αργει μετα απο συνδεση hdd

[qsd330]

καλημερα και παλι.....

χτες συνδεσα εναν ακομα σκληρο δισκο sata το pcακι...
παρατηρησα ομως οτι καθηστερει το μηχανιμα απο τοτε..... αργει στην εκκινηση ,να φωρτωσει προγραμματα ...στο system monitor δεν βλεπω κατι που να καταναλωνει cpu ή μνημη...

τι νομιζετε οτι ειναι???

[Muttley Black]

Χωρίς να είμαι απόλυτα σίγουρος ότι αυτή θα είναι η λύση, αλλά δοκίμασες το πιο βασικό; Να μπεις στο bios να δεις μετά την εγκατάσταση του νέου δίσκου ποιον δίσκο έχεις boot priority. Αν όχι μπες στο bios και τσέκαρε ότι boot priority είναι ο δικός που έχεις το λειτουργικό σύστημα.

[Learner]

Στον καινούριο δίσκο που σύνδεσες, τρέξε αυτό και δώσε τα αποτελέσματα. Επίσης και η dmesg ίσως μας βοηθήσει. Τρέχεις dmesg στο τερματικό και παραθέτεις όλα τα αποτελέσματα εδώ.

[qsd330]

ο δισκος στανταρ δεν εχει προβλημα ...
οσον αφορα το bios ο καθενας φοραει διαφορετικο λειτουργικο οποτε θα το καταλαβαινα αμεσα

το smart το εχω απενεργοποιημενο... δεν θυμαμε το γιατι το ειχα απενεργοποιησει πλεον βεβαια

το dmesg δινει τα παρακατω αλλα υπαρχουν και πληροφοριες που δεν τις εμφανιζει γιατι ειναι πολλεσ σελιδες

