Έλεγχος σκληρού δίσκου Hardware

...το μέρος για να ξεκινήσετε!

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Παρακαλώ να επιλέξετε, με προσοχή, την άδεια που θέλετε να έχουν οι οδηγοί που συγγράφετε.
Πληροφορίες για τις άδειες μπορείτε να βρείτε εδώ.
Άμα επιθυμείτε κάποια άλλη άδεια επικοινωνήστε με κάποιο Διαχειριστή είτε Συντονιστή.

Σημαντικό είναι να χρησιμοποιήσετε την υπηρεσία http://imagebin.ubuntu-gr.org για τις εικόνες.

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 06 Σεπ 2011, 01:39

Καλό είναι να τον αντικαταστήσεις.
Από την σκόνη δεν παθαίνει ζημιά ο δίσκος γιατί είναι ερμητικά κλειστός.
Η σκόνη όμως είναι η αιτία του σφάλματος που είχες στην εικόνα παραπάνω. Γενικά υπολογιστές και σκόνη είναι κακός συνδυασμός. Κάντου έναν καθαρισμό με πεπιεσμένο αέρα (όχι με κανένα κομπρεσερ από το εργοτάξιο, γιατί θα πάρεις τα εξαρτήματα στο χέρι)
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Th P » 06 Σεπ 2011, 09:55

Καλημέρα στην κοινότητα

Ενώ παίρνω αυτό:
Κώδικας: Επιλογή όλων
=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD MK..52GSX series
Device Model:     TOSHIBA MK3252GSX
Serial Number:    98FNT1AIT
Firmware Version: LV010A
User Capacity:    320.072.933.376 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Tue Sep  6 09:45:40 2011 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:        ( 120) seconds.
Offline data collection
capabilities:           (0x5b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     ( 135) minutes.
SCT capabilities:           (0x0039)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1600
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       4211
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       20
  7 Seek_Error_Rate         0x000b   100   099   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   084   084   000    Old_age   Always       -       6779
10 Spin_Retry_Count        0x0033   184   100   030    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       4097
192 Power-Off_Retract_Count 0x0032   099   099   000    Old_age   Always       -       877
193 Load_Cycle_Count        0x0032   095   095   000    Old_age   Always       -       54961
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       42 (Lifetime Min/Max 12/48)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       20
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       8310
222 Loaded_Hours            0x0032   086   086   000    Old_age   Always       -       5989
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       223
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      5774         -
# 2  Short offline       Completed without error       00%      5583         -
# 3  Short offline       Completed without error       00%      5566         -
# 4  Short offline       Completed without error       00%      5565         -
# 5  Short offline       Completed without error       00%      5560         -

SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Έχω παράλληλα και αυτό:


Edit: που μάλλον αφορά αυτό:
Κώδικας: Επιλογή όλων
Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       20


χωρίς να έχω παράξενα κολλήματα κλπ.

Είναι σοβαρό αυτό το σφάλμα;
Διορθώνεται;
Σταθερή είναι η διανομή που προσπαθείς ανεπιτυχώς να κρασσάρεις
Linux: Low┃Προγραμματισμός: No┃Αγγλικά: Good
Είμαι αναλφάβητος, ανιστόρητος και άξιος της μοίρας μου
Άβαταρ μέλους
Th P
powerTUX
powerTUX
 
Δημοσιεύσεις: 1981
Εγγραφή: 02 Μάιος 2009, 10:46
Τοποθεσία: Θεσσαλονίκη
IRC: ThP1
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 06 Σεπ 2011, 11:34

Δεν έχεις πρόβλημα, επειδή οι άλλοι δείκτες είναι μηδέν.
Πρέπει να ελέγχεις που και που για να δεις αν το νούμερο θα ανεβεί. Αν αρχίσει να ανεβαίνει τότε θα υπάρχει πρόβλημα.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Th P » 06 Σεπ 2011, 12:06

