system program problem detected

...εγκαταστάσεις, αναβαθμίσεις, διαχείριση partitions, boot-loader, κλπ

Συντονιστής: adem1

Κανόνες Δ. Συζήτησης
Στην ενότητα αυτή γράφουμε θέματα/ προβλήματα μόνο για το UBUNTU ή τα παράγωγά του.

Re: system program problem detected

Δημοσίευσηαπό bobptz » 10 Ιούλ 2019, 08:14

Και η επόμενη επανεκκίνηση, πάλι αυξήθηκε:
Κώδικας: Επιλογή όλων
199 UDMA_CRC_Error_Count    0x003e   098   098   000    Old_age   Always       -       1050
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 659
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 10 Ιούλ 2019, 14:30

Κώδικας: Επιλογή όλων
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       2147
12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       1333
177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       6
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   065   054   000    Old_age   Always       -       35
195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x003e   098   098   000    Old_age   Always       -       1063
235 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       -       36
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       4152562826


Να και με το disks utility:
Εικόνα

Στο assessment πάντως το βγάζει OK.
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 659
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό the_eye » 10 Ιούλ 2019, 17:21

Δοκίμασε να αλλάξεις καλώδιο και υποδοχή στην motherboard, μπας και στρώσει.
Δοκίμασε και τον δίσκο σε άλλο pc.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 11 Ιούλ 2019, 00:10

Το θέμα με το UDMA_CRC_Error_Count το έλυσα, αλλά το error message παραμένει το ίδιο.

Έπαιξα λίγο με τα SATA καλώδια, τα φύσιξα κτλ. Μετά από αυτό το UDMA_CRC_Error_Count σταθεροποιήθηκε στο 1079:
Κώδικας: Επιλογή όλων
199 UDMA_CRC_Error_Count    0x003e   098   098   000    Old_age   Always       -       1079


Κώδικας: Επιλογή όλων
$ sudo smartctl -a /dev/sda
[sudo] password for bob:
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.18.0-25-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     Samsung SSD 860 EVO 250GB
Serial Number:    S3YJNB0K518341D
LU WWN Device Id: 5 002538 e403bfdac
Firmware Version: RVT01B6Q
User Capacity:    250.059.350.016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x09fc), ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Jul 11 00:01:25 2019 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)   Offline data collection activity
               was never started.
               Auto Offline Data Collection: Disabled.
Self-test execution status:      ( 249)   Self-test routine in progress...
               90% of test remaining.
Total time to complete Offline
data collection:       (    0) seconds.
Offline data collection
capabilities:           (0x53) SMART execute Offline immediate.
               Auto Offline data collection on/off support.
               Suspend Offline collection upon new
               command.
               No Offline surface scan supported.
               Self-test supported.
               No Conveyance Self-test supported.
               Selective Self-test supported.
SMART capabilities:            (0x0003)   Saves SMART data before entering
               power-saving mode.
               Supports SMART auto save timer.
Error logging capability:        (0x01)   Error logging supported.
               General Purpose Logging supported.
Short self-test routine
recommended polling time:     (   2) minutes.
Extended self-test routine
recommended polling time:     (  85) minutes.
SCT capabilities:           (0x003d)   SCT Status supported.
               SCT Error Recovery Control supported.
               SCT Feature Control supported.
               SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       2150
12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       1339
177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       6
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   052   052   000    Old_age   Always       -       48
195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x003e   098   098   000    Old_age   Always       -       1079
235 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       -       36
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       4156871390

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      1668         -

SMART Selective self-test log data structure revision number 1
SPAN    MIN_LBA    MAX_LBA  CURRENT_TEST_STATUS
    1          0          0  Not_testing
    2          0          0  Not_testing
    3          0          0  Not_testing
    4          0          0  Not_testing
    5          0          0  Not_testing
  256  218439680  218505215  Read_scanning was never started
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Οπότε να υποθέσω ότι ίσως υπήρχε κάποιο πρόβλημα στη σύνδεση του καλωδίου και ο δίσκος SSD δεν έχει πρόβλημα?

