Πρόβλημα με οδηγό για NVidia, καθορισμός συχνότητας(επιλύθη)

...κάρτες γραφικών / προβλήματα εικόνας / τηλεοπτικοί δέκτες
Κανόνες Δ. Συζήτησης
Αν έχετε πρόβλημα με την κάρτα γραφικών σας και δεν μπορείτε να μπείτε σε γραφικό περιβάλλον,
δοκιμάστε να τρέξετε την παρακάτω εντολή για να ελέγξετε αν το σύστημά σας χρειάζεται πρόσθετους κλειστούς οδηγούς:
jockey-text

Για κάρτα τηλεόρασης δώστε τα αποτελέσματα των παρακάτω εντολών :
lspci -nn (Για εσωτερικές κάρτες pci)
lsusb (Για εξωτερικές κάρτες με σύνδεση usb)

Πρόβλημα με οδηγό για NVidia, καθορισμός συχνότητας(επιλύθη)

Δημοσίευσηαπό Amadeus7 » 10 Ιουν 2008, 11:18

έβαλα το Regnum Online. όταν, αφου κάνω log in, πάει να μπεί το main game μου πετάει ένα πινακάκι και μου λέει να αλλάξω τις ρυθμίσεις της οθόνης μου σε 1280χ1024 και 60Hz. κάνω τισ ρυθμίσεις μέσα από το nvidia settings->apply και μετα ρεσταρτ. αλλά όταν ξανατρέξω το game μου βγαίνει παλι το ίδιο. πάω μετά στο system->preferences->monitor resolution settings και εκεί βλέπω πως για refresh rate έχω μόνο 2 επιλογές, 50 και 51Hz. αυτό πώς το αλλάζω? (μου συμβαίνει και με άλλο game). έχω οθόνη philips 170c, κάρτα γραφικών nvidia geforce 7600gt kai linux ubuntu 8.04 hardy
έχει ξαναυπάρξει αυτό το πρόβήμα αλλά δε ξέρω αν λύθηκε.
https://bugs.launchpad.net/ubuntu/+source/linux-restricted-modules-2.6.24/+bug/197681
Τελευταία επεξεργασία από Amadeus7 και 14 Ιουν 2008, 17:22, έχει επεξεργασθεί 2 φορά/ες συνολικά
προσωπική ιστοσελίδα
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Ναι┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 9.04 / Windows XP Pro
Προδιαγραφές New PC⇛cpu: AMD Athlon(tm) 7850 Dual-Core Processor | ram: kingston 4GB 800mhz | mobo: Gigabyte GA-MA770-UD3 | gpu: ATI Radeon HD 4850 | Οθόνη: Samsung Syncmaster T200HD
Προδιαγραφές Old PC ⇛ cpu: AMD AM2 3800+ x2 | ram: kingston 2GB 800mhz | gpu: NVIDIA Geforce 7600gt │mobo: asus m2n-e | Οθόνη: Samsung 170C
Άβαταρ μέλους
Amadeus7
babeTUX
babeTUX
 
Δημοσιεύσεις: 23
Εγγραφή: 06 Ιουν 2008, 15:18
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό vista killer » 11 Ιουν 2008, 13:56

Τις ρυθμίσεις της οθόνης σου εκτός game σε τι ανάλυση τις έχεις?
Άβαταρ μέλους
vista killer
saintTUX
saintTUX
 
Δημοσιεύσεις: 1550
Εγγραφή: 13 Μάιος 2008, 11:57
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό Dimitris » 11 Ιουν 2008, 14:32

Aπ'ότι διαβάζω στο bug report, το πρόβλημά του λύθηκε. Τώρα στο δικό σου πρόβλημα.

Πριν κάνεις οτιδήποτε, κράτα ένα αντίγραφο του /etc/X11/xorg.conf με
Κώδικας: Επιλογή όλων
cp /etc/X11/xorg.conf ~/Desktop


Η συχνότητα αλλάζει πολύ εύκολα στο αρχείο xorg.conf, αλλά πρώτα πρέπει να σιγουρέψεις αν η οθόνη σου υποστηρίζει αυτή τη συχνότητα. Αν δεν την υποστηρίζει στην καλύτερη περίπτωση να επιστρέψει στα 50Hz, στη χειρότερη να καεί. Δε σου το λέω να τρομάξεις απλώς για να γνωρίζεις κι αυτό το ενδεχόμενο.

