usb flash memory "corcair"  Το θέμα επιλύθηκε

...hardware-drivers για περιφερειακά (εκτυπωτές, κάμερες, εξ. σκληροί, κλπ)
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb

usb flash memory "corcair"

Δημοσίευσηαπό gfevran » 21 Απρ 2012, 11:56

Γεια σας παιδιά,
Αγόρασα ένα usb memory voyager mini της "corcair"
Ενώ στο σταθερό της υπογραφής μου αναγνωρίζεται
και στα Win και στο ubuntu,
στο laptop επίσης της υπογραφής μου δεν αναγνωρίζετα
οι θύρες usb δουλεύουν κανονικά όλες!
κατέβασα το τελευταίο bios, δεν έγινε τίποτα!
Ευχαριστώ εκ των προτέρων για όποια βοήθεια.
Τελευταία επεξεργασία από gfevran και 21 Απρ 2012, 12:39, έχει επεξεργασθεί 1 φορά/ες συνολικά
Γνώσεις ⇛ Linux: Όσο ζω μαθαίνω ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Η/Υ :
Desktop:
Dell Optiplex 380 (Ubuntu14.04 32Bit) Προδιαγραφές ⇛ Intel Dual-Core E6300 @2.80GHz
4GB RAM│Ati Radeon 4350│HD Audio │Eizo TFT 20"
Laptop:
HP Probook 6570b (Ubuntu 14.04 64Bit) Προδιαγραφές ⇛ Core I5 3210M 2.5GHz
4 GB RAM │Intel HD Graphics 4000 | 500 GB HD Sata ||
Intel(R) 82579V Gigabit Network Ethernet
Broadcom BCM943228HM4L 802.11a/b/g/n 2x2 WiFi Adapter
Άβαταρ μέλους
gfevran
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 361
Εγγραφή: 12 Ιαν 2011, 21:08
Τοποθεσία: Κορυδαλλός
Εκτύπωση

Re: usb flash memory "corcair"

Δημοσίευσηαπό Learner » 21 Απρ 2012, 12:27

Έτσι όπως τα περιγράφεις , φαίνεται να έχει πρόβλημα η θύρα usb. Άλλα usb αναγνωρίζει το laptop σου ?
Επίσης μόλις συνδέσεις το usb άνοιξε ένα τερματικό και γράψε
Κώδικας: Επιλογή όλων
dmesg

copy-paste το αποτέλεσμα εδώ .
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: usb flash memory "corcair"

