lspci -nn
dmesg
Λειτουργικό: Ubuntu 10.04 lucid 64-bit | Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560 |
Κάρτα γραφικών: ATI Device [1002:68c0] | Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) |
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 02)
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 02)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 1 [8086:3a40]
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 5 [8086:3a48]
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 6 [8086:3a4a]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller [8086:3a20]
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller [8086:3a26]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770 [Radeon HD 4850] [1002:9442]
01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30]
02:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2)
05:02.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
05:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70)
[ 1.983065] Freeing unused kernel memory: 544k freed
[ 1.983266] Write protecting the kernel text: 4584k
[ 1.983294] Write protecting the kernel read-only data: 1840k
[ 2.053803] Linux agpgart interface v0.103
[ 2.093580] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.095408] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.095416] ATL1E 0000:02:00.0: setting latency timer to 64
[ 2.114656] Initializing USB Mass Storage driver...
[ 2.114724] scsi6 : SCSI emulation for USB Mass Storage devices
[ 2.116966] usb-storage: device found at 2
[ 2.116967] usb-storage: waiting for device to settle before scanning
[ 2.116986] scsi7 : SCSI emulation for USB Mass Storage devices
[ 2.117062] usbcore: registered new interface driver usb-storage
[ 2.117063] USB Mass Storage support registered.
[ 2.117160] usb-storage: device found at 4
[ 2.117161] usb-storage: waiting for device to settle before scanning
[ 2.137673] usb 6-2: configuration #1 chosen from 1 choice
[ 2.150539] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febfe000-febfe7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 2.175905] usbcore: registered new interface driver hiddev
[ 2.189667] generic-usb 0003:0665:5161.0001: hiddev96,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.0-2/input0
[ 2.189682] usbcore: registered new interface driver usbhid
[ 2.189685] usbhid: v2.6:USB HID core driver
[ 2.412511] usb 7-2: new full speed USB device using uhci_hcd and address 2
[ 2.610767] usb 7-2: configuration #1 chosen from 1 choice
[ 2.852008] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 2.916041] PM: Starting manual resume from disk
[ 2.916043] PM: Resume from partition 8:3
[ 2.916045] PM: Checking hibernation image.
[ 2.916197] PM: Resume from disk failed.
[ 2.956475] kjournald starting. Commit interval 5 seconds
[ 2.956482] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.036905] usb 8-1: configuration #1 chosen from 1 choice
[ 3.056075] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[ 3.056120] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input0
[ 3.146833] microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[ 3.194973] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[ 3.195032] microsoft 0003:045E:00F9.0003: input,hidraw2: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input1
[ 3.428579] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00015fd8da]
[ 3.534781] type=1505 audit(1271089131.215:2): operation="profile_load" pid=467 name=/usr/share/gdm/guest-session/Xsession
[ 3.547631] type=1505 audit(1271089131.227:3): operation="profile_load" pid=468 name=/sbin/dhclient3
[ 3.548216] type=1505 audit(1271089131.227:4): operation="profile_load" pid=468 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.548477] type=1505 audit(1271089131.227:5): operation="profile_load" pid=468 name=/usr/lib/connman/scripts/dhclient-script
[ 3.569945] type=1505 audit(1271089131.251:6): operation="profile_load" pid=469 name=/usr/bin/evince
[ 3.577627] type=1505 audit(1271089131.259:7): operation="profile_load" pid=469 name=/usr/bin/evince-previewer
[ 3.582171] type=1505 audit(1271089131.263:8): operation="profile_load" pid=469 name=/usr/bin/evince-thumbnailer
[ 3.598662] type=1505 audit(1271089131.279:9): operation="profile_load" pid=471 name=/usr/lib/cups/backend/cups-pdf
[ 3.599315] type=1505 audit(1271089131.279:10): operation="profile_load" pid=471 name=/usr/sbin/cupsd
[ 7.116182] usb-storage: device scan complete
[ 7.116288] usb-storage: device scan complete
[ 7.118802] scsi 7:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2
[ 7.151548] scsi 6:0:0:0: Direct-Access WD 2500JB External 0107 PQ: 0 ANSI: 0
[ 7.151827] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 7.151907] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 7.152405] sd 6:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 7.153278] sd 6:0:0:0: [sdb] Write Protect is off
[ 7.153281] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 7.153283] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.154651] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.154654] sdb: sdb1
[ 7.156902] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 7.156905] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 7.158275] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 13.914840] udev: starting version 147
[ 13.929395] Adding 2562356k swap on /dev/sda3. Priority:-1 extents:1 across:2562356k
[ 13.972723] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084A
[ 13.972740] usbcore: registered new interface driver usblp
[ 13.990864] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 13.990867] Disabling lock debugging due to kernel taint
[ 14.038330] EXT3 FS on sda2, internal journal
[ 14.047075] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[ 14.047250] [fglrx] vendor: 1002 device: 9442 count: 1
[ 14.047570] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 14.047581] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.047585] pci 0000:01:00.0: setting latency timer to 64
[ 14.047753] [fglrx] Kernel PAT support is enabled
[ 14.047769] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors
[ 14.058428] Linux video capture interface: v2.00
[ 14.065691] gspca: main v2.6.0 registered
[ 14.066322] gspca: probing 046d:08ad