Αλλά ας πάρουμε τα πράματα με τη σειρά. Τι οδηγό χρησιμοποιεί για την καρτα γραφικών; Μπορείς να έχεις πολλούς εγκατεστημένους αλλά ένα μόνο χρησιμοποιείς. Κι αυτό φαίνεται στο xorg.conf, μέσα στο section "Device" υπάρχει μία γραμμή driver. Για να μη ψάχνεις όλο το αρχείο, μπορείς να βάλεις τον υπολογιστή να ψάξει για σενα. Η εντολή:
Κώδικας: Επιλογή όλων
cat /etc/X11/xorg.conf | grep -i driver

τυπώνει το αρχείο στην τυπική έξοδο, δηλαδή οθόνη, αλλά πριν διοχετεύει το αποτέλεσμα στην επομενη εντολη, grep, η οποία ψάχνει και τυπωνει μόνο τις γραμμές που περιέχουν τη λέξη driver. Η επιλογή -i δε λαμβανει υποψην κεφαλαία-μικρά. Σε εμένα για παράδειγμα το αποτέλεσμα αυτής της εντολής είναι:
driver "nvidia"
Σε εσένα μπορεί να είναι διαφορετικό, μην ανησυχείς. Επειτα μπορούμε να προσεγγίσουμε το πρόβλημα βήμα-βήμα.
Άβαταρ μέλους
Dimitris
saintTUX
saintTUX
 
Δημοσιεύσεις: 1357
Εγγραφή: 13 Μάιος 2008, 13:57
Τοποθεσία: Θεσσαλονίκη
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό Amadeus7 » 11 Ιουν 2008, 15:06

Dimitris έγραψε:Aπ'ότι διαβάζω στο bug report, το πρόβλημά του λύθηκε. Τώρα στο δικό σου πρόβλημα.

Πριν κάνεις οτιδήποτε, κράτα ένα αντίγραφο του /etc/X11/xorg.conf με
Κώδικας: Επιλογή όλων
cp /etc/X11/xorg.conf ~/Desktop


Η συχνότητα αλλάζει πολύ εύκολα στο αρχείο xorg.conf, αλλά πρώτα πρέπει να σιγουρέψεις αν η οθόνη σου υποστηρίζει αυτή τη συχνότητα. Αν δεν την υποστηρίζει στην καλύτερη περίπτωση να επιστρέψει στα 50Hz, στη χειρότερη να καεί. Δε σου το λέω να τρομάξεις απλώς για να γνωρίζεις κι αυτό το ενδεχόμενο.

Αλλά ας πάρουμε τα πράματα με τη σειρά. Τι οδηγό χρησιμοποιεί για την καρτα γραφικών; Μπορείς να έχεις πολλούς εγκατεστημένους αλλά ένα μόνο χρησιμοποιείς. Κι αυτό φαίνεται στο xorg.conf, μέσα στο section "Device" υπάρχει μία γραμμή driver. Για να μη ψάχνεις όλο το αρχείο, μπορείς να βάλεις τον υπολογιστή να ψάξει για σενα. Η εντολή:
Κώδικας: Επιλογή όλων
cat /etc/X11/xorg.conf | grep -i driver

τυπώνει το αρχείο στην τυπική έξοδο, δηλαδή οθόνη, αλλά πριν διοχετεύει το αποτέλεσμα στην επομενη εντολη, grep, η οποία ψάχνει και τυπωνει μόνο τις γραμμές που περιέχουν τη λέξη driver. Η επιλογή -i δε λαμβανει υποψην κεφαλαία-μικρά. Σε εμένα για παράδειγμα το αποτέλεσμα αυτής της εντολής είναι:
driver "nvidia"
Σε εσένα μπορεί να είναι διαφορετικό, μην ανησυχείς. Επειτα μπορούμε να προσεγγίσουμε το πρόβλημα βήμα-βήμα.