Δημοσίευσηαπό gfevran » 21 Απρ 2012, 12:49

Έχεις δίκιο Learner για τη περιγραφή τη διόρθωσα!
το αποτέλεσμα
Κώδικας: Επιλογή όλων
[ 0.372896] pci 0000:00:1c.2: setting latency timer to 64
[ 0.372907] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.372912] pci 0000:00:1c.3: setting latency timer to 64
[ 0.372922] pci 0000:00:1e.0: setting latency timer to 64
[ 0.372931] pci 0000:0c:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.372938] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.372941] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.372943] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.372946] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.372948] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.372951] pci_bus 0000:00: resource 9 [mem 0x80000000-0xdfffffff]
[ 0.372954] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff]
[ 0.372957] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.372959] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf40fffff]
[ 0.372962] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.372965] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.372967] pci_bus 0000:02: resource 1 [mem 0xf0000000-0xf3ffffff]
[ 0.372970] pci_bus 0000:02: resource 2 [mem 0xf6000000-0xf7ffffff 64bit pref]
[ 0.372973] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.372975] pci_bus 0000:04: resource 1 [mem 0xf4100000-0xf41fffff]
[ 0.372978] pci_bus 0000:04: resource 2 [mem 0x84000000-0x840fffff pref]
[ 0.372981] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
[ 0.372983] pci_bus 0000:05: resource 1 [mem 0xf4300000-0xf43fffff]
[ 0.372986] pci_bus 0000:05: resource 2 [mem 0x84600000-0x847fffff 64bit pref]
[ 0.372989] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff]
[ 0.372991] pci_bus 0000:06: resource 1 [mem 0x84200000-0x843fffff]
[ 0.372994] pci_bus 0000:06: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
[ 0.372997] pci_bus 0000:0c: resource 0 [io 0x5000-0x5fff]
[ 0.372999] pci_bus 0000:0c: resource 1 [mem 0xf4200000-0xf42fffff]
[ 0.373002] pci_bus 0000:0c: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.373004] pci_bus 0000:0c: resource 4 [io 0x0000-0x0cf7]
[ 0.373007] pci_bus 0000:0c: resource 5 [io 0x0d00-0xffff]
[ 0.373009] pci_bus 0000:0c: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.373012] pci_bus 0000:0c: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.373014] pci_bus 0000:0c: resource 8 [mem 0x000d8000-0x000dbfff]
[ 0.373017] pci_bus 0000:0c: resource 9 [mem 0x80000000-0xdfffffff]
[ 0.373020] pci_bus 0000:0c: resource 10 [mem 0xf0000000-0xfebfffff]
[ 0.373022] pci_bus 0000:0d: resource 0 [io 0x5000-0x50ff]
[ 0.373025] pci_bus 0000:0d: resource 1 [io 0x5400-0x54ff]
[ 0.373027] pci_bus 0000:0d: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.373030] pci_bus 0000:0d: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.373076] NET: Registered protocol family 2
[ 0.373151] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.373408] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.373879] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.374097] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.374099] TCP reno registered
[ 0.374102] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.374116] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.374207] NET: Registered protocol family 1
[ 0.374388] pci 0000:01:00.0: Boot video device
[ 0.374436] PCI: CLS 64 bytes, default 64
[ 0.374443] Simple Boot Flag at 0x36 set to 0x1
[ 0.374775] audit: initializing netlink socket (disabled)
[ 0.374787] type=2000 audit(1335012095.368:1): initialized
[ 0.398975] highmem bounce pool size: 64 pages
[ 0.398981] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.407686] VFS: Disk quotas dquot_6.5.2
[ 0.407759] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.408497] fuse init (API version 7.16)
[ 0.408593] msgmni has been set to 1680
[ 0.408917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.408944] io scheduler noop registered
[ 0.408946] io scheduler deadline registered
[ 0.408960] io scheduler cfq registered (default)
[ 0.409092] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.409131] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.409184] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.409241] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.409323] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.409380] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.409461] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.409518] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.409600] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.409657] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.409760] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.409784] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.409838] intel_idle: MWAIT substates: 0x22220
[ 0.409840] intel_idle: does not run on family 6 model 15
[ 0.409915] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.409971] ACPI: AC Adapter [ACAD] (off-line)
[ 0.410031] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.410048] ACPI: Lid Switch [LID0]
[ 0.410090] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.410095] ACPI: Power Button [PWRB]
