No wifi, agere 11c1:ab34, HP zv5000, Lubuntu 12.10

[Learner]

Παιδια καλησπερα.Προσφατα μου εφεραν ενα laptop της HP (zv5000) και μια καρτα δικτυου agere wl60010.
To HP εχει lubuntu 12.10 και με τις εντολες που αναγραφονται πιο πανω ,δινει τα εξης:

Κώδικας: Επιλογή όλων

00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI Radeon 9100 IGP Host Bridge [1002:5833] (rev 02)
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI Radeon 9100 IGP AGP Bridge [1002:5838]
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI OHCI USB Controller #1 [1002:4347] (rev 01)
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI OHCI USB Controller #2 [1002:4348] (rev 01)
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SMBus [1002:4353] (rev 16)
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI Dual Channel Bus Master PCI IDE Controller [1002:4349]
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI Device [1002:434c]
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI IXP200 3COM 3C920B Ethernet Controller [1002:4342]
00:14.5 Multimedia audio controller [0401]: Advanced Micro Devices [AMD] nee ATI IXP150 AC'97 Audio Controller [1002:4341]
00:14.6 Modem [0703]: Advanced Micro Devices [AMD] nee ATI IXP AC'97 Modem [1002:434d] (rev 01)
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS300M AGP [Radeon Mobility 9100IGP] [1002:5835]
02:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026]
02:02.0 Network controller [0280]: LSI Corporation Device [11c1:ab34]
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
02:04.0 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
02:04.1 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
02:04.2 System peripheral [0880]: Texas Instruments PCI1620 Firmware Loading Function [104c:8201] (rev 01)
02:07.0 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
02:07.1 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
02:07.2 USB controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
aggelos@Pavilion-zv5000:~$ lsusb
Bus 005 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
aggelos@Pavilion-zv5000:~$ rfkill list
aggelos@Pavilion-zv5000:~$ lspci -nn
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI Radeon 9100 IGP Host Bridge [1002:5833] (rev 02)
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI Radeon 9100 IGP AGP Bridge [1002:5838]
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI OHCI USB Controller #1 [1002:4347] (rev 01)
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI OHCI USB Controller #2 [1002:4348] (rev 01)
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SMBus [1002:4353] (rev 16)
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI Dual Channel Bus Master PCI IDE Controller [1002:4349]
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI Device [1002:434c]
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI IXP200 3COM 3C920B Ethernet Controller [1002:4342]
00:14.5 Multimedia audio controller [0401]: Advanced Micro Devices [AMD] nee ATI IXP150 AC'97 Audio Controller [1002:4341]
00:14.6 Modem [0703]: Advanced Micro Devices [AMD] nee ATI IXP AC'97 Modem [1002:434d] (rev 01)
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS300M AGP [Radeon Mobility 9100IGP] [1002:5835]
02:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026]
02:02.0 Network controller [0280]: LSI Corporation Device [11c1:ab34]
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
02:04.0 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
02:04.1 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
02:04.2 System peripheral [0880]: Texas Instruments PCI1620 Firmware Loading Function [104c:8201] (rev 01)
02:07.0 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
02:07.1 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
02:07.2 USB controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
aggelos@Pavilion-zv5000:~$ clear

aggelos@Pavilion-zv5000:~$ lspci -nn
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI Radeon 9100 IGP Host Bridge [1002:5833] (rev 02)
00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI Radeon 9100 IGP AGP Bridge [1002:5838]
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI OHCI USB Controller #1 [1002:4347] (rev 01)
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI OHCI USB Controller #2 [1002:4348] (rev 01)
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SMBus [1002:4353] (rev 16)
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI Dual Channel Bus Master PCI IDE Controller [1002:4349]
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI Device [1002:434c]
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI IXP200 3COM 3C920B Ethernet Controller [1002:4342]
00:14.5 Multimedia audio controller [0401]: Advanced Micro Devices [AMD] nee ATI IXP150 AC'97 Audio Controller [1002:4341]
00:14.6 Modem [0703]: Advanced Micro Devices [AMD] nee ATI IXP AC'97 Modem [1002:434d] (rev 01)
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS300M AGP [Radeon Mobility 9100IGP] [1002:5835]
02:00.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026]
02:02.0 Network controller [0280]: LSI Corporation Device [11c1:ab34]
02:03.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
02:04.0 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
02:04.1 CardBus bridge [0607]: Texas Instruments PCI1620 PC Card Controller [104c:ac54] (rev 01)
02:04.2 System peripheral [0880]: Texas Instruments PCI1620 Firmware Loading Function [104c:8201] (rev 01)
02:07.0 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
02:07.1 USB controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
02:07.2 USB controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)


και

Κώδικας: Επιλογή όλων

Bus 005 Device 002: ID 046d:c52f Logitech, Inc. Wireless Mouse M305
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


η rfkill list δεν δινει κατι. Καμια ελπιδα για σωτηρια υπαρχει,πως το βλεπετε?

[the_eye]

Για δώσε και την εντολή

Κώδικας: Επιλογή όλων

iwconfig

και άμα μπορείς δώσε μας και την υπογραφή του μηχανήματος.

[infin1ty]

Για δώσε και την εντολή

Κώδικας: Επιλογή όλων

iwconfig

και άμα μπορείς δώσε μας και την υπογραφή του μηχανήματος.

Κώδικας: Επιλογή όλων

lo no wireless extensions.

eth0 no wireless extensions.

και

Ubuntu 12.10 quantal 3.5.0-25-generic 32bit (el_GR.UTF-8, LXDE Lubuntu), Ubuntu 3.5.0-17-generic
3 Intel Pentium 4 CPU 3.00GHz ‖ RAM 432 MiB ‖ Hewlett-Packard 089C - Hewlett-Packard Pavilion zv5000 (PJ883EA#B1A)
4 AMD nee ATI RS300M AGP [Radeon Mobility 9100IGP] [1002:5835] {radeon}
5 eth0: Realtek RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)

[the_eye]

Δώσε μας και το αποτέλεσμα του

Κώδικας: Επιλογή όλων

dmesg

[Learner]

Καμια ελπιδα για σωτηρια υπαρχει,πως το βλεπετε?

Μάλλον σε βλέπω για NdisWrapper. Όσο και να «googlαρα» δεν βρήκα κάτι σε native linux.
Οπότε ακολουθείς τον οδηγό εδώ. Πρέπει βέβαια να βρεις τους drivers από WindowsXp (ή και 7 , νομίζω κάνει).

[madvinegar]

Μάλλον σε βλέπω για NdisWrapper.

Σωστος ο Learner. Και εγω που κοιταξα, μονο αναφορές σε ndiswrapper βρηκα.
Drivers απο XP μαλλον θελει. Δεν μου εχει τυχει να χρησιμοποιησω drivers απο win7.

[infin1ty]

