webcam Trust αποτυχία με νέο kernel

[mazetas]

Γεια σε όλους. Πιστεύω πως δεν επαναλαμβάνω ειλημμένο θέμα καθώς διάβασα αρκετά νομίζω. Όπως θα δείτε το πρόβλημα το έχω χρόνια, και σίγουρα δε μου έχει φάει λίγες μέρες σε αυτό το διάστημα, προσπαθώντας να το λύσω αλλά άδικα. Αυτή τη φορά είπα να ζητήσω τη δική σας αρωγή.

Είμαι κάτοχος μιας webcam μάρκας Trust, αγορασμένης προ τριετίας, και δε θυμάμαι το μοντέλο της. Μέχρι το kernel 9.10 λειτουργούσε μια χαρά. από την εμφάνιση του Interpid όλα χάλασαν με αυτή τη συσκευή. Αδίκως ήλπιζα πως στην έκδοση 10.04 θα επαναλειτουργεί.

Από lsusb παίρνω αυτό:

Κώδικας: Επιλογή όλων

Bus 002 Device 006: ID 0c45:602c Microdia Clas Ohlson TWC-30XOP Webcam

Η συσκευή εμφανίζεται κανονικά, θεωρητικά λειτουργεί αλλά δε δίνει εικόνα. Με χρήση Cheese, παίρνω κάτι πολύχρωμα μωσαϊκά, ενώ μέσω skype το απόλυτο σκοτάδι. Η κάμερα πάντως λειτουργεί, δλδ ανάβει το φωτάκι της, απλά πρακτικά είναι άχρηστη. Από ότι έχω διαβάσει, το πρόβλημα που παρατηρείται συνήθως με τέτοιου είδους hardware είναι η μη αναγνώρισή του. Σε αυτή την περίπτωση αναγνωρίζεται αλλά υπολειτουργεί. Προσθέτω ότι μέσω XP η κάμερα λειτουργεί κανονικά, άρα δεν πρόκειται για μηχανική βλάβη.

Ελπίζω ο γρίφος για εμένα να μην είναι άλυτος και για εσάς.

[dtrzG]

Νομιζω πως το προβλημα ειναι οτι φορτωνονται 2 οδηγοι ταυτοχρονα.Ποσταρε το αποτελεσμα της εντολες dmesg.

[the_eye]

Δες και εδω
http://ubuntuforums.org/showthread.php?t=242364

[mazetas]

the_eye, αυτό ήταν το τελευταίο που δοκίμασα πριν να απευθυνθώ σε εσάς. Έκανα εγκατάσταση του gspca και έκανα και blacklist 2 αρχεία (blacklist sn9c102, blacklist zc0301) αλλά δεν άλλαξε τπτ. Tο gspca βέβαια μου πέταξε κάτι error αλλά δεν είμαι σίγουρος αν είναι αυτό που ευθύνεται. Επίσης, η μέθοδος αυτή μου φαίνεται κάπως παλιά, καθότι πάνε 3 χρόνια από τότε που δημοσιεύτηκε. Μπορεί από το 2007 να μην έχει διορθωθεί ένα τέτοιο πρόβλημα;

