simosx έγραψε:basoula έγραψε:-rw-r--r-- 1 bill bill 104471 May 5 21:02 sn9c20x.ko
Αυτό σημαίνει ότι μπορείς να (δοκιμάσεις να) εισάγεις το άρθρωμα πυρήνα και να δεις αν θα έχει διαφορά.
Εκτελείς
- Κώδικας: Επιλογή όλων
sudo insmod sn9c20x.ko
Μετά τρέξε
- Κώδικας: Επιλογή όλων
dmesg
και κατέγραψε τις τελευταίες γραμμές. Θα λένε π.χ. «Found camera» ή "Could not load module because ...". Αναφέρεις εδώ το αποτέλεσμα.
Τέλος, δοκιμάζεις με το cheese αν λειτουργεί η κάμερα.
Με το
- Κώδικας: Επιλογή όλων
sudo insmod sn9c20x.ko
- Κώδικας: Επιλογή όλων
bill@bill-desktop:~$ sudo insmod sn9c20x.ko
[sudo] password for bill:
insmod: can't read 'sn9c20x.ko': No such file or directory
Γιατι βγαζει κατι τετοιο αφου το αρχειο υπαρχει!
Με dmesg βγαζει:
- Κώδικας: Επιλογή όλων
bill@bill-desktop:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-29-generic (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #51-Ubuntu SMP Fri Apr 15 17:13:54 UTC 2011 (Ubuntu 2.6.35-29.51-generic 2.6.35.12)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 00000000000a0000 (usable)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] modified: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
[ 0.000000] modified: 000000001fff3000 - 0000000020000000 (ACPI data)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f4a90] f4a90
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fff0000 @ 15000-1a000
[ 0.000000] RAMDISK: 175ef000 - 18034000
[ 0.000000] ACPI: RSDP 000f6570 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 1fff3000 0002C (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: FACP 1fff3040 00074 (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: DSDT 1fff30c0 0365B (v01 GBT AWRDACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS 1fff0000 00040
[ 0.000000] ACPI: APIC 1fff6740 0005A (v01 GBT AWRDACPI 42302E31 AWRD 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0001fff0
[ 0.000000] On node 0 totalpages: 130945
[ 0.000000] free_area_init_node: node 0, pgdat c0802000, node_mem_map c1001020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3953 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125968 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36416 r0 d20928 u4194304
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129921
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-29-generic root=UUID=db6a5088-8f1c-43b8-926c-37e8618f7de7 ro quiet splash
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 2621100 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (42 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a4adc] TEXT DATA BSS
[ 0.000000] #3 [00175ef000 - 0018034000] RAMDISK
[ 0.000000] #4 [00009a5000 - 00009a8092] BRK
[ 0.000000] #5 [00000f4aa0 - 0000100000] BIOS reserved
[ 0.000000] #6 [00000f4a90 - 00000f4aa0] MP-table mpf
[ 0.000000] #7 [000009f000 - 00000f0d20] BIOS reserved
[ 0.000000] #8 [00000f0e38 - 00000f4a90] BIOS reserved
[ 0.000000] #9 [00000f0d20 - 00000f0e38] MP-table mpc
[ 0.000000] #10 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #11 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #12 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #13 [0001000000 - 0001001000] BOOTMEM
[ 0.000000] #14 [0001001000 - 0001401000] BOOTMEM
[ 0.000000] #15 [0001401000 - 0001401004] BOOTMEM
[ 0.000000] #16 [0001401040 - 0001401100] BOOTMEM
[ 0.000000] #17 [0001401100 - 0001401130] BOOTMEM
[ 0.000000] #18 [0001401140 - 0001402940] BOOTMEM
[ 0.000000] #19 [0001402940 - 0001402967] BOOTMEM
[ 0.000000] #20 [0001402980 - 0001402a7c] BOOTMEM
[ 0.000000] #21 [0001402a80 - 0001402ac0] BOOTMEM
[ 0.000000] #22 [0001402ac0 - 0001402b00] BOOTMEM