Δώσε μας και το αποτέλεσμα του

Κώδικας: Επιλογή όλων

dmesg

Κώδικας: Επιλογή όλων

[ 0.004072] AppArmor: AppArmor initialized
[ 0.004075] Yama: becoming mindful.
[ 0.004152] Mount-cache hash table entries: 512
[ 0.004465] Initializing cgroup subsys cpuacct
[ 0.004471] Initializing cgroup subsys memory
[ 0.004485] Initializing cgroup subsys devices
[ 0.004488] Initializing cgroup subsys freezer
[ 0.004491] Initializing cgroup subsys blkio
[ 0.004494] Initializing cgroup subsys perf_event
[ 0.004546] CPU: Physical Processor ID: 0
[ 0.004549] CPU: Processor Core ID: 0
[ 0.004553] mce: CPU supports 4 MCE banks
[ 0.004568] CPU0: Thermal monitoring enabled (TM1)
[ 0.004574] using mwait in idle threads.
[ 0.009295] ACPI: Core revision 20120320
[ 0.012044] ftrace: allocating 24614 entries in 49 pages
[ 0.024163] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.028001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.028001] ..... (found apic 0 pin 2) ...
[ 0.068224] ....... works.
[ 0.068228] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[ 0.072003] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.072003] ... version: 0
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 18
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 0000007fffffffff
[ 0.072003] ... fixed-purpose events: 0
[ 0.072003] ... event mask: 000000000003ffff
[ 0.072003] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.072003] CPU 1 irqstacks, hard=db4b6000 soft=db4c8000
[ 0.072003] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.080132] Brought up 2 CPUs
[ 0.080142] Total of 2 processors activated (12000.03 BogoMIPS).
[ 0.084137] devtmpfs: initialized
[ 0.084328] EVM: security.selinux
[ 0.084331] EVM: security.SMACK64
[ 0.084334] EVM: security.capability
[ 0.084360] PM: Registering ACPI NVS region [mem 0x1bf7d000-0x1bf7ffff] (12288 bytes)
[ 0.085865] dummy:
[ 0.085899] RTC time: 20:13:41, date: 03/16/13
[ 0.085968] NET: Registered protocol family 16
[ 0.085988] Trying to unpack rootfs image as initramfs...
[ 0.085988] EISA bus registered
[ 0.085988] ACPI: bus type pci registered
[ 0.085988] PCI: PCI BIOS revision 2.10 entry at 0xfd968, last bus=2
[ 0.085988] PCI: Using configuration type 1 for base access
[ 0.087179] bio: create slab <bio-0> at 0
[ 0.087397] ACPI: Added _OSI(Module Device)
[ 0.087403] ACPI: Added _OSI(Processor Device)
[ 0.087408] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.087413] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.089035] ACPI: EC: Look up EC in DSDT
[ 0.092934] ACPI: Interpreter enabled
[ 0.092960] ACPI: (supports S0 S3 S4 S5)
[ 0.093000] ACPI: BIOS offers _GTS
[ 0.093004] ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
[ 0.093010] ACPI: Using IOAPIC for interrupt routing
[ 0.156612] ACPI: EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[ 0.156844] ACPI: No dock devices found.
[ 0.156860] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.157912] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.159845] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.159854] pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.159861] pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.159869] pci_root PNP0A03:00: host bridge window [mem 0x1c000000-0xfebfffff] (ignored)
[ 0.159875] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.159882] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.159887] PCI: root bus 00: using default resources
[ 0.159977] PCI host bridge to bus 0000:00
[ 0.159990] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.159996] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
[ 0.160050] pci 0000:00:00.0: [1002:5833] type 00 class 0x060000
[ 0.160069] pci 0000:00:00.0: reg 10: [mem 0xea000000-0xebffffff pref]
[ 0.160085] pci 0000:00:00.0: reg 14: [mem 0xe8000000-0xe8000fff]
[ 0.160165] pci 0000:00:01.0: [1002:5838] type 01 class 0x060400
[ 0.160235] pci 0000:00:13.0: [1002:4347] type 00 class 0x0c0310
[ 0.160254] pci 0000:00:13.0: reg 10: [mem 0xe8001000-0xe8001fff]
[ 0.160325] pci 0000:00:13.1: [1002:4348] type 00 class 0x0c0310
[ 0.160343] pci 0000:00:13.1: reg 10: [mem 0xe8002000-0xe8002fff]
[ 0.160421] pci 0000:00:14.0: [1002:4353] type 00 class 0x0c0500
[ 0.160438] pci 0000:00:14.0: reg 10: [io 0x8040-0x804f]
[ 0.160452] pci 0000:00:14.0: reg 14: [mem 0x00000000-0x000003ff]
[ 0.160524] pci 0000:00:14.1: [1002:4349] type 00 class 0x01018a
[ 0.160548] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7]
[ 0.160563] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7]
[ 0.160589] pci 0000:00:14.1: reg 18: [io 0x0170-0x0177]
[ 0.160603] pci 0000:00:14.1: reg 1c: [io 0x0374-0x0377]
[ 0.160620] pci 0000:00:14.1: reg 20: [io 0x8060-0x806f]
[ 0.160669] pci 0000:00:14.3: [1002:434c] type 00 class 0x060100
[ 0.160747] pci 0000:00:14.4: [1002:4342] type 01 class 0x060401
[ 0.160796] pci 0000:00:14.5: [1002:4341] type 00 class 0x040100
[ 0.160815] pci 0000:00:14.5: reg 10: [mem 0xe8003000-0xe80030ff]
[ 0.160884] pci 0000:00:14.6: [1002:434d] type 00 class 0x070300
[ 0.160902] pci 0000:00:14.6: reg 10: [mem 0xe8003400-0xe80034ff]
[ 0.161009] pci 0000:01:05.0: [1002:5835] type 00 class 0x030000
[ 0.161034] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff pref]
[ 0.161048] pci 0000:01:05.0: reg 14: [io 0x9000-0x90ff]
[ 0.161067] pci 0000:01:05.0: reg 18: [mem 0xe8100000-0xe810ffff]
[ 0.161114] pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.161172] pci 0000:01:05.0: supports D1 D2
[ 0.161218] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.161230] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.161239] pci 0000:00:01.0: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.161247] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.161282] pci 0000:02:00.0: [104c:8026] type 00 class 0x0c0010
[ 0.161309] pci 0000:02:00.0: reg 10: [mem 0xe8206000-0xe82067ff]
[ 0.161326] pci 0000:02:00.0: reg 14: [mem 0xe8200000-0xe8203fff]
[ 0.161418] pci 0000:02:00.0: supports D1 D2
[ 0.161424] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.161461] pci 0000:02:02.0: [11c1:ab34] type 00 class 0x028000
[ 0.161483] pci 0000:02:02.0: reg 10: [io 0xa400-0xa43f]
[ 0.161607] pci 0000:02:03.0: [10ec:8139] type 00 class 0x020000
[ 0.161637] pci 0000:02:03.0: reg 10: [io 0xa000-0xa0ff]
[ 0.161654] pci 0000:02:03.0: reg 14: [mem 0xe8206800-0xe82068ff]
[ 0.161743] pci 0000:02:03.0: supports D1 D2
[ 0.161749] pci 0000:02:03.0: PME# supported from D1 D2 D3hot
[ 0.161786] pci 0000:02:04.0: [104c:ac54] type 02 class 0x060700
[ 0.161813] pci 0000:02:04.0: reg 10: [mem 0x00000000-0x00000fff]
[ 0.161854] pci 0000:02:04.0: supports D1 D2
[ 0.161860] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.161895] pci 0000:02:04.1: [104c:ac54] type 02 class 0x060700
[ 0.161926] pci 0000:02:04.1: reg 10: [mem 0x00000000-0x00000fff]
[ 0.161979] pci 0000:02:04.1: supports D1 D2
[ 0.161985] pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162026] pci 0000:02:04.2: [104c:8201] type 00 class 0x088000
[ 0.162050] pci 0000:02:04.2: reg 10: [io 0xa440-0xa47f]
[ 0.162180] pci 0000:02:07.0: [1033:0035] type 00 class 0x0c0310
[ 0.162207] pci 0000:02:07.0: reg 10: [mem 0xe8204000-0xe8204fff]
[ 0.162304] pci 0000:02:07.0: supports D1 D2
[ 0.162311] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162342] pci 0000:02:07.1: [1033:0035] type 00 class 0x0c0310
[ 0.162368] pci 0000:02:07.1: reg 10: [mem 0xe8205000-0xe8205fff]
[ 0.162487] pci 0000:02:07.1: supports D1 D2
[ 0.162494] pci 0000:02:07.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162530] pci 0000:02:07.2: [1033:00e0] type 00 class 0x0c0320
[ 0.162556] pci 0000:02:07.2: reg 10: [mem 0xe8206c00-0xe8206cff]
[ 0.162651] pci 0000:02:07.2: supports D1 D2
[ 0.162657] pci 0000:02:07.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162719] pci 0000:00:14.4: PCI bridge to [bus 02-04] (subtractive decode)
[ 0.162731] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.162739] pci 0000:00:14.4: bridge window [mem 0xe8200000-0xe82fffff]
[ 0.162747] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.162753] pci 0000:00:14.4: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.162761] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.162774] pci 0000:02:04.1: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.162865] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04]
[ 0.162886] pci_bus 0000:00: on NUMA node 0