dtrzG, από το dmesg παίρνω αυτό

Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-26-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #48-Ubuntu SMP Wed Nov 24 09:00:03 UTC 2010 (Ubuntu 2.6.32-26.48-generic 2.6.32.24+drm33.11)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 007FF00000 mask FFFFF00000 uncachable
[ 0.000000] 2 base 00E8000000 mask FFF8000000 write-combining
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] modified: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] modified: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37856000 - 37fef7a6
[ 0.000000] Allocated new RAMDISK: 008e1000 - 0107a7a6
[ 0.000000] Move RAMDISK from 0000000037856000 - 0000000037fef7a5 to 008e1000 - 0107a7a5
[ 0.000000] ACPI: RSDP 000f77d0 00014 (v00 VIAK8T)
[ 0.000000] ACPI: RSDT 7fef3040 00034 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fef30c0 00074 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fef3180 04F8A (v01 VIAK8T AWRDACPI 00001000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 7fef0000 00040
[ 0.000000] ACPI: BOOT 7fef8180 00028 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 7fef82c0 000F7 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: APIC 7fef8200 00068 (v01 VIAK8T AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008dced8] TEXT DATA BSS ==> [0000100000 - 00008dced8]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00008dd000 - 00008e00ba] BRK ==> [00008dd000 - 00008e00ba]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e1000 - 000107a7a6] NEW RAMDISK ==> [00008e1000 - 000107a7a6]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f36a0] f36a0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c079a760, node_mem_map c107c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294372 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:7ed00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36056 r0 d21288 u2097152
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-26-generic root=UUID=2a046268-7de0-484d-94d1-2436218fb121 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10480000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fef0)
[ 0.000000] Memory: 2051124k/2096064k available (4682k kernel code, 43444k reserved, 2121k data, 656k init, 1186760k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a5000 - 0xc0849000 ( 656 kB)
[ 0.000000] .data : 0xc0592847 - 0xc07a4e68 (2121 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0592847 (4682 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:424
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2247.189 MHz processor.
[ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 4494.37 BogoMIPS (lpj=8988756)
[ 0.008023] Security Framework initialized
[ 0.008046] AppArmor: AppArmor initialized
[ 0.008053] Mount-cache hash table entries: 512
[ 0.008183] Initializing cgroup subsys ns
[ 0.008187] Initializing cgroup subsys cpuacct
[ 0.008191] Initializing cgroup subsys memory
[ 0.008199] Initializing cgroup subsys devices
[ 0.008201] Initializing cgroup subsys freezer
[ 0.008204] Initializing cgroup subsys net_cls
[ 0.008222] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.008224] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.008228] mce: CPU supports 5 MCE banks
[ 0.008245] Performance Events: AMD PMU driver.
[ 0.008251] ... version: 0
[ 0.008253] ... bit width: 48
[ 0.008255] ... generic registers: 4
[ 0.008257] ... value mask: 0000ffffffffffff
[ 0.008259] ... max period: 00007fffffffffff
[ 0.008261] ... fixed-purpose events: 0
[ 0.008263] ... event mask: 000000000000000f
[ 0.008267] Checking 'hlt' instruction... OK.
[ 0.024675] SMP alternatives: switching to UP code
[ 0.030212] ACPI: Core revision 20090903
[ 0.040029] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.040040] ftrace: allocating 21794 entries in 43 pages
[ 0.044109] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.044941] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.086308] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 0a
[ 0.088001] Brought up 1 CPUs
[ 0.088001] Total of 1 processors activated (4494.37 BogoMIPS).
[ 0.088001] CPU0 attaching NULL sched-domain.
[ 0.088001] devtmpfs: initialized
[ 0.088001] regulator: core version 0.5
[ 0.088001] Time: 1:34:58 Date: 12/03/10
[ 0.088001] NET: Registered protocol family 16
[ 0.088001] EISA bus registered
[ 0.088001] ACPI: bus type pci registered
[ 0.092669] PCI: PCI BIOS revision 2.10 entry at 0xfa090, last bus=1
[ 0.092672] PCI: Using configuration type 1 for base access
[ 0.093503] bio: create slab <bio-0> at 0
[ 0.093995] ACPI: EC: Look up EC in DSDT
[ 0.099309] ACPI: Interpreter enabled
[ 0.099316] ACPI: (supports S0 S3 S4 S5)
[ 0.099340] ACPI: Using IOAPIC for interrupt routing
[ 0.104262] ACPI: No dock devices found.
[ 0.104351] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.104395] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.104619] pci 0000:00:01.0: supports D1
[ 0.104651] pci 0000:00:07.0: reg 10 32bit mmio: [0xfa026000-0xfa0267ff]
[ 0.104657] pci 0000:00:07.0: reg 14 io port: [0xe300-0xe37f]
[ 0.104691] pci 0000:00:07.0: supports D2
[ 0.104693] pci 0000:00:07.0: PME# supported from D2 D3hot D3cold
[ 0.104697] pci 0000:00:07.0: PME# disabled
[ 0.104724] pci 0000:00:08.0: reg 10 32bit mmio: [0xfa020000-0xfa0207ff]
[ 0.104758] pci 0000:00:08.0: supports D1 D2
[ 0.104782] pci 0000:00:09.0: reg 10 32bit mmio: [0xfa021000-0xfa021fff]
[ 0.104814] pci 0000:00:09.0: supports D1 D2
[ 0.104816] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot
[ 0.104819] pci 0000:00:09.0: PME# disabled
[ 0.104843] pci 0000:00:09.1: reg 10 32bit mmio: [0xfa022000-0xfa022fff]
[ 0.104874] pci 0000:00:09.1: supports D1 D2
[ 0.104876] pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot
[ 0.104880] pci 0000:00:09.1: PME# disabled
[ 0.104904] pci 0000:00:09.2: reg 10 32bit mmio: [0xfa023000-0xfa0230ff]