[ 0.000000] #23 [0001402b00 - 0001402b40] BOOTMEM
[ 0.000000] #24 [0001402b40 - 0001402b80] BOOTMEM
[ 0.000000] #25 [0001402b80 - 0001402bc0] BOOTMEM
[ 0.000000] #26 [0001402bc0 - 0001402c00] BOOTMEM
[ 0.000000] #27 [0001402c00 - 0001402c10] BOOTMEM
[ 0.000000] #28 [0001402c40 - 0001402c50] BOOTMEM
[ 0.000000] #29 [0001402c80 - 0001402cea] BOOTMEM
[ 0.000000] #30 [0001402d00 - 0001402d6a] BOOTMEM
[ 0.000000] #31 [0001800000 - 000180e000] BOOTMEM
[ 0.000000] #32 [0001404d80 - 0001404d84] BOOTMEM
[ 0.000000] #33 [0001404dc0 - 0001404dc4] BOOTMEM
[ 0.000000] #34 [0001404e00 - 0001404e04] BOOTMEM
[ 0.000000] #35 [0001404e40 - 0001404e44] BOOTMEM
[ 0.000000] #36 [0001404e80 - 0001404f30] BOOTMEM
[ 0.000000] #37 [0001404f40 - 0001404fe8] BOOTMEM
[ 0.000000] #38 [0001402d80 - 0001404d80] BOOTMEM
[ 0.000000] #39 [0001405000 - 0001445000] BOOTMEM
[ 0.000000] #40 [0001445000 - 0001465000] BOOTMEM
[ 0.000000] #41 [0001465000 - 00016e4eac] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 497248k/524224k available (4940k kernel code, 26532k reserved, 2333k data, 688k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc081b000 - 0xc08c7000 ( 688 kB)
[ 0.000000] .data : 0xc05d32de - 0xc081a7e8 (2333 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d32de (4940 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2018.968 MHz processor.
[ 0.008010] Calibrating delay loop (skipped), value calculated using timer frequency.. 4037.93 BogoMIPS (lpj=8075872)
[ 0.008019] pid_max: default: 32768 minimum: 301
[ 0.008055] Security Framework initialized
[ 0.008097] AppArmor: AppArmor initialized
[ 0.008101] Yama: becoming mindful.
[ 0.008211] Mount-cache hash table entries: 512
[ 0.008465] Initializing cgroup subsys ns
[ 0.008475] Initializing cgroup subsys cpuacct
[ 0.008483] Initializing cgroup subsys memory
[ 0.008501] Initializing cgroup subsys devices
[ 0.008506] Initializing cgroup subsys freezer
[ 0.008511] Initializing cgroup subsys net_cls
[ 0.008566] CPU0: Hyper-Threading is disabled
[ 0.008574] mce: CPU supports 4 MCE banks
[ 0.008593] CPU0: Thermal monitoring enabled (TM1)
[ 0.008617] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.008658] ... version: 0
[ 0.008662] ... bit width: 40
[ 0.008666] ... generic registers: 18
[ 0.008670] ... value mask: 000000ffffffffff
[ 0.008675] ... max period: 0000007fffffffff
[ 0.008679] ... fixed-purpose events: 0
[ 0.008683] ... event mask: 000000000003ffff
[ 0.012278] SMP alternatives: switching to UP code
[ 0.028801] Freeing SMP alternatives: 24k freed
[ 0.028865] ACPI: Core revision 20100428
[ 0.036016] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036029] ftrace: allocating 21774 entries in 43 pages
[ 0.040192] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040521] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081667] CPU0: Intel(R) Pentium(R) 4 CPU 2.00GHz stepping 04
[ 0.084000] Brought up 1 CPUs
[ 0.084000] Total of 1 processors activated (4037.93 BogoMIPS).
[ 0.084000] devtmpfs: initialized
[ 0.084000] regulator: core version 0.5
[ 0.084000] Time: 17:30:05 Date: 05/08/11
[ 0.084000] NET: Registered protocol family 16
[ 0.084000] EISA bus registered
[ 0.084000] ACPI: bus type pci registered
[ 0.110458] PCI: PCI BIOS revision 2.10 entry at 0xf9d70, last bus=2
[ 0.110463] PCI: Using configuration type 1 for base access
[ 0.112324] bio: create slab <bio-0> at 0
[ 0.113479] ACPI: EC: Look up EC in DSDT
[ 0.119313] ACPI: Interpreter enabled
[ 0.119323] ACPI: (supports S0 S1 S4 S5)
[ 0.119364] ACPI: Using IOAPIC for interrupt routing
[ 0.126581] ACPI: No dock devices found.