[ 0.162899] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.163051] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 0.163150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.163462] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.167552] ACPI: PCI Interrupt Link [LNK0] (IRQs 5 10 11) *0, disabled.
[ 0.167663] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 10 11) *0, disabled.
[ 0.167767] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 10 11) *0, disabled.
[ 0.167873] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 10 11) *0, disabled.
[ 0.168212] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.168232] vgaarb: loaded
[ 0.168236] vgaarb: bridge control possible 0000:01:05.0
[ 0.168809] SCSI subsystem initialized
[ 0.172010] libata version 3.00 loaded.
[ 0.172010] ACPI: bus type usb registered
[ 0.172010] usbcore: registered new interface driver usbfs
[ 0.172010] usbcore: registered new interface driver hub
[ 0.172010] usbcore: registered new device driver usb
[ 0.172010] PCI: Using ACPI for IRQ routing
[ 0.172010] PCI: pci_cache_line_size set to 64 bytes
[ 0.172010] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.172010] e820: reserve RAM buffer [mem 0x1bf70000-0x1bffffff]
[ 0.172010] NetLabel: Initializing
[ 0.172010] NetLabel: domain hash size = 128
[ 0.172010] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.172010] NetLabel: unlabeled traffic allowed by default
[ 0.191391] AppArmor: AppArmor Filesystem Enabled
[ 0.191509] pnp: PnP ACPI init
[ 0.191550] ACPI: bus type pnp registered
[ 0.192616] pnp 00:00: [bus 00-ff]
[ 0.192625] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.192631] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.192638] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.192644] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.192650] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.192656] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.192662] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.192668] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.192674] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.192680] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.192686] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.192692] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.192698] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.192704] pnp 00:00: [mem 0x1c000000-0xfebfffff window]
[ 0.192710] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.192716] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.192722] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.192826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.193125] pnp 00:01: [io 0x0000-0x001f]
[ 0.193132] pnp 00:01: [io 0x0080-0x008f]
[ 0.193138] pnp 00:01: [io 0x00c0-0x00df]
[ 0.193151] pnp 00:01: [io 0x040b]
[ 0.193156] pnp 00:01: [io 0x04d6]
[ 0.193163] pnp 00:01: [dma 4]
[ 0.193232] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.193256] pnp 00:02: [io 0x00f0-0x00fe]
[ 0.193283] pnp 00:02: [irq 13]
[ 0.193352] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.193385] pnp 00:03: [io 0x0070-0x0073]
[ 0.193396] pnp 00:03: [irq 8]
[ 0.193465] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.193492] pnp 00:04: [io 0x0061]
[ 0.193578] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.193616] pnp 00:05: [io 0x0060]
[ 0.193622] pnp 00:05: [io 0x0064]
[ 0.193632] pnp 00:05: [irq 1]
[ 0.193719] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.193745] pnp 00:06: [irq 12]
[ 0.193835] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.193995] pnp 00:07: [io 0x002e-0x002f]
[ 0.194006] pnp 00:07: [io 0x004e-0x004f]
[ 0.194017] pnp 00:07: [io 0x00b0-0x00b1]
[ 0.194025] pnp 00:07: [io 0x0092]
[ 0.194033] pnp 00:07: [io 0x0200-0x020f]
[ 0.194039] pnp 00:07: [io 0x0c14]
[ 0.194044] pnp 00:07: [io 0x0c50-0x0c52]
[ 0.194049] pnp 00:07: [io 0x0c6c]
[ 0.194054] pnp 00:07: [io 0x0c6f]
[ 0.194060] pnp 00:07: [io 0x0cd6-0x0cd7]
[ 0.194065] pnp 00:07: [io 0x1080]
[ 0.194070] pnp 00:07: [io 0x8000-0x803f]
[ 0.194075] pnp 00:07: [io 0x8800]
[ 0.194081] pnp 00:07: [io 0xfe00]
[ 0.194086] pnp 00:07: [io 0xfe10-0xfe11]
[ 0.194092] pnp 00:07: [mem 0x000e4000-0x000fffff]
[ 0.194097] pnp 00:07: [mem 0x00100000-0x1bffffff]
[ 0.194103] pnp 00:07: [mem 0xe8000000-0xe8000fff]
[ 0.194109] pnp 00:07: [mem 0xfff80000-0xffffffff]
[ 0.194262] system 00:07: [io 0x0200-0x020f] has been reserved
[ 0.194270] system 00:07: [io 0x0c14] has been reserved
[ 0.194277] system 00:07: [io 0x0c50-0x0c52] has been reserved
[ 0.194283] system 00:07: [io 0x0c6c] has been reserved
[ 0.194290] system 00:07: [io 0x0c6f] has been reserved
[ 0.194296] system 00:07: [io 0x0cd6-0x0cd7] has been reserved
[ 0.194303] system 00:07: [io 0x1080] has been reserved
[ 0.194310] system 00:07: [io 0x8000-0x803f] has been reserved
[ 0.194322] system 00:07: [io 0x8800] has been reserved
[ 0.194328] system 00:07: [io 0xfe00] has been reserved
[ 0.194335] system 00:07: [io 0xfe10-0xfe11] has been reserved
[ 0.194343] system 00:07: [mem 0x000e4000-0x000fffff] could not be reserved
[ 0.194350] system 00:07: [mem 0x00100000-0x1bffffff] could not be reserved
[ 0.194356] system 00:07: [mem 0xe8000000-0xe8000fff] has been reserved
[ 0.194363] system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.194372] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.194622] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (disabled)
[ 0.199364] pnp 00:09: [io 0x0378-0x037f]
[ 0.199364] pnp 00:09: [io 0x0778-0x077b]
[ 0.199364] pnp 00:09: [irq 7]
[ 0.199364] pnp 00:09: [dma 1]
[ 0.199364] pnp 00:09: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.220108] pnp: PnP ACPI: found 10 devices
[ 0.220118] ACPI: ACPI bus type pnp unregistered
[ 0.220127] PnPBIOS: Disabled by ACPI PNP
[ 0.258655] Switching to clocksource acpi_pm
[ 0.260016] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.260016] pci 0000:02:04.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.260016] pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-04] add_size 8000000
[ 0.260016] pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 8000000
[ 0.260016] pci 0000:00:14.4: BAR 15: assigned [mem 0x2c000000-0x33ffffff pref]
[ 0.260016] pci 0000:00:14.0: BAR 1: assigned [mem 0x34000000-0x340003ff]
[ 0.260016] pci 0000:01:05.0: BAR 6: assigned [mem 0xe8120000-0xe813ffff pref]
[ 0.260016] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.260016] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.260016] pci 0000:00:01.0: bridge window [mem 0xe8100000-0xe81fffff]
[ 0.260016] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref]
[ 0.260016] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.260016] pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.260016] pci 0000:02:04.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.260016] pci 0000:02:04.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.260016] pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.260016] pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.260016] pci 0000:02:04.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.260016] pci 0000:02:04.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.260016] pci 0000:02:04.0: BAR 0: assigned [mem 0x38000000-0x38000fff]
[ 0.260016] pci 0000:02:04.0: BAR 15: assigned [mem 0x2c000000-0x2fffffff pref]
[ 0.260016] pci 0000:02:04.0: BAR 16: assigned [mem 0x3c000000-0x3fffffff]
[ 0.260016] pci 0000:02:04.1: BAR 0: assigned [mem 0x40000000-0x40000fff]
[ 0.260016] pci 0000:02:04.1: BAR 15: assigned [mem 0x30000000-0x33ffffff pref]
[ 0.260016] pci 0000:02:04.1: BAR 16: assigned [mem 0x44000000-0x47ffffff]
[ 0.260016] pci 0000:02:04.0: BAR 13: assigned [io 0xa800-0xa8ff]
[ 0.260016] pci 0000:02:04.0: BAR 14: assigned [io 0xac00-0xacff]
[ 0.260016] pci 0000:02:04.1: BAR 13: assigned [io 0x1400-0x14ff]
[ 0.260016] pci 0000:02:04.1: BAR 14: assigned [io 0x1800-0x18ff]
[ 0.260016] pci 0000:02:04.0: CardBus bridge to [bus 03-03]
[ 0.260016] pci 0000:02:04.0: bridge window [io 0xa800-0xa8ff]
[ 0.260016] pci 0000:02:04.0: bridge window [io 0xac00-0xacff]
[ 0.260016] pci 0000:02:04.0: bridge window [mem 0x2c000000-0x2fffffff pref]
[ 0.260016] pci 0000:02:04.0: bridge window [mem 0x3c000000-0x3fffffff]
[ 0.260016] pci 0000:02:04.1: CardBus bridge to [bus 04-07]
[ 0.260016] pci 0000:02:04.1: bridge window [io 0x1400-0x14ff]
[ 0.260016] pci 0000:02:04.1: bridge window [io 0x1800-0x18ff]
[ 0.260016] pci 0000:02:04.1: bridge window [mem 0x30000000-0x33ffffff pref]
