Έχω την παρακάτω κάρτα τηλεόρασης για την οποία μετά από αρκετά θέματα κατάφερα (με τη βοήθεια του φόρουμ) να βλέπω αναλογικά κανάλια .
Pinnacle HYBRID Pro PCI
Το θέμα όμως τώρα είναι ότι τα αναλογικά κανάλια έπαψαν να αναμεταδίδονται στην Πάτρα και ήρθε η Digea
Από ότι ξέρω η κάρτα έχει ψηφιακό δέκτη (τουλάχιστον έτσι λέει στο site που αγόρασα την κάρτα) .. μπορούμε να την κάνουμε να πιάσει τα ψηφιακά κανάλια ;
- Το tvtime πιάνει μόνο τα αναλογικά ( πιάνει ερτ3 και κάποια τοπικά κανάλια της Πάτρας που δεν έχουν ψηφιακό σήμα)
- Το metv το δοκίμασα αλλά δεν έχει επιλογή για να ψάξω για κανάλια στην Πάτρα παρά μόνο στην Αθήνα
- Το vlc δεν ξέρω πώς ακριβώς να το ρυθμίσω να ψάξει ψηφιακά κανάλια
Έχετε κάποια ιδέα πώς να δουλέψει ;
Παρακάτω παραθέτω αποτελέσματα εντολών που ίσως χρειαστείτε :
To lspci μου δίνει :
- Κώδικας: Επιλογή όλων
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 02)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5
00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV770 [Radeon HD 4850]
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV770 HDMI Audio [Radeon HD 4850/4870]
02:00.0 Ethernet controller: Atheros Communications Inc. AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6121 SATA II Controller (rev b2)
05:02.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
05:03.0 FireWire (IEEE 1394): nee Agere Systems nee Lucent Microelectronics FW322/323 (rev 70)
Το dmesg :
- Κώδικας: Επιλογή όλων
[ 0.705126] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.705155] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.705244] hub 8-0:1.0: USB hub found
[ 0.705247] hub 8-0:1.0: 2 ports detected
[ 0.705350] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.708148] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.708152] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.708250] mousedev: PS/2 mouse device common for all mice
[ 0.708351] rtc_cmos 00:03: RTC can wake from S4
[ 0.708394] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.708414] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.708476] device-mapper: uevent: version 1.0.3
[ 0.708536] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 0.708579] device-mapper: multipath: version 1.2.0 loaded
[ 0.708581] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.708636] EISA: Probing bus 0 at eisa.0
[ 0.708638] EISA: Cannot allocate resource for mainboard
[ 0.708640] Cannot allocate resource for EISA slot 1
[ 0.708641] Cannot allocate resource for EISA slot 2
[ 0.708643] Cannot allocate resource for EISA slot 3
[ 0.708644] Cannot allocate resource for EISA slot 4
[ 0.708645] Cannot allocate resource for EISA slot 5
[ 0.708647] Cannot allocate resource for EISA slot 6
[ 0.708648] Cannot allocate resource for EISA slot 7
[ 0.708649] Cannot allocate resource for EISA slot 8
[ 0.708651] EISA: Detected 0 cards.
[ 0.708688] cpuidle: using governor ladder
[ 0.708690] cpuidle: using governor menu
[ 0.708906] TCP cubic registered
[ 0.709006] NET: Registered protocol family 10
[ 0.709449] NET: Registered protocol family 17
[ 0.709460] Registering the dns_resolver key type
[ 0.709488] Using IPI No-Shortcut mode
[ 0.709552] PM: Hibernation image not present or could not be loaded.
[ 0.709562] registered taskstats version 1
[ 0.709813] Magic number: 0:791:278
[ 0.709825] tty tty15: hash matches
[ 0.709870] rtc_cmos 00:03: setting system clock to 2012-02-11 12:17:03 UTC (1328962623)
[ 0.709872] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.709873] EDD information not available.