[ 0.126590] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.126797] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.127156] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.127162] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored)
[ 0.127169] pci_root PNP0A03:00: host bridge window [io 0x40c0-0x4fff] (ignored)
[ 0.127174] pci_root PNP0A03:00: host bridge window [io 0x5000-0xffff] (ignored)
[ 0.127181] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.127187] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.127193] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xfebfffff] (ignored)
[ 0.127233] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff pref]
[ 0.127470] pci 0000:00:1f.0: quirk: [io 0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
[ 0.127480] pci 0000:00:1f.0: quirk: [io 0x4080-0x40bf] claimed by ICH4 GPIO
[ 0.127536] pci 0000:00:1f.1: reg 20: [io 0xf000-0xf00f]
[ 0.127611] pci 0000:00:1f.2: reg 20: [io 0xb000-0xb01f]
[ 0.127683] pci 0000:00:1f.3: reg 20: [io 0x5000-0x500f]
[ 0.127755] pci 0000:00:1f.4: reg 20: [io 0xb800-0xb81f]
[ 0.127805] pci 0000:00:1f.5: reg 10: [io 0xbc00-0xbcff]
[ 0.127816] pci 0000:00:1f.5: reg 14: [io 0xc000-0xc03f]
[ 0.127906] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xdfffffff pref]
[ 0.127916] pci 0000:01:00.0: reg 14: [io 0x9000-0x90ff]
[ 0.127927] pci 0000:01:00.0: reg 18: [mem 0xe9000000-0xe900ffff]
[ 0.127950] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.127979] pci 0000:01:00.0: supports D1 D2
[ 0.128028] pci 0000:01:00.1: reg 10: [mem 0xe0000000-0xe7ffffff pref]
[ 0.128039] pci 0000:01:00.1: reg 14: [mem 0xe9010000-0xe901ffff]
[ 0.128082] pci 0000:01:00.1: supports D1 D2
[ 0.128137] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.128145] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.128152] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.128160] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff pref]
[ 0.128204] pci 0000:02:01.0: reg 10: [mem 0xea000000-0xea001fff]
[ 0.128279] pci 0000:02:02.0: reg 10: [io 0xa000-0xa0ff]
[ 0.128337] pci 0000:02:02.0: supports D1 D2
[ 0.128391] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.128399] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.128408] pci 0000:00:1e.0: bridge window [mem 0xea000000-0xea0fffff]
[ 0.128417] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.128423] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.128429] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.128447] pci_bus 0000:00: on NUMA node 0
[ 0.128456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.128618] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.151367] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.151546] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.151716] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.151890] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
[ 0.152070] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.152244] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.152414] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.152584] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.152671] HEST: Table is not found!
[ 0.152842] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.152849] vgaarb: loaded
[ 0.153178] SCSI subsystem initialized
[ 0.153337] libata version 3.00 loaded.
