Έλεγχος σκληρού δίσκου Hardware

...το μέρος για να ξεκινήσετε!

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Παρακαλώ να επιλέξετε, με προσοχή, την άδεια που θέλετε να έχουν οι οδηγοί που συγγράφετε.
Πληροφορίες για τις άδειες μπορείτε να βρείτε εδώ.
Άμα επιθυμείτε κάποια άλλη άδεια επικοινωνήστε με κάποιο Διαχειριστή είτε Συντονιστή.

Σημαντικό είναι να χρησιμοποιήσετε την υπηρεσία http://imagebin.ubuntu-gr.org για τις εικόνες.

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 10 Μάιος 2014, 11:10

qsd330 έγραψε:να φανταστω οι δικοι μου hdd την εζεισαν την ζωη τους??

Ναι, έτσι δείχνουν.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11672
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό dgtfeargr » 14 Μάιος 2014, 23:30

Aυτά είναι τα αποτελέσματα ένα χρόνο και 3 μήνες πριν:

dgtfeargr έγραψε:Ο Δίσκος του λάπτοπ:

Κώδικας: Επιλογή όλων
invisible@invisible-Aspire-7736:~$ sudo smartctl -a /dev/sda
[sudo] password for invisible:
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.5.0-22-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD5000BEVT-22ZAT0
Serial Number:    WD-WXQ0A99J4715
LU WWN Device Id: 5 0014ee 2039148a1
Firmware Version: 01.01A01
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Jan 27 19:11:38 2013 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (13200) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 154) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x303f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       3721
  3 Spin_Up_Time            0x0027   185   176   021    Pre-fail  Always       -       1725
  4 Start_Stop_Count        0x0032   097   097   000    Old_age   Always       -       3618
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       6828
10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   097   097   000    Old_age   Always       -       3556
192 Power-Off_Retract_Count 0x0032   199   199   000    Old_age   Always       -       854
193 Load_Cycle_Count        0x0032   151   151   000    Old_age   Always       -       149242
194 Temperature_Celsius     0x0022   114   080   000    Old_age   Always       -       33
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

invisible@invisible-Aspire-7736:~$



και αυτά είναι τώρα:

Κώδικας: Επιλογή όλων
invisible@invisible-Aspire-7736:~$ sudo smartctl -a /dev/sda
[sudo] password for invisible:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Scorpio Blue Serial ATA
Device Model:     WDC WD5000BEVT-22ZAT0
Serial Number:    WD-WXQ0A99J4715
LU WWN Device Id: 5 0014ee 2039148a1
Firmware Version: 01.01A01
User Capacity:    500.107.862.016 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed May 14 23:26:46 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (13200) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 154) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x303f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       4038
  3 Spin_Up_Time            0x0027   184   174   021    Pre-fail  Always       -       1791
  4 Start_Stop_Count        0x0032   095   095   000    Old_age   Always       -       5009
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       10669
10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   096   096   000    Old_age   Always       -       4943
192 Power-Off_Retract_Count 0x0032   199   199   000    Old_age   Always       -       1011
193 Load_Cycle_Count        0x0032   149   149   000    Old_age   Always       -       153063
194 Temperature_Celsius     0x0022   090   080   000    Old_age   Always       -       57
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

invisible@invisible-Aspire-7736:~$


πρέπει να ανησυχώ; γιατί μερικές τιμές αυξήθηκαν
1 Ubuntu 16.04 xenial 4.4.0-166-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 10
2 Intel Core2 Duo CPU T6600 2.20GHz ‖ RAM 3946 MiB ‖ Acer JV50 - Acer Aspire 7736
3 nVidia GT218M [GeForce G210M] [10de:0a74] {nouveau}
4 enp2s0: Broadcom Inc. and subsidiaries NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) ⋮ wlp3s0: Intel WiFi Link 5100 [8086:4232]

In a world without fences and walls, who needs Gates and Windows ?

