ports detected
[    1.037301] ehci-platform: EHCI generic platform driver
[    1.037306] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.037324] ohci_hcd 0000:00:12.0: OHCI Host Controller
[    1.037328] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[    1.037346] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe40a000
[    1.096985] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.096988] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.096989] usb usb4: Product: OHCI Host Controller
[    1.096991] usb usb4: Manufacturer: Linux 3.8.0-35-generic ohci_hcd
[    1.096992] usb usb4: SerialNumber: 0000:00:12.0
[    1.097074] hub 4-0:1.0: USB hub found
[    1.097078] hub 4-0:1.0: 5 ports detected
[    1.097146] ohci_hcd 0000:00:13.0: OHCI Host Controller
[    1.097149] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[    1.097160] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe408000
[    1.156820] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.156823] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.156824] usb usb5: Product: OHCI Host Controller
[    1.156826] usb usb5: Manufacturer: Linux 3.8.0-35-generic ohci_hcd
[    1.156827] usb usb5: SerialNumber: 0000:00:13.0
[    1.156907] hub 5-0:1.0: USB hub found
[    1.156911] hub 5-0:1.0: 5 ports detected
[    1.156975] ohci_hcd 0000:00:14.5: OHCI Host Controller
[    1.156978] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[    1.156989] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe406000
[    1.216658] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.216661] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.216662] usb usb6: Product: OHCI Host Controller
[    1.216663] usb usb6: Manufacturer: Linux 3.8.0-35-generic ohci_hcd
[    1.216665] usb usb6: SerialNumber: 0000:00:14.5
[    1.216745] hub 6-0:1.0: USB hub found
[    1.216749] hub 6-0:1.0: 2 ports detected
[    1.216800] ohci_hcd 0000:00:16.0: OHCI Host Controller
[    1.216804] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[    1.216816] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe405000
[    1.276500] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    1.276502] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.276504] usb usb7: Product: OHCI Host Controller
[    1.276505] usb usb7: Manufacturer: Linux 3.8.0-35-generic ohci_hcd
[    1.276506] usb usb7: SerialNumber: 0000:00:16.0
[    1.276586] hub 7-0:1.0: USB hub found
[    1.276590] hub 7-0:1.0: 4 ports detected
[    1.276649] uhci_hcd: USB Universal Host Controller Interface driver
[    1.276681] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.276684] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[    1.276788] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[    1.276824] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    1.276825] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.276826] usb usb8: Product: xHCI Host Controller
[    1.276828] usb usb8: Manufacturer: Linux 3.8.0-35-generic xhci_hcd
[    1.276829] usb usb8: SerialNumber: 0000:02:00.0
[    1.276876] xHCI xhci_add_endpoint called for root hub
[    1.276877] xHCI xhci_check_bandwidth called for root hub
[    1.276889] hub 8-0:1.0: USB hub found
[    1.276893] hub 8-0:1.0: 2 ports detected
[    1.276932] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    1.276935] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[    1.276949] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    1.276950] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.276952] usb usb9: Product: xHCI Host Controller
[    1.276953] usb usb9: Manufacturer: Linux 3.8.0-35-generic xhci_hcd
[    1.276954] usb usb9: SerialNumber: 0000:02:00.0
[    1.276997] xHCI xhci_add_endpoint called for root hub
[    1.276998] xHCI xhci_check_bandwidth called for root hub
[    1.277009] hub 9-0:1.0: USB hub found
[    1.277013] hub 9-0:1.0: 2 ports detected
[    1.330311] isapnp: No Plug & Play device found
[    1.340413] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.340418] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[    1.340518] xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
[    1.340557] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    1.340559] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.340560] usb usb10: Product: xHCI Host Controller
[    1.340562] usb usb10: Manufacturer: Linux 3.8.0-35-generic xhci_hcd
[    1.340563] usb usb10: SerialNumber: 0000:04:00.0
[    1.340635] xHCI xhci_add_endpoint called for root hub
[    1.340636] xHCI xhci_check_bandwidth called for root hub
[    1.340651] hub 10-0:1.0: USB hub found
[    1.340655] hub 10-0:1.0: 2 ports detected
[    1.340700] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    1.340703] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[    1.340717] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    1.340719] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.340720] usb usb11: Product: xHCI Host Controller
[    1.340722] usb usb11: Manufacturer: Linux 3.8.0-35-generic xhci_hcd
[    1.340723] usb usb11: SerialNumber: 0000:04:00.0
[    1.340770] xHCI xhci_add_endpoint called for root hub
[    1.340772] xHCI xhci_check_bandwidth called for root hub
[    1.340784] hub 11-0:1.0: USB hub found
[    1.340788] hub 11-0:1.0: 2 ports detected
[    1.340901] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    1.341255] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.341259] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.341339] mousedev: PS/2 mouse device common for all mice
[    1.341435] rtc_cmos 00:05: RTC can wake from S4
[    1.341513] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    1.341531] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.341587] device-mapper: uevent: version 1.0.3
[    1.341628] device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
[    1.341641] EISA: Probing bus 0 at eisa.0
[    1.341643] EISA: Cannot allocate resource for mainboard
[    1.341644] Cannot allocate resource for EISA slot 1
[    1.341645] Cannot allocate resource for EISA slot 2
[    1.341646] Cannot allocate resource for EISA slot 3
[    1.341647] Cannot allocate resource for EISA slot 4
[    1.341647] Cannot allocate resource for EISA slot 5
[    1.341648] Cannot allocate resource for EISA slot 6
[    1.341649] Cannot allocate resource for EISA slot 7
[    1.341650] Cannot allocate resource for EISA slot 8
[    1.341651] EISA: Detected 0 cards.
[    1.341657] cpufreq-nforce2: No nForce2 chipset.
[    1.341659] cpuidle: using governor ladder
[    1.341660] cpuidle: using governor menu
[    1.341662] ledtrig-cpu: registered to indicate activity on CPUs
[    1.341664] EFI Variables Facility v0.08 2004-May-17
[    1.341814] ashmem: initialized
[    1.341894] TCP: cubic registered
[    1.341956] NET: Registered protocol family 10
[    1.342067] NET: Registered protocol family 17
[    1.342074] Key type dns_resolver registered
[    1.342213] Using IPI No-Shortcut mode
[    1.342280] Loading module verification certificates
[    1.344892] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 660f9c80ebcd654fda7d1cfd5df1ea2daebcada3'
[    1.344898] registered taskstats version 1
[    1.346521] Key type trusted registered
[    1.347717] Key type encrypted registered
[    1.349333] rtc_cmos 00:05: setting system clock to 2014-03-15 15:58:41 UTC (1394899121)
[    1.349364] powernow-k8: this CPU is not supported anymore, using acpi-cpufreq instead.
[    1.350025] acpi-cpufreq: overriding BIOS provided _PSD data
[    1.350135] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.350137] EDD information not available.
[    1.350256] Freeing unused kernel memory: 796k freed
[    1.350437] Write protecting the kernel text: 6368k
[    1.350481] Write protecting the kernel read-only data: 2548k
[    1.350482] NX-protecting the kernel data: 5920k
[    1.363027] udevd[110]: starting version 175
[    1.373667] Disabling lock debugging due to kernel taint
[    1.373985] wmi: Mapper loaded
[    1.375679] [drm] Initialized drm 1.1.0 20060810
[    1.376804] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.377002] r8169 0000:03:00.0: irq 74 for MSI/MSI-X
[    1.377138] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xf840e000, 94:de:80:78:2a:2d, XID 0c900800 IRQ 74
[    1.377140] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.380925] ahci 0000:00:11.0: version 3.0
[    1.381038] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    1.381041] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    1.383548] scsi0 : ahci
[    1.384964] scsi1 : ahci
[    1.385588] scsi2 : ahci
[    1.386849] MXM: GUID detected in BIOS
[    1.387492] scsi3 : ahci
[    1.387609] scsi4 : ahci
[    1.387662] scsi5 : ahci
[    1.387713] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[    1.387716] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[    1.387718] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[    1.387720] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[    1.387722] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19
[    1.387724] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b380 irq 19
[    1.388389] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e6020a1
[    1.388392] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK106 (NVE6)
[    1.388394] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[    1.389341] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    1.389346] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    1.389348] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    1.452121] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    1.501382] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    1.501384] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[    1.501506] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    1.501508] nouveau  [   VBIOS][0000:01:00.0] version 80.06.59.00.1a
[    1.501805] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[    1.501808] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[    1.501809] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    1.540950] [TTM] Zone  kernel: Available graphics memory: 426396 kiB
[    1.540951] [TTM] Zone highmem: Available graphics memory: 2055144 kiB
[    1.540952] [TTM] Initializing pool allocator
[    1.540955] [TTM] Initializing DMA pool allocator
[    1.540963] mtrr: base or size exceeds the MTRR width
[    1.540964] nouveau  [     DRM] VRAM: 2048 MiB
[    1.540965] nouveau  [     DRM] GART: 512 MiB
[    1.540968] nouveau  [     DRM] BIT BIOS found
[    1.540970] nouveau  [     DRM] Bios version 80.06.59.00
[    1.540972] nouveau  [     DRM] TMDS table version 2.0
[    1.540974] nouveau  [     DRM] DCB version 4.0
[    1.540976] nouveau  [     DRM] DCB outp 00: 02000f00 00000000
