Δεν βλέπει την καρτα τηλεόρασης

από **stavrozgr** » 05 Ιουν 2011, 22:20

Η κάρτα είναι της terratec και είναι η cinergy hybrid stick ειναι usb

ορίστε και τα αποτελέσματα απο lsusb

Κώδικας: Επιλογή όλων: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 04b4:0060 Cypress Semiconductor Corp. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 6000:0002 Bus 001 Device 002: ID 04f2:b210 Chicony Electronics Co., Ltd Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

καμια ιδέα ? :?:

από **vagrale13** » 06 Ιουν 2011, 01:45

Δωσε μας και τα αποτελεσματα απο

Κώδικας: Επιλογή όλων: dmesg lsmod

οπως επισης, πες μας αν προκειται για την εκδοση Ubuntu Lucid 10.04 που γραφεις στην υπογραφη σου.

από **stavrozgr** » 06 Ιουν 2011, 10:10

dmesg

Κώδικας: Επιλογή όλων: [ 0.124067] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.124070] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.124072] system 00:01: iomem range 0xfed80000-0xfed80fff has been reserved [ 0.124075] system 00:01: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.124077] system 00:01: iomem range 0xfed80000-0xfed80fff has been reserved [ 0.124086] system 00:09: ioport range 0x400-0x4cf has been reserved [ 0.124088] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.124090] system 00:09: ioport range 0x4d6-0x4d6 has been reserved [ 0.124092] system 00:09: ioport range 0x550-0x550 has been reserved [ 0.124095] system 00:09: ioport range 0x680-0x6ff has been reserved [ 0.124097] system 00:09: ioport range 0x77a-0x77a has been reserved [ 0.124099] system 00:09: ioport range 0xc00-0xc01 has been reserved [ 0.124101] system 00:09: ioport range 0xc14-0xc14 has been reserved [ 0.124104] system 00:09: ioport range 0xc50-0xc52 has been reserved [ 0.124106] system 00:09: ioport range 0xc6c-0xc6c has been reserved [ 0.124108] system 00:09: ioport range 0xc6f-0xc6f has been reserved [ 0.124110] system 00:09: ioport range 0xcd0-0xcdb has been reserved [ 0.124113] system 00:09: ioport range 0x380-0x387 has been reserved [ 0.124117] system 00:0a: iomem range 0xe0000-0xfffff could not be reserved [ 0.124120] system 00:0a: iomem range 0xffe00000-0xffffffff has been reserved [ 0.158879] pci 0000:03:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] [ 0.158902] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.158904] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.158908] pci 0000:00:01.0: MEM window: 0x90200000-0x903fffff [ 0.158910] pci 0000:00:01.0: PREFETCH window: 0x00000080000000-0x0000008fffffff [ 0.158915] pci 0000:00:05.0: PCI bridge, secondary bus 0000:02 [ 0.158917] pci 0000:00:05.0: IO window: 0x1000-0x1fff [ 0.158920] pci 0000:00:05.0: MEM window: 0x90100000-0x901fffff [ 0.158923] pci 0000:00:05.0: PREFETCH window: 0x00000070000000-0x000000701fffff [ 0.158927] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03 [ 0.158929] pci 0000:00:06.0: IO window: 0x2000-0x2fff [ 0.158932] pci 0000:00:06.0: MEM window: 0x70200000-0x702fffff [ 0.158935] pci 0000:00:06.0: PREFETCH window: 0x00000090000000-0x000000900fffff [ 0.158938] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04 [ 0.158940] pci 0000:00:14.4: IO window: disabled [ 0.158944] pci 0000:00:14.4: MEM window: disabled [ 0.158948] pci 0000:00:14.4: PREFETCH window: disabled [ 0.158958] pci 0000:00:01.0: setting latency timer to 64 [ 0.158965] alloc irq_desc for 17 on node -1 [ 0.158967] alloc kstat_irqs on node -1 [ 0.158972] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.158975] pci 0000:00:05.0: setting latency timer to 64 [ 0.158980] alloc irq_desc for 18 on node -1 [ 0.158981] alloc kstat_irqs on node -1 [ 0.158984] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.158986] pci 0000:00:06.0: setting latency timer to 64 [ 0.158994] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.158996] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.158998] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff] [ 0.159000] pci_bus 0000:01: resource 1 mem: [0x90200000-0x903fffff] [ 0.159002] pci_bus 0000:01: resource 2 pref mem [0x80000000-0x8fffffff] [ 0.159005] pci_bus 0000:02: resource 0 io: [0x1000-0x1fff] [ 0.159007] pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff] [ 0.159009] pci_bus 0000:02: resource 2 pref mem [0x70000000-0x701fffff] [ 0.159011] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 0.159013] pci_bus 0000:03: resource 1 mem: [0x70200000-0x702fffff] [ 0.159015] pci_bus 0000:03: resource 2 pref mem [0x90000000-0x900fffff] [ 0.159017] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.159019] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.159048] NET: Registered protocol family 2 [ 0.159123] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.159355] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.159929] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.160232] TCP: Hash tables configured (established 131072 bind 65536) [ 0.160234] TCP reno registered [ 0.160316] NET: Registered protocol family 1 [ 0.270136] pci 0000:01:05.0: Boot video device [ 0.270228] Simple Boot Flag at 0x44 set to 0x1 [ 0.270329] cpufreq-nforce2: No nForce2 chipset. [ 0.270351] Scanning for low memory corruption every 60 seconds [ 0.270434] audit: initializing netlink socket (disabled) [ 0.270443] type=2000 audit(1307314725.270:1): initialized [ 0.278216] Trying to unpack rootfs image as initramfs... [ 0.286282] highmem bounce pool size: 64 pages [ 0.286288] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.291241] VFS: Disk quotas dquot_6.5.2 [ 0.291292] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.291730] fuse init (API version 7.13) [ 0.291791] msgmni has been set to 1696 [ 0.298406] alg: No test for stdrng (krng) [ 0.298474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.298477] io scheduler noop registered [ 0.298478] io scheduler anticipatory registered [ 0.298480] io scheduler deadline registered [ 0.298512] io scheduler cfq registered (default) [ 0.298634] alloc irq_desc for 24 on node -1 [ 0.298636] alloc kstat_irqs on node -1 [ 0.298643] pcieport 0000:00:05.0: irq 24 for MSI/MSI-X [ 0.298650] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.298732] alloc irq_desc for 25 on node -1 [ 0.298734] alloc kstat_irqs on node -1 [ 0.298738] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X [ 0.298742] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.298791] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.298853] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.299351] ACPI: AC Adapter [ACAD] (on-line) [ 0.299398] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.299401] ACPI: Power Button [PWRB] [ 0.299443] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.299991] ACPI: Lid Switch [LID] [ 0.300023] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.300025] ACPI: Power Button [PWRF] [ 0.300389] ACPI: processor limited to max C-state 1 [ 0.300407] processor LNXCPU:00: registered as cooling_device0 [ 0.307091] ACPI Exception: AE_OK, No or invalid critical threshold (20090903/thermal-386) [ 0.308310] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.309261] brd: module loaded [ 0.309581] loop: module loaded [ 0.309648] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.309949] Fixed MDIO Bus: probed [ 0.309974] PPP generic driver version 2.4.2 [ 0.309999] tun: Universal TUN/TAP device driver, 1.6 [ 0.310001] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.310055] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.310117] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.314334] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 0.314339] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.314395] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.314444] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.314467] ehci_hcd 0000:00:12.2: debug port 1 [ 0.314488] ehci_hcd 0000:00:12.2: irq 17, io mem 0x90408600 [ 0.314635] isapnp: Scanning for PnP cards... [ 0.378112] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.378221] usb usb1: configuration #1 chosen from 1 choice [ 0.378266] hub 1-0:1.0: USB hub found [ 0.378274] hub 1-0:1.0: 5 ports detected [ 0.378326] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.378343] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 0.378346] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.378374] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.378386] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.378409] ehci_hcd 0000:00:13.2: debug port 1 [ 0.378421] ehci_hcd 0000:00:13.2: irq 17, io mem 0x90408500 [ 0.390312] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.390437] usb usb2: configuration #1 chosen from 1 choice [ 0.390461] hub 2-0:1.0: USB hub found [ 0.390468] hub 2-0:1.0: 5 ports detected [ 0.390576] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.390593] ehci_hcd 0000:00:16.2: setting latency timer to 64 [ 0.390596] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 0.390624] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 0.390636] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.390656] ehci_hcd 0000:00:16.2: debug port 1 [ 0.390669] ehci_hcd 0000:00:16.2: irq 17, io mem 0x90408400 [ 0.390774] ACPI: Battery Slot [BAT0] (battery present) [ 0.402118] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.402220] usb usb3: configuration #1 chosen from 1 choice [ 0.402243] hub 3-0:1.0: USB hub found [ 0.402250] hub 3-0:1.0: 4 ports detected [ 0.402334] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.402387] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.402405] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 0.402408] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.402439] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 0.402467] ohci_hcd 0000:00:12.0: irq 18, io mem 0x90407000 [ 0.498211] usb usb4: configuration #1 chosen from 1 choice [ 0.498236] hub 4-0:1.0: USB hub found [ 0.498313] hub 4-0:1.0: 5 ports detected [ 0.498366] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.498384] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 0.498388] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.498418] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.498439] ohci_hcd 0000:00:13.0: irq 18, io mem 0x90406000 [ 0.610309] usb usb5: configuration #1 chosen from 1 choice [ 0.610335] hub 5-0:1.0: USB hub found [ 0.610382] hub 5-0:1.0: 5 ports detected [ 0.610446] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.610465] ohci_hcd 0000:00:14.5: setting latency timer to 64 [ 0.610468] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.610495] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 0.610516] ohci_hcd 0000:00:14.5: irq 18, io mem 0x90405000 [ 0.649092] Freeing initrd memory: 7782k freed [ 0.707624] usb usb6: configuration #1 chosen from 1 choice [ 0.707648] hub 6-0:1.0: USB hub found [ 0.707696] hub 6-0:1.0: 2 ports detected [ 0.707749] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.707765] ohci_hcd 0000:00:16.0: setting latency timer to 64 [ 0.707769] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 0.707798] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 0.707820] ohci_hcd 0000:00:16.0: irq 18, io mem 0x90404000 [ 0.758945] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.806660] usb usb7: configuration #1 chosen from 1 choice [ 0.806678] hub 7-0:1.0: USB hub found [ 0.806722] hub 7-0:1.0: 4 ports detected [ 0.806766] uhci_hcd: USB Universal Host Controller Interface driver [ 0.806835] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.824015] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.824020] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.824109] mice: PS/2 mouse device common for all mice [ 0.825371] rtc_cmos 00:05: RTC can wake from S4 [ 0.825403] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.825427] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.825506] device-mapper: uevent: version 1.0.3 [ 0.825590] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.825629] device-mapper: multipath: version 1.1.0 loaded [ 0.825631] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.825712] EISA: Probing bus 0 at eisa.0 [ 0.825753] Cannot allocate resource for EISA slot 1 [ 0.825755] Cannot allocate resource for EISA slot 2 [ 0.825757] Cannot allocate resource for EISA slot 3 [ 0.825759] Cannot allocate resource for EISA slot 4 [ 0.825774] EISA: Detected 0 cards. [ 0.825804] cpuidle: using governor ladder [ 0.825806] cpuidle: using governor menu [ 0.826119] TCP cubic registered [ 0.826236] NET: Registered protocol family 10 [ 0.826590] lo: Disabled Privacy Extensions [ 0.826833] NET: Registered protocol family 17 [ 0.826857] powernow-k8: Found 1 AMD V140 Processor processors (1 cpu cores) (version 2.20.00) [ 0.826898] powernow-k8: 0 : pstate 0 (2300 MHz) [ 0.826900] powernow-k8: 1 : pstate 1 (1700 MHz) [ 0.826901] powernow-k8: 2 : pstate 2 (800 MHz) [ 0.826931] Using IPI No-Shortcut mode [ 0.826989] PM: Resume from disk failed. [ 0.826998] registered taskstats version 1 [ 0.827363] Magic number: 15:152:1007 [ 0.827400] system 00:09: hash matches [ 0.827449] rtc_cmos 00:05: setting system clock to 2011-06-05 22:58:46 UTC (1307314726) [ 0.827451] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.827453] EDD information not available. [ 0.921809] isapnp: No Plug & Play device found [ 0.921835] Freeing unused kernel memory: 668k freed [ 0.922132] Write protecting the kernel text: 4676k [ 0.922157] Write protecting the kernel read-only data: 1844k [ 0.932040] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.937778] udev: starting version 151 [ 0.955636] usb 1-1: configuration #1 chosen from 1 choice [ 1.068118] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.137352] ahci 0000:00:11.0: version 3.0 [ 1.137401] alloc irq_desc for 19 on node -1 [ 1.137403] alloc kstat_irqs on node -1 [ 1.137410] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.137495] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.137499] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.138069] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.138142] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.138298] r8169 0000:03:00.0: setting latency timer to 64 [ 1.138330] alloc irq_desc for 26 on node -1 [ 1.138332] alloc kstat_irqs on node -1 [ 1.138346] r8169 0000:03:00.0: irq 26 for MSI/MSI-X [ 1.138884] eth0: RTL8102e at 0xf80a8000, 98:4b:e1:9f:68:e7, XID 04e00000 IRQ 26 [ 1.143005] scsi0 : ahci [ 1.143127] scsi1 : ahci [ 1.143231] ata1: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408100 irq 19 [ 1.143234] ata2: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408180 irq 19 [ 1.515460] usb 1-3: configuration #1 chosen from 1 choice [ 1.624124] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.624150] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.624387] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133 [ 1.624391] ata1.