[ 0.990514] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.001174] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.124013] usb 2-6: new high speed USB device using ehci_hcd and address 4
[ 1.244010] Refined TSC clocksource calibration: 2999.658 MHz.
[ 1.244015] Switching to clocksource tsc
[ 1.456054] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.456064] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.456232] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.456242] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.456250] ata2.01: link offline, clearing class 3 to NONE
[ 1.464117] ata1.00: ATA-8: WDC WD6400AAKS-65A7B0, 01.03B01, max UDMA/133
[ 1.464120] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.464223] ata2.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL02, max UDMA/100
[ 1.480190] ata1.00: configured for UDMA/133
[ 1.480196] ata2.00: configured for UDMA/100
[ 1.480283] scsi 0:0:0:0: Direct-Access ATA WDC WD6400AAKS-6 01.0 PQ: 0 ANSI: 5
[ 1.480380] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 1.480390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.480419] sd 0:0:0:0: [sda] Write Protect is off
[ 1.480421] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.480440] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.488752] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL02 PQ: 0 ANSI: 5
[ 1.494173] sda: sda1 sda2 sda3
[ 1.494446] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.497175] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.497178] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.497276] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.497336] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.497438] Freeing unused kernel memory: 700k freed
[ 1.497646] Write protecting the kernel text: 5192k
[ 1.497678] Write protecting the kernel read-only data: 2152k
[ 1.508009] usb 7-2: new low speed USB device using uhci_hcd and address 2
[ 1.511568] <30>udev[72]: starting version 167
[ 1.585347] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.585358] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.591252] ahci 0000:03:00.0: version 3.0
[ 1.593228] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.593252] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.596139] scsi4 : pata_marvell
[ 1.598525] scsi5 : pata_marvell
[ 1.598563] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.598565] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[ 1.603008] usbcore: registered new interface driver uas
[ 1.704614] usbcore: registered new interface driver usbhid
[ 1.704616] usbhid: USB HID core driver
[ 1.929869] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.931712] Initializing USB Mass Storage driver...
[ 1.931947] scsi6 : usb-storage 2-6:1.2
[ 1.932124] usbcore: registered new interface driver usb-storage
[ 1.932126] USB Mass Storage support registered.
[ 1.933861] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.936008] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 1.956233] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input2
[ 1.956305] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input0
[ 1.984058] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[ 2.043986] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[ 2.094143] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input3
[ 2.094227] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.1-2/input1
[ 2.155284] generic-usb 0003:0665:5161.0003: hiddev0,hidraw2: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1d.2-1/input0
[ 2.484082] firewire_core: created device fw0: GUID 001e8c00015fd8da, S400
[ 2.934760] scsi 6:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2
[ 2.935176] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2.941992] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 14.048921] <30>udev[319]: starting version 167
[ 14.071465] Adding 2395132k swap on /dev/sda2. Priority:-1 extents:1 across:2395132k
[ 14.083659] lp: driver loaded but no devices found
[ 14.212927] type=1400 audit(1328962637.000:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=572 comm="apparmor_parser"
[ 14.213554] type=1400 audit(1328962637.000:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=572 comm="apparmor_parser"
[ 14.213950] type=1400 audit(1328962637.000:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=572 comm="apparmor_parser"
[ 14.319261] [drm] Initialized drm 1.1.0 20060810
[ 14.343108] Linux video capture interface: v2.00
[ 14.362998] IR NEC protocol handler initialized
[ 14.367377] IR RC5(x) protocol handler initialized
[ 14.373172] IR RC6 protocol handler initialized
[ 14.381488] IR JVC protocol handler initialized
[ 14.387735] [drm] radeon defaulting to kernel modesetting.
[ 14.387736] [drm] radeon kernel modesetting enabled.
[ 14.387781] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.387785] radeon 0000:01:00.0: setting latency timer to 64
[ 14.388692] [drm] initializing kernel modesetting (RV770 0x1002:0x9442).