[ 14.078564] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.081642] lp: driver loaded but no devices found
[ 14.090988] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 14.091025] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.091030] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[ 14.091035] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[ 14.091048] saa7133[0]: board init: gpio is 600e000
[ 14.091054] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 14.116436] alloc irq_desc for 22 on node -1
[ 14.116439] alloc kstat_irqs on node -1
[ 14.116443] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.116464] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.187607] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 14.190228] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.190250] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 14.240508] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 14.240520] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[ 14.240530] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[ 14.240541] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[ 14.240551] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240562] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240572] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240582] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240593] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240603] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240613] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240624] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240634] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240644] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240654] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240670] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.240678] i2c-adapter i2c-0: Invalid 7-bit address 0x7a
[ 14.300583] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[ 14.380519] tda829x 0-004b: setting tuner address to 61
[ 14.427399] __ratelimit: 3 callbacks suppressed
[ 14.427402] type=1505 audit(1271078342.107:12): operation="profile_replace" pid=960 name=/usr/share/gdm/guest-session/Xsession
[ 14.428488] type=1505 audit(1271078342.111:13): operation="profile_replace" pid=961 name=/sbin/dhclient3
[ 14.429012] type=1505 audit(1271078342.111:14): operation="profile_replace" pid=961 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 14.429278] type=1505 audit(1271078342.111:15): operation="profile_replace" pid=961 name=/usr/lib/connman/scripts/dhclient-script
[ 14.431685] type=1505 audit(1271078342.111:16): operation="profile_replace" pid=962 name=/usr/bin/evince
[ 14.439533] type=1505 audit(1271078342.119:17): operation="profile_replace" pid=962 name=/usr/bin/evince-previewer
[ 14.444886] type=1505 audit(1271078342.127:18): operation="profile_replace" pid=962 name=/usr/bin/evince-thumbnailer
[ 14.448508] tda829x 0-004b: type set to tda8290+75a
[ 14.450932] type=1505 audit(1271078342.131:19): operation="profile_replace" pid=964 name=/usr/lib/cups/backend/cups-pdf
[ 14.451493] type=1505 audit(1271078342.131:20): operation="profile_replace" pid=964 name=/usr/sbin/cupsd
[ 14.453040] type=1505 audit(1271078342.135:21): operation="profile_replace" pid=965 name=/usr/sbin/tcpdump
[ 14.595802] alloc irq_desc for 28 on node -1
[ 14.595805] alloc kstat_irqs on node -1
[ 14.595817] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
[ 14.596024] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.596160] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 14.596278] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.935830] ppdev: user-space parallel port driver
[ 15.839909] zc3xx: probe 2wr ov vga 0x0000
[ 15.883906] zc3xx: probe sensor -> 0011
[ 15.883908] zc3xx: Find Sensor HV7131R(c)
[ 15.887960] gspca: probe ok
[ 15.887988] gspca: probing 046d:08ad
[ 15.888100] gspca: probing 046d:08ad
[ 15.888118] usbcore: registered new interface driver zc3xx
[ 15.888120] zc3xx: registered
[ 15.889146] usb 2-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 15.923192] usbcore: registered new interface driver snd-usb-audio
[ 18.305870] input: i2c IR (Pinnacle PCTV) as /devices/virtual/input/input6
[ 18.305907] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-0/0-0047/ir0 [saa7133[0]]
[ 18.368044] saa7133[0]: registered device video1 [v4l2]
[ 18.368070] saa7133[0]: registered device vbi0
[ 18.368092] saa7133[0]: registered device radio0
[ 18.371186] saa7134 ALSA driver for DMA sound loaded
[ 18.371194] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 18.371208] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[ 18.415362] dvb_init() allocating 1 frontend
[ 18.580080] DVB: registering new adapter (saa7133[0])
[ 18.580084] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 18.812007] tda1004x: setting up plls for 48MHz sampling clock
[ 19.096006] tda1004x: found firmware revision 29 -- ok
[ 21.281762] alloc irq_desc for 29 on node -1
[ 21.281764] alloc kstat_irqs on node -1
[ 21.281773] fglrx_pci 0000:01:00.0: irq 29 for MSI/MSI-X
[ 21.282179] [fglrx] Firegl kernel thread PID: 1669
[ 22.893997] [fglrx] Gart USWC size:627 M.
[ 22.894000] [fglrx] Gart cacheable size:247 M.
[ 22.894003] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 22.894005] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[ 22.894007] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 22.920014] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[ 23.134244] CPU0 attaching NULL sched-domain.
[ 23.134248] CPU1 attaching NULL sched-domain.
[ 23.152039] CPU0 attaching sched-domain:
[ 23.152041] domain 0: span 0-1 level MC
[ 23.152043] groups: 0 1
[ 23.152046] domain 1: span 0-1 level CPU
[ 23.152048] groups: 0-1 (__cpu_power = 2048)
[ 23.152051] CPU1 attaching sched-domain:
[ 23.152053] domain 0: span 0-1 level MC
[ 23.152054] groups: 1 0
[ 23.152057] domain 1: span 0-1 level CPU
[ 23.152058] groups: 0-1 (__cpu_power = 2048)
[ 24.676521] eth0: no IPv6 routers present
[ 25.712555] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 31.936009] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[ 32.122404] CPU0 attaching NULL sched-domain.
[ 32.122407] CPU1 attaching NULL sched-domain.
