Βλέπω κάποιο πιθανό πρόβλημα εδώ
- Κώδικας: Επιλογή όλων
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 5434
και μεγάλη θερμοκρασία
- Κώδικας: Επιλογή όλων
194 Temperature_Celsius 0x0022 092 080 000 Old_age Always - 55
Συντονιστής: adem1
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 5434
194 Temperature_Celsius 0x0022 092 080 000 Old_age Always - 55
the_eye έγραψε:Μπορεί να είναι 9ετίας ο σκληρός αλλά έχει δουλέψει μόνο 21929 ώρες δηλαδή 2,5 χρόνια. Οπότε δεν έχει σημαντικές φθορές.
Βλέπω κάποιο πιθανό πρόβλημα εδώ
- Κώδικας: Επιλογή όλων
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 5434
και μεγάλη θερμοκρασία
- Κώδικας: Επιλογή όλων
194 Temperature_Celsius 0x0022 092 080 000 Old_age Always - 55
the_eye έγραψε:Η θερμοκρασία που αναφέρω είναι του σκληρού δίσκου, όχι του cpu.
the_eye έγραψε:Αν συνέβαινε πάντα, τότε ίσος να είναι η κανονική θερμοκρασία λειτουργίας. Απλά σε γενικές γραμμές είναι λίγο υψηλή.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.15.0-34-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Travelstar 5K250
Device Model: Hitachi HTS542525K9SA00
Serial Number: 080524BB6F00WDJBX7BF
LU WWN Device Id: 5 000cca 533e19917
Firmware Version: BBFOC33P
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 3f
SATA Version is: SATA 2.5, 1.5 Gb/s
Local Time is: Sun Sep 30 17:02:49 2018 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 107) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0
3 Spin_Up_Time 0x0007 250 250 033 Pre-fail Always - 1
4 Start_Stop_Count 0x0012 095 095 000 Old_age Always - 7881
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0
9 Power_On_Hours 0x0012 035 035 000 Old_age Always - 28645
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 7713
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 099 099 000 Old_age Always - 213
193 Load_Cycle_Count 0x0012 096 096 000 Old_age Always - 47185
194 Temperature_Celsius 0x0002 177 177 000 Old_age Always - 31 (Min/Max 12/57)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 7
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 1
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 28167 -
# 2 Short offline Completed without error 00% 14985 -
# 3 Short offline Completed without error 00% 10068 -
# 4 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sotiris@ubuntu:~$ sudo smartctl -a /dev/sdb
[sudo] password for sotiris:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-10-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Toshiba 2.5" HDD MQ01ABD...
Device Model: TOSHIBA MQ01ABD100
Serial Number: Z3J5C03ST
LU WWN Device Id: 5 000039 533507fb4
Firmware Version: AX104H
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Nov 3 07:12:46 2018 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 237) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 1814
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 6555
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 055 055 000 Old_age Always - 18154
10 Spin_Retry_Count 0x0033 229 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5341
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 278
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 8388825
193 Load_Cycle_Count 0x0032 031 031 000 Old_age Always - 690392
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 24 (Min/Max 11/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 8
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 1
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 075 075 000 Old_age Always - 10251
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 272
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 128
SMART Error Log Version: 1
ATA Error Count: 3125 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3125 occurred at disk power-on lifetime: 18154 hours (756 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 80 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 80 00 08 00 40 00 00:04:00.899 READ FPDMA QUEUED
ef 05 fe 00 00 00 40 00 00:04:00.899 SET FEATURES [Enable APM]
e5 00 00 00 00 00 00 00 00:04:00.899 CHECK POWER MODE
ef 10 02 00 00 00 a0 00 00:04:00.898 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:04:00.898 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 3124 occurred at disk power-on lifetime: 18154 hours (756 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 00 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 00 00 08 00 40 00 00:03:57.100 READ FPDMA QUEUED
b0 da 00 00 4f c2 00 00 00:03:57.000 SMART RETURN STATUS
ec 00 01 00 00 00 40 00 00:03:56.999 IDENTIFY DEVICE
b0 d5 01 01 4f c2 00 00 00:03:56.926 SMART READ LOG
60 08 b8 f0 67 70 40 00 00:03:56.902 READ FPDMA QUEUED
Error 3123 occurred at disk power-on lifetime: 18154 hours (756 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 d0 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 d0 00 08 00 40 00 00:03:52.608 READ FPDMA QUEUED
ec 00 01 00 00 00 00 00 00:03:52.608 IDENTIFY DEVICE
ec 00 01 00 00 00 00 00 00:03:52.607 IDENTIFY DEVICE
ef 10 02 00 00 00 a0 00 00:03:52.607 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:03:52.606 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 3122 occurred at disk power-on lifetime: 18154 hours (756 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 58 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 58 00 08 00 40 00 00:03:48.798 READ FPDMA QUEUED
60 08 50 a0 61 70 40 00 00:03:48.794 READ FPDMA QUEUED
60 08 48 f8 69 70 40 00 00:03:48.785 READ FPDMA QUEUED
60 08 40 d0 69 70 40 00 00:03:48.785 READ FPDMA QUEUED
60 08 38 e0 69 70 40 00 00:03:48.785 READ FPDMA QUEUED
Error 3121 occurred at disk power-on lifetime: 18154 hours (756 days + 10 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 41 a0 00 08 00 40 Error: UNC at LBA = 0x00000800 = 2048
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 08 a0 00 08 00 40 00 00:03:44.027 READ FPDMA QUEUED
ef 10 02 00 00 00 a0 00 00:03:44.027 SET FEATURES [Enable SATA feature]
27 00 00 00 00 00 e0 00 00:03:44.026 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:03:44.026 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:03:44.025 SET FEATURES [Set transfer mode]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sotiris@ubuntu:~$