Έλεγχος σκληρού δίσκου Hardware

...το μέρος για να ξεκινήσετε!

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Παρακαλώ να επιλέξετε, με προσοχή, την άδεια που θέλετε να έχουν οι οδηγοί που συγγράφετε.
Πληροφορίες για τις άδειες μπορείτε να βρείτε εδώ.
Άμα επιθυμείτε κάποια άλλη άδεια επικοινωνήστε με κάποιο Διαχειριστή είτε Συντονιστή.

Σημαντικό είναι να χρησιμοποιήσετε την υπηρεσία http://imagebin.ubuntu-gr.org για τις εικόνες.

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 23 Απρ 2016, 15:06

Γενικά προτού κάνουμε εγκατάσταση κάποιου λειτουργικού θα πρέπει να ελέγξουμε ότι όλο το hardware λειτουργεί απρόσκοπτα.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό dgtfeargr » 17 Μάιος 2016, 10:13

dgtfeargr έγραψε:Aυτά είναι τα αποτελέσματα ένα χρόνο και 3 μήνες πριν:

dgtfeargr έγραψε:Ο Δίσκος του λάπτοπ:

Κώδικας: Επιλογή όλων
invisible@invisible-Aspire-7736:~$ sudo smartctl -a /dev/sda
[sudo] password for invisible:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-22-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA
Device Model: WDC WD5000BEVT-22ZAT0
Serial Number: WD-WXQ0A99J4715
LU WWN Device Id: 5 0014ee 2039148a1
Firmware Version: 01.01A01
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Jan 27 19:11:38 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 154) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 3721
3 Spin_Up_Time 0x0027 185 176 021 Pre-fail Always - 1725
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3618
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 6828
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3556
192 Power-Off_Retract_Count 0x0032 199 199 000 Old_age Always - 854
193 Load_Cycle_Count 0x0032 151 151 000 Old_age Always - 149242
194 Temperature_Celsius 0x0022 114 080 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

invisible@invisible-Aspire-7736:~$



και αυτά είναι τώρα:

Κώδικας: Επιλογή όλων
invisible@invisible-Aspire-7736:~$ sudo smartctl -a /dev/sda
[sudo] password for invisible:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD5000BEVT-22ZAT0
Serial Number:    WD-WXQ0A99J4715
LU WWN Device Id: 5 0014ee 2039148a1
Firmware Version: 01.01A01
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed May 14 23:26:46 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (13200) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 154) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x303f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       4038
  3 Spin_Up_Time            0x0027   184   174   021    Pre-fail  Always       -       1791
  4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5009
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       10669
10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4943
192 Power-Off_Retract_Count 0x0032   199   199   000    Old_age   Always       -       1011
193 Load_Cycle_Count        0x0032   149   149   000    Old_age   Always       -       153063
194 Temperature_Celsius     0x0022   090   080   000    Old_age   Always       -       57
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

invisible@invisible-Aspire-7736:~$


πρέπει να ανησυχώ; γιατί μερικές τιμές αυξήθηκαν


Και οι τιμές σήμερα:

Κώδικας: Επιλογή όλων
invisible@invisible-Aspire-7736:~$ sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-71-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD5000BEVT-22ZAT0
Serial Number:    WD-WXQ0A99J4715
LU WWN Device Id: 5 0014ee 2039148a1
Firmware Version: 01.01A01
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Tue May 17 10:08:38 2016 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (13200) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 154) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x303f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       5339
  3 Spin_Up_Time            0x0027   184   174   021    Pre-fail  Always       -       1766
  4 Start_Stop_Count        0x0032   093   093   000    Old_age   Always       -       7218
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   078   078   000    Old_age   Always       -       16563
10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   093   093   000    Old_age   Always       -       7152
192 Power-Off_Retract_Count 0x0032   199   199   000    Old_age   Always       -       1143
193 Load_Cycle_Count        0x0032   146   146   000    Old_age   Always       -       163048
194 Temperature_Celsius     0x0022   107   080   000    Old_age   Always       -       40
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       2
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

invisible@invisible-Aspire-7736:~$


Κάποια έχουν αυξηθεί. Διατρέχω κάποιον άμεσο κίνδυνο;
1 Ubuntu 16.04 xenial 4.4.0-166-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 10
2 Intel Core2 Duo CPU T6600 2.20GHz ‖ RAM 3946 MiB ‖ Acer JV50 - Acer Aspire 7736
3 nVidia GT218M [GeForce G210M] [10de:0a74] {nouveau}
4 enp2s0: Broadcom Inc. and subsidiaries NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) ⋮ wlp3s0: Intel WiFi Link 5100 [8086:4232]

In a world without fences and walls, who needs Gates and Windows ?