[ 32.140540] CPU0 attaching sched-domain:
[ 32.140543] domain 0: span 0-1 level MC
[ 32.140545] groups: 0 1
[ 32.140548] CPU1 attaching sched-domain:
[ 32.140550] domain 0: span 0-1 level MC
[ 32.140551] groups: 1 0
[ 532.860009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[ 532.968006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[ 827.636014] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 827.954109] usb 1-2: configuration #1 chosen from 1 choice
[ 828.044037] cfg80211: Calling CRDA to update world regulatory domain
[ 828.142481] cfg80211: World regulatory domain updated:
[ 828.142483] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 828.142485] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 828.142487] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 828.142489] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 828.142491] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 828.142492] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 828.454955] phy0: Selected rate control algorithm 'minstrel'
[ 828.455428] Registered led device: rt73usb-phy0::radio
[ 828.455439] Registered led device: rt73usb-phy0::assoc
[ 828.455451] Registered led device: rt73usb-phy0::quality
[ 828.455875] usbcore: registered new interface driver rt73usb
[ 828.522818] rt73usb 1-2:1.0: firmware: requesting rt73.bin
[ 828.655487] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 960.836197] wlan0: authenticate with AP 00:1f:9f:d4:1e:77
[ 961.036012] wlan0: authenticate with AP 00:1f:9f:d4:1e:77
[ 961.042076] wlan0: authenticated
[ 961.042079] wlan0: associate with AP 00:1f:9f:d4:1e:77
[ 961.240009] wlan0: associate with AP 00:1f:9f:d4:1e:77
[ 961.440511] wlan0: associate with AP 00:1f:9f:d4:1e:77
[ 961.449549] wlan0: RX AssocResp from 00:1f:9f:d4:1e:77 (capab=0x401 status=0 aid=1)
[ 961.449552] wlan0: associated
[ 961.463045] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 971.856005] wlan0: no IPv6 routers present
[ 981.688017] wlan0: no probe response from AP 00:1f:9f:d4:1e:77 - disassociating
[ 983.166567] wlan0: authenticate with AP 00:1f:9f:d4:1e:77
[ 983.168470] wlan0: authenticated
[ 983.168474] wlan0: associate with AP 00:1f:9f:d4:1e:77
[ 983.170951] wlan0: RX ReassocResp from 00:1f:9f:d4:1e:77 (capab=0x401 status=0 aid=1)
[ 983.170954] wlan0: associated
[ 1086.280870] wlan0: disassociating by local choice (reason=3)
[ 1100.701102] usb 1-2: USB disconnect, address 2
[ 1100.701296] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 1100.701300] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 1100.701302] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 1100.701305] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 1100.701307] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 1100.701312] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1100.701373] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1100.701390] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 1100.701408] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 2168.828006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[ 2168.936007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[ 3932.796007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[ 3932.904006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[ 4432.788007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[ 4432.896005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[ 7582.064012] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 7582.382050] usb 1-2: configuration #1 chosen from 1 choice
[ 7582.645690] phy1: Selected rate control algorithm 'minstrel'
[ 7582.646174] Registered led device: rt73usb-phy1::radio
[ 7582.646185] Registered led device: rt73usb-phy1::assoc
[ 7582.646196] Registered led device: rt73usb-phy1::quality
[ 7582.663015] udev: renamed network interface wlan0 to wlan1
[ 7582.665429] rt73usb 1-2:1.0: firmware: requesting rt73.bin
[ 7582.758879] ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 7686.075067] wlan1: authenticate with AP 00:1f:9f:d4:1e:77
[ 7686.272010] wlan1: authenticate with AP 00:1f:9f:d4:1e:77
[ 7686.437799] wlan1: authenticated
[ 7686.437802] wlan1: associate with AP 00:1f:9f:d4:1e:77
[ 7686.636009] wlan1: associate with AP 00:1f:9f:d4:1e:77
[ 7686.836009] wlan1: associate with AP 00:1f:9f:d4:1e:77
[ 7686.995142] wlan1: RX AssocResp from 00:1f:9f:d4:1e:77 (capab=0x401 status=0 aid=1)
[ 7686.995146] wlan1: associated
[ 7687.016812] ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 7698.008005] wlan1: no IPv6 routers present
[ 7832.070504] wlan1: disassociating by local choice (reason=3)
[ 7843.737086] usb 1-2: USB disconnect, address 3
[ 7843.737283] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[ 7843.737288] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[ 7843.737292] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[ 7843.737296] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[ 7843.737300] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.
[ 7843.737307] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 7843.737379] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 7843.737403] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 7843.737429] phy1 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[ 9150.960016] usb 1-2: new high speed USB device using ehci_hcd and address 4
[ 9151.094452] usb 1-2: configuration #1 chosen from 1 choice
[ 9151.096327] scsi8 : SCSI emulation for USB Mass Storage devices
[ 9151.096407] usb-storage: device found at 4
[ 9151.096408] usb-storage: waiting for device to settle before scanning
[ 9156.096712] usb-storage: device scan complete
[ 9156.097203] scsi 8:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
[ 9156.097774] scsi 8:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
[ 9156.098092] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 9156.118066] sd 8:0:0:0: [sdd] 8015502 512-byte logical blocks: (4.10 GB/3.82 GiB)
[ 9156.119555] sd 8:0:0:0: [sdd] Write Protect is off
[ 9156.119557] sd 8:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 9156.119559] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 9156.121188] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 9156.121270] sr 8:0:0:1: Attached scsi CD-ROM sr1
[ 9156.121332] sr 8:0:0:1: Attached scsi generic sg5 type 5
[ 9156.129179] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 9156.129184] sdd: sdd1
[ 9156.136436] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 9156.136441] sd 8:0:0:0: [sdd] Attached SCSI removable disk
[ 9156.318882] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 9156.346628] ISOFS: changing to secondary root
[11314.388019] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[11314.496011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[11390.113154] usb 2-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[11420.321890] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[11420.323931] SGI XFS Quota Management subsystem
[11420.341845] JFS: nTxBlock = 8192, nTxLock = 65536
[11420.364120] NTFS driver 2.1.29 [Flags: R/O MODULE].
[11420.390734] QNX4 filesystem 0.2.3 registered.
