

ίσως να έχει πρόβλημα η μητρική πλακέτα και συγκεκριμένα το acpi ???

Συντονιστής: adem1
Dimitrios.gr έγραψε:Έβαλα καινούργιο δισκο και πάλι τα ίδια ,, λεει ότι λείπει οδηγοί acpi. , πως μπορω να απομονώσω αυτο?
Dimitrios.gr έγραψε:προσπαθησα να ενημερώσω το βιοs αλλα δεν το δέχεται , μέσα απο τα xp ,δυστυχώς στην επανεκκίνηση κράσαραν τα xp .και βγάζει μπλε οθόνη .. !!!!!
ίσως να έχει πρόβλημα η μητρική πλακέτα και συγκεκριμένα το acpi ???
dmesg
eliasps έγραψε:Dimitrios.gr έγραψε:Έβαλα καινούργιο δισκο και πάλι τα ίδια ,, λεει ότι λείπει οδηγοί acpi. , πως μπορω να απομονώσω αυτο?
Που το λέει αυτό; Δοκίμασες και με άλλες εκδόσεις όπως είπα;
Dimitrios.gr έγραψε:προσπαθησα να ενημερώσω το βιοs αλλα δεν το δέχεται , μέσα απο τα xp ,δυστυχώς στην επανεκκίνηση κράσαραν τα xp .και βγάζει μπλε οθόνη .. !!!!!
ίσως να έχει πρόβλημα η μητρική πλακέτα και συγκεκριμένα το acpi ???
dmesg
[ 0.176727] pci 0000:00:06.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.176730] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.176733] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.176735] pci 0000:00:06.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.176737] pci 0000:00:06.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.176739] pci 0000:00:06.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.176741] pci 0000:00:06.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.176743] pci 0000:00:06.0: bridge window [mem 0x7ff00000-0xfebfffff] (subtractive decode)
[ 0.176771] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.176774] pci 0000:00:0e.0: bridge window [io 0xb000-0xcfff]
[ 0.176777] pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.176810] pci 0000:03:00.0: [10de:0402] type 00 class 0x030000
[ 0.176818] pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.176826] pci 0000:03:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.176834] pci 0000:03:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.176840] pci 0000:03:00.0: reg 0x24: [io 0xac00-0xac7f]
[ 0.176846] pci 0000:03:00.0: reg 0x30: [mem 0xfbfe0000-0xfbffffff pref]
[ 0.188016] pci 0000:00:0f.0: PCI bridge to [bus 03]
[ 0.188019] pci 0000:00:0f.0: bridge window [io 0xa000-0xafff]
[ 0.188021] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.188024] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.188629] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188679] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[ 0.188727] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188774] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188823] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188871] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
[ 0.188920] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.188969] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.189017] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.189067] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.189115] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.189164] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[ 0.189212] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.189260] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.189309] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.189358] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.189406] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.189455] ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
[ 0.189510] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
[ 0.189563] ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 *11 14 15)
[ 0.189648] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.189721] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.189793] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.189867] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.189939] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.190011] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.190084] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.190157] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.190230] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.190304] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.190377] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.190450] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.190523] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.190597] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.190670] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.190743] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.190817] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.190890] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.190964] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.191037] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.191214] ACPI: Enabled 1 GPEs in block 20 to 5F
[ 0.191220] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.191267] Found 1 acpi root devices
[ 0.192030] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.192030] vgaarb: loaded
[ 0.192030] vgaarb: bridge control possible 0000:03:00.0
[ 0.192222] SCSI subsystem initialized
[ 0.192249] libata version 3.00 loaded.