[ 0.410149] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.410153] ACPI: Power Button [PWRF]
[ 0.410186] ACPI: acpi_idle registered with cpuidle
[ 0.412448] Monitor-Mwait will be used to enter C-1 state
[ 0.412477] Monitor-Mwait will be used to enter C-2 state
[ 0.412502] Monitor-Mwait will be used to enter C-3 state
[ 0.412507] Marking TSC unstable due to TSC halts in idle
[ 0.452119] Freeing initrd memory: 13328k freed
[ 0.464298] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.464326] ERST: Table is not found!
[ 0.464480] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.464628] isapnp: Scanning for PnP cards...
[ 0.688164] ACPI: Battery Slot [BAT1] (battery present)
[ 0.818608] isapnp: No Plug & Play device found
[ 0.833018] Linux agpgart interface v0.103
[ 0.834486] brd: module loaded
[ 0.835091] loop: module loaded
[ 0.835236] ata_piix 0000:00:1f.1: version 2.13
[ 0.835250] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.835297] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.835609] scsi0 : ata_piix
[ 0.835707] scsi1 : ata_piix
[ 0.836125] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 0.836129] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 0.836505] Fixed MDIO Bus: probed
[ 0.836532] PPP generic driver version 2.4.2
[ 0.836570] tun: Universal TUN/TAP device driver, 1.6
[ 0.836572] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.836653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.836669] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.836681] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.836685] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.836719] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.836754] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.840631] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.840648] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4604800
[ 0.856018] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.856140] hub 1-0:1.0: USB hub found
[ 0.856145] hub 1-0:1.0: 4 ports detected
[ 0.856230] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.856241] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.856245] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.856279] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.856309] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.860192] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.860207] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4604c00
[ 0.876018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.876137] hub 2-0:1.0: USB hub found
[ 0.876141] hub 2-0:1.0: 6 ports detected
[ 0.876222] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.876236] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.876257] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.876264] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.876268] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.876307] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.876347] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 0.876474] hub 3-0:1.0: USB hub found
[ 0.876478] hub 3-0:1.0: 2 ports detected
[ 0.876555] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.876561] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.876565] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.876601] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.876642] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 0.876762] hub 4-0:1.0: USB hub found
[ 0.876766] hub 4-0:1.0: 2 ports detected
[ 0.876835] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.876843] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.876847] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.876880] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.876908] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 0.877027] hub 5-0:1.0: USB hub found
[ 0.877031] hub 5-0:1.0: 2 ports detected
[ 0.877103] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.877110] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.877113] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.877146] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.877184] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 0.877309] hub 6-0:1.0: USB hub found
[ 0.877313] hub 6-0:1.0: 2 ports detected
[ 0.877381] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.877388] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.877392] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.877432] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.877460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 0.877580] hub 7-0:1.0: USB hub found
[ 0.877584] hub 7-0:1.0: 2 ports detected
[ 0.877709] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.904089] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.904095] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.904204] mousedev: PS/2 mouse device common for all mice
[ 0.906227] rtc_cmos 00:07: RTC can wake from S4
[ 0.906345] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.906377] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.906464] device-mapper: uevent: version 1.0.3
[ 0.906539] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 0.906570] EISA: Probing bus 0 at eisa.0