[12130.372011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[12130.480006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[13131.352011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[13131.460012] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[14848.320010] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[14848.428008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[15965.296012] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[15965.404009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[18090.256028] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[18090.364199] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[22355.176010] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[22355.284010] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[25114.124007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[25114.232005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[25873.112009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[25873.220005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[26514.096025] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[26514.204006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[28214.064011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[28214.172011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[29863.100516] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[30171.028020] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[30171.136011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[30705.016008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[30705.124005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[33257.964008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[33258.072005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[35799.916009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[35800.024005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[37806.880007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[37806.988006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[38323.872008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[38323.980006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[41325.812009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[41325.920005] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[43186.780007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[43186.888022] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[47818.692011] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[47818.800007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[50724.632008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[50724.740007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[51652.616025] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[51652.724007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[53716.576008] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[53716.684006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[54993.552007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[54993.660007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[59885.460009] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[59885.568006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[62998.400006] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[62998.508007] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[65619.356013] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=1
[65619.464012] i2c IR (Pinnacle PCTV): unknown key: key=0x19 raw=0x19 down=0
[66395.299375] zc3xx: probe 2wr ov vga 0x0000
[66397.427242] zc3xx: probe 2wr ov vga 0x0000
[66399.659110] zc3xx: probe 2wr ov vga 0x0000
[66401.887969] zc3xx: probe 2wr ov vga 0x0000
[66404.091837] zc3xx: probe 2wr ov vga 0x0000
[66406.323694] zc3xx: probe 2wr ov vga 0x0000
[66408.555558] zc3xx: probe 2wr ov vga 0x0000
[66410.823418] zc3xx: probe 2wr ov vga 0x0000
[66413.047280] zc3xx: probe 2wr ov vga 0x0000
[66415.276144] zc3xx: probe 2wr ov vga 0x0000
[66417.496007] zc3xx: probe 2wr ov vga 0x0000
[66419.723869] zc3xx: probe 2wr ov vga 0x0000
[66421.979732] zc3xx: probe 2wr ov vga 0x0000
[66424.195595] zc3xx: probe 2wr ov vga 0x0000
[66426.415457] zc3xx: probe 2wr ov vga 0x0000
[66428.655322] zc3xx: probe 2wr ov vga 0x0000
[66430.883179] zc3xx: probe 2wr ov vga 0x0000
[66433.139045] zc3xx: probe 2wr ov vga 0x0000
[66435.383904] zc3xx: probe 2wr ov vga 0x0000
[66437.607764] zc3xx: probe 2wr ov vga 0x0000
[66439.828629] zc3xx: probe 2wr ov vga 0x0000
[66442.040494] zc3xx: probe 2wr ov vga 0x0000
[66444.263360] zc3xx: probe 2wr ov vga 0x0000
[66446.491219] zc3xx: probe 2wr ov vga 0x0000
[66448.724083] zc3xx: probe 2wr ov vga 0x0000
[66450.955943] zc3xx: probe 2wr ov vga 0x0000
[66453.175806] zc3xx: probe 2wr ov vga 0x0000
[66455.392671] zc3xx: probe 2wr ov vga 0x0000
[66457.619533] zc3xx: probe 2wr ov vga 0x0000
[66459.855395] zc3xx: probe 2wr ov vga 0x0000
[66462.072262] zc3xx: probe 2wr ov vga 0x0000
[66464.325127] zc3xx: probe 2wr ov vga 0x0000
[66466.693969] zc3xx: probe 2wr ov vga 0x0000
[66469.031832] zc3xx: probe 2wr ov vga 0x0000
[66471.255696] zc3xx: probe 2wr ov vga 0x0000
[66473.463558] zc3xx: probe 2wr ov vga 0x0000
[66475.695415] zc3xx: probe 2wr ov vga 0x0000
[66477.915593] zc3xx: probe 2wr ov vga 0x0000
[66480.147145] zc3xx: probe 2wr ov vga 0x0000
[66482.376009] zc3xx: probe 2wr ov vga 0x0000
[66484.620452] zc3xx: probe 2wr ov vga 0x0000
[66486.831728] zc3xx: probe 2wr ov vga 0x0000
[66489.039593] zc3xx: probe 2wr ov vga 0x0000
[66491.260461] zc3xx: probe 2wr ov vga 0x0000
[66493.483318] zc3xx: probe 2wr ov vga 0x0000
[66495.704185] zc3xx: probe 2wr ov vga 0x0000
[66497.941044] zc3xx: probe 2wr ov vga 0x0000
[66500.179908] zc3xx: probe 2wr ov vga 0x0000
[66502.411770] zc3xx: probe 2wr ov vga 0x0000
[66504.619634] zc3xx: probe 2wr ov vga 0x0000