[ 0.192249] ACPI: bus type USB registered
[ 0.192249] usbcore: registered new interface driver usbfs
[ 0.192249] usbcore: registered new interface driver hub
[ 0.196011] usbcore: registered new device driver usb
[ 0.196074] PCI: Using ACPI for IRQ routing
[ 0.197109] PCI: pci_cache_line_size set to 64 bytes
[ 0.197142] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.197145] e820: reserve RAM buffer [mem 0x7fee0000-0x7fffffff]
[ 0.197245] NetLabel: Initializing
[ 0.197246] NetLabel: domain hash size = 128
[ 0.197247] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.197261] NetLabel: unlabeled traffic allowed by default
[ 0.197275] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.197275] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.197275] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.198081] Switched to clocksource hpet
[ 0.203580] AppArmor: AppArmor Filesystem Enabled
[ 0.203622] pnp: PnP ACPI init
[ 0.203640] ACPI: bus type PNP registered
[ 0.203794] system 00:00: [io 0x1000-0x107f] has been reserved
[ 0.203796] system 00:00: [io 0x1080-0x10ff] has been reserved
[ 0.203799] system 00:00: [io 0x1400-0x147f] has been reserved
[ 0.203801] system 00:00: [io 0x1480-0x14ff] has been reserved
[ 0.203804] system 00:00: [io 0x1800-0x187f] has been reserved
[ 0.203806] system 00:00: [io 0x1880-0x18ff] has been reserved
[ 0.203811] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.203912] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.203914] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.203917] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.203919] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.203930] pnp 00:02: [dma 4]
[ 0.203950] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.204047] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.204091] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.204113] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.204146] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.204284] pnp 00:07: [dma 2]
[ 0.204313] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.204528] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.204835] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.204959] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.205536] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.205539] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.205681] system 00:0c: [mem 0x000cd200-0x000cffff] has been reserved
[ 0.205684] system 00:0c: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.205686] system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.205689] system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.205691] system 00:0c: [mem 0xfefff000-0xfefff0ff] has been reserved
[ 0.205694] system 00:0c: [mem 0x7fee0000-0x7fefffff] could not be reserved
[ 0.205696] system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.205699] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.205701] system 00:0c: [mem 0x00100000-0x7fedffff] could not be reserved
[ 0.205704] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.205706] system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.205709] system 00:0c: [mem 0xfefff000-0xfeffffff] could not be reserved
[ 0.205711] system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved
[ 0.205714] system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved
[ 0.205716] system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved
[ 0.205719] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.205727] pnp: PnP ACPI: found 13 devices
[ 0.205728] ACPI: bus type PNP unregistered
[ 0.212994] pci 0000:00:06.0: PCI bridge to [bus 01]
[ 0.212998] pci 0000:00:06.0: bridge window [io 0xd000-0xdfff]
[ 0.213001] pci 0000:00:06.0: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.213004] pci 0000:00:0e.0: PCI bridge to [bus 02]
[ 0.213006] pci 0000:00:0e.0: bridge window [io 0xb000-0xcfff]
[ 0.213009] pci 0000:00:0e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.213012] pci 0000:00:0f.0: PCI bridge to [bus 03]
[ 0.213014] pci 0000:00:0f.0: bridge window [io 0xa000-0xafff]
[ 0.213017] pci 0000:00:0f.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.213020] pci 0000:00:0f.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.213023] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.213025] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.213027] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.213029] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.213031] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff]
[ 0.213033] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.213035] pci_bus 0000:01: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.213037] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.213039] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.213040] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.213042] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.213044] pci_bus 0000:01: resource 8 [mem 0x7ff00000-0xfebfffff]
[ 0.213046] pci_bus 0000:02: resource 0 [io 0xb000-0xcfff]
[ 0.213048] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.213050] pci_bus 0000:03: resource 0 [io 0xa000-0xafff]
[ 0.213052] pci_bus 0000:03: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.213054] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.213088] NET: Registered protocol family 2
[ 0.213244] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.213327] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.213424] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.213490] TCP: reno registered
[ 0.213495] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.213514] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.213585] NET: Registered protocol family 1
[ 0.213888] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 0.284629] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 0.284786] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.284827] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.284869] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.284910] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.284954] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.285003] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.285057] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.285113] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.285172] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.285192] pci 0000:03:00.0: Boot video device
[ 0.285195] PCI: CLS 32 bytes, default 64
[ 0.285279] Trying to unpack rootfs image as initramfs...