[ 0.906573] EISA: Cannot allocate resource for mainboard
[ 0.906575] Cannot allocate resource for EISA slot 1
[ 0.906577] Cannot allocate resource for EISA slot 2
[ 0.906579] Cannot allocate resource for EISA slot 3
[ 0.906581] Cannot allocate resource for EISA slot 4
[ 0.906583] Cannot allocate resource for EISA slot 5
[ 0.906585] Cannot allocate resource for EISA slot 6
[ 0.906587] Cannot allocate resource for EISA slot 7
[ 0.906588] Cannot allocate resource for EISA slot 8
[ 0.906590] EISA: Detected 0 cards.
[ 0.906601] cpufreq-nforce2: No nForce2 chipset.
[ 0.906664] cpuidle: using governor ladder
[ 0.906764] cpuidle: using governor menu
[ 0.906766] EFI Variables Facility v0.08 2004-May-17
[ 0.907068] TCP cubic registered
[ 0.907210] NET: Registered protocol family 10
[ 0.907815] NET: Registered protocol family 17
[ 0.907830] Registering the dns_resolver key type
[ 0.907855] Using IPI No-Shortcut mode
[ 0.907936] PM: Hibernation image not present or could not be loaded.
[ 0.907948] registered taskstats version 1
[ 0.918963] Magic number: 8:968:683
[ 0.919066] rtc_cmos 00:07: setting system clock to 2012-04-21 12:41:36 UTC (1335012096)
[ 0.919575] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.919577] EDD information not available.
[ 0.927312] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.005060] ata1.00: ATAPI: TOSHIBA DVDW/HD TS-L802A, TO35, max UDMA/33
[ 1.037063] ata1.00: configured for UDMA/33
[ 1.052594] scsi 0:0:0:0: CD-ROM TOSHIBA DVDW/HD TS-L802A TO35 PQ: 0 ANSI: 5
[ 1.072060] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.072065] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.072257] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.072349] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.072487] Freeing unused kernel memory: 696k freed
[ 1.072733] Write protecting the kernel text: 5344k
[ 1.072795] Write protecting the kernel read-only data: 2192k
[ 1.089360] udevd[90]: starting version 173
[ 1.154433] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.154456] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.154509] r8169 0000:04:00.0: setting latency timer to 64
[ 1.154605] r8169 0000:04:00.0: irq 45 for MSI/MSI-X
[ 1.155207] r8169 0000:04:00.0: eth0: RTL8101e at 0xf8000000, 00:1b:38:ac:ac:ae, XID 94200000 IRQ 45
[ 1.172039] usb 1-3: new high speed USB device number 2 using ehci_hcd
[ 1.189696] sdhci: Secure Digital Host Controller Interface driver
[ 1.189700] sdhci: Copyright(c) Pierre Ossman
[ 1.189924] sdhci-pci 0000:0c:04.3: SDHCI controller found [104c:803c] (rev 0)
[ 1.189942] sdhci-pci 0000:0c:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.189982] mmc0: no vmmc regulator found
[ 1.190014] Registered led device: mmc0::
[ 1.190052] mmc0: SDHCI controller on PCI [0000:0c:04.3] using DMA
[ 1.190491] firewire_ohci 0000:0c:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.194635] ahci 0000:00:1f.2: version 3.0
[ 1.194650] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.194703] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[ 1.194770] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.194774] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 1.194780] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.198998] scsi2 : ahci
[ 1.201099] scsi3 : ahci
[ 1.202999] scsi4 : ahci
[ 1.203155] ata3: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604100 irq 46
[ 1.203159] ata4: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604180 irq 46
[ 1.203163] ata5: SATA max UDMA/133 abar m2048@0xf4604000 port 0xf4604200 irq 46
[ 1.244192] firewire_ohci: Added fw-ohci device 0000:0c:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.520123] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.520156] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.520200] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.521103] ata3.00: unexpected _GTF length (8)
[ 1.521354] ata3.00: ATA-8: WDC WD3200BEKT-22KA9T0, 01.01A01, max UDMA/133
[ 1.521360] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.522337] ata3.00: unexpected _GTF length (8)
[ 1.522585] ata3.00: configured for UDMA/133
[ 1.522817] scsi 2:0:0:0: Direct-Access ATA WDC WD3200BEKT-2 01.0 PQ: 0 ANSI: 5
[ 1.523071] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.523140] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.523233] sd 2:0:0:0: [sda] Write Protect is off
[ 1.523237] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.523257] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.601581] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 1.602064] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.632057] usb 6-2: new low speed USB device number 2 using uhci_hcd
[ 1.744181] firewire_core: created device fw0: GUID 00023f7bae4064b3, S400
[ 1.786254] usb 6-2: config 1 has an invalid interface number: 1 but max is 0
[ 1.786260] usb 6-2: config 1 has no interface number 0
[ 1.837353] input: SilverCrest OMC807 as /devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input4
[ 1.837571] generic-usb 0003:1BCF:053A.0001: input,hiddev0,hidraw0: USB HID v1.00 Mouse [SilverCrest OMC807] on usb-0000:00:1d.1-2/input1
[ 1.837588] usbcore: registered new interface driver usbhid
[ 1.837590] usbhid: USB HID core driver