@the_eye
Ok!
Ευχαριστώ!
Σταθερή είναι η διανομή που προσπαθείς ανεπιτυχώς να κρασσάρεις
Linux: Low┃Προγραμματισμός: No┃Αγγλικά: Good
Είμαι αναλφάβητος, ανιστόρητος και άξιος της μοίρας μου
Άβαταρ μέλους
Th P
powerTUX
powerTUX
 
Δημοσιεύσεις: 1981
Εγγραφή: 02 Μάιος 2009, 10:46
Τοποθεσία: Θεσσαλονίκη
IRC: ThP1
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό pc_magas » 06 Σεπ 2011, 16:17

Το raw read error rate δεν μου αρέσει αλλά μήπως έχει τιμή επειδή το εκτέλεσα σε φορητό Η/Υ? (το νετμπουκ στην υπογραφή μου)
My blog|Κυπριακή Κοινότητα Ελευθέρου Λογισμικού Λογισμικού ανοικτού Κώδικα
Γνώσεις Linux:Ποτέ αρκετές|Προγραμματισμός: Php, javascript, nodejs, python, bash |Aγγλικά:Καλά
Οι υπολογιστές μου:
Spoiler: show
Ubuntu 16.04 64 bit σεIntel(R) Pentium(R) CPU G4400 @ 3.30GHz, 16Gib Ram, 500Gib Hard Disk, και κάρτα γραφικών Nvidia Geforce GT610
Lubuntu 14.04 σε Dell Inspiron mini 10(1010) intel Atom Z500 1Gb ram και gma500 (εδώθη σε άλλον)
Kubuntu 16.04 Lenovo G70 Intel i5 Nvidia Grapgics Card, Intel Graphics card (έχει 2) με Nouveau, 16Gb RAM, 126GB SSD Σκληρό Δίσκο
Άβαταρ μέλους
pc_magas
powerTUX
powerTUX
 
Δημοσιεύσεις: 2598
Εγγραφή: 12 Απρ 2009, 18:55
Τοποθεσία: Αχαρναί Αττικής
Launchpad: pc_magas
IRC: pc_magas
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 06 Σεπ 2011, 16:52

Το raw read error rate είναι ανάλογα με τον κατασκευαστή, δεν πρέπει να είναι απαραίτητα μηδέν. Πρέπει να το δεις μαζί με άλλους δείκτες.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό telis_petsotis » 06 Νοέμ 2011, 21:37

για ριξε κ εδω μια ματια
Κώδικας: Επιλογή όλων
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD1200BEVT-22ZCT0
Serial Number:    WD-WXC708C55676
Firmware Version: 11.01A11
User Capacity:    120.034.123.776 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Nov  6 20:35:49 2011 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:        (4560) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     (  57) minutes.
Conveyance self-test routine
recommended polling time:     (   5) minutes.
SCT capabilities:           (0x303f)   SCT Status supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   159   156   021    Pre-fail  Always       -       1033
  4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2740
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       4151
10 Spin_Retry_Count        0x0033   100   095   051    Pre-fail  Always       -       0
11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1942
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       122
193 Load_Cycle_Count        0x0032   180   180   000    Old_age   Always       -       61253
194 Temperature_Celsius     0x0022   096   084   000    Old_age   Always       -       47
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   100   253   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 24 (device log contains only the most recent five errors)
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 24 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 3c 6c aa 64 e0  Error: UNC 60 sectors at LBA = 0x0064aa6c = 6597228

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 20 3c 6c aa 64 06 00      00:00:59.236  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:56.261  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:53.146  READ DMA EXT
  25 20 04 68 aa 64 06 00      00:00:53.146  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:50.033  READ DMA EXT

Error 23 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 3c 6c aa 64 e0  Error: UNC 60 sectors at LBA = 0x0064aa6c = 6597228

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 20 3c 6c aa 64 06 00      00:00:56.261  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:53.146  READ DMA EXT
  25 20 04 68 aa 64 06 00      00:00:53.146  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:50.033  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:46.923  READ DMA EXT