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.624741] ata1.00: configured for UDMA/133 [ 1.626248] ata2.00: ATAPI: hp CDDVDW TS-L633R, 0200, max UDMA/100 [ 1.630900] ata2.00: configured for UDMA/100 [ 1.640271] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5 [ 1.640413] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.640612] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.640644] sd 0:0:0:0: [sda] Write Protect is off [ 1.640646] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.640662] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.640760] sda: sda1 sda2 < sda5 > [ 1.641895] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.648596] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633R 0200 PQ: 0 ANSI: 5 [ 1.662070] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.662074] Uniform CD-ROM driver Revision: 3.20 [ 1.662173] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.662224] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.701454] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 1.872078] usb 5-2: new low speed USB device using ohci_hcd and address 2 [ 1.941713] Adding 1648632k swap on /dev/sda5. Priority:-1 extents:1 across:1648632k SS [ 1.980650] udev: starting version 151 [ 2.042130] usb 5-2: configuration #1 chosen from 1 choice [ 2.225036] lib80211: common routines for IEEE802.11 drivers [ 2.225053] lib80211_crypt: registered algorithm 'NULL' [ 2.249963] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 2.249968] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 2.250056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.253792] wl: module license 'MIXED/Proprietary' taints kernel. [ 2.253796] Disabling lock debugging due to kernel taint [ 2.296655] lp: driver loaded but no devices found [ 2.430044] acpi device:03: registered as cooling_device1 [ 2.430365] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5 [ 2.430432] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.443701] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.443709] wl 0000:02:00.0: setting latency timer to 64 [ 2.455160] ACPI: resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SMBI [0xb00-0xb0f] [ 2.455164] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.468739] Linux video capture interface: v2.00 [ 2.505374] usbcore: registered new interface driver hiddev [ 2.510850] input: Areson USB Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input6 [ 2.511237] generic-usb 0003:04B4:0060.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:13.0-2/input0 [ 2.515397] uvcvideo: Found UVC 1.00 device HP Webcam-101 (04f2:b210) [ 2.518916] generic-usb 0003:04B4:0060.0002: hiddev96,hidraw1: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:13.0-2/input1 [ 2.518941] usbcore: registered new interface driver usbhid [ 2.519042] usbhid: v2.6:USB HID core driver [ 2.531192] vga16fb: initializing [ 2.531197] vga16fb: mapped to 0xc00a0000 [ 2.531302] fb0: VGA16 VGA frame buffer device [ 2.537310] input: HP Webcam-101 as /devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input7 [ 2.537361] usbcore: registered new interface driver uvcvideo [ 2.537363] USB Video Class driver (v0.1.0) [ 2.557642] Linux agpgart interface v0.103 [ 2.862589] Console: switching to colour frame buffer device 80x30 [ 2.899724] type=1505 audit(1307303928.568:2): operation="profile_load" pid=707 name="/sbin/dhclient3" [ 2.899977] type=1505 audit(1307303928.568:3): operation="profile_load" pid=707 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 2.900177] type=1505 audit(1307303928.572:4): operation="profile_load" pid=707 name="/usr/lib/connman/scripts/dhclient-script" [ 3.024347] lib80211_crypt: registered algorithm 'TKIP' [ 3.024783] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.60.48.36 [ 3.027028] [fglrx] Maximum main memory to use for locked dma buffers: 1640 MBytes. [ 3.027069] [fglrx] vendor: 1002 device: 9712 count: 1 [ 3.027280] [fglrx] ioport: bar 1, base 0x3000, size: 0x100 [ 3.027295] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.027300] pci 0000:01:05.0: setting latency timer to 64 [ 3.027487] [fglrx] Kernel PAT support is enabled [ 3.027506] [fglrx] module loaded - fglrx 8.72.11 [Apr 8 2010] with 1 minors [ 3.253408] type=1505 audit(1307303928.924:5): operation="profile_load" pid=812 name="/usr/share/gdm/guest-session/Xsession" [ 3.257960] type=1505 audit(1307303928.928:6): operation="profile_replace" pid=814 name="/sbin/dhclient3" [ 3.258222] type=1505 audit(1307303928.928:7): operation="profile_replace" pid=814 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 3.258371] type=1505 audit(1307303928.928:8): operation="profile_replace" pid=814 name="/usr/lib/connman/scripts/dhclient-script" [ 3.281228] type=1505 audit(1307303928.952:9): operation="profile_load" pid=816 name="/usr/bin/evince" [ 3.288565] type=1505 audit(1307303928.960:10): operation="profile_load" pid=816 name="/usr/bin/evince-previewer" [ 3.361751] r8169: eth0: link down [ 3.361890] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.365973] alloc irq_desc for 16 on node -1 [ 3.365976] alloc kstat_irqs on node -1 [ 3.365983] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.366082] HDA Intel 0000:00:14.2: setting latency timer to 64 [ 3.445845] hda_codec: ALC259: BIOS auto-probing. [ 3.447117] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8 [ 3.789882] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000 [ 3.789885] Synaptics: Clickpad mode enabled [ 3.798181] ppdev: user-space parallel port driver [ 3.872446] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 4.090658] [fglrx] ATIF platform detected with notification ID: 0x81 [ 4.514091] [fglrx] GART Table is not in FRAME_BUFFER range [ 4.514259] alloc irq_desc for 27 on node -1 [ 4.514262] alloc kstat_irqs on node -1 [ 4.514270] fglrx_pci 0000:01:05.0: irq 27 for MSI/MSI-X [ 4.514769] [fglrx] Firegl kernel thread PID: 1131 [ 4.515050] [fglrx] IRQ 27 Enabled [ 4.696074] [fglrx] Gart USWC size:547 M. [ 4.696077] [fglrx] Gart cacheable size:215 M. [ 4.696082] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 4.696084] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 13.656027] eth1: no IPv6 routers present [ 5727.921985] __ratelimit: 12 callbacks suppressed [ 5727.921990] mission-control[2373]: segfault at 0 ip 080795f2 sp bf9d3200 error 4 in mission-control-5[8048000+43000] [20076.030370] PM: Syncing filesystems ... done. [20076.031581] PM: Preparing system for mem sleep [20076.031584] Freezing user space processes ... (elapsed 0.00 seconds) done. [20076.033719] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [20076.033780] PM: Entering mem sleep [20076.033796] Suspending console(s) (use no_console_suspend to debug) [20076.048121] sd 0:0:0:0: [sda] Synchronizing SCSI cache [20076.048310] sd 0:0:0:0: [sda] Stopping disk [20076.405888] PM: suspend of drv:sd dev:0:0:0:0 complete after 357.767 msecs [20076.867605] PM: suspend of drv:psmouse dev:serio1 complete after 431.430 msecs [20076.972111] PM: suspend of drv:atkbd dev:serio0 complete after 104.497 msecs [20076.975447] wl 0000:02:00.0: PCI INT A disabled [20076.988269] [fglrx] IRQ 27 Disabled [20076.988296] [fglrx] Preparing suspend fglrx in kernel. [20077.016447] [fglrx] Suspending fglrx in kernel completed. [20077.016451] [fglrx] Power down the ASIC . [20077.016507] ehci_hcd 0000:00:16.2: PCI INT B disabled [20077.016514] ohci_hcd 0000:00:16.0: PCI INT A disabled [20077.016520] ohci_hcd 0000:00:14.5: PCI INT C disabled [20077.120176] HDA Intel 0000:00:14.2: PCI INT A disabled [20077.136114] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 119.586 msecs [20077.136126] ehci_hcd 0000:00:13.2: PCI INT B disabled [20077.136133] ohci_hcd 0000:00:13.0: PCI INT A disabled [20077.136139] ehci_hcd 0000:00:12.2: PCI INT B disabled [20077.136145] ohci_hcd 0000:00:12.0: PCI INT A disabled [20077.168191] ahci 0000:00:11.0: PCI INT A disabled [20077.168244] PM: suspend of devices complete after 1134.307 msecs [20077.168246] PM: suspend devices took 1.136 seconds [20077.168391] r8169 0000:03:00.0: PME# enabled [20077.232172] PM: late suspend of devices complete after 63.920 msecs [20077.232218] ACPI: Preparing to enter system sleep state S3 [20077.322253] Disabling non-boot CPUs ... [20077.322269] Back to C! [20077.322269] ACPI: Waking up from system sleep state S3 [20077.410078] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2203131, writing 0x22203131) [20077.410100] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [20077.410123] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x20002121, writing 0x2121) [20077.410128] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [20077.410166] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007) [20077.424137] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [20077.440136] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [20077.456135] ehci_hcd 0000:00:16.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [20077.456184] fglrx_pci 0000:01:05.0: restoring config space at offset 0x1 (was 0x100003, writing 0x100403) [20077.456234] wl 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [20077.472192] r8169 0000:03:00.0: restoring config space at offset 0xb (was 0x813610ec, writing 0x1604103c) [20077.472211] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [20077.472274] PM: early resume of devices complete after 62.237 msecs [20077.486598] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [20077.486690] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [20077.508088] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [20077.508101] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [20077.532117] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [20077.532131] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [20077.532163] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [20077.556118] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [20077.580117] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [20077.580147] fglrx_pci 0000:01:05.0: setting latency timer to 64 [20077.583359] [fglrx] Power up the ASIC [20077.583381] [fglrx] Preparing resume fglrx in kernel. [20077.614104] [fglrx] Resuming fglrx in kernel completed. [20077.614285] [fglrx] IRQ 27 Enabled [20077.614323] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [20077.614328] wl 0000:02:00.0: setting latency timer to 64 [20077.663419] r8169 0000:03:00.0: PME# disabled [20077.792091] PM: resume of drv:usb dev:usb1 complete after 128.599 msecs [20077.968091] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [20077.968119] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [20077.968695] ata1.00: configured for UDMA/133 [20077.986657] ata2.00: configured for UDMA/100 [20078.116085] usb 1-3: reset high speed USB device using ehci_hcd and address 3 [20078.551209] PM: resume of drv:usb dev:1-3 complete after 546.546 msecs [20078.551216] sd 0:0:0:0: [sda] Starting disk [20078.554197] PM: resume of devices complete after 1081.868 msecs [20078.554309] PM: resume devices took 1.080 seconds [20078.554332] PM: Finishing wakeup. [20078.554333] Restarting tasks ... done. [20078.711407] r8169: eth0: link down [20078.713403] ADDRCONF(NETDEV_UP): eth0: link is not ready [20079.502409] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input10 [20081.331424] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04771/0xe40000 [20081.331427] Synaptics: Clickpad mode enabled [20081.413739] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [20081.450761] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input12 [20089.184136] eth1: no IPv6 routers present

