Seek_Error_Rate
Command_Timeout
πάρα πολλά, καλό είναι να ετοιμάζεσαι για αλλαγή.
Δείτε και τι βγάζει και σε δίσκο Nvme (SSD M2)
- Κώδικας: Επιλογή όλων
sudo smartctl -a /dev/nvme0
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.0-52-generic] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: INTEL SSDPEKKW256G7
Serial Number: XXX
Firmware Version: PSF100C
PCI Vendor/Subsystem ID: 0x8086
IEEE OUI Identifier: 0x5cd2e4
Controller ID: 1
NVMe Version: 1.2
Number of Namespaces: 1
Namespace 1 Size/Capacity: 256.060.514.304 [256 GB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Mon Oct 31 21:34:27 2022 EET
Firmware Updates (0x12): 1 Slot, no Reset required
Optional Admin Commands (0x0006): Format Frmw_DL
Optional NVM Commands (0x001e): Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat
Log Page Attributes (0x03): S/H_per_NS Cmd_Eff_Lg
Maximum Data Transfer Size: 32 Pages
Warning Comp. Temp. Threshold: 70 Celsius
Critical Comp. Temp. Threshold: 80 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 9.00W - - 0 0 0 0 5 5
1 + 4.60W - - 1 1 1 1 30 30
2 + 3.80W - - 2 2 2 2 30 30
3 - 0.0700W - - 3 3 3 3 10000 300
4 - 0.0050W - - 4 4 4 4 2000 10000
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 0
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 30 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 7%
Data Units Read: 58.386.591 [29,8 TB]
Data Units Written: 43.136.358 [22,0 TB]
Host Read Commands: 1.072.449.867
Host Write Commands: 2.829.257.878
Controller Busy Time: 6.888
Power Cycles: 3.235
Power On Hours: 33.083
Unsafe Shutdowns: 46
Media and Data Integrity Errors: 1
Error Information Log Entries: 1
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Error Information (NVMe Log 0x01, 16 of 64 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 1 2 0x0000 0x0286 - 0 1 -