[    1.540977] nouveau  [     DRM] DCB outp 01: 01000f02 00020030
[    1.540979] nouveau  [     DRM] DCB outp 03: 02011f62 00020010
[    1.540980] nouveau  [     DRM] DCB outp 04: 04822fb6 0f420010
[    1.540982] nouveau  [     DRM] DCB outp 05: 04022f72 00020010
[    1.540983] nouveau  [     DRM] DCB outp 06: 08033f82 00020030
[    1.540985] nouveau  [     DRM] DCB conn 00: 00001030
[    1.540986] nouveau  [     DRM] DCB conn 01: 00010161
[    1.540988] nouveau  [     DRM] DCB conn 02: 00020246
[    1.540989] nouveau  [     DRM] DCB conn 03: 01000331
[    1.542055] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.542056] [drm] No driver support for vblank timestamp query.
[    1.575076] nouveau W[     DRM] voltage table 0x50 unknown
[    1.575287] nouveau  [     DRM] 4 available performance level(s)
[    1.575290] nouveau  [     DRM] 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV
[    1.575292] nouveau  [     DRM] 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV
[    1.575294] nouveau  [     DRM] 2: core 1502MHz shader 3004MHz memory 1080MHz voltage 60mV
[    1.575296] nouveau  [     DRM] 3: core 1502MHz shader 3004MHz memory 1080MHz voltage 40mV
[    1.575297] nouveau  [     DRM] c: fanspeed 100%
[    1.621876] nouveau  [     DRM] MM: using COPY for buffer copies
[    1.703409] ata2: SATA link down (SStatus 0 SControl 300)
[    1.707423] ata3: SATA link down (SStatus 0 SControl 300)
[    1.715349] ata5: SATA link down (SStatus 0 SControl 300)
[    1.719329] ata6: SATA link down (SStatus 0 SControl 300)
[    1.762639] nouveau  [     DRM] allocated 1280x1024 fb: 0x80000, bo f67da200
[    1.762703] fbcon: nouveaufb (fb0) is primary device
[    1.799975] Console: switching to colour frame buffer device 160x64
[    1.800984] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    1.800985] nouveau 0000:01:00.0: registered panic notifier
[    1.800988] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0
[    1.878935] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.880593] ata4.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
[    1.882531] ata4.00: configured for UDMA/100
[    1.934765] tsc: Refined TSC clocksource calibration: 3415.596 MHz
[    1.934774] Switching to clocksource tsc
[    1.942738] usb 7-1: new low-speed USB device number 2 using ohci_hcd
[    1.950781] firewire_core 0000:05:0e.0: created device fw0: GUID 0049e550e5d20b00, S400
[    2.119323] usb 7-1: New USB device found, idVendor=06a3, idProduct=0728
[    2.119325] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.119327] usb 7-1: Product: Saitek Cyborg Keyboard
[    2.119329] usb 7-1: Manufacturer: Chicony
[    2.138273] usbcore: registered new interface driver usbhid
[    2.138275] usbhid: USB HID core driver
[    2.139590] input: Chicony Saitek Cyborg Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/input/input2
[    2.139649] hid-generic 0003:06A3:0728.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Cyborg Keyboard] on usb-0000:00:16.0-1/input0
[    2.142252] input: Chicony Saitek Cyborg Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.1/input/input3
[    2.142343] hid-generic 0003:06A3:0728.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony Saitek Cyborg Keyboard] on usb-0000:00:16.0-1/input1
[    2.253904] usb 7-2: new full-speed USB device number 3 using ohci_hcd
[    2.426498] usb 7-2: New USB device found, idVendor=045e, idProduct=0724
[    2.426501] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.426502] usb 7-2: Product: SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse
[    2.426504] usb 7-2: Manufacturer: Microsoft
[    2.440881] input: Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse as /devices/pci0000:00/0000:00:16.0/usb7/7-2/7-2:1.0/input/input4
[    2.440973] hid-generic 0003:045E:0724.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse] on usb-0000:00:16.0-2/input0
[    2.600987] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.601604] ata1.00: ATA-7: Maxtor 6Y120M0, YAR51EW0, max UDMA/133
[    2.601607] ata1.00: 240121728 sectors, multi 0: LBA
[    2.602295] ata1.00: configured for UDMA/133
[    2.602418] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y120M0   YAR5 PQ: 0 ANSI: 5
[    2.602513] sd 0:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
[    2.602537] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.602564] sd 0:0:0:0: [sda] Write Protect is off
[    2.602568] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.602635] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.603817] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-5260S  1.00 PQ: 0 ANSI: 5
[    2.605864] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[    2.605867] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.605963] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.606020] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.685799]  sda: sda1 sda4 < sda5 sda6 sda7 >
[    2.686176] sd 0:0:0:0: [sda] Attached SCSI disk
[    9.130333] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   10.539274] init: ureadahead main process (340) terminated with status 5
[   10.711753] nouveau E[  PGRAPH][0000:01:00.0] ROP0 ch 1 [0x000027fc92] 0x80000000 0x80000001
[   10.711760] nouveau E[  PGRAPH][0000:01:00.0] ROP1 ch 1 [0x000027fc92] 0x80000000 0x80000001
[   10.711765] nouveau E[  PGRAPH][0000:01:00.0] ROP2 ch 1 [0x000027fc92] 0x80000000 0x80000001
[   13.232950] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   13.483816] udevd[413]: starting version 175
[   14.234152] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   15.513331] lp: driver loaded but no devices found
[   15.795776] init: Failed to spawn binfmt-support main process: unable to execute: No such file or directory
[   18.088883] microcode: CPU0: patch_level=0x010000c8
[   18.228522] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   18.686643] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   18.686700] sp5100_tco: PCI Revision ID: 0x42
[   18.686731] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[   18.686741] sp5100_tco: Last reboot was not triggered by watchdog.
[   18.686950] sp5100_tco: initialized (0xf848ab00). heartbeat=60 sec (nowayout=0)
[   19.107221] microcode: CPU1: patch_level=0x010000c8
[   19.107238] microcode: CPU2: patch_level=0x010000c8
[   19.107247] microcode: CPU3: patch_level=0x010000c8
[   19.107292] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   19.577597] kvm: Nested Virtualization enabled
[   19.577600] kvm: Nested Paging enabled
[   20.291132] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   20.291210] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   20.291285] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   20.291350] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   20.291409] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   20.291459] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
[   20.291507] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
[   20.291557] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
[   20.291770] hda_intel: Disabling MSI
[   20.291777] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   20.963844] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[   20.963912] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[   20.963980] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[   20.964030] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[   21.037756] type=1400 audit(1394899141.238:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=781 comm="apparmor_parser"
[   21.037768] type=1400 audit(1394899141.238:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=780 comm="apparmor_parser"
[   21.038061] type=1400 audit(1394899141.238:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=781 comm="apparmor_parser"
[   21.038078] type=1400 audit(1394899141.238:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=780 comm="apparmor_parser"
[   21.038253] type=1400 audit(1394899141.238:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=781 comm="apparmor_parser"
[   21.038258] type=1400 audit(1394899141.238:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=780 comm="apparmor_parser"
[   22.390819] init: failsafe main process (857) killed by TERM signal
[   22.650143] ppdev: user-space parallel port driver
[   23.453562] Bluetooth: Core ver 2.16
[   23.453585] NET: Registered protocol family 31
[   23.453587] Bluetooth: HCI device and connection manager initialized
[   23.453593] Bluetooth: HCI socket layer initialized
[   23.453594] Bluetooth: L2CAP socket layer initialized
[   23.453598] Bluetooth: SCO socket layer initialized
[   23.619378] Bluetooth: RFCOMM TTY layer initialized
[   23.619385] Bluetooth: RFCOMM socket layer initialized
[   23.619387] Bluetooth: RFCOMM ver 1.11
[   23.773648] type=1400 audit(1394899143.982:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=927 comm="apparmor_parser"
[   23.774005] type=1400 audit(1394899143.982:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=927 comm="apparmor_parser"
[   23.887614] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   23.887616] Bluetooth: BNEP filters: protocol multicast
[   23.887621] Bluetooth: BNEP socket layer initialized
[   24.739177] type=1400 audit(1394899144.950:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=981 comm="apparmor_parser"
[   24.739494] type=1400 audit(1394899144.950:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=981 comm="apparmor_parser"
[   26.584433] audit_printk_skb: 24 callbacks suppressed
[   26.584437] type=1400 audit(1394899146.798:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=982 comm="apparmor_parser"
[   26.588093] type=1400 audit(1394899146.802:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=982 comm="apparmor_parser"
[   26.588823] type=1400 audit(1394899146.806:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=982 comm="apparmor_parser"
[   26.589454] type=1400 audit(1394899146.806:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=982 comm="apparmor_parser"
[   26.591443] type=1400 audit(1394899146.806:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=982 comm="apparmor_parser"
[   26.592058] type=1400 audit(1394899146.806:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=982 comm="apparmor_parser"
[   26.592494] type=1400 audit(1394899146.806:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=982 comm="apparmor_parser"
[   26.593954] type=1400 audit(1394899146.810:27): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=982 comm="apparmor_parser"
[   30.472278] r8169 0000:03:00.0 eth0: link down
[   30.472320] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   30.472528] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   62.003622] r8169 0000:03:00.0 eth0: link up
[   62.003630] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready



lspci
Κώδικας: Επιλογή όλων
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 650 Ti Boost] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
05:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)
Spoiler: show
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Μέτριο
Λειτουργικό ⇛ Linux x32
Προδιαγραφές ⇛ AMD FX 8350 │4GB │ Audio Realtek ALC889│ TFT 19"
Κάρτα Γραφικών ⇛ NVIDIA gtx 650 TI BOOST

-------------------------------------------------------------------------------------------
Η Εξουσία που αποκτήθηκε παράνομα,ποτέ δεν χρησιμοποιείται για το καλό των ανθρώπων (Τάκιτος)
Όσο ποιο σάπιο είναι ένα κράτος τόσο πληθύνονται οι νόμοι. (Τάκιτος)
πᾶ­σά τε ἐ­πι­στή­μη χω­ρι­ζο­μέ­νη δι­και­ο­σύ­νης καὶ τῆς ἄλ­λης ἀ­ρε­τῆς πα­νουρ­γί­α, οὐ σο­φί­α φα­ί­νε­ται .(Πλάτων)
Dimitrios.gr
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 880
Εγγραφή: 09 Ιούλ 2011, 19:17
Εκτύπωση

Re: προβλημα λειτουργίας υλικού με ubuntu 14.04 x64

Δημοσίευσηαπό the_eye » 16 Μαρ 2014, 15:45

Μας ενδιαφέρουν από την έκδοση που υπάρχει το πρόβλημα. Βάλε ένα livecd της 12.04 χ64 ή 14.04 χ64 και δώσε μας πάλι το αποτέλεσμα.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 4.15.0-42-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11455
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: προβλημα λειτουργίας υλικού με ubuntu 14.04 x64

Δημοσίευσηαπό Dimitrios.gr » 16 Μαρ 2014, 18:37

the_eye έγραψε:Μας ενδιαφέρουν από την έκδοση που υπάρχει το πρόβλημα. Βάλε ένα livecd της 12.04 χ64 ή 14.04 χ64 και δώσε μας πάλι το αποτέλεσμα.