Επειδή όμως το error message παραμένει το ίδιο, ξανατρέχω το dmesg :
Κώδικας: Επιλογή όλων
$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
[    0.000000] Linux version 4.18.0-25-generic (buildd@lgw01-amd64-033) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #26~18.04.1-Ubuntu SMP Thu Jun 27 07:28:31 UTC 2019 (Ubuntu 4.18.0-25.26~18.04.1-generic 4.18.20)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-25-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b96abfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b96ac000-0x00000000b96b2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b96b3000-0x00000000ba320fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba321000-0x00000000ba7f7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba7f8000-0x00000000cd43cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd43d000-0x00000000cd4a3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd4a4000-0x00000000cd4ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd4ec000-0x00000000cd620fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd621000-0x00000000cdffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Pro3, BIOS P2.30 03/08/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FE0000000 write-back
[    0.000000]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   3 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   4 base 00CF000000 mask 7FFF000000 uncachable
[    0.000000]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] total RAM covered: 7918M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K    chunk_size: 32M    num_reg: 7     lose cover RAM: 0G
[    0.000000] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd160-0x000fd16f] mapped at [(____ptrval____)]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x96563000, 0x96563fff] PGTABLE
[    0.000000] BRK [0x96564000, 0x96564fff] PGTABLE
[    0.000000] BRK [0x96565000, 0x96565fff] PGTABLE
[    0.000000] BRK [0x96566000, 0x96566fff] PGTABLE
[    0.000000] BRK [0x96567000, 0x96567fff] PGTABLE
[    0.000000] BRK [0x96568000, 0x96568fff] PGTABLE
[    0.000000] BRK [0x96569000, 0x96569fff] PGTABLE
[    0.000000] BRK [0x9656a000, 0x9656afff] PGTABLE
[    0.000000] BRK [0x9656b000, 0x9656bfff] PGTABLE
[    0.000000] BRK [0x9656c000, 0x9656cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x30c01000-0x345f7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000CD5F0088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000CD6006D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000CD5F01A8 01052F (v02 ALASKA A M I    00000230 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000CD620F80 000040
[    0.000000] ACPI: APIC 0x00000000CD6007E8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000CD600860 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000CD6008A8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CD600DE8 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000CD601960 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000CD601B28 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000CD601B68 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000CD601BA0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000CD601F10 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: AAFT 0x00000000CD607A70 00031D (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: UEFI 0x00000000CD607D90 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: DMAR 0x00000000CD607DD8 0000B8 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21fdd3000-0x21fdfdfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b96abfff]
[    0.000000]   node   0: [mem 0x00000000b96b3000-0x00000000ba320fff]
[    0.000000]   node   0: [mem 0x00000000ba7f8000-0x00000000cd43cfff]
[    0.000000]   node   0: [mem 0x00000000cd4a4000-0x00000000cd4ebfff]
[    0.000000]   node   0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.000000] Reserved but unavailable: 12476 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.000000] On node 0 totalpages: 2018628
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 13055 pages used for memmap
[    0.000000]   DMA32 zone: 835496 pages, LIFO batch:31
[    0.000000]   Normal zone: 18424 pages used for memmap
[    0.000000]   Normal zone: 1179136 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at [mem 0xcf200000-0xdf1fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb96ac000-0xb96b2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xba321000-0xba7f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd43d000-0xcd4a3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd4ec000-0xcd620fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcd621000-0xcdffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x99/0x55a with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @(____ptrval____) s151552 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1987064
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.18.0-25-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7793080K/8074512K available (12300K kernel code, 2633K rwdata, 4380K rodata, 2464K init, 2340K bss, 281432K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 40828 entries in 160 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.000000]    Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] vt handoff: transparent VT on vt#1
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180531
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] DMAR: Host address width 39
[    0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.000000] DMAR: RMRR base: 0x000000cdea5000 end: 0x000000cdeb3fff
[    0.000000] DMAR: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[    0.000000] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] tsc: Fast TSC calibration using PIT
[    0.024000] tsc: Detected 3192.621 MHz processor
[    0.024000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e050f5cadc, max_idle_ns: 440795334583 ns
[    0.024000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.24 BogoMIPS (lpj=12770484)
[    0.024000] pid_max: default: 32768 minimum: 301
[    0.024000] Security Framework initialized
[    0.024000] Yama: becoming mindful.
[    0.024000] AppArmor: AppArmor initialized
[    0.024000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.024000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.024000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.024000] mce: CPU supports 9 MCE banks
[    0.024000] CPU0: Thermal monitoring enabled (TM1)
[    0.024000] process: using mwait in idle threads
[    0.024000] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.024000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.024000] Spectre V2 : Mitigation: Full generic retpoline
[    0.024000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.024000] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.024000] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.024000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.024000] MDS: Mitigation: Clear CPU buffers
[    0.024000] Freeing SMP alternatives memory: 36K
[    0.028044] TSC deadline timer enabled
[    0.028046] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.028108] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.028141] ... version:                3
[    0.028141] ... bit width:              48
[    0.028141] ... generic registers:      8
[    0.028142] ... value mask:             0000ffffffffffff
[    0.028142] ... max period:             00007fffffffffff
[    0.028143] ... fixed-purpose events:   3
[    0.028143] ... event mask:             00000007000000ff
[    0.028166] Hierarchical SRCU implementation.
[    0.028886] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.028896] smp: Bringing up secondary CPUs ...
[    0.028946] x86: Booting SMP configuration:
[    0.028947] .... node  #0, CPUs:      #1 #2 #3
[    0.033472] smp: Brought up 1 node, 4 CPUs
[    0.033472] smpboot: Max logical packages: 1
[    0.033472] smpboot: Total of 4 processors activated (25540.96 BogoMIPS)
[    0.036155] devtmpfs: initialized
[    0.036155] x86/mm: Memory block size: 128MB
[    0.036494] PM: Registering ACPI NVS region [mem 0xb96ac000-0xb96b2fff] (28672 bytes)
[    0.036494] PM: Registering ACPI NVS region [mem 0xcd4ec000-0xcd620fff] (1265664 bytes)
[    0.036494] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.036494] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.036494] pinctrl core: initialized pinctrl subsystem
[    0.036494] RTC time: 20:54:16, date: 07/10/19
[    0.036494] NET: Registered protocol family 16
[    0.036494] audit: initializing netlink subsys (disabled)
[    0.036494] audit: type=2000 audit(1562792056.036:1): state=initialized audit_enabled=0 res=1
[    0.036494] cpuidle: using governor ladder
[    0.036494] cpuidle: using governor menu
[    0.036494] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.036494] ACPI: bus type PCI registered
[    0.036494] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.036494] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.036494] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.036494] PCI: Using configuration type 1 for base access
[    0.036494] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.036899] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.036899] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.036899] ACPI: Added _OSI(Module Device)
[    0.036899] ACPI: Added _OSI(Processor Device)
[    0.036899] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.036899] ACPI: Added _OSI(Processor Aggregator Device)
[    0.036899] ACPI: Added _OSI(Linux-Dell-Video)
[    0.036899] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.053103] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.057454] ACPI: Dynamic OEM Table Load:
[    0.057454] ACPI: SSDT 0xFFFF95D896120000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.057454] ACPI: Dynamic OEM Table Load:
[    0.057454] ACPI: SSDT 0xFFFF95D896214800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.057454] ACPI: Dynamic OEM Table Load:
[    0.057454] ACPI: SSDT 0xFFFF95D895C06C00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.057454] ACPI: Interpreter enabled
[    0.057454] ACPI: (supports S0 S3 S4 S5)
[    0.057454] ACPI: Using IOAPIC for interrupt routing
[    0.057454] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.057682] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.058331] ACPI: Power Resource [PG00] (on)
[    0.060296] ACPI: Power Resource [PG01] (on)
[    0.060714] ACPI: Power Resource [PG02] (on)
[    0.076189] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.076194] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.076540] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
[    0.076861] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.076861] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.077312] PCI host bridge to bus 0000:00
[    0.077314] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.077315] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.077316] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.077317] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.077318] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.077319] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.077320] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.077321] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.077322] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.077323] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.077324] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.077330] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.077415] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.077423] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.077428] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.077431] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.077511] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.077518] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
[    0.077618] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.077635] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[    0.077686] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.077760] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.077778] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3e000-0xf7d3e00f 64bit]
[    0.077833] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.077931] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[    0.077947] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[    0.077953] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3c000-0xf7d3cfff]
[    0.077960] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.078010] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.078085] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.078104] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
[    0.078177] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.078254] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.078271] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[    0.078331] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.078405] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.078465] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.078590] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[    0.078651] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.078772] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.078791] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3a000-0xf7d3a3ff]
[    0.078866] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.078945] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.079110] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.079123] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.079129] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.079135] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.079140] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.079146] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.079152] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d39000-0xf7d397ff]
[    0.079182] pci 0000:00:1f.2: PME# supported from D3hot
[    0.079251] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.079266] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d38000-0xf7d380ff 64bit]
[    0.079283] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.079414] acpiphp: Slot [1] registered
[    0.079418] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.079482] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401
[    0.079631] pci 0000:00:1c.6: PCI bridge to [bus 02-03] (subtractive decode)
[    0.079634] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.079636] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.079641] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.079642] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.079643] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.079644] pci 0000:00:1c.6:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.079645] pci 0000:00:1c.6:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.079646] pci 0000:00:1c.6:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.079646] pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.079647] pci 0000:00:1c.6:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.079648] pci 0000:00:1c.6:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.079649] pci 0000:00:1c.6:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.079675] pci_bus 0000:03: extended config space not accessible
[    0.079696] pci 0000:03:00.0: [1106:3038] type 00 class 0x0c0300
[    0.079772] pci 0000:03:00.0: reg 0x20: [io  0xe020-0xe03f]
[    0.079844] pci 0000:03:00.0: supports D1 D2
[    0.079845] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.079889] pci 0000:03:00.1: [1106:3038] type 00 class 0x0c0300
[    0.079967] pci 0000:03:00.1: reg 0x20: [io  0xe000-0xe01f]
[    0.080040] pci 0000:03:00.1: supports D1 D2
[    0.080040] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
[    0.080085] pci 0000:03:00.2: [1106:3104] type 00 class 0x0c0320
[    0.080110] pci 0000:03:00.2: reg 0x10: [mem 0xf7c00000-0xf7c000ff]
[    0.080232] pci 0000:03:00.2: supports D1 D2
[    0.080233] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot
[    0.080334] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
[    0.080341] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.080345] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.080353] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff] (subtractive decode)
[    0.080353] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[    0.080354] pci 0000:02:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.080355] pci 0000:02:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.080356] pci 0000:02:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.080357] pci 0000:02:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.080358] pci 0000:02:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.080359] pci 0000:02:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.080360] pci 0000:02:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.080361] pci 0000:02:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.080362] pci 0000:02:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.080363] pci 0000:02:00.0:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.081291] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.081346] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.081399] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.081452] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.081505] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.081558] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.081612] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.081665] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.081961] SCSI subsystem initialized
[    0.081968] libata version 3.00 loaded.
[    0.081968] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.081968] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.081968] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.081968] vgaarb: loaded
[    0.081968] ACPI: bus type USB registered
[    0.081968] usbcore: registered new interface driver usbfs
[    0.081968] usbcore: registered new interface driver hub
[    0.081968] usbcore: registered new device driver usb
[    0.081968] pps_core: LinuxPPS API ver. 1 registered
[    0.081968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.081968] PTP clock support registered
[    0.081968] EDAC MC: Ver: 3.0.0
[    0.081968] PCI: Using ACPI for IRQ routing
[    0.081968] PCI: pci_cache_line_size set to 64 bytes
[    0.081968] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.081968] e820: reserve RAM buffer [mem 0xb96ac000-0xbbffffff]
[    0.081968] e820: reserve RAM buffer [mem 0xba321000-0xbbffffff]
[    0.081968] e820: reserve RAM buffer [mem 0xcd43d000-0xcfffffff]
[    0.081968] e820: reserve RAM buffer [mem 0xcd4ec000-0xcfffffff]
[    0.081968] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.081968] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.081968] NetLabel: Initializing
[    0.081968] NetLabel:  domain hash size = 128
[    0.081968] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.081968] NetLabel:  unlabeled traffic allowed by default
[    0.081968] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.081968] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.085014] clocksource: Switched to clocksource tsc-early
[    0.092015] VFS: Disk quotas dquot_6.6.0
[    0.092025] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.092101] AppArmor: AppArmor Filesystem Enabled
[    0.092118] pnp: PnP ACPI init
[    0.092238] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.092242] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.092331] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.092333] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092350] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.092382] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.092385] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.092468] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.092470] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092674] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.092677] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.092827] pnp 00:06: [dma 0 disabled]
[    0.092864] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.093319] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.093320] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.093322] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.093323] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.093324] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.093326] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.093327] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.093328] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.093330] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.093331] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.093332] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.093335] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.093518] pnp: PnP ACPI: found 8 devices
[    0.098842] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.098868] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.098877] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.098879] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.098885] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.098896] pci 0000:00:1c.6: PCI bridge to [bus 02-03]
[    0.098898] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.098901] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.098907] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.098908] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.098909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.098910] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.098912] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.098913] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.098914] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.098915] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.098916] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.098917] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.098918] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.098919] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.098920] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.098921] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.098922] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.098923] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.098924] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.098925] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.098926] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.098927] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.098928] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.098929] pci_bus 0000:02: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.098930] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.098931] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.098932] pci_bus 0000:03: resource 4 [io  0xe000-0xefff]
[    0.098933] pci_bus 0000:03: resource 5 [mem 0xf7c00000-0xf7cfffff]
[    0.098934] pci_bus 0000:03: resource 6 [io  0x0000-0x0cf7 window]
[    0.098935] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.098936] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.098937] pci_bus 0000:03: resource 9 [mem 0x000d0000-0x000d3fff window]
[    0.098938] pci_bus 0000:03: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.098939] pci_bus 0000:03: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.098940] pci_bus 0000:03: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.098941] pci_bus 0000:03: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.098942] pci_bus 0000:03: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.098943] pci_bus 0000:03: resource 15 [mem 0xdf200000-0xfeafffff window]
[    0.099069] NET: Registered protocol family 2
[    0.099185] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.099204] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.099276] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.099362] TCP: Hash tables configured (established 65536 bind 65536)
[    0.099384] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.099400] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.099434] NET: Registered protocol family 1
[    0.099437] NET: Registered protocol family 44
[    0.099444] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.124083] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c0 took 23906 usecs
[    0.148080] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c0 took 23425 usecs
[    0.148502] PCI: CLS 64 bytes, default 64
[    0.148525] Unpacking initramfs...
[    0.788148] Freeing initrd memory: 59356K
[    0.808036] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.808038] software IO TLB [mem 0xc943d000-0xcd43d000] (64MB) mapped at [(____ptrval____)-(____ptrval____)]
[    0.808175] Scanning for low memory corruption every 60 seconds
[    0.808620] Initialise system trusted keyrings
[    0.808626] Key type blacklist registered
[    0.808647] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.809524] zbud: loaded
[    0.809858] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.809974] fuse init (API version 7.27)
[    0.810009] pstore: using deflate compression
[    0.810748] Key type asymmetric registered
[    0.810748] Asymmetric key parser 'x509' registered
[    0.810774] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.810791] io scheduler noop registered
[    0.810792] io scheduler deadline registered
[    0.810811] io scheduler cfq registered (default)
[    0.811084] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.811104] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.811141] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.811141] vesafb: scrolling: redraw
[    0.811142] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.811150] vesafb: framebuffer at 0xe0000000, mapped to 0x(____ptrval____), using 8128k, total 8128k
[    0.811217] Console: switching to colour frame buffer device 240x67
[    0.811235] fb0: VESA VGA frame buffer device
[    0.811244] intel_idle: MWAIT substates: 0x42120
[    0.811245] intel_idle: v0.4.1 model 0x3C
[    0.811351] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.811460] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.811466] ACPI: Power Button [PWRB]