[ 0.153441] usbcore: registered new interface driver usbfs
[ 0.153475] usbcore: registered new interface driver hub
[ 0.153532] usbcore: registered new device driver usb
[ 0.153780] ACPI: WMI: Mapper loaded
[ 0.153786] PCI: Using ACPI for IRQ routing
[ 0.153796] PCI: pci_cache_line_size set to 64 bytes
[ 0.153876] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.153882] reserve RAM buffer: 000000001fff0000 - 000000001fffffff
[ 0.154089] NetLabel: Initializing
[ 0.154094] NetLabel: domain hash size = 128
[ 0.154097] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.154127] NetLabel: unlabeled traffic allowed by default
[ 0.154218] Switching to clocksource tsc
[ 0.172272] AppArmor: AppArmor Filesystem Enabled
[ 0.172331] pnp: PnP ACPI init
[ 0.172389] ACPI: bus type pnp registered
[ 0.178195] pnp: PnP ACPI: found 14 devices
[ 0.178200] ACPI: ACPI bus type pnp unregistered
[ 0.178211] PnPBIOS: Disabled by ACPI PNP
[ 0.178240] system 00:00: [mem 0x000cd000-0x000cffff] has been reserved
[ 0.178248] system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.178255] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.178261] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.178268] system 00:00: [mem 0x1fff0000-0x1fffffff] could not be reserved
[ 0.178275] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.178282] system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
[ 0.178289] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.178296] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.178303] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.178309] system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.178316] system 00:00: [mem 0x000e0000-0x000effff] has been reserved
[ 0.178330] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.178336] system 00:02: [io 0x0800-0x0805] has been reserved
[ 0.215745] pci 0000:01:00.0: BAR 6: assigned [mem 0xe8000000-0xe801ffff pref]
[ 0.215754] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.215762] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff]
[ 0.215770] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xe9ffffff]
[ 0.215778] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xe7ffffff pref]
[ 0.215788] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.215795] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
[ 0.215805] pci 0000:00:1e.0: bridge window [mem 0xea000000-0xea0fffff]
[ 0.215812] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.215842] pci 0000:00:1e.0: setting latency timer to 64
[ 0.215851] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.215857] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.215863] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff]
[ 0.215869] pci_bus 0000:01: resource 1 [mem 0xe8000000-0xe9ffffff]
[ 0.215876] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xe7ffffff pref]
[ 0.215882] pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
[ 0.215888] pci_bus 0000:02: resource 1 [mem 0xea000000-0xea0fffff]
[ 0.215894] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.215900] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.215997] NET: Registered protocol family 2
[ 0.216123] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.216491] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.216712] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.216924] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.216930] TCP reno registered
[ 0.216937] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.216955] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.217107] NET: Registered protocol family 1
[ 0.217200] pci 0000:01:00.0: Boot video device
[ 0.217215] PCI: CLS 32 bytes, default 64
[ 0.217652] cpufreq-nforce2: No nForce2 chipset.
[ 0.217709] Scanning for low memory corruption every 60 seconds
[ 0.218084] audit: initializing netlink socket (disabled)
[ 0.218113] type=2000 audit(1304875805.216:1): initialized
[ 0.230456] Trying to unpack rootfs image as initramfs...
[ 0.246408] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.253891] VFS: Disk quotas dquot_6.5.2
[ 0.254080] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.255379] fuse init (API version 7.14)
[ 0.255550] msgmni has been set to 971
[ 0.726997] Freeing initrd memory: 10516k freed
[ 0.761442] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.761451] io scheduler noop registered
[ 0.761456] io scheduler deadline registered
[ 0.761484] io scheduler cfq registered (default)
[ 0.761717] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.761758] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.762151] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.762166] ACPI: Power Button [PWRB]
[ 0.762253] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.762270] ACPI: Sleep Button [SLPB]
[ 0.762368] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.762376] ACPI: Power Button [PWRF]
[ 0.762704] ACPI: acpi_idle registered with cpuidle
[ 0.765677] ERST: Table is not found!
[ 0.765757] isapnp: Scanning for PnP cards...
