Συντονιστής: adem1
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 218947232
3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 547
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 13304092
smartctl -v 1,hex48 -v 7,hex48 -a /dev/sdΧ
1 Raw_Read_Error_Rate 0x000f 119 099 006 Pre-fail Always - 0x00000d0cdea0
3 Spin_Up_Time 0x0003 093 093 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 547
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 071 060 030 Pre-fail Always - 0x000000cb015b
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-116-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9250315AS
Serial Number: 5VCD0TP4
LU WWN Device Id: 5 000c50 0219504a0
Firmware Version: 0001SDM1
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Wed Mar 7 22:00:26 2018 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 69) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 108 099 006 Pre-fail Always - 18767957
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3690
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 156225627
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13804
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 037 020 Old_age Always - 3689
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 3503
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 057 041 045 Old_age Always In_the_past 43 (Min/Max 21/43 #490)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 67
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 130
193 Load_Cycle_Count 0x0032 002 002 000 Old_age Always - 197359
194 Temperature_Celsius 0x0022 043 059 000 Old_age Always - 43 (0 11 0 0 0)
195 Hardware_ECC_Recovered 0x001a 049 041 000 Old_age Always - 18767957
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
3 ποστ παραπάνω έγραψα κάτι (viewtopic.php?f=9&t=19749&p=342937#p342871) για τους δίσκους Seagate, τρέξε την παρακάτω εντολή αντικαθιστόντας το Χ με το πραγματικό γράμα του δίσκου σου(μαλλον a) και βάλε εδώ τα αποτελέσματαBEGINER001 έγραψε:Ο λογος που το ψαχνω ειναι οτι τον τελευταιο 1,5 μηνα παρατηρω τεραστιες καθυστερησεις τοσο στην εκκινηση αλλα και στις εφαρμογες. Ειδικα ο firefox θελει 35 sec να φορτωσει. Με λιγα λογια το λινουξ εγινε ΤΡΟΜΕΡΑ ΑΡΓΟ.
Πως το βλεπετε να αλλαξω laptop?
sudo smartctl -v 1,hex48 -v 7,hex48 -a /dev/sdΧ
δεν ειναι bug απλα μεταφράζει αλλιώς τα αποτελέσματα, στο κάτω κάτω δε μπορεί να μη γνωρίζουνthe_eye έγραψε:Καλό είναι να δηλωθεί ως bug στο πακέτο smartctl, αν είναι. Γιατί εκεί πρέπει να φτιαχτεί, για να βγάζει σωστά δεδομένα.
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-116-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.6
Device Model: ST9250315AS
Serial Number: 5VCD0TP4
LU WWN Device Id: 5 000c50 0219504a0
Firmware Version: 0001SDM1
User Capacity: 250.059.350.016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Thu Mar 8 08:57:50 2018 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 69) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 111 099 006 Pre-fail Always - 0x000001f47cdb
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 097 097 020 Old_age Always - 3691
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 0x000009502f1a
9 Power_On_Hours 0x0032 085 085 000 Old_age Always - 13807
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 097 037 020 Old_age Always - 3690
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 3504
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 070 041 045 Old_age Always In_the_past 30 (1 234 30 20 0)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 67
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 130
193 Load_Cycle_Count 0x0032 002 002 000 Old_age Always - 197360
194 Temperature_Celsius 0x0022 030 059 000 Old_age Always - 30 (0 11 0 0 0)
195 Hardware_ECC_Recovered 0x001a 049 041 000 Old_age Always - 32799963
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
188 Command_Timeout 0x0032 100 096 000 Old_age Always - 3504
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 67
195 Hardware_ECC_Recovered 0x001a 049 041 000 Old_age Always - 32799963