Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype

από **ph03nix** » 29 Δεκ 2010, 03:48

Γεια χαρά σε όλους κ χρόνια πολλά!Έχω πρόβλημα με την ενσωματωμένη cam μ στο laptop!Δεν λειτουργεί ούτε στο cheese ούτε στο skype!Στο cheese μ βγάζει κάτι μπάρες με χρώματα και

Κώδικας: Επιλογή όλων: No camera found

Χτες δούλευε κανονικά στο cheese κ στο skype!

η lspci δείνει

Spoiler: show

Κώδικας: Επιλογή όλων: 00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2) 00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2) 00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2) 00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1) 00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1) 00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2) 00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2) 00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2) 00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2) 00:12.0 VGA compatible controller: nVidia Corporation C67 [GeForce 7000M / nForce 610M] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:04.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 01:04.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 01:04.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 01:04.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 05:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)

από **the_eye** » 29 Δεκ 2010, 06:14

Δώσε και το lsusb, αν και εσωτερική η κάμερα πολλές φορές έχουν εσωτερική usb διασύνδεση.

από **xaris2335** » 29 Δεκ 2010, 12:01

επίσης δώσε αποτέλεσμα

Κώδικας: Επιλογή όλων: lsmod dmesg

από **ph03nix** » 29 Δεκ 2010, 23:58

Λοιπόν:

lsusb:

Spoiler: show

lsmod:

Spoiler: show

Κώδικας: Επιλογή όλων: Module Size Used by nls_iso8859_1 3740 1 nls_cp437 5372 1 vfat 10716 1 fat 51452 1 vfat aes_i586 8124 1 aes_generic 27484 1 aes_i586 binfmt_misc 8356 1 ppdev 6688 0 joydev 10240 0 uvcvideo 59080 0 videodev 36736 1 uvcvideo v4l1_compat 14336 2 uvcvideo,videodev iptable_filter 3100 0 ip_tables 11692 1 iptable_filter x_tables 16544 1 ip_tables psmouse 57332 0 serio_raw 5280 0 arc4 1660 2 ecb 2524 2 snd_hda_codec_realtek 203328 1 snd_hda_intel 27016 4 snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 7200 1 snd_hda_codec snd_pcm_oss 37920 0 snd_mixer_oss 16028 1 snd_pcm_oss snd_pcm 75296 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 2656 0 snd_seq_oss 28608 0 ath5k 124772 0 mac80211 181140 1 ath5k snd_seq_midi 6464 0 ath 8060 1 ath5k snd_rawmidi 22176 1 snd_seq_midi snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi ricoh_mmc 3676 0 snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 22276 2 snd_pcm,snd_seq snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq acer_wmi 15936 0 sdhci_pci 7100 0 sdhci 17504 1 sdhci_pci led_class 4096 3 ath5k,acer_wmi,sdhci cfg80211 93052 3 ath5k,mac80211,ath snd 59236 19 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 7264 1 snd snd_page_alloc 9156 2 snd_hda_intel,snd_pcm k8temp 4188 0 i2c_nforce2 6784 0 lp 8964 0 parport 35340 2 ppdev,lp lirc_ene0100 8096 0 lirc_dev 10804 1 lirc_ene0100 usb_storage 52768 2 usbhid 38208 0 ohci1394 29900 0 ieee1394 86596 1 ohci1394 video 19380 0 output 2780 1 video forcedeth 54152 0

dmesg:

Spoiler: show

Κώδικας: Επιλογή όλων: [ 0.249180] pci 0000:01:04.4: supports D1 D2 [ 0.249183] pci 0000:01:04.4: PME# supported from D0 D1 D2 D3hot D3cold [ 0.249187] pci 0000:01:04.4: PME# disabled [ 0.249221] pci 0000:00:08.0: transparent bridge [ 0.249226] pci 0000:00:08.0: bridge 32bit mmio: [0xd0500000-0xd05fffff] [ 0.249266] pci 0000:00:0c.0: bridge io port: [0x4000-0x4fff] [ 0.249269] pci 0000:00:0c.0: bridge 32bit mmio: [0xd0200000-0xd03fffff] [ 0.249274] pci 0000:00:0c.0: bridge 64bit mmio pref: [0xd0000000-0xd01fffff] [ 0.249311] pci 0000:05:00.0: reg 10 64bit mmio: [0xd0400000-0xd040ffff] [ 0.249400] pci 0000:00:0d.0: bridge 32bit mmio: [0xd0400000-0xd04fffff] [ 0.249410] pci_bus 0000:00: on NUMA node 0 [ 0.249415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.249511] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT] [ 0.249533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT] [ 0.249564] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT] [ 0.277593] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 11) *10 [ 0.277785] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 *11) [ 0.277972] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 11) *0, disabled. [ 0.278159] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 11) *0, disabled. [ 0.278346] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled. [ 0.278532] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled. [ 0.278718] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled. [ 0.278904] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10 [ 0.279089] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10 [ 0.279276] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *11 [ 0.279463] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *7 [ 0.279655] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11 [ 0.279843] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.280042] ACPI: PCI Interrupt Link [LGPU] (IRQs 17) *10 [ 0.280228] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled. [ 0.280416] ACPI: PCI Interrupt Link [LSI0] (IRQs 20 21 22 23) *5 [ 0.280608] ACPI: PCI Interrupt Link [Z00N] (IRQs 20 21 22 23) *10 [ 0.280800] ACPI: PCI Interrupt Link [Z00O] (IRQs 20 21 22 23) *11 [ 0.280987] ACPI: PCI Interrupt Link [LPMU] (IRQs 18) *11 [ 0.281193] SCSI subsystem initialized [ 0.284035] libata version 3.00 loaded. [ 0.284055] usbcore: registered new interface driver usbfs [ 0.284055] usbcore: registered new interface driver hub [ 0.284059] usbcore: registered new device driver usb [ 0.284147] ACPI: WMI: Mapper loaded [ 0.284149] PCI: Using ACPI for IRQ routing [ 0.296023] Bluetooth: Core ver 2.15 [ 0.300015] NET: Registered protocol family 31 [ 0.300017] Bluetooth: HCI device and connection manager initialized [ 0.300021] Bluetooth: HCI socket layer initialized [ 0.300023] NetLabel: Initializing [ 0.300025] NetLabel: domain hash size = 128 [ 0.300027] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.300041] NetLabel: unlabeled traffic allowed by default [ 0.300075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31 [ 0.300081] hpet0: 3 comparators, 32-bit 25.000000 MHz counter [ 0.312022] Switched to high resolution mode on CPU 0 [ 0.312037] Switched to high resolution mode on CPU 1 [ 0.317029] pnp: PnP ACPI init [ 0.317046] ACPI: bus type pnp registered [ 0.353918] pnp: PnP ACPI: found 13 devices [ 0.353921] ACPI: ACPI bus type pnp unregistered [ 0.353925] PnPBIOS: Disabled by ACPI PNP [ 0.353937] system 00:01: ioport range 0x360-0x361 has been reserved [ 0.353941] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.353950] system 00:07: iomem range 0xe0000000-0xefffffff has been reserved [ 0.353957] system 00:0a: ioport range 0x1000-0x107f has been reserved [ 0.353961] system 00:0a: ioport range 0x1080-0x10ff has been reserved [ 0.353964] system 00:0a: ioport range 0x1400-0x147f has been reserved [ 0.353968] system 00:0a: ioport range 0x1480-0x14ff has been reserved [ 0.353971] system 00:0a: ioport range 0x1800-0x187f has been reserved [ 0.353975] system 00:0a: ioport range 0x1880-0x18ff has been reserved [ 0.353981] system 00:0c: iomem range 0xffc00000-0xffffffff could not be reserved [ 0.353985] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.353989] system 00:0c: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.353993] system 00:0c: iomem range 0xfed00000-0xfed00fff has been reserved [ 0.353997] system 00:0c: iomem range 0xfef00000-0xfef00fff has been reserved [ 0.388674] AppArmor: AppArmor Filesystem Enabled [ 0.388711] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.388713] pci 0000:00:08.0: IO window: disabled [ 0.388718] pci 