[ 14.388709] [drm] register mmio base: 0xFE8E0000
[ 14.388711] [drm] register mmio size: 65536
[ 14.388805] ATOM BIOS: Wekiva
[ 14.388826] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[ 14.388828] radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF
[ 14.390105] [drm] Detected VRAM RAM=512M, BAR=256M
[ 14.390108] [drm] RAM width 256bits DDR
[ 14.392605] IR Sony protocol handler initialized
[ 14.392873] [TTM] Zone kernel: Available graphics memory: 436254 kiB.
[ 14.392875] [TTM] Zone highmem: Available graphics memory: 1029890 kiB.
[ 14.392877] [TTM] Initializing pool allocator.
[ 14.392889] [drm] radeon: 512M of VRAM memory ready
[ 14.392890] [drm] radeon: 512M of GTT memory ready.
[ 14.392902] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 14.392904] [drm] Driver supports precise vblank timestamp query.
[ 14.392936] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
[ 14.392941] radeon 0000:01:00.0: radeon: using MSI.
[ 14.392964] [drm] radeon: irq initialized.
[ 14.392966] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 14.393314] [drm] Loading RV770 Microcode
[ 14.394194] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 14.394230] saa7134 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 14.394235] saa7133[0]: found at 0000:05:02.0, rev: 209, irq: 18, latency: 64, mmio: 0xfebff800
[ 14.394240] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV 310i [card=101,autodetected]
[ 14.394251] saa7133[0]: board init: gpio is 600e000
[ 14.397924] lirc_dev: IR Remote Control driver registered, major 249
[ 14.398936] IR LIRC bridge handler initialized
[ 14.404147] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x084A
[ 14.404202] usbcore: registered new interface driver usblp
[ 14.409827] radeon 0000:01:00.0: WB enabled
[ 14.436278] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 14.436312] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 14.436331] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 14.455887] [drm] ring test succeeded in 1 usecs
[ 14.456183] [drm] radeon: ib pool ready.
[ 14.456241] [drm] ib test succeeded in 0 usecs
[ 14.456243] [drm] Enabling audio support
[ 14.456249] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 14.457508] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 14.457652] [drm] Radeon Display Connectors
[ 14.457653] [drm] Connector 0:
[ 14.457654] [drm] DVI-I
[ 14.457656] [drm] HPD1
[ 14.457657] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
[ 14.457659] [drm] Encoders:
[ 14.457660] [drm] DFP1: INTERNAL_UNIPHY
[ 14.457661] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 14.457662] [drm] Connector 1:
[ 14.457663] [drm] DIN
[ 14.457664] [drm] Encoders:
[ 14.457666] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 14.457667] [drm] Connector 2:
[ 14.457668] [drm] DVI-I
[ 14.457669] [drm] HPD2
[ 14.457670] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[ 14.457672] [drm] Encoders:
[ 14.457673] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 14.457674] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 14.544016] saa7133[0]: i2c eeprom 00: bd 11 2f 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 14.544024] saa7133[0]: i2c eeprom 10: ff e0 60 06 ff 20 ff ff 00 30 8d 2f d4 d0 ff ff
[ 14.544031] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e7 ff 21 00 c2
[ 14.544038] saa7133[0]: i2c eeprom 30: 96 10 03 32 15 20 ff 15 0e 6c a3 eb 04 4f 42 01
[ 14.544045] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544052] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544059] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544066] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544073] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544080] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544087] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544094] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544101] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544108] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544115] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.544122] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.549568] [drm] Internal thermal controller with fan control
[ 14.549624] [drm] radeon: power management initialized
[ 14.553785] i2c-core: driver [tuner] using legacy suspend method
[ 14.553787] i2c-core: driver [tuner] using legacy resume method
[ 14.580064] tuner 5-004b: chip found @ 0x96 (saa7133[0])