[ 4.041985] Freeing initrd memory: 20168K (ffff88007eb2d000 - ffff88007fedf000)
[ 4.042352] microcode: AMD CPU family 0xf not supported
[ 4.042354] Scanning for low memory corruption every 60 seconds
[ 4.042629] Initialise system trusted keyring
[ 4.042678] audit: initializing netlink socket (disabled)
[ 4.042693] type=2000 audit(1167635748.040:1): initialized
[ 4.066119] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.067536] VFS: Disk quotas dquot_6.5.2
[ 4.067582] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.068109] fuse init (API version 7.22)
[ 4.068188] msgmni has been set to 3995
[ 4.068244] Key type big_key registered
[ 4.068864] Key type asymmetric registered
[ 4.068866] Asymmetric key parser 'x509' registered
[ 4.068913] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.068958] io scheduler noop registered
[ 4.068960] io scheduler deadline registered (default)
[ 4.068985] io scheduler cfq registered
[ 4.069100] pcieport 0000:00:0e.0: irq 40 for MSI/MSI-X
[ 4.069149] pcieport 0000:00:0f.0: irq 41 for MSI/MSI-X
[ 4.069194] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.069211] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.069262] ipmi message handler version 39.2
[ 4.069317] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 4.069322] ACPI: Power Button [PWRB]
[ 4.069386] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 4.069388] ACPI: Power Button [PWRF]
[ 4.069430] ACPI: Fan [FAN] (on)
[ 4.069446] ACPI: processor limited to max C-state 1
[ 4.069687] ACPI: [Package] has zero elements (ffff880079c10f80)
[ 4.069688] ACPI: Invalid passive threshold
[ 4.069879] thermal LNXTHERM:00: registered as thermal_zone0
[ 4.069881] ACPI: Thermal Zone [THRM] (40 C)
[ 4.069905] GHES: HEST is not enabled!
[ 4.069988] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 4.090342] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 4.092069] Linux agpgart interface v0.103
[ 4.093590] brd: module loaded
[ 4.094411] loop: module loaded
[ 4.094840] libphy: Fixed MDIO Bus: probed
[ 4.094935] tun: Universal TUN/TAP device driver, 1.6
[ 4.094937] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 4.094988] PPP generic driver version 2.4.2
[ 4.095038] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.095043] ehci-pci: EHCI PCI platform driver
[ 4.095207] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 4.095214] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 4.095222] ehci-pci 0000:00:02.1: debug port 1
[ 4.095250] ehci-pci 0000:00:02.1: cache line size of 32 is not supported
[ 4.095273] ehci-pci 0000:00:02.1: irq 22, io mem 0xfe02e000
[ 4.108203] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 4.108268] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.108270] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.108272] usb usb1: Product: EHCI Host Controller
[ 4.108274] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 4.108276] usb usb1: SerialNumber: 0000:00:02.1
[ 4.108460] hub 1-0:1.0: USB hub found
[ 4.108472] hub 1-0:1.0: 10 ports detected
[ 4.108656] ehci-platform: EHCI generic platform driver
[ 4.108669] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.108670] ohci-pci: OHCI PCI platform driver
[ 4.108831] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 4.108837] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 4.108869] ohci-pci 0000:00:02.0: irq 23, io mem 0xfe02f000
[ 4.166323] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.166325] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.166327] usb usb2: Product: OHCI PCI host controller
[ 4.166329] usb usb2: Manufacturer: Linux 3.13.0-24-generic ohci_hcd
[ 4.166330] usb usb2: SerialNumber: 0000:00:02.0
[ 4.166470] hub 2-0:1.0: USB hub found
[ 4.166480] hub 2-0:1.0: 10 ports detected
[ 4.166674] ohci-platform: OHCI generic platform driver
[ 4.166684] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.166748] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.166750] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.166894] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.167011] mousedev: PS/2 mouse device common for all mice
[ 4.167174] rtc_cmos 00:04: RTC can wake from S4
[ 4.167323] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 4.167358] rtc_cmos 00:04: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 4.167424] device-mapper: uevent: version 1.0.3
[ 4.167503] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 4.167511] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.167613] TCP: cubic registered
[ 4.167713] NET: Registered protocol family 10
[ 4.167905] NET: Registered protocol family 17
[ 4.167915] Key type dns_resolver registered
[ 4.168199] Loading compiled-in X.509 certificates
[ 4.169115] Loaded X.509 cert 'Magrathea: Glacier signing key: 00a5a65759de474bc5c43120880c1b94a539f431'
[ 4.169130] registered taskstats version 1
[ 4.171747] Key type trusted registered
[ 4.174094] Key type encrypted registered
[ 4.176251] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.176256] IMA: No TPM chip found, activating TPM-bypass!
[ 4.176484] regulator-dummy: disabling
[ 4.176546] Magic number: 7:501:267
[ 4.176655] rtc_cmos 00:04: setting system clock to 2007-01-01 07:15:49 UTC (1167635749)
[ 4.176741] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 4.176741] [Firmware Bug]: powernow-k8: First, make sure Cool'N'Quiet is enabled in the BIOS.
[ 4.176741] [Firmware Bug]: powernow-k8: If that doesn't help, try upgrading your BIOS.
[ 4.176752] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.176753] EDD information not available.
[ 4.176785] PM: Hibernation image not present or could not be loaded.