[ 0.104935] pci 0000:00:09.2: supports D1 D2
[ 0.104937] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot
[ 0.104941] pci 0000:00:09.2: PME# disabled
[ 0.104973] pci 0000:00:0e.0: reg 10 io port: [0xd000-0xd0ff]
[ 0.104979] pci 0000:00:0e.0: reg 14 32bit mmio: [0xfa024000-0xfa0240ff]
[ 0.104996] pci 0000:00:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.105010] pci 0000:00:0e.0: supports D1 D2
[ 0.105012] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105015] pci 0000:00:0e.0: PME# disabled
[ 0.105043] pci 0000:00:0f.0: reg 10 io port: [0xe900-0xe907]
[ 0.105049] pci 0000:00:0f.0: reg 14 io port: [0xea00-0xea03]
[ 0.105055] pci 0000:00:0f.0: reg 18 io port: [0xe000-0xe007]
[ 0.105060] pci 0000:00:0f.0: reg 1c io port: [0xe100-0xe103]
[ 0.105066] pci 0000:00:0f.0: reg 20 io port: [0xe200-0xe20f]
[ 0.105072] pci 0000:00:0f.0: reg 24 io port: [0xd400-0xd4ff]
[ 0.105131] pci 0000:00:0f.1: reg 20 io port: [0xe400-0xe40f]
[ 0.105196] pci 0000:00:10.0: reg 20 io port: [0xe500-0xe51f]
[ 0.105215] pci 0000:00:10.0: supports D1 D2
[ 0.105217] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105221] pci 0000:00:10.0: PME# disabled
[ 0.105257] pci 0000:00:10.1: reg 20 io port: [0xe600-0xe61f]
[ 0.105276] pci 0000:00:10.1: supports D1 D2
[ 0.105278] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105281] pci 0000:00:10.1: PME# disabled
[ 0.105317] pci 0000:00:10.2: reg 20 io port: [0xe700-0xe71f]
[ 0.105337] pci 0000:00:10.2: supports D1 D2
[ 0.105339] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105342] pci 0000:00:10.2: PME# disabled
[ 0.105378] pci 0000:00:10.3: reg 20 io port: [0xe800-0xe81f]
[ 0.105398] pci 0000:00:10.3: supports D1 D2
[ 0.105400] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105403] pci 0000:00:10.3: PME# disabled
[ 0.105427] pci 0000:00:10.4: reg 10 32bit mmio: [0xfa025000-0xfa0250ff]
[ 0.105459] pci 0000:00:10.4: supports D1 D2
[ 0.105461] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.105464] pci 0000:00:10.4: PME# disabled
[ 0.105515] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.105560] pci 0000:00:11.5: reg 10 io port: [0xd800-0xd8ff]
[ 0.105597] pci 0000:00:11.5: supports D1 D2
[ 0.105683] pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xf8ffffff]
[ 0.105688] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.105700] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[ 0.105735] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xf9ffffff]
[ 0.105738] pci 0000:00:01.0: bridge 32bit mmio pref: [0xf0000000-0xf7ffffff]
[ 0.105745] pci_bus 0000:00: on NUMA node 0
[ 0.105749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.159740] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *5
[ 0.159879] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
[ 0.160028] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[ 0.160168] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *5
[ 0.160288] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.160401] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.160526] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 *10 11 12)
[ 0.160651] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 *10 11 12)
[ 0.160803] ACPI: PCI Interrupt Link [ALKA] (IRQs *20)
[ 0.160942] ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
[ 0.161081] ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
[ 0.161251] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[ 0.161347] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.161350] vgaarb: loaded
[ 0.161454] SCSI subsystem initialized
[ 0.161522] libata version 3.00 loaded.
[ 0.161585] usbcore: registered new interface driver usbfs
[ 0.161597] usbcore: registered new interface driver hub
[ 0.161617] usbcore: registered new device driver usb
[ 0.161724] ACPI: WMI: Mapper loaded
[ 0.161726] PCI: Using ACPI for IRQ routing
[ 0.161873] NetLabel: Initializing
[ 0.161875] NetLabel: domain hash size = 128
[ 0.161876] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.161889] NetLabel: unlabeled traffic allowed by default
[ 0.163555] AppArmor: AppArmor Filesystem Enabled
[ 0.163573] pnp: PnP ACPI init
[ 0.163588] ACPI: bus type pnp registered
[ 0.166666] pnp: PnP ACPI: found 12 devices
[ 0.166668] ACPI: ACPI bus type pnp unregistered
[ 0.166671] PnPBIOS: Disabled by ACPI PNP
[ 0.166684] system 00:00: iomem range 0xcc800-0xcffff has been reserved
[ 0.166687] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.166690] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.166693] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.166696] system 00:00: iomem range 0x7ff00000-0x7fffffff could not be reserved
[ 0.166699] system 00:00: iomem range 0x7fef0000-0x7fefffff could not be reserved
[ 0.166702] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.166705] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.166708] system 00:00: iomem range 0x100000-0x7feeffff could not be reserved
[ 0.166711] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.166714] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.166717] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.166723] system 00:02: ioport range 0x4000-0x407f has been reserved
[ 0.166726] system 00:02: ioport range 0x5000-0x500f has been reserved
[ 0.166731] system 00:03: ioport range 0xb78-0xb7b has been reserved
[ 0.166734] system 00:03: ioport range 0xf78-0xf7b has been reserved
[ 0.166737] system 00:03: ioport range 0xa78-0xa7b has been reserved
[ 0.166740] system 00:03: ioport range 0xe78-0xe7b has been reserved
[ 0.166742] system 00:03: ioport range 0xbbc-0xbbf has been reserved
[ 0.166745] system 00:03: ioport range 0xfbc-0xfbf has been reserved
[ 0.166748] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.166751] system 00:03: ioport range 0x290-0x297 has been reserved
[ 0.201420] Switching to clocksource acpi_pm
[ 0.201535] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.201538] pci 0000:00:01.0: IO window: disabled