[ 14.633468] [drm] fb mappable at 0xD0142000
[ 14.633470] [drm] vram apper at 0xD0000000
[ 14.633471] [drm] size 7299072
[ 14.633472] [drm] fb depth is 24
[ 14.633473] [drm] pitch is 6912
[ 14.633530] fbcon: radeondrmfb (fb0) is primary device
[ 14.633645] Console: switching to colour frame buffer device 210x65
[ 14.633678] fb0: radeondrmfb frame buffer device
[ 14.633679] drm: registered panic notifier
[ 14.633684] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:00.0 on minor 0
[ 14.633716] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 14.633755] HDA Intel 0000:01:00.1: irq 46 for MSI/MSI-X
[ 14.633774] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 14.649557] hda-intel: Enable sync_write for AMD chipset
[ 14.660013] tda829x 5-004b: setting tuner address to 61
[ 14.724004] tda829x 5-004b: type set to tda8290+75a
[ 14.907130] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 18.476079] saa7133[0]: registered device video0 [v4l2]
[ 18.476117] saa7133[0]: registered device vbi0
[ 18.476154] saa7133[0]: registered device radio0
[ 18.485387] saa7134 ALSA driver for DMA sound loaded
[ 18.485410] saa7133[0]/alsa: saa7133[0] at 0xfebff800 irq 18 registered as card -2
[ 18.487064] dvb_init() allocating 1 frontend
[ 18.720075] DVB: registering new adapter (saa7133[0])
[ 18.720078] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 19.000017] tda1004x: setting up plls for 48MHz sampling clock
[ 20.110867] ppdev: user-space parallel port driver
[ 20.128836] type=1400 audit(1328962642.916:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=984 comm="apparmor_parser"
[ 20.131301] type=1400 audit(1328962642.916:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=985 comm="apparmor_parser"
[ 20.132369] type=1400 audit(1328962642.920:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=985 comm="apparmor_parser"
[ 20.132768] type=1400 audit(1328962642.920:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=985 comm="apparmor_parser"
[ 20.133194] type=1400 audit(1328962642.920:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=992 comm="apparmor_parser"
[ 20.133924] type=1400 audit(1328962642.920:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=992 comm="apparmor_parser"
[ 20.145722] type=1400 audit(1328962642.932:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=994 comm="apparmor_parser"
[ 20.154194] type=1400 audit(1328962642.940:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=999 comm="apparmor_parser"
[ 20.156785] type=1400 audit(1328962642.944:13): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=999 comm="apparmor_parser"
[ 20.158317] type=1400 audit(1328962642.944:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=994 comm="apparmor_parser"
[ 20.197894] ATL1E 0000:02:00.0: irq 47 for MSI/MSI-X
[ 20.198010] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 21.244009] tda1004x: timeout waiting for DSP ready
[ 21.284006] tda1004x: found firmware revision 0 -- invalid
[ 21.284009] tda1004x: trying to boot from eeprom
[ 21.872242] usb 2-6: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
[ 23.612006] tda1004x: timeout waiting for DSP ready
[ 23.652005] tda1004x: found firmware revision 0 -- invalid
[ 23.652008] tda1004x: waiting for firmware upload...
[ 23.654673] tda1004x: no firmware upload (timeout or file not found?)
[ 23.654676] tda1004x: firmware upload failed
[ 25.913074] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 27.460894] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.510938] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 30.512003] eth0: no IPv6 routers present
[ 6060.711149] process `skype' is using obsolete setsockopt SO_BSDCOMPAT
[11363.460207] ATL1E 0000:02:00.0: eth0: rx sequence number error (rx=20455) (expect=4857)
[11363.476185] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[67633.017133] show_signal_msg: 6 callbacks suppressed
[67633.017136] chrome[14158]: segfault at 6 ip b18d578e sp bfae84a0 error 4 in libgcflashplayer.so[b1108000+fc8000]
[76709.136007] tda1004x: setting up plls for 48MHz sampling clock
[76711.380012] tda1004x: timeout waiting for DSP ready
[76711.420020] tda1004x: found firmware revision 0 -- invalid
[76711.420023] tda1004x: trying to boot from eeprom
[76713.752016] tda1004x: timeout waiting for DSP ready
[76713.792012] tda1004x: found firmware revision 0 -- invalid
[76713.792014] tda1004x: waiting for firmware upload...