Spoiler: show

Κώδικας: Επιλογή όλων

[ 0.849903] Loaded X.509 cert 'Magrathea: Glacier signing key: 5e868026e3f492f8528b2aba5b00cab093547813'
[ 0.849919] registered taskstats version 1
[ 0.853641] Key type trusted registered
[ 0.857034] Key type encrypted registered
[ 0.860460] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.860466] IMA: No TPM chip found, activating TPM-bypass!
[ 0.860819] Magic number: 6:431:881
[ 0.860971] rtc_cmos 00:03: setting system clock to 2014-03-14 10:53:24 UTC (1394794404)
[ 0.861166] powernow-k8: fid 0xe (2200 MHz), vid 0xa
[ 0.861168] powernow-k8: fid 0xc (2000 MHz), vid 0xc
[ 0.861170] powernow-k8: fid 0xa (1800 MHz), vid 0xe
[ 0.861171] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 0.861202] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2 cpu cores) (version 2.20.00)
[ 0.861207] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.861209] EDD information not available.
[ 0.861248] PM: Hibernation image not present or could not be loaded.
[ 0.863144] Freeing unused kernel memory: 1348K (ffffffff81d1c000 - ffffffff81e6d000)
[ 0.863149] Write protecting the kernel read-only data: 12288k
[ 0.865514] Freeing unused kernel memory: 636K (ffff880001761000 - ffff880001800000)
[ 0.867480] Freeing unused kernel memory: 572K (ffff880001b71000 - ffff880001c00000)
[ 0.887960] systemd-udevd[98]: starting version 204
[ 0.916473] pata_amd 0000:00:0d.0: version 0.4.1
[ 0.923601] scsi0 : pata_amd
[ 0.924918] scsi1 : pata_amd
[ 0.925003] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.925006] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.925261] sata_nv 0000:00:0e.0: version 3.5
[ 0.925566] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.925590] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 0.926104] scsi2 : sata_nv
[ 0.926188] scsi3 : sata_nv
[ 0.926235] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21
[ 0.926239] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21
[ 1.097650] ata1.01: HPA detected: current 78163247, native 78165360
[ 1.097658] ata1.01: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
[ 1.097661] ata1.01: 78163247 sectors, multi 16: LBA
[ 1.097669] ata1: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc60000) ACPI=0x3f01f (600:20:0x1c)
[ 1.100066] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.113573] ata1.01: configured for UDMA/100
[ 1.113793] scsi 0:0:1:0: Direct-Access ATA WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
[ 1.114063] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 1.114103] sd 0:0:1:0: [sda] 78163247 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.114209] ata2: port disabled--ignoring
[ 1.114261] sd 0:0:1:0: [sda] Write Protect is off
[ 1.114264] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.114341] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.159012] sda: sda1 sda2 < sda5 >
[ 1.159511] sd 0:0:1:0: [sda] Attached SCSI disk
[ 1.248857] usb 1-1: New USB device found, idVendor=0cf3, idProduct=1006
[ 1.248860] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 1.248862] usb 1-1: Product: USB2.0 WLAN
[ 1.248865] usb 1-1: Manufacturer: ATHEROS
[ 1.248867] usb 1-1: SerialNumber: 12345
[ 1.392103] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.439855] ata3.00: HPA detected: current 976771055, native 976773168
[ 1.439860] ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 1.439863] ata3.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.472052] usb 1-4: new high-speed USB device number 5 using ehci-pci
[ 1.506489] ata3.00: configured for UDMA/133
[ 1.506685] scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 1.506933] sd 2:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 1.506936] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.507045] sd 2:0:0:0: [sdb] Write Protect is off
[ 1.507048] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.507112] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.561357] sdb: sdb1 < sdb5 > sdb2
[ 1.561850] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 1.621364] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[ 1.621367] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.621370] usb 1-4: Product: 802.11 n WLAN
[ 1.621372] usb 1-4: Manufacturer: Ralink
[ 1.621374] usb 1-4: SerialNumber: 1.0
[ 1.972068] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.019741] ata4.00: HPA detected: current 625140335, native 625142448
[ 2.019746] ata4.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 2.019749] ata4.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.052052] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 2.086376] ata4.00: configured for UDMA/133
[ 2.086587] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 2.086801] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.086916] sd 3:0:0:0: [sdc] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 2.087118] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.087121] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.087204] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.139261] sdc: sdc1 sdc2 < sdc5 >
[ 2.139750] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.265092] usb 2-2: New USB device found, idVendor=177f, idProduct=0610
[ 2.265098] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.265101] usb 2-2: Product: Wireless Laser Mouse
[ 2.265103] usb 2-2: Manufacturer: Sweex
[ 2.272124] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.281510] usbcore: registered new interface driver usbhid
[ 2.281515] usbhid: USB HID core driver
[ 2.284414] input: Sweex Wireless Laser Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input4
[ 2.284548] hid-generic 0003:177F:0610.0001: input,hidraw0: USB HID v1.10 Mouse [Sweex Wireless Laser Mouse] on usb-0000:00:0b.0-2/input0
[ 2.444068] usb 2-3: new low-speed USB device number 3 using ohci-pci
[ 2.444516] random: nonblocking pool is initialized
[ 2.660089] usb 2-3: New USB device found, idVendor=046d, idProduct=c505
[ 2.660095] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.660098] usb 2-3: Product: USB Receiver
[ 2.660100] usb 2-3: Manufacturer: Logitech
[ 2.667851] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.671683] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input5
[ 2.671902] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-3/input0
[ 2.683209] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input6
[ 2.683433] hid-generic 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-3/input1
[ 4.841032] init: ureadahead main process (160) terminated with status 5
[ 6.374334] Adding 3143676k swap on /dev/sda5. Priority:-1 extents:1 across:3143676k FS
[ 8.330679] systemd-udevd[282]: starting version 204
[ 10.001227] lp: driver loaded but no devices found
[ 10.135645] Linux video capture interface: v2.00
[ 10.261346] v4l2loopback_dc: module verification failed: signature and/or required key missing - tainting kernel
[ 10.261692] v4l2loopback driver version 0.6.1-droidcam loaded
[ 10.863172] cfg80211: Calling CRDA to update world regulatory domain
[ 11.169671] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 11.332297] usb 1-4: reset high-speed USB device number 5 using ehci-pci
[ 11.474487] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 11.502734] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 11.605696] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.606103] usbcore: registered new interface driver rt2800usb
[ 12.450110] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 12.450146] i2c i2c-1: nForce2 SMBus adapter at 0x1c80
[ 12.577550] MCE: In-kernel MCE decoding enabled.
[ 12.580877] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 12.691141] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 12.691280] nv_tco: Watchdog reboot not detected
[ 12.691363] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 12.807854] EDAC MC: Ver: 3.0.0
[ 12.984281] AMD64 EDAC driver v3.4.0
[ 12.984338] EDAC amd64: DRAM ECC disabled.