και lsmod

Κώδικας: Επιλογή όλων: Module Size Used by michael_mic 1732 8 arc4 1153 4 binfmt_misc 6587 1 joydev 8740 0 ppdev 5259 0 snd_hda_codec_realtek 216061 1 snd_hda_intel 20799 2 snd_hda_codec 87096 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 5668 1 snd_hda_codec snd_pcm_oss 34603 0 snd_mixer_oss 13929 1 snd_pcm_oss snd_pcm 71646 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_seq_dummy 1498 0 snd_seq_oss 27626 0 snd_seq_midi 4621 0 snd_rawmidi 19141 1 snd_seq_midi snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi snd_seq 48042 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 18710 2 snd_pcm,snd_seq snd_seq_device 6052 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq lib80211_crypt_tkip 7596 0 fglrx 2092908 32 fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit snd 56687 18 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq,snd_timer,snd_seq_device agpgart 31724 1 fglrx vga16fb 11385 1 vgastate 8961 1 vga16fb uvcvideo 57374 0 usbhid 36110 0 soundcore 6620 1 snd videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev psmouse 63245 0 serio_raw 3978 0 snd_page_alloc 7140 2 snd_hda_intel,snd_pcm i2c_piix4 8335 0 hid 67096 1 usbhid wl 1959598 0 lib80211 5046 2 lib80211_crypt_tkip,wl video 17375 0 output 1871 1 video shpchp 28835 0 lp 7028 0 parport 32635 2 ppdev,lp r8169 34140 0 mii 4381 1 r8169 ahci 32360 2

ναι είναι η εκδοση της υπογραφής μου .

από **ubuntunoid** » 06 Ιουν 2011, 10:25

http://ubuntuforums.org/archive/index.php/t-1448404.html

από **stavrozgr** » 06 Ιουν 2011, 10:40

απο οτι καταλαβα φίλε μου αφορουν μονο την ψηφιακή αυτα που λένε...
και δεν πολυκαταλαβα την διαδικασια... (αρχαριος)

από **stavrozgr** » 28 Σεπ 2011, 09:57

Μετά απο τρεις μήνες και με την 11,04 πλέον επανέρχομαι στο πρόβλημα μου...