ubuntu 14.04 64

dmesg
Κώδικας: Επιλογή όλων
[    3.550637] usb usb9: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    3.550638] usb usb9: SerialNumber: 0000:02:00.0
[    3.550683] xHCI xhci_add_endpoint called for root hub
[    3.550684] xHCI xhci_check_bandwidth called for root hub
[    3.550697] hub 9-0:1.0: USB hub found
[    3.550701] hub 9-0:1.0: 2 ports detected
[    3.558228] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    3.558234] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[    3.558320] xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
[    3.558358] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    3.558359] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.558361] usb usb10: Product: xHCI Host Controller
[    3.558362] usb usb10: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    3.558363] usb usb10: SerialNumber: 0000:04:00.0
[    3.558434] xHCI xhci_add_endpoint called for root hub
[    3.558435] xHCI xhci_check_bandwidth called for root hub
[    3.558449] hub 10-0:1.0: USB hub found
[    3.558454] hub 10-0:1.0: 2 ports detected
[    3.558499] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    3.558501] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[    3.558517] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    3.558519] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.558520] usb usb11: Product: xHCI Host Controller
[    3.558521] usb usb11: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    3.558522] usb usb11: SerialNumber: 0000:04:00.0
[    3.558566] xHCI xhci_add_endpoint called for root hub
[    3.558567] xHCI xhci_check_bandwidth called for root hub
[    3.558579] hub 11-0:1.0: USB hub found
[    3.558583] hub 11-0:1.0: 2 ports detected
[    3.570227] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.570558] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.570561] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.570661] mousedev: PS/2 mouse device common for all mice
[    3.570782] rtc_cmos 00:05: RTC can wake from S4
[    3.570872] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.570892] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.570933] device-mapper: uevent: version 1.0.3
[    3.570978] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    3.571029] cpuidle: using governor ladder
[    3.571030] cpuidle: using governor menu
[    3.571037] ledtrig-cpu: registered to indicate activity on CPUs
[    3.571097] TCP: cubic registered
[    3.571163] NET: Registered protocol family 10
[    3.571297] NET: Registered protocol family 17
[    3.571303] Key type dns_resolver registered
[    3.571546] PM: Hibernation image not present or could not be loaded.
[    3.571548] Loading module verification certificates
[    3.572288] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e20ade5b3af83aaa8563f0ef4119a030c4d3ffdb'
[    3.572296] registered taskstats version 1
[    3.573953] Key type trusted registered
[    3.575216] Key type encrypted registered
[    3.576462] AppArmor: AppArmor sha1 policy hashing enabled
[    3.576697]   Magic number: 6:209:182
[    3.576769] rtc_cmos 00:05: setting system clock to 2014-03-15 14:12:01 UTC (1394892721)
[    3.576858] acpi-cpufreq: overriding BIOS provided _PSD data
[    3.576952] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.576953] EDD information not available.
[    3.578150] Freeing unused kernel memory: 1392K (ffffffff81d0f000 - ffffffff81e6b000)
[    3.578152] Write protecting the kernel read-only data: 12288k
[    3.579597] Freeing unused kernel memory: 672K (ffff880001758000 - ffff880001800000)
[    3.579652] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
[    3.593262] udevd[120]: starting version 175
[    3.612219] ahci 0000:00:11.0: version 3.0
[    3.612405] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    3.612408] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    3.613592] scsi0 : ahci
[    3.615354] scsi1 : ahci
[    3.617461] scsi2 : ahci
[    3.617691] scsi3 : ahci
[    3.617774] scsi4 : ahci
[    3.618266] scsi5 : ahci
[    3.618332] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[    3.618334] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[    3.618337] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[    3.618339] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[    3.618340] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19
[    3.618342] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b380 irq 19
[    3.618634] wmi: Mapper loaded
[    3.618994] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.619004] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.619216] r8169 0000:03:00.0: irq 74 for MSI/MSI-X
[    3.619351] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000064e000, 94:de:80:78:2a:2d, XID 0c900800 IRQ 74
[    3.619353] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.627938] [drm] Initialized drm 1.1.0 20060810
[    3.644517] MXM: GUID detected in BIOS
[    3.644778] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e6020a1
[    3.644782] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK106 (NVE6)
[    3.644783] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[    3.645359] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    3.645365] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.645366] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    3.756607] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    3.756608] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[    3.756713] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    3.756715] nouveau  [   VBIOS][0000:01:00.0] version 80.06.59.00.1a
[    3.756997] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[    3.756999] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[    3.757000] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    3.779204] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    3.779210] nouveau  [  PTHERM][0000:01:00.0] fan management: disabled
[    3.779212] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    3.793523] [TTM] Zone  kernel: Available graphics memory: 2044946 kiB
[    3.793524] [TTM] Initializing pool allocator
[    3.793528] [TTM] Initializing DMA pool allocator
[    3.793535] nouveau  [     DRM] VRAM: 2048 MiB
[    3.793536] nouveau  [     DRM] GART: 1048576 MiB
[    3.793539] nouveau  [     DRM] TMDS table version 2.0
[    3.793540] nouveau  [     DRM] DCB version 4.0
[    3.793541] nouveau  [     DRM] DCB outp 00: 02000f00 00000000
[    3.793543] nouveau  [     DRM] DCB outp 01: 01000f02 00020030
[    3.793544] nouveau  [     DRM] DCB outp 03: 02011f62 00020010
[    3.793545] nouveau  [     DRM] DCB outp 04: 04822fb6 0f420010
[    3.793547] nouveau  [     DRM] DCB outp 05: 04022f72 00020010
[    3.793548] nouveau  [     DRM] DCB outp 06: 08033f82 00020030
[    3.793549] nouveau  [     DRM] DCB conn 00: 00001030
[    3.793551] nouveau  [     DRM] DCB conn 01: 00010161
[    3.793552] nouveau  [     DRM] DCB conn 02: 00020246
[    3.793553] nouveau  [     DRM] DCB conn 03: 01000331
[    3.794556] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.794557] [drm] No driver support for vblank timestamp query.
[    3.794611] nouveau W[     DRM] voltage table 0x50 unknown
[    3.794614] nouveau  [     DRM] 4 available performance level(s)
[    3.794617] nouveau  [     DRM] 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV
[    3.794619] nouveau  [     DRM] 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV
[    3.794621] nouveau  [     DRM] 2: core 1502MHz shader 3004MHz memory 1080MHz voltage 60mV
[    3.794623] nouveau  [     DRM] 3: core 1502MHz shader 3004MHz memory 1080MHz voltage 40mV
[    3.794624] nouveau  [     DRM] c:
[    3.803882] nouveau  [     DRM] MM: using COPY for buffer copies
[    3.882356] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    3.938405] ata2: SATA link down (SStatus 0 SControl 300)
[    3.938446] ata3: SATA link down (SStatus 0 SControl 300)
[    3.942397] ata5: SATA link down (SStatus 0 SControl 300)
[    3.945191] nouveau  [     DRM] allocated 1280x1024 fb: 0x80000, bo ffff880127700800
[    3.945253] fbcon: nouveaufb (fb0) is primary device
[    3.946438] ata6: SATA link down (SStatus 0 SControl 300)
[    4.018282] Console: switching to colour frame buffer device 160x64
[    4.019296] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    4.019298] nouveau 0000:01:00.0: registered panic notifier