[ 0.260016] pci 0000:02:04.1: bridge window [mem 0x44000000-0x47ffffff]
[ 0.260016] pci 0000:00:14.4: PCI bridge to [bus 02-04]
[ 0.260016] pci 0000:00:14.4: bridge window [io 0xa000-0xafff]
[ 0.260016] pci 0000:00:14.4: bridge window [mem 0xe8200000-0xe82fffff]
[ 0.260016] pci 0000:00:14.4: bridge window [mem 0x2c000000-0x33ffffff pref]
[ 0.260016] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.260016] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.260016] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.260016] pci_bus 0000:01: resource 1 [mem 0xe8100000-0xe81fffff]
[ 0.260016] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref]
[ 0.260016] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.260016] pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe82fffff]
[ 0.260016] pci_bus 0000:02: resource 2 [mem 0x2c000000-0x33ffffff pref]
[ 0.260016] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.260016] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.260016] pci_bus 0000:03: resource 0 [io 0xa800-0xa8ff]
[ 0.260016] pci_bus 0000:03: resource 1 [io 0xac00-0xacff]
[ 0.260016] pci_bus 0000:03: resource 2 [mem 0x2c000000-0x2fffffff pref]
[ 0.260016] pci_bus 0000:03: resource 3 [mem 0x3c000000-0x3fffffff]
[ 0.260016] pci_bus 0000:04: resource 0 [io 0x1400-0x14ff]
[ 0.260016] pci_bus 0000:04: resource 1 [io 0x1800-0x18ff]
[ 0.260016] pci_bus 0000:04: resource 2 [mem 0x30000000-0x33ffffff pref]
[ 0.260016] pci_bus 0000:04: resource 3 [mem 0x44000000-0x47ffffff]
[ 0.260016] NET: Registered protocol family 2
[ 0.260016] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.260016] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.261422] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.261636] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.261643] TCP: reno registered
[ 0.261650] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.261663] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.261768] NET: Registered protocol family 1
[ 0.372130] pci 0000:01:05.0: Boot video device
[ 0.484223] PCI: CLS 32 bytes, default 64
[ 0.485391] audit: initializing netlink socket (disabled)
[ 0.485454] type=2000 audit(1363464820.480:1): initialized
[ 0.520106] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.523672] VFS: Disk quotas dquot_6.5.2
[ 0.523807] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.525109] fuse init (API version 7.19)
[ 0.525319] msgmni has been set to 834
[ 0.526080] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.526139] io scheduler noop registered
[ 0.526144] io scheduler deadline registered (default)
[ 0.526165] io scheduler cfq registered
[ 0.526483] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.526527] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.531792] ACPI: AC Adapter [ACAD] (on-line)
[ 0.531944] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.531985] ACPI: Lid Switch [LID]
[ 0.532102] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.532112] ACPI: Power Button [PWRB]
[ 0.532254] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.532263] ACPI: Power Button [PWRF]
[ 0.532363] Marking TSC unstable due to TSC halts in idle
[ 0.532378] ACPI: acpi_idle registered with cpuidle
[ 0.557213] Freeing initrd memory: 14732k freed
[ 0.596062] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.596082] ACPI: Thermal Zone [THRM] (41 C)
[ 0.596133] ACPI: Battery Slot [BAT1] (battery present)
[ 0.596183] GHES: HEST is not enabled!
[ 0.596351] isapnp: Scanning for PnP cards...
[ 0.600173] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.602486] Linux agpgart interface v0.103
[ 0.605376] brd: module loaded
[ 0.606769] loop: module loaded
[ 0.607762] Fixed MDIO Bus: probed
[ 0.607856] tun: Universal TUN/TAP device driver, 1.6
[ 0.607859] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.607935] PPP generic driver version 2.4.2
[ 0.608035] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.608108] ehci_hcd 0000:02:07.2: EHCI Host Controller
[ 0.608122] ehci_hcd 0000:02:07.2: new USB bus registered, assigned bus number 1
[ 0.632060] ehci_hcd 0000:02:07.2: irq 19, io mem 0xe8206c00
[ 0.644023] ehci_hcd 0000:02:07.2: USB 2.0 started, EHCI 1.00
[ 0.644067] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.644073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.644078] usb usb1: Product: EHCI Host Controller
[ 0.644083] usb usb1: Manufacturer: Linux 3.5.0-25-generic ehci_hcd
[ 0.644087] usb usb1: SerialNumber: 0000:02:07.2
[ 0.644284] hub 1-0:1.0: USB hub found
[ 0.644294] hub 1-0:1.0: 5 ports detected
[ 0.644434] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.644483] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.644495] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 0.644516] ohci_hcd 0000:00:13.0: irq 19, io mem 0xe8001000
[ 0.704098] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.704105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.704110] usb usb2: Product: OHCI Host Controller
[ 0.704115] usb usb2: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
[ 0.704120] usb usb2: SerialNumber: 0000:00:13.0
[ 0.704295] hub 2-0:1.0: USB hub found
[ 0.704306] hub 2-0:1.0: 3 ports detected
[ 0.704432] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.704443] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 0.704470] ohci_hcd 0000:00:13.1: irq 19, io mem 0xe8002000
[ 0.764053] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.764059] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.764064] usb usb3: Product: OHCI Host Controller
[ 0.764068] usb usb3: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
[ 0.764073] usb usb3: SerialNumber: 0000:00:13.1
[ 0.764253] hub 3-0:1.0: USB hub found
[ 0.764263] hub 3-0:1.0: 3 ports detected
[ 0.764395] ohci_hcd 0000:02:07.0: OHCI Host Controller
[ 0.764407] ohci_hcd 0000:02:07.0: new USB bus registered, assigned bus number 4
[ 0.764443] ohci_hcd 0000:02:07.0: irq 16, io mem 0xe8204000
[ 0.788136] ACPI: Battery Slot [BAT1] (battery present)
[ 0.849837] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.849843] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.849848] usb usb4: Product: OHCI Host Controller
[ 0.849852] usb usb4: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
[ 0.849857] usb usb4: SerialNumber: 0000:02:07.0
[ 0.850031] hub 4-0:1.0: USB hub found
[ 0.850041] hub 4-0:1.0: 3 ports detected
[ 0.850181] ohci_hcd 0000:02:07.1: OHCI Host Controller
[ 0.850193] ohci_hcd 0000:02:07.1: new USB bus registered, assigned bus number 5
[ 0.850226] ohci_hcd 0000:02:07.1: irq 18, io mem 0xe8205000
[ 0.933971] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.933977] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.933982] usb usb5: Product: OHCI Host Controller
[ 0.933986] usb usb5: Manufacturer: Linux 3.5.0-25-generic ohci_hcd
[ 0.933991] usb usb5: SerialNumber: 0000:02:07.1
[ 0.934166] hub 5-0:1.0: USB hub found
[ 0.934176] hub 5-0:1.0: 2 ports detected
[ 0.934304] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.934446] usbcore: registered new interface driver libusual
[ 0.934530] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.944348] i8042: Detected active multiplexing controller, rev 1.1
[ 0.949355] isapnp: No Plug & Play device found
[ 0.949459] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.949468] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.949515] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.949553] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.949590] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.949823] mousedev: PS/2 mouse device common for all mice
[ 0.950112] rtc_cmos 00:03: RTC can wake from S4
[ 0.950239] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.950259] rtc0: alarms up to one day, 242 bytes nvram
[ 0.950343] device-mapper: uevent: version 1.0.3
[ 0.950455] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.950507] EISA: Probing bus 0 at eisa.0
[ 0.950516] Cannot allocate resource for EISA slot 1
[ 0.950540] Cannot allocate resource for EISA slot 8
[ 0.950542] EISA: Detected 0 cards.
[ 0.950592] cpuidle: using governor ladder
[ 0.950648] cpuidle: using governor menu
[ 0.950652] EFI Variables Facility v0.08 2004-May-17
[ 0.951030] ashmem: initialized
[ 0.951238] TCP: cubic registered
[ 0.951407] NET: Registered protocol family 10
[ 0.951686] NET: Registered protocol family 17
[ 0.951706] Key type dns_resolver registered
[ 0.951810] Using IPI No-Shortcut mode
[ 0.951993] PM: Hibernation image not present or could not be loaded.