0000:00:08.0: MEM window: 0xd0500000-0xd05fffff [ 0.388721] pci 0000:00:08.0: PREFETCH window: disabled [ 0.388725] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03 [ 0.388729] pci 0000:00:0c.0: IO window: 0x4000-0x4fff [ 0.388733] pci 0000:00:0c.0: MEM window: 0xd0200000-0xd03fffff [ 0.388737] pci 0000:00:0c.0: PREFETCH window: 0x000000d0000000-0x000000d01fffff [ 0.388742] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:05 [ 0.388744] pci 0000:00:0d.0: IO window: disabled [ 0.388748] pci 0000:00:0d.0: MEM window: 0xd0400000-0xd04fffff [ 0.388751] pci 0000:00:0d.0: PREFETCH window: disabled [ 0.388760] pci 0000:00:08.0: setting latency timer to 64 [ 0.388766] pci 0000:00:0c.0: setting latency timer to 64 [ 0.388772] pci 0000:00:0d.0: setting latency timer to 64 [ 0.388776] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.388780] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.388783] pci_bus 0000:01: resource 1 mem: [0xd0500000-0xd05fffff] [ 0.388786] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.388789] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.388793] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff] [ 0.388796] pci_bus 0000:03: resource 1 mem: [0xd0200000-0xd03fffff] [ 0.388799] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xd01fffff] [ 0.388803] pci_bus 0000:05: resource 1 mem: [0xd0400000-0xd04fffff] [ 0.388842] NET: Registered protocol family 2 [ 0.388942] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.389305] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.389958] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.390293] TCP: Hash tables configured (established 131072 bind 65536) [ 0.390297] TCP reno registered [ 0.390387] NET: Registered protocol family 1 [ 0.390451] Trying to unpack rootfs image as initramfs... [ 0.608229] Freeing initrd memory: 7471k freed [ 0.612816] Simple Boot Flag at 0x36 set to 0x1 [ 0.613021] cpufreq-nforce2: No nForce2 chipset. [ 0.613049] Scanning for low memory corruption every 60 seconds [ 0.613148] audit: initializing netlink socket (disabled) [ 0.613162] type=2000 audit(1293638380.613:1): initialized [ 0.622814] highmem bounce pool size: 64 pages [ 0.622820] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.624320] VFS: Disk quotas dquot_6.5.2 [ 0.624383] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.624936] fuse init (API version 7.12) [ 0.625045] msgmni has been set to 1712 [ 0.625323] alg: No test for stdrng (krng) [ 0.625338] io scheduler noop registered [ 0.625341] io scheduler anticipatory registered [ 0.625343] io scheduler deadline registered [ 0.625390] io scheduler cfq registered (default) [ 0.625537] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.625590] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.625649] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.625715] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.625784] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.625858] pci 0000:00:00.0: Found enabled HT MSI Mapping [ 0.625865] pci 0000:00:12.0: Boot video device [ 0.625981] alloc irq_desc for 24 on node -1 [ 0.625984] alloc kstat_irqs on node -1 [ 0.625993] pcieport-driver 0000:00:0c.0: irq 24 for MSI/MSI-X [ 0.625999] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.626075] alloc irq_desc for 25 on node -1 [ 0.626077] alloc kstat_irqs on node -1 [ 0.626082] pcieport-driver 0000:00:0d.0: irq 25 for MSI/MSI-X [ 0.626087] pcieport-driver 0000:00:0d.0: setting latency timer to 64 [ 0.626148] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.626174] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.644392] ACPI: AC Adapter [ACAD] (on-line) [ 0.644462] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.644466] ACPI: Power Button [PWRF] [ 0.644518] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.665847] ACPI: Lid Switch [LID] [ 0.665898] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 [ 0.665901] ACPI: Sleep Button [SLPB] [ 0.665963] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 [ 0.665966] ACPI: Power Button [PWRB] [ 0.666298] ACPI: processor limited to max C-state 1 [ 0.666348] processor LNXCPU:00: registered as cooling_device0 [ 0.666353] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.666402] processor LNXCPU:01: registered as cooling_device1 [ 0.776918] ACPI: Invalid active0 threshold [ 0.807731] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.807739] ACPI: Thermal Zone [THRM] (78 C) [ 0.807798] isapnp: Scanning for PnP cards... [ 0.824322] ACPI: EC: GPE storm detected, transactions will use polling mode [ 1.160489] isapnp: No Plug & Play device found [ 