dmesg μετά απο επανεκκίνηση
Κώδικας: Επιλογή όλων
[    3.558722] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.558723] usb usb7: Product: OHCI PCI host controller
[    3.558724] usb usb7: Manufacturer: Linux 3.11.0-15-generic ohci_hcd
[    3.558726] usb usb7: SerialNumber: 0000:00:16.0
[    3.558863] hub 7-0:1.0: USB hub found
[    3.558867] hub 7-0:1.0: 4 ports detected
[    3.558970] ohci-platform: OHCI generic platform driver
[    3.558994] uhci_hcd: USB Universal Host Controller Interface driver
[    3.559109] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.559115] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 8
[    3.559203] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[    3.559240] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[    3.559242] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.559243] usb usb8: Product: xHCI Host Controller
[    3.559244] usb usb8: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    3.559245] usb usb8: SerialNumber: 0000:02:00.0
[    3.559347] xHCI xhci_add_endpoint called for root hub
[    3.559348] xHCI xhci_check_bandwidth called for root hub
[    3.559362] hub 8-0:1.0: USB hub found
[    3.559366] hub 8-0:1.0: 2 ports detected
[    3.559410] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.559412] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[    3.559426] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
[    3.559428] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.559429] usb usb9: Product: xHCI Host Controller
[    3.559430] usb usb9: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    3.559431] usb usb9: SerialNumber: 0000:02:00.0
[    3.559496] xHCI xhci_add_endpoint called for root hub
[    3.559497] xHCI xhci_check_bandwidth called for root hub
[    3.559508] hub 9-0:1.0: USB hub found
[    3.559512] hub 9-0:1.0: 2 ports detected
[    3.566892] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    3.566899] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
[    3.566983] xhci_hcd 0000:04:00.0: irq 73 for MSI/MSI-X
[    3.567021] usb usb10: New USB device found, idVendor=1d6b, idProduct=0002
[    3.567022] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.567024] usb usb10: Product: xHCI Host Controller
[    3.567025] usb usb10: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    3.567026] usb usb10: SerialNumber: 0000:04:00.0
[    3.567120] xHCI xhci_add_endpoint called for root hub
[    3.567121] xHCI xhci_check_bandwidth called for root hub
[    3.567136] hub 10-0:1.0: USB hub found
[    3.567142] hub 10-0:1.0: 2 ports detected
[    3.567188] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    3.567191] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 11
[    3.567205] usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
[    3.567206] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.567208] usb usb11: Product: xHCI Host Controller
[    3.567209] usb usb11: Manufacturer: Linux 3.11.0-15-generic xhci_hcd
[    3.567210] usb usb11: SerialNumber: 0000:04:00.0
[    3.567272] xHCI xhci_add_endpoint called for root hub
[    3.567273] xHCI xhci_check_bandwidth called for root hub
[    3.567286] hub 11-0:1.0: USB hub found
[    3.567290] hub 11-0:1.0: 2 ports detected
[    3.578967] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.579450] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.579468] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.579804] mousedev: PS/2 mouse device common for all mice
[    3.580092] rtc_cmos 00:05: RTC can wake from S4
[    3.580272] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    3.580303] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.580469] device-mapper: uevent: version 1.0.3
[    3.580620] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
[    3.580733] cpuidle: using governor ladder
[    3.580738] cpuidle: using governor menu
[    3.580764] ledtrig-cpu: registered to indicate activity on CPUs
[    3.580974] TCP: cubic registered
[    3.581220] NET: Registered protocol family 10
[    3.581694] NET: Registered protocol family 17
[    3.581719] Key type dns_resolver registered
[    3.582522] PM: Hibernation image not present or could not be loaded.
[    3.582530] Loading module verification certificates
[    3.585675] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: e20ade5b3af83aaa8563f0ef4119a030c4d3ffdb'
[    3.585700] registered taskstats version 1
[    3.587861] Key type trusted registered
[    3.589503] Key type encrypted registered
[    3.591106] AppArmor: AppArmor sha1 policy hashing enabled
[    3.591705]   Magic number: 6:458:740
[    3.591847] rtc_cmos 00:05: setting system clock to 2014-03-16 15:44:39 UTC (1394984679)
[    3.592091] acpi-cpufreq: overriding BIOS provided _PSD data
[    3.592450] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.592451] EDD information not available.
[    3.593634] Freeing unused kernel memory: 1392K (ffffffff81d0f000 - ffffffff81e6b000)
[    3.593636] Write protecting the kernel read-only data: 12288k
[    3.595097] Freeing unused kernel memory: 672K (ffff880001758000 - ffff880001800000)
[    3.595154] Freeing unused kernel memory: 20K (ffff880001bfb000 - ffff880001c00000)
[    3.608679] udevd[121]: starting version 175
[    3.625352] ahci 0000:00:11.0: version 3.0
[    3.625540] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    3.625543] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[    3.627458] scsi0 : ahci
[    3.627692] scsi1 : ahci
[    3.627948] scsi2 : ahci
[    3.628011] scsi3 : ahci
[    3.628057] scsi4 : ahci
[    3.628104] scsi5 : ahci
[    3.628152] ata1: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b100 irq 19
[    3.628155] ata2: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b180 irq 19
[    3.628156] ata3: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b200 irq 19
[    3.628158] ata4: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b280 irq 19
[    3.628160] ata5: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b300 irq 19
[    3.628162] ata6: SATA max UDMA/133 abar m1024@0xfe40b000 port 0xfe40b380 irq 19
[    3.641181] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    3.641194] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[    3.641404] r8169 0000:03:00.0: irq 74 for MSI/MSI-X
[    3.641545] r8169 0000:03:00.0 eth0: RTL8168evl/8111evl at 0xffffc9000065c000, 94:de:80:78:2a:2d, XID 0c900800 IRQ 74
[    3.641547] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    3.644268] wmi: Mapper loaded
[    3.656029] [drm] Initialized drm 1.1.0 20060810
[    3.670273] MXM: GUID detected in BIOS
[    3.670563] nouveau  [  DEVICE][0000:01:00.0] BOOT0  : 0x0e6020a1
[    3.670567] nouveau  [  DEVICE][0000:01:00.0] Chipset: GK106 (NVE6)
[    3.670568] nouveau  [  DEVICE][0000:01:00.0] Family : NVE0
[    3.671158] nouveau  [   VBIOS][0000:01:00.0] checking PRAMIN for image...
[    3.671164] nouveau  [   VBIOS][0000:01:00.0] ... signature not found
[    3.671165] nouveau  [   VBIOS][0000:01:00.0] checking PROM for image...
[    3.781954] nouveau  [   VBIOS][0000:01:00.0] ... appears to be valid
[    3.781955] nouveau  [   VBIOS][0000:01:00.0] using image from PROM
[    3.782060] nouveau  [   VBIOS][0000:01:00.0] BIT signature found
[    3.782062] nouveau  [   VBIOS][0000:01:00.0] version 80.06.59.00.1a
[    3.782329] nouveau  [     PFB][0000:01:00.0] RAM type: GDDR5
[    3.782331] nouveau  [     PFB][0000:01:00.0] RAM size: 2048 MiB
[    3.782332] nouveau  [     PFB][0000:01:00.0]    ZCOMP: 0 tags
[    3.804537] nouveau  [  PTHERM][0000:01:00.0] FAN control: none / external
[    3.804541] nouveau  [  PTHERM][0000:01:00.0] fan management: disabled
[    3.804544] nouveau  [  PTHERM][0000:01:00.0] internal sensor: yes
[    3.818751] firewire_ohci 0000:05:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x11
[    3.818775] [TTM] Zone  kernel: Available graphics memory: 2044946 kiB
[    3.818776] [TTM] Initializing pool allocator
[    3.818779] [TTM] Initializing DMA pool allocator
[    3.818786] nouveau  [     DRM] VRAM: 2048 MiB
[    3.818787] nouveau  [     DRM] GART: 1048576 MiB
[    3.818790] nouveau  [     DRM] TMDS table version 2.0
[    3.818791] nouveau  [     DRM] DCB version 4.0
[    3.818793] nouveau  [     DRM] DCB outp 00: 02000f00 00000000
[    3.818794] nouveau  [     DRM] DCB outp 01: 01000f02 00020030
[    3.818795] nouveau  [     DRM] DCB outp 03: 02011f62 00020010
[    3.818796] nouveau  [     DRM] DCB outp 04: 04822fb6 0f420010
[    3.818798] nouveau  [     DRM] DCB outp 05: 04022f72 00020010
[    3.818799] nouveau  [     DRM] DCB outp 06: 08033f82 00020030
[    3.818801] nouveau  [     DRM] DCB conn 00: 00001030
[    3.818803] nouveau  [     DRM] DCB conn 01: 00010161
[    3.818805] nouveau  [     DRM] DCB conn 02: 00020246
[    3.818807] nouveau  [     DRM] DCB conn 03: 01000331
[    3.819796] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    3.819797] [drm] No driver support for vblank timestamp query.
[    3.819850] nouveau W[     DRM] voltage table 0x50 unknown
[    3.819853] nouveau  [     DRM] 4 available performance level(s)
[    3.819856] nouveau  [     DRM] 0: core 162MHz shader 324MHz memory 648MHz voltage 100mV
[    3.819858] nouveau  [     DRM] 1: core 405MHz shader 810MHz memory 1080MHz voltage 80mV
[    3.819860] nouveau  [     DRM] 2: core 1502MHz shader 3004MHz memory 1080MHz voltage 60mV
[    3.819862] nouveau  [     DRM] 3: core 1502MHz shader 3004MHz memory 1080MHz voltage 40mV