[ 0.201543] pci 0000:00:01.0: MEM window: 0xf8000000-0xf9ffffff
[ 0.201547] pci 0000:00:01.0: PREFETCH window: 0xf0000000-0xf7ffffff
[ 0.201561] pci 0000:00:01.0: setting latency timer to 64
[ 0.201566] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.201569] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.201572] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xf9ffffff]
[ 0.201574] pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf7ffffff]
[ 0.201609] NET: Registered protocol family 2
[ 0.201698] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.202016] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.202788] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.203187] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.203189] TCP reno registered
[ 0.203278] NET: Registered protocol family 1
[ 0.203302] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.203402] pci 0000:01:00.0: Boot video device
[ 0.203487] Simple Boot Flag at 0x37 set to 0x1
[ 0.203601] cpufreq-nforce2: No nForce2 chipset.
[ 0.203631] Scanning for low memory corruption every 60 seconds
[ 0.203730] audit: initializing netlink socket (disabled)
[ 0.203740] type=2000 audit(1291340098.200:1): initialized
[ 0.211332] Trying to unpack rootfs image as initramfs...
[ 0.220231] highmem bounce pool size: 64 pages
[ 0.220238] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.228314] VFS: Disk quotas dquot_6.5.2
[ 0.228404] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.228985] fuse init (API version 7.13)
[ 0.229058] msgmni has been set to 1690
[ 0.229249] alg: No test for stdrng (krng)
[ 0.229296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.229299] io scheduler noop registered
[ 0.229301] io scheduler anticipatory registered
[ 0.229303] io scheduler deadline registered
[ 0.229336] io scheduler cfq registered (default)
[ 0.229458] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.229478] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.229562] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.229566] ACPI: Power Button [PWRB]
[ 0.229618] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.229621] ACPI: Power Button [PWRF]
[ 0.229898] processor LNXCPU:00: registered as cooling_device0
[ 0.236483] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.236579] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.236885] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.237836] brd: module loaded
[ 0.238268] loop: module loaded
[ 0.238352] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.238707] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 0.238713] alloc irq_desc for 20 on node -1
[ 0.238715] alloc kstat_irqs on node -1
[ 0.238723] pata_acpi 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 0.238775] pata_acpi 0000:00:0f.1: PCI INT A disabled
[ 0.239054] Fixed MDIO Bus: probed
[ 0.239085] PPP generic driver version 2.4.2
[ 0.239116] tun: Universal TUN/TAP device driver, 1.6
[ 0.239118] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.239191] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.239205] alloc irq_desc for 19 on node -1
[ 0.239207] alloc kstat_irqs on node -1
[ 0.239211] ehci_hcd 0000:00:09.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 0.239228] ehci_hcd 0000:00:09.2: EHCI Host Controller
[ 0.239256] ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1
[ 0.239324] isapnp: Scanning for PnP cards...
[ 0.295825] ehci_hcd 0000:00:09.2: irq 19, io mem 0xfa023000
[ 0.304328] ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 1.00
[ 0.304454] usb usb1: configuration #1 chosen from 1 choice
[ 0.304487] hub 1-0:1.0: USB hub found
[ 0.304498] hub 1-0:1.0: 5 ports detected
[ 0.304568] alloc irq_desc for 21 on node -1
[ 0.304570] alloc kstat_irqs on node -1
[ 0.304578] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.304597] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.304631] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
[ 0.304693] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfa025000
[ 0.316164] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.316297] usb usb2: configuration #1 chosen from 1 choice
[ 0.316329] hub 2-0:1.0: USB hub found
[ 0.316340] hub 2-0:1.0: 8 ports detected
[ 0.316406] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.316429] alloc irq_desc for 17 on node -1
[ 0.316431] alloc kstat_irqs on node -1
[ 0.316438] ohci_hcd 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.316456] ohci_hcd 0000:00:09.0: OHCI Host Controller
[ 0.316491] ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3
[ 0.316533] ohci_hcd 0000:00:09.0: irq 17, io mem 0xfa021000
[ 0.444360] usb usb3: configuration #1 chosen from 1 choice
[ 0.444390] hub 3-0:1.0: USB hub found
[ 0.444402] hub 3-0:1.0: 3 ports detected
[ 0.444457] alloc irq_desc for 18 on node -1
[ 0.444459] alloc kstat_irqs on node -1
[ 0.444466] ohci_hcd 0000:00:09.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 0.444487] ohci_hcd 0000:00:09.1: OHCI Host Controller
[ 0.444527] ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 4
[ 0.444570] ohci_hcd 0000:00:09.1: irq 18, io mem 0xfa022000
[ 0.560304] usb usb4: configuration #1 chosen from 1 choice
[ 0.560334] hub 4-0:1.0: USB hub found
[ 0.560348] hub 4-0:1.0: 2 ports detected
[ 0.560402] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.560457] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.560466] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.560501] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 0.560525] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e500
[ 0.560613] usb usb5: configuration #1 chosen from 1 choice
[ 0.560635] hub 5-0:1.0: USB hub found
[ 0.560643] hub 5-0:1.0: 2 ports detected
[ 0.560687] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.560692] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.560723] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 6