συνεχίζω να μην έχω τηλεόραση :wtf:

κάθε βοήθειά σας πολύτιμη.

lsusb

Κώδικας: Επιλογή όλων: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 04b4:0060 Cypress Semiconductor Corp. Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 04f2:b210 Chicony Electronics Co., Ltd Bus 001 Device 002: ID 0ccd:00a5 TerraTec Electronic GmbH Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg

Κώδικας: Επιλογή όλων: [ 0.159551] NET: Registered protocol family 2 [ 0.159606] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.159792] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.160404] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.160711] TCP: Hash tables configured (established 131072 bind 65536) [ 0.160713] TCP reno registered [ 0.160717] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.160728] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.160824] NET: Registered protocol family 1 [ 0.160835] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.272110] pci 0000:01:05.0: Boot video device [ 0.272122] PCI: CLS 64 bytes, default 64 [ 0.272182] Simple Boot Flag at 0x44 set to 0x1 [ 0.272313] cpufreq-nforce2: No nForce2 chipset. [ 0.272424] audit: initializing netlink socket (disabled) [ 0.272433] type=2000 audit(1317165456.272:1): initialized [ 0.281037] Trying to unpack rootfs image as initramfs... [ 0.296227] highmem bounce pool size: 64 pages [ 0.296234] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.304484] VFS: Disk quotas dquot_6.5.2 [ 0.304553] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.305182] fuse init (API version 7.16) [ 0.305260] msgmni has been set to 1684 [ 0.312214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.312241] io scheduler noop registered [ 0.312243] io scheduler deadline registered [ 0.312260] io scheduler cfq registered (default) [ 0.312361] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.312392] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X [ 0.312436] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.312458] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 0.312518] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.312537] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.313203] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.313733] ACPI: AC Adapter [ACAD] (on-line) [ 0.313785] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.313790] ACPI: Power Button [PWRB] [ 0.313835] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.314355] ACPI: Lid Switch [LID] [ 0.314391] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.314394] ACPI: Power Button [PWRF] [ 0.314504] ACPI: acpi_idle registered with cpuidle [ 0.314528] ACPI: processor limited to max C-state 1 [ 0.317439] [Firmware Bug]: Invalid critical threshold (0) [ 0.319016] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.319018] ACPI: Thermal Zone [THRM] (70 C) [ 0.319098] ERST: Table is not found! [ 0.319183] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.320265] Linux agpgart interface v0.103 [ 0.321409] brd: module loaded [ 0.321866] loop: module loaded [ 0.321942] i2c-core: driver [adp5520] using legacy suspend method [ 0.321944] i2c-core: driver [adp5520] using legacy resume method [ 0.322307] Fixed MDIO Bus: probed [ 0.322337] PPP generic driver version 2.4.2 [ 0.322372] tun: Universal TUN/TAP device driver, 1.6 [ 0.322373] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.322433] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.322485] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.322502] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 0.322506] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.322535] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.322547] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.322550] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.322573] ehci_hcd 0000:00:12.2: debug port 1 [ 0.322595] ehci_hcd 0000:00:12.2: irq 17, io mem 0x90408600 [ 0.328458] isapnp: Scanning for PnP cards... [ 0.382765] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.382913] hub 1-0:1.0: USB hub found [ 0.382916] hub 1-0:1.0: 5 ports detected [ 0.382993] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.383011] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 0.383015] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.383051] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.383066] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.383069] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.383090] ehci_hcd 0000:00:13.2: debug port 1 [ 0.383102] ehci_hcd 0000:00:13.2: irq 17, io mem 0x90408500 [ 0.392027] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.392209] hub 2-0:1.0: USB hub found [ 0.392213] hub 2-0:1.0: 5 ports detected [ 0.392290] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.392312] ehci_hcd 0000:00:16.2: setting latency timer to 64 [ 0.392315] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 0.392349] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 0.392358] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.392362] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.392385] ehci_hcd 0000:00:16.2: debug port 1 [ 0.392399] ehci_hcd 0000:00:16.2: irq 17, io mem 0x90408400 [ 0.402722] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.402731] ACPI: Battery Slot [BAT0] (battery present) [ 0.404421] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.404557] hub 3-0:1.0: USB hub found [ 0.404561] hub 3-0:1.0: 4 ports detected [ 0.404633] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.404656] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.404679] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 0.404683] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.404718] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 0.404751] ohci_hcd 0000:00:12.0: irq 18, io mem 0x90407000 [ 0.564490] hub 4-0:1.0: USB hub found [ 0.564502] hub 4-0:1.0: 5 ports detected [ 0.564580] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.564602] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 0.564606] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.564641] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.564666] ohci_hcd 0000:00:13.0: irq 18, io mem 0x90406000 [ 0.720148] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 0.756390] hub 5-0:1.0: USB hub found [ 0.756402] hub 5-0:1.0: 5 ports detected [ 0.756480] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.756502] ohci_hcd 0000:00:14.5: setting latency timer to 64 [ 0.756505] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.756540] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 0.756565] ohci_hcd 0000:00:14.5: irq 18, io mem 0x90405000 [ 0.820269] hub 6-0:1.0: USB hub found [ 0.820281] hub 6-0:1.0: 2 ports detected [ 0.820353] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.820374] ohci_hcd 0000:00:16.0: setting latency timer to 64 [ 0.820378] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 0.820417] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 0.820443] ohci_hcd 0000:00:16.0: irq 18, io mem 0x90404000 [ 0.884349] hub 7-0:1.0: USB hub found [ 0.884357] hub 7-0:1.0: 4 ports detected [ 0.884427] uhci_hcd: USB Universal Host Controller Interface driver [ 0.884512] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.915368] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.915382] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.920426] mousedev: PS/2 mouse device common for all mice [ 0.920606] rtc_cmos 00:05: RTC can wake from S4 [ 0.920646] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.920677] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.920767] device-mapper: uevent: version 1.0.3 [ 0.920834] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.967481] isapnp: No Plug & Play device found [ 0.967517] device-mapper: multipath: version 1.2.0 loaded [ 0.967519] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.967591] EISA: Probing bus 0 at eisa.0 [ 0.967594] EISA: Cannot allocate resource for mainboard [ 0.967596] Cannot allocate resource for EISA slot 1 [ 0.967597] Cannot allocate resource for EISA slot 2 [ 0.967599] Cannot allocate resource for EISA slot 3 [ 0.967600] Cannot allocate resource for EISA slot 4 [ 0.967602] Cannot allocate resource for EISA slot 5 [ 0.967603] Cannot allocate resource for EISA slot 6 [ 0.967605] Cannot allocate resource for EISA slot 7 [ 0.967606] Cannot allocate resource for EISA slot 8 [ 0.967608] EISA: Detected 0 cards. [ 0.971548] cpuidle: using governor ladder [ 0.971552] cpuidle: using governor menu [ 0.971797] TCP cubic registered [ 0.971928] NET: Registered protocol family 10 [ 0.972443] NET: Registered protocol family 17 [ 0.972463] Registering the dns_resolver key type [ 0.972481] powernow-k8: Found 1 AMD V140 Processor (1 cpu cores) (version 2.20.00) [ 0.972516] powernow-k8: 0 : pstate 0 (2300 MHz) [ 0.972517] powernow-k8: 1 : pstate 1 (1700 MHz) [ 0.972519] powernow-k8: 2 : pstate 2 (800 MHz) [ 0.972554] Using IPI No-Shortcut mode [ 0.972657] PM: Hibernation image not present or could not be loaded. [ 0.972667] registered taskstats version 1 [ 0.972933] Magic number: 11:209:303 [ 0.972969] tty tty32: hash matches [ 0.973035] rtc_cmos 00:05: setting system clock to 2011-09-27 23:17:38 UTC (1317165458) [ 0.973038] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.973040] EDD information not available. [ 1.000844] Freeing initrd memory: 12552k freed [ 1.006430] Freeing unused kernel memory: 700k freed [ 1.006760] Write protecting the kernel text: 5192k [ 1.006789] Write protecting the kernel read-only data: 2148k [ 1.019464] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.027758] <30>udev[61]: starting version 167 [ 1.092074] usb 1-3: new high speed USB device using ehci_hcd and address 3 [ 1.190832] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.190859] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.190894] r8169 0000:03:00.0: setting latency timer to 64 [ 1.190938] r8169 0000:03:00.0: irq 42 for MSI/MSI-X [ 1.191337] r8169 0000:03:00.0: eth0: RTL8102e at 0xf804e000, 98:4b:e1:9f:68:e7, XID 04e00000 IRQ 42 [ 1.247337] ahci 0000:00:11.0: version 3.0 [ 1.247362] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.247450] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.247453] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.247915] scsi0 : ahci [ 1.248198] scsi1 : ahci [ 1.248277] ata1: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408100 irq 19 [ 1.248281] ata2: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408180 irq 19 [ 1.280056] Refined TSC clocksource calibration: 2294.255 MHz. [ 1.280064] Switching to clocksource tsc [ 1.740063] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.740092] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.740326] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133 [ 1.740330] ata1.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.740617] ata1.00: configured for UDMA/133 [ 1.740721] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5 [ 1.740879] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.741065] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.741114] sd 0:0:0:0: [sda] Write Protect is off [ 1.741117] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.741133] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.741988] sda: sda1 sda2 < sda5 > [ 1.742381] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.743464] ata2.00: ATAPI: hp CDDVDW TS-L633R, 0200, max UDMA/100 [ 1.745981] ata2.00: configured for UDMA/100 [ 1.761218] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633R 0200 PQ: 0 ANSI: 5 [ 1.778485] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.778490] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.778615] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.778676] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.796039] usb 5-2: new low speed USB device using ohci_hcd and address 2 [ 1.833312] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.074171] Adding 1827836k swap on /dev/sda5. Priority:-1 extents:1 across:1827836k SS [ 2.099881] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 2.130459] <30>udev[305]: starting version 167 [ 2.170242] lp: driver loaded but no devices found [ 2.358513] type=1400 audit(1317165459.882:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=424 comm="apparmor_parser" [ 2.359189] type=1400 audit(1317165459.882:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser" [ 2.359413] type=1400 audit(1317165459.882:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 2.567968] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f] [ 2.567972] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.584418] r8169 0000:03:00.0: eth0: link down [ 2.586334] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.666629] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 1235 [ 2.666634] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 2.668924] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.731608] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 2.731743] SP5100 TCO timer: mmio address 0xb8fe00 already in use [ 2.734669] lib80211: common routines for IEEE802.11 drivers [ 2.734675] lib80211_crypt: registered algorithm 'NULL' [ 2.865504] wl: module license 'MIXED/Proprietary' taints kernel. [ 2.865509] Disabling lock debugging due to kernel taint [ 3.114065] acpi device:04: registered as cooling_device1 [ 3.164914] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input4 [ 3.171390] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.199117] type=1400 audit(1317165460.722:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=659 comm="apparmor_parser" [ 3.207961] type=1400 audit(1317165460.730:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=660 comm="apparmor_parser" [ 3.215668] type=1400 audit(1317165460.738:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=660 comm="apparmor_parser" [ 3.215897] type=1400 audit(1317165460.738:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=660 comm="apparmor_parser" [ 3.225781] type=1400 audit(1317165460.750:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=661 comm="apparmor_parser" [ 3.243986] type=1400 audit(1317165460.766:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=661 comm="apparmor_parser" [ 3.333014] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 3.333022] wl 0000:02:00.0: setting latency timer to 64 [ 3.465608] lib80211_crypt: registered algorithm 'TKIP' [ 3.718535] input: Areson USB Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input5 [ 3.718691] generic-usb 0003:04B4:0060.