Ενσωματωμενη camera προκαλει''κολλημα'' στην εκκινηση(Λυθηκε

[jonhy]

Γεια χαρα σε ολους.

Το προβλημα μου εχει ως εξης:

Ενω στην αρχη το συστημα εκανε κανονικη εκκινηση ,ξαφνικα αρχισε να κολλαει...(Εννοω στην μαυρη οθονη με το λογοτυπο και την μπαρα προοδου)Πατωντας καποια κουμπια ετσι στα ψιλοτυφλα (νομιζω καποιο απο τα πρωτα F ) εβγαλε μια μαυρη οθονη με ενα σωρο κατεβατα που ετρεχαν αρκετα γρηγορα.Παρατηρωντας τα καταλαβα(διορθωστε με αν κανω λαθος) οτι προκειται για τα συμβαντα που εξεταζει η φορτωνει ο υπολογιστης.Και εγραφε ξανα και ξανα το ιδιο πραγμα (μιλαμε για εκατονταδες φορες)
''unable to detect camera device'' η κατι παρεμφερες.

Μετα απο ωρα βεβαια και αρκετη υπομονη φορτωνει...
Δοκιμασα να κανω εκκινηση με την 2η επιλογη σε safe mode και κανει το ιδιο!

Να σημειωσω οτι την καμερα δεν την χρησιμοποιω ετσι κι αλλιως.Οποτε οποιαδηποτε λυση ακομα και μη λειτουργικη για την καμερα δεν με πειραζει.

Διαβαζοντας αυτο το ποστ

Κώδικας: Επιλογή όλων

http://forum.ubuntu-gr.org/viewtopic.php?f=16&t=1577

και δινοντας τις αντιστοιχες εντολες του ftso παιρνω αυτα.Δεν βλεπω πουθενα την καμερα.Εκτος και κανω λαθος:

Κώδικας: Επιλογή όλων

j0hn-e@john-e:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub [8086:27a0] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port [8086:27a1] (rev 03)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 02)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 02)
00:1c.2 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 [8086:27d4] (rev 02)
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 [8086:27d6] (rev 02)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 02)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 02)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 02)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 02)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 02)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 02)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 02)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 02)
01:00.0 VGA compatible controller [0300]: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
05:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
0a:06.0 CardBus bridge [0607]: Texas Instruments PCIxx12 Cardbus Controller [104c:8039]
0a:06.2 Mass storage controller [0180]: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD) [104c:803b]
0a:06.3 SD Host controller [0805]: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller [104c:803c]
j0hn-e@john-e:~$ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 002: ID 045e:00e1 Microsoft Corp. Wireless Laser Mouse 6000 Reciever
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 1058:0702 Western Digital Technologies, Inc.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
j0hn-e@john-e:~$

Ευχαριστω ...

[logari81]

ουτε εγω την βλεπω, δωσε μας το αποτελεσμα της εντολης

Κώδικας: Επιλογή όλων

dmesg

[jonhy]

Νομιζω οτι αυτο ειναι τα κατεβατα που ελεγα:

Κώδικας: Επιλογή όλων

[ 4336.784050] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4336.784073] gspca: probe of 2-7:1.0 failed with error -5
[ 4337.044426] usb 2-7: new high speed USB device using ehci_hcd and address 63
[ 4337.217595] usb 2-7: configuration #1 chosen from 1 choice
[ 4337.220379] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4337.428812] usb 2-7: USB disconnect, address 63
[ 4337.428909] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4337.428932] gspca: probe of 2-7:1.0 failed with error -5
[ 4337.681767] usb 2-7: new high speed USB device using ehci_hcd and address 64
[ 4337.854715] usb 2-7: configuration #1 chosen from 1 choice
[ 4337.857511] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4338.066184] usb 2-7: USB disconnect, address 64
[ 4338.066206] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4338.066226] gspca: probe of 2-7:1.0 failed with error -5
[ 4338.310593] usb 2-7: new high speed USB device using ehci_hcd and address 65
[ 4338.484342] usb 2-7: configuration #1 chosen from 1 choice
[ 4338.486963] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4338.696084] usb 2-7: USB disconnect, address 65
[ 4338.696196] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4338.696220] gspca: probe of 2-7:1.0 failed with error -5
[ 4338.934650] usb 2-7: new high speed USB device using ehci_hcd and address 66
[ 4339.106625] usb 2-7: configuration #1 chosen from 1 choice
[ 4339.109434] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4339.318204] usb 2-7: USB disconnect, address 66
[ 4339.318325] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4339.318346] gspca: probe of 2-7:1.0 failed with error -5
[ 4339.578046] usb 2-7: new high speed USB device using ehci_hcd and address 67
[ 4339.750812] usb 2-7: configuration #1 chosen from 1 choice
[ 4339.753594] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4339.962521] usb 2-7: USB disconnect, address 67
[ 4339.962617] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4339.962638] gspca: probe of 2-7:1.0 failed with error -5
[ 4340.217012] usb 2-7: new high speed USB device using ehci_hcd and address 68
[ 4340.389002] usb 2-7: configuration #1 chosen from 1 choice
[ 4340.391811] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4340.600459] usb 2-7: USB disconnect, address 68
[ 4340.600698] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4340.600719] gspca: probe of 2-7:1.0 failed with error -5
[ 4340.843050] usb 2-7: new high speed USB device using ehci_hcd and address 69
[ 4341.015808] usb 2-7: configuration #1 chosen from 1 choice
[ 4341.018619] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4341.227539] usb 2-7: USB disconnect, address 69
[ 4341.227661] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4341.227682] gspca: probe of 2-7:1.0 failed with error -5
[ 4341.497892] usb 2-7: new high speed USB device using ehci_hcd and address 70
[ 4341.671031] usb 2-7: configuration #1 chosen from 1 choice
[ 4341.673852] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4341.882492] usb 2-7: USB disconnect, address 70
[ 4341.882605] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4341.882633] gspca: probe of 2-7:1.0 failed with error -5
[ 4342.142738] usb 2-7: new high speed USB device using ehci_hcd and address 71
[ 4342.315571] usb 2-7: configuration #1 chosen from 1 choice
[ 4342.318371] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4342.527162] usb 2-7: USB disconnect, address 71
[ 4342.527283] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4342.527305] gspca: probe of 2-7:1.0 failed with error -5
[ 4342.788976] usb 2-7: new high speed USB device using ehci_hcd and address 72
[ 4342.961671] usb 2-7: configuration #1 chosen from 1 choice
[ 4342.964456] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4343.173027] usb 2-7: USB disconnect, address 72
[ 4343.173264] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4343.173285] gspca: probe of 2-7:1.0 failed with error -5
[ 4343.423150] usb 2-7: new high speed USB device using ehci_hcd and address 73
[ 4343.596041] usb 2-7: configuration #1 chosen from 1 choice
[ 4343.598864] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4343.807531] usb 2-7: USB disconnect, address 73
[ 4343.807553] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4343.807572] gspca: probe of 2-7:1.0 failed with error -5
[ 4344.062831] usb 2-7: new high speed USB device using ehci_hcd and address 74
[ 4344.236654] usb 2-7: configuration #1 chosen from 1 choice
[ 4344.239458] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4344.448247] usb 2-7: USB disconnect, address 74
[ 4344.448505] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4344.448527] gspca: probe of 2-7:1.0 failed with error -5
[ 4344.698088] usb 2-7: new high speed USB device using ehci_hcd and address 75