η οθόνη μου υποστηρίζει ανάλυση 1280x1024 με refresh rate 60 (μέχρι 75 υποστηρίζει) γι'αυτό είμαι σίγουρος διότι αυτές τις ρυθμίσεις χρησιμοποιώ στα windows.
μόλις δώσω cat /etc/X11/xorg.conf | grep -i driver μου βγάζει τα εξής:
Driver "kbd"
Driver "mouse"
Driver "nvidia"
Driver "nvidia"
Τελευταία επεξεργασία από Amadeus7 και 11 Ιουν 2008, 15:45, έχει επεξεργασθεί 1 φορά/ες συνολικά
προσωπική ιστοσελίδα
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Ναι┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 9.04 / Windows XP Pro
Προδιαγραφές New PC⇛cpu: AMD Athlon(tm) 7850 Dual-Core Processor | ram: kingston 4GB 800mhz | mobo: Gigabyte GA-MA770-UD3 | gpu: ATI Radeon HD 4850 | Οθόνη: Samsung Syncmaster T200HD
Προδιαγραφές Old PC ⇛ cpu: AMD AM2 3800+ x2 | ram: kingston 2GB 800mhz | gpu: NVIDIA Geforce 7600gt │mobo: asus m2n-e | Οθόνη: Samsung 170C
Άβαταρ μέλους
Amadeus7
babeTUX
babeTUX
 
Δημοσιεύσεις: 23
Εγγραφή: 06 Ιουν 2008, 15:18
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό Dimitris » 11 Ιουν 2008, 15:27

Amadeus7 έγραψε:Driver "kbd"

είναι το πληκτρολόγιο (keyboard)

Amadeus7 έγραψε:Driver "mouse"

είναι προφανώς το ποντίκι

Amadeus7 έγραψε:Driver "nvidia"

είναι οι καινούριοι κλειστοί οδηγοί της nvidia.

Πριν βγεις από το nvidia-settings, πρέπει να πατήσεις save to configuration file.

Η οθονη login εμφανίζεται στη σωστή ανάλυση ή όπως σε εμένα παλιοτερα μόνο το επανω δεξί τέταρτο; Το ίδιο πρόβλημα διάβασα είχει κι αυτός που κατέθεσε το bug report.

Άλλη ερώτηση έχεις ενεργοποιημένο το compiz;
Άβαταρ μέλους
Dimitris
saintTUX
saintTUX
 
Δημοσιεύσεις: 1357
Εγγραφή: 13 Μάιος 2008, 13:57
Τοποθεσία: Θεσσαλονίκη
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό Amadeus7 » 11 Ιουν 2008, 15:47

η οθόνη login εμφανίζεται μία χαρά (στο κέντρο). το compiz είναι ενεργοποιημένο
προσωπική ιστοσελίδα
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Ναι┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 9.04 / Windows XP Pro
Προδιαγραφές New PC⇛cpu: AMD Athlon(tm) 7850 Dual-Core Processor | ram: kingston 4GB 800mhz | mobo: Gigabyte GA-MA770-UD3 | gpu: ATI Radeon HD 4850 | Οθόνη: Samsung Syncmaster T200HD
Προδιαγραφές Old PC ⇛ cpu: AMD AM2 3800+ x2 | ram: kingston 2GB 800mhz | gpu: NVIDIA Geforce 7600gt │mobo: asus m2n-e | Οθόνη: Samsung 170C
Άβαταρ μέλους
Amadeus7
babeTUX
babeTUX
 
Δημοσιεύσεις: 23
Εγγραφή: 06 Ιουν 2008, 15:18
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό ilpara » 11 Ιουν 2008, 16:18

(δεν έχω πρόβλημα, από περιέργεια ρωτάω)