[ 0.560741] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e600
[ 0.560822] usb usb6: configuration #1 chosen from 1 choice
[ 0.560843] hub 6-0:1.0: USB hub found
[ 0.560850] hub 6-0:1.0: 2 ports detected
[ 0.560889] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.560894] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.560926] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 7
[ 0.560944] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e700
[ 0.561025] usb usb7: configuration #1 chosen from 1 choice
[ 0.561046] hub 7-0:1.0: USB hub found
[ 0.561054] hub 7-0:1.0: 2 ports detected
[ 0.561094] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.561099] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.561126] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 8
[ 0.561144] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e800
[ 0.561224] usb usb8: configuration #1 chosen from 1 choice
[ 0.561246] hub 8-0:1.0: USB hub found
[ 0.561253] hub 8-0:1.0: 2 ports detected
[ 0.561329] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.561332] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.561996] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.562097] mice: PS/2 mouse device common for all mice
[ 0.562203] rtc_cmos 00:05: RTC can wake from S4
[ 0.562241] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.562292] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.562391] device-mapper: uevent: version 1.0.3
[ 0.564232] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.564926] device-mapper: multipath: version 1.1.0 loaded
[ 0.564929] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.568262] EISA: Probing bus 0 at eisa.0
[ 0.568282] Cannot allocate resource for EISA slot 4
[ 0.568284] Cannot allocate resource for EISA slot 5
[ 0.568297] EISA: Detected 0 cards.
[ 0.568366] cpuidle: using governor ladder
[ 0.568368] cpuidle: using governor menu
[ 0.568755] TCP cubic registered
[ 0.568910] NET: Registered protocol family 10
[ 0.569349] lo: Disabled Privacy Extensions
[ 0.569657] NET: Registered protocol family 17
[ 0.569689] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+ processors (1 cpu cores) (version 2.20.00)
[ 0.569741] powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x2
[ 0.569743] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x6
[ 0.569745] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
[ 0.569748] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 0.569786] Using IPI No-Shortcut mode
[ 0.569877] PM: Resume from disk failed.
[ 0.569896] registered taskstats version 1
[ 0.570226] Magic number: 6:393:558
[ 0.570268] misc vga_arbiter: hash matches
[ 0.570276] pci_link PNP0C0F:09: hash matches
[ 0.570327] rtc_cmos 00:05: setting system clock to 2010-12-03 01:34:59 UTC (1291340099)
[ 0.570330] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.570332] EDD information not available.
[ 0.576531] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.712548] Freeing initrd memory: 7781k freed
[ 0.805391] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 0.848959] isapnp: No Plug & Play device found
[ 0.848974] Freeing unused kernel memory: 656k freed
[ 0.849523] Write protecting the kernel text: 4684k
[ 0.849550] Write protecting the kernel read-only data: 1840k
[ 0.869271] udev: starting version 151
[ 0.981420] usb 2-1: configuration #1 chosen from 1 choice
[ 0.981720] hub 2-1:1.0: USB hub found
[ 0.982060] hub 2-1:1.0: 4 ports detected
[ 1.064884] pata_via 0000:00:0f.1: version 0.3.4
[ 1.064906] pata_via 0000:00:0f.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 1.084829] scsi0 : pata_via
[ 1.085200] scsi1 : pata_via
[ 1.086677] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 1.086680] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 1.086764] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14
[ 1.086766] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
[ 1.086768] Copyright (c) 2004 Red Hat Inc.
[ 1.086783] alloc irq_desc for 22 on node -1
[ 1.086785] alloc kstat_irqs on node -1
[ 1.086793] via-velocity 0000:00:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 1.087965] eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
[ 1.087969] eth0: Ethernet Address: 00:50:8D:D1:6C:A2
[ 1.090387] Floppy drive(s): fd0 is 1.44M
[ 1.092064] usb 2-2: new high speed USB device using ehci_hcd and address 3
[ 1.100049] sata_via 0000:00:0f.0: version 2.4
[ 1.100069] sata_via 0000:00:0f.0: PCI INT B -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 1.100107] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 1.100265] scsi2 : sata_via
[ 1.100363] scsi3 : sata_via
[ 1.100409] ata3: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xe200 irq 20
[ 1.100412] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xe100 bmdma 0xe208 irq 20
[ 1.107780] FDC 0 is a post-1991 82077
[ 1.241028] usb 2-2: configuration #1 chosen from 1 choice
[ 1.249394] Initializing USB Mass Storage driver...
[ 1.249523] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.249646] usbcore: registered new interface driver usb-storage
[ 1.249648] USB Mass Storage support registered.
[ 1.249723] usb-storage: device found at 3
[ 1.249725] usb-storage: waiting for device to settle before scanning
[ 1.252453] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 2.00, max UDMA/66
[ 1.268303] ata1.00: configured for UDMA/66
[ 1.270306] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NP20 2.00 PQ: 0 ANSI: 5
[ 1.273732] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.273736] Uniform CD-ROM driver Revision: 3.20
[ 1.273947] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.274060] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.304015] ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.424015] usb 3-3: new low speed USB device using ohci_hcd and address 2