[    0.811489] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.811493] ACPI: Sleep Button [SLPB]
[    0.811512] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.811521] ACPI: Power Button [PWRF]
[    0.811804] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.832247] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.833484] Linux agpgart interface v0.103
[    0.834487] loop: module loaded
[    0.834595] libphy: Fixed MDIO Bus: probed
[    0.834595] tun: Universal TUN/TAP device driver, 1.6
[    0.834613] PPP generic driver version 2.4.2
[    0.834634] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.834636] ehci-pci: EHCI PCI platform driver
[    0.834724] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.834728] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.834736] ehci-pci 0000:00:1a.0: debug port 2
[    0.838626] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.838640] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3b000
[    0.852039] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.852072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.852073] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.852074] usb usb1: Product: EHCI Host Controller
[    0.852075] usb usb1: Manufacturer: Linux 4.18.0-25-generic ehci_hcd
[    0.852076] usb usb1: SerialNumber: 0000:00:1a.0
[    0.852222] hub 1-0:1.0: USB hub found
[    0.852226] hub 1-0:1.0: 2 ports detected
[    0.852406] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.852410] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.852418] ehci-pci 0000:00:1d.0: debug port 2
[    0.856326] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.856334] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3a000
[    0.872038] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.872062] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.872063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.872064] usb usb2: Product: EHCI Host Controller
[    0.872065] usb usb2: Manufacturer: Linux 4.18.0-25-generic ehci_hcd
[    0.872066] usb usb2: SerialNumber: 0000:00:1d.0
[    0.872208] hub 2-0:1.0: USB hub found
[    0.872212] hub 2-0:1.0: 2 ports detected
[    0.872367] ehci-pci 0000:03:00.2: EHCI Host Controller
[    0.872370] ehci-pci 0000:03:00.2: new USB bus registered, assigned bus number 3
[    0.872410] ehci-pci 0000:03:00.2: irq 16, io mem 0xf7c00000
[    0.888038] ehci-pci 0000:03:00.2: USB 2.0 started, EHCI 1.00
[    0.888084] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.888085] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888086] usb usb3: Product: EHCI Host Controller
[    0.888087] usb usb3: Manufacturer: Linux 4.18.0-25-generic ehci_hcd
[    0.888088] usb usb3: SerialNumber: 0000:03:00.2
[    0.888225] hub 3-0:1.0: USB hub found
[    0.888229] hub 3-0:1.0: 4 ports detected
[    0.888308] ehci-platform: EHCI generic platform driver
[    0.888314] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.888316] ohci-pci: OHCI PCI platform driver
[    0.888322] ohci-platform: OHCI generic platform driver
[    0.888326] uhci_hcd: USB Universal Host Controller Interface driver
[    0.888388] uhci_hcd 0000:03:00.0: UHCI Host Controller
[    0.888391] uhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    0.888400] uhci_hcd 0000:03:00.0: detected 2 ports
[    0.888430] uhci_hcd 0000:03:00.0: irq 18, io base 0x0000e020
[    0.888462] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    0.888463] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888464] usb usb4: Product: UHCI Host Controller
[    0.888465] usb usb4: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[    0.888466] usb usb4: SerialNumber: 0000:03:00.0
[    0.888600] hub 4-0:1.0: USB hub found
[    0.888604] hub 4-0:1.0: 2 ports detected
[    0.888729] uhci_hcd 0000:03:00.1: UHCI Host Controller
[    0.888732] uhci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 5
[    0.888739] uhci_hcd 0000:03:00.1: detected 2 ports
[    0.888768] uhci_hcd 0000:03:00.1: irq 19, io base 0x0000e000
[    0.888800] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.18
[    0.888801] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.888802] usb usb5: Product: UHCI Host Controller
[    0.888803] usb usb5: Manufacturer: Linux 4.18.0-25-generic uhci_hcd
[    0.888804] usb usb5: SerialNumber: 0000:03:00.1
[    0.888938] hub 5-0:1.0: USB hub found
[    0.888941] hub 5-0:1.0: 2 ports detected
[    0.889085] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.889090] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 6
[    0.890131] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    0.890135] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.890245] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18
[    0.890246] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.890247] usb usb6: Product: xHCI Host Controller
[    0.890248] usb usb6: Manufacturer: Linux 4.18.0-25-generic xhci-hcd
[    0.890249] usb usb6: SerialNumber: 0000:00:14.0
[    0.890389] hub 6-0:1.0: USB hub found
[    0.890404] hub 6-0:1.0: 14 ports detected
[    0.893271] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.893274] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 7
[    0.893275] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    0.893298] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18
[    0.893300] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.893300] usb usb7: Product: xHCI Host Controller
[    0.893301] usb usb7: Manufacturer: Linux 4.18.0-25-generic xhci-hcd
[    0.893302] usb usb7: SerialNumber: 0000:00:14.0
[    0.893441] hub 7-0:1.0: USB hub found
[    0.893451] hub 7-0:1.0: 6 ports detected
[    0.894975] i8042: PNP: No PS/2 controller found.
[    0.895100] mousedev: PS/2 mouse device common for all mice
[    0.895232] rtc_cmos 00:02: RTC can wake from S4
[    0.895357] rtc_cmos 00:02: registered as rtc0
[    0.895367] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.895371] i2c /dev entries driver
[    0.895401] device-mapper: uevent: version 1.0.3
[    0.895444] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    0.895448] intel_pstate: Intel P-state driver initializing
[    0.895613] ledtrig-cpu: registered to indicate activity on CPUs
[    0.895863] NET: Registered protocol family 10
[    0.898756] Segment Routing with IPv6
[    0.898769] NET: Registered protocol family 17
[    0.898818] Key type dns_resolver registered
[    0.898968] RAS: Correctable Errors collector initialized.
[    0.898987] microcode: sig=0x306c3, pf=0x2, revision=0x27
[    0.899032] microcode: Microcode Update Driver: v2.2.
[    0.899047] sched_clock: Marking stable (899030481, 0)->(875762921, 23267560)
[    0.899170] registered taskstats version 1
[    0.899175] Loading compiled-in X.509 certificates
[    0.900932] Loaded X.509 cert 'Build time autogenerated kernel key: 1905f759da59a5526cc39fe3243b9dc0d8136b3b'
[    0.900943] zswap: loaded using pool lzo/zbud
[    0.903510] Key type big_key registered
[    0.903513] Key type trusted registered
[    0.904722] Key type encrypted registered
[    0.904724] AppArmor: AppArmor sha1 policy hashing enabled
[    0.904727] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    0.904731] ima: Allocated hash algorithm: sha1
[    0.904749] evm: Initialising EVM extended attributes:
[    0.904749] evm: security.selinux
[    0.904750] evm: security.SMACK64
[    0.904750] evm: security.SMACK64EXEC
[    0.904750] evm: security.SMACK64TRANSMUTE
[    0.904751] evm: security.SMACK64MMAP
[    0.904751] evm: security.apparmor
[    0.904751] evm: security.ima
[    0.904751] evm: security.capability
[    0.904752] evm: HMAC attrs: 0x1
[    0.905092]   Magic number: 11:769:952
[    0.905109] tty tty9: hash matches
[    0.905139] memory memory5: hash matches
[    0.905170] rtc_cmos 00:02: setting system clock to 2019-07-10 20:54:17 UTC (1562792057)
[    0.906834] Freeing unused kernel image memory: 2464K
[    0.928095] Write protecting the kernel read-only data: 20480k
[    0.928507] Freeing unused kernel image memory: 2008K
[    0.928724] Freeing unused kernel image memory: 1764K
[    0.934793] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.934793] x86/mm: Checking user space page tables
[    0.940572] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.005258] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.005259] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.005293] ahci 0000:00:1f.2: version 3.0
[    1.005489] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.005514] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2a impl SATA mode
[    1.005516] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.028779] scsi host0: ahci
[    1.029000] scsi host1: ahci
[    1.030032] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    1.030033] fb: switching to inteldrmfb from VESA VGA
[    1.030044] Console: switching to colour dummy device 80x25
[    1.030063] scsi host2: ahci
[    1.030087] [drm] Replacing VGA console driver
[    1.030253] scsi host3: ahci
[    1.030308] scsi host4: ahci
[    1.030363] scsi host5: ahci
[    1.030386] ata1: DUMMY
[    1.030388] ata2: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39180 irq 28
[    1.030389] ata3: DUMMY
[    1.030390] ata4: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39280 irq 28
[    1.030390] ata5: DUMMY
[    1.030392] ata6: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39380 irq 28
[    1.040067] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.040068] [drm] Driver supports precise vblank timestamp query.
[    1.044062] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.047353] [drm] Initialized i915 1.6.0 20180514 for 0000:00:02.0 on minor 0
[    1.048512] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.048764] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.089139] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.093284] fbcon: inteldrmfb (fb0) is primary device
[    1.093330] Console: switching to colour frame buffer device 240x67
[    1.093347] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.157694] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:4b:7a:b7
[    1.157695] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.157722] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    1.158483] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.184040] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.204032] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.224035] usb 6-2: new full-speed USB device number 2 using xhci_hcd
[    1.340465] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[    1.340476] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.340971] hub 1-1:1.0: USB hub found
[    1.341089] hub 1-1:1.0: 6 ports detected
[    1.342801] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.342814] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.342882] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.343423] ata4.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    1.343424] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.344022] ata4.00: configured for UDMA/133
[    1.344741] ata2.00: supports DRM functions and may not be fully accessible
[    1.345717] ata2.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
[    1.345718] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.346597] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.346599] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.346611] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.346920] ata6.00: ATAPI: ATAPI   iHAS124   E, 4L04, max UDMA/100
[    1.348387] ata2.00: supports DRM functions and may not be fully accessible
[    1.348415] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.348427] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.348429] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.348735] ata6.00: configured for UDMA/100
[    1.351424] ata2.00: configured for UDMA/133
[    1.351596] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    1.351821] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.351823] ata2.00: Enabling discard_zeroes_data
[    1.351900] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.351907] sd 1:0:0:0: [sda] Write Protect is off
[    1.351908] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.351923] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.351930] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    1.352000] ata2.00: Enabling discard_zeroes_data
[    1.352055] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.352056] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.352061] sd 3:0:0:0: [sdb] Write Protect is off
[    1.352062] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.352070] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.352113] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.352278]  sda: sda1 sda2 sda3
[    1.352382] ata2.00: Enabling discard_zeroes_data
[    1.352788] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L04 PQ: 0 ANSI: 5
[    1.353491] sd 1:0:0:0: [sda] supports TCG Opal
[    1.353492] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.360050] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    1.360463] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[    1.360474] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.360750] hub 2-1:1.0: USB hub found
[    1.360817] hub 2-1:1.0: 8 ports detected
[    1.369346]  sdb: sdb1
[    1.369817] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.425493] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.425494] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.425633] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.425690] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.437869] random: fast init done
[    1.444511] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.444534] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.444745] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    1.555133] usb 4-1: New USB device found, idVendor=045e, idProduct=07b9, bcdDevice= 1.14
[    1.555134] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.555135] usb 4-1: Product: USB Keyboard
[    1.555136] usb 4-1: Manufacturer: LITEON Technology
[    1.577062] hidraw: raw HID events driver (C) Jiri Kosina
[    1.593187] usbcore: registered new interface driver usbhid
[    1.593188] usbhid: USB HID core driver
[    1.594636] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.0/0003:045E:07B9.0001/input/input4
[    1.656248] hid-generic 0003:045E:07B9.0001: input,hidraw0: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:03:00.0-1/input0
[    1.824035] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[    1.824038] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[    1.824061] clocksource: Switched to clocksource tsc
[    1.871424] usb 6-2: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
[    1.871425] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.871426] usb 6-2: Product: USB Audio Device
[    1.871427] usb 6-2: Manufacturer: GeneralPlus
[    1.872632] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb6/6-2/6-2:1.3/0003:1B3F:2008.0002/input/input5
[    1.932231] hid-generic 0003:1B3F:2008.0002: input,hidraw1: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:14.0-2/input3
[    2.060035] usb 6-4: new high-speed USB device number 3 using xhci_hcd
[    2.412035] usb 4-2: new full-speed USB device number 3 using uhci_hcd
[    2.594217] usb 4-2: New USB device found, idVendor=056a, idProduct=0302, bcdDevice= 1.00
[    2.594218] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.594219] usb 4-2: Product: Intuos PTS
[    2.594220] usb 4-2: Manufacturer: Wacom Co.,Ltd.
[    2.601609] hid-generic 0003:056A:0302.0003: hiddev0,hidraw2: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input0
[    2.603444] hid-generic 0003:056A:0302.0004: hiddev1,hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input1
[    2.605315] input: Wacom Co.,Ltd. Intuos PTS as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.2/0003:056A:0302.0005/input/input6
[    2.605599] hid-generic 0003:056A:0302.0005: input,hidraw4: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input2
[    2.609091] input: Wacom Intuos PT S Pen as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.0/0003:056A:0302.0003/input/input7
[    2.609142] wacom 0003:056A:0302.0003: hidraw2: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input0
[    2.609241] input: Wacom Intuos PT S Finger as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.1/0003:056A:0302.0004/input/input11
[    2.609315] input: Wacom Intuos PT S Pad as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.1/0003:056A:0302.0004/input/input12
[    2.609361] wacom 0003:056A:0302.0004: hidraw3: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-2/input1
[    4.434802] usb 6-4: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
[    4.434813] usb 6-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[    4.434814] usb 6-4: Product: HD Pro Webcam C920
[    4.434815] usb 6-4: SerialNumber: CBD3F97F
[    4.560035] usb 6-13: new low-speed USB device number 4 using xhci_hcd
[    4.711466] usb 6-13: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    4.711477] usb 6-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.711478] usb 6-13: Product: USB Optical Mouse
[    4.711479] usb 6-13: Manufacturer: Logitech
[    4.713612] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb6/6-13/6-13:1.0/0003:046D:C077.0006/input/input13
[    4.713892] hid-generic 0003:046D:C077.0006: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-13/input0
[    4.917616] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.030446] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.048155] systemd[1]: Detected architecture x86-64.
[    5.050236] systemd[1]: Set hostname to <bob-desktop>.
[    5.138595] systemd[1]: Created slice User and Session Slice.
[    5.138649] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.138769] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.138778] systemd[1]: Reached target Remote File Systems.
[    5.138783] systemd[1]: Reached target User and Group Name Lookups.
[    5.138864] systemd[1]: Created slice System Slice.
[    5.138949] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.150290] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.154478] lp: driver loaded but no devices found
[    5.160741] ppdev: user-space parallel port driver
[    5.211623] systemd-journald[366]: Received request to flush runtime journal from PID 1
[    5.453779] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.471264] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.471265] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.471267] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.471267] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.471268] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    5.471269] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.471270] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    5.471271] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    5.471272] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    5.491315] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[    5.491345] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[    5.491371] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[    5.491397] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[    5.491424] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[    5.491448] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    5.491472] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    5.491502] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    5.494344] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[    5.494376] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[    5.494402] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[    5.494429] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input25
[    5.494455] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input26
[    5.514562] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.514563] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.514563] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.514564] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.514564] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.526988] cryptd: max_cpu_qlen set to 1000
[    5.542320] AVX2 version of gcm_enc/dec engaged.
[    5.542321] AES CTR mode by8 optimization enabled
[    5.544528] media: Linux media interface: v0.10
[    5.549951] videodev: Linux video capture interface: v2.00
[    5.623059] random: crng init done
[    5.623060] random: 7 urandom warning(s) missed due to ratelimiting
[    5.644991] intel_rapl: Found RAPL domain package
[    5.644992] intel_rapl: Found RAPL domain core
[    5.644993] intel_rapl: Found RAPL domain uncore
[    5.644994] intel_rapl: Found RAPL domain dram
[    5.665154] gpio_ich: GPIO from 436 to 511 on gpio_ich
[    5.739586] usbcore: registered new interface driver snd-usb-audio
[    5.739608] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
[    5.740510] uvcvideo 6-4:1.0: Entity type for entity Processing 3 was not initialized!
[    5.740511] uvcvideo 6-4:1.0: Entity type for entity Extension 6 was not initialized!
[    5.740512] uvcvideo 6-4:1.0: Entity type for entity Extension 12 was not initialized!
[    5.740513] uvcvideo 6-4:1.0: Entity type for entity Camera 1 was not initialized!
[    5.740514] uvcvideo 6-4:1.0: Entity type for entity Extension 8 was not initialized!
[    5.740515] uvcvideo 6-4:1.0: Entity type for entity Extension 9 was not initialized!
[    5.740516] uvcvideo 6-4:1.0: Entity type for entity Extension 10 was not initialized!
[    5.740517] uvcvideo 6-4:1.0: Entity type for entity Extension 11 was not initialized!
[    5.740557] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.0/input/input27
[    5.740599] usbcore: registered new interface driver uvcvideo
[    5.740600] USB Video Class driver (1.1.1)
[    5.800610] Adding 3383292k swap on /dev/sda3.  Priority:-2 extents:1 across:3383292k SSFS
[    5.832262] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.868779] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    5.906947] audit: type=1400 audit(1562792062.494:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=899 comm="apparmor_parser"
[    5.907329] audit: type=1400 audit(1562792062.494:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=895 comm="apparmor_parser"
[    5.907331] audit: type=1400 audit(1562792062.494:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=895 comm="apparmor_parser"
[    5.907332] audit: type=1400 audit(1562792062.494:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=895 comm="apparmor_parser"
[    5.907334] audit: type=1400 audit(1562792062.494:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=895 comm="apparmor_parser"
[    5.908609] audit: type=1400 audit(1562792062.498:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=898 comm="apparmor_parser"
[    5.908611] audit: type=1400 audit(1562792062.498:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=898 comm="apparmor_parser"
[    5.908612] audit: type=1400 audit(1562792062.498:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=898 comm="apparmor_parser"
[    5.908833] audit: type=1400 audit(1562792062.498:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=900 comm="apparmor_parser"
[    5.909335] audit: type=1400 audit(1562792062.498:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=902 comm="apparmor_parser"
[    6.181029] vboxdrv: loading out-of-tree module taints kernel.
[    6.181168] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    6.186092] vboxdrv: Found 4 processor cores
[    6.204177] vboxdrv: TSC mode is Invariant, tentative frequency 3192596069 Hz
[    6.204177] vboxdrv: Successfully loaded version 6.0.8 (interface 0x00290008)
[    6.346559] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    6.407672] VBoxNetFlt: Successfully started.
[    6.409053] VBoxNetAdp: Successfully started.
[    6.409968] VBoxPciLinuxInit
[    6.413896] vboxpci: IOMMU not found (not registered)
[    6.532171] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    9.698077] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    9.698107] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   19.049400] rfkill: input handler disabled
[   40.984135] kauditd_printk_skb: 29 callbacks suppressed
[   40.984136] audit: type=1400 audit(1562792097.487:41): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=2073 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   40.984992] audit: type=1400 audit(1562792097.487:42): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=2073 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   40.986590] audit: type=1400 audit(1562792097.487:43): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=2073 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   40.987141] audit: type=1400 audit(1562792097.487:44): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=2073 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   40.990396] audit: type=1400 audit(1562792097.491:45): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/bob/.cache/mesa_shader_cache/index" pid=2073 comm="soffice.bin" requested_mask="wrc" denied_mask="wrc" fsuid=1000 ouid=1000
[   40.992603] audit: type=1400 audit(1562792097.495:46): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/usr/share/drirc.d/00-mesa-defaults.conf" pid=2073 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[   49.761634] audit: type=1400 audit(1562792106.189:47): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/bob/.thunderbird/profiles.ini" pid=2072 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[   49.765807] audit: type=1400 audit(1562792106.197:48): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/bob/.thunderbird/wcsnmjc0.default/secmod.db" pid=2072 comm="soffice.bin" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[   49.766366] audit: type=1400 audit(1562792106.197:49): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/bob/.thunderbird/wcsnmjc0.default/cert8.db" pid=2072 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[   49.766887] audit: type=1400 audit(1562792106.197:50): apparmor="ALLOWED" operation="open" profile="libreoffice-soffice" name="/home/bob/.thunderbird/wcsnmjc0.default/key3.db" pid=2072 comm="soffice.bin" requested_mask="wr" denied_mask="wr" fsuid=1000 ouid=1000
[  107.373179] usb 6-4: reset high-speed USB device number 3 using xhci_hcd