[66506.828498] zc3xx: probe 2wr ov vga 0x0000
[66509.059363] zc3xx: probe 2wr ov vga 0x0000
[66511.295222] zc3xx: probe 2wr ov vga 0x0000
[66513.523083] zc3xx: probe 2wr ov vga 0x0000
[66515.749947] zc3xx: probe 2wr ov vga 0x0000
[66517.963808] zc3xx: probe 2wr ov vga 0x0000
[66520.187672] zc3xx: probe 2wr ov vga 0x0000
[66522.484536] zc3xx: probe 2wr ov vga 0x0000
[66524.725395] zc3xx: probe 2wr ov vga 0x0000
[66526.967253] zc3xx: probe 2wr ov vga 0x0000
[66529.200119] zc3xx: probe 2wr ov vga 0x0000
[66531.455977] zc3xx: probe 2wr ov vga 0x0000
[66533.659843] zc3xx: probe 2wr ov vga 0x0000
[66535.884707] zc3xx: probe 2wr ov vga 0x0000
[66538.115566] zc3xx: probe 2wr ov vga 0x0000
[66540.328431] zc3xx: probe 2wr ov vga 0x0000
[66542.560294] zc3xx: probe 2wr ov vga 0x0000
[66544.771155] zc3xx: probe 2wr ov vga 0x0000
[66547.004020] zc3xx: probe 2wr ov vga 0x0000
[66549.227882] zc3xx: probe 2wr ov vga 0x0000
[66551.439747] zc3xx: probe 2wr ov vga 0x0000
[66553.655610] zc3xx: probe 2wr ov vga 0x0000
[66555.871473] zc3xx: probe 2wr ov vga 0x0000
[66558.103336] zc3xx: probe 2wr ov vga 0x0000
[66560.503187] zc3xx: probe 2wr ov vga 0x0000
[66562.743047] zc3xx: probe 2wr ov vga 0x0000
[66564.983909] zc3xx: probe 2wr ov vga 0x0000
[66567.191776] zc3xx: probe 2wr ov vga 0x0000
[66569.447636] zc3xx: probe 2wr ov vga 0x0000
[66571.671501] zc3xx: probe 2wr ov vga 0x0000
[66573.899360] zc3xx: probe 2wr ov vga 0x0000
[66576.142225] zc3xx: probe 2wr ov vga 0x0000
[66578.405080] zc3xx: probe 2wr ov vga 0x0000
[66580.745940] zc3xx: probe 2wr ov vga 0x0000
[66583.005800] zc3xx: probe 2wr ov vga 0x0000
[66585.227664] zc3xx: probe 2wr ov vga 0x0000
[66587.455525] zc3xx: probe 2wr ov vga 0x0000
[66589.688390] zc3xx: probe 2wr ov vga 0x0000
[66591.924246] zc3xx: probe 2wr ov vga 0x0000
[66594.243108] zc3xx: probe 2wr ov vga 0x0000
[66596.483973] zc3xx: probe 2wr ov vga 0x0000
[66598.707832] zc3xx: probe 2wr ov vga 0x0000
[66600.931696] zc3xx: probe 2wr ov vga 0x0000
[66603.155558] zc3xx: probe 2wr ov vga 0x0000
[66605.407419] zc3xx: probe 2wr ov vga 0x0000
[66607.755271] zc3xx: probe 2wr ov vga 0x0000
[66610.048130] zc3xx: probe 2wr ov vga 0x0000
[66612.355987] zc3xx: probe 2wr ov vga 0x0000
[66614.659848] zc3xx: probe 2wr ov vga 0x0000
[66616.895716] zc3xx: probe 2wr ov vga 0x0000
[66619.189316] zc3xx: probe 2wr ov vga 0x0000
[66621.443431] zc3xx: probe 2wr ov vga 0x0000
[66623.684289] zc3xx: probe 2wr ov vga 0x0000
[66626.003148] zc3xx: probe 2wr ov vga 0x0000
[66628.228011] zc3xx: probe 2wr ov vga 0x0000
[66630.495871] zc3xx: probe 2wr ov vga 0x0000
[66632.711731] zc3xx: probe 2wr ov vga 0x0000
[66634.923604] zc3xx: probe 2wr ov vga 0x0000
[66637.155460] zc3xx: probe 2wr ov vga 0x0000
[66639.412322] zc3xx: probe 2wr ov vga 0x0000
[66641.724186] zc3xx: probe 2wr ov vga 0x0000
ALdaperan έγραψε:[ 18.368044] saa7133[0]: registered device video1 [v4l2]
Λειτουργικό: Ubuntu 10.04 lucid 64-bit | Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560 |
Κάρτα γραφικών: ATI Device [1002:68c0] | Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) |
ALdaperan έγραψε:έβγαλα τη καμερα και μου δείχνει αυτο εδώ :
[ 18.368044] saa7133[0]: registered device video1 [v4l2]
Λειτουργικό: Ubuntu 10.04 lucid 64-bit | Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560 |
Κάρτα γραφικών: ATI Device [1002:68c0] | Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) |
[ 0.253440] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.253545] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.253546] TCP reno registered
[ 0.253589] NET: Registered protocol family 1
[ 0.253622] Trying to unpack rootfs image as initramfs...
[ 0.382656] Freeing initrd memory: 7717k freed
[ 0.384977] cpufreq-nforce2: No nForce2 chipset.
[ 0.385005] Scanning for low memory corruption every 60 seconds
[ 0.385078] audit: initializing netlink socket (disabled)
[ 0.385091] type=2000 audit(1271165153.383:1): initialized
[ 0.390823] highmem bounce pool size: 64 pages
[ 0.390826] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.391776] VFS: Disk quotas dquot_6.5.2
[ 0.391815] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.392185] fuse init (API version 7.12)
[ 0.392237] msgmni has been set to 1705
[ 0.392383] alg: No test for stdrng (krng)
[ 0.392392] io scheduler noop registered
[ 0.392394] io scheduler anticipatory registered
[ 0.392395] io scheduler deadline registered
[ 0.392421] io scheduler cfq registered (default)
[ 0.392531] pci 0000:01:00.0: Boot video device
[ 0.392614] alloc irq_desc for 24 on node -1
[ 0.392615] alloc kstat_irqs on node -1
[ 0.392622] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.392627] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.392696] alloc irq_desc for 25 on node -1
[ 0.392698] alloc kstat_irqs on node -1
[ 0.392703] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.392709] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.392791] alloc irq_desc for 26 on node -1
[ 0.392792] alloc kstat_irqs on node -1
[ 0.392797] pcieport-driver 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.392803] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.392888] alloc irq_desc for 27 on node -1
[ 0.392889] alloc kstat_irqs on node -1
[ 0.392894] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.392900] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.392962] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.393033] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.393125] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.393128] ACPI: Power Button [PWRF]
[ 0.393168] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.393170] ACPI: Power Button [PWRB]
[ 0.393388] processor LNXCPU:00: registered as cooling_device0
[ 0.393414] processor LNXCPU:01: registered as cooling_device1
[ 0.395023] isapnp: Scanning for PnP cards...