[ 4344.869984] usb 2-7: configuration #1 chosen from 1 choice
[ 4344.872795] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4345.081555] usb 2-7: USB disconnect, address 75
[ 4345.081804] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4345.081828] gspca: probe of 2-7:1.0 failed with error -5
[ 4345.349165] usb 2-7: new high speed USB device using ehci_hcd and address 76
[ 4345.523081] usb 2-7: configuration #1 chosen from 1 choice
[ 4345.525853] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4345.733669] usb 2-7: USB disconnect, address 76
[ 4345.733899] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4345.733920] gspca: probe of 2-7:1.0 failed with error -5
[ 4345.985650] usb 2-7: new high speed USB device using ehci_hcd and address 77
[ 4346.158600] usb 2-7: configuration #1 chosen from 1 choice
[ 4346.161379] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4346.370061] usb 2-7: USB disconnect, address 77
[ 4346.370181] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4346.370201] gspca: probe of 2-7:1.0 failed with error -5
[ 4346.619850] usb 2-7: new high speed USB device using ehci_hcd and address 78
[ 4346.791810] usb 2-7: configuration #1 chosen from 1 choice
[ 4346.794639] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4347.003274] usb 2-7: USB disconnect, address 78
[ 4347.003393] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4347.003413] gspca: probe of 2-7:1.0 failed with error -5
[ 4347.272550] usb 2-7: new high speed USB device using ehci_hcd and address 79
[ 4347.445452] usb 2-7: configuration #1 chosen from 1 choice
[ 4347.448271] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4347.657034] usb 2-7: USB disconnect, address 79
[ 4347.657055] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4347.657075] gspca: probe of 2-7:1.0 failed with error -5
[ 4347.925365] usb 2-7: new high speed USB device using ehci_hcd and address 80
[ 4348.101049] usb 2-7: configuration #1 chosen from 1 choice
[ 4348.105252] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4348.317954] usb 2-7: USB disconnect, address 80
[ 4348.318218] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4348.318241] gspca: probe of 2-7:1.0 failed with error -5
[ 4348.589243] usb 2-7: new high speed USB device using ehci_hcd and address 81
[ 4348.761020] usb 2-7: configuration #1 chosen from 1 choice
[ 4348.763641] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4348.971390] usb 2-7: USB disconnect, address 81
[ 4348.971638] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4348.971659] gspca: probe of 2-7:1.0 failed with error -5
[ 4349.210592] usb 2-7: new high speed USB device using ehci_hcd and address 82
[ 4349.383678] usb 2-7: configuration #1 chosen from 1 choice
[ 4349.386521] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4349.595133] usb 2-7: USB disconnect, address 82
[ 4349.595372] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4349.595392] gspca: probe of 2-7:1.0 failed with error -5
[ 4349.869008] usb 2-7: new high speed USB device using ehci_hcd and address 83
[ 4350.042522] usb 2-7: configuration #1 chosen from 1 choice
[ 4350.045195] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4350.257385] usb 2-7: USB disconnect, address 83
[ 4350.257622] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4350.257642] gspca: probe of 2-7:1.0 failed with error -5
[ 4350.524187] usb 2-7: new high speed USB device using ehci_hcd and address 84
[ 4350.700851] usb 2-7: configuration #1 chosen from 1 choice
[ 4350.703468] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4350.909602] usb 2-7: USB disconnect, address 84
[ 4350.909702] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4350.909723] gspca: probe of 2-7:1.0 failed with error -5
[ 4351.169873] usb 2-7: new high speed USB device using ehci_hcd and address 85
[ 4351.342588] usb 2-7: configuration #1 chosen from 1 choice
[ 4351.345283] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4351.553344] usb 2-7: USB disconnect, address 85
[ 4351.553579] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4351.553600] gspca: probe of 2-7:1.0 failed with error -5
[ 4351.827713] usb 2-7: new high speed USB device using ehci_hcd and address 86
[ 4352.000406] usb 2-7: configuration #1 chosen from 1 choice
[ 4352.003036] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4352.212291] usb 2-7: USB disconnect, address 86
[ 4352.212531] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4352.212554] gspca: probe of 2-7:1.0 failed with error -5
[ 4352.451057] usb 2-7: new high speed USB device using ehci_hcd and address 87
[ 4352.624718] usb 2-7: configuration #1 chosen from 1 choice
[ 4352.627309] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4352.835470] usb 2-7: USB disconnect, address 87