Βλέπεις κάτι άλλο?
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 659
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 11 Ιούλ 2019, 16:19

Καθάρισα τα crash reports και το μήνυμα σταμάτησε να βγαίνει:
Κώδικας: Επιλογή όλων
sudo rm /var/crash/*
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 659
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό the_eye » 16 Ιούλ 2019, 13:30

Νομίζω ότι είσαι οκ τώρα.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 22 Ιαν 2020, 19:25

Καλησπέρα @the_eye

Μπήπως θυμάσαι το πρόβλημα που είχα τον Ιούνιο, που μετά το μπουτάρισμα μου έβγαζε μήνυμα λάθους? Αυτό είχε φύγει από μόνο του. Τώρα εδώ και 2 μέρες επανήλθε.

Κώδικας: Επιλογή όλων
$ dmesg
[    0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
[    0.000000] Linux version 5.0.0-37-generic (buildd@lcy01-amd64-023) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #40~18.04.1-Ubuntu SMP Thu Nov 14 12:06:39 UTC 2019 (Ubuntu 5.0.0-37.40~18.04.1-generic 5.0.21)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b96abfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b96ac000-0x00000000b96b2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b96b3000-0x00000000ba320fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba321000-0x00000000ba7f7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba7f8000-0x00000000cd43cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd43d000-0x00000000cd4a3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd4a4000-0x00000000cd4ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd4ec000-0x00000000cd620fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd621000-0x00000000cdffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Pro3, BIOS P2.30 03/08/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3192.611 MHz processor
[    0.001740] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001741] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001747] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.001750] MTRR default type: uncachable
[    0.001750] MTRR fixed ranges enabled:
[    0.001751]   00000-9FFFF write-back
[    0.001752]   A0000-BFFFF uncachable
[    0.001752]   C0000-CFFFF write-protect
[    0.001753]   D0000-E7FFF uncachable
[    0.001753]   E8000-FFFFF write-protect
[    0.001754] MTRR variable ranges enabled:
[    0.001755]   0 base 0000000000 mask 7E00000000 write-back
[    0.001755]   1 base 0200000000 mask 7FE0000000 write-back
[    0.001756]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.001757]   3 base 00D0000000 mask 7FF0000000 uncachable
[    0.001757]   4 base 00CF000000 mask 7FFF000000 uncachable
[    0.001758]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.001758]   6 disabled
[    0.001758]   7 disabled
[    0.001759]   8 disabled
[    0.001759]   9 disabled
[    0.002418] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.002525] total RAM covered: 7918M
[    0.002766] Found optimal setting for mtrr clean up
[    0.002767]  gran_size: 64K    chunk_size: 32M    num_reg: 7     lose cover RAM: 0G
[    0.003411] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[    0.003413] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.009717] found SMP MP-table at [mem 0x000fd160-0x000fd16f]
[    0.026874] check: Scanning 1 areas for low memory corruption
[    0.026877] Using GB pages for direct mapping
[    0.026878] BRK [0x99201000, 0x99201fff] PGTABLE
[    0.026879] BRK [0x99202000, 0x99202fff] PGTABLE
[    0.026880] BRK [0x99203000, 0x99203fff] PGTABLE
[    0.026919] BRK [0x99204000, 0x99204fff] PGTABLE
[    0.026921] BRK [0x99205000, 0x99205fff] PGTABLE
[    0.027247] BRK [0x99206000, 0x99206fff] PGTABLE
[    0.027289] BRK [0x99207000, 0x99207fff] PGTABLE
[    0.027316] BRK [0x99208000, 0x99208fff] PGTABLE
[    0.027364] BRK [0x99209000, 0x99209fff] PGTABLE
[    0.027497] BRK [0x9920a000, 0x9920afff] PGTABLE
[    0.027575] RAMDISK: [mem 0x30681000-0x34337fff]
[    0.027580] ACPI: Early table checksum verification disabled
[    0.030467] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.030469] ACPI: XSDT 0x00000000CD5F0088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.030473] ACPI: FACP 0x00000000CD6006D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.030477] ACPI: DSDT 0x00000000CD5F01A8 01052F (v02 ALASKA A M I    00000230 INTL 20120711)
[    0.030479] ACPI: FACS 0x00000000CD620F80 000040
[    0.030481] ACPI: APIC 0x00000000CD6007E8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.030483] ACPI: FPDT 0x00000000CD600860 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.030484] ACPI: SSDT 0x00000000CD6008A8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.030487] ACPI: SSDT 0x00000000CD600DE8 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.030488] ACPI: SSDT 0x00000000CD601960 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20051117)
[    0.030490] ACPI: MCFG 0x00000000CD601B28 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.030492] ACPI: HPET 0x00000000CD601B68 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.030494] ACPI: SSDT 0x00000000CD601BA0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.030496] ACPI: SSDT 0x00000000CD601F10 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.030498] ACPI: AAFT 0x00000000CD607A70 00031D (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.030500] ACPI: UEFI 0x00000000CD607D90 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.030502] ACPI: DMAR 0x00000000CD607DD8 0000B8 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.030509] ACPI: Local APIC address 0xfee00000
[    0.030578] No NUMA configuration found
[    0.030579] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.030586] NODE_DATA(0) allocated [mem 0x21fdd3000-0x21fdfdfff]
[    0.030755] Zone ranges:
[    0.030755]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.030756]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.030757]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.030757]   Device   empty
[    0.030758] Movable zone start for each node
[    0.030760] Early memory node ranges
[    0.030761]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.030761]   node   0: [mem 0x0000000000100000-0x00000000b96abfff]
[    0.030762]   node   0: [mem 0x00000000b96b3000-0x00000000ba320fff]
[    0.030762]   node   0: [mem 0x00000000ba7f8000-0x00000000cd43cfff]
[    0.030763]   node   0: [mem 0x00000000cd4a4000-0x00000000cd4ebfff]
[    0.030763]   node   0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[    0.030764]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.030913] Zeroed struct page in unavailable ranges: 12476 pages
[    0.030914] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.030915] On node 0 totalpages: 2018628
[    0.030916]   DMA zone: 64 pages used for memmap
[    0.030916]   DMA zone: 21 pages reserved
[    0.030917]   DMA zone: 3996 pages, LIFO batch:0
[    0.030988]   DMA32 zone: 13055 pages used for memmap
[    0.030989]   DMA32 zone: 835496 pages, LIFO batch:63
[    0.046259]   Normal zone: 18424 pages used for memmap
[    0.046259]   Normal zone: 1179136 pages, LIFO batch:63
[    0.066578] Reserving Intel graphics memory at [mem 0xcf200000-0xdf1fffff]
[    0.066651] ACPI: PM-Timer IO Port: 0x1808
[    0.066652] ACPI: Local APIC address 0xfee00000
[    0.066657] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.066665] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.066667] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.066667] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.066668] ACPI: IRQ0 used by override.
[    0.066669] ACPI: IRQ9 used by override.
[    0.066670] Using ACPI (MADT) for SMP configuration information
[    0.066671] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.066674] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.066687] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.066688] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.066689] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.066689] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.066690] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.066691] PM: Registered nosave memory: [mem 0xb96ac000-0xb96b2fff]
[    0.066692] PM: Registered nosave memory: [mem 0xba321000-0xba7f7fff]
[    0.066693] PM: Registered nosave memory: [mem 0xcd43d000-0xcd4a3fff]
[    0.066694] PM: Registered nosave memory: [mem 0xcd4ec000-0xcd620fff]
[    0.066694] PM: Registered nosave memory: [mem 0xcd621000-0xcdffefff]
[    0.066695] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[    0.066696] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[    0.066696] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.066697] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.066697] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.066697] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.066698] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.066698] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.066698] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.066699] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.066699] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.066700] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.066700] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.066700] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.066702] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.066702] Booting paravirtualized kernel on bare hardware
[    0.066704] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.066712] random: get_random_bytes called from start_kernel+0x97/0x516 with crng_init=0
[    0.066716] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.066836] percpu: Embedded 46 pages/cpu s151552 r8192 d28672 u524288
[    0.066841] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[    0.066841] pcpu-alloc: [0] 0 1 2 3
[    0.066859] Built 1 zonelists, mobility grouping on.  Total pages: 1987064
[    0.066860] Policy zone: Normal
[    0.066861] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.0.0-37-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.069639] Calgary: detecting Calgary via BIOS EBDA area
[    0.069641] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.085348] Memory: 7785364K/8074512K available (14339K kernel code, 2336K rwdata, 4416K rodata, 2588K init, 5192K bss, 289148K reserved, 0K cma-reserved)
[    0.085445] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.085449] Kernel/User page tables isolation: enabled
[    0.085460] ftrace: allocating 41688 entries in 163 pages
[    0.099376] rcu: Hierarchical RCU implementation.
[    0.099377] rcu:    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.099377]    Tasks RCU enabled.
[    0.099378] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.099378] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.101384] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.101566] spurious 8259A interrupt: IRQ7.
[    0.101574] vt handoff: transparent VT on vt#1
[    0.101577] Console: colour dummy device 80x25
[    0.101580] printk: console [tty0] enabled
[    0.101591] ACPI: Core revision 20181213
[    0.101755] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.101761] hpet clockevent registered
[    0.101764] APIC: Switch to symmetric I/O mode setup
[    0.101765] DMAR: Host address width 39
[    0.101766] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.101770] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.101770] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.101772] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.101773] DMAR: RMRR base: 0x000000cdea5000 end: 0x000000cdeb3fff
[    0.101774] DMAR: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[    0.101775] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.101776] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.101776] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.101776] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.102121] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.102121] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.102497] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.121766] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e05060e23d, max_idle_ns: 440795293827 ns
[    0.121774] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.22 BogoMIPS (lpj=12770444)
[    0.121776] pid_max: default: 32768 minimum: 301
[    0.121800] LSM: Security Framework initializing
[    0.121806] Yama: becoming mindful.
[    0.121819] AppArmor: AppArmor initialized
[    0.122749] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.123221] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.123243] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.123257] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.123423] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.123434] process: using mwait in idle threads
[    0.123436] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.123436] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.123437] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.123438] Spectre V2 : Mitigation: Full generic retpoline
[    0.123439] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.123439] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.123444] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.123445] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.123463] MDS: Mitigation: Clear CPU buffers
[    0.123597] Freeing SMP alternatives memory: 36K
[    0.125161] TSC deadline timer enabled
[    0.125162] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.125224] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.125250] ... version:                3
[    0.125250] ... bit width:              48
[    0.125251] ... generic registers:      8
[    0.125251] ... value mask:             0000ffffffffffff
[    0.125252] ... max period:             00007fffffffffff
[    0.125252] ... fixed-purpose events:   3
[    0.125252] ... event mask:             00000007000000ff
[    0.125277] rcu: Hierarchical SRCU implementation.
[    0.125767] random: crng done (trusting CPU's manufacturer)
[    0.125767] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.125767] smp: Bringing up secondary CPUs ...
[    0.125767] x86: Booting SMP configuration:
[    0.125767] .... node  #0, CPUs:      #1 #2 #3
[    0.127244] smp: Brought up 1 node, 4 CPUs
[    0.127244] smpboot: Max logical packages: 1
[    0.127244] smpboot: Total of 4 processors activated (25540.88 BogoMIPS)
[    0.129921] devtmpfs: initialized
[    0.129921] x86/mm: Memory block size: 128MB
[    0.130239] PM: Registering ACPI NVS region [mem 0xb96ac000-0xb96b2fff] (28672 bytes)
[    0.130239] PM: Registering ACPI NVS region [mem 0xcd4ec000-0xcd620fff] (1265664 bytes)
[    0.130239] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.130239] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.130239] pinctrl core: initialized pinctrl subsystem
[    0.130239] RTC time: 16:04:22, date: 2020-01-22
[    0.130239] NET: Registered protocol family 16
[    0.130239] audit: initializing netlink subsys (disabled)
[    0.130239] audit: type=2000 audit(1579709062.028:1): state=initialized audit_enabled=0 res=1
[    0.130239] EISA bus registered
[    0.130239] cpuidle: using governor ladder
[    0.130239] cpuidle: using governor menu
[    0.130239] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.130239] ACPI: bus type PCI registered
[    0.130239] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.130239] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.130239] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.130239] PCI: Using configuration type 1 for base access
[    0.130239] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.130754] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.130754] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.130754] ACPI: Added _OSI(Module Device)
[    0.130754] ACPI: Added _OSI(Processor Device)
[    0.130754] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.130754] ACPI: Added _OSI(Processor Aggregator Device)
[    0.130754] ACPI: Added _OSI(Linux-Dell-Video)
[    0.130754] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.130754] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.146208] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.149227] ACPI: Dynamic OEM Table Load:
[    0.149231] ACPI: SSDT 0xFFFF99881607E000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.149754] ACPI: Dynamic OEM Table Load:
[    0.149757] ACPI: SSDT 0xFFFF998816087000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.150315] ACPI: Dynamic OEM Table Load:
[    0.150317] ACPI: SSDT 0xFFFF9988160E1600 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.152279] ACPI: Interpreter enabled
[    0.152305] ACPI: (supports S0 S3 S4 S5)
[    0.152305] ACPI: Using IOAPIC for interrupt routing
[    0.152370] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.153068] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.153702] ACPI: Power Resource [PG00] (on)
[    0.154114] ACPI: Power Resource [PG01] (on)
[    0.154510] ACPI: Power Resource [PG02] (on)
[    0.167221] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.167225] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.167564] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
[    0.167877] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.167877] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.168314] PCI host bridge to bus 0000:00
[    0.168316] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.168317] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.168318] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.168318] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.168319] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.168320] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.168320] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.168321] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.168322] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.168322] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.168323] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.168328] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.168411] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.168419] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.168423] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.168426] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.168504] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.168511] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
[    0.168609] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.168625] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[    0.168676] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.168749] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.168767] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3e000-0xf7d3e00f 64bit]
[    0.168821] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.168915] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[    0.168930] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[    0.168936] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3c000-0xf7d3cfff]
[    0.168942] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.168992] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.169066] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.169084] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
[    0.169157] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.169231] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.169248] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[    0.169307] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.169378] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.169440] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.169563] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[    0.169627] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.169746] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.169765] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3a000-0xf7d3a3ff]
[    0.169839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.169917] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.170077] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.170090] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.170096] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.170101] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.170107] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.170112] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.170118] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d39000-0xf7d397ff]
[    0.170147] pci 0000:00:1f.2: PME# supported from D3hot
[    0.170215] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.170229] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d38000-0xf7d380ff 64bit]
[    0.170246] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.170368] acpiphp: Slot [1] registered
[    0.170372] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.170436] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401
[    0.170582] pci 0000:00:1c.6: PCI bridge to [bus 02-03] (subtractive decode)
[    0.170584] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.170587] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.170590] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.170591] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.170592] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.170593] pci 0000:00:1c.6:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.170593] pci 0000:00:1c.6:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.170594] pci 0000:00:1c.6:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.170595] pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.170596] pci 0000:00:1c.6:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.170596] pci 0000:00:1c.6:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.170597] pci 0000:00:1c.6:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.170622] pci_bus 0000:03: extended config space not accessible
[    0.170642] pci 0000:03:00.0: [1106:3038] type 00 class 0x0c0300
[    0.170721] pci 0000:03:00.0: reg 0x20: [io  0xe020-0xe03f]
[    0.170791] pci 0000:03:00.0: supports D1 D2
[    0.170792] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.170838] pci 0000:03:00.1: [1106:3038] type 00 class 0x0c0300
[    0.170913] pci 0000:03:00.1: reg 0x20: [io  0xe000-0xe01f]
[    0.170985] pci 0000:03:00.1: supports D1 D2
[    0.170985] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
[    0.171028] pci 0000:03:00.2: [1106:3104] type 00 class 0x0c0320
[    0.171054] pci 0000:03:00.2: reg 0x10: [mem 0xf7c00000-0xf7c000ff]
[    0.171175] pci 0000:03:00.2: supports D1 D2
[    0.171175] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot
[    0.171276] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
[    0.171284] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.171287] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.171294] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff] (subtractive decode)
[    0.171295] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[    0.171296] pci 0000:02:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.171297] pci 0000:02:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.171297] pci 0000:02:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.171298] pci 0000:02:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.171299] pci 0000:02:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.171299] pci 0000:02:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.171300] pci 0000:02:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.171302] pci 0000:02:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.171303] pci 0000:02:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.171303] pci 0000:02:00.0:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.172223] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.172276] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.172326] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.172377] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.172427] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.172477] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.172527] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.172577] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.172744] SCSI subsystem initialized
[    0.172744] libata version 3.00 loaded.
[    0.172744] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.172744] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.172744] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.172744] vgaarb: loaded
[    0.172744] ACPI: bus type USB registered
[    0.172744] usbcore: registered new interface driver usbfs
[    0.172744] usbcore: registered new interface driver hub
[    0.172744] usbcore: registered new device driver usb
[    0.172744] pps_core: LinuxPPS API ver. 1 registered
[    0.172744] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.172744] PTP clock support registered
[    0.172744] EDAC MC: Ver: 3.0.0
[    0.172744] PCI: Using ACPI for IRQ routing
[    0.174394] PCI: pci_cache_line_size set to 64 bytes
[    0.174437] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.174437] e820: reserve RAM buffer [mem 0xb96ac000-0xbbffffff]
[    0.174438] e820: reserve RAM buffer [mem 0xba321000-0xbbffffff]
[    0.174439] e820: reserve RAM buffer [mem 0xcd43d000-0xcfffffff]
[    0.174440] e820: reserve RAM buffer [mem 0xcd4ec000-0xcfffffff]
[    0.174440] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.174441] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.174503] NetLabel: Initializing
[    0.174504] NetLabel:  domain hash size = 128
[    0.174504] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.174514] NetLabel:  unlabeled traffic allowed by default
[    0.174524] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.174524] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.176155] clocksource: Switched to clocksource tsc-early
[    0.181910] VFS: Disk quotas dquot_6.6.0
[    0.181921] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.181999] AppArmor: AppArmor Filesystem Enabled
[    0.182017] pnp: PnP ACPI init
[    0.182146] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.182149] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.182240] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.182243] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.182257] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.182289] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.182291] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.182373] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.182375] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.182578] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.182580] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.182730] pnp 00:06: [dma 0 disabled]
[    0.182763] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.183219] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.183220] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.183221] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.183221] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.183222] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.183223] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.183224] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.183225] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.183226] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.183227] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.183228] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.183230] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.183412] pnp: PnP ACPI: found 8 devices
[    0.188748] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.188775] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.188784] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.188786] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.188792] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.188802] pci 0000:00:1c.6: PCI bridge to [bus 02-03]
[    0.188804] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.188807] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.188813] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.188814] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.188815] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.188815] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.188816] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.188817] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.188817] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.188818] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.188819] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.188820] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.188820] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.188821] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.188822] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.188823] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.188823] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.188824] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.188825] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.188825] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.188826] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.188827] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.188827] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.188828] pci_bus 0000:02: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.188829] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.188830] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.188830] pci_bus 0000:03: resource 4 [io  0xe000-0xefff]
[    0.188831] pci_bus 0000:03: resource 5 [mem 0xf7c00000-0xf7cfffff]
[    0.188832] pci_bus 0000:03: resource 6 [io  0x0000-0x0cf7 window]
[    0.188832] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.188833] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.188834] pci_bus 0000:03: resource 9 [mem 0x000d0000-0x000d3fff window]
[    0.188835] pci_bus 0000:03: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.188835] pci_bus 0000:03: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.188836] pci_bus 0000:03: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.188837] pci_bus 0000:03: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.188837] pci_bus 0000:03: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.188838] pci_bus 0000:03: resource 15 [mem 0xdf200000-0xfeafffff window]
[    0.188965] NET: Registered protocol family 2
[    0.189077] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.189096] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.189169] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.189257] TCP: Hash tables configured (established 65536 bind 65536)
[    0.189277] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.189294] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.189343] NET: Registered protocol family 1
[    0.189347] NET: Registered protocol family 44
[    0.189354] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.213852] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 23762 usecs
[    0.237848] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 23425 usecs
[    0.238257] PCI: CLS 64 bytes, default 64
[    0.238281] Unpacking initramfs...
[    0.877105] Freeing initrd memory: 62172K
[    0.897808] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.897809] software IO TLB: mapped [mem 0xc943d000-0xcd43d000] (64MB)
[    0.897951] check: Scanning for low memory corruption every 60 seconds
[    0.899090] Initialise system trusted keyrings
[    0.899095] Key type blacklist registered
[    0.899116] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.900042] zbud: loaded
[    0.900341] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.900477] fuse init (API version 7.28)
[    0.926109] Key type asymmetric registered
[    0.926110] Asymmetric key parser 'x509' registered
[    0.926116] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[    0.926133] io scheduler mq-deadline registered
[    0.926371] pcieport 0000:00:1c.0: Signaling PME with IRQ 26
[    0.926427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.926464] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.926465] vesafb: scrolling: redraw
[    0.926465] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.926475] vesafb: framebuffer at 0xe0000000, mapped to 0x000000000bf2e226, using 8128k, total 8128k
[    0.926536] Console: switching to colour frame buffer device 240x67