[ 1.444543] ata2.00: ATA-7: Maxtor 6Y060L0, YAR41VW0, max UDMA/133
[ 1.444546] ata2.00: 120103200 sectors, multi 16: LBA
[ 1.444741] ata2.01: ATA-5: MAXTOR 6L080J4, A93.0500, max UDMA/133
[ 1.444744] ata2.01: 156355584 sectors, multi 16: LBA
[ 1.460393] ata2.00: configured for UDMA/133
[ 1.476406] ata2.01: configured for UDMA/133
[ 1.476486] scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y060L0 YAR4 PQ: 0 ANSI: 5
[ 1.476602] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.476809] scsi 1:0:1:0: Direct-Access ATA MAXTOR 6L080J4 A93. PQ: 0 ANSI: 5
[ 1.476919] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 1.477022] sd 1:0:1:0: [sdb] 156355584 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.477063] sd 1:0:1:0: [sdb] Write Protect is off
[ 1.477065] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.477087] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.477310] sdb: sdb1 sdb2 <
[ 1.493562] sd 1:0:0:0: [sda] 120103200 512-byte logical blocks: (61.4 GB/57.2 GiB)
[ 1.509209] sdb5 sdb6 > sdb3
[ 1.519014] sd 1:0:0:0: [sda] Write Protect is off
[ 1.519017] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.519037] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.519145] sda: sda1 sda2 <
[ 1.555212] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 1.555229] >
[ 1.555577] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.637471] usb 3-3: configuration #1 chosen from 1 choice
[ 1.680017] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.702000] alloc irq_desc for 23 on node -1
[ 1.702004] alloc kstat_irqs on node -1
[ 1.702013] ohci1394 0000:00:07.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.705012] usbcore: registered new interface driver hiddev
[ 1.710686] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:09.0/usb3/3-3/3-3:1.0/input/input4
[ 1.710793] generic-usb 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:09.0-3/input0
[ 1.710821] usbcore: registered new interface driver usbhid
[ 1.710824] usbhid: v2.6:USB HID core driver
[ 1.716318] usb 2-1.1: new high speed USB device using ehci_hcd and address 4
[ 1.758104] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[23] MMIO=[fa026000-fa0267ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.809386] usb 2-1.1: configuration #1 chosen from 1 choice
[ 1.809716] hub 2-1.1:1.0: USB hub found
[ 1.810039] hub 2-1.1:1.0: 4 ports detected
[ 1.884308] usb 2-1.4: new full speed USB device using ehci_hcd and address 5
[ 1.978395] usb 2-1.4: configuration #1 chosen from 1 choice
[ 2.080297] usb 2-1.1.2: new high speed USB device using ehci_hcd and address 6
[ 2.173386] usb 2-1.1.2: configuration #1 chosen from 1 choice
[ 2.175500] scsi5 : SCSI emulation for USB Mass Storage devices
[ 2.175746] usb-storage: device found at 6
[ 2.175747] usb-storage: waiting for device to settle before scanning
[ 2.248292] usb 2-1.1.3: new full speed USB device using ehci_hcd and address 7
[ 2.322127] EXT4-fs (sdb6): mounted filesystem with ordered data mode
[ 2.341137] usb 2-1.1.3: configuration #1 chosen from 1 choice
[ 3.036126] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00508d0000d06ca2]
[ 6.248204] usb-storage: device scan complete
[ 7.172285] usb-storage: device scan complete
[ 7.172760] scsi 5:0:0:0: Direct-Access SanDisk Sansa Clip 2GB v02. PQ: 0 ANSI: 0
[ 8.283232] scsi 4:0:0:0: Direct-Access Samsung S2 Portable PQ: 0 ANSI: 2 CCS
[ 8.283606] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 8.283785] sd 5:0:0:0: Attached scsi generic sg4 type 0
[ 8.284452] sd 5:0:0:0: [sdd] 3801088 512-byte logical blocks: (1.94 GB/1.81 GiB)
[ 8.284949] sd 5:0:0:0: [sdd] Write Protect is off
[ 8.284952] sd 5:0:0:0: [sdd] Mode Sense: 04 00 00 00
[ 8.284954] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 8.286573] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 8.286576] sdd:
[ 8.290324] sd 5:0:0:0: [sdd] Assuming drive cache: write through
[ 8.290326] sd 5:0:0:0: [sdd] Attached SCSI removable disk
[ 10.990494] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 10.991237] sd 4:0:0:0: [sdc] Write Protect is off
[ 10.991240] sd 4:0:0:0: [sdc] Mode Sense: 34 00 00 00
[ 10.991242] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 10.992735] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 10.992739] sdc: sdc1
[ 11.073356] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[ 11.073359] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 14.545137] udev: starting version 151
[ 14.612975] Adding 2048248k swap on /dev/sdb5. Priority:-1 extents:1 across:2048248k
[ 14.768100] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.777867] Linux agpgart interface v0.103
[ 14.831576] Linux video capture interface: v2.00
[ 15.007745] parport_pc 00:0a: reported by Plug and Play ACPI
[ 15.007797] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 15.011611] vga16fb: initializing
[ 15.011616] vga16fb: mapped to 0xc00a0000
[ 15.011688] fb0: VGA16 VGA frame buffer device
[ 15.012069] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282]
[ 15.090862] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe8000000
[ 15.108988] lp0: using parport0 (interrupt-driven).
[ 15.224083] nvidia: module license 'NVIDIA' taints kernel.
[ 15.224088] Disabling lock debugging due to kernel taint
[ 15.422627] type=1505 audit(1291340114.349:2): operation="profile_load" pid=629 name="/sbin/dhclient3"
[ 15.422887] type=1505 audit(1291340114.349:3): operation="profile_load" pid=629 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 15.423032] type=1505 audit(1291340114.349:4): operation="profile_load" pid=629 name="/usr/lib/connman/scripts/dhclient-script"
[ 15.860940] Bluetooth: Core ver 2.15
[ 15.865054] NET: Registered protocol family 31
[ 15.865058] Bluetooth: HCI device and connection manager initialized
[ 15.865062] Bluetooth: HCI socket layer initialized
[ 15.874311] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 15.874669] usbcore: registered new interface driver btusb