[ 4352.835492] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4352.835513] gspca: probe of 2-7:1.0 failed with error -5
[ 4353.068326] usb 2-7: new high speed USB device using ehci_hcd and address 88
[ 4353.241164] usb 2-7: configuration #1 chosen from 1 choice
[ 4353.243998] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4353.452767] usb 2-7: USB disconnect, address 88
[ 4353.452931] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4353.452953] gspca: probe of 2-7:1.0 failed with error -5
[ 4353.721568] usb 2-7: new high speed USB device using ehci_hcd and address 89
[ 4353.895122] usb 2-7: configuration #1 chosen from 1 choice
[ 4353.897712] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4354.107000] usb 2-7: USB disconnect, address 89
[ 4354.107023] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4354.107044] gspca: probe of 2-7:1.0 failed with error -5
[ 4354.345325] usb 2-7: new high speed USB device using ehci_hcd and address 90
[ 4354.518980] usb 2-7: configuration #1 chosen from 1 choice
[ 4354.521569] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4354.729862] usb 2-7: USB disconnect, address 90
[ 4354.729958] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4354.729980] gspca: probe of 2-7:1.0 failed with error -5
[ 4354.970629] usb 2-7: new high speed USB device using ehci_hcd and address 91
[ 4355.143493] usb 2-7: configuration #1 chosen from 1 choice
[ 4355.146312] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4355.355189] usb 2-7: USB disconnect, address 91
[ 4355.355336] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4355.355359] gspca: probe of 2-7:1.0 failed with error -5
[ 4355.625319] usb 2-7: new high speed USB device using ehci_hcd and address 92
[ 4355.798125] usb 2-7: configuration #1 chosen from 1 choice
[ 4355.800911] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4356.013821] usb 2-7: USB disconnect, address 92
[ 4356.013917] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4356.013939] gspca: probe of 2-7:1.0 failed with error -5
[ 4356.273226] usb 2-7: new high speed USB device using ehci_hcd and address 93
[ 4356.446219] usb 2-7: configuration #1 chosen from 1 choice
[ 4356.449036] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4356.657925] usb 2-7: USB disconnect, address 93
[ 4356.658017] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4356.658037] gspca: probe of 2-7:1.0 failed with error -5
[ 4356.920087] usb 2-7: new high speed USB device using ehci_hcd and address 94
[ 4357.092019] usb 2-7: configuration #1 chosen from 1 choice
[ 4357.094694] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4357.303532] usb 2-7: USB disconnect, address 94
[ 4357.303764] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4357.303785] gspca: probe of 2-7:1.0 failed with error -5
[ 4357.577961] usb 2-7: new high speed USB device using ehci_hcd and address 95
[ 4357.750746] usb 2-7: configuration #1 chosen from 1 choice
[ 4357.753545] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4357.962483] usb 2-7: USB disconnect, address 95
[ 4357.962578] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4357.962602] gspca: probe of 2-7:1.0 failed with error -5
[ 4358.230867] usb 2-7: new high speed USB device using ehci_hcd and address 96
[ 4358.403506] usb 2-7: configuration #1 chosen from 1 choice
[ 4358.406082] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4358.615365] usb 2-7: USB disconnect, address 96
[ 4358.615615] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4358.615636] gspca: probe of 2-7:1.0 failed with error -5
[ 4358.885708] usb 2-7: new high speed USB device using ehci_hcd and address 97
[ 4359.059190] usb 2-7: configuration #1 chosen from 1 choice
[ 4359.061869] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4359.274317] usb 2-7: USB disconnect, address 97
[ 4359.274709] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4359.274731] gspca: probe of 2-7:1.0 failed with error -5
[ 4359.526937] usb 2-7: new high speed USB device using ehci_hcd and address 98
[ 4359.701810] usb 2-7: configuration #1 chosen from 1 choice
[ 4359.704578] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4359.911391] usb 2-7: USB disconnect, address 98
[ 4359.911561] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4359.911584] gspca: probe of 2-7:1.0 failed with error -5
[ 4360.164942] usb 2-7: new high speed USB device using ehci_hcd and address 99
[ 4360.337566] usb 2-7: configuration #1 chosen from 1 choice
[ 4360.340157] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4360.549430] usb 2-7: USB disconnect, address 99
[ 4360.549668] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4360.549689] gspca: probe of 2-7:1.0 failed with error -5
[ 4360.791188] usb 2-7: new high speed USB device using ehci_hcd and address 100