[ 12.984343] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 12.984343] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 12.984343] (Note that use of the override may cause unknown side effects.)
[ 13.701797] [drm] Initialized drm 1.1.0 20060810
[ 13.919594] microcode: AMD CPU family 0xf not supported
[ 13.924555] microcode: AMD CPU family 0xf not supported
[ 14.587100] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[ 14.587210] usbcore: registered new interface driver ath9k_htc
[ 15.134549] kvm: disabled by bios
[ 15.145424] kvm: disabled by bios
[ 15.346596] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 15.346618] hda_intel: Disabling MSI
[ 15.346664] hda-intel 0000:00:10.1: Disabling 64bit DMA
[ 15.351108] hda-intel 0000:00:10.1: Enable delay in RIRB handling
[ 16.096056] SKU: Nid=0x0 sku_cfg=0x0000e601
[ 16.096061] SKU: port_connectivity=0x0
[ 16.096063] SKU: enable_pcbeep=0x1
[ 16.096064] SKU: check_sum=0x00000000
[ 16.096066] SKU: customization=0x00000000
[ 16.096067] SKU: external_amp=0x0
[ 16.096069] SKU: platform_type=0x0
[ 16.096070] SKU: swap=0x0
[ 16.096071] SKU: override=0x1
[ 16.184040] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 16.184045] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 16.184048] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 16.184049] mono: mono_out=0x0
[ 16.184051] dig-out=0x1e/0x0
[ 16.184052] inputs:
[ 16.184054] Rear Mic=0x18
[ 16.184056] Front Mic=0x19
[ 16.184058] Line=0x1a
[ 16.184059] CD=0x1c
[ 16.184061] dig-in=0x1f
[ 16.184063] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0883
[ 16.360332] [drm] radeon kernel modesetting enabled.
[ 16.360784] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 16.362921] [drm] initializing kernel modesetting (RV610 0x1002:0x94C3 0x1043:0x01C2).
[ 16.362943] [drm] register mmio base: 0xF3000000
[ 16.362945] [drm] register mmio size: 65536
[ 16.363293] ATOM BIOS: 94C3.10.56.00.05.AS05
[ 16.363318] radeon 0000:02:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 16.363322] radeon 0000:02:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 16.363324] [drm] Detected VRAM RAM=256M, BAR=256M
[ 16.363326] [drm] RAM width 64bits DDR
[ 16.363448] [TTM] Zone kernel: Available graphics memory: 1540918 kiB
[ 16.363450] [TTM] Initializing pool allocator
[ 16.363456] [TTM] Initializing DMA pool allocator
[ 16.363483] [drm] radeon: 256M of VRAM memory ready
[ 16.363485] [drm] radeon: 512M of GTT memory ready.
[ 16.363505] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 16.387610] [drm] Loading RV610 Microcode
[ 16.429369] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 16.665986] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 16.898860] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[ 16.898866] ath: EEPROM regdomain: 0x809c
[ 16.898868] ath: EEPROM indicates we should expect a country code
[ 16.898871] ath: doing EEPROM country->regdmn map search
[ 16.898872] ath: country maps to regdmn code: 0x52
[ 16.898874] ath: Country alpha2 being used: CN
[ 16.898875] ath: Regpair used: 0x52
[ 16.902979] ieee80211 phy1: Atheros AR9271 Rev:1
[ 16.984657] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 16.984713] radeon 0000:02:00.0: WB enabled
[ 16.984717] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff880036850c00
[ 16.984721] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff880036850c0c
[ 16.984724] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 16.984726] [drm] Driver supports precise vblank timestamp query.
[ 16.984756] radeon 0000:02:00.0: irq 41 for MSI/MSI-X
[ 16.984773] radeon 0000:02:00.0: radeon: using MSI.
[ 16.984803] [drm] radeon: irq initialized.
[ 17.016031] [drm] ring test on 0 succeeded in 0 usecs
[ 17.016090] [drm] ring test on 3 succeeded in 1 usecs
[ 17.016224] [drm] Enabling audio 0 support
[ 17.016244] [drm] ib test on ring 0 succeeded in 0 usecs
[ 17.016261] [drm] ib test on ring 3 succeeded in 0 usecs
[ 17.020711] [drm] Radeon Display Connectors
[ 17.020714] [drm] Connector 0:
[ 17.020716] [drm] DIN-1
[ 17.020718] [drm] Encoders:
[ 17.020720] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 17.020721] [drm] Connector 1:
[ 17.020723] [drm] VGA-1
[ 17.020725] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 17.020727] [drm] Encoders:
[ 17.020729] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 17.020730] [drm] Connector 2:
[ 17.020732] [drm] DVI-I-1
[ 17.020733] [drm] HPD1
[ 17.020736] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 17.020737] [drm] Encoders:
[ 17.020739] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 17.020741] [drm] DFP1: INTERNAL_LVTM1
[ 17.021141] [drm] Internal thermal controller with fan control
[ 17.021194] == power state 0 ==
[ 17.021196] ui class: none
[ 17.021198] internal class: boot
[ 17.021201] caps: video
[ 17.021203] uvd vclk: 0 dclk: 0
[ 17.021205] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021207] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021208] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021210] status: c r b
[ 17.021212] == power state 1 ==
[ 17.021213] ui class: performance
[ 17.021215] internal class: ovrdrv
[ 17.021217] caps: video
[ 17.021219] uvd vclk: 0 dclk: 0
[ 17.021221] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021222] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021224] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021225] status:
[ 17.021227] == power state 2 ==
[ 17.021228] ui class: performance
[ 17.021229] internal class: none
[ 17.021231] caps: video
[ 17.021233] uvd vclk: 0 dclk: 0
[ 17.021235] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021236] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021238] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021239] status:
[ 17.021241] == power state 3 ==
[ 17.021242] ui class: none
[ 17.021243] internal class: none
[ 17.021245] caps: video
[ 17.021247] uvd vclk: 0 dclk: 0
[ 17.021248] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021250] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021252] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021253] status:
[ 17.021417] switching from power state:
[ 17.021419] ui class: none
[ 17.021420] internal class: boot
[ 17.021422] caps: video
[ 17.021424] uvd vclk: 0 dclk: 0
[ 17.021426] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021428] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021430] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021431] status: c b
[ 17.021433] switching to power state:
[ 17.021435] ui class: performance
[ 17.021436] internal class: ovrdrv
[ 17.021438] caps: video
[ 17.021440] uvd vclk: 0 dclk: 0
[ 17.021442] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021444] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021446] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 17.021447] status: r
[ 17.302549] [drm] radeon: dpm initialized
[ 17.362667] [drm] fb mappable at 0xE0141000
[ 17.362672] [drm] vram apper at 0xE0000000
[ 17.362674] [drm] size 5242880
[ 17.362675] [drm] fb depth is 24
[ 17.362677] [drm] pitch is 5120
[ 17.362806] fbcon: radeondrmfb (fb0) is primary device
[ 17.384072] Console: switching to colour frame buffer device 128x48
[ 17.387486] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 17.387488] radeon 0000:02:00.0: registered panic notifier
[ 17.387498] [drm] Initialized radeon 2.36.0 20080528 for 0000:02:00.0 on minor 0
[ 18.120169] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input15
[ 18.120411] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input14
[ 18.120537] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input13
[ 18.120626] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
[ 18.120702] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
[ 18.120777] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
[ 18.120853] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
[ 18.120930] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