Error 22 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 3c 6c aa 64 e0  Error: UNC 60 sectors at LBA = 0x0064aa6c = 6597228

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 20 3c 6c aa 64 06 00      00:00:53.146  READ DMA EXT
  25 20 04 68 aa 64 06 00      00:00:53.146  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:50.033  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:46.923  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:43.666  READ DMA EXT

Error 21 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 3c 6c aa 64 e0  Error: UNC 60 sectors at LBA = 0x0064aa6c = 6597228

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 20 3c 6c aa 64 06 00      00:00:50.033  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:46.923  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:43.666  READ DMA EXT
  25 20 04 68 aa 64 06 00      00:00:43.665  READ DMA EXT
  25 20 3b 2d aa 64 06 00      00:00:43.665  READ DMA EXT

Error 20 occurred at disk power-on lifetime: 2134 hours (88 days + 22 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 3c 6c aa 64 e0  Error: UNC 60 sectors at LBA = 0x0064aa6c = 6597228

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 20 3c 6c aa 64 06 00      00:00:46.923  READ DMA EXT
  25 20 3c 6c aa 64 06 00      00:00:43.666  READ DMA EXT
  25 20 04 68 aa 64 06 00      00:00:43.665  READ DMA EXT
  25 20 3b 2d aa 64 06 00      00:00:43.665  READ DMA EXT
  25 20 05 28 aa 64 06 00      00:00:43.665  READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Γνώσεις ⇛ Linux: Ελάχιστο ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Άριστα
Λειτουργικό ⇛ Ubuntu 10.04 32bit / Linux Mint / Lubuntu σε Advent 4211
Άβαταρ μέλους
telis_petsotis
babeTUX
babeTUX
 
Δημοσιεύσεις: 133
Εγγραφή: 30 Μάιος 2009, 23:00
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό Learner » 07 Νοέμ 2011, 02:22

Th P έγραψε:
Έχω παράλληλα και αυτό:


Edit: που μάλλον αφορά αυτό:
Κώδικας: Επιλογή όλων
Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       20


χωρίς να έχω παράξενα κολλήματα κλπ.

Είναι σοβαρό αυτό το σφάλμα;
Διορθώνεται;


Έχω κι εγώ reallocated sectors , στον 250αρι της υπογραφής μου. Δεν μου δημιουργούν κάποιο πρόβλημα όμως. Δοκίμασα να τους διορθώσω με κάποιο πρόγραμμα (spinrite νομίζω λεγόταν) και από 6 γίνανε 12. Αυτό στο λέω για να μην εκτελέσεις τίποτα προγράμματα που και καλά διορθώνουν το πρόβλημα . Ας το όπως είναι αρκεί να μην αυξάνονται με τον καιρό . Εμένα είναι σταθεροί τώρα 1-2 μήνες περίπου.
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9765
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό airmaik » 17 Νοέμ 2011, 16:55