[ 0.501631] Switched to high resolution mode on CPU 1
[ 0.503971] Switched to high resolution mode on CPU 0
[ 0.747763] isapnp: No Plug & Play device found
[ 0.748492] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.748578] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.748877] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.749539] brd: module loaded
[ 0.749825] loop: module loaded
[ 0.749872] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.749921] ahci 0000:03:00.0: version 3.0
[ 0.749949] ata_piix 0000:00:1f.2: version 2.13
[ 0.749960] alloc irq_desc for 19 on node -1
[ 0.749961] alloc kstat_irqs on node -1
[ 0.749965] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.749968] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.750002] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.750041] scsi0 : ata_piix
[ 0.750087] scsi1 : ata_piix
[ 0.751018] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.751022] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.751038] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.751043] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.751069] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.751097] scsi2 : ata_piix
[ 0.751132] scsi3 : ata_piix
[ 0.751897] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.751900] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.752186] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.752206] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 0.752248] scsi4 : pata_marvell
[ 0.752298] scsi5 : pata_marvell
[ 0.752322] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 0.752324] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[ 0.752644] Fixed MDIO Bus: probed
[ 0.752665] PPP generic driver version 2.4.2
[ 0.752720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.752731] alloc irq_desc for 18 on node -1
[ 0.752732] alloc kstat_irqs on node -1
[ 0.752735] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.752741] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.752744] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.752762] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.756652] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.756656] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.756665] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe7ffc00
[ 0.772006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.772079] usb usb1: configuration #1 chosen from 1 choice
[ 0.772105] hub 1-0:1.0: USB hub found
[ 0.772111] hub 1-0:1.0: 6 ports detected
[ 0.772161] alloc irq_desc for 23 on node -1
[ 0.772163] alloc kstat_irqs on node -1
[ 0.772167] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.772175] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.772178] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.772203] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.776093] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.776097] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.776106] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe7ff800
[ 0.788008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.788065] usb usb2: configuration #1 chosen from 1 choice
[ 0.788089] hub 2-0:1.0: USB hub found
[ 0.788098] hub 2-0:1.0: 6 ports detected
[ 0.788148] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.788164] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.788181] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.788191] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.788193] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.788214] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.788232] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.788282] usb usb3: configuration #1 chosen from 1 choice
[ 0.788298] hub 3-0:1.0: USB hub found
[ 0.788303] hub 3-0:1.0: 2 ports detected
[ 0.788331] alloc irq_desc for 21 on node -1
[ 0.788332] alloc kstat_irqs on node -1
[ 0.788335] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.788339] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.788341] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.788360] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.788384] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.788433] usb usb4: configuration #1 chosen from 1 choice
[ 0.788449] hub 4-0:1.0: USB hub found
[ 0.788453] hub 4-0:1.0: 2 ports detected
[ 0.788482] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.788486] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.788488] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.788505] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.788523] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.788570] usb usb5: configuration #1 chosen from 1 choice
[ 0.788585] hub 5-0:1.0: USB hub found
[ 0.788589] hub 5-0:1.0: 2 ports detected
[ 0.788619] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.788623] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.788625] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.788642] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.788660] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.788707] usb usb6: configuration #1 chosen from 1 choice
[ 0.788723] hub 6-0:1.0: USB hub found
[ 0.788727] hub 6-0:1.0: 2 ports detected
[ 0.788758] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.788762] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.788764] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.788785] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.788802] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.788850] usb usb7: configuration #1 chosen from 1 choice
[ 0.788870] hub 7-0:1.0: USB hub found
[ 0.788874] hub 7-0:1.0: 2 ports detected
[ 0.788900] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.788906] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.788908] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.788925] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.788943] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.788990] usb usb8: configuration #1 chosen from 1 choice
[ 0.789008] hub 8-0:1.0: USB hub found
[ 0.789012] hub 8-0:1.0: 2 ports detected
[ 0.789076] PNP: No PS/2 controller found. Probing ports directly.
[ 0.791281] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.791285] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.791318] mice: PS/2 mouse device common for all mice
[ 0.791386] rtc_cmos 00:03: RTC can wake from S4
[ 0.791405] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.791424] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.791487] device-mapper: uevent: version 1.0.3
[ 0.791537] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.791580] device-mapper: multipath: version 1.1.0 loaded
[ 0.791581] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.791652] EISA: Probing bus 0 at eisa.0
[ 0.791673] EISA: Detected 0 cards.
[ 0.791722] cpuidle: using governor ladder
[ 0.791724] cpuidle: using governor menu
[ 0.792038] TCP cubic registered
[ 0.792140] NET: Registered protocol family 10
[ 0.792442] lo: Disabled Privacy Extensions
[ 0.792657] NET: Registered protocol family 17
[ 0.792669] Bluetooth: L2CAP ver 2.13
[ 0.792670] Bluetooth: L2CAP socket layer initialized
[ 0.792672] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.792672] Bluetooth: SCO socket layer initialized
[ 0.792690] Bluetooth: RFCOMM TTY layer initialized
[ 0.792692] Bluetooth: RFCOMM socket layer initialized
[ 0.792693] Bluetooth: RFCOMM ver 1.11
[ 0.792711] Using IPI No-Shortcut mode
[ 0.792747] PM: Resume from disk failed.
[ 0.792753] registered taskstats version 1
[ 0.792837] Magic number: 6:715:432
[ 0.792877] rtc_cmos 00:03: setting system clock to 2010-04-13 13:25:54 UTC (1271165154)
[ 0.792879] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.792880] EDD information not available.
[ 1.078525] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.089028] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.089044] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.222633] usb 1-2: configuration #1 chosen from 1 choice
[ 1.332009] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 1.468450] usb 2-1: configuration #1 chosen from 1 choice
[ 1.564052] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.564064] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.564074] ata2.01: link offline, clearing class 3 to NONE
[ 1.564232] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.564241] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.572338] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[ 1.572340] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.572472] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB00, max UDMA/100
[ 1.588349] ata1.00: configured for UDMA/133
[ 1.588423] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[ 1.588498] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.588526] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.588555] sd 0:0:0:0: [sda] Write Protect is off
[ 1.588557] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.588572] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.588650] sda:
[ 1.588740] ata2.00: configured for UDMA/100
[ 1.589632] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB00 PQ: 0 ANSI: 5
[ 1.591226] sda1 sda2 sda3
[ 1.593131] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.593135] Uniform CD-ROM driver Revision: 3.20
[ 1.593202] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.593238] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.628689] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.636509] usb 2-3: new high speed USB device using ehci_hcd and address 4
[ 1.759070] Freeing unused kernel memory: 544k freed
[ 1.759277] Write protecting the kernel text: 4584k
[ 1.759305] Write protecting the kernel read-only data: 1840k
[ 1.784077] usb 2-3: configuration #1 chosen from 1 choice
[ 1.830213] Linux agpgart interface v0.103
[ 1.860877] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.860888] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.882591] Initializing USB Mass Storage driver...