[ 18.121578] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 18.121604] hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 18.121606] hda-intel 0000:02:00.1: Using LPIB position fix
[ 18.121660] snd_hda_intel 0000:02:00.1: irq 42 for MSI/MSI-X
[ 18.124201] hda-intel 0000:02:00.1: Enable sync_write for stable communication
[ 18.227346] HDMI ATI/AMD: no speaker allocation for ELD
[ 18.227461] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card1/input16
[ 19.253556] cfg80211: World regulatory domain updated:
[ 19.253563] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.253566] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.253568] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.253570] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 19.253573] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.253575] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 19.253593] cfg80211: Calling CRDA for country: CN
[ 19.258068] cfg80211: Regulatory domain changed to country: CN
[ 19.258074] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 19.258076] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 19.258079] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 19.258081] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 19.258083] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[ 19.258084] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 19.404697] type=1400 audit(1394794423.041:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=504 comm="apparmor_parser"
[ 19.404707] type=1400 audit(1394794423.041:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=504 comm="apparmor_parser"
[ 19.404712] type=1400 audit(1394794423.041:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=504 comm="apparmor_parser"
[ 19.404732] type=1400 audit(1394794423.041:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=492 comm="apparmor_parser"
[ 19.404743] type=1400 audit(1394794423.041:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=492 comm="apparmor_parser"
[ 19.404748] type=1400 audit(1394794423.041:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=492 comm="apparmor_parser"
[ 19.405438] type=1400 audit(1394794423.041:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=504 comm="apparmor_parser"
[ 19.405445] type=1400 audit(1394794423.041:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=504 comm="apparmor_parser"
[ 19.405478] type=1400 audit(1394794423.041:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=492 comm="apparmor_parser"
[ 19.405484] type=1400 audit(1394794423.041:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=492 comm="apparmor_parser"
[ 21.194749] init: failsafe main process (572) killed by TERM signal
[ 24.385717] Bluetooth: Core ver 2.17
[ 24.386065] NET: Registered protocol family 31
[ 24.386068] Bluetooth: HCI device and connection manager initialized
[ 24.386081] Bluetooth: HCI socket layer initialized
[ 24.386084] Bluetooth: L2CAP socket layer initialized
[ 24.386091] Bluetooth: SCO socket layer initialized
[ 24.767222] Bluetooth: RFCOMM TTY layer initialized
[ 24.767238] Bluetooth: RFCOMM socket layer initialized
[ 24.767253] Bluetooth: RFCOMM ver 1.11
[ 24.945837] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.945842] Bluetooth: BNEP filters: protocol multicast
[ 24.945855] Bluetooth: BNEP socket layer initialized
[ 25.218163] init: avahi-cups-reload main process (788) terminated with status 1
[ 25.495766] ppdev: user-space parallel port driver
[ 26.119767] audit_printk_skb: 24 callbacks suppressed
[ 26.119773] type=1400 audit(1394794429.753:20): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=803 comm="apparmor_parser"
[ 26.119780] type=1400 audit(1394794429.753:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=803 comm="apparmor_parser"
[ 26.120703] type=1400 audit(1394794429.757:22): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=803 comm="apparmor_parser"
[ 30.361424] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 30.363971] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 30.476115] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 30.943716] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.308704] type=1400 audit(1394794434.945:23): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=861 comm="apparmor_parser"
[ 31.308713] type=1400 audit(1394794434.945:24): apparmor="STATUS" operation="profile_load" name="chromium_browser" pid=861 comm="apparmor_parser"
[ 31.308959] type=1400 audit(1394794434.945:25): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=860 comm="apparmor_parser"
[ 31.308969] type=1400 audit(1394794434.945:26): apparmor="STATUS" operation="profile_load" name="chromium_browser" pid=860 comm="apparmor_parser"
[ 31.309349] type=1400 audit(1394794434.945:27): apparmor="STATUS" operation="profile_replace" name="chromium_browser" pid=861 comm="apparmor_parser"
[ 31.309581] type=1400 audit(1394794434.945:28): apparmor="STATUS" operation="profile_replace" name="chromium_browser" pid=860 comm="apparmor_parser"
[ 31.315525] type=1400 audit(1394794434.949:29): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=863 comm="apparmor_parser"
[ 31.315536] type=1400 audit(1394794434.949:30): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=863 comm="apparmor_parser"
[ 31.315542] type=1400 audit(1394794434.949:31): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=863 comm="apparmor_parser"
[ 31.316403] type=1400 audit(1394794434.953:32): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=863 comm="apparmor_parser"
[ 33.584480] wlan0: authenticate with c8:3a:35:2e:fc:c9
[ 33.631560] wlan0: send auth to c8:3a:35:2e:fc:c9 (try 1/3)
[ 33.634880] wlan0: authenticated
[ 33.636050] wlan0: associate with c8:3a:35:2e:fc:c9 (try 1/3)
[ 33.638865] wlan0: RX AssocResp from c8:3a:35:2e:fc:c9 (capab=0x401 status=0 aid=1)
[ 33.646117] wlan0: associated
[ 33.646159] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.757371] init: isc-dhcp-server main process (1066) terminated with status 1
[ 33.757414] init: isc-dhcp-server main process ended, respawning
[ 34.018750] init: isc-dhcp-server main process (1098) terminated with status 1
[ 34.018795] init: isc-dhcp-server main process ended, respawning
[ 34.377959] init: isc-dhcp-server main process (1117) terminated with status 1
[ 34.378001] init: isc-dhcp-server main process ended, respawning
[ 34.746250] init: isc-dhcp-server main process (1134) terminated with status 1
[ 34.746299] init: isc-dhcp-server main process ended, respawning
[ 34.990020] init: isc-dhcp-server main process (1154) terminated with status 1
[ 34.990065] init: isc-dhcp-server main process ended, respawning
[ 35.299613] init: isc-dhcp-server main process (1174) terminated with status 1
[ 35.299661] init: isc-dhcp-server main process ended, respawning
[ 35.517859] init: isc-dhcp-server main process (1182) terminated with status 1
[ 35.517906] init: isc-dhcp-server main process ended, respawning
[ 35.638025] init: isc-dhcp-server main process (1192) terminated with status 1
[ 35.638075] init: isc-dhcp-server main process ended, respawning
[ 35.755667] init: isc-dhcp-server main process (1200) terminated with status 1
[ 35.755715] init: isc-dhcp-server main process ended, respawning
[ 35.890227] init: isc-dhcp-server main process (1208) terminated with status 1
[ 35.890274] init: isc-dhcp-server main process ended, respawning
[ 36.142914] init: isc-dhcp-server main process (1219) terminated with status 1
[ 36.142961] init: isc-dhcp-server respawning too fast, stopped
[ 39.373810] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.473709] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 40.487099] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 40.840249] 8021q: 802.1Q VLAN Support v1.8
[ 40.858150] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 637.429560] systemd-hostnamed[3249]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!