[ 4360.963958] usb 2-7: configuration #1 chosen from 1 choice
[ 4360.966544] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4361.175579] usb 2-7: USB disconnect, address 100
[ 4361.175601] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4361.175621] gspca: probe of 2-7:1.0 failed with error -5
[ 4361.407250] usb 2-7: new high speed USB device using ehci_hcd and address 101
[ 4361.579992] usb 2-7: configuration #1 chosen from 1 choice
[ 4361.582784] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4361.791694] usb 2-7: USB disconnect, address 101
[ 4361.791790] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4361.791812] gspca: probe of 2-7:1.0 failed with error -5
[ 4362.051055] usb 2-7: new high speed USB device using ehci_hcd and address 102
[ 4362.224781] usb 2-7: configuration #1 chosen from 1 choice
[ 4362.227458] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4362.436530] usb 2-7: USB disconnect, address 102
[ 4362.436638] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4362.436658] gspca: probe of 2-7:1.0 failed with error -5
[ 4362.678488] usb 2-7: new high speed USB device using ehci_hcd and address 103
[ 4362.852113] usb 2-7: configuration #1 chosen from 1 choice
[ 4362.854719] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4363.062868] usb 2-7: USB disconnect, address 103
[ 4363.063109] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4363.063130] gspca: probe of 2-7:1.0 failed with error -5
[ 4363.306821] usb 2-7: new high speed USB device using ehci_hcd and address 104
[ 4363.480752] usb 2-7: configuration #1 chosen from 1 choice
[ 4363.483423] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4363.691255] usb 2-7: USB disconnect, address 104
[ 4363.691486] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4363.691508] gspca: probe of 2-7:1.0 failed with error -5
[ 4363.964169] usb 2-7: new high speed USB device using ehci_hcd and address 105
[ 4364.137171] usb 2-7: configuration #1 chosen from 1 choice
[ 4364.139964] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4364.348634] usb 2-7: USB disconnect, address 105
[ 4364.348754] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4364.348775] gspca: probe of 2-7:1.0 failed with error -5
[ 4364.598037] usb 2-7: new high speed USB device using ehci_hcd and address 106
[ 4364.770966] usb 2-7: configuration #1 chosen from 1 choice
[ 4364.773782] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4364.982548] usb 2-7: USB disconnect, address 106
[ 4364.982645] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4364.982670] gspca: probe of 2-7:1.0 failed with error -5
[ 4365.226730] usb 2-7: new high speed USB device using ehci_hcd and address 107
[ 4365.399656] usb 2-7: configuration #1 chosen from 1 choice
[ 4365.402378] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4365.611144] usb 2-7: USB disconnect, address 107
[ 4365.611237] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4365.611256] gspca: probe of 2-7:1.0 failed with error -5
[ 4365.885018] usb 2-7: new high speed USB device using ehci_hcd and address 108
[ 4366.057897] usb 2-7: configuration #1 chosen from 1 choice
[ 4366.060682] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4366.269474] usb 2-7: USB disconnect, address 108
[ 4366.269496] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4366.269517] gspca: probe of 2-7:1.0 failed with error -5
[ 4366.532166] usb 2-7: new high speed USB device using ehci_hcd and address 109
[ 4366.705059] usb 2-7: configuration #1 chosen from 1 choice
[ 4366.707708] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4366.917779] usb 2-7: USB disconnect, address 109
[ 4366.918007] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4366.918027] gspca: probe of 2-7:1.0 failed with error -5
[ 4367.174186] usb 2-7: new high speed USB device using ehci_hcd and address 110
[ 4367.346816] usb 2-7: configuration #1 chosen from 1 choice
[ 4367.349463] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4367.558463] usb 2-7: USB disconnect, address 110
[ 4367.558580] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4367.558602] gspca: probe of 2-7:1.0 failed with error -5
[ 4367.801514] usb 2-7: new high speed USB device using ehci_hcd and address 111
[ 4367.975200] usb 2-7: configuration #1 chosen from 1 choice
[ 4367.977789] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4368.190194] usb 2-7: USB disconnect, address 111
[ 4368.190287] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4368.190308] gspca: probe of 2-7:1.0 failed with error -5
[ 4368.437256] usb 2-7: new high speed USB device using ehci_hcd and address 112
[ 4368.609952] usb 2-7: configuration #1 chosen from 1 choice
[ 4368.612557] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4368.824705] usb 2-7: USB disconnect, address 112