Χαράξεις Site
Άβαταρ μέλους
dgtfeargr
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 653
Εγγραφή: 18 Ιουν 2009, 15:39
Τοποθεσία: /home
Launchpad: dgtfeargr
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Learner » 14 Μάιος 2014, 23:56

dgtfeargr έγραψε:πρέπει να ανησυχώ; γιατί μερικές τιμές αυξήθηκαν

Ορισμένες τιμές είναι λογικό να αυξάνονται με την πάροδο του χρόνου. Αυτό που θα ανησυχούσε εμένα είναι η θερμοκρασία. Πως από 33 έχει φτάσει στους 57 βαθμούς;
Κατά τα άλλα φαίνεται (σχετικά) εντάξει ο δίσκος.
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9765
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 15 Μάιος 2014, 01:56

Learner έγραψε:Πως από 33 έχει φτάσει στους 57 βαθμούς;

Θέλει ένα καθαρισματάκι από σκόνες το laptop !!!
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11672
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό dgtfeargr » 19 Μάιος 2014, 23:27

the_eye έγραψε:
Learner έγραψε:Πως από 33 έχει φτάσει στους 57 βαθμούς;

Θέλει ένα καθαρισματάκι από σκόνες το laptop !!!


Μερικές φορές φτάνει και 60 με 62. Γενικά αν μείνει πάνω απο 4-5 ώρες ανοικτός ή τρέχει Flash σε ιστοσελίδες ανεβαίνει η θερμοκρασία του σκληρού αρκετά. Αυτό γενικά παρατηρείτε στους Acer με τη θερμοκρασία, πιθανώς λόγο υλικών και σκόνης. Οπότε καθαρισματάκι να το επιχειρήσω μόνος ή να το πάω σε κάποιο μαγαζί;
1 Ubuntu 16.04 xenial 4.4.0-166-generic 64bit (el_GR.UTF-8, Unity ubuntu), Windows 10
2 Intel Core2 Duo CPU T6600 2.20GHz ‖ RAM 3946 MiB ‖ Acer JV50 - Acer Aspire 7736
3 nVidia GT218M [GeForce G210M] [10de:0a74] {nouveau}
4 enp2s0: Broadcom Inc. and subsidiaries NetLink BCM5784M Gigabit Ethernet PCIe [14e4:1698] (rev 10) ⋮ wlp3s0: Intel WiFi Link 5100 [8086:4232]

In a world without fences and walls, who needs Gates and Windows ?

Χαράξεις Site
Άβαταρ μέλους
dgtfeargr
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 653
Εγγραφή: 18 Ιουν 2009, 15:39
Τοποθεσία: /home
Launchpad: dgtfeargr
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 20 Μάιος 2014, 01:09

Αν πιάνει το χέρι σου, θέλει πεπιεσμένο αέρα στους αεραγωγούς για να πετάξει τις σκόνες.
Μην δοκιμάσεις με σεσουάρ, δεν κάνει.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11672
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό lepidas » 26 Μάιος 2014, 08:38

μια μικρή βοήθεια για να σιγουρευτώ οτι οι δίσκοι πάνε για αλλαγή παρακαλω, sda και sdb

Κώδικας: Επιλογή όλων
sudo smartctl -a /dev/sda
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-9YN166
Serial Number:    Z1F15G6S
LU WWN Device Id: 5 000c50 04e4699d2
Firmware Version: CC4B
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon May 26 08:32:54 2014 EEST

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (  584) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     ( 352) minutes.
Conveyance self-test routine
recommended polling time:     (   2) minutes.
SCT capabilities:           (0x3085)   SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   116   093   006    Pre-fail  Always       -       106101152
  3 Spin_Up_Time            0x0003   093   093   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       15
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       8
  7 Seek_Error_Rate         0x000f   081   060   030    Pre-fail  Always       -       143463162
  9 Power_On_Hours          0x0032   091   091   000    Old_age   Always       -       8439
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       15
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       2060
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0 0 0
189 High_Fly_Writes         0x003a   098   098   000    Old_age   Always       -       2
190 Airflow_Temperature_Cel 0x0022   067   052   045    Old_age   Always       -       33 (Min/Max 32/35)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       9
193 Load_Cycle_Count        0x0032   077   077   000    Old_age   Always       -       46895
194 Temperature_Celsius     0x0022   033   048   000    Old_age   Always       -       33 (0 18 0 0 0)
197 Current_Pending_Sector  0x0012   100   001   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   001   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       6924h+51m+41.940s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       278506363319203
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       63036076050996

SMART Error Log Version: 1
ATA Error Count: 2060 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2060 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   6d+23:28:32.109  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   6d+23:28:32.108  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00   6d+23:28:32.108  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00   6d+23:28:32.108  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00   6d+23:28:32.107  IDENTIFY DEVICE

Error 2059 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   6d+23:28:29.233  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   6d+23:28:29.233  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00   6d+23:28:29.232  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00   6d+23:28:29.232  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00   6d+23:28:29.232  IDENTIFY DEVICE