[ 1.882657] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.882762] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1.882849] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1.882921] usbcore: registered new interface driver usb-storage
[ 1.882923] USB Mass Storage support registered.
[ 1.884271] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.889273] usb-storage: device found at 4
[ 1.889275] usb-storage: waiting for device to settle before scanning
[ 1.889280] usb-storage: device found at 2
[ 1.889281] usb-storage: waiting for device to settle before scanning
[ 1.889285] usb-storage: device found at 2
[ 1.889286] usb-storage: waiting for device to settle before scanning
[ 1.942517] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febfe000-febfe7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 2.092010] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 2.269751] usb 6-2: configuration #1 chosen from 1 choice
[ 2.301579] usbcore: registered new interface driver hiddev
[ 2.314723] generic-usb 0003:0665:5161.0001: hiddev96,hidraw0: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.0-2/input0
[ 2.314733] usbcore: registered new interface driver usbhid
[ 2.314734] usbhid: v2.6:USB HID core driver
[ 2.556009] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 2.668987] xor: automatically using best checksumming function: pIII_sse
[ 2.688503] pIII_sse : 11489.000 MB/sec
[ 2.688504] xor: using function: pIII_sse (11489.000 MB/sec)
[ 2.690081] device-mapper: dm-raid45: initialized v0.2594b
[ 2.749028] usb 8-1: configuration #1 chosen from 1 choice
[ 2.767190] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input3
[ 2.767226] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input0
[ 2.857982] microsoft 0003:045E:00F9.0003: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[ 2.906113] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input4
[ 2.906174] microsoft 0003:045E:00F9.0003: input,hidraw2: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.2-1/input1
[ 2.963821] PM: Starting manual resume from disk
[ 2.963824] PM: Resume from partition 8:3
[ 2.963825] PM: Checking hibernation image.
[ 2.963984] PM: Resume from disk failed.
[ 2.991712] kjournald starting. Commit interval 5 seconds
[ 2.991717] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.220120] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00015fd8da]
[ 3.561701] type=1505 audit(1271165157.267:2): operation="profile_load" pid=455 name=/usr/share/gdm/guest-session/Xsession
[ 3.574584] type=1505 audit(1271165157.279:3): operation="profile_load" pid=456 name=/sbin/dhclient3
[ 3.575163] type=1505 audit(1271165157.279:4): operation="profile_load" pid=456 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.575423] type=1505 audit(1271165157.279:5): operation="profile_load" pid=456 name=/usr/lib/connman/scripts/dhclient-script
[ 3.605197] type=1505 audit(1271165157.311:6): operation="profile_load" pid=457 name=/usr/bin/evince
[ 3.612879] type=1505 audit(1271165157.319:7): operation="profile_load" pid=457 name=/usr/bin/evince-previewer
[ 3.617423] type=1505 audit(1271165157.323:8): operation="profile_load" pid=457 name=/usr/bin/evince-thumbnailer
[ 3.633946] type=1505 audit(1271165157.339:9): operation="profile_load" pid=459 name=/usr/lib/cups/backend/cups-pdf
[ 3.634599] type=1505 audit(1271165157.339:10): operation="profile_load" pid=459 name=/usr/sbin/cupsd
[ 4.456387] Adding 2562356k swap on /dev/sda3. Priority:-1 extents:1 across:2562356k
[ 4.617722] EXT3 FS on sda2, internal journal
[ 5.511332] udev: starting version 147
[ 6.308843] lp: driver loaded but no devices found
[ 6.888188] usb-storage: device scan complete
[ 6.888204] usb-storage: device scan complete
[ 6.888354] usb-storage: device scan complete
[ 6.888864] scsi 6:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
[ 6.889236] scsi 6:0:0:1: CD-ROM SanDisk U3 Cruzer Micro 3.27 PQ: 0 ANSI: 2
[ 6.890923] scsi 8:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2
[ 6.923553] scsi 7:0:0:0: Direct-Access WD 2500JB External 0107 PQ: 0 ANSI: 0
[ 6.923827] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 6.923907] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 6.923986] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 6.925594] sr1: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
[ 6.925673] sr 6:0:0:1: Attached scsi CD-ROM sr1
[ 6.925705] sr 6:0:0:1: Attached scsi generic sg5 type 5
[ 6.926216] sd 6:0:0:0: [sdd] 8015502 512-byte logical blocks: (4.10 GB/3.82 GiB)
[ 6.926280] sd 7:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 6.926930] sd 6:0:0:0: [sdd] Write Protect is off
[ 6.926932] sd 6:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 6.926934] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 6.928744] sd 7:0:0:0: [sdb] Write Protect is off
[ 6.928746] sd 7:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 6.928747] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 6.930154] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 6.930157] sdb: sdb1
[ 6.931903] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 6.932654] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 6.932656] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 6.933479] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 6.933482] sdd: sdd1
[ 6.938967] sd 6:0:0:0: [sdd] Assuming drive cache: write through
[ 6.938971] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 7.311666] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 7.311669] Disabling lock debugging due to kernel taint
[ 7.326477] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[ 7.326645] [fglrx] vendor: 1002 device: 9442 count: 1
[ 7.326954] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 7.326965] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.326969] pci 0000:01:00.0: setting latency timer to 64
[ 7.327132] [fglrx] Kernel PAT support is enabled
[ 7.327150] [fglrx] module loaded - fglrx 8.66.10 [Sep 3 2009] with 1 minors
[ 7.393300] coretemp coretemp.0: Using relative temperature scale!
[ 7.393328] coretemp coretemp.1: Using relative temperature scale!