[ 4368.824877] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4368.824902] gspca: probe of 2-7:1.0 failed with error -5
[ 4369.100619] usb 2-7: new high speed USB device using ehci_hcd and address 113
[ 4369.271818] usb 2-7: configuration #1 chosen from 1 choice
[ 4369.274613] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4369.483523] usb 2-7: USB disconnect, address 113
[ 4369.483768] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4369.483789] gspca: probe of 2-7:1.0 failed with error -5
[ 4369.740753] usb 2-7: new high speed USB device using ehci_hcd and address 114
[ 4369.913594] usb 2-7: configuration #1 chosen from 1 choice
[ 4369.916418] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4370.125311] usb 2-7: USB disconnect, address 114
[ 4370.125333] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4370.125353] gspca: probe of 2-7:1.0 failed with error -5
[ 4370.368900] usb 2-7: new high speed USB device using ehci_hcd and address 115
[ 4370.541790] usb 2-7: configuration #1 chosen from 1 choice
[ 4370.544568] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4370.753468] usb 2-7: USB disconnect, address 115
[ 4370.753603] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4370.753623] gspca: probe of 2-7:1.0 failed with error -5
[ 4371.020477] usb 2-7: new high speed USB device using ehci_hcd and address 116
[ 4371.193188] usb 2-7: configuration #1 chosen from 1 choice
[ 4371.195944] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4371.404976] usb 2-7: USB disconnect, address 116
[ 4371.405214] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4371.405235] gspca: probe of 2-7:1.0 failed with error -5
[ 4371.662374] usb 2-7: new high speed USB device using ehci_hcd and address 117
[ 4371.835386] usb 2-7: configuration #1 chosen from 1 choice
[ 4371.838208] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4372.046965] usb 2-7: USB disconnect, address 117
[ 4372.047061] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4372.047087] gspca: probe of 2-7:1.0 failed with error -5
[ 4372.319419] usb 2-7: new high speed USB device using ehci_hcd and address 118
[ 4372.492203] usb 2-7: configuration #1 chosen from 1 choice
[ 4372.494999] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4372.703990] usb 2-7: USB disconnect, address 118
[ 4372.704229] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4372.704251] gspca: probe of 2-7:1.0 failed with error -5
[ 4372.978308] usb 2-7: new high speed USB device using ehci_hcd and address 119
[ 4373.151921] usb 2-7: configuration #1 chosen from 1 choice
[ 4373.171149] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4373.378875] usb 2-7: USB disconnect, address 119
[ 4373.378972] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4373.379001] gspca: probe of 2-7:1.0 failed with error -5
[ 4373.615620] usb 2-7: new high speed USB device using ehci_hcd and address 120
[ 4373.788590] usb 2-7: configuration #1 chosen from 1 choice
[ 4373.791412] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4374.000086] usb 2-7: USB disconnect, address 120
[ 4374.000182] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4374.000203] gspca: probe of 2-7:1.0 failed with error -5
[ 4374.249697] usb 2-7: new high speed USB device using ehci_hcd and address 121
[ 4374.423428] usb 2-7: configuration #1 chosen from 1 choice
[ 4374.426081] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4374.634174] usb 2-7: USB disconnect, address 121
[ 4374.634295] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4374.634316] gspca: probe of 2-7:1.0 failed with error -5
[ 4374.904582] usb 2-7: new high speed USB device using ehci_hcd and address 122
[ 4375.077660] usb 2-7: configuration #1 chosen from 1 choice
[ 4375.080499] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4375.289128] usb 2-7: USB disconnect, address 122
[ 4375.289249] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4375.289270] gspca: probe of 2-7:1.0 failed with error -5
[ 4375.559209] usb 2-7: new high speed USB device using ehci_hcd and address 123
[ 4375.732131] usb 2-7: configuration #1 chosen from 1 choice
[ 4375.734850] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4375.943662] usb 2-7: USB disconnect, address 123
[ 4375.943760] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4375.943784] gspca: probe of 2-7:1.0 failed with error -5
[ 4376.215113] usb 2-7: new high speed USB device using ehci_hcd and address 124
[ 4376.387966] usb 2-7: configuration #1 chosen from 1 choice
[ 4376.390801] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found.(VC0321)
[ 4376.599549] usb 2-7: USB disconnect, address 124
[ 4376.599806] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: Failed to configure camera
[ 4376.599828] gspca: probe of 2-7:1.0 failed with error -5
j0hn-e@john-e:~$