[76713.900918] tda1004x: no firmware upload (timeout or file not found?)
[76713.900920] tda1004x: firmware upload failed
[77344.044025] tda827xa_set_params: could not write to tuner at addr: 0xc2
[77520.836007] tda1004x: setting up plls for 48MHz sampling clock
[77523.080007] tda1004x: timeout waiting for DSP ready
[77523.120007] tda1004x: found firmware revision 0 -- invalid
[77523.120009] tda1004x: trying to boot from eeprom
[77525.452008] tda1004x: timeout waiting for DSP ready
[77525.492007] tda1004x: found firmware revision 0 -- invalid
[77525.492009] tda1004x: waiting for firmware upload...
[77525.494971] tda1004x: no firmware upload (timeout or file not found?)
[77525.494974] tda1004x: firmware upload failed
[77534.368005] tda1004x: setting up plls for 48MHz sampling clock
[77536.612006] tda1004x: timeout waiting for DSP ready
[77536.652007] tda1004x: found firmware revision 0 -- invalid
[77536.652009] tda1004x: trying to boot from eeprom
[77538.980006] tda1004x: timeout waiting for DSP ready
[77539.020007] tda1004x: found firmware revision 0 -- invalid
[77539.020010] tda1004x: waiting for firmware upload...
[77539.022810] tda1004x: no firmware upload (timeout or file not found?)
[77539.022812] tda1004x: firmware upload failed
[77547.588006] tda1004x: setting up plls for 48MHz sampling clock
[77549.832006] tda1004x: timeout waiting for DSP ready
[77549.872007] tda1004x: found firmware revision 0 -- invalid
[77549.872009] tda1004x: trying to boot from eeprom
[77552.200006] tda1004x: timeout waiting for DSP ready
[77552.240007] tda1004x: found firmware revision 0 -- invalid
[77552.240009] tda1004x: waiting for firmware upload...
[77552.243252] tda1004x: no firmware upload (timeout or file not found?)
[77552.243255] tda1004x: firmware upload failed
[77640.544008] tda1004x: setting up plls for 48MHz sampling clock
[77642.788007] tda1004x: timeout waiting for DSP ready
[77642.828006] tda1004x: found firmware revision 0 -- invalid
[77642.828008] tda1004x: trying to boot from eeprom
[77645.156006] tda1004x: timeout waiting for DSP ready
[77645.196006] tda1004x: found firmware revision 0 -- invalid
[77645.196008] tda1004x: waiting for firmware upload...
[77645.198868] tda1004x: no firmware upload (timeout or file not found?)
[77645.198870] tda1004x: firmware upload failed
[78508.976007] tda1004x: setting up plls for 48MHz sampling clock
[78511.220009] tda1004x: timeout waiting for DSP ready
[78511.260007] tda1004x: found firmware revision 0 -- invalid
[78511.260010] tda1004x: trying to boot from eeprom
[78513.588007] tda1004x: timeout waiting for DSP ready
[78513.628007] tda1004x: found firmware revision 0 -- invalid
[78513.628009] tda1004x: waiting for firmware upload...
[78513.632734] tda1004x: no firmware upload (timeout or file not found?)
[78513.632737] tda1004x: firmware upload failed
[78518.356005] tda1004x: setting up plls for 48MHz sampling clock
[78520.600006] tda1004x: timeout waiting for DSP ready
[78520.640006] tda1004x: found firmware revision 0 -- invalid
[78520.640008] tda1004x: trying to boot from eeprom
[78522.968007] tda1004x: timeout waiting for DSP ready
[78523.008012] tda1004x: found firmware revision 0 -- invalid
[78523.008015] tda1004x: waiting for firmware upload...