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:13.0-2/input0 [ 3.727885] generic-usb 0003:04B4:0060.0002: hiddev0,hidraw1: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:13.0-2/input1 [ 3.727922] usbcore: registered new interface driver usbhid [ 3.727925] usbhid: USB HID core driver [ 3.839639] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) [ 3.839648] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f4431360), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.839658] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f4431480), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.839693] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) [ 3.839698] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f4431360), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.839732] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f4431480), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.846414] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 3.850627] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) [ 3.850636] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f4431360), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.850646] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f4431480), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.850657] hp-wmi: probe of hp-wmi failed with error -22 [ 3.884825] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 4.099365] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 4.107123] [fglrx] Maximum main memory to use for locked dma buffers: 1639 MBytes. [ 4.107170] [fglrx] vendor: 1002 device: 9712 count: 1 [ 4.107415] [fglrx] ioport: bar 1, base 0x3000, size: 0x100 [ 4.107431] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.107435] pci 0000:01:05.0: setting latency timer to 64 [ 4.107687] [fglrx] Kernel PAT support is enabled [ 4.107707] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors [ 4.169474] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.169521] HDA Intel 0000:00:14.2: setting latency timer to 64 [ 4.181666] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400 [ 4.204269] hda-intel: Enable sync_write for AMD chipset [ 4.242264] hda_codec: ALC270: BIOS auto-probing. [ 4.252660] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 4.252825] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 4.266527] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9 [ 4.337043] vesafb: framebuffer at 0x80000000, mapped to 0xf9680000, using 4160k, total 4160k [ 4.337047] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 4.337049] vesafb: scrolling: redraw [ 4.337052] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.337231] Console: switching to colour frame buffer device 170x48 [ 4.337262] fb0: VESA VGA frame buffer device [ 4.353128] ppdev: user-space parallel port driver [ 4.515471] [fglrx] ATIF platform detected with notification ID: 0x81 [ 4.566878] [fglrx] GART Table is not in FRAME_BUFFER range [ 4.567207] [fglrx] Could not enable MSI; System prevented initialization [ 4.567749] [fglrx] Firegl kernel thread PID: 1089 [ 4.567789] [fglrx] Firegl kernel thread PID: 1090 [ 4.567826] [fglrx] Firegl kernel thread PID: 1091 [ 4.568125] [fglrx] IRQ 18 Enabled [ 4.800581] [fglrx] Gart USWC size:548 M. [ 4.800585] [fglrx] Gart cacheable size:215 M. [ 4.800590] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 4.800592] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 8.052596] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.944051] eth1: no IPv6 routers present [ 8917.133189] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 8920.369781] PM: Syncing filesystems ... done. [ 8920.370992] PM: Preparing system for mem sleep [ 8920.371000] Freezing user space processes ... (elapsed 0.01 seconds) done. [ 8920.384088] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 8920.400108] PM: Entering mem sleep [ 8920.400283] Suspending console(s) (use no_console_suspend to debug) [ 8920.401398] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 8920.401492] sd 0:0:0:0: [sda] Stopping disk [ 8920.490600] i8042 aux 00:08: wake-up capability disabled by ACPI [ 8920.490619] i8042 kbd 00:07: wake-up capability enabled by ACPI [ 8920.490689] wl 0000:02:00.0: PCI INT A disabled [ 8920.490813] [fglrx] IRQ 18 Disabled [ 8920.490930] [fglrx] Preparing suspend fglrx in kernel. [ 8920.519808] [fglrx] Suspending fglrx in kernel completed. [ 8920.519813] [fglrx] Power down the ASIC . [ 8920.519841] fglrx_pci 0000:01:05.0: PCI INT A disabled [ 8920.519897] ehci_hcd 0000:00:16.2: PCI INT B disabled [ 8920.519908] ohci_hcd 0000:00:16.0: PCI INT A disabled [ 8920.519918] ohci_hcd 0000:00:14.5: PCI INT C disabled [ 8920.520780] ehci_hcd 0000:00:13.2: PCI INT B disabled [ 8920.520789] ohci_hcd 0000:00:13.0: PCI INT A disabled [ 8920.520803] ehci_hcd 0000:00:12.2: PCI INT B disabled [ 8920.520811] ohci_hcd 0000:00:12.0: PCI INT A disabled [ 8920.624148] HDA Intel 0000:00:14.2: PCI INT A disabled [ 8920.640085] PM: suspend of drv:HDA Intel dev:0000:00:14.2 complete after 120.149 msecs [ 8920.767095] PM: suspend of drv:sd dev:0:0:0:0 complete after 365.694 msecs [ 8920.767108] PM: suspend of drv:scsi dev:target0:0:0 complete after 365.677 msecs [ 8920.767114] PM: suspend of drv:scsi dev:host0 complete after 365.650 msecs [ 8920.767204] ahci 0000:00:11.0: PCI INT A disabled [ 8920.767210] PM: suspend of drv:ahci dev:0000:00:11.0 complete after 246.396 msecs [ 8920.767219] PM: suspend of drv: dev:pci0000:00 complete after 246.356 msecs [ 8920.767223] PM: suspend of devices complete after 366.770 msecs [ 8920.767226] PM: suspend devices took 0.364 seconds [ 8920.767371] r8169 0000:03:00.0: PME# enabled [ 8920.767403] pcieport 0000:00:06.0: wake-up capability enabled by ACPI [ 8920.828180] PM: late suspend of devices complete after 60.946 msecs [ 8920.828226] ACPI: Preparing to enter system sleep state S3 [ 8920.918046] PM: Saving platform NVS memory [ 8920.928919] Disabling non-boot CPUs ... [ 8920.928919] Back to C! [ 8920.928919] PM: Restoring platform NVS memory [ 8920.928919] ACPI: Waking up from system sleep state S3 [ 8921.017966] pci 0000:00:01.0: restoring config space at offset 0x7 (was 0x2203131, writing 0x22203131) [ 8921.017989] pcieport 0000:00:05.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 8921.018013] pcieport 0000:00:06.0: restoring config space at offset 0x7 (was 0x20002121, writing 0x2121) [ 8921.018018] pcieport 0000:00:06.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 8921.018058] ahci 0000:00:11.0: restoring config space at offset 0x1 (was 0x2300003, writing 0x2300007) [ 8921.032085] ehci_hcd 0000:00:12.2: BAR 0: set to [mem 0x90408600-0x904086ff] (PCI address [0x90408600-0x904086ff]) [ 8921.032115] ehci_hcd 0000:00:12.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [ 8921.048084] ehci_hcd 0000:00:13.2: BAR 0: set to [mem 0x90408500-0x904085ff] (PCI address [0x90408500-0x904085ff]) [ 8921.048113] ehci_hcd 0000:00:13.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [ 8921.064085] ehci_hcd 0000:00:16.2: BAR 0: set to [mem 0x90408400-0x904084ff] (PCI address [0x90408400-0x904084ff]) [ 8921.064113] ehci_hcd 0000:00:16.2: restoring config space at offset 0x1 (was 0x2b00000, writing 0x2b00013) [ 8921.064205] wl 0000:02:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006) [ 8921.080107] r8169 0000:03:00.0: restoring config space at offset 0xb (was 0x813610ec, writing 0x1604103c) [ 8921.080122] r8169 0000:03:00.0: restoring config space at offset 0x1 (was 0x100007, writing 0x100407) [ 8921.080243] PM: early resume of devices complete after 62.327 msecs [ 8921.080407] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 8921.080447] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8921.080467] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8921.080524] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8921.080554] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8921.080570] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8921.080602] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8921.080616] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8921.080634] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8921.080770] fglrx_pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8921.080774] fglrx_pci 0000:01:05.0: setting latency timer to 64 [ 8921.084044] [fglrx] Power up the ASIC [ 8921.084067] [fglrx] Preparing resume fglrx in kernel. [ 8921.113789] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8921.113794] wl 0000:02:00.0: setting latency timer to 64 [ 8921.182341] [fglrx] Resuming fglrx in kernel completed. [ 8921.182541] [fglrx] IRQ 18 Enabled [ 8921.182548] PM: resume of drv:fglrx_pci dev:0000:01:05.0 complete after 101.790 msecs [ 8921.183083] sd 0:0:0:0: [sda] Starting disk [ 8921.183239] pcieport 0000:00:06.0: wake-up capability disabled by ACPI [ 8921.183245] r8169 0000:03:00.0: PME# disabled [ 8921.194337] i8042 kbd 00:07: wake-up capability disabled by ACPI [ 8921.311182] PM: resume of drv:usb dev:5-2 complete after 128.048 msecs [ 8921.311196] PM: resume of drv:usbhid dev:5-2:1.0 complete after 128.055 msecs [ 8921.311202] PM: resume of drv:usbhid dev:5-2:1.1 complete after 128.007 msecs [ 8921.311207] PM: resume of drv: dev:ep_00 complete after 127.992 msecs [ 8921.311211] PM: resume of drv: dev:ep_81 complete after 128.029 msecs [ 8921.311215] PM: resume of drv: dev:ep_82 complete after 128.010 msecs [ 8921.312083] PM: resume of drv:usb dev:usb1 complete after 131.461 msecs [ 8921.312098] PM: resume of drv:hub dev:1-0:1.0 complete after 131.477 msecs [ 8921.312103] PM: resume of drv: dev:ep_00 complete after 131.453 msecs [ 8921.312147] PM: resume of drv: dev:ep_81 complete after 131.522 msecs [ 8921.360596] PM: resume of drv:usb dev:1-1 complete after 177.688 msecs [ 8921.360607] PM: resume of drv:usb dev:1-1:1.0 complete after 177.693 msecs [ 8921.360614] PM: resume of drv: dev:ep_00 complete after 177.624 msecs [ 8921.360618] PM: resume of drv: dev:ep_81 complete after 177.663 msecs [ 8921.360622] PM: resume of drv: dev:ep_82 complete after 177.655 msecs [ 8921.360626] PM: resume of drv: dev:ep_83 complete after 177.647 msecs [ 8921.424089] usb 1-3: reset high speed USB device using ehci_hcd and address 3 [ 8921.596058] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8921.596088] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8921.596617] ata1.00: configured for UDMA/133 [ 8921.612276] PM: resume of drv:sd dev:0:0:0:0 complete after 429.191 msecs [ 8921.612285] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 429.170 msecs [ 8921.612290] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 409.644 msecs [ 8921.614490] ata2.00: configured for UDMA/100 [ 8921.856284] PM: resume of drv:usb dev:1-3 complete after 673.273 msecs [ 8921.856300] PM: resume of drv:usb dev:1-3:1.0 complete after 673.282 msecs [ 8921.856305] PM: resume of drv:usb dev:1-3:1.1 complete after 673.246 msecs [ 8921.856309] PM: resume of drv: dev:ep_00 complete after 673.240 msecs [ 8921.856315] PM: resume of drv: dev:ep_83 complete after 673.286 msecs [ 8921.856320] PM: resume of devices complete after 775.996 msecs [ 8921.856441] PM: resume devices took 0.776 seconds [ 8921.856470] PM: Finishing wakeup. [ 8921.856471] Restarting tasks ... done. [ 8921.871023] video LNXVIDEO:00: Restoring backlight state [ 8922.237161] r8169 0000:03:00.0: eth0: link down [ 8922.237692] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8923.346756] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 8932.368018] eth1: no IPv6 routers present