[    3.819863] nouveau  [     DRM] c:
[    3.829118] nouveau  [     DRM] MM: using COPY for buffer copies
[    3.946972] ata2: SATA link down (SStatus 0 SControl 300)
[    3.950973] ata5: SATA link down (SStatus 0 SControl 300)
[    3.951038] ata6: SATA link down (SStatus 0 SControl 300)
[    3.951079] ata3: SATA link down (SStatus 0 SControl 300)
[    3.969717] nouveau  [     DRM] allocated 1280x1024 fb: 0x80000, bo ffff880128012000
[    3.969788] fbcon: nouveaufb (fb0) is primary device
[    4.051782] Console: switching to colour frame buffer device 160x64
[    4.052795] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[    4.052796] nouveau 0000:01:00.0: registered panic notifier
[    4.052799] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 0
[    4.123065] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.124702] ata4.00: ATAPI: Optiarc DVD RW AD-5260S, 1.00, max UDMA/100
[    4.126842] ata4.00: configured for UDMA/100
[    4.194487] xor: measuring software checksum speed
[    4.227142] usb 7-1: new low-speed USB device number 2 using ohci-pci
[    4.231122]    prefetch64-sse: 13289.000 MB/sec
[    4.231143] tsc: Refined TSC clocksource calibration: 3415.596 MHz
[    4.271136]    generic_sse: 12907.000 MB/sec
[    4.271137] xor: using function: prefetch64-sse (13289.000 MB/sec)
[    4.339194] raid6: sse2x1    4570 MB/s
[    4.367227] usb 7-1: device descriptor read/64, error -32
[    4.407235] raid6: sse2x2    7427 MB/s
[    4.475280] raid6: sse2x4    8601 MB/s
[    4.475281] raid6: using algorithm sse2x4 (8601 MB/s)
[    4.475282] raid6: using intx1 recovery algorithm
[    4.475377] firewire_core 0000:05:0e.0: created device fw0: GUID 0049e550e5d20b00, S400
[    4.485764] bio: create slab <bio-1> at 1
[    4.485938] Btrfs loaded
[    4.493548] device-mapper: dm-raid45: initialized v0.2594b
[    4.611420] usb 7-1: device descriptor read/64, error -32
[    4.847583] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.848176] ata1.00: ATA-7: Maxtor 6Y120M0, YAR51EW0, max UDMA/133
[    4.848179] ata1.00: 240121728 sectors, multi 0: LBA
[    4.848851] ata1.00: configured for UDMA/133
[    4.848995] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y120M0   YAR5 PQ: 0 ANSI: 5
[    4.849146] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.849172] sd 0:0:0:0: [sda] 240121728 512-byte logical blocks: (122 GB/114 GiB)
[    4.849233] sd 0:0:0:0: [sda] Write Protect is off
[    4.849235] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.849273] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.850724] scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-5260S  1.00 PQ: 0 ANSI: 5
[    4.851541] usb 7-1: new low-speed USB device number 3 using ohci-pci
[    4.853369] sr0: scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray
[    4.853372] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.853472] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    4.853573] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    4.920219]  sda: sda1 sda4 < sda5 sda6 sda7 >
[    4.920649] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.991666] usb 7-1: device descriptor read/64, error -32
[    5.231901] Switched to clocksource tsc
[    5.235825] usb 7-1: device descriptor read/64, error -32
[    5.507963] usb 7-1: new low-speed USB device number 4 using ohci-pci
[    5.916281] usb 7-1: device not accepting address 4, error -32
[    6.052368] usb 7-1: new low-speed USB device number 5 using ohci-pci
[    6.460631] usb 7-1: device not accepting address 5, error -32
[    6.460661] hub 7-0:1.0: unable to enumerate USB device on port 1
[    6.600727] usb 7-2: new full-speed USB device number 6 using ohci-pci
[    6.649089] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    6.740829] usb 7-2: device descriptor read/64, error -32
[    6.800305] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[    6.984996] usb 7-2: device descriptor read/64, error -32
[    7.225144] usb 7-2: new full-speed USB device number 7 using ohci-pci
[    7.365231] usb 7-2: device descriptor read/64, error -32
[    7.430829] ISO 9660 Extensions: Microsoft Joliet Level 3
[    7.433233] ISO 9660 Extensions: RRIP_1991A
[    7.609363] usb 7-2: device descriptor read/64, error -32
[    7.769688] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    7.849553] usb 7-2: new full-speed USB device number 8 using ohci-pci
[    8.257829] usb 7-2: device not accepting address 8, error -32
[    8.393915] usb 7-2: new full-speed USB device number 9 using ohci-pci
[    8.802183] usb 7-2: device not accepting address 9, error -32
[    8.802211] hub 7-0:1.0: unable to enumerate USB device on port 2
[   42.003251] Adding 3070968k swap on /dev/sda6.  Priority:-1 extents:1 across:3070968k FS
[   42.248469] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   42.416260] udevd[1395]: starting version 175
[   47.001758] device-mapper: multipath: version 1.5.1 loaded
[   47.081503] Bluetooth: Core ver 2.16
[   47.081524] NET: Registered protocol family 31
[   47.081525] Bluetooth: HCI device and connection manager initialized
[   47.081533] Bluetooth: HCI socket layer initialized
[   47.081534] Bluetooth: L2CAP socket layer initialized
[   47.081538] Bluetooth: SCO socket layer initialized
[   47.345956] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   47.572403] Bluetooth: RFCOMM TTY layer initialized
[   47.572412] Bluetooth: RFCOMM socket layer initialized
[   47.572413] Bluetooth: RFCOMM ver 1.11
[   47.652385] MCE: In-kernel MCE decoding enabled.
[   47.700863] EDAC MC: Ver: 3.0.0
[   47.738936] lp: driver loaded but no devices found
[   47.805742] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   47.805802] sp5100_tco: PCI Revision ID: 0x42
[   47.805832] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
[   47.805842] sp5100_tco: Last reboot was not triggered by watchdog.
[   47.805882] sp5100_tco: initialized (0xffffc900107ceb00). heartbeat=60 sec (nowayout=0)
[   47.893071] AMD64 EDAC driver v3.4.0
[   47.893111] EDAC amd64: DRAM ECC disabled.
[   47.893119] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[   47.893119]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[   47.893119]  (Note that use of the override may cause unknown side effects.)
[   47.902794] init: failsafe main process (1577) killed by TERM signal
[   48.053201] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   48.053203] Bluetooth: BNEP filters: protocol multicast
[   48.053211] Bluetooth: BNEP socket layer initialized
[   48.222671] ppdev: user-space parallel port driver
[   52.212360] hda-intel 0000:00:14.2: Using LPIB position fix
[   52.215873] hda-intel 0000:00:14.2: Enable sync_write for stable communication
[   52.759389] SKU: Nid=0x1d sku_cfg=0x4005e601
[   52.759391] SKU: port_connectivity=0x1
[   52.759392] SKU: enable_pcbeep=0x0
[   52.759393] SKU: check_sum=0x00000005
[   52.759394] SKU: customization=0x000000e6
[   52.759395] SKU: external_amp=0x0
[   52.759395] SKU: platform_type=0x0
[   52.759396] SKU: swap=0x0
[   52.759397] SKU: override=0x1
[   52.759819] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   52.759821]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   52.759822]    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   52.759822]    mono: mono_out=0x0
[   52.759823]    dig-out=0x11/0x1e
[   52.759824]    inputs:
[   52.759825]      Front Mic=0x19
[   52.759826]      Rear Mic=0x18
[   52.759827]      Line=0x1a
[   52.759828] realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
[   52.759829] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0889
[   52.774034] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input2
[   52.774100] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[   52.774148] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   52.774195] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   52.774241] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   52.774287] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   52.774334] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   52.774380] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   52.774646] hda_intel: Disabling MSI
[   52.774657] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[   52.774686] hda-intel 0000:01:00.1: Disabling 64bit DMA
[   52.777602] hda-intel 0000:01:00.1: Enable delay in RIRB handling
[   53.547875] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
[   53.547941] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
[   53.547996] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[   53.548057] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[   57.276300] r8169 0000:03:00.0 eth0: link down
[   57.276343] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   57.276561] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   58.190478] init: alsa-restore main process (1855) terminated with status 99
[   77.435656] usb 7-1: new low-speed USB device number 10 using ohci-pci
[   77.575751] usb 7-1: device descriptor read/64, error -32
[   77.819909] usb 7-1: device descriptor read/64, error -32
[   78.060069] usb 7-1: new low-speed USB device number 11 using ohci-pci
[   78.200167] usb 7-1: device descriptor read/64, error -32
[   78.444331] usb 7-1: device descriptor read/64, error -32
[   78.684483] usb 7-1: new low-speed USB device number 12 using ohci-pci
[   79.092723] usb 7-1: device not accepting address 12, error -32