Χαράξεις Site
Άβαταρ μέλους
dgtfeargr
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 653
Εγγραφή: 18 Ιουν 2009, 15:39
Τοποθεσία: /home
Launchpad: dgtfeargr
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 17 Μάιος 2016, 19:46

dgtfeargr έγραψε:Κάποια έχουν αυξηθεί.

Αυξήθηκαν οι ώρες λειτουργίας, πράγμα φυσιολογικό.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Learner » 18 Μάιος 2016, 00:09

dgtfeargr έγραψε:Κάποια έχουν αυξηθεί. Διατρέχω κάποιον άμεσο κίνδυνο;

Θα μπορούσες να αγνοήσεις το Raw_Read_Error_Rate , αλλά φαίνεται ότι άρχισε να μετρά και το Current_Pending_Sector.
Ο συνδυασμός αύξησης αυτών των τιμών συνήθως δεν είναι καλός. Δοκίμασε για αρχή να αλλάξεις καλώδιο σύνδεσης (αγόρασε ένα καινούριο),
αλλά εγώ θα τον είχα υπό παρακολούθηση.
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9765
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό kostas100200 » 04 Οκτ 2016, 23:47

καλησπέρα μήπως μπορειτε να δείτε κ αυτα τα αποτελέσματα του σκληρου μου-εσείς που ξέραιτε καλύτερα;



Κώδικας: Επιλογή όλων
=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST3500418AS
Serial Number:    9VMCL1HW
LU WWN Device Id: 5 000c50 01ffde9b4
Firmware Version: CC38
User Capacity:    500.106.780.160 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Tue Oct  4 22:35:55 2016 EEST

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213891en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (  592) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (  84) minutes.
Conveyance self-test routine
recommended polling time:     (   2) minutes.
SCT capabilities:           (0x103f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   112   099   006    Pre-fail  Always       -       46775598
  3 Spin_Up_Time            0x0003   097   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   095   095   020    Old_age   Always       -       5258
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   081   060   030    Pre-fail  Always       -       147029752
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       6092
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   097   097   020    Old_age   Always       -       3545
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   096   000    Old_age   Always       -       4320
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   065   056   045    Old_age   Always       -       35 (Min/Max 35/36)
194 Temperature_Celsius     0x0022   035   044   000    Old_age   Always       -       35 (0 7 0 0 0)
195 Hardware_ECC_Recovered  0x001a   042   032   000    Old_age   Always       -       46775598
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       9200 (67 91 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       1593136719
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       413393076

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Τελευταία επεξεργασία από the_eye και 05 Οκτ 2016, 00:18, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Τον κώδικα τον βάζουμε σε [code] bbcode
INTEL(R)RENTIUM(R) DCPU 3,40GHZ RAM 3,25GB ΓΡΑΦΙΚΑ NVIDIA GEFORCE 8500 GT WIN-10 UBUNTU 16.04LTS 32bit
(ηλεκτρολογικα ανελκυστηρες-αχαρνες αττικης)
kostas100200
babeTUX
babeTUX
 
Δημοσιεύσεις: 38
Εγγραφή: 04 Απρ 2016, 03:27
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 05 Οκτ 2016, 00:22

Πάρε ένα backup, ο δίσκος δεν είναι σε καλή κατάσταση.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό freefour » 06 Οκτ 2016, 15:24