από **xaris2335** » 28 Σεπ 2011, 14:03

λοιπόν σου λύπει το φιρμγουερ xc3028L-v36.fw , οπότε δοκίμασε να δώσεις

Κώδικας: Επιλογή όλων: wget http://steventoth.net/linux/hvr1400/xc3028L-v36.fw sudo cp xc3028L-v36.fw /lib/firmware

επανεκκίνηση και πες.

από **stavrozgr** » 28 Σεπ 2011, 21:10

με ποιο προγραμμα να δοκιμασω να ανοιξω την tv ? το caffeine μονο ψηφιακη γραφει ενα κουμπακι αλλα οταν το ανοιγω δεν βλεπει το tuner μου,..

δες και τα αποτελέσματα...

dmesg

Κώδικας: Επιλογή όλων: [ 0.122333] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.122369] pnp 00:03: [io 0x0000-0x000f] [ 0.122371] pnp 00:03: [io 0x0081-0x008f] [ 0.122373] pnp 00:03: [io 0x00c0-0x00df] [ 0.122377] pnp 00:03: [dma 4] [ 0.122405] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.122413] pnp 00:04: [io 0x00f0-0x00fe] [ 0.122420] pnp 00:04: [irq 13] [ 0.122446] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.122476] pnp 00:05: [io 0x0070-0x0071] [ 0.122503] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.122509] pnp 00:06: [io 0x0061] [ 0.122535] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.122544] pnp 00:07: [io 0x0060] [ 0.122546] pnp 00:07: [io 0x0064] [ 0.122550] pnp 00:07: [irq 1] [ 0.122580] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.122589] pnp 00:08: [irq 12] [ 0.122622] pnp 00:08: Plug and Play ACPI device, IDs SYN1e35 SYN1e00 SYN0002 PNP0f13 (active) [ 0.122632] pnp 00:09: [io 0x0010-0x001f] [ 0.122634] pnp 00:09: [io 0x002e-0x002f] [ 0.122636] pnp 00:09: [io 0x0072-0x0073] [ 0.122638] pnp 00:09: [io 0x0080] [ 0.122640] pnp 00:09: [io 0x00b0-0x00b1] [ 0.122641] pnp 00:09: [io 0x0092] [ 0.122643] pnp 00:09: [io 0x0400-0x04cf] [ 0.122645] pnp 00:09: [io 0x04d0-0x04d1] [ 0.122647] pnp 00:09: [io 0x04d6] [ 0.122648] pnp 00:09: [io 0x0550] [ 0.122650] pnp 00:09: [io 0x0680-0x06ff] [ 0.122652] pnp 00:09: [io 0x077a] [ 0.122654] pnp 00:09: [io 0x0c00-0x0c01] [ 0.122655] pnp 00:09: [io 0x0c14] [ 0.122657] pnp 00:09: [io 0x0c50-0x0c52] [ 0.122659] pnp 00:09: [io 0x0c6c] [ 0.122661] pnp 00:09: [io 0x0c6f] [ 0.122662] pnp 00:09: [io 0x0cd0-0x0cdb] [ 0.122664] pnp 00:09: [io 0x0380-0x0387] [ 0.122710] system 00:09: [io 0x0400-0x04cf] has been reserved [ 0.122712] system 00:09: [io 0x04d0-0x04d1] has been reserved [ 0.122715] system 00:09: [io 0x04d6] has been reserved [ 0.122718] system 00:09: [io 0x0550] has been reserved [ 0.122720] system 00:09: [io 0x0680-0x06ff] has been reserved [ 0.122723] system 00:09: [io 0x077a] has been reserved [ 0.122725] system 00:09: [io 0x0c00-0x0c01] has been reserved [ 0.122728] system 00:09: [io 0x0c14] has been reserved [ 0.122730] system 00:09: [io 0x0c50-0x0c52] has been reserved [ 0.122733] system 00:09: [io 0x0c6c] has been reserved [ 0.122735] system 00:09: [io 0x0c6f] has been reserved [ 0.122738] system 00:09: [io 0x0cd0-0x0cdb] has been reserved [ 0.122740] system 00:09: [io 0x0380-0x0387] has been reserved [ 0.122743] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.122781] pnp 00:0a: [mem 0x000e0000-0x000fffff] [ 0.122783] pnp 00:0a: [mem 0xffe00000-0xffffffff] [ 0.122824] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.122827] system 00:0a: [mem 0xffe00000-0xffffffff] has been reserved [ 0.122829] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.123238] pnp: PnP ACPI: found 11 devices [ 0.123242] ACPI: ACPI bus type pnp unregistered [ 0.123245] PnPBIOS: Disabled by ACPI PNP [ 0.159243] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.159270] pci 0000:00:05.0: BAR 15: assigned [mem 0x90500000-0x906fffff 64bit pref] [ 0.159276] pci 0000:00:06.0: BAR 14: assigned [mem 0x90700000-0x907fffff] [ 0.159280] pci 0000:00:05.0: BAR 13: assigned [io 0x1000-0x1fff] [ 0.159283] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.159285] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] [ 0.159289] pci 0000:00:01.0: bridge window [mem 0x90200000-0x903fffff] [ 0.159292] pci 0000:00:01.0: bridge window [mem 0x80000000-0x8fffffff 64bit pref] [ 0.159296] pci 0000:00:05.0: PCI bridge to [bus 02-02] [ 0.159298] pci 0000:00:05.0: bridge window [io 0x1000-0x1fff] [ 0.159301] pci 0000:00:05.0: bridge window [mem 0x90100000-0x901fffff] [ 0.159305] pci 0000:00:05.0: bridge window [mem 0x90500000-0x906fffff 64bit pref] [ 0.159310] pci 0000:03:00.0: BAR 6: assigned [mem 0x90020000-0x9002ffff pref] [ 0.159312] pci 0000:00:06.0: PCI bridge to [bus 03-03] [ 0.159315] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff] [ 0.159318] pci 0000:00:06.0: bridge window [mem 0x90700000-0x907fffff] [ 0.159321] pci 0000:00:06.0: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 0.159325] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 0.159327] pci 0000:00:14.4: bridge window [io disabled] [ 0.159335] pci 0000:00:14.4: bridge window [mem disabled] [ 0.159339] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.159349] pci 0000:00:01.0: setting latency timer to 64 [ 0.159363] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.159366] pci 0000:00:05.0: setting latency timer to 64 [ 0.159373] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.159375] pci 0000:00:06.0: setting latency timer to 64 [ 0.159383] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.159385] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.159387] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.159389] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.159391] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.159394] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.159396] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.159398] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.159400] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.159402] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.159404] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.159407] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.159409] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.159411] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.159414] pci_bus 0000:00: resource 18 [mem 0x80000000-0xf7ffffff] [ 0.159416] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.159418] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff] [ 0.159421] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] [ 0.159423] pci_bus 0000:01: resource 1 [mem 0x90200000-0x903fffff] [ 0.159425] pci_bus 0000:01: resource 2 [mem 0x80000000-0x8fffffff 64bit pref] [ 0.159428] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] [ 0.159430] pci_bus 0000:02: resource 1 [mem 0x90100000-0x901fffff] [ 0.159432] pci_bus 0000:02: resource 2 [mem 0x90500000-0x906fffff 64bit pref] [ 0.159434] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 0.159437] pci_bus 0000:03: resource 1 [mem 0x90700000-0x907fffff] [ 0.159439] pci_bus 0000:03: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 0.159441] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] [ 0.159443] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] [ 0.159446] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] [ 0.159448] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.159450] pci_bus 0000:04: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.159452] pci_bus 0000:04: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.159454] pci_bus 0000:04: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.159457] pci_bus 0000:04: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.159459] pci_bus 0000:04: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.159461] pci_bus 0000:04: resource 13 [mem 0x000dc000-0x000dffff] [ 0.159463] pci_bus 0000:04: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.159465] pci_bus 0000:04: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.159467] pci_bus 0000:04: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.159469] pci_bus 0000:04: resource 17 [mem 0x000ec000-0x000effff] [ 0.159472] pci_bus 0000:04: resource 18 [mem 0x80000000-0xf7ffffff] [ 0.159474] pci_bus 0000:04: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.159476] pci_bus 0000:04: resource 20 [mem 0xfed45000-0xffffffff] [ 0.159508] NET: Registered protocol family 2 [ 0.159563] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.159754] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.160368] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.160673] TCP: Hash tables configured (established 131072 bind 65536) [ 0.160676] TCP reno registered [ 0.160680] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.160690] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.160786] NET: Registered protocol family 1 [ 0.160797] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.272109] pci 0000:01:05.0: Boot video device [ 0.272122] PCI: CLS 64 bytes, default 64 [ 0.272181] Simple Boot Flag at 0x44 set to 0x1 [ 0.272311] cpufreq-nforce2: No nForce2 chipset. [ 0.272421] audit: initializing netlink socket (disabled) [ 0.272430] type=2000 