[ 0.771553] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.771691] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.771812] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.772309] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.772485] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.774572] brd: module loaded
[ 0.775504] loop: module loaded
[ 0.775937] ata_piix 0000:00:1f.1: version 2.13
[ 0.776082] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.819910] scsi0 : ata_piix
[ 0.820082] scsi1 : ata_piix
[ 0.821548] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.821555] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.822209] Fixed MDIO Bus: probed
[ 0.822280] PPP generic driver version 2.4.2
[ 0.822426] tun: Universal TUN/TAP device driver, 1.6
[ 0.822431] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.822599] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.822631] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.822653] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.822737] alloc irq_desc for 19 on node -1
[ 0.822742] alloc kstat_irqs on node -1
[ 0.822760] uhci_hcd 0000:00:1f.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.822778] uhci_hcd 0000:00:1f.2: setting latency timer to 64
[ 0.822786] uhci_hcd 0000:00:1f.2: UHCI Host Controller
[ 0.822850] uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
[ 0.822906] uhci_hcd 0000:00:1f.2: irq 19, io base 0x0000b000
[ 0.823175] hub 1-0:1.0: USB hub found
[ 0.823188] hub 1-0:1.0: 2 ports detected
[ 0.823284] alloc irq_desc for 23 on node -1
[ 0.823289] alloc kstat_irqs on node -1
[ 0.823299] uhci_hcd 0000:00:1f.4: PCI INT C -> GSI 23 (level, low) -> IRQ 23
[ 0.823311] uhci_hcd 0000:00:1f.4: setting latency timer to 64
[ 0.823318] uhci_hcd 0000:00:1f.4: UHCI Host Controller
[ 0.823378] uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
[ 0.823421] uhci_hcd 0000:00:1f.4: irq 23, io base 0x0000b800
[ 0.823643] hub 2-0:1.0: USB hub found
[ 0.823652] hub 2-0:1.0: 2 ports detected
[ 0.823862] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.823868] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.824693] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.824886] mice: PS/2 mouse device common for all mice
[ 0.825416] rtc_cmos 00:04: RTC can wake from S4
[ 0.825497] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.825537] rtc0: alarms up to one month, 242 bytes nvram
[ 0.825782] device-mapper: uevent: version 1.0.3
[ 0.826194] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.826301] device-mapper: multipath: version 1.1.1 loaded
[ 0.826306] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.826527] EISA: Probing bus 0 at eisa.0
[ 0.826554] Cannot allocate resource for EISA slot 4
[ 0.826559] Cannot allocate resource for EISA slot 5
[ 0.826577] EISA: Detected 0 cards.
[ 0.826668] cpuidle: using governor ladder
[ 0.826674] cpuidle: using governor menu
[ 0.827211] TCP cubic registered
[ 0.827462] NET: Registered protocol family 10
[ 0.828084] lo: Disabled Privacy Extensions
[ 0.828451] NET: Registered protocol family 17
[ 0.828578] Using IPI No-Shortcut mode
[ 0.828756] PM: Resume from disk failed.
[ 0.828781] registered taskstats version 1
[ 0.829003] Magic number: 11:873:541
[ 0.829144] rtc_cmos 00:04: setting system clock to 2011-05-08 17:30:06 UTC (1304875806)
[ 0.829151] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.829155] EDD information not available.
[ 1.135323] isapnp: No Plug & Play device found
[ 1.135712] ata2.00: ATAPI: SONY CD-RW CRX210E1, 2YS1, max UDMA/33
[ 1.135774] ata2.01: ATAPI: TOSHIBA DVD-ROM SD-M1712, 1004, max UDMA/33
[ 1.143361] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.148432] ata1.00: HPA unlocked: 156250000 -> 156301488, native 156301488
[ 1.148442] ata1.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100
[ 1.148448] ata1.00: 156301488 sectors, multi 16: LBA
[ 1.148639] ata2.00: configured for UDMA/33
[ 1.164438] ata2.01: configured for UDMA/33
[ 1.165616] ata1.00: configured for UDMA/100
[ 1.165853] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5
[ 1.166136] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.166298] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.166398] sd 0:0:0:0: [sda] Write Protect is off
[ 1.166405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.166448] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.166788] sda:
[ 1.178897] scsi 1:0:0:0: CD-ROM SONY CD-RW CRX210E1 2YS1 PQ: 0 ANSI: 5
[ 1.191229] sda1 sda2 <
[ 1.200033] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 1.212796] sda5sr0: scsi3-mmc drive: 124x/40x writer cd/rw xa/form2 cdda tray
[ 1.227771] Uniform CD-ROM driver Revision: 3.20
[ 1.227993] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.228134] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.231795] sda6 >
[ 1.232377] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.233499] scsi 1:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-M1712 1004 PQ: 0 ANSI: 5
[ 1.240567] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 1.240772] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 1.240889] sr 1:0:1:0: Attached scsi generic sg2 type 5