[    0.926554] fb0: VESA VGA frame buffer device
[    0.926562] intel_idle: MWAIT substates: 0x42120
[    0.926562] intel_idle: v0.4.1 model 0x3C
[    0.926677] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.926781] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.926788] ACPI: Power Button [PWRB]
[    0.926808] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.926813] ACPI: Sleep Button [SLPB]
[    0.926832] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.926853] ACPI: Power Button [PWRF]
[    0.927201] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.947649] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.949048] Linux agpgart interface v0.103
[    0.950393] loop: module loaded
[    0.950514] libphy: Fixed MDIO Bus: probed
[    0.950515] tun: Universal TUN/TAP device driver, 1.6
[    0.950530] PPP generic driver version 2.4.2
[    0.950551] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.950553] ehci-pci: EHCI PCI platform driver
[    0.950647] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.950651] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.950660] ehci-pci 0000:00:1a.0: debug port 2
[    0.954568] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.954583] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3b000
[    0.969812] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.969846] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    0.969847] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.969847] usb usb1: Product: EHCI Host Controller
[    0.969848] usb usb1: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
[    0.969849] usb usb1: SerialNumber: 0000:00:1a.0
[    0.969992] hub 1-0:1.0: USB hub found
[    0.969996] hub 1-0:1.0: 2 ports detected
[    0.970171] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.970174] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.970182] ehci-pci 0000:00:1d.0: debug port 2
[    0.974069] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.974077] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3a000
[    0.989805] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.989832] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    0.989833] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.989834] usb usb2: Product: EHCI Host Controller
[    0.989835] usb usb2: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
[    0.989835] usb usb2: SerialNumber: 0000:00:1d.0
[    0.989975] hub 2-0:1.0: USB hub found
[    0.989978] hub 2-0:1.0: 2 ports detected
[    0.990130] ehci-pci 0000:03:00.2: EHCI Host Controller
[    0.990133] ehci-pci 0000:03:00.2: new USB bus registered, assigned bus number 3
[    0.990174] ehci-pci 0000:03:00.2: irq 16, io mem 0xf7c00000
[    1.005805] ehci-pci 0000:03:00.2: USB 2.0 started, EHCI 1.00
[    1.005848] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.005849] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.005850] usb usb3: Product: EHCI Host Controller
[    1.005851] usb usb3: Manufacturer: Linux 5.0.0-37-generic ehci_hcd
[    1.005851] usb usb3: SerialNumber: 0000:03:00.2
[    1.005984] hub 3-0:1.0: USB hub found
[    1.005987] hub 3-0:1.0: 4 ports detected
[    1.006066] ehci-platform: EHCI generic platform driver
[    1.006071] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.006074] ohci-pci: OHCI PCI platform driver
[    1.006079] ohci-platform: OHCI generic platform driver
[    1.006084] uhci_hcd: USB Universal Host Controller Interface driver
[    1.006147] uhci_hcd 0000:03:00.0: UHCI Host Controller
[    1.006150] uhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    1.006156] uhci_hcd 0000:03:00.0: detected 2 ports
[    1.006186] uhci_hcd 0000:03:00.0: irq 18, io base 0x0000e020
[    1.006220] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.006220] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.006221] usb usb4: Product: UHCI Host Controller
[    1.006222] usb usb4: Manufacturer: Linux 5.0.0-37-generic uhci_hcd
[    1.006222] usb usb4: SerialNumber: 0000:03:00.0
[    1.006354] hub 4-0:1.0: USB hub found
[    1.006358] hub 4-0:1.0: 2 ports detected
[    1.006482] uhci_hcd 0000:03:00.1: UHCI Host Controller
[    1.006486] uhci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 5
[    1.006493] uhci_hcd 0000:03:00.1: detected 2 ports
[    1.006521] uhci_hcd 0000:03:00.1: irq 19, io base 0x0000e000
[    1.006553] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.00
[    1.006554] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.006555] usb usb5: Product: UHCI Host Controller
[    1.006555] usb usb5: Manufacturer: Linux 5.0.0-37-generic uhci_hcd
[    1.006556] usb usb5: SerialNumber: 0000:03:00.1
[    1.006687] hub 5-0:1.0: USB hub found
[    1.006691] hub 5-0:1.0: 2 ports detected
[    1.006835] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.006838] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 6
[    1.007877] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    1.007881] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.007991] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.00
[    1.007992] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.007992] usb usb6: Product: xHCI Host Controller
[    1.007993] usb usb6: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
[    1.007994] usb usb6: SerialNumber: 0000:00:14.0
[    1.008131] hub 6-0:1.0: USB hub found
[    1.008146] hub 6-0:1.0: 14 ports detected
[    1.010922] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.010924] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 7
[    1.010925] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.010949] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.00
[    1.010950] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.010950] usb usb7: Product: xHCI Host Controller
[    1.010951] usb usb7: Manufacturer: Linux 5.0.0-37-generic xhci-hcd
[    1.010952] usb usb7: SerialNumber: 0000:00:14.0
[    1.011088] hub 7-0:1.0: USB hub found
[    1.011098] hub 7-0:1.0: 6 ports detected
[    1.012620] i8042: PNP: No PS/2 controller found.
[    1.012752] mousedev: PS/2 mouse device common for all mice
[    1.012885] rtc_cmos 00:02: RTC can wake from S4
[    1.013016] rtc_cmos 00:02: registered as rtc0
[    1.013027] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.013032] i2c /dev entries driver
[    1.013084] device-mapper: uevent: version 1.0.3
[    1.013136] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com
[    1.013151] platform eisa.0: Probing EISA bus 0
[    1.013152] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.013153] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.013154] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.013154] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.013155] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.013155] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.013156] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.013157] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.013157] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.013158] platform eisa.0: EISA: Detected 0 cards
[    1.013161] intel_pstate: Intel P-state driver initializing
[    1.013345] ledtrig-cpu: registered to indicate activity on CPUs
[    1.013519] NET: Registered protocol family 10
[    1.017554] Segment Routing with IPv6
[    1.017579] NET: Registered protocol family 17
[    1.017607] Key type dns_resolver registered
[    1.017741] mce: Using 9 MCE banks
[    1.017748] RAS: Correctable Errors collector initialized.
[    1.017767] microcode: sig=0x306c3, pf=0x2, revision=0x27
[    1.017846] microcode: Microcode Update Driver: v2.2.
[    1.017853] sched_clock: Marking stable (1017629841, 214424)->(1024699888, -6855623)
[    1.018081] registered taskstats version 1
[    1.018089] Loading compiled-in X.509 certificates
[    1.019271] Loaded X.509 cert 'Build time autogenerated kernel key: 88fcad88465f792265cf358553c118dce4c5c672'
[    1.019282] zswap: loaded using pool lzo/zbud
[    1.022971] Key type big_key registered
[    1.022974] Key type trusted registered
[    1.024761] Key type encrypted registered
[    1.024762] AppArmor: AppArmor sha1 policy hashing enabled
[    1.024766] ima: No TPM chip found, activating TPM-bypass!
[    1.024768] ima: Allocated hash algorithm: sha1
[    1.024772] No architecture policies found
[    1.024787] evm: Initialising EVM extended attributes:
[    1.024788] evm: security.selinux
[    1.024788] evm: security.SMACK64
[    1.024789] evm: security.SMACK64EXEC
[    1.024789] evm: security.SMACK64TRANSMUTE
[    1.024789] evm: security.SMACK64MMAP
[    1.024789] evm: security.apparmor
[    1.024790] evm: security.ima
[    1.024790] evm: security.capability
[    1.024790] evm: HMAC attrs: 0x1
[    1.025134]   Magic number: 4:831:85
[    1.025155] event_source uncore_cbox_3: hash matches
[    1.025233] rtc_cmos 00:02: setting system clock to 2020-01-22T16:04:23 UTC (1579709063)
[    1.026184] Freeing unused decrypted memory: 2040K
[    1.026494] Freeing unused kernel image memory: 2588K
[    1.045809] Write protecting the kernel read-only data: 22528k
[    1.046226] Freeing unused kernel image memory: 2016K
[    1.046465] Freeing unused kernel image memory: 1728K
[    1.053568] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.053569] x86/mm: Checking user space page tables
[    1.060386] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.060387] Run /init as init process
[    1.128887] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.128887] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.129029] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.129779] ahci 0000:00:1f.2: version 3.0
[    1.129914] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2a impl SATA mode
[    1.129915] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.150315] scsi host0: ahci
[    1.150519] scsi host1: ahci
[    1.150642] scsi host2: ahci
[    1.150748] scsi host3: ahci
[    1.150813] scsi host4: ahci
[    1.150868] scsi host5: ahci
[    1.150900] ata1: DUMMY
[    1.150902] ata2: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39180 irq 29
[    1.150902] ata3: DUMMY
[    1.150904] ata4: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39280 irq 29
[    1.150904] ata5: DUMMY
[    1.150905] ata6: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39380 irq 29
[    1.172125] VFIO - User Level meta-driver version: 0.3
[    1.190772] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    1.190773] fb0: switching to inteldrmfb from VESA VGA
[    1.190797] Console: switching to colour dummy device 80x25
[    1.190853] [drm] Replacing VGA console driver
[    1.191568] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.191568] [drm] Driver supports precise vblank timestamp query.
[    1.191907] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.196710] [drm] Initialized i915 1.6.0 20181204 for 0000:00:02.0 on minor 0
[    1.198104] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.198338] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.202763] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.237721] fbcon: inteldrmfb (fb0) is primary device
[    1.237749] Console: switching to colour frame buffer device 240x67
[    1.237766] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    1.271480] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:4b:7a:b7
[    1.271481] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.271507] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    1.272293] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.309812] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.321805] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.341802] usb 6-2: new full-speed USB device number 2 using xhci_hcd
[    1.464576] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.464588] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.464608] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.465243] ata4.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    1.465244] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.465970] ata4.00: configured for UDMA/133
[    1.466159] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[    1.466160] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.466429] hub 1-1:1.0: USB hub found
[    1.466511] ata2.00: supports DRM functions and may not be fully accessible
[    1.466515] hub 1-1:1.0: 6 ports detected
[    1.467347] ata2.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
[    1.467348] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.468446] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.468448] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.468448] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.468750] ata6.00: ATAPI: ATAPI   iHAS124   E, 4L04, max UDMA/100
[    1.470276] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.470277] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.470278] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.470285] ata2.00: supports DRM functions and may not be fully accessible
[    1.470583] ata6.00: configured for UDMA/100
[    1.473251] ata2.00: configured for UDMA/133
[    1.473437] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    1.473647] ata2.00: Enabling discard_zeroes_data
[    1.473683] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.473747] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.473754] sd 1:0:0:0: [sda] Write Protect is off
[    1.473755] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.473766] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.473812] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    1.473902] ata2.00: Enabling discard_zeroes_data
[    1.473935] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.473948] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.473949] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.473953] sd 3:0:0:0: [sdb] Write Protect is off
[    1.473954] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.473963] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.474357]  sda: sda1 sda2 sda3
[    1.474700] ata2.00: Enabling discard_zeroes_data
[    1.474747] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L04 PQ: 0 ANSI: 5
[    1.475893] sd 1:0:0:0: [sda] supports TCG Opal
[    1.475894] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.482146] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[    1.482147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.482428] hub 2-1:1.0: USB hub found
[    1.482524] hub 2-1:1.0: 8 ports detected
[    1.488974]  sdb: sdb1
[    1.489363] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.542989] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.542999] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.543197] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.543333] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.545775] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    1.730893] usb 4-1: New USB device found, idVendor=056a, idProduct=0302, bcdDevice= 1.00
[    1.730894] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.730895] usb 4-1: Product: Intuos PTS
[    1.730895] usb 4-1: Manufacturer: Wacom Co.,Ltd.
[    1.735811] hidraw: raw HID events driver (C) Jiri Kosina
[    1.745892] usbcore: registered new interface driver usbhid
[    1.745892] usbhid: USB HID core driver
[    1.747683] hid-generic 0003:056A:0302.0001: hiddev0,hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input0
[    1.747840] hid-generic 0003:056A:0302.0002: hiddev1,hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input1
[    1.747902] input: Wacom Co.,Ltd. Intuos PTS as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.2/0003:056A:0302.0003/input/input4
[    1.748035] hid-generic 0003:056A:0302.0003: input,hidraw2: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input2
[    1.749720] input: Wacom Intuos PT S Pen as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.0/0003:056A:0302.0001/input/input5
[    1.749776] wacom 0003:056A:0302.0001: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input0
[    1.749922] input: Wacom Intuos PT S Finger as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.1/0003:056A:0302.0002/input/input9
[    1.750033] input: Wacom Intuos PT S Pad as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.1/0003:056A:0302.0002/input/input10
[    1.750134] wacom 0003:056A:0302.0002: hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input1
[    1.925800] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[    1.925803] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[    1.925826] clocksource: Switched to clocksource tsc
[    1.989123] usb 6-2: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
[    1.989124] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.989124] usb 6-2: Product: USB Audio Device
[    1.989125] usb 6-2: Manufacturer: GeneralPlus
[    1.990328] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb6/6-2/6-2:1.3/0003:1B3F:2008.0004/input/input11
[    2.050008] hid-generic 0003:1B3F:2008.0004: input,hidraw2: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:14.0-2/input3
[    2.177802] usb 6-4: new high-speed USB device number 3 using xhci_hcd
[    2.513801] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[    2.709990] usb 4-2: New USB device found, idVendor=045e, idProduct=07b9, bcdDevice= 1.14
[    2.709991] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.709992] usb 4-2: Product: USB Keyboard
[    2.709993] usb 4-2: Manufacturer: LITEON Technology
[    2.744118] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.0/0003:045E:07B9.0005/input/input12
[    2.801994] hid-generic 0003:045E:07B9.0005: input,hidraw3: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:03:00.0-2/input0
[    4.568552] usb 6-4: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
[    4.568562] usb 6-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[    4.568563] usb 6-4: Product: HD Pro Webcam C920
[    4.568564] usb 6-4: SerialNumber: CBD3F97F
[    4.693802] usb 6-13: new low-speed USB device number 4 using xhci_hcd
[    4.845379] usb 6-13: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    4.845380] usb 6-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.845391] usb 6-13: Product: USB Optical Mouse
[    4.845392] usb 6-13: Manufacturer: Logitech
[    4.847533] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb6/6-13/6-13:1.0/0003:046D:C077.0006/input/input13
[    4.847810] hid-generic 0003:046D:C077.0006: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-13/input0
[    5.040997] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.151792] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.169906] systemd[1]: Detected architecture x86-64.
[    5.171989] systemd[1]: Set hostname to <bob-desktop>.
[    5.260127] systemd[1]: Created slice System Slice.
[    5.260185] systemd[1]: Listening on udev Kernel Socket.
[    5.260263] systemd[1]: Created slice User and Session Slice.
[    5.260270] systemd[1]: Reached target Slices.
[    5.260342] systemd[1]: Listening on Journal Audit Socket.
[    5.260350] systemd[1]: Reached target User and Group Name Lookups.
[    5.260387] systemd[1]: Listening on Syslog Socket.
[    5.276209] lp: driver loaded but no devices found
[    5.279650] ppdev: user-space parallel port driver
[    5.280379] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.354240] systemd-journald[449]: Received request to flush runtime journal from PID 1
[    5.552814] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20181213/utaddress-213)
[    5.552817] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.552819] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
[    5.552821] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.552822] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20181213/utaddress-213)
[    5.552824] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
[    5.552825] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.552826] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20181213/utaddress-213)
[    5.552827] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20181213/utaddress-213)
[    5.552829] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.552829] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.590670] snd_hda_intel 0000:00:03.0: Linked as a consumer to 0000:00:02.0
[    5.590701] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.621047] media: Linux media interface: v0.10
[    5.621918] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    5.621963] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    5.621994] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    5.622025] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    5.622060] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    5.627637] videodev: Linux video capture interface: v2.00
[    5.627870] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.627871] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.627872] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.627872] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.627873] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    5.627873] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.627875] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    5.627875] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    5.627876] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    5.655205] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    5.655304] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    5.655351] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    5.655430] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[    5.655478] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[    5.655512] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[    5.655541] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
[    5.656421] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26
[    5.683646] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.683647] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.683648] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.683648] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.683648] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.713604] cryptd: max_cpu_qlen set to 1000
[    5.731675] AVX2 version of gcm_enc/dec engaged.
[    5.731676] AES CTR mode by8 optimization enabled
[    5.828300] usbcore: registered new interface driver snd-usb-audio
[    5.828481] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
[    5.830433] uvcvideo 6-4:1.0: Entity type for entity Processing 3 was not initialized!
[    5.830435] uvcvideo 6-4:1.0: Entity type for entity Extension 6 was not initialized!
[    5.830435] uvcvideo 6-4:1.0: Entity type for entity Extension 12 was not initialized!
[    5.830436] uvcvideo 6-4:1.0: Entity type for entity Camera 1 was not initialized!
[    5.830437] uvcvideo 6-4:1.0: Entity type for entity Extension 8 was not initialized!
[    5.830438] uvcvideo 6-4:1.0: Entity type for entity Extension 9 was not initialized!
[    5.830438] uvcvideo 6-4:1.0: Entity type for entity Extension 10 was not initialized!
[    5.830439] uvcvideo 6-4:1.0: Entity type for entity Extension 11 was not initialized!
[    5.830483] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.0/input/input27
[    5.831018] usbcore: registered new interface driver uvcvideo
[    5.831018] USB Video Class driver (1.1.1)
[    5.850331] intel_rapl: Found RAPL domain package
[    5.850332] intel_rapl: Found RAPL domain core
[    5.850332] intel_rapl: Found RAPL domain uncore
[    5.850333] intel_rapl: Found RAPL domain dram
[    5.905794] Adding 3383292k swap on /dev/sda3.  Priority:-2 extents:1 across:3383292k SSFS
[    6.360266] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.396641] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    6.536942] audit: type=1400 audit(1579709069.004:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1016 comm="apparmor_parser"
[    6.537321] audit: type=1400 audit(1579709069.004:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1015 comm="apparmor_parser"
[    6.537323] audit: type=1400 audit(1579709069.004:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1015 comm="apparmor_parser"
[    6.537324] audit: type=1400 audit(1579709069.004:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1015 comm="apparmor_parser"
[    6.538723] audit: type=1400 audit(1579709069.008:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1018 comm="apparmor_parser"
[    6.538816] audit: type=1400 audit(1579709069.008:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1012 comm="apparmor_parser"
[    6.538818] audit: type=1400 audit(1579709069.008:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1012 comm="apparmor_parser"
[    6.538819] audit: type=1400 audit(1579709069.008:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1012 comm="apparmor_parser"
[    6.538821] audit: type=1400 audit(1579709069.008:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1012 comm="apparmor_parser"
[    6.540251] audit: type=1400 audit(1579709069.008:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1020 comm="apparmor_parser"
[    8.733923] usb 6-4: reset high-speed USB device number 3 using xhci_hcd
[    8.882104] usb 6-4: device firmware changed
[    8.884129] usb 6-4: USB disconnect, device number 3
[    8.884473] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.884526] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.884541] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.884624] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.884707] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.884950] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.884965] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.884978] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.885046] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.885123] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.885405] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.885451] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.885496] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.885587] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.885688] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886033] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886083] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886133] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886231] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886333] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886597] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886612] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886625] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886686] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886757] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.886998] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887013] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887025] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887086] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887164] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887468] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887515] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887558] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887647] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.887745] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.888109] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.888159] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.888212] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.888302] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.888403] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.896756] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.896775] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.896790] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.896870] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.896955] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897096] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897115] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897129] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897202] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897276] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897474] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897528] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897580] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.897676] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.899568] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.899850] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.899901] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.899949] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900043] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900148] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900290] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900305] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900318] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900380] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900450] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900563] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900576] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900588] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900649] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900718] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900882] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900928] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.900971] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.901059] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.901160] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.901393] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.901441] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.901488] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.901578] usb 6-4: 3:3: usb_set_interface failed (-19)
[    8.901677] usb 6-4: 3:3: usb_set_interface failed (-19)
[    9.065784] usb 6-4: new high-speed USB device number 5 using xhci_hcd
[   11.048007] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   11.048039] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   11.448462] usb 6-4: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
[   11.448463] usb 6-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[   11.448464] usb 6-4: Product: HD Pro Webcam C920
[   11.448465] usb 6-4: SerialNumber: CBD3F97F
[   11.449039] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
[   11.451017] uvcvideo 6-4:1.0: Entity type for entity Processing 3 was not initialized!
[   11.451018] uvcvideo 6-4:1.0: Entity type for entity Extension 6 was not initialized!
[   11.451019] uvcvideo 6-4:1.0: Entity type for entity Extension 12 was not initialized!
[   11.451020] uvcvideo 6-4:1.0: Entity type for entity Camera 1 was not initialized!
[   11.451020] uvcvideo 6-4:1.0: Entity type for entity Extension 8 was not initialized!
[   11.451021] uvcvideo 6-4:1.0: Entity type for entity Extension 9 was not initialized!
[   11.451022] uvcvideo 6-4:1.0: Entity type for entity Extension 10 was not initialized!
[   11.451023] uvcvideo 6-4:1.0: Entity type for entity Extension 11 was not initialized!
[   11.451070] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.0/input/input28
[   18.967197] rfkill: input handler disabled
[   22.206780] vboxdrv: loading out-of-tree module taints kernel.
[   22.206946] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   22.215197] vboxdrv: Found 4 processor cores
[   22.238143] vboxdrv: TSC mode is Invariant, tentative frequency 3192605074 Hz
[   22.238144] vboxdrv: Successfully loaded version 6.0.8 (interface 0x00290008)
[   22.445583] VBoxNetFlt: Successfully started.
[   22.449450] VBoxNetAdp: Successfully started.
[   22.450509] VBoxPciLinuxInit
[   22.451879] vboxpci: IOMMU not found (not registered)
[   41.052232] SUPR0GipMap: fGetGipCpu=0xb
[   41.672075] usb 6-4: reset high-speed USB device number 5 using xhci_hcd
[   41.937464] vboxdrv: 0000000000000000 VMMR0.r0
[   42.064710] vboxdrv: 0000000000000000 VBoxDDR0.r0
[   42.112769] VBoxNetFlt: attached to 'enp0s25' / d0:50:99:4b:7a:b7
[   42.151695] device enp0s25 entered promiscuous mode
[   42.162962] vboxdrv: 0000000000000000 VBoxEhciR0.r0
[   71.927531] device enp0s25 left promiscuous mode
[   72.035183] vboxnetflt: 0 out of 320 packets were not sent (directed to host)