1.161788] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.163058] brd: module loaded [ 1.163528] loop: module loaded [ 1.163615] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.163700] ahci 0000:00:09.0: version 3.0 [ 1.164044] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23 [ 1.164050] alloc irq_desc for 23 on node -1 [ 1.164052] alloc kstat_irqs on node -1 [ 1.164063] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23 [ 1.164095] alloc irq_desc for 26 on node -1 [ 1.164097] alloc kstat_irqs on node -1 [ 1.164104] ahci 0000:00:09.0: irq 26 for MSI/MSI-X [ 1.164110] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ [ 1.164170] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode [ 1.164175] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio slum part [ 1.164179] ahci 0000:00:09.0: setting latency timer to 64 [ 1.164625] scsi0 : ahci [ 1.164754] scsi1 : ahci [ 1.164826] scsi2 : ahci [ 1.164893] scsi3 : ahci [ 1.164995] ata1: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884100 irq 26 [ 1.164999] ata2: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884180 irq 26 [ 1.165014] ata3: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884200 irq 26 [ 1.165018] ata4: SATA max UDMA/133 abar m8192@0xd0884000 port 0xd0884280 irq 26 [ 1.165279] pata_amd 0000:00:06.0: version 0.4.1 [ 1.165322] pata_amd 0000:00:06.0: setting latency timer to 64 [ 1.165405] scsi4 : pata_amd [ 1.165475] scsi5 : pata_amd [ 1.165851] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14 [ 1.165854] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15 [ 1.166641] Fixed MDIO Bus: probed [ 1.166682] PPP generic driver version 2.4.2 [ 1.166788] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.167106] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22 [ 1.167111] alloc irq_desc for 22 on node -1 [ 1.167114] alloc kstat_irqs on node -1 [ 1.167124] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22 [ 1.167141] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 1.167144] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 1.167178] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 1.167205] ehci_hcd 0000:00:02.1: debug port 1 [ 1.167210] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 1.167232] ehci_hcd 0000:00:02.1: irq 22, io mem 0xd0889000 [ 1.176035] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 1.176116] usb usb1: configuration #1 chosen from 1 choice [ 1.176146] hub 1-0:1.0: USB hub found [ 1.176155] hub 1-0:1.0: 5 ports detected [ 1.176495] ACPI: PCI Interrupt Link [Z00O] enabled at IRQ 21 [ 1.176498] alloc irq_desc for 21 on node -1 [ 1.176501] alloc kstat_irqs on node -1 [ 1.176509] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z00O] -> GSI 21 (level, low) -> IRQ 21 [ 1.176520] ehci_hcd 0000:00:04.1: setting latency timer to 64 [ 1.176523] ehci_hcd 0000:00:04.1: EHCI Host Controller [ 1.176559] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2 [ 1.176584] ehci_hcd 0000:00:04.1: debug port 1 [ 1.176588] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported [ 1.176606] ehci_hcd 0000:00:04.1: irq 21, io mem 0xd0889400 [ 1.188032] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00 [ 1.188105] usb usb2: configuration #1 chosen from 1 choice [ 1.188133] hub 2-0:1.0: USB hub found [ 1.188141] hub 2-0:1.0: 5 ports detected [ 1.188197] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.188509] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 20 [ 1.188513] alloc irq_desc for 20 on node -1 [ 1.188515] alloc kstat_irqs on node -1 [ 1.188524] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 20 (level, low) -> IRQ 20 [ 1.188536] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 1.188539] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 1.188581] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3 [ 1.188609] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd0886000 [ 1.246082] usb usb3: configuration #1 chosen from 1 choice [ 1.246110] hub 3-0:1.0: USB hub found [ 1.246120] hub 3-0:1.0: 5 ports detected [ 1.246452] ACPI: PCI Interrupt Link [Z00N] enabled at IRQ 23 [ 1.246457] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z00N] -> GSI 23 (level, low) -> IRQ 23 [ 1.246467] ohci_hcd 0000:00:04.0: setting latency timer to 64 [ 1.246471] ohci_hcd 0000:00:04.0: OHCI Host Controller [ 1.246507] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4 [ 1.246531] ohci_hcd 0000:00:04.0: irq 23, io mem 0xd0887000 [ 1.302075] usb usb4: configuration #1 chosen from 1 choice [ 1.302104] hub 4-0:1.0: USB hub found [ 1.302114] hub 4-0:1.0: 5 ports detected [ 1.302169] uhci_hcd: USB Universal Host Controller Interface driver [ 