Γιατί βλέπω διπλή καταχώρηση nvidia?
ip@ipubuntu:~$ cat /etc/X11/xorg.conf | grep -i driver
Driver "kbd"
Driver "mouse"
Driver "synaptics"
Driver "wacom"
Driver "wacom"
Driver "wacom"
Driver "nvidia"
Driver "nvidia"

ip@ipubuntu:~$

ιδού και το xorg.conf:
# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
Option "SHMConfig" "on"
Option "MinSpeed" "1.2"
Option "MaxSpeed" "1.5"
Option "AccelFactor" "0.5"
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "Device"
Identifier "nVidia Corporation G80 [Quadro FX 360M]"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 0
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Modelname "Custom 1"
modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
modeline "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
modeline "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
modeline "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
modeline "2048x1536@60" 266.95 2048 2200 2424 2800 1536 1537 1540 1589 -hsync +vsync
Gamma 1.0
EndSection

Section "Screen"
Identifier "Default Screen"
Device "nVidia Corporation G80 [Quadro FX 360M]"
Monitor "Generic Monitor"
Defaultdepth 24
SubSection "Display"
Depth 24
Virtual 2048 1536
Modes "1600x1200@60" "1792x1344@60" "1400x1050@60" "1856x1392@60" "1280x1024@60" "1920x1440@60" "1280x960@60" "2048x1536@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
screen 0 "Default Screen" 0 0
Inputdevice "Generic Keyboard"
Inputdevice "Configured Mouse"

# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Inputdevice "Synaptics Touchpad"
EndSection
Section "Module"
Load "glx"
Load "v4l"
EndSection
Section "device" #
Identifier "device1"
Boardname "nv"
Busid "PCI:1:0:0"
Driver "nvidia"
Screen 1
EndSection
Section "screen" #
Identifier "screen1"
Device "device1"
Defaultdepth 24
Monitor "monitor1"
EndSection
Section "monitor" #
Identifier "monitor1"
Gamma 1.0
EndSection
Section "ServerFlags"
EndSection
*Oδηγίες προς Nεοεισερχόμενους*ΟδηγοίLive chat (IRC)
⇛ Linux: Μέτριο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Καλά
⇛ Ubuntu 12.04 32bit
⇛ Dell M4300: T7500 (2.2GHZ 4MB) ┃ 2GB ┃ NVIDIA Quadro FX 360M (256MB) ┃ Intel 4965 ┃ 15.4" WUXGA
Άβαταρ μέλους
ilpara
powerTUX
powerTUX
 
Δημοσιεύσεις: 2250
Εγγραφή: 11 Μάιος 2008, 11:43
Τοποθεσία: Αθήνα-Βύρωνας
IRC: ilpara
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό Amadeus7 » 11 Ιουν 2008, 16:23

να και το δικό μου.
Κώδικας: Επιλογή όλων
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@yellow)  Tue Mar  4 20:28:57 UTC 2008

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Philips 170C"
    HorizSync       30.0 - 83.0
    VertRefresh     56.0 - 76.0
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
    Option         "NoLogo" "True"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GT"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
EndSection

Section "Screen"

# Removed Option "metamodes" "1280x1024_60 +0+0; nvidia-auto-select +0+0"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "0"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "1280x1024_60 +0+0; nvidia-auto-select +0+0; 1280x1024 +0+0"
EndSection
προσωπική ιστοσελίδα
Γνώσεις ⇛ Linux: Μέτριο ┃ Προγραμματισμός: Ναι┃ Αγγλικά: Καλά
Λειτουργικό ⇛ Ubuntu 9.04 / Windows XP Pro
Προδιαγραφές New PC⇛cpu: AMD Athlon(tm) 7850 Dual-Core Processor | ram: kingston 4GB 800mhz | mobo: Gigabyte GA-MA770-UD3 | gpu: ATI Radeon HD 4850 | Οθόνη: Samsung Syncmaster T200HD
Προδιαγραφές Old PC ⇛ cpu: AMD AM2 3800+ x2 | ram: kingston 2GB 800mhz | gpu: NVIDIA Geforce 7600gt │mobo: asus m2n-e | Οθόνη: Samsung 170C
Άβαταρ μέλους
Amadeus7
babeTUX
babeTUX
 