Μήπως να δούμε το syslog?
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 659
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό the_eye » 22 Ιαν 2020, 20:59

Κάποιο πρόβλημα βλέπω με το VBox, δεν είναι κάτι σημαντικό.
[ 22.206780] vboxdrv: loading out-of-tree module taints kernel.
[ 22.206946] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel

Καλύτερα να αφαιρέσεις και να ξαναστήσεις το vbox.
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 22.04 Jammy Jellyfish 5.15.0-58-generic 64bit (el_GR.UTF-8, ubuntu:GNOME ubuntu)
3 Intel Core i3-6100 CPU @ 3.70GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Οδηγοί Ubuntu Βίντεο Οδηγοί
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11671
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 22 Ιαν 2020, 21:09

the_eye έγραψε:Καλύτερα να αφαιρέσεις και να ξαναστήσεις το vbox.


Δεν είναι και άσχημη ιδέα. Τελευταία το Vbox δε δουλεύει και με παιδεύει. ( viewtopic.php?f=41&t=33724 )
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 659
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

Re: system program problem detected

Δημοσίευσηαπό bobptz » 23 Ιαν 2020, 00:03

the_eye έγραψε:Καλύτερα να αφαιρέσεις και να ξαναστήσεις το vbox.


Το έκανα και το VBox έστρωσε. ΌΜΩΣ το πρόβλημα με το System program problem παρέμεινε. Να το φρέσκο dmesg:
Κώδικας: Επιλογή όλων
dmesg
[    0.000000] microcode: microcode updated early to revision 0x27, date = 2019-02-26
[    0.000000] Linux version 5.3.0-26-generic (buildd@lgw01-amd64-039) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #28~18.04.1-Ubuntu SMP Wed Dec 18 16:40:14 UTC 2019 (Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai 
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b96abfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b96ac000-0x00000000b96b2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b96b3000-0x00000000ba320fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ba321000-0x00000000ba7f7fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ba7f8000-0x00000000cd43cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd43d000-0x00000000cd4a3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cd4a4000-0x00000000cd4ebfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cd4ec000-0x00000000cd620fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cd621000-0x00000000cdffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cdfff000-0x00000000cdffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf000000-0x00000000df1fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 Pro3, BIOS P2.30 03/08/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3192.909 MHz processor
[    0.001837] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001838] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001843] last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[    0.001846] MTRR default type: uncachable
[    0.001847] MTRR fixed ranges enabled:
[    0.001847]   00000-9FFFF write-back
[    0.001848]   A0000-BFFFF uncachable
[    0.001848]   C0000-CFFFF write-protect
[    0.001849]   D0000-E7FFF uncachable
[    0.001850]   E8000-FFFFF write-protect
[    0.001850] MTRR variable ranges enabled:
[    0.001851]   0 base 0000000000 mask 7E00000000 write-back
[    0.001852]   1 base 0200000000 mask 7FE0000000 write-back
[    0.001853]   2 base 00E0000000 mask 7FE0000000 uncachable
[    0.001853]   3 base 00D0000000 mask 7FF0000000 uncachable
[    0.001854]   4 base 00CF000000 mask 7FFF000000 uncachable
[    0.001854]   5 base 021FE00000 mask 7FFFE00000 uncachable
[    0.001855]   6 disabled
[    0.001855]   7 disabled
[    0.001855]   8 disabled
[    0.001856]   9 disabled
[    0.002088] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.002193] total RAM covered: 7918M
[    0.002427] Found optimal setting for mtrr clean up
[    0.002428]  gran_size: 64K    chunk_size: 32M    num_reg: 7     lose cover RAM: 0G
[    0.002641] e820: update [mem 0xcf000000-0xffffffff] usable ==> reserved
[    0.002643] last_pfn = 0xce000 max_arch_pfn = 0x400000000
[    0.008821] found SMP MP-table at [mem 0x000fd160-0x000fd16f]
[    0.025943] check: Scanning 1 areas for low memory corruption
[    0.025947] Using GB pages for direct mapping
[    0.025948] BRK [0xcc601000, 0xcc601fff] PGTABLE
[    0.025949] BRK [0xcc602000, 0xcc602fff] PGTABLE
[    0.025950] BRK [0xcc603000, 0xcc603fff] PGTABLE
[    0.025990] BRK [0xcc604000, 0xcc604fff] PGTABLE
[    0.025991] BRK [0xcc605000, 0xcc605fff] PGTABLE
[    0.026197] BRK [0xcc606000, 0xcc606fff] PGTABLE
[    0.026232] BRK [0xcc607000, 0xcc607fff] PGTABLE
[    0.026321] BRK [0xcc608000, 0xcc608fff] PGTABLE
[    0.026575] BRK [0xcc609000, 0xcc609fff] PGTABLE
[    0.026652] RAMDISK: [mem 0x302b1000-0x3414ffff]
[    0.026658] ACPI: Early table checksum verification disabled
[    0.026660] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.026662] ACPI: XSDT 0x00000000CD5F0088 00008C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.026666] ACPI: FACP 0x00000000CD6006D8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.026670] ACPI: DSDT 0x00000000CD5F01A8 01052F (v02 ALASKA A M I    00000230 INTL 20120711)
[    0.026672] ACPI: FACS 0x00000000CD620F80 000040
[    0.026674] ACPI: APIC 0x00000000CD6007E8 000072 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.026676] ACPI: FPDT 0x00000000CD600860 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.026678] ACPI: SSDT 0x00000000CD6008A8 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.026680] ACPI: SSDT 0x00000000CD600DE8 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.026682] ACPI: SSDT 0x00000000CD601960 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20051117)
[    0.026684] ACPI: MCFG 0x00000000CD601B28 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.026686] ACPI: HPET 0x00000000CD601B68 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.026688] ACPI: SSDT 0x00000000CD601BA0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.026689] ACPI: SSDT 0x00000000CD601F10 005B5E (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.026691] ACPI: AAFT 0x00000000CD607A70 00031D (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.026693] ACPI: UEFI 0x00000000CD607D90 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.026695] ACPI: DMAR 0x00000000CD607DD8 0000B8 (v01 INTEL  BDW      00000001 INTL 00000001)
[    0.026702] ACPI: Local APIC address 0xfee00000
[    0.026771] No NUMA configuration found
[    0.026772] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[    0.026780] NODE_DATA(0) allocated [mem 0x21fdd2000-0x21fdfcfff]
[    0.026941] Zone ranges:
[    0.026941]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.026942]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.026943]   Normal   [mem 0x0000000100000000-0x000000021fdfffff]
[    0.026943]   Device   empty
[    0.026944] Movable zone start for each node
[    0.026946] Early memory node ranges
[    0.026947]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.026948]   node   0: [mem 0x0000000000100000-0x00000000b96abfff]
[    0.026949]   node   0: [mem 0x00000000b96b3000-0x00000000ba320fff]
[    0.026949]   node   0: [mem 0x00000000ba7f8000-0x00000000cd43cfff]
[    0.026949]   node   0: [mem 0x00000000cd4a4000-0x00000000cd4ebfff]
[    0.026950]   node   0: [mem 0x00000000cdfff000-0x00000000cdffffff]
[    0.026950]   node   0: [mem 0x0000000100000000-0x000000021fdfffff]
[    0.027040] Zeroed struct page in unavailable ranges: 12476 pages
[    0.027041] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[    0.027042] On node 0 totalpages: 2018628
[    0.027043]   DMA zone: 64 pages used for memmap
[    0.027043]   DMA zone: 21 pages reserved
[    0.027044]   DMA zone: 3996 pages, LIFO batch:0
[    0.027084]   DMA32 zone: 13055 pages used for memmap
[    0.027084]   DMA32 zone: 835496 pages, LIFO batch:63
[    0.035445]   Normal zone: 18424 pages used for memmap
[    0.035446]   Normal zone: 1179136 pages, LIFO batch:63
[    0.045857] Reserving Intel graphics memory at [mem 0xcf200000-0xdf1fffff]
[    0.045929] ACPI: PM-Timer IO Port: 0x1808
[    0.045930] ACPI: Local APIC address 0xfee00000
[    0.045935] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.045944] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.045946] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.045947] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.045948] ACPI: IRQ0 used by override.
[    0.045948] ACPI: IRQ9 used by override.
[    0.045950] Using ACPI (MADT) for SMP configuration information
[    0.045951] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.045954] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.045968] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.045970] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.045970] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.045970] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.045971] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.045972] PM: Registered nosave memory: [mem 0xb96ac000-0xb96b2fff]
[    0.045973] PM: Registered nosave memory: [mem 0xba321000-0xba7f7fff]
[    0.045974] PM: Registered nosave memory: [mem 0xcd43d000-0xcd4a3fff]
[    0.045975] PM: Registered nosave memory: [mem 0xcd4ec000-0xcd620fff]
[    0.045976] PM: Registered nosave memory: [mem 0xcd621000-0xcdffefff]
[    0.045977] PM: Registered nosave memory: [mem 0xce000000-0xceffffff]
[    0.045977] PM: Registered nosave memory: [mem 0xcf000000-0xdf1fffff]
[    0.045978] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[    0.045978] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.045979] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.045979] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.045979] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.045980] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.045980] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.045981] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.045981] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.045981] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.045982] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.045982] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.045983] [mem 0xdf200000-0xf7ffffff] available for PCI devices
[    0.045984] Booting paravirtualized kernel on bare hardware
[    0.045986] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.045991] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.046119] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.046123] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.046124] pcpu-alloc: [0] 0 1 2 3
[    0.046146] Built 1 zonelists, mobility grouping on.  Total pages: 1987064
[    0.046146] Policy zone: Normal
[    0.046147] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=ae4d4dfe-88d0-4a60-9c2e-645611ba0169 ro quiet splash vt.handoff=1
[    0.046535] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.046715] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.046750] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.049634] Calgary: detecting Calgary via BIOS EBDA area
[    0.049635] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.065829] Memory: 7770988K/8074512K available (14339K kernel code, 2370K rwdata, 4668K rodata, 2660K init, 5076K bss, 303524K reserved, 0K cma-reserved)
[    0.065929] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.065937] Kernel/User page tables isolation: enabled
[    0.065947] ftrace: allocating 42927 entries in 168 pages
[    0.078601] rcu: Hierarchical RCU implementation.
[    0.078602] rcu:    RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.078602]    Tasks RCU enabled.
[    0.078603] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.078604] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.081000] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.081202] random: crng done (trusting CPU's manufacturer)
[    0.081217] spurious 8259A interrupt: IRQ7.
[    0.081226] vt handoff: transparent VT on vt#1
[    0.081231] Console: colour dummy device 80x25
[    0.081234] printk: console [tty0] enabled
[    0.081246] ACPI: Core revision 20190703
[    0.081345] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.081355] APIC: Switch to symmetric I/O mode setup
[    0.081356] DMAR: Host address width 39
[    0.081357] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.081360] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[    0.081361] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.081363] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.081363] DMAR: RMRR base: 0x000000cdea5000 end: 0x000000cdeb3fff
[    0.081364] DMAR: RMRR base: 0x000000cf000000 end: 0x000000df1fffff
[    0.081365] DMAR-IR: IOAPIC id 8 under DRHD base  0xfed91000 IOMMU 1
[    0.081366] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.081366] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.081367] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.081708] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.081709] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.082092] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.101354] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2e061f5a407, max_idle_ns: 440795310819 ns
[    0.101357] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.81 BogoMIPS (lpj=12771636)
[    0.101359] pid_max: default: 32768 minimum: 301
[    0.101382] LSM: Security Framework initializing
[    0.101389] Yama: becoming mindful.
[    0.101410] AppArmor: AppArmor initialized
[    0.101444] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.101455] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.101568] *** VALIDATE proc ***
[    0.101601] *** VALIDATE cgroup1 ***
[    0.101602] *** VALIDATE cgroup2 ***
[    0.101639] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.101650] process: using mwait in idle threads
[    0.101652] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.101653] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.101655] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.101656] Spectre V2 : Mitigation: Full generic retpoline
[    0.101656] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.101656] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.101658] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.101658] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.101660] MDS: Mitigation: Clear CPU buffers
[    0.101793] Freeing SMP alternatives memory: 40K
[    0.103369] TSC deadline timer enabled
[    0.103371] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.103444] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.103457] ... version:                3
[    0.103457] ... bit width:              48
[    0.103458] ... generic registers:      8
[    0.103458] ... value mask:             0000ffffffffffff
[    0.103458] ... max period:             00007fffffffffff
[    0.103459] ... fixed-purpose events:   3
[    0.103459] ... event mask:             00000007000000ff
[    0.103484] rcu: Hierarchical SRCU implementation.
[    0.104185] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.104223] smp: Bringing up secondary CPUs ...
[    0.104287] x86: Booting SMP configuration:
[    0.104288] .... node  #0, CPUs:      #1 #2 #3
[    0.106854] smp: Brought up 1 node, 4 CPUs
[    0.106854] smpboot: Max logical packages: 1
[    0.106854] smpboot: Total of 4 processors activated (25543.27 BogoMIPS)
[    0.106854] devtmpfs: initialized
[    0.106854] x86/mm: Memory block size: 128MB
[    0.106854] PM: Registering ACPI NVS region [mem 0xb96ac000-0xb96b2fff] (28672 bytes)
[    0.106854] PM: Registering ACPI NVS region [mem 0xcd4ec000-0xcd620fff] (1265664 bytes)
[    0.106854] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.106854] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.106854] pinctrl core: initialized pinctrl subsystem
[    0.106854] PM: RTC time: 20:57:53, date: 2020-01-22
[    0.106854] NET: Registered protocol family 16
[    0.106854] audit: initializing netlink subsys (disabled)
[    0.106854] audit: type=2000 audit(1579726673.024:1): state=initialized audit_enabled=0 res=1
[    0.106854] EISA bus registered
[    0.106854] cpuidle: using governor ladder
[    0.106854] cpuidle: using governor menu
[    0.106854] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.106854] ACPI: bus type PCI registered
[    0.106854] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.106854] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.106854] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.106854] PCI: Using configuration type 1 for base access
[    0.109372] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.110555] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.110555] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.110555] ACPI: Added _OSI(Module Device)
[    0.110555] ACPI: Added _OSI(Processor Device)
[    0.110555] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.110555] ACPI: Added _OSI(Processor Aggregator Device)
[    0.110555] ACPI: Added _OSI(Linux-Dell-Video)
[    0.110555] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.110555] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.126575] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.129074] ACPI: Dynamic OEM Table Load:
[    0.129078] ACPI: SSDT 0xFFFF92875606C000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.129826] ACPI: Dynamic OEM Table Load:
[    0.129826] ACPI: SSDT 0xFFFF928756655800 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.130721] ACPI: Dynamic OEM Table Load:
[    0.130721] ACPI: SSDT 0xFFFF928756053A00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.131198] ACPI: Interpreter enabled
[    0.131224] ACPI: (supports S0 S3 S4 S5)
[    0.131225] ACPI: Using IOAPIC for interrupt routing
[    0.131295] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.132009] ACPI: Enabled 12 GPEs in block 00 to 3F
[    0.132653] ACPI: Power Resource [PG00] (on)
[    0.133655] ACPI: Power Resource [PG01] (on)
[    0.133795] ACPI: Power Resource [PG02] (on)
[    0.149176] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.149180] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.149534] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug LTR]
[    0.149858] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[    0.149859] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.150306] PCI host bridge to bus 0000:00
[    0.150307] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.150308] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.150309] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.150310] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.150310] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.150311] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.150312] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.150313] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.150313] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.150314] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[    0.150315] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.150322] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.150408] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[    0.150416] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[    0.150420] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.150423] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.150504] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[    0.150511] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
[    0.150613] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.150630] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[    0.150682] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.150755] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.150773] pci 0000:00:16.0: reg 0x10: [mem 0xf7d3e000-0xf7d3e00f 64bit]
[    0.150828] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.150924] pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
[    0.150940] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[    0.150946] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3c000-0xf7d3cfff]
[    0.150952] pci 0000:00:19.0: reg 0x18: [io  0xf080-0xf09f]
[    0.151003] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.151078] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.151096] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