[ 4.178479] Freeing unused kernel memory: 1332K (ffffffff81d1e000 - ffffffff81e6b000)
[ 4.178484] Write protecting the kernel read-only data: 12288k
[ 4.181098] Freeing unused kernel memory: 844K (ffff88000172d000 - ffff880001800000)
[ 4.183265] Freeing unused kernel memory: 708K (ffff880001b4f000 - ffff880001c00000)
[ 4.197428] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 4.199911] systemd-udevd[104]: starting version 204
[ 4.226753] sata_nv 0000:00:05.0: version 3.5
[ 4.227009] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 4.227030] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 4.229638] scsi0 : sata_nv
[ 4.229741] scsi1 : sata_nv
[ 4.229780] ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf700 irq 21
[ 4.229782] ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 21
[ 4.229804] pata_amd 0000:00:04.0: version 0.4.1
[ 4.231608] scsi2 : pata_amd
[ 4.232936] scsi3 : pata_amd
[ 4.232980] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 4.232982] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 4.233015] ata3: port disabled--ignoring
[ 4.233411] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 4.233433] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 4.234296] scsi4 : sata_nv
[ 4.234392] scsi5 : sata_nv
[ 4.234433] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf200 irq 20
[ 4.234436] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf208 irq 20
[ 4.234695] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[ 4.234705] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 4.235427] scsi6 : sata_nv
[ 4.235489] scsi7 : sata_nv
[ 4.235526] ata7: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xed00 irq 23
[ 4.235528] ata8: SATA max UDMA/133 cmd 0xef00 ctl 0xee00 bmdma 0xed08 irq 23
[ 4.238684] Floppy drive(s): fd0 is 1.44M
[ 4.243405] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 4.243664] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 4.251011] [drm] Initialized drm 1.1.0 20060810
[ 4.258762] FDC 0 is a post-1991 82077
[ 4.259060] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 4.277450] wmi: Mapper loaded
[ 4.299394] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 4.303529] [drm] hdmi device not found 3 0 1
[ 4.303600] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x084200a2
[ 4.303602] nouveau [ DEVICE][0000:03:00.0] Chipset: G84 (NV84)
[ 4.303604] nouveau [ DEVICE][0000:03:00.0] Family : NV50
[ 4.304142] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 4.312067] firewire_ohci 0000:01:0b.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 4.350500] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 4.350502] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 4.350635] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 4.350638] nouveau [ VBIOS][0000:03:00.0] version 60.84.61.00.00
[ 4.370851] nouveau 0000:03:00.0: irq 42 for MSI/MSI-X
[ 4.370860] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 4.370894] nouveau [ PFB][0000:03:00.0] RAM type: DDR2
[ 4.370896] nouveau [ PFB][0000:03:00.0] RAM size: 512 MiB
[ 4.370897] nouveau [ PFB][0000:03:00.0] ZCOMP: 1892 tags
[ 4.372994] nouveau [ VOLT][0000:03:00.0] GPU voltage: 1320000uv
[ 4.395050] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 4.395060] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 4.395080] nouveau [ PTHERM][0000:03:00.0] internal sensor: yes
[ 4.395098] nouveau [ CLK][0000:03:00.0] 20: core 540 MHz shader 1188 MHz memory 400 MHz
[ 4.395134] nouveau [ CLK][0000:03:00.0] --: core 540 MHz shader 1188 MHz memory 399 MHz
[ 4.395285] [TTM] Zone kernel: Available graphics memory: 1024334 kiB
[ 4.395287] [TTM] Initializing pool allocator
[ 4.395291] [TTM] Initializing DMA pool allocator
[ 4.395302] nouveau [ DRM] VRAM: 512 MiB
[ 4.395304] nouveau [ DRM] GART: 1048576 MiB
[ 4.395308] nouveau [ DRM] TMDS table version 2.0
[ 4.395310] nouveau [ DRM] DCB version 4.0
[ 4.395312] nouveau [ DRM] DCB outp 00: 01000302 00020030
[ 4.395315] nouveau [ DRM] DCB outp 01: 02000300 00000028
[ 4.395316] nouveau [ DRM] DCB outp 02: 04011310 00000028
[ 4.395318] nouveau [ DRM] DCB outp 03: 010223f1 00c0c080
[ 4.395320] nouveau [ DRM] DCB conn 00: 1030
[ 4.395323] nouveau [ DRM] DCB conn 01: 2130
[ 4.395324] nouveau [ DRM] DCB conn 02: 0210
[ 4.395326] nouveau [ DRM] DCB conn 03: 0211
[ 4.395328] nouveau [ DRM] DCB conn 04: 0213
[ 4.399867] nouveau W[ DRM] failed to create encoder 0/1/0: -19
[ 4.399870] nouveau W[ DRM] TV-1 has no encoders, removing
[ 4.399899] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.399900] [drm] No driver support for vblank timestamp query.