[ 15.894836] gspca: main v2.7.0 registered
[ 15.907139] ppdev: user-space parallel port driver
[ 15.913265] gspca: probing 0c45:602c
[ 15.914590] gspca: probe ok
[ 15.914616] usbcore: registered new interface driver sonixb
[ 15.914654] sonixb: registered
[ 16.028827] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 16.028877] alloc irq_desc for 16 on node -1
[ 16.028880] alloc kstat_irqs on node -1
[ 16.028887] saa7134 0000:00:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.028896] saa7133[0]: found at 0000:00:08.0, rev: 209, irq: 16, latency: 32, mmio: 0xfa020000
[ 16.028903] saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 Hybrid [card=112,autodetected]
[ 16.028921] saa7133[0]: board init: gpio is 0
[ 16.029127] input: saa7134 IR (ASUSTeK P7131 Hybri as /devices/pci0000:00/0000:00:08.0/input/input5
[ 16.029258] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 16.209221] saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 16.209229] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 16.209235] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d5 ff ff ff ff
[ 16.209240] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209245] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 50 ff ff ff ff ff ff
[ 16.209251] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209256] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209261] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209266] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209272] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209277] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209282] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209287] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209293] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209298] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209303] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 16.209311] i2c i2c-1: Invalid 7-bit address 0x7a
[ 16.215428] Console: switching to colour frame buffer device 80x30
[ 16.227832] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.227843] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 16.228989] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.17 Thu Apr 15 05:28:41 PDT 2010
[ 16.276143] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[ 16.356103] tda829x 1-004b: setting tuner address to 61
[ 16.436014] tda829x 1-004b: type set to tda8290+75a
[ 20.360150] saa7133[0]: registered device video1 [v4l2]
[ 20.360176] saa7133[0]: registered device vbi0
[ 20.360199] saa7133[0]: registered device radio0
[ 20.360635] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 20.360791] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 20.376533] saa7134 ALSA driver for DMA sound loaded
[ 20.376548] IRQ 16/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 20.376569] saa7133[0]/alsa: saa7133[0] at 0xfa020000 irq 16 registered as card -2
[ 20.443602] dvb_init() allocating 1 frontend
[ 20.636148] DVB: registering new adapter (saa7133[0])
[ 20.636156] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 20.748022] tda1004x: setting up plls for 48MHz sampling clock
[ 21.132015] tda1004x: found firmware revision 29 -- ok
[ 21.297779] EXT4-fs (sdb3): mounted filesystem with ordered data mode
[ 21.544201] type=1505 audit(1291340120.473:5): operation="profile_replace" pid=887 name="/sbin/dhclient3"
[ 21.544479] type=1505 audit(1291340120.473:6): operation="profile_replace" pid=887 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 21.544630] type=1505 audit(1291340120.473:7): operation="profile_replace" pid=887 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.554174] type=1505 audit(1291340120.481:8): operation="profile_load" pid=889 name="/usr/lib/cups/backend/cups-pdf"
[ 21.554500] type=1505 audit(1291340120.481:9): operation="profile_load" pid=889 name="/usr/sbin/cupsd"
[ 21.562082] type=1505 audit(1291340120.489:10): operation="profile_load" pid=890 name="/usr/sbin/mysqld-akonadi"
[ 21.565490] type=1505 audit(1291340120.493:11): operation="profile_load" pid=891 name="/usr/sbin/tcpdump"
[ 21.638838] Velocity is AUTO mode
[ 21.898868] agpgart-amd64 0000:00:00.0: AGP 3.0 bridge
[ 21.898882] agpgart-amd64 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 21.898887] agpgart-amd64 0000:00:00.0: putting AGP V2 device into 4x mode
[ 21.898962] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
[ 22.055233] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 22.055239] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hardware performance
[ 22.055240] vboxdrv: counter framework which can generate NMIs is active. You have to prevent
[ 22.055242] vboxdrv: the usage of hardware performance counters by
[ 22.055243] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid
[ 22.055247] vboxdrv: Found 1 processor cores.
[ 22.057609] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 22.057613] vboxdrv: Successfully loaded version 3.1.6_OSE (interface 0x00100001).
[ 22.155084] Bluetooth: L2CAP ver 2.14
[ 22.155089] Bluetooth: L2CAP socket layer initialized
[ 22.165249] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.165254] Bluetooth: BNEP filters: protocol multicast
[ 22.177929] Bridge firewalling registered
[ 22.197916] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.197920] Bluetooth: SCO socket layer initialized
[ 22.744540] Bluetooth: RFCOMM TTY layer initialized
[ 22.744548] Bluetooth: RFCOMM socket layer initialized
[ 22.744551] Bluetooth: RFCOMM ver 1.11
[ 23.203844] eth0: Link auto-negotiation speed 100M bps full duplex
[ 31.984009] eth0: no IPv6 routers present
[ 52.223545] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[ 53.584025] Clocksource tsc unstable (delta = -63219467 ns)
[ 128.196258] gspca: usb_submit_urb alt 8 err -28
[36930.393023] lo: Disabled Privacy Extensions