[ 1.240979] Freeing unused kernel memory: 688k freed
[ 1.242790] Write protecting the kernel text: 4944k
[ 1.242848] Write protecting the kernel read-only data: 1976k
[ 1.292363] udev[66]: starting version 163
[ 1.367250] hub 1-1:1.0: USB hub found
[ 1.369137] hub 1-1:1.0: 4 ports detected
[ 1.484299] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 1.725185] usb 1-1.3: new low speed USB device using uhci_hcd and address 4
[ 1.738994] Floppy drive(s): fd0 is 1.44M
[ 1.764046] FDC 0 is a post-1991 82077
[ 1.817396] alloc irq_desc for 21 on node -1
[ 1.817404] alloc kstat_irqs on node -1
[ 1.817422] b43-pci-bridge 0000:02:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.836076] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 1.836090] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 1.836101] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 1.836112] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 1.876258] ssb: Sonics Silicon Backplane found on PCI device 0000:02:01.0
[ 1.918478] usbcore: registered new interface driver hiddev
[ 1.973875] input: Microsoft Microsoft Wireless Optical Mouse�� 1.00 as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1.3/1-1.3:1.0/input/input4
[ 1.974338] generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse�� 1.00] on usb-0000:00:1f.2-1.3/input0
[ 1.974794] usbcore: registered new interface driver usbhid
[ 1.974801] usbhid: USB HID core driver
[ 2.177613] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 20.345870] Adding 1192956k swap on /dev/sda6. Priority:-1 extents:1 across:1192956k
[ 20.444058] udev[289]: starting version 163
[ 20.592853] lp: driver loaded but no devices found
[ 20.706327] intel_rng: FWH not detected
[ 20.864267] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.044538] Linux agpgart interface v0.103
[ 21.268777] parport_pc 00:0a: reported by Plug and Play ACPI
[ 21.268833] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 21.282478] gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 817kHz
[ 21.368566] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 21.426865] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 21.437388] lp0: using parport0 (interrupt-driven).
[ 21.551840] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 21.685773] Linux video capture interface: v2.00
[ 21.746313] cfg80211: Calling CRDA to update world regulatory domain
[ 21.974346] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47pre49
[ 21.975614] usb 1-2: SN9C120 PC Camera Controller detected (vid:pid 0x0C45:0x613B)
[ 22.001546] ppdev: user-space parallel port driver
[ 22.100430] cfg80211: World regulatory domain updated:
[ 22.100443] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 22.100450] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.100456] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.100462] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 22.100468] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.100474] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 22.201908] [drm] Initialized drm 1.1.0 20060810
[ 22.222830] usb 1-2: OV7660 image sensor detected
[ 22.262489] type=1400 audit(1304865027.928:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=559 comm="apparmor_parser"
[ 22.263363] type=1400 audit(1304865027.928:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=559 comm="apparmor_parser"
[ 22.263843] type=1400 audit(1304865027.928:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=559 comm="apparmor_parser"
[ 22.322254] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 22.931571] [drm] radeon defaulting to kernel modesetting.
[ 22.931581] [drm] radeon kernel modesetting enabled.
[ 22.931698] alloc irq_desc for 16 on node -1
[ 22.931703] alloc kstat_irqs on node -1
[ 22.931722] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.988146] phy0: Selected rate control algorithm 'minstrel'
[ 22.989310] Registered led device: b43-phy0::tx
[ 22.989345] Registered led device: b43-phy0::rx
[ 22.989376] Registered led device: b43-phy0::assoc
[ 22.989409] Registered led device: b43-phy0::radio
[ 22.989574] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
[ 23.050220] [drm] initializing kernel modesetting (RV280 0x1002:0x5960).
[ 23.064212] [drm] register mmio base: 0xE9000000
[ 23.064219] [drm] register mmio size: 65536
[ 23.064553] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 23.064582] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 23.064611] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 23.064635] radeon 0000:01:00.0: GTT: 128M 0xD0000000 - 0xD7FFFFFF
[ 23.064642] [drm] Generation 2 PCI interface, using max accessible memory
[ 23.064651] radeon 0000:01:00.0: VRAM: 128M 0xD8000000 - 0xDFFFFFFF (128M used)
[ 23.064729] [drm] radeon: irq initialized.
[ 23.064919] [drm] Detected VRAM RAM=128M, BAR=128M
[ 23.064927] [drm] RAM width 64bits DDR
[ 23.092400] [TTM] Zone kernel: Available graphics memory: 254238 kiB.
[ 23.092408] [TTM] Initializing pool allocator.
[ 23.092469] [drm] radeon: 128M of VRAM memory ready
[ 23.092474] [drm] radeon: 128M of GTT memory ready.