1.302268] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.324032] ACPI: EC: missing confirmations, switch off interrupt mode. [ 1.329667] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WP03, max UDMA/33 [ 1.329693] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc000c600) ACPI=0x701f (60:600:0x13) [ 1.333476] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.333485] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.333562] mice: PS/2 mouse device common for all mice [ 1.333706] rtc_cmos 00:04: RTC can wake from S4 [ 1.333749] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.333787] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs [ 1.333894] device-mapper: uevent: version 1.0.3 [ 1.334569] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 1.334677] device-mapper: multipath: version 1.1.0 loaded [ 1.334680] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.334821] EISA: Probing bus 0 at eisa.0 [ 1.334827] Cannot allocate resource for EISA slot 1 [ 1.334832] Cannot allocate resource for EISA slot 3 [ 1.334835] Cannot allocate resource for EISA slot 4 [ 1.334848] EISA: Detected 0 cards. [ 1.334983] cpuidle: using governor ladder [ 1.334985] cpuidle: using governor menu [ 1.335506] TCP cubic registered [ 1.335671] NET: Registered protocol family 10 [ 1.336134] lo: Disabled Privacy Extensions [ 1.336473] NET: Registered protocol family 17 [ 1.336494] Bluetooth: L2CAP ver 2.13 [ 1.336496] Bluetooth: L2CAP socket layer initialized [ 1.336500] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.336502] Bluetooth: SCO socket layer initialized [ 1.336546] Bluetooth: RFCOMM TTY layer initialized [ 1.336550] Bluetooth: RFCOMM socket layer initialized [ 1.336552] Bluetooth: RFCOMM ver 1.11 [ 1.336572] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 processors (2 cpu cores) (version 2.20.00) [ 1.336615] powernow-k8: 0 : fid 0xb (1900 MHz), vid 0x13 [ 1.336618] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x14 [ 1.336621] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x15 [ 1.336624] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1a [ 1.336697] Using IPI No-Shortcut mode [ 1.336782] PM: Resume from disk failed. [ 1.336794] registered taskstats version 1 [ 1.336946] Magic number: 6:251:994 [ 1.337050] rtc_cmos 00:04: setting system clock to 2010-12-29 15:59:41 UTC (1293638381) [ 1.337054] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.337056] EDD information not available. [ 1.344327] ata5.00: configured for UDMA/33 [ 1.360292] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.484039] ata2: SATA link down (SStatus 0 SControl 300) [ 1.484059] ata3: SATA link down (SStatus 0 SControl 300) [ 1.484073] ata4: SATA link down (SStatus 0 SControl 300) [ 1.544028] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.677317] usb 1-2: configuration #1 chosen from 1 choice [ 1.788028] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 1.928032] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.928910] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100 [ 1.928914] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.929431] usb 1-3: configuration #1 chosen from 1 choice [ 1.929988] ata1.00: configured for UDMA/100 [ 2.232028] usb 3-1: new low speed USB device using ohci_hcd and address 2 [ 2.445102] usb 3-1: configuration #1 chosen from 1 choice [ 2.560029] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 2.693683] usb 2-1: configuration #1 chosen from 1 choice [ 2.764135] ACPI: Battery Slot [BAT1] (battery present) [ 2.764331] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 [ 2.764475] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.764517] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 2.764565] sd 0:0:0:0: [sda] Write Protect is off [ 2.764568] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.764593] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.764724] sda: [ 2.767769] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WP03 PQ: 0 ANSI: 5 [ 2.778717] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.778721] Uniform CD-ROM driver Revision: 3.20 [ 2.778812] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.778865] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.778913] ata6: port disabled. ignoring. [ 3.183615] sda1 sda2 < sda5 > [ 3.203185] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.203219] Freeing unused kernel memory: 544k freed [ 3.203631] Write protecting the kernel text: 4588k [ 3.203672] Write protecting the kernel read-only data: 1840k [ 3.382250] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 3.382597] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22 [ 3.382603] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22 [ 3.382609] forcedeth 0000:00:0a.0: setting latency timer to 64 [ 3.385986] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS [ 3.386206] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:08/input/input6 [ 3.386245] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no) [ 3.439093] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11 [ 3.439110] ohci1394 0000:01:04.