Δημοσιεύσεις: 23
Εγγραφή: 06 Ιουν 2008, 15:18
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό ftso » 11 Ιουν 2008, 16:30

@ilpara απ'ότι βλέπω δεν έχεις κάνει τις ρυθμίσεις με το nvidia-settings.
Αν θες να μάθεις για αυτό που ρωτάς google για τις παραμέτρους του Xorg.conf.
Κώδικας: Επιλογή όλων
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings:  version 1.0  (buildd@yellow)  Tue Mar  4 20:28:57 UTC 2008

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 1.0  (buildmeister@builder26)  Thu Feb 14 18:13:41 PST 2008
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Generic Keyboard" "CoreKeyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Module"
    Load           "glx"
EndSection

Section "ServerFlags"
    Option         "Xinerama" "0"
EndSection

Section "InputDevice"
    Identifier     "Generic Keyboard"
    Driver         "kbd"
    Option         "XkbRules" "xorg"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us,gr"
    Option         "XkbVariant" ",extended"
    Option         "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
EndSection

Section "InputDevice"
    Identifier     "Configured Mouse"
    Driver         "mouse"
    Option         "CorePointer"
EndSection

Section "Monitor"
    Identifier     "Configured Monitor"
    Option          "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Samsung SyncMaster"
    HorizSync       30.0 - 81.0
    VertRefresh     56.0 - 75.0
    Option          "DPMS"
EndSection

Section "Device"
    Identifier     "Configured Video Device"
    Driver         "nvidia"
EndSection

Section "Device"
    Identifier     "Videocard0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce 7600 GT"
EndSection

Section "Screen"
    Identifier     "Default Screen"
    Device         "Configured Video Device"
    Monitor        "Configured Monitor"
    DefaultDepth    24
    Option         "NoLogo" "True"
    SubSection     "Display"
        Depth       24
        Modes      "nvidia-auto-select"
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Videocard0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "TwinView" "1"
    Option         "TwinViewXineramaInfoOrder" "CRT-0"
    Option         "metamodes" "CRT: nvidia-auto-select +0+0, TV: nvidia-auto-select +1280+0"
EndSection

Και σε εμένα τα έχει διπλά προφανώς επειδή έχω 2 dvi (και μια tv out) θύρες...χωρίς να είμαι σίγουρος.
Άβαταρ μέλους
ftso
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 6409
Εγγραφή: 12 Μάιος 2008, 13:40
Τοποθεσία: Αθήνα
IRC: ftso
Εκτύπωση

Re: bug με γραφικα?

Δημοσίευσηαπό Dimitris » 11 Ιουν 2008, 16:36

Ενα ένα :)

@ilpara: Η πρώτη καταχώρηση δηλώνει ότι πρέπει να χρησιμοποιήσει τον οδηγό nvidia για την καρτα σου (βρίσκεται στο section "Device") και η δεύτερη δηλώνει ότι πρέπει να φορτώσει το αντίστοιχο module κατα την εκκίνηση (βρίσκεται στο section "Module").


@Amadeus7: Aπ'ότι βλέπω έχεις δύο sections "Screen" όπου η πρώτη χρησιμοποιεί κάποιες default τιμές. Κράτα αντίγραφο του xorg.conf

cp /etx/X11/xorg.conf ~/Desktop

και μετά βάλε # μπροστά από τις γραμμές
Section "Screen"
Identifier "Default Screen"
Device "Configured Video Device"
Monitor "Configured Monitor"
DefaultDepth 24
EndSection

κάνε restart. Αν πάλι δε λειτουργήσει απενεργοποίησε το compiz και ξαναδοκίμασε.
Άβαταρ μέλους
Dimitris
saintTUX
saintTUX
 
Δημοσιεύσεις: 1357
Εγγραφή: 13 Μάιος 2008, 13:57
Τοποθεσία: Θεσσαλονίκη
Εκτύπωση

Επόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Κάρτες Γραφικών / Εικόνα / TV