[Learner]

Θα σου προτείνω να δοκιμάσεις δυο πράγματα.

1) Μπες στο BIOS και ψάξε για IDE mode στον sata controller. Γύρισε το σε AHCI mode.

2) Άλλαξε θύρα σύνδεσης στον δίσκο (αν υπάρχει άλλη διαθέσιμη).

Θα χρειστούμε πάλι την dmesg μετά από τις παραπάνω αλλαγές. Για να σου βγάλει όλα τα αποτελέσματα και να μην τα κόβει μπορείς:

α) Να γυρίσεις το τερματικό σε unlimited scrolling από (edit → profile preferences → scrolling και κάνεις ένα tick στο unlimited)
ή
β) Δίνεις την εντολή → (dmesg > dmesg.txt) και μετά ανοίγεις το αρχείο dmesg.txt.

[qsd330]

δεν υποστηριζει AHCI η m/b
αλλαξα θυρες και ενεργοποιησα το smart
επεισης ,το καταλαβα σημερα, εβαλα τον νεο HDD στη θεση του παλιου και τον παλιο σε νεα θεση... αν παιζει καποιο ρολο... επειδη του εριξα ενα καθαρισμα πρεπει να μπερδεψα τις θεσεις και το καταλαβα επειση φωρτωσα για λιγο ms...
το ubuntu ειναι σε 3ο HDD atapi

το νεο dmesg δεν μπορω να το ποσταρω ολοκληρο για καποιο λογω ...φανταζομαι λογω μεγεθους ποσταρω απο εκει που γινεται η πρωτη αναφορα σε hdd