[    0.151170] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.151246] pci 0000:00:1b.0: [8086:8ca0] type 00 class 0x040300
[    0.151263] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[    0.151323] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.151398] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.151467] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.151593] pci 0000:00:1c.6: [8086:244e] type 01 class 0x060401
[    0.151663] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[    0.151784] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.151803] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3a000-0xf7d3a3ff]
[    0.151877] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.151955] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.152118] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.152131] pci 0000:00:1f.2: reg 0x10: [io  0xf0d0-0xf0d7]
[    0.152136] pci 0000:00:1f.2: reg 0x14: [io  0xf0c0-0xf0c3]
[    0.152142] pci 0000:00:1f.2: reg 0x18: [io  0xf0b0-0xf0b7]
[    0.152147] pci 0000:00:1f.2: reg 0x1c: [io  0xf0a0-0xf0a3]
[    0.152153] pci 0000:00:1f.2: reg 0x20: [io  0xf060-0xf07f]
[    0.152158] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d39000-0xf7d397ff]
[    0.152189] pci 0000:00:1f.2: PME# supported from D3hot
[    0.152257] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.152272] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d38000-0xf7d380ff 64bit]
[    0.152288] pci 0000:00:1f.3: reg 0x20: [io  0xf040-0xf05f]
[    0.152414] acpiphp: Slot [1] registered
[    0.152417] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.152484] pci 0000:02:00.0: [1b21:1080] type 01 class 0x060401
[    0.152644] pci 0000:00:1c.6: PCI bridge to [bus 02-03] (subtractive decode)
[    0.152647] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.152649] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.152653] pci 0000:00:1c.6:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.152654] pci 0000:00:1c.6:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.152654] pci 0000:00:1c.6:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.152655] pci 0000:00:1c.6:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.152656] pci 0000:00:1c.6:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.152657] pci 0000:00:1c.6:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.152657] pci 0000:00:1c.6:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.152658] pci 0000:00:1c.6:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.152659] pci 0000:00:1c.6:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.152659] pci 0000:00:1c.6:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.152684] pci_bus 0000:03: extended config space not accessible
[    0.152708] pci 0000:03:00.0: [1106:3038] type 00 class 0x0c0300
[    0.152783] pci 0000:03:00.0: reg 0x20: [io  0xe020-0xe03f]
[    0.152858] pci 0000:03:00.0: supports D1 D2
[    0.152859] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot
[    0.152907] pci 0000:03:00.1: [1106:3038] type 00 class 0x0c0300
[    0.152989] pci 0000:03:00.1: reg 0x20: [io  0xe000-0xe01f]
[    0.153058] pci 0000:03:00.1: supports D1 D2
[    0.153059] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot
[    0.153105] pci 0000:03:00.2: [1106:3104] type 00 class 0x0c0320
[    0.153130] pci 0000:03:00.2: reg 0x10: [mem 0xf7c00000-0xf7c000ff]
[    0.153252] pci 0000:03:00.2: supports D1 D2
[    0.153253] pci 0000:03:00.2: PME# supported from D0 D1 D2 D3hot
[    0.153355] pci 0000:02:00.0: PCI bridge to [bus 03] (subtractive decode)
[    0.153362] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.153366] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.153373] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff] (subtractive decode)
[    0.153374] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff] (subtractive decode)
[    0.153374] pci 0000:02:00.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.153375] pci 0000:02:00.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.153376] pci 0000:02:00.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.153377] pci 0000:02:00.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[    0.153377] pci 0000:02:00.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[    0.153378] pci 0000:02:00.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[    0.153379] pci 0000:02:00.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[    0.153379] pci 0000:02:00.0:   bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[    0.153380] pci 0000:02:00.0:   bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[    0.153381] pci 0000:02:00.0:   bridge window [mem 0xdf200000-0xfeafffff window] (subtractive decode)
[    0.154329] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.154382] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.154435] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.154489] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.154541] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.154593] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.154645] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.154697] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.154872] SCSI subsystem initialized
[    0.154872] libata version 3.00 loaded.
[    0.154872] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.154872] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.154872] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.154872] vgaarb: loaded
[    0.154872] ACPI: bus type USB registered
[    0.154872] usbcore: registered new interface driver usbfs
[    0.154872] usbcore: registered new interface driver hub
[    0.154872] usbcore: registered new device driver usb
[    0.154872] pps_core: LinuxPPS API ver. 1 registered
[    0.154872] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.154872] PTP clock support registered
[    0.154872] EDAC MC: Ver: 3.0.0
[    0.154872] PCI: Using ACPI for IRQ routing
[    0.154872] PCI: pci_cache_line_size set to 64 bytes
[    0.154872] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.154872] e820: reserve RAM buffer [mem 0xb96ac000-0xbbffffff]
[    0.154872] e820: reserve RAM buffer [mem 0xba321000-0xbbffffff]
[    0.154872] e820: reserve RAM buffer [mem 0xcd43d000-0xcfffffff]
[    0.154872] e820: reserve RAM buffer [mem 0xcd4ec000-0xcfffffff]
[    0.154872] e820: reserve RAM buffer [mem 0xce000000-0xcfffffff]
[    0.154872] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[    0.154872] NetLabel: Initializing
[    0.154872] NetLabel:  domain hash size = 128
[    0.154872] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.154872] NetLabel:  unlabeled traffic allowed by default
[    0.154872] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.154872] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.158369] clocksource: Switched to clocksource tsc-early
[    0.166555] VFS: Disk quotas dquot_6.6.0
[    0.166566] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.166586] *** VALIDATE hugetlbfs ***
[    0.166645] AppArmor: AppArmor Filesystem Enabled
[    0.166665] pnp: PnP ACPI init
[    0.166788] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.166792] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.166885] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.166888] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.166903] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.166934] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.166936] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.167020] system 00:04: [io  0x0290-0x029f] has been reserved
[    0.167022] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.167230] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.167232] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.167385] pnp 00:06: [dma 0 disabled]
[    0.167418] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.167884] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.167885] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.167886] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.167887] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.167888] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.167889] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.167890] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.167891] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.167892] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.167893] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.167894] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[    0.167896] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.168080] pnp: PnP ACPI: found 8 devices
[    0.168966] thermal_sys: Registered thermal governor 'fair_share'
[    0.168967] thermal_sys: Registered thermal governor 'bang_bang'
[    0.168967] thermal_sys: Registered thermal governor 'step_wise'
[    0.168968] thermal_sys: Registered thermal governor 'user_space'
[    0.168968] thermal_sys: Registered thermal governor 'power_allocator'
[    0.173452] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.173477] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.173486] pci 0000:02:00.0: PCI bridge to [bus 03]
[    0.173488] pci 0000:02:00.0:   bridge window [io  0xe000-0xefff]
[    0.173494] pci 0000:02:00.0:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.173505] pci 0000:00:1c.6: PCI bridge to [bus 02-03]
[    0.173506] pci 0000:00:1c.6:   bridge window [io  0xe000-0xefff]
[    0.173509] pci 0000:00:1c.6:   bridge window [mem 0xf7c00000-0xf7cfffff]
[    0.173515] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.173516] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.173517] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.173517] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.173518] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.173519] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.173520] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.173520] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.173521] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.173522] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.173523] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.173523] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.173524] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[    0.173525] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[    0.173526] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.173526] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.173527] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.173528] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.173528] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.173529] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.173530] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.173530] pci_bus 0000:02: resource 13 [mem 0xdf200000-0xfeafffff window]
[    0.173531] pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
[    0.173532] pci_bus 0000:03: resource 1 [mem 0xf7c00000-0xf7cfffff]
[    0.173533] pci_bus 0000:03: resource 4 [io  0xe000-0xefff]
[    0.173533] pci_bus 0000:03: resource 5 [mem 0xf7c00000-0xf7cfffff]
[    0.173534] pci_bus 0000:03: resource 6 [io  0x0000-0x0cf7 window]
[    0.173535] pci_bus 0000:03: resource 7 [io  0x0d00-0xffff window]
[    0.173535] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.173536] pci_bus 0000:03: resource 9 [mem 0x000d0000-0x000d3fff window]
[    0.173537] pci_bus 0000:03: resource 10 [mem 0x000d4000-0x000d7fff window]
[    0.173537] pci_bus 0000:03: resource 11 [mem 0x000d8000-0x000dbfff window]
[    0.173538] pci_bus 0000:03: resource 12 [mem 0x000dc000-0x000dffff window]
[    0.173539] pci_bus 0000:03: resource 13 [mem 0x000e0000-0x000e3fff window]
[    0.173540] pci_bus 0000:03: resource 14 [mem 0x000e4000-0x000e7fff window]
[    0.173540] pci_bus 0000:03: resource 15 [mem 0xdf200000-0xfeafffff window]
[    0.173667] NET: Registered protocol family 2
[    0.173762] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.173796] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.173900] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.173982] TCP: Hash tables configured (established 65536 bind 65536)
[    0.174007] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.174025] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[    0.174080] NET: Registered protocol family 1
[    0.174083] NET: Registered protocol family 44
[    0.174090] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.197443] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6a0 took 22635 usecs
[    0.221436] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6a0 took 23421 usecs
[    0.221851] PCI: CLS 64 bytes, default 64
[    0.221879] Trying to unpack rootfs image as initramfs...
[    0.914696] Freeing initrd memory: 64124K
[    0.937401] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.937402] software IO TLB: mapped [mem 0xc6600000-0xca600000] (64MB)
[    0.937540] check: Scanning for low memory corruption every 60 seconds
[    0.938567] Initialise system trusted keyrings
[    0.938574] Key type blacklist registered
[    0.938596] workingset: timestamp_bits=36 max_order=21 bucket_order=0
[    0.939584] zbud: loaded
[    0.939846] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.939955] fuse: init (API version 7.31)
[    0.940028] Platform Keyring initialized
[    0.943676] Key type asymmetric registered
[    0.943677] Asymmetric key parser 'x509' registered
[    0.943684] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    0.943708] io scheduler mq-deadline registered
[    0.943940] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26
[    0.944025] pcieport 0000:00:1c.6: PME: Signaling with IRQ 27
[    0.944076] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.944116] vesafb: mode is 1920x1080x32, linelength=7680, pages=0
[    0.944116] vesafb: scrolling: redraw
[    0.944117] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.944128] vesafb: framebuffer at 0xe0000000, mapped to 0x0000000005ef0053, using 8128k, total 8128k
[    0.944153] fbcon: Deferring console take-over
[    0.944154] fb0: VESA VGA frame buffer device
[    0.944162] intel_idle: MWAIT substates: 0x42120
[    0.944162] intel_idle: v0.4.1 model 0x3C
[    0.944303] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.944407] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.944412] ACPI: Power Button [PWRB]
[    0.944435] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.944439] ACPI: Sleep Button [SLPB]
[    0.944457] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.944466] ACPI: Power Button [PWRF]
[    0.944852] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.965308] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.966503] Linux agpgart interface v0.103
[    0.967768] loop: module loaded
[    0.967890] libphy: Fixed MDIO Bus: probed
[    0.967891] tun: Universal TUN/TAP device driver, 1.6
[    0.967907] PPP generic driver version 2.4.2
[    0.967929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.967931] ehci-pci: EHCI PCI platform driver
[    0.968021] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.968026] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.968035] ehci-pci 0000:00:1a.0: debug port 2
[    0.971929] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.971938] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7d3b000
[    0.985396] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.985423] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    0.985424] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.985424] usb usb1: Product: EHCI Host Controller
[    0.985425] usb usb1: Manufacturer: Linux 5.3.0-26-generic ehci_hcd
[    0.985426] usb usb1: SerialNumber: 0000:00:1a.0
[    0.985576] hub 1-0:1.0: USB hub found
[    0.985580] hub 1-0:1.0: 2 ports detected
[    0.985757] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.985760] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.985768] ehci-pci 0000:00:1d.0: debug port 2
[    0.989656] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.989664] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7d3a000
[    1.005393] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.005421] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.005422] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.005423] usb usb2: Product: EHCI Host Controller
[    1.005424] usb usb2: Manufacturer: Linux 5.3.0-26-generic ehci_hcd
[    1.005425] usb usb2: SerialNumber: 0000:00:1d.0
[    1.005564] hub 2-0:1.0: USB hub found
[    1.005568] hub 2-0:1.0: 2 ports detected
[    1.005721] ehci-pci 0000:03:00.2: EHCI Host Controller
[    1.005723] ehci-pci 0000:03:00.2: new USB bus registered, assigned bus number 3
[    1.005765] ehci-pci 0000:03:00.2: irq 16, io mem 0xf7c00000
[    1.021394] ehci-pci 0000:03:00.2: USB 2.0 started, EHCI 1.00
[    1.021420] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.021421] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.021421] usb usb3: Product: EHCI Host Controller
[    1.021422] usb usb3: Manufacturer: Linux 5.3.0-26-generic ehci_hcd
[    1.021423] usb usb3: SerialNumber: 0000:03:00.2
[    1.021560] hub 3-0:1.0: USB hub found
[    1.021564] hub 3-0:1.0: 4 ports detected
[    1.021644] ehci-platform: EHCI generic platform driver
[    1.021649] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.021652] ohci-pci: OHCI PCI platform driver
[    1.021657] ohci-platform: OHCI generic platform driver
[    1.021661] uhci_hcd: USB Universal Host Controller Interface driver
[    1.021726] uhci_hcd 0000:03:00.0: UHCI Host Controller
[    1.021729] uhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[    1.021735] uhci_hcd 0000:03:00.0: detected 2 ports
[    1.021764] uhci_hcd 0000:03:00.0: irq 18, io base 0x0000e020
[    1.021798] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    1.021798] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.021799] usb usb4: Product: UHCI Host Controller
[    1.021800] usb usb4: Manufacturer: Linux 5.3.0-26-generic uhci_hcd
[    1.021800] usb usb4: SerialNumber: 0000:03:00.0
[    1.021934] hub 4-0:1.0: USB hub found
[    1.021938] hub 4-0:1.0: 2 ports detected
[    1.022061] uhci_hcd 0000:03:00.1: UHCI Host Controller
[    1.022065] uhci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 5
[    1.022072] uhci_hcd 0000:03:00.1: detected 2 ports
[    1.022100] uhci_hcd 0000:03:00.1: irq 19, io base 0x0000e000
[    1.022134] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
[    1.022135] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.022135] usb usb5: Product: UHCI Host Controller
[    1.022136] usb usb5: Manufacturer: Linux 5.3.0-26-generic uhci_hcd
[    1.022137] usb usb5: SerialNumber: 0000:03:00.1
[    1.022269] hub 5-0:1.0: USB hub found
[    1.022273] hub 5-0:1.0: 2 ports detected
[    1.022423] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.022426] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 6
[    1.023468] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810
[    1.023471] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.023579] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
[    1.023580] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.023580] usb usb6: Product: xHCI Host Controller
[    1.023581] usb usb6: Manufacturer: Linux 5.3.0-26-generic xhci-hcd
[    1.023582] usb usb6: SerialNumber: 0000:00:14.0
[    1.023722] hub 6-0:1.0: USB hub found
[    1.023736] hub 6-0:1.0: 14 ports detected
[    1.026619] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.026621] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 7
[    1.026623] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.026648] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
[    1.026648] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.026649] usb usb7: Product: xHCI Host Controller
[    1.026650] usb usb7: Manufacturer: Linux 5.3.0-26-generic xhci-hcd
[    1.026650] usb usb7: SerialNumber: 0000:00:14.0
[    1.026789] hub 7-0:1.0: USB hub found
[    1.026799] hub 7-0:1.0: 6 ports detected
[    1.028370] i8042: PNP: No PS/2 controller found.
[    1.028443] mousedev: PS/2 mouse device common for all mice
[    1.028573] rtc_cmos 00:02: RTC can wake from S4
[    1.028702] rtc_cmos 00:02: registered as rtc0
[    1.028713] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.028717] i2c /dev entries driver
[    1.028741] device-mapper: uevent: version 1.0.3