Error 2058 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   6d+23:28:26.349  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   6d+23:28:26.349  READ FPDMA QUEUED
  60 00 00 ff ff ff 4f 00   6d+23:28:26.349  READ FPDMA QUEUED
  60 00 80 ff ff ff 4f 00   6d+23:28:26.348  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00   6d+23:28:26.348  SET FEATURES [Enable SATA feature]

Error 2057 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   6d+23:28:23.456  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00   6d+23:28:23.456  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00   6d+23:28:23.456  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00   6d+23:28:23.456  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   6d+23:28:23.456  SET FEATURES [Set transfer mode]

Error 2056 occurred at disk power-on lifetime: 5089 hours (212 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 ff ff ff 4f 00   6d+23:28:20.581  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00   6d+23:28:20.581  SET FEATURES [Enable SATA feature]
  27 00 00 00 00 00 e0 00   6d+23:28:20.581  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  ec 00 00 00 00 00 a0 00   6d+23:28:20.580  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   6d+23:28:20.580  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      6532         -
# 2  Extended offline    Completed without error       00%      6502         -
# 3  Extended offline    Completed without error       00%      5165         -
# 4  Extended offline    Completed without error       00%         5         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Κώδικας: Επιλογή όλων
sudo smartctl -a /dev/sdb
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-24-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.14 (AF)
Device Model:     ST3000DM001-1CH166
Serial Number:    Z1F0Z1FL
LU WWN Device Id: 5 000c50 04dffbbcb
Firmware Version: CC43
User Capacity:    3,000,592,982,016 bytes [3.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon May 26 08:37:44 2014 EEST

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/223651en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (  584) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     ( 328) minutes.
Conveyance self-test routine
recommended polling time:     (   2) minutes.
SCT capabilities:           (0x3085)   SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       145310616
  3 Spin_Up_Time            0x0003   091   091   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       21
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       40
  7 Seek_Error_Rate         0x000f   053   051   030    Pre-fail  Always       -       1898462924882
  9 Power_On_Hours          0x0032   087   087   000    Old_age   Always       -       11931
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       21
183 Runtime_Bad_Block       0x0032   099   099   000    Old_age   Always       -       1
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   097   097   000    Old_age   Always       -       3
188 Command_Timeout         0x0032   100   098   000    Old_age   Always       -       2 2 2
189 High_Fly_Writes         0x003a   028   028   000    Old_age   Always       -       72
190 Airflow_Temperature_Cel 0x0022   066   055   045    Old_age   Always       -       34 (Min/Max 33/37)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       19
193 Load_Cycle_Count        0x0032   083   083   000    Old_age   Always       -       35641
194 Temperature_Celsius     0x0022   034   045   000    Old_age   Always       -       34 (0 21 0 0 0)
197 Current_Pending_Sector  0x0012   100   032   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   032   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       11912h+29m+01.926s
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       116064681029
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       326236248135

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     10025         -
# 2  Extended offline    Completed without error       00%      9996         -
# 3  Extended offline    Completed without error       00%      9629         -
# 4  Extended offline    Completed without error       00%        50         -
# 5  Extended offline    Completed without error       00%         6         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Άβαταρ μέλους
lepidas
superbTUX
superbTUX
 
Δημοσιεύσεις: 3326
Εγγραφή: 11 Μάιος 2011, 11:10
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Learner » 26 Μάιος 2014, 11:21

Δεν νομίζω ότι είναι για πέταμα οι δίσκοι. Έχουν κάποια λάθη, θέλουν προσοχή, αλλά μπορείς να τους δουλέψεις ακόμη. Μην νομίζεις ότι το 40 reallocated sectors είναι σημαντική τιμή για έναν δίσκο 3TB.
Απλά παρακολούθα/σύγκρινε τις τιμές ανά μήνα να δεις κατά πόσο αυξάνονται. Έχω δίσκο 1TB με χειρότερες τιμές από αυτές που βλέπω εδώ και τον δουλεύω ακόμη και με λειτουργικό σύστημα. Ναι, κάποια στιγμή θα τα παίξει το ξέρω (έχω πάρει τα backup μου), αλλά μέχρι τότε, δουλεύει μια χαρά.
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9765
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό George Pantelis » 26 Μάιος 2014, 11:33