[logari81]

αν θελεις να το "διορθωσεις" προσωρινα απενεργοποιώντας τον driver για αυτην την συσκευη τρεξε την εντολή:

Κώδικας: Επιλογή όλων

sudo echo "blacklist gspca" >> /etc/modprobe.d/blacklist

η εντολή αυτην θα προσθεσει την γραμμη
blacklist gspca

στο τελος του αρχειου
/etc/modprobe.d/blacklist

ως αποτελεσμα δεν θα μπορεις μετα να χρησιμοποιεις καμια καμερα απο αυτες που βασιζονται στον συγκεκριμενο driver.

Για να αναιρεσεις την αλλαγη θα μπορεις στο μελλον να ανοιξεις το αρχειο με:

Κώδικας: Επιλογή όλων

sudo gedit /etc/modprobe.d/blacklist

και να σβησεις παλι την σχετικη γραμμη.

Μια καλύτερη λύση θα ηταν να δοκιμασεις το Ubuntu 8.10 όπου εχει βελτιωθει λίγο η υποστηριξη καμερων.

[jonhy]

Ευχαριστω πολυ για την λυση logari81 .

Θα το δοκιμασω ...

...

Κώδικας: Επιλογή όλων

j0hn-e@john-e:~$ sudo echo "blacklist gspca" >> /etc/modprobe.d/blacklist
bash: /etc/modprobe.d/blacklist: Permission denied
j0hn-e@john-e:~$



...μαλλον κατι δεν πηγε καλα εδω .Γιατι;

[linuxman]

Δώσε

Κώδικας: Επιλογή όλων

sudo gedit /etc/modprobe.d/blacklist

Και βάλε κάτω κάτω την παρακάτω γραμμή

Κώδικας: Επιλογή όλων


# blacklisted camera
blacklist gspca


[jonhy]

...σωστος linuxman!

Η εκκινηση εγινε κανονικα...Ευχαριστω φιλε...

[linuxman]

...σωστος linuxman!

Η εκκινηση εγινε κανονικα...Ευχαριστω φιλε...

Μπράβο , ερώτηση για δώσε το αποτέλεσμα από την εντολή

Κώδικας: Επιλογή όλων

uname -a

εγώ έχω το

Κώδικας: Επιλογή όλων

Linux econlab 2.6.24-21-generic #1 SMP Tue Oct 21 23:43:45 UTC 2008 i686 GNU/Linux

εσύ τι έχεις ;

[jonhy]

Σορρυ για την καθυστερημενη απαντηση:

Το ιδιο μου φαινεται εμενα:

Κώδικας: Επιλογή όλων

j0hn-e@john-e:~$ uname -a
Linux john-e 2.6.24-21-generic #1 SMP Tue Oct 21 23:43:45 UTC 2008 i686 GNU/Linux


Γιατι ; τι ειναι αυτο ; για να μαθαινουμε και τιποτε παραπανω σιγα σιγα...

[linuxman]

Σορρυ για την καθυστερημενη απαντηση:

Το ιδιο μου φαινεται εμενα:

Κώδικας: Επιλογή όλων

j0hn-e@john-e:~$ uname -a
Linux john-e 2.6.24-21-generic #1 SMP Tue Oct 21 23:43:45 UTC 2008 i686 GNU/Linux


Γιατι ; τι ειναι αυτο ; για να μαθαινουμε και τιποτε παραπανω σιγα σιγα...

Τι είναι , είναι kernel version με το οποίο τρέχει το σύστημα σου .
Πάλη νομίζω ότι σου λείπει κάτι για την κάμερα για να προκαλεί πρόβλημα στην εκκίνηση .