[ 0.952037] registered taskstats version 1
[ 0.955857] Key type trusted registered
[ 0.959435] Key type encrypted registered
[ 0.960130] hub 1-0:1.0: unable to enumerate USB device on port 2
[ 0.963450] Magic number: 5:473:245
[ 0.963583] rtc_cmos 00:03: setting system clock to 2013-03-16 20:13:42 UTC (1363464822)
[ 0.963695] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.963699] EDD information not available.
[ 0.963929] Freeing unused kernel memory: 756k freed
[ 0.965013] Write protecting the kernel text: 5968k
[ 0.965049] Write protecting the kernel read-only data: 2428k
[ 0.974481] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.999805] udevd[87]: starting version 175
[ 1.134613] scsi0 : pata_atiixp
[ 1.135058] scsi1 : pata_atiixp
[ 1.136972] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8060 irq 14
[ 1.136982] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8068 irq 15
[ 1.162546] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.162608] 8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.300690] ata2.00: ATAPI: HL-DT-ST DVD-RW GWA-4080N, 0C12, max MWDMA2
[ 1.301751] ata1.00: ATA-6: ST94019A, 3.09, max UDMA/100
[ 1.301760] ata1.00: 78140160 sectors, multi 16: LBA48
[ 1.308046] usb 5-1: new full-speed USB device number 2 using ohci_hcd
[ 1.316461] ata2.00: configured for MWDMA2
[ 1.318408] ata1.00: configured for UDMA/100
[ 1.318631] scsi 0:0:0:0: Direct-Access ATA ST94019A 3.09 PQ: 0 ANSI: 5
[ 1.318927] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.319057] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.319093] sd 0:0:0:0: [sda] Write Protect is off
[ 1.319101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.319183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.529179] usb 5-1: New USB device found, idVendor=046d, idProduct=c52f
[ 1.529186] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.529190] usb 5-1: Product: USB Receiver
[ 1.529194] usb 5-1: Manufacturer: Logitech
[ 1.553262] usbcore: registered new interface driver usbhid
[ 1.553271] usbhid: USB HID core driver
[ 1.684805] sda: sda1 sda2 < sda5 >
[ 1.685541] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.689439] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4080N 0C12 PQ: 0 ANSI: 5
[ 1.694607] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.694612] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.694854] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.695103] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.697181] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.698242] 8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0x0001a000, 00:0f:b0:41:ce:83, IRQ 19
[ 1.709358] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.4/0000:02:07.1/usb5/5-1/5-1:1.0/input/input4
[ 1.713487] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:02:07.1-1/input0
[ 1.720358] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.4/0000:02:07.1/usb5/5-1/5-1:1.1/input/input5
[ 1.720865] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:02:07.1-1/input1
[ 1.752105] firewire_ohci 0000:02:00.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.252205] firewire_core 0000:02:00.0: created device fw0: GUID 4b3f0200d71e4058, S400
[ 2.542826] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.240110] floppy0: no floppy controllers found
[ 18.005029] Adding 456700k swap on /dev/sda5. Priority:-1 extents:1 across:456700k
[ 18.024359] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.067868] udevd[343]: starting version 175
[ 18.138666] lp: driver loaded but no devices found
[ 18.267754] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 18.267939] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input6
[ 18.381911] parport_pc 00:09: reported by Plug and Play ACPI
[ 18.381954] parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
[ 18.419795] agpgart-ati 0000:00:00.0: Ati IGP9100/M chipset
[ 18.419853] reserve_ram_pages_type failed [mem 0x17fdf000-0x17fdffff], track 0x10, req 0x10
[ 18.430959] wmi: Mapper loaded
[ 18.431622] reserve_ram_pages_type failed [mem 0x17fb4000-0x17fb4fff], track 0x10, req 0x10
[ 18.432101] reserve_ram_pages_type failed [mem 0x17f6d000-0x17f6dfff], track 0x10, req 0x10
[ 18.432499] reserve_ram_pages_type failed [mem 0x181fa000-0x181fafff], track 0x10, req 0x10
[ 18.432910] reserve_ram_pages_type failed [mem 0x17f6f000-0x17f6ffff], track 0x10, req 0x10
[ 18.433461] reserve_ram_pages_type failed [mem 0x17f9a000-0x17f9afff], track 0x10, req 0x10
[ 18.433891] reserve_ram_pages_type failed [mem 0x17f6c000-0x17f6cfff], track 0x10, req 0x10
[ 18.434386] reserve_ram_pages_type failed [mem 0x17f99000-0x17f99fff], track 0x10, req 0x10
[ 18.434882] reserve_ram_pages_type failed [mem 0x17f98000-0x17f98fff], track 0x10, req 0x10
[ 18.436001] agpgart-ati 0000:00:00.0: AGP aperture is 32M @ 0xea000000
[ 18.436303] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.442324] ACPI Warning: 0x00008040-0x00008047 SystemIO conflicts with Region \_SB_.PCI0.LPC0.PMIO 1 (20120320/utaddress-251)
[ 18.442342] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.455454] [drm] Initialized drm 1.1.0 20060810
[ 18.477525] lp0: using parport0 (interrupt-driven).
[ 18.481222] [drm] radeon defaulting to kernel modesetting.
[ 18.481233] [drm] radeon kernel modesetting enabled.
[ 18.484771] [drm] initializing kernel modesetting (RS300 0x1002:0x5835 0x103C:0x006B).
[ 18.484837] [drm] register mmio base: 0xE8100000
[ 18.484842] [drm] register mmio size: 65536
[ 18.485083] agpgart-ati 0000:00:00.0: AGP 3.0 bridge
[ 18.485112] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
[ 18.485146] radeon 0000:01:05.0: putting AGP V3 device into 8x mode
[ 18.485221] radeon 0000:01:05.0: GTT: 32M 0xEA000000 - 0xEBFFFFFF
[ 18.485235] radeon 0000:01:05.0: VRAM: 64M 0x000000001C000000 - 0x000000001FFFFFFF (64M used)
[ 18.485254] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 18.485258] [drm] Driver supports precise vblank timestamp query.
[ 18.485304] [drm] radeon: irq initialized.
[ 18.486106] [drm] Detected VRAM RAM=64M, BAR=128M
[ 18.486116] [drm] RAM width 64bits DDR
[ 18.488592] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 18.490322] [TTM] Zone kernel: Available graphics memory: 221420 kiB
[ 18.490330] [TTM] Initializing pool allocator
[ 18.490342] [TTM] Initializing DMA pool allocator
[ 18.490410] [drm] radeon: 64M of VRAM memory ready
[ 18.490416] [drm] radeon: 32M of GTT memory ready.
[ 18.493179] radeon 0000:01:05.0: WB disabled
[ 18.493197] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000ea000000 and cpu addr 0xdc7b4000
[ 18.493467] [drm] Loading R200 Microcode
[ 18.603891] yenta_cardbus 0000:02:04.0: CardBus bridge found [103c:006b]
[ 18.603922] yenta_cardbus 0000:02:04.0: Enabling burst memory read transactions
[ 18.603931] yenta_cardbus 0000:02:04.0: Using CSCINT to route CSC interrupts to PCI
[ 18.603937] yenta_cardbus 0000:02:04.0: Routing CardBus interrupts to PCI
[ 18.603947] yenta_cardbus 0000:02:04.0: TI: mfunc 0x01111d22, devctl 0x64
[ 18.672681] type=1400 audit(1363457640.205:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=514 comm="apparmor_parser"
[ 18.673725] type=1400 audit(1363457640.205:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=514 comm="apparmor_parser"
[ 18.674278] type=1400 audit(1363457640.205:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=514 comm="apparmor_parser"
[ 18.686565] type=1400 audit(1363457640.217:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=523 comm="apparmor_parser"
[ 18.834342] yenta_cardbus 0000:02:04.0: ISA IRQ mask 0x0c18, PCI irq 17
[ 18.834357] yenta_cardbus 0000:02:04.0: Socket status: 30000086
[ 18.841014] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 18.841033] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa000-0xafff:
[ 18.842014] excluding 0xa000-0xa0ff 0xa400-0xa47f 0xa800-0xa8ff 0xac00-0xacff
[ 18.848995] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
[ 18.849010] pcmcia_socket pcmcia_socket0: cs: memory probe 0xe8200000-0xe82fffff:
[ 18.849020] excluding 0xe8200000-0xe820ffff
[ 18.849054] yenta_cardbus 0000:02:04.0: pcmcia: parent PCI bridge window: [mem 0x2c000000-0x33ffffff pref]
[ 18.849061] pcmcia_socket pcmcia_socket0: cs: memory probe 0x2c000000-0x33ffffff:
[ 18.849093] excluding 0x2c000000-0x33ffffff
[ 18.872391] yenta_cardbus 0000:02:04.1: CardBus bridge found [103c:006b]
[ 18.872427] yenta_cardbus 0000:02:04.1: Using CSCINT to route CSC interrupts to PCI