[   79.228812] usb 7-1: new low-speed USB device number 13 using ohci-pci
[   79.637115] usb 7-1: device not accepting address 13, error -32
[   79.637150] hub 7-0:1.0: unable to enumerate USB device on port 1
[   79.773191] usb 7-2: new full-speed USB device number 14 using ohci-pci
[   79.913300] usb 7-2: device descriptor read/64, error -32
[   80.157458] usb 7-2: device descriptor read/64, error -32
[   80.397594] usb 7-2: new full-speed USB device number 15 using ohci-pci
[   80.537702] usb 7-2: device descriptor read/64, error -32
[   80.781866] usb 7-2: device descriptor read/64, error -32
[   81.022023] usb 7-2: new full-speed USB device number 16 using ohci-pci
[   81.430270] usb 7-2: device not accepting address 16, error -32
[   81.566352] usb 7-2: new full-speed USB device number 17 using ohci-pci
[   81.974657] usb 7-2: device not accepting address 17, error -32
[   81.974670] hub 7-0:1.0: unable to enumerate USB device on port 2
[   82.186798] usb 7-1: new low-speed USB device number 18 using ohci-pci
[   82.326884] usb 7-1: device descriptor read/64, error -32
[   82.571046] usb 7-1: device descriptor read/64, error -32
[   82.811206] usb 7-1: new low-speed USB device number 19 using ohci-pci
[   82.951294] usb 7-1: device descriptor read/64, error -32
[   83.195458] usb 7-1: device descriptor read/64, error -32
[   83.435620] usb 7-1: new low-speed USB device number 20 using ohci-pci
[   83.843886] usb 7-1: device not accepting address 20, error -32
[   83.979982] usb 7-1: new low-speed USB device number 21 using ohci-pci
[   84.388246] usb 7-1: device not accepting address 21, error -32
[   84.388281] hub 7-0:1.0: unable to enumerate USB device on port 1
[   84.524344] usb 7-2: new full-speed USB device number 22 using ohci-pci
[   84.664431] usb 7-2: device descriptor read/64, error -32
[   84.908596] usb 7-2: device descriptor read/64, error -32
[   85.148754] usb 7-2: new full-speed USB device number 23 using ohci-pci
[   85.288843] usb 7-2: device descriptor read/64, error -32
[   85.532986] usb 7-2: device descriptor read/64, error -32
[   85.773165] usb 7-2: new full-speed USB device number 24 using ohci-pci
[   86.181435] usb 7-2: device not accepting address 24, error -32
[   86.317512] usb 7-2: new full-speed USB device number 25 using ohci-pci
[   86.725797] usb 7-2: device not accepting address 25, error -32
[   86.725831] hub 7-0:1.0: unable to enumerate USB device on port 2
[   86.937906] usb 7-1: new low-speed USB device number 26 using ohci-pci
[   87.078031] usb 7-1: device descriptor read/64, error -32
[   87.322192] usb 7-1: device descriptor read/64, error -32
[   87.562328] usb 7-1: new low-speed USB device number 27 using ohci-pci
[   87.702442] usb 7-1: device descriptor read/64, error -32
[   87.946605] usb 7-1: device descriptor read/64, error -32
[   88.186766] usb 7-1: new low-speed USB device number 28 using ohci-pci
[   88.595047] usb 7-1: device not accepting address 28, error -32
[   88.731147] usb 7-1: new low-speed USB device number 29 using ohci-pci
[   89.139409] usb 7-1: device not accepting address 29, error -32
[   89.139441] hub 7-0:1.0: unable to enumerate USB device on port 1
[   89.275499] usb 7-2: new full-speed USB device number 30 using ohci-pci
[   89.415593] usb 7-2: device descriptor read/64, error -32
[   89.659754] usb 7-2: device descriptor read/64, error -32
[   89.899916] usb 7-2: new full-speed USB device number 31 using ohci-pci
[   90.040006] usb 7-2: device descriptor read/64, error -32
[   90.284171] usb 7-2: device descriptor read/64, error -32
[   90.524327] usb 7-2: new full-speed USB device number 32 using ohci-pci
[   90.932598] usb 7-2: device not accepting address 32, error -32
[   91.068653] usb 7-2: new full-speed USB device number 33 using ohci-pci
[   91.476956] usb 7-2: device not accepting address 33, error -32
[   91.476993] hub 7-0:1.0: unable to enumerate USB device on port 2
[   91.689102] usb 7-1: new low-speed USB device number 34 using ohci-pci
[   91.829193] usb 7-1: device descriptor read/64, error -32
[   92.073353] usb 7-1: device descriptor read/64, error -32
[   92.313515] usb 7-1: new low-speed USB device number 35 using ohci-pci
[   92.453603] usb 7-1: device descriptor read/64, error -32
[   92.697768] usb 7-1: device descriptor read/64, error -32
[   92.937880] usb 7-1: new low-speed USB device number 36 using ohci-pci
[   93.346193] usb 7-1: device not accepting address 36, error -32
[   93.482285] usb 7-1: new low-speed USB device number 37 using ohci-pci
[   93.890554] usb 7-1: device not accepting address 37, error -32
[   93.890586] hub 7-0:1.0: unable to enumerate USB device on port 1
[   94.026658] usb 7-2: new full-speed USB device number 38 using ohci-pci
[   94.166741] usb 7-2: device descriptor read/64, error -32
[   94.410901] usb 7-2: device descriptor read/64, error -32
[   94.651065] usb 7-2: new full-speed USB device number 39 using ohci-pci
[   94.791166] usb 7-2: device descriptor read/64, error -32
[   95.035317] usb 7-2: device descriptor read/64, error -32
[   95.275433] usb 7-2: new full-speed USB device number 40 using ohci-pci
[   95.683746] usb 7-2: device not accepting address 40, error -32
[   95.819837] usb 7-2: new full-speed USB device number 41 using ohci-pci
[   96.228104] usb 7-2: device not accepting address 41, error -32
[   96.228137] hub 7-0:1.0: unable to enumerate USB device on port 2
[   97.228769] usb 7-1: new low-speed USB device number 42 using ohci-pci
[   97.368863] usb 7-1: device descriptor read/64, error -32
[   97.613022] usb 7-1: device descriptor read/64, error -32
[   97.853185] usb 7-1: new low-speed USB device number 43 using ohci-pci
[   97.993257] usb 7-1: device descriptor read/64, error -32
[   98.237440] usb 7-1: device descriptor read/64, error -32
[   98.477596] usb 7-1: new low-speed USB device number 44 using ohci-pci
[   98.885866] usb 7-1: device not accepting address 44, error -32
[   99.021939] usb 7-1: new low-speed USB device number 45 using ohci-pci
[   99.430224] usb 7-1: device not accepting address 45, error -32
[   99.430237] hub 7-0:1.0: unable to enumerate USB device on port 1
[   99.670387] usb 8-1: new full-speed USB device number 2 using xhci_hcd
[   99.725530] usb 8-1: New USB device found, idVendor=045e, idProduct=0724
[   99.725534] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   99.725536] usb 8-1: Product: SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse
[   99.725537] usb 8-1: Manufacturer: Microsoft
[   99.862481] usb 7-1: new low-speed USB device number 46 using ohci-pci
[  100.002610] usb 7-1: device descriptor read/64, error -32
[  100.246778] usb 7-1: device descriptor read/64, error -32
[  100.486930] usb 7-1: new low-speed USB device number 47 using ohci-pci
[  100.627023] usb 7-1: device descriptor read/64, error -32
[  100.710960] hidraw: raw HID events driver (C) Jiri Kosina
[  100.871183] usb 7-1: device descriptor read/64, error -32
[  101.111339] usb 7-1: new low-speed USB device number 48 using ohci-pci
[  101.122470] usbcore: registered new interface driver usbhid
[  101.122472] usbhid: USB HID core driver
[  101.479860] input: Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse as /devices/pci0000:00/0000:00:04.0/0000:02:00.0/usb8/8-1/8-1:1.0/input/input14
[  101.479970] hid-generic 0003:045E:0724.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse] on usb-0000:02:00.0-1/input0
[  101.519608] usb 7-1: device not accepting address 48, error -32
[  101.655704] usb 7-1: new low-speed USB device number 49 using ohci-pci
[  102.063972] usb 7-1: device not accepting address 49, error -32
[  102.064007] hub 7-0:1.0: unable to enumerate USB device on port 1
[  102.276122] usb 7-1: new low-speed USB device number 50 using ohci-pci
[  102.460240] usb 7-1: New USB device found, idVendor=06a3, idProduct=0728
[  102.460244] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  102.460245] usb 7-1: Product: Saitek Cyborg Keyboard
[  102.460247] usb 7-1: Manufacturer: Chicony
[  102.472436] input: Chicony Saitek Cyborg Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.0/input/input15
[  102.472512] hid-generic 0003:06A3:0728.0002: input,hidraw1: USB HID v1.11 Keyboard [Chicony Saitek Cyborg Keyboard] on usb-0000:00:16.0-1/input0
[  102.482325] input: Chicony Saitek Cyborg Keyboard as /devices/pci0000:00/0000:00:16.0/usb7/7-1/7-1:1.1/input/input16
[  102.482463] hid-generic 0003:06A3:0728.0003: input,hiddev0,hidraw2: USB HID v1.11 Device [Chicony Saitek Cyborg Keyboard] on usb-0000:00:16.0-1/input1
[  110.273412] usb 1-5: new high-speed USB device number 2 using ehci-pci
[  110.793747] usb 1-5: device not accepting address 2, error -32
[  110.905785] usb 1-5: new high-speed USB device number 3 using ehci-pci
[  111.017914] usb 1-5: device descriptor read/64, error -32
[  111.642309] usb 1-5: device not accepting address 3, error -32
[  111.754389] usb 1-5: new high-speed USB device number 4 using ehci-pci
[  111.979632] usb 1-5: unable to get BOS descriptor
[  111.980758] usb 1-5: unable to read config index 0 descriptor/start: -32
[  111.980760] usb 1-5: chopping to 0 config(s)
[  111.983883] usb 1-5: string descriptor 0 read error: -32
[  111.983886] usb 1-5: New USB device found, idVendor=1b1c, idProduct=1a06
[  111.983888] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.983975] usb 1-5: no configuration chosen from 0 choices
[  117.189210] usb 1-5: USB disconnect, device number 4