Spoiler: show

Κώδικας: Επιλογή όλων


[ 0.935802] sata_nv 0000:00:0e.0: version 3.5
[ 0.936186] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 0.936206] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 0.938369] scsi0 : sata_nv
[ 0.940069] scsi1 : sata_nv
[ 0.940140] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 21
[ 0.940144] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 21
[ 0.940534] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 0.940561] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 0.941137] scsi2 : sata_nv
[ 0.941414] scsi3 : sata_nv
[ 0.941471] ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 20
[ 0.941475] ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 20
[ 0.941524] pata_amd 0000:00:0d.0: version 0.4.1
[ 0.942362] scsi4 : pata_amd
[ 0.944387] scsi5 : pata_amd
[ 0.944462] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.944465] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.212065] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 1.229448] ata5.00: HPA detected: current 78163247, native 78165360
[ 1.229456] ata5.00: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
[ 1.229459] ata5.00: 78163247 sectors, multi 16: LBA
[ 1.229465] ata5.01: ATAPI: LITE-ON DVDRW SOHW-1633S, BS0Y, max UDMA/66
[ 1.229472] ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc6c50000) ACPI=0x3f01f (20:30:0x1f)
[ 1.229477] ata5: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc6c50000) ACPI=0x1f01f (20:30:0x1f)
[ 1.245372] ata5.00: configured for UDMA/100
[ 1.252074] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.252076] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.260459] ata5.01: configured for UDMA/66
[ 1.361382] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[ 1.361385] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.361388] usb 1-4: Product: 802.11 n WLAN
[ 1.361390] usb 1-4: Manufacturer: Ralink
[ 1.361392] usb 1-4: SerialNumber: 1.0
[ 1.720068] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.767474] ata2.00: HPA detected: current 625140335, native 625142448
[ 1.767479] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133
[ 1.767482] ata2.00: 625140335 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.792064] usb 2-2: new low-speed USB device number 2 using ohci-pci
[ 1.834110] ata2.00: configured for UDMA/133
[ 1.834326] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 1.834563] sd 1:0:0:0: [sda] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[ 1.834588] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.834689] sd 1:0:0:0: [sda] Write Protect is off
[ 1.834692] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.834795] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.886993] sda: sda1 sda2 < sda5 >
[ 1.887592] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.005079] usb 2-2: New USB device found, idVendor=177f, idProduct=0610
[ 2.005082] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.005085] usb 2-2: Product: Wireless Laser Mouse
[ 2.005088] usb 2-2: Manufacturer: Sweex
[ 2.012160] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.022358] usbcore: registered new interface driver usbhid
[ 2.022362] usbhid: USB HID core driver
[ 2.024728] input: Sweex Wireless Laser Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input4
[ 2.025329] hid-generic 0003:177F:0610.0001: input,hidraw0: USB HID v1.10 Mouse [Sweex Wireless Laser Mouse] on usb-0000:00:0b.0-2/input0
[ 2.184071] usb 2-3: new low-speed USB device number 3 using ohci-pci
[ 2.300070] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.346688] ata4.00: HPA detected: current 976771055, native 976773168
[ 2.346697] ata4.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 2.346699] ata4.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.399075] usb 2-3: New USB device found, idVendor=046d, idProduct=c505
[ 2.399078] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.399081] usb 2-3: Product: USB Receiver
[ 2.399083] usb 2-3: Manufacturer: Logitech
[ 2.410634] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input5
[ 2.410773] hid-generic 0003:046D:C505.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:0b.0-3/input0
[ 2.413336] ata4.00: configured for UDMA/133
[ 2.413565] scsi 3:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 2.413803] sd 3:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB)
[ 2.413887] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.413890] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.413925] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.414288] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.414439] scsi 4:0:0:0: Direct-Access ATA WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
[ 2.414595] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 2.415493] scsi 4:0:1:0: CD-ROM LITE-ON DVDRW SOHW-1633S BS0Y PQ: 0 ANSI: 5
[ 2.415687] sd 4:0:0:0: [sdc] 78163247 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 2.417999] sr0: scsi3-mmc drive: 62x/62x writer cd/rw xa/form2 cdda tray
[ 2.418004] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.418074] sd 4:0:0:0: [sdc] Write Protect is off
[ 2.418078] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.418132] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.418189] sr 4:0:1:0: Attached scsi CD-ROM sr0
[ 2.418294] sr 4:0:1:0: Attached scsi generic sg3 type 5
[ 2.418452] ata6: port disabled--ignoring
[ 2.422225] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input6
[ 2.422402] hid-generic 0003:046D:C505.0003: input,hidraw2: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-3/input1
[ 2.468167] sdb: sdb1 < sdb5 > sdb2
[ 2.468674] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.558657] sdc: sdc1 sdc2 < sdc5 >
[ 2.559216] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 2.823996] random: nonblocking pool is initialized
[ 3.175677] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.375865] init: ureadahead main process (168) terminated with status 5
[ 6.982156] Adding 3143676k swap on /dev/sdc5. Priority:-1 extents:1 across:3143676k FS
[ 9.121318] systemd-udevd[284]: starting version 204
[ 10.709087] lp: driver loaded but no devices found
[ 11.010156] Linux video capture interface: v2.00
[ 11.135912] v4l2loopback_dc: module verification failed: signature and/or required key missing - tainting kernel
[ 11.136307] v4l2loopback driver version 0.6.1-droidcam loaded
[ 11.954503] cfg80211: Calling CRDA to update world regulatory domain
[ 12.301737] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[ 12.432517] usb 1-4: reset high-speed USB device number 4 using ehci-pci
[ 12.574496] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 12.602619] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 12.773687] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.774212] usbcore: registered new interface driver rt2800usb
[ 13.392205] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 13.392281] i2c i2c-1: nForce2 SMBus adapter at 0x1c80
[ 13.810539] MCE: In-kernel MCE decoding enabled.
[ 16.757813] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 16.757970] nv_tco: Watchdog reboot not detected
[ 16.758054] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 17.557953] EDAC MC: Ver: 3.0.0
[ 17.580858] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 17.700948] AMD64 EDAC driver v3.4.0
[ 17.700997] EDAC amd64: DRAM ECC disabled.
[ 17.701003] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 17.701003] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 17.701003] (Note that use of the override may cause unknown side effects.)
[ 18.085121] [drm] Initialized drm 1.1.0 20060810
[ 18.702919] microcode: AMD CPU family 0xf not supported
[ 18.714205] microcode: AMD CPU family 0xf not supported
[ 19.395176] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 19.395189] hda_intel: Disabling MSI
[ 19.395221] hda-intel 0000:00:10.1: Disabling 64bit DMA
[ 19.399446] hda-intel 0000:00:10.1: Enable delay in RIRB handling
[ 19.692809] kvm: disabled by bios
[ 19.701812] kvm: disabled by bios
[ 20.140050] SKU: Nid=0x0 sku_cfg=0x0000e601
[ 20.140054] SKU: port_connectivity=0x0
[ 20.140056] SKU: enable_pcbeep=0x1
[ 20.140058] SKU: check_sum=0x00000000