εκανα εναν ελεγχο στον σκληρο μου και ειδα αυτην την εικονα

http://img812.imageshack.us/img812/9615/screenshotat20111117134.png

μετα δινω και αυτο

Κώδικας: Επιλογή όλων
    sudo smartctl -a /dev/sda


και μου βγαζει αυτα

Κώδικας: Επιλογή όλων
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-12-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12
Device Model:     ST3500418AS
Serial Number:    6VM1NHT1
LU WWN Device Id: 5 000c50 014019626
Firmware Version: CC34
User Capacity:    500,106,780,160 bytes [500 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Nov 17 13:54:05 2011 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)   Offline data collection activity
               was completed without error.
               Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)   The previous self-test routine completed
               without error or no self-test has ever
               been run.
Total time to complete Offline
data collection:       (  600) seconds.
Offline data collection
capabilities:           (0x7b) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               Offline surface scan supported.
               Self-test supported.
               Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   1) minutes.
Extended self-test routine
recommended polling time:     (  90) minutes.
Conveyance self-test routine
recommended polling time:     (   2) minutes.
SCT capabilities:           (0x103f)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   116   099   006    Pre-fail  Always       -       103419890
  3 Spin_Up_Time            0x0003   098   097   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   099   099   020    Old_age   Always       -       1358
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       22
  7 Seek_Error_Rate         0x000f   082   060   030    Pre-fail  Always       -       180469905
  9 Power_On_Hours          0x0032   092   092   000    Old_age   Always       -       7875
10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
12 Power_Cycle_Count       0x0032   099   099   020    Old_age   Always       -       1359
183 Runtime_Bad_Block       0x0000   100   100   000    Old_age   Offline      -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   099   000    Old_age   Always       -       19
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   070   056   045    Old_age   Always       -       30 (Min/Max 29/30)
194 Temperature_Celsius     0x0022   030   044   000    Old_age   Always       -       30 (0 8 0 0)
195 Hardware_ECC_Recovered  0x001a   041   022   000    Old_age   Always       -       103419890
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       79688823221579
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       847550096
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       2758260502

SMART Error Log Version: 1
ATA Error Count: 2
   CR = Command Register [HEX]
   FR = Features Register [HEX]
   SC = Sector Count Register [HEX]
   SN = Sector Number Register [HEX]
   CL = Cylinder Low Register [HEX]
   CH = Cylinder High Register [HEX]
   DH = Device/Head Register [HEX]
   DC = Device Command Register [HEX]
   ER = Error register [HEX]
   ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 2 occurred at disk power-on lifetime: 5913 hours (246 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ef 81 5e 00  Error: UNC at LBA = 0x005e81ef = 6193647

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 e8 81 5e e0 00      00:00:32.192  READ DMA EXT
  25 00 08 e8 81 5e e0 00      00:00:29.520  READ DMA EXT
  25 00 80 08 8e 7f e0 00      00:00:29.519  READ DMA EXT
  25 00 80 88 8d 7f e0 00      00:00:29.509  READ DMA EXT
  25 00 20 f0 07 5e e0 00      00:00:29.493  READ DMA EXT

Error 1 occurred at disk power-on lifetime: 5913 hours (246 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ef 81 5e 00  Error: UNC at LBA = 0x005e81ef = 6193647

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 e8 81 5e e0 00      00:00:29.520  READ DMA EXT
  25 00 80 08 8e 7f e0 00      00:00:29.519  READ DMA EXT
  25 00 80 88 8d 7f e0 00      00:00:29.509  READ DMA EXT
  25 00 20 f0 07 5e e0 00      00:00:29.493  READ DMA EXT
  25 00 08 ff ff ff ef 00      00:00:29.476  READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


πρεπει να ανυσυχω?
1 Γνώσεις Linux: Πρώτα βήματα ┃ Προγραμματισμού: Καθόλου ┃ Αγγλικών: Πρώτα βήματα
2 Ubuntu 12.04 precise 3.6.3-030603-generic 64bit (el_GR.UTF-8), Ubuntu 3.2.0-32-generic
3 Intel Core i5-3570 CPU @ 3.40GHz ‖ RAM 7941 MiB ‖ ASUSTeK COMPUTER INC. P8Z77-V PRO
4 nVidia GF108 [GeForce GT 440] [10de:0de0] (rev a1)
5 wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) ⋮ eth0: Intel 82579V Gigabit Network Connection [8086:1503] (rev 04)
Άβαταρ μέλους
airmaik
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 376
Εγγραφή: 04 Μάιος 2011, 23:29
Εκτύπωση

Re: Έλεγχος σκληρού δίσκου Hardware

Δημοσίευσηαπό the_eye » 17 Νοέμ 2011, 17:14

airmaik έγραψε:πρεπει να ανυσυχω?


Ναι ! Ο δίσκος σου έχει πρόβλημα.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

ΠροηγούμενηΕπόμενο

Επιστροφή στο Οδηγοί - How to - Tutorials