[    1.028787] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    1.028800] platform eisa.0: Probing EISA bus 0
[    1.028801] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.028802] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.028802] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.028803] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.028804] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.028804] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.028805] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.028805] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.028806] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.028807] platform eisa.0: EISA: Detected 0 cards
[    1.028810] intel_pstate: Intel P-state driver initializing
[    1.029045] ledtrig-cpu: registered to indicate activity on CPUs
[    1.029218] NET: Registered protocol family 10
[    1.033474] Segment Routing with IPv6
[    1.033499] NET: Registered protocol family 17
[    1.033593] Key type dns_resolver registered
[    1.033821] RAS: Correctable Errors collector initialized.
[    1.033838] microcode: sig=0x306c3, pf=0x2, revision=0x27
[    1.033926] microcode: Microcode Update Driver: v2.2.
[    1.033932] sched_clock: Marking stable (1033740058, 184425)->(1038878583, -4954100)
[    1.034046] registered taskstats version 1
[    1.034054] Loading compiled-in X.509 certificates
[    1.035358] Loaded X.509 cert 'Build time autogenerated kernel key: 8098f9b3401d48cb244b138af0c5bac131caef8a'
[    1.035373] zswap: loaded using pool lzo/zbud
[    1.039308] Key type big_key registered
[    1.041179] Key type encrypted registered
[    1.041182] AppArmor: AppArmor sha1 policy hashing enabled
[    1.041185] ima: No TPM chip found, activating TPM-bypass!
[    1.041187] ima: Allocated hash algorithm: sha1
[    1.041191] No architecture policies found
[    1.041196] evm: Initialising EVM extended attributes:
[    1.041197] evm: security.selinux
[    1.041197] evm: security.SMACK64
[    1.041197] evm: security.SMACK64EXEC
[    1.041198] evm: security.SMACK64TRANSMUTE
[    1.041198] evm: security.SMACK64MMAP
[    1.041198] evm: security.apparmor
[    1.041198] evm: security.ima
[    1.041199] evm: security.capability
[    1.041199] evm: HMAC attrs: 0x1
[    1.041623] PM:   Magic number: 4:188:1004
[    1.041641] input input1: hash matches
[    1.041651] serial 00:06: hash matches
[    1.041677] memory memory43: hash matches
[    1.041727] rtc_cmos 00:02: setting system clock to 2020-01-22T20:57:53 UTC (1579726673)
[    1.042634] Freeing unused decrypted memory: 2040K
[    1.042951] Freeing unused kernel image memory: 2660K
[    1.065393] Write protecting the kernel read-only data: 22528k
[    1.065783] Freeing unused kernel image memory: 2008K
[    1.065974] Freeing unused kernel image memory: 1476K
[    1.072973] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.072974] x86/mm: Checking user space page tables
[    1.079832] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.079833] Run /init as init process
[    1.153930] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.153930] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.154094] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.156850] ahci 0000:00:1f.2: version 3.0
[    1.156983] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x2a impl SATA mode
[    1.156985] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.182527] scsi host0: ahci
[    1.182627] scsi host1: ahci
[    1.182749] scsi host2: ahci
[    1.188134] scsi host3: ahci
[    1.188211] scsi host4: ahci
[    1.189430] scsi host5: ahci
[    1.189493] ata1: DUMMY
[    1.189495] ata2: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39180 irq 30
[    1.189495] ata3: DUMMY
[    1.189496] ata4: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39280 irq 30
[    1.189497] ata5: DUMMY
[    1.189498] ata6: SATA max UDMA/133 abar m2048@0xf7d39000 port 0xf7d39380 irq 30
[    1.204566] checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
[    1.204567] fb0: switching to inteldrmfb from VESA VGA
[    1.204640] i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.212260] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.212260] [drm] Driver supports precise vblank timestamp query.
[    1.212584] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.222434] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[    1.224862] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.225102] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    1.226719] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    1.265163] fbcon: i915drmfb (fb0) is primary device
[    1.265163] fbcon: Deferring console take-over
[    1.265164] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[    1.295275] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) d0:50:99:4b:7a:b7
[    1.295276] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.295302] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[    1.302267] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.305394] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.329388] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    1.361393] usb 6-2: new full-speed USB device number 2 using xhci_hcd
[    1.465707] usb 1-1: New USB device found, idVendor=8087, idProduct=8009, bcdDevice= 0.00
[    1.465708] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.465946] hub 1-1:1.0: USB hub found
[    1.466062] hub 1-1:1.0: 6 ports detected
[    1.485715] usb 2-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.00
[    1.485716] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.485959] hub 2-1:1.0: USB hub found
[    1.486051] hub 2-1:1.0: 8 ports detected
[    1.503997] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.505921] ata2.00: supports DRM functions and may not be fully accessible
[    1.506952] ata2.00: ATA-11: Samsung SSD 860 EVO 250GB, RVT01B6Q, max UDMA/133
[    1.506953] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    1.509570] ata2.00: supports DRM functions and may not be fully accessible
[    1.512066] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.512172] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.512559] ata2.00: configured for UDMA/133
[    1.512730] scsi 1:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    1.512755] ata4.00: ATA-9: WDC WD10EZEX-00BN5A0, 01.01A01, max UDMA/133
[    1.512756] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    1.513006] ata2.00: Enabling discard_zeroes_data
[    1.513006] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.513132] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[    1.513143] sd 1:0:0:0: [sda] Write Protect is off
[    1.513145] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.513156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.513248] ata2.00: Enabling discard_zeroes_data
[    1.513426] ata4.00: configured for UDMA/133
[    1.513527] scsi 3:0:0:0: Direct-Access     ATA      WDC WD10EZEX-00B 1A01 PQ: 0 ANSI: 5
[    1.513558]  sda: sda1 sda2 sda3
[    1.513663] sd 3:0:0:0: Attached scsi generic sg1 type 0
[    1.513675] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    1.513677] sd 3:0:0:0: [sdb] 4096-byte physical blocks
[    1.513682] sd 3:0:0:0: [sdb] Write Protect is off
[    1.513683] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.513698] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.513795] ata2.00: Enabling discard_zeroes_data
[    1.514944] sd 1:0:0:0: [sda] supports TCG Opal
[    1.514945] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.515996] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.516007] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.516008] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.516319] ata6.00: ATAPI: ATAPI   iHAS124   E, 4L04, max UDMA/100
[    1.517781] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    1.517783] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    1.517793] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    1.518100] ata6.00: configured for UDMA/100
[    1.519814] scsi 5:0:0:0: CD-ROM            ATAPI    iHAS124   E      4L04 PQ: 0 ANSI: 5
[    1.531403]  sdb: sdb1
[    1.531654] sd 3:0:0:0: [sdb] Attached SCSI disk
[    1.549394] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[    1.582551] sr 5:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.582552] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.582734] sr 5:0:0:0: Attached scsi CD-ROM sr0
[    1.582874] sr 5:0:0:0: Attached scsi generic sg2 type 5
[    1.736454] usb 4-1: New USB device found, idVendor=056a, idProduct=0302, bcdDevice= 1.00
[    1.736455] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.736456] usb 4-1: Product: Intuos PTS
[    1.736457] usb 4-1: Manufacturer: Wacom Co.,Ltd.
[    1.741205] hidraw: raw HID events driver (C) Jiri Kosina
[    1.750532] usbcore: registered new interface driver usbhid
[    1.750533] usbhid: USB HID core driver
[    1.752315] hid-generic 0003:056A:0302.0001: hiddev0,hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input0
[    1.752463] hid-generic 0003:056A:0302.0002: hiddev1,hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input1
[    1.752538] input: Wacom Co.,Ltd. Intuos PTS as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.2/0003:056A:0302.0003/input/input4
[    1.752658] hid-generic 0003:056A:0302.0003: input,hidraw2: USB HID v1.10 Mouse [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input2
[    1.754496] input: Wacom Intuos PT S Pen as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.0/0003:056A:0302.0001/input/input5
[    1.754547] wacom 0003:056A:0302.0001: hidraw0: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input0
[    1.754650] input: Wacom Intuos PT S Finger as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.1/0003:056A:0302.0002/input/input9
[    1.754694] input: Wacom Intuos PT S Pad as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-1/4-1:1.1/0003:056A:0302.0002/input/input10
[    1.754741] wacom 0003:056A:0302.0002: hidraw1: USB HID v1.10 Device [Wacom Co.,Ltd. Intuos PTS] on usb-0000:03:00.0-1/input1
[    1.969376] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[    1.969390] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[    1.969415] clocksource: Switched to clocksource tsc
[    2.008675] usb 6-2: New USB device found, idVendor=1b3f, idProduct=2008, bcdDevice= 1.00
[    2.008676] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.008687] usb 6-2: Product: USB Audio Device
[    2.008688] usb 6-2: Manufacturer: GeneralPlus
[    2.009876] input: GeneralPlus USB Audio Device as /devices/pci0000:00/0000:00:14.0/usb6/6-2/6-2:1.3/0003:1B3F:2008.0004/input/input11
[    2.073593] hid-generic 0003:1B3F:2008.0004: input,hidraw2: USB HID v2.01 Device [GeneralPlus USB Audio Device] on usb-0000:00:14.0-2/input3
[    2.201390] usb 6-4: new high-speed USB device number 3 using xhci_hcd
[    2.493391] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[    2.689534] usb 4-2: New USB device found, idVendor=045e, idProduct=07b9, bcdDevice= 1.14
[    2.689535] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.689536] usb 4-2: Product: USB Keyboard
[    2.689536] usb 4-2: Manufacturer: LITEON Technology
[    2.723665] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:1c.6/0000:02:00.0/0000:03:00.0/usb4/4-2/4-2:1.0/0003:045E:07B9.0005/input/input12
[    2.781582] hid-generic 0003:045E:07B9.0005: input,hidraw3: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:03:00.0-2/input0
[    4.580157] usb 6-4: New USB device found, idVendor=046d, idProduct=082d, bcdDevice= 0.11
[    4.580168] usb 6-4: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[    4.580169] usb 6-4: Product: HD Pro Webcam C920
[    4.580169] usb 6-4: SerialNumber: CBD3F97F
[    4.705391] usb 6-13: new low-speed USB device number 4 using xhci_hcd
[    4.857039] usb 6-13: New USB device found, idVendor=046d, idProduct=c077, bcdDevice=72.00
[    4.857050] usb 6-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.857051] usb 6-13: Product: USB Optical Mouse
[    4.857051] usb 6-13: Manufacturer: Logitech
[    4.859186] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb6/6-13/6-13:1.0/0003:046D:C077.0006/input/input13
[    4.859465] hid-generic 0003:046D:C077.0006: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:14.0-13/input0
[    5.065453] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    5.170542] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[    5.189498] systemd[1]: Detected architecture x86-64.
[    5.190600] systemd[1]: Set hostname to <bob-desktop>.
[    5.271581] systemd[1]: Reached target Remote File Systems.
[    5.271659] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.271781] systemd[1]: Created slice System Slice.
[    5.271872] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    5.271909] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    5.271954] systemd[1]: Listening on Journal Socket (/dev/log).
[    5.272005] systemd[1]: Listening on Journal Socket.
[    5.280813] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[    5.285586] lp: driver loaded but no devices found
[    5.291973] ppdev: user-space parallel port driver
[    5.343071] systemd-journald[452]: Received request to flush runtime journal from PID 1
[    5.553039] ACPI Warning: SystemIO range 0x0000000000001828-0x000000000000182F conflicts with OpRegion 0x0000000000001800-0x000000000000187F (\PMIO) (20190703/utaddress-213)
[    5.553043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.553045] ACPI Warning: SystemIO range 0x0000000000001C40-0x0000000000001C4F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)
[    5.553047] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.553048] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190703/utaddress-213)
[    5.553049] ACPI Warning: SystemIO range 0x0000000000001C30-0x0000000000001C3F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)
[    5.553051] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.553052] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001C3F (\GPRL) (20190703/utaddress-213)
[    5.553053] ACPI Warning: SystemIO range 0x0000000000001C00-0x0000000000001C2F conflicts with OpRegion 0x0000000000001C00-0x0000000000001FFF (\GPR) (20190703/utaddress-213)
[    5.553055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    5.553055] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    5.714333] mc: Linux media interface: v0.10
[    5.717363] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.720485] videodev: Linux video capture interface: v2.00
[    5.764587] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[    5.764618] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[    5.764645] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[    5.764671] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    5.764698] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    5.798753] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[    5.798764] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    5.798765] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    5.798766] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    5.798766] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[    5.798767] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    5.798768] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[    5.798769] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[    5.798769] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[    5.811669] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[    5.811699] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[    5.811726] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[    5.811754] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input22
[    5.811779] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[    5.811807] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[    5.811831] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input25
[    5.811860] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input26
[    5.853653] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    5.853654] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    5.853655] RAPL PMU: hw unit of domain package 2^-14 Joules
[    5.853655] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    5.853655] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    5.861750] cryptd: max_cpu_qlen set to 1000
[    5.870143] AVX2 version of gcm_enc/dec engaged.
[    5.870144] AES CTR mode by8 optimization enabled
[    5.917413] usbcore: registered new interface driver snd-usb-audio
[    5.918538] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
[    5.920639] uvcvideo 6-4:1.0: Entity type for entity Processing 3 was not initialized!
[    5.920640] uvcvideo 6-4:1.0: Entity type for entity Extension 6 was not initialized!
[    5.920641] uvcvideo 6-4:1.0: Entity type for entity Extension 12 was not initialized!
[    5.920642] uvcvideo 6-4:1.0: Entity type for entity Camera 1 was not initialized!
[    5.920643] uvcvideo 6-4:1.0: Entity type for entity Extension 8 was not initialized!
[    5.920643] uvcvideo 6-4:1.0: Entity type for entity Extension 9 was not initialized!
[    5.920644] uvcvideo 6-4:1.0: Entity type for entity Extension 10 was not initialized!
[    5.920645] uvcvideo 6-4:1.0: Entity type for entity Extension 11 was not initialized!
[    5.920685] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb6/6-4/6-4:1.0/input/input27
[    5.920728] usbcore: registered new interface driver uvcvideo
[    5.920728] USB Video Class driver (1.1.1)
[    5.965602] Adding 3383292k swap on /dev/sda3.  Priority:-2 extents:1 across:3383292k SSFS
[    6.058256] intel_rapl_common: Found RAPL domain package
[    6.058258] intel_rapl_common: Found RAPL domain core
[    6.058258] intel_rapl_common: Found RAPL domain uncore
[    6.058259] intel_rapl_common: Found RAPL domain dram
[    6.115956] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    6.131534] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    6.181425] audit: type=1400 audit(1579726678.635:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1011 comm="apparmor_parser"
[    6.182731] audit: type=1400 audit(1579726678.635:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1007 comm="apparmor_parser"
[    6.182732] audit: type=1400 audit(1579726678.635:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1007 comm="apparmor_parser"
[    6.182734] audit: type=1400 audit(1579726678.635:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1007 comm="apparmor_parser"
[    6.182735] audit: type=1400 audit(1579726678.635:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1007 comm="apparmor_parser"
[    6.182777] audit: type=1400 audit(1579726678.635:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1010 comm="apparmor_parser"
[    6.182778] audit: type=1400 audit(1579726678.635:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1010 comm="apparmor_parser"
[    6.182779] audit: type=1400 audit(1579726678.635:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1010 comm="apparmor_parser"
[    6.183368] audit: type=1400 audit(1579726678.635:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1013 comm="apparmor_parser"
[    6.183731] audit: type=1400 audit(1579726678.635:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1015 comm="apparmor_parser"
[    6.415467] vboxdrv: loading out-of-tree module taints kernel.
[    6.415639] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    6.420097] vboxdrv: Found 4 processor cores
[    6.441649] vboxdrv: TSC mode is Invariant, tentative frequency 3192596872 Hz
[    6.441650] vboxdrv: Successfully loaded version 6.1.2 (interface 0x002d0001)
[    6.644635] VBoxNetFlt: Successfully started.
[    6.645738] VBoxNetAdp: Successfully started.
[   10.675614] e1000e: enp0s25 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[   10.675643] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready
[   25.805678] usb 6-4: reset high-speed USB device number 3 using xhci_hcd
[   27.472986] rfkill: input handler disabled


Βλέπεις τίποτα άλλο;
Γνώσεις Linux: Μαθαίνω ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό


bobptz
seniorTUX
seniorTUX
 
Δημοσιεύσεις: 659
Εγγραφή: 28 Δεκ 2012, 02:39
Εκτύπωση

ΠροηγούμενηΕπόμενο

  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Λειτουργικό Σύστημα

cron