lspci
Κώδικας: Επιλογή όλων
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx0 port B) (rev 02)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port B)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port D)
00:09.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (PCI express gpp port H)
00:0a.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890 PCI to PCI bridge (external gfx1 port A)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation GK106 [GeForce GTX 650 Ti Boost] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK106 HDMI Audio Controller (rev a1)
02:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 USB controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01)
05:0e.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)


ΥΓ: παρατήρησα πως η εντολή dmesg κάθε φορά έδινε διαφορετικά αποτελέσματα γι αυτο έκανα επανεκκίνηση και εκτέλεσα εκ νέου την εντολή :!:
Spoiler: show
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Μέτριο
Λειτουργικό ⇛ Linux x32
Προδιαγραφές ⇛ AMD FX 8350 │4GB │ Audio Realtek ALC889│ TFT 19"
Κάρτα Γραφικών ⇛ NVIDIA gtx 650 TI BOOST

-------------------------------------------------------------------------------------------
Η Εξουσία που αποκτήθηκε παράνομα,ποτέ δεν χρησιμοποιείται για το καλό των ανθρώπων (Τάκιτος)
Όσο ποιο σάπιο είναι ένα κράτος τόσο πληθύνονται οι νόμοι. (Τάκιτος)
πᾶ­σά τε ἐ­πι­στή­μη χω­ρι­ζο­μέ­νη δι­και­ο­σύ­νης καὶ τῆς ἄλ­λης ἀ­ρε­τῆς πα­νουρ­γί­α, οὐ σο­φί­α φα­ί­νε­ται .(Πλάτων)
Dimitrios.gr
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 880
Εγγραφή: 09 Ιούλ 2011, 19:17
Εκτύπωση

Re: προβλημα λειτουργίας υλικού με ubuntu 14.04 x64

Δημοσίευσηαπό Dimitrios.gr » 16 Μαρ 2014, 19:12

με μία γρήγορη ματιά πάντως παρατηρώ πως σχεδόν όλες οι θύρες usb δεν μπορούν να φορτώσουν καθώς και η θύρα ethernet , που οφείλετε αυτο στους οδηγούς, ή σε κάποια ασυμβατότητα με το bios !!!
Spoiler: show
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Μέτριο
Λειτουργικό ⇛ Linux x32
Προδιαγραφές ⇛ AMD FX 8350 │4GB │ Audio Realtek ALC889│ TFT 19"
Κάρτα Γραφικών ⇛ NVIDIA gtx 650 TI BOOST

-------------------------------------------------------------------------------------------
Η Εξουσία που αποκτήθηκε παράνομα,ποτέ δεν χρησιμοποιείται για το καλό των ανθρώπων (Τάκιτος)
Όσο ποιο σάπιο είναι ένα κράτος τόσο πληθύνονται οι νόμοι. (Τάκιτος)
πᾶ­σά τε ἐ­πι­στή­μη χω­ρι­ζο­μέ­νη δι­και­ο­σύ­νης καὶ τῆς ἄλ­λης ἀ­ρε­τῆς πα­νουρ­γί­α, οὐ σο­φί­α φα­ί­νε­ται .(Πλάτων)
Dimitrios.gr
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 880
Εγγραφή: 09 Ιούλ 2011, 19:17
Εκτύπωση

Re: προβλημα λειτουργίας υλικού με ubuntu 14.04 x64

Δημοσίευσηαπό the_eye » 16 Μαρ 2014, 22:33

1. Πόσες usb συσκευές έχεις ; Δοκίμασε να bootάρεις χωρίς τίποτα στο usb, μετά να συνδέσεις μία μόνο συσκευή και δώσε μας τότε το dmesg.

2. Δες στο bios αν το IOMMU Controller είναι ενεργοποιημένο.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 18.04 bionic 4.15.0-42-generic 64bit (el_GR.UTF-8, GNOME-Flashback:Unity gnome-flashback-compiz)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 3832 MiB ‖ Gigabyte B150M-HD3 DDR3-CF
4 Intel Sky Lake Integrated Graphics [8086:1912] {i915_bpo}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11455
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Ubuntu +1

cron