[ 4.404581] nouveau [ DRM] MM: using CRYPT for buffer copies
[ 4.445705] nouveau [ DRM] allocated 1280x1024 fb: 0x70000, bo ffff88007a2a4800
[ 4.445791] fbcon: nouveaufb (fb0) is primary device
[ 4.515601] Console: switching to colour frame buffer device 160x64
[ 4.516816] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 4.516818] nouveau 0000:03:00.0: registered panic notifier
[ 4.516824] [drm] Initialized nouveau 1.1.1 20120801 for 0000:03:00.0 on minor 0
[ 4.552195] ata7: SATA link down (SStatus 0 SControl 300)
[ 4.696203] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.704202] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.704658] ata1.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133
[ 4.704660] ata1.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.720667] ata1.00: configured for UDMA/133
[ 4.720919] scsi 0:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5
[ 4.721118] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.721121] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 4.721199] sd 0:0:0:0: [sda] Write Protect is off
[ 4.721201] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.721233] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.728313] ata5.00: ATAPI: LITE-ON DVDRW LH-20A1S, 9L08, max UDMA/100
[ 4.737725] sda: sda1
[ 4.738115] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.740205] usb 1-3: new high-speed USB device number 3 using ehci-pci
[ 4.760315] ata5.00: configured for UDMA/100
[ 4.764390] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1d:60:a2:af:9a
[ 4.764393] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 4.764660] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
[ 4.848321] firewire_core 0000:01:0b.0: created device fw0: GUID 0011d800017ed76f, S400
[ 4.874189] usb 1-3: New USB device found, idVendor=1b1c, idProduct=1a06
[ 4.874192] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.874194] usb 1-3: Product: Slider 3.0
[ 4.874195] usb 1-3: Manufacturer: Corsair
[ 4.874197] usb 1-3: SerialNumber: 22090722350000030200
[ 4.877521] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 4.877631] scsi8 : usb-storage 1-3:1.0
[ 4.877699] usbcore: registered new interface driver usb-storage
[ 5.176319] usb 2-2: new full-speed USB device number 2 using ohci-pci
[ 5.188204] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.196311] ata2.00: ATAPI: ASUS DVD-E818AT, 1.00, max UDMA/100
[ 5.212311] ata2.00: configured for UDMA/100
[ 5.214264] scsi 1:0:0:0: CD-ROM ASUS DVD-E818AT 1.00 PQ: 0 ANSI: 5
[ 5.216751] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 5.216753] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 5.216898] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.217117] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.217270] ata4: port disabled--ignoring
[ 5.218961] scsi 4:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1S 9L08 PQ: 0 ANSI: 5
[ 5.222599] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.222679] sr 4:0:0:0: Attached scsi CD-ROM sr1
[ 5.222795] sr 4:0:0:0: Attached scsi generic sg2 type 5
[ 5.288704] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1d:60:a2:76:ed
[ 5.288708] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 5.399227] usb 2-2: New USB device found, idVendor=045e, idProduct=0724
[ 5.399232] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.399234] usb 2-2: Product: SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse
[ 5.399236] usb 2-2: Manufacturer: Microsoft
[ 5.405300] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.419989] usbcore: registered new interface driver usbhid
[ 5.419994] usbhid: USB HID core driver
[ 5.422504] input: Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3
[ 5.422903] hid-generic 0003:045E:0724.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft SideWinder\xffffffe2\xffffff84\xffffffa2\xffffff84\xffffffa2 Mouse] on usb-0000:00:02.0-2/input0
[ 5.532138] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.844298] ata8: SATA link down (SStatus 0 SControl 300)
[ 5.883572] scsi 8:0:0:0: Direct-Access Corsair Slider 3.0 1.00 PQ: 0 ANSI: 4
[ 5.883932] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 5.885303] sd 8:0:0:0: [sdb] 31334400 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 5.885675] sd 8:0:0:0: [sdb] Write Protect is off
[ 5.885677] sd 8:0:0:0: [sdb] Mode Sense: bf 00 00 00
[ 5.886050] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.888936] sdb: sdb1