Eίναι αρκετά ογκώδες και δεν ξέρω αν σε βοηθάει ή σε κουράζει, είναι η αλήθεια, αλλά δε γνωρίζω ποιο κομμάτι πιθανώς να σε ενδιαφέρει για να το ξεχωρίσω. Εάν το πρόβλημα έγκειται στο ότι φορτώνονται πολλοί drivers, τότε ίσως με τη χρήση του gspca να προκάλεσα βλάβη, αλλά τπτ διαφορετικό δεν είδα. Επίσης προχθές δοκίμασα να εγκαταστήσω τα codecs v4l που δεν είχα παλιότερα.

Spoiler: show

Παραθέτω και το lsmod, τρεγμένο μετά τη χρήση του gspca, σε περίπτωση που βοηθάει

Κώδικας: Επιλογή όλων

lsmod | head -n 6
Module Size Used by
nls_iso8859_1 3249 2
nls_cp437 4919 2
vfat 8933 2
fat 47767 1 vfat
binfmt_misc 6587 1


[idomeneas]

Εχεις και κάρτα τηλεόρασης στο μηχάνημα σου ; Ισως αυτό να φταίει που δε βλέπεις από τα προγράμματα για την κάμερα

[mazetas]

Εχεις και κάρτα τηλεόρασης στο μηχάνημα σου ; Ισως αυτό να φταίει που δε βλέπεις από τα προγράμματα για την κάμερα

Πως μπορεί να επηρεάζει αυτό την κάμερα; μέσω skype για παράδειγμα, μου δίνει τη δυνατότητα να επιλέξω με ποια συσκευή θέλω να κάνω λήψη εικόνας, άρα δε θα πρεπε να μπλέκονται. Το cheese από την άλλη, απλά το tv-tuner δεν το αγγίζει. Πάντως και η κάρτα τηλεόρασης δε λειτουργεί, παρά τις όποιες ρυθμίσεις έχω κάνει με το tvtime.

[mazetas]

Ας αναφέρω για όποιον μελλοντικό αναγνώστη του νήματος ενδιαφέρεται, πως λύση βρέθηκε. Όχι ίσως με τον πιο επιθυμητό τρόπο, αλλά βρέθηκε. Αγόρασα μια καινούρια webcam για την οποία είχα δει σε forum πως έχει μια χαρά λειτουργία σε Ubuntu, κι έτσι τώρα μπορώ να αποφεύγω το switching λειτουργικών συστημάτων γι αυτό το λόγο.
Μακάρι να μπορέσω κάποια στιγμή σε δοκιμαστικό pc, να βρω και μια software λύση για την παλιά μου webcam.

Για όποιον μπορεί να έχει απορία για το τι κάμερα πήρα, και προς αποφυγή διαφημίσεως, ας δει το spoiler

Spoiler: show

Logitech C270