[ 18.872434] yenta_cardbus 0000:02:04.1: Routing CardBus interrupts to PCI
[ 18.872443] yenta_cardbus 0000:02:04.1: TI: mfunc 0x01111d22, devctl 0x64
[ 18.883113] microcode: CPU0 sig=0xf34, pf=0x4, revision=0xe
[ 18.979793] Bluetooth: Core ver 2.16
[ 18.979859] NET: Registered protocol family 31
[ 18.979867] Bluetooth: HCI device and connection manager initialized
[ 18.979875] Bluetooth: HCI socket layer initialized
[ 18.979881] Bluetooth: L2CAP socket layer initialized
[ 18.979897] Bluetooth: SCO socket layer initialized
[ 19.012181] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.012191] Bluetooth: BNEP filters: protocol multicast
[ 19.017666] Bluetooth: RFCOMM TTY layer initialized
[ 19.017687] Bluetooth: RFCOMM socket layer initialized
[ 19.017692] Bluetooth: RFCOMM ver 1.11
[ 19.052326] ppdev: user-space parallel port driver
[ 19.108641] yenta_cardbus 0000:02:04.1: ISA IRQ mask 0x0c18, PCI irq 16
[ 19.108660] yenta_cardbus 0000:02:04.1: Socket status: 30000006
[ 19.108670] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[ 19.108690] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [io 0xa000-0xafff]
[ 19.108698] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa000-0xafff:
[ 19.125255] type=1400 audit(1363457640.657:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=633 comm="apparmor_parser"
[ 19.109723] excluding 0xa000-0xa0ff 0xa400-0xa47f 0xa800-0xa8ff 0xac00-0xacff
[ 19.129235] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0xe8200000-0xe82fffff]
[ 19.129245] pcmcia_socket pcmcia_socket1: cs: memory probe 0xe8200000-0xe82fffff:
[ 19.129252] excluding 0xe8200000-0xe820ffff
[ 19.129279] yenta_cardbus 0000:02:04.1: pcmcia: parent PCI bridge window: [mem 0x2c000000-0x33ffffff pref]
[ 19.129286] type=1400 audit(1363457640.661:7): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=633 comm="apparmor_parser"
[ 19.129293] pcmcia_socket pcmcia_socket1: cs: memory probe 0x2c000000-0x33ffffff:
[ 19.129317] excluding 0x2c000000-0x33ffffff
[ 19.393278] init: failsafe main process (651) killed by TERM signal
[ 19.399152] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input7
[ 19.423617] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input8
[ 19.650699] type=1400 audit(1363457641.181:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=761 comm="apparmor_parser"
[ 19.657060] type=1400 audit(1363457641.189:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=760 comm="apparmor_parser"
[ 19.657897] type=1400 audit(1363457641.189:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper//chromium_browser" pid=760 comm="apparmor_parser"
[ 19.659677] type=1400 audit(1363457641.189:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
[ 19.749865] 8139too 0000:02:03.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 19.836939] [drm] radeon: ring at 0x00000000EA001000
[ 19.836988] [drm] ring test succeeded in 0 usecs
[ 19.837579] [drm] ib test succeeded in 0 usecs
[ 19.838030] [drm] Panel ID String: LGP
[ 19.838035] [drm] Panel Size 1024x768
[ 19.849109] [drm] radeon legacy LVDS backlight initialized
[ 19.858173] [drm] Radeon Display Connectors
[ 19.858183] [drm] Connector 0:
[ 19.858188] [drm] VGA-1
[ 19.858194] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 19.858197] [drm] Encoders:
[ 19.858201] [drm] CRT1: INTERNAL_DAC2
[ 19.858206] [drm] Connector 1:
[ 19.858210] [drm] LVDS-1
[ 19.858213] [drm] Encoders:
[ 19.858217] [drm] LCD1: INTERNAL_LVDS
[ 19.858221] [drm] Connector 2:
[ 19.858226] [drm] SVIDEO-1
[ 19.858229] [drm] Encoders:
[ 19.858232] [drm] TV1: INTERNAL_DAC2
[ 19.900631] microcode: CPU1 sig=0xf34, pf=0x4, revision=0xe
[ 19.935681] [drm] fb mappable at 0xF0040000
[ 19.935693] [drm] vram apper at 0xF0000000
[ 19.935698] [drm] size 3145728
[ 19.935703] [drm] fb depth is 24
[ 19.935707] [drm] pitch is 4096
[ 19.936787] fbcon: radeondrmfb (fb0) is primary device
[ 19.937032] Console: switching to colour frame buffer device 128x48
[ 19.937087] fb0: radeondrmfb frame buffer device
[ 19.937092] drm: registered panic notifier
[ 19.937113] [drm] Initialized radeon 2.18.0 20080528 for 0000:01:05.0 on minor 0
[ 20.183860] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 21.000858] init: plymouth-stop pre-start process (1034) terminated with status 1
[ 21.408112] floppy0: no floppy controllers found
[ 807.793803] PM: Syncing filesystems ... done.
[ 807.796097] PM: Preparing system for mem sleep
[ 808.378588] Freezing user space processes ... (elapsed 0.02 seconds) done.
[ 808.408123] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 808.424105] PM: Entering mem sleep
[ 808.424130] Suspending console(s) (use no_console_suspend to debug)
[ 808.424761] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 808.471890] parport_pc 00:09: disabled
[ 808.475133] i8042 aux 00:06: wake-up capability disabled by ACPI
[ 808.479157] i8042 kbd 00:05: wake-up capability enabled by ACPI
[ 808.479478] ACPI handle has no context!
[ 808.613162] sd 0:0:0:0: [sda] Stopping disk
[ 810.692228] PM: suspend of drv:sd dev:0:0:0:0 complete after 2267.473 msecs
[ 810.692249] PM: suspend of drv:scsi dev:target0:0:0 complete after 2267.343 msecs
[ 810.692269] PM: suspend of drv:scsi dev:host0 complete after 2267.262 msecs
[ 810.692334] PM: suspend of drv: dev:ata1 complete after 2267.249 msecs
[ 810.692375] PM: suspend of drv:pata_atiixp dev:0000:00:14.1 complete after 2212.498 msecs
[ 810.692393] PM: suspend of drv: dev:pci0000:00 complete after 2212.325 msecs
[ 810.692410] PM: suspend of devices complete after 2268.038 msecs
[ 810.692414] PM: suspend devices took 2.268 seconds
[ 810.692750] PM: late suspend of devices complete after 0.331 msecs
[ 810.693350] ehci_hcd 0000:02:07.2: wake-up capability enabled by ACPI
[ 810.708077] ohci_hcd 0000:02:07.1: wake-up capability enabled by ACPI
[ 810.724065] ohci_hcd 0000:02:07.0: wake-up capability enabled by ACPI
[ 810.740400] PM: noirq suspend of devices complete after 47.645 msecs
[ 810.740567] ACPI: Preparing to enter system sleep state S3
[ 810.741204] PM: Saving platform NVS memory
[ 810.741274] Disabling non-boot CPUs ...
[ 810.844026] CPU 1 is now offline
[ 810.844674] ACPI: Low-level resume complete
[ 810.844674] PM: Restoring platform NVS memory
[ 810.844674] Enabling non-boot CPUs ...
[ 810.844674] Booting Node 0 Processor 1 APIC 0x1
[ 810.742780] Initializing CPU#1
[ 810.856694] CPU1 is up
[ 810.857775] ACPI: Waking up from system sleep state S3
[ 810.858660] ohci_hcd 0000:02:07.0: wake-up capability disabled by ACPI
[ 810.858714] ohci_hcd 0000:02:07.1: wake-up capability disabled by ACPI
[ 810.858766] ehci_hcd 0000:02:07.2: wake-up capability disabled by ACPI
[ 810.859405] PM: noirq resume of devices complete after 1.447 msecs
[ 810.859638] PM: early resume of devices complete after 0.195 msecs
[ 810.860112] [drm] AGP mode requested: 8
[ 810.860118] agpgart-ati 0000:00:00.0: AGP 3.0 bridge
[ 810.860137] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
[ 810.860165] radeon 0000:01:05.0: putting AGP V3 device into 8x mode
[ 810.860229] radeon 0000:01:05.0: GTT: 32M 0xEA000000 - 0xEBFFFFFF
[ 810.870559] radeon 0000:01:05.0: WB disabled
[ 810.870564] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000ea000000 and cpu addr 0xdc870000
[ 810.870623] [drm] radeon: ring at 0x00000000EA001000
[ 810.870643] [drm] ring test succeeded in 0 usecs
[ 810.870817] [drm] ib test succeeded in 0 usecs
[ 810.916024] usb usb3: root hub lost power or was reset
[ 810.920079] usb usb2: root hub lost power or was reset
[ 810.964055] PM: resume of drv:hub dev:5-0:1.0 complete after 101.264 msecs
[ 810.964067] PM: resume of drv: dev:ep_00 complete after 101.215 msecs
[ 810.964085] PM: resume of drv: dev:ep_81 complete after 101.265 msecs
[ 810.964114] PM: resume of drv:hub dev:4-0:1.0 complete after 101.446 msecs
[ 810.964124] PM: resume of drv: dev:ep_00 complete after 101.398 msecs
[ 810.964131] PM: resume of drv: dev:ep_81 complete after 101.434 msecs
[ 811.014079] PM: resume of drv:usbhid dev:5-1:1.0 complete after 149.225 msecs
[ 811.014085] PM: resume of drv: dev:ep_00 complete after 149.110 msecs
[ 811.014095] PM: resume of drv:usbhid dev:5-1:1.1 complete after 149.185 msecs
[ 811.014107] PM: resume of drv: dev:ep_81 complete after 149.225 msecs
[ 811.014111] PM: resume of drv: dev:ep_82 complete after 149.170 msecs
[ 811.028750] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 811.028754] ata2.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[ 811.044265] ata2.00: configured for MWDMA2