audit(1317230162.272:1): initialized [ 0.281032] Trying to unpack rootfs image as initramfs... [ 0.296218] highmem bounce pool size: 64 pages [ 0.296225] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.304468] VFS: Disk quotas dquot_6.5.2 [ 0.304536] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.305163] fuse init (API version 7.16) [ 0.305241] msgmni has been set to 1684 [ 0.312204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.312231] io scheduler noop registered [ 0.312233] io scheduler deadline registered [ 0.312249] io scheduler cfq registered (default) [ 0.312353] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.312384] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X [ 0.312427] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.312450] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X [ 0.312510] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.312530] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.313176] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.313709] ACPI: AC Adapter [ACAD] (on-line) [ 0.313760] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.313765] ACPI: Power Button [PWRB] [ 0.313809] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.314330] ACPI: Lid Switch [LID] [ 0.314367] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.314370] ACPI: Power Button [PWRF] [ 0.314480] ACPI: acpi_idle registered with cpuidle [ 0.314504] ACPI: processor limited to max C-state 1 [ 0.317411] [Firmware Bug]: Invalid critical threshold (0) [ 0.318987] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.318990] ACPI: Thermal Zone [THRM] (33 C) [ 0.319070] ERST: Table is not found! [ 0.319156] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.320230] Linux agpgart interface v0.103 [ 0.321373] brd: module loaded [ 0.321830] loop: module loaded [ 0.321907] i2c-core: driver [adp5520] using legacy suspend method [ 0.321909] i2c-core: driver [adp5520] using legacy resume method [ 0.322269] Fixed MDIO Bus: probed [ 0.322299] PPP generic driver version 2.4.2 [ 0.322334] tun: Universal TUN/TAP device driver, 1.6 [ 0.322335] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 0.322395] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.322448] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.322466] ehci_hcd 0000:00:12.2: setting latency timer to 64 [ 0.322470] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 0.322499] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 0.322511] ehci_hcd 0000:00:12.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.322514] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.322537] ehci_hcd 0000:00:12.2: debug port 1 [ 0.322558] ehci_hcd 0000:00:12.2: irq 17, io mem 0x90408600 [ 0.328414] isapnp: Scanning for PnP cards... [ 0.382628] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 0.382776] hub 1-0:1.0: USB hub found [ 0.382780] hub 1-0:1.0: 5 ports detected [ 0.382856] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.382873] ehci_hcd 0000:00:13.2: setting latency timer to 64 [ 0.382877] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 0.382913] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 0.382928] ehci_hcd 0000:00:13.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.382931] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.382952] ehci_hcd 0000:00:13.2: debug port 1 [ 0.382964] ehci_hcd 0000:00:13.2: irq 17, io mem 0x90408500 [ 0.392387] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 0.392544] hub 2-0:1.0: USB hub found [ 0.392548] hub 2-0:1.0: 5 ports detected [ 0.392626] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.392647] ehci_hcd 0000:00:16.2: setting latency timer to 64 [ 0.392650] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 0.392684] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 0.392694] ehci_hcd 0000:00:16.2: QUIRK: Enable exception for AMD Hudson ASPM [ 0.392698] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 0.392721] ehci_hcd 0000:00:16.2: debug port 1 [ 0.392735] ehci_hcd 0000:00:16.2: irq 17, io mem 0x90408400 [ 0.402918] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 0.402927] ACPI: Battery Slot [BAT0] (battery present) [ 0.404220] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 0.404354] hub 3-0:1.0: USB hub found [ 0.404357] hub 3-0:1.0: 4 ports detected [ 0.404427] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.404450] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.404473] ohci_hcd 0000:00:12.0: setting latency timer to 64 [ 0.404477] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 0.404512] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 0.404545] ohci_hcd 0000:00:12.0: irq 18, io mem 0x90407000 [ 0.564149] hub 4-0:1.0: USB hub found [ 0.564160] hub 4-0:1.0: 5 ports detected [ 0.564237] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.564259] ohci_hcd 0000:00:13.0: setting latency timer to 64 [ 0.564262] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 0.564298] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 0.564322] ohci_hcd 0000:00:13.0: irq 18, io mem 0x90406000 [ 0.719845] usb 1-3: new high speed USB device using ehci_hcd and address 2 [ 0.756238] hub 5-0:1.0: USB hub found [ 0.756281] hub 5-0:1.0: 5 ports detected [ 0.756357] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.756379] ohci_hcd 0000:00:14.5: setting latency timer to 64 [ 0.756383] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 0.756418] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 0.756442] ohci_hcd 0000:00:14.5: irq 18, io mem 0x90405000 [ 0.820265] hub 6-0:1.0: USB hub found [ 0.820308] hub 6-0:1.0: 2 ports detected [ 0.820378] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.820400] ohci_hcd 0000:00:16.0: setting latency timer to 64 [ 0.820404] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 0.820442] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 0.820468] ohci_hcd 0000:00:16.0: irq 18, io mem 0x90404000 [ 0.884395] hub 7-0:1.0: USB hub found [ 0.884407] hub 7-0:1.0: 4 ports detected [ 0.884477] uhci_hcd: USB Universal Host Controller Interface driver [ 0.884563] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.914772] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.914784] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.920437] mousedev: PS/2 mouse device common for all mice [ 0.920581] rtc_cmos 00:05: RTC can wake from S4 [ 0.920621] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.920648] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.920738] device-mapper: uevent: version 1.0.3 [ 0.920806] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com [ 0.966971] isapnp: No Plug & Play device found [ 0.966995] device-mapper: multipath: version 1.2.0 loaded [ 0.966997] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.967068] EISA: Probing bus 0 at eisa.0 [ 0.967070] EISA: Cannot allocate resource for mainboard [ 0.967072] Cannot allocate resource for EISA slot 1 [ 0.967074] Cannot allocate resource for EISA slot 2 [ 0.967075] Cannot allocate resource for EISA slot 3 [ 0.967077] Cannot allocate resource for EISA slot 4 [ 0.967078] Cannot allocate resource for EISA slot 5 [ 0.967080] Cannot allocate resource for EISA slot 6 [ 0.967081] Cannot allocate resource for EISA slot 7 [ 0.967083] Cannot allocate resource for EISA slot 8 [ 0.967085] EISA: Detected 0 cards. [ 0.968692] cpuidle: using governor ladder [ 0.968695] cpuidle: using governor menu [ 0.968926] TCP cubic registered [ 0.969044] NET: Registered protocol family 10 [ 0.969510] NET: Registered protocol family 17 [ 0.969529] Registering the dns_resolver key type [ 0.969549] powernow-k8: Found 1 AMD V140 Processor (1 cpu cores) (version 2.20.00) [ 0.969583] powernow-k8: 0 : pstate 0 (2300 MHz) [ 0.969585] powernow-k8: 1 : pstate 1 (1700 MHz) [ 0.969587] powernow-k8: 2 : pstate 2 (800 MHz) [ 0.969622] Using IPI No-Shortcut mode [ 0.969722] PM: Hibernation image not present or could not be loaded. [ 0.969731] registered taskstats version 1 [ 0.969961] Magic number: 11:645:290 [ 0.969998] tty tty23: hash matches [ 0.970059] rtc_cmos 00:05: setting system clock to 2011-09-28 17:16:03 UTC (1317230163) [ 0.970062] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.970063] EDD information not available. [ 0.979553] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.003595] Freeing initrd memory: 12552k freed [ 1.009156] Freeing unused kernel memory: 700k freed [ 1.009489] Write protecting the kernel text: 5192k [ 1.009518] Write protecting the kernel read-only data: 2148k [ 1.027650] <30>udev[61]: starting version 167 [ 1.147450] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.147476] r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.147509] r8169 0000:03:00.0: setting latency timer to 64 [ 1.147553] r8169 0000:03:00.0: irq 42 for MSI/MSI-X [ 1.147950] r8169 0000:03:00.0: eth0: RTL8102e at 0xf804e000, 98:4b:e1:9f:68:e7, XID 04e00000 