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11 [ 3.451274] usbcore: registered new interface driver hiddev [ 3.462305] Initializing USB Mass Storage driver... [ 3.462469] scsi6 : SCSI emulation for USB Mass Storage devices [ 3.462599] usb-storage: device found at 3 [ 3.462601] usb-storage: waiting for device to settle before scanning [ 3.462641] scsi7 : SCSI emulation for USB Mass Storage devices [ 3.462717] usbcore: registered new interface driver usb-storage [ 3.462720] USB Mass Storage support registered. [ 3.462887] usb-storage: device found at 2 [ 3.462889] usb-storage: waiting for device to settle before scanning [ 3.468403] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input7 [ 3.468493] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1/input0 [ 3.468515] usbcore: registered new interface driver usbhid [ 3.468519] usbhid: v2.6:USB HID core driver [ 3.498057] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11] MMIO=[d0500000-d05007ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 3.901259] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1b:38:d2:d5:a3 [ 3.901265] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3 [ 4.499174] PM: Starting manual resume from disk [ 4.499180] PM: Resume from partition 8:5 [ 4.499182] PM: Checking hibernation image. [ 4.499326] PM: Resume from disk failed. [ 4.506269] EXT4-fs (sda1): INFO: recovery required on readonly filesystem [ 4.506276] EXT4-fs (sda1): write access will be enabled during recovery [ 4.524391] EXT4-fs (sda1): barriers enabled [ 4.772285] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f82ba40038f] [ 6.627363] kjournald2 starting: pid 424, dev sda1:8, commit interval 5 seconds [ 6.627445] EXT4-fs (sda1): delayed allocation enabled [ 6.627450] EXT4-fs: file extents enabled [ 6.648425] EXT4-fs: mballoc enabled [ 6.648445] EXT4-fs (sda1): orphan cleanup on readonly fs [ 6.648458] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1453120 [ 6.648560] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 1450171 [ 6.648581] EXT4-fs (sda1): 2 orphan inodes deleted [ 6.648585] EXT4-fs (sda1): recovery complete [ 6.864932] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 7.643840] type=1505 audit(1293638387.806:2): operation="profile_load" pid=449 name=/usr/share/gdm/guest-session/Xsession [ 7.650083] type=1505 audit(1293638387.811:3): operation="profile_load" pid=450 name=/sbin/dhclient3 [ 7.650399] type=1505 audit(1293638387.811:4): operation="profile_load" pid=450 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 7.650576] type=1505 audit(1293638387.811:5): operation="profile_load" pid=450 name=/usr/lib/connman/scripts/dhclient-script [ 7.722565] type=1505 audit(1293638387.884:6): operation="profile_load" pid=451 name=/usr/bin/evince [ 7.727710] type=1505 audit(1293638387.887:7): operation="profile_load" pid=451 name=/usr/bin/evince-previewer [ 7.730829] type=1505 audit(1293638387.891:8): operation="profile_load" pid=451 name=/usr/bin/evince-thumbnailer [ 7.772764] type=1505 audit(1293638387.931:9): operation="profile_load" pid=453 name=/usr/lib/cups/backend/cups-pdf [ 7.773184] type=1505 audit(1293638387.935:10): operation="profile_load" pid=453 name=/usr/sbin/cupsd [ 7.786563] type=1505 audit(1293638387.947:11): operation="profile_load" pid=454 name=/usr/sbin/tcpdump [ 8.461201] usb-storage: device scan complete [ 8.461205] usb-storage: device scan complete [ 8.462915] scsi 7:0:0:0: Direct-Access WD 7500AAC External 1.65 PQ: 0 ANSI: 4 [ 8.463457] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 8.464153] sd 7:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB) [ 8.466778] sd 7:0:0:0: [sdb] Write Protect is off [ 8.466781] sd 7:0:0:0: [sdb] Mode Sense: 21 00 00 00 [ 8.466784] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 8.469768] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 8.469772] sdb: sdb1 [ 8.472779] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 8.472783] sd 7:0:0:0: [sdb] Attached SCSI disk [ 18.408893] udev: starting version 147 [ 18.448842] Adding 5277312k swap on /dev/sda5. Priority:-1 extents:1 across:5277312k [ 18.456406] lirc_dev: IR Remote Control driver registered, major 61 [ 18.457080] lirc_dev: lirc_register_driver: sample_rate: 0 [ 18.457187] enecir: KB3926B detected [ 18.457190] enecir: chip is 0x3909 - 0x24, 0xc0 [ 18.457193] enecir: driver has been succesfully loaded [ 18.473976] lp: driver loaded but no devices found [ 18.952038] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] 20090521 evregion-424 [ 18.952060] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.ECOK] (Node f7013d50), AE_TIME [ 18.952100] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.LPC0.BAT1._BST] (Node f70141e0), AE_TIME [ 18.952178] ACPI Exception: AE_TIME, Evaluating _BST 20090521 battery-385 [ 19.275721] EXT4-fs (sda1): internal journal on sda1:8 [ 19.587714] alloc irq_desc for 27 on node -1 [ 19.587718] alloc kstat_irqs on node -1 [ 19.587730] forcedeth 0000:00:0a.0: irq 27 for MSI/MSI-X [ 19.587932] eth0: no link during initialization. [ 19.588877] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 19.830419] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x3040 [ 19.830441] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x3000 [ 19.835404] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 19.921035] sdhci: Secure Digital Host Controller Interface driver [ 19.921039] sdhci: Copyright(c) Pierre Ossman [ 19.922524] sdhci-pci 0000:01:04.1: SDHCI controller found [1180:0822] (rev 22) [ 19.922869] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 11 [ 19.922875] sdhci-pci 0000:01:04.1: PCI INT B -> Link[LNK2] -> GSI 11 (level, low) -> IRQ 11 [ 19.924932] Registered led device: mmc0:: [ 19.925963] mmc0: SDHCI controller on PCI [0000:01:04.1] using PIO [ 19.928722] acer-wmi: Acer Laptop ACPI-WMI Extras [ 19.946476] ricoh-mmc: Ricoh MMC Controller disabling driver [ 19.946480] ricoh-mmc: Copyright(c) Philip Langdale [ 19.946519] ricoh-mmc: Ricoh MMC controller found at 0000:01:04.2 [1180:0843] (rev 12) [ 19.946534] ricoh-mmc: Controller is now disabled. [ 19.993202] cfg80211: Calling CRDA to update world regulatory domain [ 20.017859] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19 [ 20.017866] alloc irq_desc for 19 on node -1 [ 20.017869] alloc kstat_irqs on node -1 [ 20.017881] ath5k 0000:05:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19 [ 20.017890] ath5k 0000:05:00.0: setting latency timer to 64 [ 20.017936] ath5k 0000:05:00.0: registered as 'phy0' [ 20.066938] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21 [ 20.066945] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21 [ 20.066978] HDA Intel 0000:00:07.0: setting latency timer to 64 [ 20.511764] ath: EEPROM regdomain: 0x65 [ 20.511766] ath: EEPROM indicates we should expect a direct regpair map [ 20.511771] ath: Country alpha2 being used: 00 [ 20.511773] ath: Regpair used: 0x65 [ 20.597941] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input8 [ 20.642243] phy0: Selected rate control algorithm 'minstrel' [ 20.643068] Registered led device: ath5k-phy0::rx [ 20.643088] Registered led device: ath5k-phy0::tx [ 20.643092] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 21.240241] cfg80211: World regulatory domain updated: [ 21.240246] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 21.240250] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.240254] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.240257] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 21.240260] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.240263] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 21.311429] ip_tables: (C) 2000-2006 Netfilter Core Team [ 21.339420] Linux video capture interface: v2.00 [ 21.343124] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101) [ 21.356715] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3:1.0/input/input9 [ 21.356775] usbcore: registered new interface driver uvcvideo [ 21.356779] USB Video Class driver (v0.1.0) [ 21.402987] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.740291] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input10 [ 21.774244] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input11 [ 21.818784] type=1505 audit(1293638401.979:12): operation="profile_replace" pid=1252 name=/usr/share/gdm/guest-session/Xsession [ 21.820743] type=1505 audit(1293638401.979:13): operation="profile_replace" pid=1253 name=/sbin/dhclient3 [ 21.821134] type=1505 audit(1293638401.983:14): operation="profile_replace" pid=1253 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 21.821314] type=1505 audit(1293638401.983:15): operation="profile_replace" pid=1253 name=/usr/lib/connman/scripts/dhclient-script [ 21.827145] type=1505 audit(1293638401.987:16): operation="profile_replace" pid=1254 name=/usr/bin/evince [ 21.832610] type=1505 