[ 811.065701] i8042 kbd 00:05: wake-up capability disabled by ACPI
[ 811.066319] parport_pc 00:09: activated
[ 811.116078] PM: resume of drv: dev:ep_00 complete after 253.472 msecs
[ 811.116084] PM: resume of drv:hub dev:3-0:1.0 complete after 253.545 msecs
[ 811.116100] PM: resume of drv: dev:ep_00 complete after 253.579 msecs
[ 811.116105] PM: resume of drv:hub dev:2-0:1.0 complete after 253.597 msecs
[ 811.116120] PM: resume of drv: dev:ep_81 complete after 253.582 msecs
[ 811.116124] PM: resume of drv: dev:ep_81 complete after 253.611 msecs
[ 811.155881] PM: resume of drv:scsi dev:host1 complete after 291.201 msecs
[ 811.155904] PM: resume of drv:scsi_host dev:host1 complete after 291.200 msecs
[ 811.155911] PM: resume of drv:scsi dev:target1:0:0 complete after 290.909 msecs
[ 811.155932] PM: resume of drv:sr dev:1:0:0:0 complete after 290.900 msecs
[ 811.155956] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 290.894 msecs
[ 811.468067] firewire_core 0000:02:00.0: rediscovered device fw0
[ 814.444307] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 814.444310] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 814.460426] ata1.00: configured for UDMA/100
[ 814.460473] PM: resume of drv:scsi dev:host0 complete after 3595.862 msecs
[ 814.460493] PM: resume of drv:ata_port dev:ata1 complete after 3363.981 msecs
[ 814.460545] PM: resume of drv:scsi_host dev:host0 complete after 3595.904 msecs
[ 814.460556] PM: resume of drv:scsi dev:target0:0:0 complete after 3595.825 msecs
[ 814.460572] PM: resume of drv:sd dev:0:0:0:0 complete after 3595.811 msecs
[ 814.460579] sd 0:0:0:0: [sda] Starting disk
[ 814.484184] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3619.392 msecs
[ 814.764117] PM: resume of devices complete after 3904.470 msecs
[ 814.764278] PM: resume devices took 3.908 seconds
[ 814.764380] PM: Finishing wakeup.
[ 814.764383] Restarting tasks ... done.
[ 814.876435] video LNXVIDEO:00: Restoring backlight state
[ 815.810072] 8139too 0000:02:03.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 1735.143345] PM: Syncing filesystems ... done.
[ 1735.149072] PM: Preparing system for mem sleep
[ 1735.608156] Freezing user space processes ... (elapsed 0.03 seconds) done.
[ 1735.640133] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 1735.656106] PM: Entering mem sleep
[ 1735.656132] Suspending console(s) (use no_console_suspend to debug)
[ 1735.656728] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 1735.696441] parport_pc 00:09: disabled
[ 1735.701813] i8042 aux 00:06: wake-up capability disabled by ACPI
[ 1735.705578] i8042 kbd 00:05: wake-up capability enabled by ACPI
[ 1735.705900] ACPI handle has no context!
[ 1735.836814] sd 0:0:0:0: [sda] Stopping disk
[ 1737.920950] PM: suspend of drv:sd dev:0:0:0:0 complete after 2264.228 msecs
[ 1737.920972] PM: suspend of drv:scsi dev:target0:0:0 complete after 2263.983 msecs
[ 1737.920992] PM: suspend of drv:scsi dev:host0 complete after 2263.910 msecs
[ 1737.921061] PM: suspend of drv: dev:ata1 complete after 2263.905 msecs
[ 1737.921102] PM: suspend of drv:pata_atiixp dev:0000:00:14.1 complete after 2208.754 msecs
[ 1737.921121] PM: suspend of drv: dev:pci0000:00 complete after 2208.615 msecs
[ 1737.921138] PM: suspend of devices complete after 2264.767 msecs
[ 1737.921142] PM: suspend devices took 2.264 seconds
[ 1737.921481] PM: late suspend of devices complete after 0.334 msecs
[ 1737.922080] ehci_hcd 0000:02:07.2: wake-up capability enabled by ACPI
[ 1737.936093] ohci_hcd 0000:02:07.1: wake-up capability enabled by ACPI
[ 1737.952074] ohci_hcd 0000:02:07.0: wake-up capability enabled by ACPI
[ 1737.968406] PM: noirq suspend of devices complete after 46.920 msecs
[ 1737.968574] ACPI: Preparing to enter system sleep state S3
[ 1737.969176] PM: Saving platform NVS memory
[ 1737.969238] Disabling non-boot CPUs ...
[ 1738.072048] CPU 1 is now offline
[ 1738.072646] ACPI: Low-level resume complete
[ 1738.072646] PM: Restoring platform NVS memory
[ 1738.072646] Enabling non-boot CPUs ...
[ 1738.072646] Booting Node 0 Processor 1 APIC 0x1
[ 1737.970711] Initializing CPU#1
[ 1738.084632] CPU1 is up
[ 1738.085704] ACPI: Waking up from system sleep state S3
[ 1738.086585] ohci_hcd 0000:02:07.0: wake-up capability disabled by ACPI
[ 1738.086638] ohci_hcd 0000:02:07.1: wake-up capability disabled by ACPI
[ 1738.086690] ehci_hcd 0000:02:07.2: wake-up capability disabled by ACPI
[ 1738.087325] PM: noirq resume of devices complete after 1.439 msecs
[ 1738.087552] PM: early resume of devices complete after 0.188 msecs
[ 1738.087943] [drm] AGP mode requested: 8
[ 1738.087948] agpgart-ati 0000:00:00.0: AGP 3.0 bridge
[ 1738.087967] agpgart-ati 0000:00:00.0: putting AGP V3 device into 8x mode
[ 1738.087995] radeon 0000:01:05.0: putting AGP V3 device into 8x mode
[ 1738.088142] radeon 0000:01:05.0: GTT: 32M 0xEA000000 - 0xEBFFFFFF
[ 1738.098473] radeon 0000:01:05.0: WB disabled
[ 1738.098478] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000ea000000 and cpu addr 0xdc872000
[ 1738.098542] [drm] radeon: ring at 0x00000000EA001000
[ 1738.098562] [drm] ring test succeeded in 0 usecs
[ 1738.098729] [drm] ib test succeeded in 0 usecs
[ 1738.144021] usb usb2: root hub lost power or was reset
[ 1738.148023] usb usb3: root hub lost power or was reset
[ 1738.192073] PM: resume of drv:hub dev:5-0:1.0 complete after 101.397 msecs
[ 1738.192085] PM: resume of drv: dev:ep_00 complete after 101.353 msecs
[ 1738.192092] PM: resume of drv: dev:ep_81 complete after 101.390 msecs
[ 1738.192120] PM: resume of drv: dev:ep_00 complete after 101.509 msecs
[ 1738.192135] PM: resume of drv:hub dev:4-0:1.0 complete after 101.582 msecs
[ 1738.192152] PM: resume of drv: dev:ep_81 complete after 101.571 msecs
[ 1738.242089] PM: resume of drv:usbhid dev:5-1:1.0 complete after 149.387 msecs
[ 1738.242094] PM: resume of drv: dev:ep_00 complete after 149.269 msecs
[ 1738.242105] PM: resume of drv:usbhid dev:5-1:1.1 complete after 149.344 msecs
[ 1738.242116] PM: resume of drv: dev:ep_81 complete after 149.385 msecs
[ 1738.242121] PM: resume of drv: dev:ep_82 complete after 149.328 msecs
[ 1738.256747] ata2.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1738.256750] ata2.00: ACPI cmd ef/03:22:00:00:00:a0 (SET FEATURES) filtered out
[ 1738.272265] ata2.00: configured for MWDMA2
[ 1738.295786] i8042 kbd 00:05: wake-up capability disabled by ACPI
[ 1738.296432] parport_pc 00:09: activated
[ 1738.344069] PM: resume of drv: dev:ep_00 complete after 253.657 msecs
[ 1738.344074] PM: resume of drv:hub dev:2-0:1.0 complete after 253.671 msecs
[ 1738.344107] PM: resume of drv: dev:ep_00 complete after 253.614 msecs
[ 1738.344113] PM: resume of drv:hub dev:3-0:1.0 complete after 253.693 msecs
[ 1738.344127] PM: resume of drv: dev:ep_81 complete after 253.724 msecs
[ 1738.344132] PM: resume of drv: dev:ep_81 complete after 253.707 msecs
[ 1738.383484] PM: resume of drv:scsi dev:host1 complete after 290.964 msecs
[ 1738.383507] PM: resume of drv:scsi_host dev:host1 complete after 290.963 msecs
[ 1738.383536] PM: resume of drv:scsi dev:target1:0:0 complete after 290.681 msecs
[ 1738.383557] PM: resume of drv:sr dev:1:0:0:0 complete after 290.670 msecs
[ 1738.383581] PM: resume of drv:scsi_device dev:1:0:0:0 complete after 290.664 msecs
[ 1738.648073] firewire_core 0000:02:00.0: rediscovered device fw0
[ 1741.560309] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
[ 1741.560312] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
[ 1741.576397] ata1.00: configured for UDMA/100
[ 1741.576448] PM: resume of drv:ata_port dev:ata1 complete after 3249.984 msecs
[ 1741.576452] PM: resume of drv:scsi dev:host0 complete after 3483.999 msecs
[ 1741.576468] PM: resume of drv:scsi_host dev:host0 complete after 3483.986 msecs
[ 1741.576476] PM: resume of drv:scsi dev:target0:0:0 complete after 3483.903 msecs
[ 1741.576489] PM: resume of drv:sd dev:0:0:0:0 complete after 3483.885 msecs
[ 1741.576496] sd 0:0:0:0: [sda] Starting disk
[ 1741.596641] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 3504.006 msecs
[ 1741.876120] PM: resume of devices complete after 3788.558 msecs
[ 1741.876280] PM: resume devices took 3.792 seconds
[ 1741.876378] PM: Finishing wakeup.
[ 1741.876381] Restarting tasks ... done.
[ 1741.988394] video LNXVIDEO:00: Restoring backlight state
[ 1742.507439] 8139too 0000:02:03.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1