[ 5.891927] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 6.095515] random: nonblocking pool is initialized
[ 9.958339] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 18.429262] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.429271] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 18.627941] systemd-udevd[1040]: starting version 204
[ 18.673504] CE: hpet increased min_delta_ns to 11521 nsec
[ 18.925404] lp: driver loaded but no devices found
[ 18.941910] ppdev: user-space parallel port driver
[ 18.949118] i2c i2c-3: nForce2 SMBus adapter at 0x1c00
[ 18.949126] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \_SB_.PCI0.SM01 1 (20131115/utaddress-251)
[ 18.949132] ACPI Warning: 0x0000000000001c40-0x0000000000001c7f SystemIO conflicts with Region \_SB_.PCI0.SM00 2 (20131115/utaddress-251)
[ 18.949136] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.954479] parport_pc 00:09: reported by Plug and Play ACPI
[ 18.954508] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 18.983072] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 18.984569] nv_tco: Watchdog reboot not detected
[ 18.984702] nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
[ 19.032971] Bluetooth: Core ver 2.17
[ 19.033006] NET: Registered protocol family 31
[ 19.033008] Bluetooth: HCI device and connection manager initialized
[ 19.033019] Bluetooth: HCI socket layer initialized
[ 19.033022] Bluetooth: L2CAP socket layer initialized
[ 19.033027] Bluetooth: SCO socket layer initialized
[ 19.048179] lp0: using parport0 (interrupt-driven).
[ 19.058628] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 19.058633] Bluetooth: BNEP filters: protocol multicast
[ 19.058645] Bluetooth: BNEP socket layer initialized
[ 19.104093] Bluetooth: RFCOMM TTY layer initialized
[ 19.104112] Bluetooth: RFCOMM socket layer initialized
[ 19.104121] Bluetooth: RFCOMM ver 1.11
[ 19.202331] MCE: In-kernel MCE decoding enabled.
[ 19.224258] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 19.273061] EDAC MC: Ver: 3.0.0
[ 19.334402] AMD64 EDAC driver v3.4.0
[ 19.334585] EDAC amd64: DRAM ECC disabled.
[ 19.334590] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 19.334590] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 19.334590] (Note that use of the override may cause unknown side effects.)
[ 19.376608] device-mapper: multipath: version 1.6.0 loaded
[ 19.537358] init: cups main process (1139) killed by HUP signal
[ 19.537375] init: cups main process ended, respawning
[ 19.592584] kvm: disabled by bios
[ 19.910644] init: failsafe main process (1280) killed by TERM signal
[ 20.010347] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 20.010360] hda_intel: msi for device 1043:81f6 set to 0
[ 20.010388] hda-intel 0000:00:06.1: Disabling 64bit DMA
[ 20.028251] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 20.046071] hda-intel 0000:00:06.1: Enable delay in RIRB handling
[ 20.081170] ice1724: No matching model found for ID 0x12140324
[ 20.704489] init: alsa-restore main process (1632) terminated with status 99
[ 20.980039] autoconfig: line_outs=4 (0x12/0x16/0x24/0x25/0x0) type:line
[ 20.980045] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 20.980047] hp_outs=1 (0x11/0x0/0x0/0x0/0x0)
[ 20.980049] mono: mono_out=0x0
[ 20.980050] dig-out=0x1b/0x0
[ 20.980051] inputs:
[ 20.980054] Front Mic=0x14
[ 20.980055] Rear Mic=0x17
[ 20.980057] Line=0x15
[ 20.980058] CD=0x18
[ 21.028084] forcedeth 0000:00:08.0: irq 43 for MSI/MSI-X
[ 21.028133] forcedeth 0000:00:08.0 eth0: MSI enabled
[ 21.028348] forcedeth 0000:00:08.0 eth0: no link during initialization
[ 21.037106] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.048145] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.079726] forcedeth 0000:00:09.0: irq 44 for MSI/MSI-X
[ 21.079776] forcedeth 0000:00:09.0 eth1: MSI enabled
[ 22.516176] input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:06.1/sound/card0/input9
[ 22.516337] input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:06.1/sound/card0/input8
[ 22.516429] input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:06.1/sound/card0/input7
[ 22.516521] input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:06.1/sound/card0/input6
[ 22.516614] input: HDA NVidia Line as /devices/pci0000:00/0000:00:06.1/sound/card0/input5
[ 22.516760] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:06.1/sound/card0/input4
[ 22.655578] init: plymouth-upstart-bridge main process ended, respawning