[78523.010923] tda1004x: no firmware upload (timeout or file not found?)
[78523.010926] tda1004x: firmware upload failed
[78605.717649] ISO 9660 Extensions: Microsoft Joliet Level 3
[78605.741783] ISOFS: changing to secondary root
[78795.011588] VFS: busy inodes on changed media or resized disk sr0
[79539.160005] tda1004x: setting up plls for 48MHz sampling clock
[79541.404007] tda1004x: timeout waiting for DSP ready
[79541.444007] tda1004x: found firmware revision 0 -- invalid
[79541.444009] tda1004x: trying to boot from eeprom
[79543.772007] tda1004x: timeout waiting for DSP ready
[79543.812007] tda1004x: found firmware revision 0 -- invalid
[79543.812010] tda1004x: waiting for firmware upload...
[79543.832077] tda1004x: no firmware upload (timeout or file not found?)
[79543.832079] tda1004x: firmware upload failed
[79548.972005] tda1004x: setting up plls for 48MHz sampling clock
[79551.216007] tda1004x: timeout waiting for DSP ready
[79551.256007] tda1004x: found firmware revision 0 -- invalid
[79551.256010] tda1004x: trying to boot from eeprom
[79553.584007] tda1004x: timeout waiting for DSP ready
[79553.624006] tda1004x: found firmware revision 0 -- invalid
[79553.624008] tda1004x: waiting for firmware upload...
[79553.626712] tda1004x: no firmware upload (timeout or file not found?)
[79553.626714] tda1004x: firmware upload failed
[79660.444007] tda1004x: setting up plls for 48MHz sampling clock
[79662.688006] tda1004x: timeout waiting for DSP ready
[79662.728019] tda1004x: found firmware revision 0 -- invalid
[79662.728022] tda1004x: trying to boot from eeprom
[79665.056008] tda1004x: timeout waiting for DSP ready
[79665.096005] tda1004x: found firmware revision 0 -- invalid
[79665.096008] tda1004x: waiting for firmware upload...
[79665.098829] tda1004x: no firmware upload (timeout or file not found?)
[79665.098831] tda1004x: firmware upload failed
[80562.644012] tda1004x: setting up plls for 48MHz sampling clock
[80564.888124] tda1004x: timeout waiting for DSP ready
[80564.928009] tda1004x: found firmware revision 0 -- invalid
[80564.928013] tda1004x: trying to boot from eeprom
[80567.256006] tda1004x: timeout waiting for DSP ready
[80567.296005] tda1004x: found firmware revision 0 -- invalid
[80567.296008] tda1004x: waiting for firmware upload...
[80567.298988] tda1004x: no firmware upload (timeout or file not found?)
[80567.298991] tda1004x: firmware upload failed
[80607.328007] tda1004x: setting up plls for 48MHz sampling clock
[80608.140014] tda1004x: found firmware revision 0 -- invalid
[80608.140017] tda1004x: trying to boot from eeprom
[80610.468006] tda1004x: timeout waiting for DSP ready
[80610.508006] tda1004x: found firmware revision 0 -- invalid
[80610.508009] tda1004x: waiting for firmware upload...
[80610.511243] tda1004x: no firmware upload (timeout or file not found?)
[80610.511245] tda1004x: firmware upload failed
[80823.152008] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80864.709100] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80875.076013] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80881.056009] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80891.480016] tda827xa_set_params: could not write to tuner at addr: 0xc2
[80940.604007] tda827xa_set_params: could not write to tuner at addr: 0xc2
[81229.836008] tda1004x: setting up plls for 48MHz sampling clock
[81232.080007] tda1004x: timeout waiting for DSP ready
[81232.120009] tda1004x: found firmware revision 0 -- invalid
[81232.120012] tda1004x: trying to boot from eeprom
[81234.448008] tda1004x: timeout waiting for DSP ready
[81234.488008] tda1004x: found firmware revision 0 -- invalid
[81234.488011] tda1004x: waiting for firmware upload...