Μάλλον σε βλέπω για NdisWrapper.

Σωστος ο Learner. Και εγω που κοιταξα, μονο αναφορές σε ndiswrapper βρηκα.
drivers απο XP μαλλον θελει. Δεν μου εχει τυχει να χρησιμοποιησω drivers απο win7.

Μάλλον σε βλέπω για NdisWrapper. Όσο και να «googlαρα» δεν βρήκα κάτι σε native linux.
Οπότε ακολουθείς τον οδηγό εδώ. Πρέπει βέβαια να βρεις τους drivers από WindowsXp (ή και 7 , νομίζω κάνει).

Βασικα εγω οσο και αν εψαξα δεν βρηκα πουθενα τιποτα απολυτως,ουτε για xp ουτε τιποτα.
Μπορω με καποια εντολη να δω το ακριβες μοντελο της καρτας για να ξαναψαξω? Αλλιως θα πρεπει να το ανοιξω..

[the_eye]

Μπορω με καποια εντολη να δω το ακριβες μοντελο της καρτας

Κώδικας: Επιλογή όλων

Network controller [0280]: LSI Corporation Device [11c1:ab34]

Από ότι κατάλαβα πρέπει να βρεις τον οδηγό wlags49_h25_pci
που το λινκ της εταιρία δεν υπάρχει πλέον http://www.agere.com/mobility/wireless_lan_drivers.html γιατί ούτε η εταιρία υπάρχει.

Μπορείς απλά να βάλεις ένα νέο usb wifi stick.

[dim459]

O μόνος agere wlan driver που βρήκα είναι ένας για Acer χωρίς πολλές λεπτομέρειες.
Δες μήπως κατά τύχη είναι ο σωστός
http://www.driversforfree.com
Δεν βάζω το ακριβές link, γιατί δεν το ανοίγει, τσέκαρέ το μέσα από τη σελίδα.
Δες κι εδώ:
http://drivers.softpedia.com/get/NETWORK-CARD/OTHER-NETWORK-CARDS/Agere-Wireless-LAN-driver-782.shtml

[the_eye]

Νομίζω βρήκα κάτι εδώ

http://download.wireless-driver.com/dri ... abg.tar.gz

Αποσυμπίεσε το αρχείο και τρέξε το install με sudo