[ 20.140059] SKU: customization=0x00000000
[ 20.140060] SKU: external_amp=0x0
[ 20.140061] SKU: platform_type=0x0
[ 20.140063] SKU: swap=0x0
[ 20.140064] SKU: override=0x1
[ 20.228045] autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 20.228050] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.228053] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 20.228055] mono: mono_out=0x0
[ 20.228056] dig-out=0x1e/0x0
[ 20.228057] inputs:
[ 20.228060] Rear Mic=0x18
[ 20.228062] Front Mic=0x19
[ 20.228064] Line=0x1a
[ 20.228065] CD=0x1c
[ 20.228066] dig-in=0x1f
[ 20.228069] realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0883
[ 20.503721] [drm] radeon kernel modesetting enabled.
[ 20.504201] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 20.504516] [drm] initializing kernel modesetting (RV610 0x1002:0x94C3 0x1043:0x01C2).
[ 20.504539] [drm] register mmio base: 0xF3000000
[ 20.504541] [drm] register mmio size: 65536
[ 20.504898] ATOM BIOS: 94C3.10.56.00.05.AS05
[ 20.504924] radeon 0000:02:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used)
[ 20.504927] radeon 0000:02:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF
[ 20.504930] [drm] Detected VRAM RAM=256M, BAR=256M
[ 20.504932] [drm] RAM width 64bits DDR
[ 20.505022] [TTM] Zone kernel: Available graphics memory: 1540918 kiB
[ 20.505024] [TTM] Initializing pool allocator
[ 20.505030] [TTM] Initializing DMA pool allocator
[ 20.505057] [drm] radeon: 256M of VRAM memory ready
[ 20.505058] [drm] radeon: 512M of GTT memory ready.
[ 20.505081] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 20.535002] [drm] Loading RV610 Microcode
[ 22.136206] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input15
[ 22.136317] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input14
[ 22.136393] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input13
[ 22.136466] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
[ 22.136539] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
[ 22.136615] input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
[ 22.136690] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
[ 22.136764] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input8
[ 22.184468] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
[ 22.184525] radeon 0000:02:00.0: WB enabled
[ 22.184529] radeon 0000:02:00.0: fence driver on ring 0 use gpu addr 0x0000000010000c00 and cpu addr 0xffff8800b746fc00
[ 22.184533] radeon 0000:02:00.0: fence driver on ring 3 use gpu addr 0x0000000010000c0c and cpu addr 0xffff8800b746fc0c
[ 22.184536] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 22.184537] [drm] Driver supports precise vblank timestamp query.
[ 22.184565] radeon 0000:02:00.0: irq 41 for MSI/MSI-X
[ 22.184581] radeon 0000:02:00.0: radeon: using MSI.
[ 22.184610] [drm] radeon: irq initialized.
[ 22.215757] [drm] ring test on 0 succeeded in 1 usecs
[ 22.215816] [drm] ring test on 3 succeeded in 1 usecs
[ 22.215949] [drm] Enabling audio 0 support
[ 22.215970] [drm] ib test on ring 0 succeeded in 0 usecs
[ 22.215986] [drm] ib test on ring 3 succeeded in 0 usecs
[ 22.216353] [drm] Radeon Display Connectors
[ 22.216355] [drm] Connector 0:
[ 22.216357] [drm] DIN-1
[ 22.216358] [drm] Encoders:
[ 22.216359] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 22.216361] [drm] Connector 1:
[ 22.216362] [drm] VGA-1
[ 22.216365] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 22.216366] [drm] Encoders:
[ 22.216368] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 22.216369] [drm] Connector 2:
[ 22.216370] [drm] DVI-I-1
[ 22.216372] [drm] HPD1
[ 22.216374] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 22.216375] [drm] Encoders:
[ 22.216376] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 22.216378] [drm] DFP1: INTERNAL_LVTM1
[ 22.216391] [drm] Internal thermal controller with fan control
[ 22.216442] == power state 0 ==
[ 22.216444] ui class: none
[ 22.216447] internal class: boot
[ 22.216449] caps: video
[ 22.216451] uvd vclk: 0 dclk: 0
[ 22.216453] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216455] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216457] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216458] status: c r b
[ 22.216461] == power state 1 ==
[ 22.216462] ui class: performance
[ 22.216463] internal class: ovrdrv
[ 22.216465] caps: video
[ 22.216467] uvd vclk: 0 dclk: 0
[ 22.216469] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216470] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216472] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216473] status:
[ 22.216475] == power state 2 ==
[ 22.216476] ui class: performance
[ 22.216477] internal class: none
[ 22.216479] caps: video
[ 22.216481] uvd vclk: 0 dclk: 0
[ 22.216482] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216484] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216486] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216487] status:
[ 22.216488] == power state 3 ==
[ 22.216489] ui class: none
[ 22.216491] internal class: none
[ 22.216492] caps: video
[ 22.216494] uvd vclk: 0 dclk: 0
[ 22.216496] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216498] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216499] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216501] status:
[ 22.216721] switching from power state:
[ 22.216722] ui class: none
[ 22.216723] internal class: boot
[ 22.216725] caps: video
[ 22.216727] uvd vclk: 0 dclk: 0
[ 22.216729] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216730] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216732] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216733] status: c b
[ 22.216735] switching to power state:
[ 22.216737] ui class: performance
[ 22.216738] internal class: ovrdrv
[ 22.216739] caps: video
[ 22.216741] uvd vclk: 0 dclk: 0
[ 22.216743] power level 0 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216745] power level 1 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216746] power level 2 sclk: 52500 mclk: 40000 vddc: 1100
[ 22.216748] status: r
[ 22.496874] [drm] radeon: dpm initialized
[ 22.557997] [drm] fb mappable at 0xE0141000
[ 22.558000] [drm] vram apper at 0xE0000000
[ 22.558002] [drm] size 5242880
[ 22.558003] [drm] fb depth is 24
[ 22.558005] [drm] pitch is 5120
[ 22.558238] fbcon: radeondrmfb (fb0) is primary device
[ 22.576476] Console: switching to colour frame buffer device 128x48
[ 22.579782] radeon 0000:02:00.0: fb0: radeondrmfb frame buffer device
[ 22.579785] radeon 0000:02:00.0: registered panic notifier
[ 22.579794] [drm] Initialized radeon 2.36.0 20080528 for 0000:02:00.0 on minor 0
[ 22.580291] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 22.580324] hda-intel 0000:02:00.1: Handle VGA-switcheroo audio client
[ 22.580326] hda-intel 0000:02:00.1: Using LPIB position fix
[ 22.580379] snd_hda_intel 0000:02:00.1: irq 42 for MSI/MSI-X
[ 22.584831] hda-intel 0000:02:00.1: Enable sync_write for stable communication
[ 22.675768] HDMI ATI/AMD: no speaker allocation for ELD
[ 22.675869] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card1/input16
[ 23.811903] cfg80211: World regulatory domain updated:
[ 23.811910] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 23.811913] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.811915] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.811918] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 23.811920] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 23.811922] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 24.461294] type=1400 audit(1394966995.096:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=488 comm="apparmor_parser"
[ 24.461303] type=1400 audit(1394966995.096:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=488 comm="apparmor_parser"
[ 24.461308] type=1400 audit(1394966995.096:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=488 comm="apparmor_parser"
[ 24.461343] type=1400 audit(1394966995.096:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=512 comm="apparmor_parser"
[ 24.461355] type=1400 audit(1394966995.096:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser"
[ 24.461360] type=1400 audit(1394966995.096:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser"