Τα φώτα σας και την βοήθειά σας και για μένα παρακαλώ (μου βγάζει 4 errors). Τί συμβαίνει;
Κώδικας: Επιλογή όλων
george@george:~$ sudo smartctl -a /dev/sda
[sudo] password for george:
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-27-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MK..37GSX
Device Model:     TOSHIBA MK1637GSX
Serial Number:    387FT312T
Firmware Version: DL030G
User Capacity:    160.041.885.696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
Local Time is:    Mon May 26 11:04:53 2014 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (  120) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     (  92) minutes.
SCT capabilities:           (0x0001)   SCT Status supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1686
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       3573
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       479
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   030   030   000    Old_age   Always       -       28079
10 Spin_Retry_Count        0x0033   171   100   030    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       3535
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       237
193 Load_Cycle_Count        0x0032   093   093   000    Old_age   Always       -       71233
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       45 (Min/Max 9/62)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       443
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       8348
222 Loaded_Hours            0x0032   034   034   000    Old_age   Always       -       26508
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       293
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 4
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4 occurred at disk power-on lifetime: 18275 hours (761 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 02 35 87 5e e0  Error: UNC 2 sectors at LBA = 0x005e8735 = 6194997

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 87 5e e0 00      00:00:50.632  READ DMA EXT
  25 00 08 2f 87 5e e0 00      00:00:47.098  READ DMA EXT
  25 00 08 2f 87 5e e0 00      00:00:43.576  READ DMA EXT
  25 00 08 2f 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 27 87 5e e0 00      00:00:36.535  READ DMA EXT

Error 3 occurred at disk power-on lifetime: 18275 hours (761 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 02 35 87 5e e0  Error: UNC 2 sectors at LBA = 0x005e8735 = 6194997

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 87 5e e0 00      00:00:47.098  READ DMA EXT
  25 00 08 2f 87 5e e0 00      00:00:43.576  READ DMA EXT
  25 00 08 2f 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 27 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 1f 87 5e e0 00      00:00:36.535  READ DMA EXT

Error 2 occurred at disk power-on lifetime: 18275 hours (761 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 02 35 87 5e e0  Error: UNC 2 sectors at LBA = 0x005e8735 = 6194997

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 87 5e e0 00      00:00:43.576  READ DMA EXT
  25 00 08 2f 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 27 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 1f 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 17 87 5e e0 00      00:00:36.535  READ DMA EXT

Error 1 occurred at disk power-on lifetime: 18275 hours (761 days + 11 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 02 35 87 5e e0  Error: UNC 2 sectors at LBA = 0x005e8735 = 6194997

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 2f 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 27 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 1f 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 17 87 5e e0 00      00:00:36.535  READ DMA EXT
  25 00 08 0f 87 5e e0 00      00:00:36.535  READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

george@george:~$
1 Γνώσεις Linux: Μέτριες ┃ Προγραμματισμού: Οχι ┃ Αγγλικών: Αριστο
2 EndeavourOS KDE plasma / Gnome, Ubuntu 22.04 5.15.0-30-generic 64bit (el_GR.UTF-8,Gnome ubuntu), Arch linux (VM)
3 Intel Core2 Duo CPU P8400 2.26GHz ‖ RAM 3908 MiB ‖ Dell Inc. 0F328M - Dell Inc. Latitude E6500
4 Intel Mobile 4 Series Chipset Integrated Graphics [8086:2a42] {i915
5 eth0: Intel 82567LM Gigabit Network Connection [8086:10f5] (rev 03) ⋮ wlan0: Intel WiFi Link 5100 [8086:4232]
Άβαταρ μέλους
George Pantelis
daemonTUX
daemonTUX
 
Δημοσιεύσεις: 977
Εγγραφή: 23 Νοέμ 2013, 19:24
Τοποθεσία: Xαλκίδα
Launchpad: George Pantelis
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Learner » 26 Μάιος 2014, 11:59

George Pantelis έγραψε:Τα φώτα σας και την βοήθειά σας και για μένα παρακαλώ (μου βγάζει 4 errors). Τί συμβαίνει;

Εσύ φαίνεται να έχεις πιο σοβαρό πρόβλημα.
George Pantelis έγραψε:
Κώδικας: Επιλογή όλων
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       479
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       443

άρχισε η κάτω βόλτα. Κάποια στιγμή (και ίσως σύντομα, απ' ότι βλέπω από τις τιμές) θα εξαντληθούν οι τομείς που μπορούν να επανατοποθετηθούν και τότε...πάπαλα ο δίσκος.

Στην θέση σου, θα έψαχνα για δίσκο επί τόπου.
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9765
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

ΠροηγούμενηΕπόμενο

Επιστροφή στο Οδηγοί - How to - Tutorials