[ 7.740917] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 7.856716] Linux video capture interface: v2.00
[ 8.122936] alloc irq_desc for 22 on node -1
[ 8.122939] alloc kstat_irqs on node -1
[ 8.122944] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 8.122968] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 8.159214] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 8.159241] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 8.159246] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[ 8.159251] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[ 8.159258] saa7133[0]: board init: gpio is 600e000
[ 8.159263] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 8.197447] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084A
[ 8.197465] usbcore: registered new interface driver usblp
[ 8.308504] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 8.308512] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[ 8.308519] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[ 8.308526] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[ 8.308533] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308540] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308547] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308554] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308561] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308568] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308575] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308581] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308588] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308595] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308602] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308609] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 8.308617] i2c-adapter i2c-0: Invalid 7-bit address 0x7a
[ 9.018969] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 9.021594] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.021619] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 9.058952] tuner 0-004b: chip found @ 0x96 (saa7133[0])
[ 9.136007] tda829x 0-004b: setting tuner address to 61
[ 9.256027] alloc irq_desc for 28 on node -1
[ 9.256030] alloc kstat_irqs on node -1
[ 9.256041] ATL1E 0000:02:00.0: irq 28 for MSI/MSI-X
[ 9.256150] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 9.256280] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.256401] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 9.404509] tda829x 0-004b: type set to tda8290+75a
[ 10.636725] __ratelimit: 3 callbacks suppressed
[ 10.636728] type=1505 audit(1271154364.343:12): operation="profile_replace" pid=1150 name=/usr/share/gdm/guest-session/Xsession
[ 10.637814] type=1505 audit(1271154364.343:13): operation="profile_replace" pid=1151 name=/sbin/dhclient3
[ 10.638296] type=1505 audit(1271154364.343:14): operation="profile_replace" pid=1151 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 10.638559] type=1505 audit(1271154364.343:15): operation="profile_replace" pid=1151 name=/usr/lib/connman/scripts/dhclient-script
[ 10.640924] type=1505 audit(1271154364.347:16): operation="profile_replace" pid=1152 name=/usr/bin/evince
[ 10.651015] type=1505 audit(1271154364.355:17): operation="profile_replace" pid=1152 name=/usr/bin/evince-previewer
[ 10.655602] type=1505 audit(1271154364.359:18): operation="profile_replace" pid=1152 name=/usr/bin/evince-thumbnailer
[ 10.663172] type=1505 audit(1271154364.367:19): operation="profile_replace" pid=1168 name=/usr/lib/cups/backend/cups-pdf
[ 10.663734] type=1505 audit(1271154364.367:20): operation="profile_replace" pid=1168 name=/usr/sbin/cupsd
[ 10.665676] type=1505 audit(1271154364.371:21): operation="profile_replace" pid=1170 name=/usr/sbin/tcpdump
[ 12.812952] ppdev: user-space parallel port driver
[ 13.325335] input: i2c IR (Pinnacle PCTV) as /devices/virtual/input/input6
[ 13.325373] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-0/0-0047/ir0 [saa7133[0]]
[ 13.388585] saa7133[0]: registered device video0 [v4l2]
[ 13.388605] saa7133[0]: registered device vbi0
[ 13.388621] saa7133[0]: registered device radio0
[ 13.401078] saa7134 ALSA driver for DMA sound loaded
[ 13.401087] IRQ 18/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 13.401103] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[ 13.521106] dvb_init() allocating 1 frontend
[ 13.712592] DVB: registering new adapter (saa7133[0])
[ 13.712596] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 13.800803] tda1004x: setting up plls for 48MHz sampling clock
[ 14.088006] tda1004x: found firmware revision 29 -- ok
[ 14.479650] usb 2-3: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 17.401075] alloc irq_desc for 29 on node -1
[ 17.401078] alloc kstat_irqs on node -1
[ 17.401086] fglrx_pci 0000:01:00.0: irq 29 for MSI/MSI-X
[ 17.401493] [fglrx] Firegl kernel thread PID: 1762
[ 19.229544] [fglrx] Gart USWC size:627 M.
[ 19.229546] [fglrx] Gart cacheable size:247 M.
[ 19.229550] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.229552] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000
[ 19.229567] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 20.168008] eth0: no IPv6 routers present
[ 20.916012] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[ 21.300634] CPU0 attaching NULL sched-domain.
[ 21.300638] CPU1 attaching NULL sched-domain.
[ 21.320546] CPU0 attaching sched-domain:
[ 21.320549] domain 0: span 0-1 level MC
[ 21.320552] groups: 0 1
[ 21.320556] domain 1: span 0-1 level CPU
[ 21.320559] groups: 0-1 (__cpu_power = 2048)
[ 21.320564] CPU1 attaching sched-domain:
[ 21.320566] domain 0: span 0-1 level MC
[ 21.320568] groups: 1 0
[ 21.320572] domain 1: span 0-1 level CPU
[ 21.320574] groups: 0-1 (__cpu_power = 2048)
[ 26.781685] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 29.916014] usb 2-1: reset high speed USB device using ehci_hcd and address 2
[ 30.080142] CPU0 attaching NULL sched-domain.
[ 30.080145] CPU1 attaching NULL sched-domain.
[ 30.096541] CPU0 attaching sched-domain:
[ 30.096544] domain 0: span 0-1 level MC
[ 30.096547] groups: 0 1
[ 30.096552] CPU1 attaching sched-domain:
[ 30.096554] domain 0: span 0-1 level MC
[ 30.096556] groups: 1 0
[ 46.750974] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 46.770841] ISOFS: changing to secondary root
ALdaperan έγραψε:[ 13.388585] saa7133[0]: registered device video0 [v4l2]
Λειτουργικό: Ubuntu 10.04 lucid 64-bit | Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560 |
Κάρτα γραφικών: ATI Device [1002:68c0] | Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) |
Λειτουργικό: Ubuntu 10.04 lucid 64-bit | Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560 |
Κάρτα γραφικών: ATI Device [1002:68c0] | Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) |