[ 23.092667] [drm] Loading R200 Microcode
[ 23.103020] alloc irq_desc for 22 on node -1
[ 23.103029] alloc kstat_irqs on node -1
[ 23.103047] C-Media PCI 0000:02:02.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 23.173833] [drm] radeon: ring at 0x00000000D0000000
[ 23.173862] [drm] ring test succeeded in 1 usecs
[ 23.174426] [drm] radeon: ib pool ready.
[ 23.174592] [drm] ib test succeeded in 0 usecs
[ 23.174840] [drm] Default TV standard: PAL
[ 23.174844] [drm] 27.000000000 MHz TV ref clk
[ 23.174851] [drm] DFP table revision: 4
[ 23.174939] [drm] Default TV standard: PAL
[ 23.174943] [drm] 27.000000000 MHz TV ref clk
[ 23.175000] [drm] Radeon Display Connectors
[ 23.175005] [drm] Connector 0:
[ 23.175008] [drm] VGA
[ 23.175014] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 23.175018] [drm] Encoders:
[ 23.175022] [drm] CRT1: INTERNAL_DAC1
[ 23.175027] [drm] Connector 1:
[ 23.175030] [drm] DVI-I
[ 23.175034] [drm] HPD1
[ 23.175040] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 23.175043] [drm] Encoders:
[ 23.175047] [drm] CRT2: INTERNAL_DAC2
[ 23.175052] [drm] DFP1: INTERNAL_TMDS1
[ 23.175056] [drm] Connector 2:
[ 23.175059] [drm] S-video
[ 23.175063] [drm] Encoders:
[ 23.175067] [drm] TV1: INTERNAL_DAC2
[ 23.276377] alloc irq_desc for 17 on node -1
[ 23.276385] alloc kstat_irqs on node -1
[ 23.276404] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 23.276438] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 23.344820] usb 1-2: Initialization succeeded
[ 23.345070] usb 1-2: V4L2 device registered as video0
[ 23.345076] usb 1-2: Optional device control through 'sysfs' interface disabled
[ 23.345127] usbcore: registered new interface driver sn9c102
[ 23.636109] intel8x0_measure_ac97_clock: measured 54668 usecs (2628 samples)
[ 23.636118] intel8x0: clocking to 48000
[ 23.743451] type=1400 audit(1304865029.408:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=761 comm="apparmor_parser"
[ 23.792934] type=1400 audit(1304865029.460:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
[ 23.793422] type=1400 audit(1304865029.460:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
[ 23.934030] type=1400 audit(1304865029.600:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=769 comm="apparmor_parser"
[ 23.987416] type=1400 audit(1304865029.652:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=769 comm="apparmor_parser"
[ 24.016522] type=1400 audit(1304865029.684:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=769 comm="apparmor_parser"
[ 24.153497] type=1400 audit(1304865029.820:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=788 comm="apparmor_parser"
[ 24.183201] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
[ 24.284352] [drm] fb mappable at 0xD8040000
[ 24.284360] [drm] vram apper at 0xD8000000
[ 24.284364] [drm] size 5242880
[ 24.284368] [drm] fb depth is 24
[ 24.284372] [drm] pitch is 5120
[ 24.339227] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.403393] Console: switching to colour frame buffer device 160x64
[ 24.438708] fb0: radeondrmfb frame buffer device
[ 24.438713] drm: registered panic notifier
[ 24.458002] Slow work thread pool: Starting up
[ 24.476292] Slow work thread pool: Ready
[ 24.476320] [drm] Initialized radeon 2.5.0 20080528 for 0000:01:00.0 on minor 0
[ 27.320481] wlan0: authenticate with 00:26:44:09:95:55 (try 1)
[ 27.322279] wlan0: authenticated
[ 27.322667] wlan0: associate with 00:26:44:09:95:55 (try 1)
[ 27.326010] wlan0: RX AssocResp from 00:26:44:09:95:55 (capab=0x411 status=0 aid=1)
[ 27.326017] wlan0: associated
[ 27.327307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 27.895043] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[ 34.144271] usb 1-2: usb_submit_urb() failed, error -28
[ 37.824022] wlan0: no IPv6 routers present
[ 57.563529] usb 1-2: usb_submit_urb() failed, error -28
[ 66.887044] lo: Disabled Privacy Extensions
bill@bill-desktop:~$