IRQ 42 [ 1.233381] ahci 0000:00:11.0: version 3.0 [ 1.233404] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.233493] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.233497] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 1.233944] scsi0 : ahci [ 1.234078] scsi1 : ahci [ 1.234156] ata1: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408100 irq 19 [ 1.234159] ata2: SATA max UDMA/133 abar m1024@0x90408000 port 0x90408180 irq 19 [ 1.280052] Refined TSC clocksource calibration: 2294.254 MHz. [ 1.280059] Switching to clocksource tsc [ 1.404057] usb 2-1: new high speed USB device using ehci_hcd and address 2 [ 1.724094] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.724121] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.724351] ata1.00: ATA-7: INTEL SSDSA2M040G2GC, 2CV102M3, max UDMA/133 [ 1.724356] ata1.00: 78165360 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.724640] ata1.00: configured for UDMA/133 [ 1.724743] scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2M040 2CV1 PQ: 0 ANSI: 5 [ 1.724899] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.724966] sd 0:0:0:0: [sda] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB) [ 1.725015] sd 0:0:0:0: [sda] Write Protect is off [ 1.725018] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.725035] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.725572] sda: sda1 sda2 < sda5 > [ 1.725823] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.726159] ata2.00: ATAPI: hp CDDVDW TS-L633R, 0200, max UDMA/100 [ 1.728588] ata2.00: configured for UDMA/100 [ 1.731787] scsi 1:0:0:0: CD-ROM hp CDDVDW TS-L633R 0200 PQ: 0 ANSI: 5 [ 1.737195] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.737200] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.737325] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.737386] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.792442] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.864030] usb 5-2: new low speed USB device using ohci_hcd and address 2 [ 2.052601] Adding 1827836k swap on /dev/sda5. Priority:-1 extents:1 across:1827836k SS [ 2.080746] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 2.113705] <30>udev[309]: starting version 167 [ 2.157072] lp: driver loaded but no devices found [ 2.347651] type=1400 audit(1317230164.871:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=424 comm="apparmor_parser" [ 2.347996] type=1400 audit(1317230164.871:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=424 comm="apparmor_parser" [ 2.348395] type=1400 audit(1317230164.875:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=424 comm="apparmor_parser" [ 2.476568] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMBI [io 0xb00-0xb0f] [ 2.476572] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.580178] lib80211: common routines for IEEE802.11 drivers [ 2.580184] lib80211_crypt: registered algorithm 'NULL' [ 2.592164] r8169 0000:03:00.0: eth0: link down [ 2.593755] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2.629505] wl: module license 'MIXED/Proprietary' taints kernel. [ 2.629510] Disabling lock debugging due to kernel taint [ 2.649809] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 1022 ss_did 1235 [ 2.649815] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 2.650282] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.652335] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 2.652933] SP5100 TCO timer: mmio address 0xb8fe00 already in use [ 2.883834] input: Areson USB Device as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input4 [ 2.919043] generic-usb 0003:04B4:0060.0001: input,hidraw0: USB HID v1.00 Mouse [Areson USB Device] on usb-0000:00:13.0-2/input0 [ 2.925914] wl 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.925922] wl 0000:02:00.0: setting latency timer to 64 [ 2.935887] generic-usb 0003:04B4:0060.0002: hiddev0,hidraw1: USB HID v1.00 Device [Areson USB Device] on usb-0000:00:13.0-2/input1 [ 2.935921] usbcore: registered new interface driver usbhid [ 2.935923] usbhid: USB HID core driver [ 3.085527] lib80211_crypt: registered algorithm 'TKIP' [ 3.318277] type=1400 audit(1317230165.843:5): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=673 comm="apparmor_parser" [ 3.322129] type=1400 audit(1317230165.847:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=674 comm="apparmor_parser" [ 3.325141] type=1400 audit(1317230165.851:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=674 comm="apparmor_parser" [ 3.325370] type=1400 audit(1317230165.851:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=674 comm="apparmor_parser" [ 3.337861] type=1400 audit(1317230165.863:9): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=675 comm="apparmor_parser" [ 3.375148] type=1400 audit(1317230165.899:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=675 comm="apparmor_parser" [ 3.471117] eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.38 [ 3.563177] acpi device:04: registered as cooling_device1 [ 3.563461] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5 [ 3.564153] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.883356] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) [ 3.883365] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f4431360), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.883375] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f4431480), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.883410] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) [ 3.883415] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f4431360), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.883422] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f4431480), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.884418] input: HP WMI hotkeys as /devices/virtual/input/input6 [ 3.889488] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) [ 3.889496] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWMC] (Node f4431360), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.889506] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node f4431480), AE_AML_BUFFER_LIMIT (20110112/psparse-536) [ 3.889517] hp-wmi: probe of hp-wmi failed with error -22 [ 3.992424] Synaptics Touchpad, model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd04773/0xe40000/0xa0400 [ 4.090335] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 4.141101] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 4.159041] [fglrx] Maximum main memory to use for locked dma buffers: 1639 MBytes. [ 4.159087] [fglrx] vendor: 1002 device: 9712 count: 1 [ 4.159334] [fglrx] ioport: bar 1, base 0x3000, size: 0x100 [ 4.159348] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.159353] pci 0000:01:05.0: setting latency timer to 64 [ 4.159596] [fglrx] Kernel PAT support is enabled [ 4.159619] [fglrx] module loaded - fglrx 8.84.60 [Mar 24 2011] with 1 minors [ 4.194283] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.194332] HDA Intel 0000:00:14.2: setting latency timer to 64 [ 4.230843] hda-intel: Enable sync_write for AMD chipset [ 4.256684] hda_codec: ALC270: BIOS auto-probing. [ 4.264502] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 4.264671] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 4.335186] vesafb: framebuffer at 0x80000000, mapped to 0xf9380000, using 4160k, total 4160k [ 4.335190] vesafb: mode is 1366x768x32, linelength=5504, pages=0 [ 4.335193] vesafb: scrolling: redraw [ 4.335196] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 4.335358] Console: switching to colour frame buffer device 170x48 [ 4.335389] fb0: VESA VGA frame buffer device [ 4.354142] ppdev: user-space parallel port driver [ 4.515197] [fglrx] ATIF platform detected with notification ID: 0x81 [ 4.567767] [fglrx] GART Table is not in FRAME_BUFFER range [ 4.567945] [fglrx] Could not enable MSI; System prevented initialization [ 4.568797] [fglrx] Firegl kernel thread PID: 1099 [ 4.568838] [fglrx] Firegl kernel thread PID: 1100 [ 4.568878] [fglrx] Firegl kernel thread PID: 1101 [ 4.569170] [fglrx] IRQ 18 Enabled [ 4.793114] [fglrx] Gart USWC size:548 M. [ 4.793118] [fglrx] Gart cacheable size:215 M. [ 4.793123] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 4.793126] [fglrx] Reserved FB block: Unshared offset:fffb000, size:5000 [ 7.749574] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0 [ 14.432039] eth1: no IPv6 routers present [ 841.986067] exe (1677): /proc/1677/oom_adj is deprecated, please use /proc/1677/oom_score_adj instead.

από **xaris2335** » 28 Σεπ 2011, 22:05

mythtv

Δεν βλέπει την καρτα τηλεόρασης

Δεν βλέπει την καρτα τηλεόρασης

Re: Δεν βλέπει την καρτα τηλεόρασης

Re: Δεν βλέπει την καρτα τηλεόρασης

Re: Δεν βλέπει την καρτα τηλεόρασης

Re: Δεν βλέπει την καρτα τηλεόρασης

Re: Δεν βλέπει την καρτα τηλεόρασης

Re: Δεν βλέπει την καρτα τηλεόρασης

Re: Δεν βλέπει την καρτα τηλεόρασης

Re: Δεν βλέπει την καρτα τηλεόρασης