[81234.490884] tda1004x: no firmware upload (timeout or file not found?)
[81234.490886] tda1004x: firmware upload failed
[81234.552081] DVB: adapter 0 frontend 0 frequency 658000 out of range (51000000..858000000)
[81271.924009] tda1004x: setting up plls for 48MHz sampling clock
[81274.168006] tda1004x: timeout waiting for DSP ready
[81274.208008] tda1004x: found firmware revision 0 -- invalid
[81274.208011] tda1004x: trying to boot from eeprom
[81276.536008] tda1004x: timeout waiting for DSP ready
[81276.576008] tda1004x: found firmware revision 0 -- invalid
[81276.576011] tda1004x: waiting for firmware upload...
[81276.579332] tda1004x: no firmware upload (timeout or file not found?)
[81276.579334] tda1004x: firmware upload failed
[81276.640080] DVB: adapter 0 frontend 0 frequency 6580000 out of range (51000000..858000000)
[81289.320006] tda1004x: setting up plls for 48MHz sampling clock
[81291.564008] tda1004x: timeout waiting for DSP ready
[81291.604008] tda1004x: found firmware revision 0 -- invalid
[81291.604011] tda1004x: trying to boot from eeprom
[81293.932005] tda1004x: timeout waiting for DSP ready
[81293.972007] tda1004x: found firmware revision 0 -- invalid
[81293.972011] tda1004x: waiting for firmware upload...
[81293.974930] tda1004x: no firmware upload (timeout or file not found?)
[81293.974933] tda1004x: firmware upload failed
[81324.037733] DVB: adapter 0 frontend 0 frequency 658000 out of range (51000000..858000000)
[81331.796008] tda1004x: setting up plls for 48MHz sampling clock
[81334.040010] tda1004x: timeout waiting for DSP ready
[81334.080008] tda1004x: found firmware revision 0 -- invalid
[81334.080011] tda1004x: trying to boot from eeprom
[81336.408007] tda1004x: timeout waiting for DSP ready
[81336.448007] tda1004x: found firmware revision 0 -- invalid
[81336.448010] tda1004x: waiting for firmware upload...
[81336.451166] tda1004x: no firmware upload (timeout or file not found?)
[81336.451169] tda1004x: firmware upload failed
[81383.776082] DVB: adapter 0 frontend 0 frequency 44000 out of range (51000000..858000000)
[81626.116008] tda1004x: setting up plls for 48MHz sampling clock
[81628.360045] tda1004x: timeout waiting for DSP ready
[81628.400006] tda1004x: found firmware revision 0 -- invalid
[81628.400008] tda1004x: trying to boot from eeprom
[81630.728007] tda1004x: timeout waiting for DSP ready
[81630.768006] tda1004x: found firmware revision 0 -- invalid
[81630.768008] tda1004x: waiting for firmware upload...
[81630.772778] tda1004x: no firmware upload (timeout or file not found?)
[81630.772781] tda1004x: firmware upload failed
[81644.340005] tda1004x: setting up plls for 48MHz sampling clock
[81646.584006] tda1004x: timeout waiting for DSP ready
[81646.624005] tda1004x: found firmware revision 0 -- invalid
[81646.624007] tda1004x: trying to boot from eeprom
[81648.952008] tda1004x: timeout waiting for DSP ready
[81648.992008] tda1004x: found firmware revision 0 -- invalid
[81648.992010] tda1004x: waiting for firmware upload...
[81648.994850] tda1004x: no firmware upload (timeout or file not found?)
[81648.994853] tda1004x: firmware upload failed
[81823.458363] zapping[31797]: segfault at 2020024 ip 016d1a41 sp bfc3ace8 error 6 in libc-2.13.so[15be000+15a000]
Ευχαριστώ εκ των προτέρων