audit(1293638401.991:17): operation="profile_replace" pid=1254 name=/usr/bin/evince-previewer [ 21.835721] type=1505 audit(1293638401.995:18): operation="profile_replace" pid=1254 name=/usr/bin/evince-thumbnailer [ 21.841957] type=1505 audit(1293638402.003:19): operation="profile_replace" pid=1256 name=/usr/lib/cups/backend/cups-pdf [ 21.842347] type=1505 audit(1293638402.003:20): operation="profile_replace" pid=1256 name=/usr/sbin/cupsd [ 21.844564] type=1505 audit(1293638402.003:21): operation="profile_replace" pid=1257 name=/usr/sbin/tcpdump [ 22.390082] ppdev: user-space parallel port driver [ 26.834105] ACPI Error (dswload-0790): [_T_0] Namespace lookup failure, AE_ALREADY_EXISTS [ 26.834114] ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog 20090521 psloop-227 [ 26.834121] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.WMID.WMBA] (Node f70110f0), AE_ALREADY_EXISTS [ 26.834133] ACPI: Marking method WMBA as Serialized because of AE_ALREADY_EXISTS error [ 29.917034] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 39.889219] wlan0: authenticate with AP 00:05:59:06:3d:b3 [ 39.890548] wlan0: authenticated [ 39.890554] wlan0: associate with AP 00:05:59:06:3d:b3 [ 39.895364] wlan0: RX AssocResp from 00:05:59:06:3d:b3 (capab=0x471 status=0 aid=1) [ 39.895370] wlan0: associated [ 40.072429] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 40.165048] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 44.902083] padlock: VIA PadLock not detected. [ 50.304028] wlan0: no IPv6 routers present [ 56.417045] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 56.693270] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 66.945046] usb 1-2: reset high speed USB device using ehci_hcd and address 3 [ 67.078523] scsi 6:0:0:0: Device offlined - not ready after error recovery [ 83.500058] Clocksource tsc unstable (delta = -74030610 ns) [ 375.413021] CE: hpet increasing min_delta_ns to 15000 nsec [ 1633.652825] usb 1-2: USB disconnect, address 3 [ 1643.500078] usb 1-2: new high speed USB device using ehci_hcd and address 5 [ 1643.634517] usb 1-2: configuration #1 chosen from 1 choice [ 1643.638512] scsi8 : SCSI emulation for USB Mass Storage devices [ 1643.638868] usb-storage: device found at 5 [ 1643.638874] usb-storage: waiting for device to settle before scanning [ 1648.636298] usb-storage: device scan complete [ 1648.638616] scsi 8:0:0:0: Direct-Access Seagate Desktop 0130 PQ: 0 ANSI: 4 [ 1648.639809] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 1648.640481] sd 8:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 1648.650511] sd 8:0:0:0: [sdc] Write Protect is off [ 1648.650526] sd 8:0:0:0: [sdc] Mode Sense: 2f 08 00 00 [ 1648.650534] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1648.654465] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1648.654485] sdc: sdc1 [ 1648.692454] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 1648.692474] sd 8:0:0:0: [sdc] Attached SCSI disk [ 5443.100064] usb 1-2: reset high speed USB device using ehci_hcd and address 5 [ 7243.112058] usb 1-2: reset high speed USB device using ehci_hcd and address 5 [ 9043.100061] usb 1-2: reset high speed USB device using ehci_hcd and address 5 [10843.112059] usb 1-2: reset high speed USB device using ehci_hcd and address 5 [12643.112061] usb 1-2: reset high speed USB device using ehci_hcd and address 5 [14443.112075] usb 1-2: reset high speed USB device using ehci_hcd and address 5 [16243.113085] usb 1-2: reset high speed USB device using ehci_hcd and address 5

Αυτά είναι τα αποτελέσματα!

από **the_eye** » 30 Δεκ 2010, 00:29

ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam

Αυτή είναι η camera σου και είναι με usb διασύνδεση.

Δοκίμασε να εγκαταστήσεις το πακέτο

Κώδικας: Επιλογή όλων: v4l2ucp

από **ph03nix** » 30 Δεκ 2010, 01:09

the_eye έγραψε:ID 064e:a101 Suyin Corp. Acer CrystalEye Webcam

Αυτή είναι η camera σου και είναι με usb διασύνδεση.

Δοκίμασε να εγκαταστήσεις το πακέτο

Κώδικας: Επιλογή όλων
v4l2ucp

Ναι όλα κομπλέ σε cheese κ skype!Ευχαριστώ!Τι πακέτο είναι αυτό ακριβώς που εγκατέστησα?

από **the_eye** » 30 Δεκ 2010, 01:55

Δες εδώ
http://v4l2ucp.sourceforge.net/

Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype

Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype

Re: Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype

Re: Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype

Re: Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype

Re: Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype

Re: Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype

Re: Πρόβλημα σε ενσωματωμένη web cam σε cheese+skype