Μπορεις να ριξεις μια ματια και στους δισκους μου να δω που βρισκονται;
sda:
Κώδικας: Επιλογή όλων
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   136   136   054    Pre-fail  Offline      -       91
  3 Spin_Up_Time            0x0007   127   127   024    Pre-fail  Always       -       180 (Average 182)
  4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       5404
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   113   113   020    Pre-fail  Offline      -       35
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       13466
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       4772
192 Power-Off_Retract_Count 0x0032   095   095   000    Old_age   Always       -       6035
193 Load_Cycle_Count        0x0012   095   095   000    Old_age   Always       -       6035
194 Temperature_Celsius     0x0002   206   206   000    Old_age   Always       -       29 (Min/Max 7/45)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0


sdb:
Κώδικας: Επιλογή όλων
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   134   134   054    Pre-fail  Offline      -       99
  3 Spin_Up_Time            0x0007   126   126   024    Pre-fail  Always       -       182 (Average 182)
  4 Start_Stop_Count        0x0012   099   099   000    Old_age   Always       -       5906
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   110   110   020    Pre-fail  Offline      -       36
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       12991
10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       4677
192 Power-Off_Retract_Count 0x0032   096   096   000    Old_age   Always       -       5961
193 Load_Cycle_Count        0x0012   096   096   000    Old_age   Always       -       5961
194 Temperature_Celsius     0x0002   206   206   000    Old_age   Always       -       29 (Min/Max 6/47)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       1
Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Πρώτα βήματα
‖‖ Ubuntu 19.04 Gnome 3.32.1 ‖ Windows 10 ‖‖
Intel Core i7 CPU 920 2.67GHz RAM 5969 MiB Gigabyte EX58-DS4
NVIDIA Corporation GK104 [GeForce GTX 760]
eth0: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) ⋮ eth1: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Άβαταρ μέλους
freefour
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 559
Εγγραφή: 09 Απρ 2012, 10:32
Τοποθεσία: Κατερινη
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 06 Οκτ 2016, 17:53

Μια χαρά φαίνονται.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό freefour » 07 Οκτ 2016, 12:35

Ευχαριστω.
Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Πρώτα βήματα
‖‖ Ubuntu 19.04 Gnome 3.32.1 ‖ Windows 10 ‖‖
Intel Core i7 CPU 920 2.67GHz RAM 5969 MiB Gigabyte EX58-DS4
NVIDIA Corporation GK104 [GeForce GTX 760]
eth0: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) ⋮ eth1: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Άβαταρ μέλους
freefour
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 559
Εγγραφή: 09 Απρ 2012, 10:32
Τοποθεσία: Κατερινη
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό metfm » 22 Μαρ 2017, 22:48

εμενα μου εβγαλε

Κώδικας: Επιλογή όλων
metfm@metfm:~$ sudo smartctl -a /dev/sda
[sudo] password for metfm:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.8.0-41-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Samsung SpinPoint M8 (AF)
Device Model:     ST500LM012 HN-M500MBB
Serial Number:    S2R7J9EF200771
LU WWN Device Id: 5 0004cf 20c7701dc
Firmware Version: 2AR10002
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Mar 22 21:46:55 2017 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       ( 6300) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 105) minutes.
SCT capabilities:           (0x003f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       189
  2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0
  3 Spin_Up_Time            0x0023   091   082   025    Pre-fail  Always       -       2865
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2823
  5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       5621
10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       115
12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       2821
191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       901
192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0
194 Temperature_Celsius     0x0002   064   051   000    Old_age   Always       -       35 (Min/Max 11/50)
195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0
196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   252   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       32065
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       115
225 Load_Cycle_Count        0x0032   099   099   000    Old_age   Always       -       16804

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%         9         -
# 2  Short offline       Completed without error       00%         4         -

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

metfm@metfm:~$
1 Γνώσεις ⇛ Linux: Mετρια┃ Προγραμματισμός: Ναι ΗΤΜL, CSS ┃ Αγγλικά: Mετρια
2 Ubuntu Μate 18.04
3 laptop HP 630
metfm
babeTUX
babeTUX
 
Δημοσιεύσεις: 92
Εγγραφή: 09 Μαρ 2017, 15:30
Εκτύπωση

ΠροηγούμενηΕπόμενο

Επιστροφή στο Οδηγοί - How to - Tutorials