[ 24.462041] type=1400 audit(1394966995.096:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=488 comm="apparmor_parser"
[ 24.462048] type=1400 audit(1394966995.096:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=488 comm="apparmor_parser"
[ 24.462086] type=1400 audit(1394966995.096:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=512 comm="apparmor_parser"
[ 24.462093] type=1400 audit(1394966995.096:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=512 comm="apparmor_parser"
[ 26.331117] init: failsafe main process (574) killed by TERM signal
[ 29.600225] Bluetooth: Core ver 2.17
[ 29.600267] NET: Registered protocol family 31
[ 29.600270] Bluetooth: HCI device and connection manager initialized
[ 29.600283] Bluetooth: HCI socket layer initialized
[ 29.600286] Bluetooth: L2CAP socket layer initialized
[ 29.600292] Bluetooth: SCO socket layer initialized
[ 29.880192] Bluetooth: RFCOMM TTY layer initialized
[ 29.880208] Bluetooth: RFCOMM socket layer initialized
[ 29.880222] Bluetooth: RFCOMM ver 1.11
[ 30.129118] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.129123] Bluetooth: BNEP filters: protocol multicast
[ 30.129136] Bluetooth: BNEP socket layer initialized
[ 30.177038] init: avahi-cups-reload main process (790) terminated with status 1
[ 30.462934] ppdev: user-space parallel port driver
[ 31.055279] audit_printk_skb: 6 callbacks suppressed
[ 31.055284] type=1400 audit(1394967001.692:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=805 comm="apparmor_parser"
[ 31.055291] type=1400 audit(1394967001.692:15): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=805 comm="apparmor_parser"
[ 31.056197] type=1400 audit(1394967001.692:16): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=805 comm="apparmor_parser"
[ 35.085955] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 35.175933] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 35.635052] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.238761] type=1400 audit(1394967006.876:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/x86_64-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=862 comm="apparmor_parser"
[ 36.238771] type=1400 audit(1394967006.876:18): apparmor="STATUS" operation="profile_load" name="chromium_browser" pid=862 comm="apparmor_parser"
[ 36.239210] type=1400 audit(1394967006.876:19): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=861 comm="apparmor_parser"
[ 36.239220] type=1400 audit(1394967006.876:20): apparmor="STATUS" operation="profile_load" name="chromium_browser" pid=861 comm="apparmor_parser"
[ 36.239368] type=1400 audit(1394967006.876:21): apparmor="STATUS" operation="profile_replace" name="chromium_browser" pid=862 comm="apparmor_parser"
[ 36.239801] type=1400 audit(1394967006.876:22): apparmor="STATUS" operation="profile_replace" name="chromium_browser" pid=861 comm="apparmor_parser"
[ 36.246880] type=1400 audit(1394967006.880:23): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=864 comm="apparmor_parser"
[ 36.246892] type=1400 audit(1394967006.880:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser"
[ 36.246897] type=1400 audit(1394967006.880:25): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=864 comm="apparmor_parser"
[ 36.247629] type=1400 audit(1394967006.880:26): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=864 comm="apparmor_parser"
[ 38.820512] init: isc-dhcp-server main process (1072) terminated with status 1
[ 38.820559] init: isc-dhcp-server main process ended, respawning
[ 39.005064] init: isc-dhcp-server main process (1104) terminated with status 1
[ 39.005114] init: isc-dhcp-server main process ended, respawning
[ 39.180907] init: isc-dhcp-server main process (1125) terminated with status 1
[ 39.180954] init: isc-dhcp-server main process ended, respawning
[ 39.367169] init: isc-dhcp-server main process (1136) terminated with status 1
[ 39.367218] init: isc-dhcp-server main process ended, respawning
[ 39.751623] init: isc-dhcp-server main process (1178) terminated with status 1
[ 39.751672] init: isc-dhcp-server main process ended, respawning
[ 40.069491] init: isc-dhcp-server main process (1196) terminated with status 1
[ 40.069538] init: isc-dhcp-server main process ended, respawning
[ 40.228959] init: isc-dhcp-server main process (1209) terminated with status 1
[ 40.229006] init: isc-dhcp-server main process ended, respawning
[ 40.379859] init: isc-dhcp-server main process (1219) terminated with status 1
[ 40.379906] init: isc-dhcp-server main process ended, respawning
[ 40.514340] init: isc-dhcp-server main process (1227) terminated with status 1
[ 40.514383] init: isc-dhcp-server main process ended, respawning
[ 40.656991] init: isc-dhcp-server main process (1235) terminated with status 1
[ 40.657039] init: isc-dhcp-server main process ended, respawning
[ 40.792937] init: isc-dhcp-server main process (1246) terminated with status 1
[ 40.792984] init: isc-dhcp-server respawning too fast, stopped
[ 43.957030] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 44.029065] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 72.091273] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 72.254686] ISO 9660 Extensions: RRIP_1991A
[ 195.708087] usb 1-1: new high-speed USB device number 5 using ehci-pci
[ 195.857404] usb 1-1: New USB device found, idVendor=0cf3, idProduct=1006
[ 195.857417] usb 1-1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
[ 195.857424] usb 1-1: Product: USB2.0 WLAN
[ 195.857429] usb 1-1: Manufacturer: ATHEROS
[ 195.857434] usb 1-1: SerialNumber: 12345
[ 196.058474] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
[ 196.058863] usbcore: registered new interface driver ath9k_htc
[ 196.363924] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
[ 196.601161] ath9k_htc 1-1:1.0: ath9k_htc: HTC initialized with 33 credits
[ 196.830912] ath9k_htc 1-1:1.0: ath9k_htc: FW Version: 1.3
[ 196.830919] ath: EEPROM regdomain: 0x809c
[ 196.830922] ath: EEPROM indicates we should expect a country code
[ 196.830926] ath: doing EEPROM country->regdmn map search
[ 196.830930] ath: country maps to regdmn code: 0x52
[ 196.830933] ath: Country alpha2 being used: CN
[ 196.830937] ath: Regpair used: 0x52
[ 196.836322] ieee80211 phy1: Atheros AR9271 Rev:1
[ 196.836381] cfg80211: Calling CRDA for country: CN
[ 197.086260] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 197.086317] cfg80211: Regulatory domain changed to country: CN
[ 197.086324] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 197.086327] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 197.086330] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 197.086333] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 197.086335] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm)
[ 197.086337] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm)
[ 216.359535] usb 1-4: USB disconnect, device number 4
[ 217.160085] usb 1-4: new high-speed USB device number 6 using ehci-pci
[ 217.309912] usb 1-4: New USB device found, idVendor=148f, idProduct=3070
[ 217.309925] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 217.309931] usb 1-4: Product: 802.11 n WLAN
[ 217.309937] usb 1-4: Manufacturer: Ralink
[ 217.309942] usb 1-4: SerialNumber: 1.0
[ 217.424093] usb 1-4: reset high-speed USB device number 6 using ehci-pci
[ 217.567281] ieee80211 phy2: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
[ 217.595527] ieee80211 phy2: rt2x00_set_rf: Info - RF chipset 0005 detected
[ 217.596235] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[ 217.645492] ieee80211 phy2: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
[ 217.645589] ieee80211 phy2: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
[ 218.123723] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 220.385003] wlan0: authenticate with c8:3a:35:2e:fc:c9
[ 220.439948] wlan0: send auth to c8:3a:35:2e:fc:c9 (try 1/3)
[ 220.443697] wlan0: authenticated
[ 220.448114] wlan0: associate with c8:3a:35:2e:fc:c9 (try 1/3)
[ 220.451060] wlan0: RX AssocResp from c8:3a:35:2e:fc:c9 (capab=0x401 status=0 aid=1)
[ 220.458542] wlan0: associated
[ 220.458617] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready


[qsd330]

τελος λογω αναβαθμησης