[ 2.213820] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 10.544420] udevd[333]: starting version 173
[ 10.552554] lp: driver loaded but no devices found
[ 10.600156] Adding 3124220k swap on /dev/sda5. Priority:-1 extents:1 across:3124220k
[ 10.660113] toshiba_bluetooth: Detected Toshiba ACPI Bluetooth device - installing RFKill handler
[ 10.760120] acpi device:04: registered as cooling_device2
[ 10.776171] toshiba_bluetooth: Re-enabling Toshiba Bluetooth
[ 10.776574] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input5
[ 10.776637] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 10.832558] cfg80211: Calling CRDA to update world regulatory domain
[ 10.836531] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 10.836535] Disabling lock debugging due to kernel taint
[ 10.878603] type=1400 audit(1335001306.453:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=546 comm="apparmor_parser"
[ 10.879008] type=1400 audit(1335001306.453:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=546 comm="apparmor_parser"
[ 10.879260] type=1400 audit(1335001306.453:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=546 comm="apparmor_parser"
[ 10.906338] yenta_cardbus 0000:0c:04.0: CardBus bridge found [1179:ff00]
[ 10.906360] yenta_cardbus 0000:0c:04.0: Enabling burst memory read transactions
[ 10.906366] yenta_cardbus 0000:0c:04.0: Using CSCINT to route CSC interrupts to PCI
[ 10.906369] yenta_cardbus 0000:0c:04.0: Routing CardBus interrupts to PCI
[ 10.906375] yenta_cardbus 0000:0c:04.0: TI: mfunc 0x10a01b22, devctl 0x64
[ 11.003086] iwl4965: Intel(R) Wireless WiFi 4965 driver for Linux, in-tree:
[ 11.003090] iwl4965: Copyright(c) 2003-2011 Intel Corporation
[ 11.003191] iwl4965 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.003224] iwl4965 0000:05:00.0: setting latency timer to 64
[ 11.003323] iwl4965 0000:05:00.0: Detected Intel(R) Wireless WiFi Link 4965AGN, REV=0x4
[ 11.012303] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 11.022530] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 11.022606] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 11.022647] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.046197] iwl4965 0000:05:00.0: device EEPROM VER=0x36, CALIB=0x5
[ 11.056213] iwl4965 0000:05:00.0: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 11.056373] iwl4965 0000:05:00.0: irq 48 for MSI/MSI-X
[ 11.120165] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes.
[ 11.121165] [fglrx] vendor: 1002 device: 9581 count: 1
[ 11.123040] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 11.123055] pci 0000:01:00.0: power state changed by ACPI to D0
[ 11.123060] pci 0000:01:00.0: power state changed by ACPI to D0
[ 11.123071] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.123078] pci 0000:01:00.0: setting latency timer to 64
[ 11.123439] [fglrx] Kernel PAT support is enabled
[ 11.123462] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[ 11.138333] yenta_cardbus 0000:0c:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 11.138339] yenta_cardbus 0000:0c:04.0: Socket status: 30000006
[ 11.138344] pci_bus 0000:0c: Raising subordinate bus# of parent bus (#0c) from #0d to #10
[ 11.138353] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff]
[ 11.138357] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff
[ 11.147017] hda_codec: ALC268: BIOS auto-probing.
[ 11.151175]
[ 11.151180] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge window: [mem 0xf4200000-0xf42fffff]
[ 11.151184] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4200000-0xf42fffff: excluding 0xf4200000-0xf420ffff
[ 11.168484] yenta_cardbus 0000:0c:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 11.168488] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[ 11.193080] tifm_7xx1 0000:0c:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.234345] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 11.240370] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 11.240550] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 11.240640] HDA Intel 0000:01:00.1: irq 49 for MSI/MSI-X
[ 11.240672] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 11.245359] cfg80211: World regulatory domain updated:
[ 11.245362] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 11.245366] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.245369] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.245371] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 11.245374] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.245377] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 11.261514] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 11.261866] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 11.267714] iwl4965 0000:05:00.0: loaded firmware version 228.61.2.24
[ 11.267912] Registered led device: phy0-led
[ 11.267940] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 11.268797] Linux video capture interface: v2.00
[ 11.269791] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008)
[ 11.275218] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input8
[ 11.275421] usbcore: registered new interface driver uvcvideo
[ 11.275423] USB Video Class driver (v1.1.0)
[ 11.280066] ieee80211 phy0: Selected rate control algorithm 'iwl-4965-rs'
[ 11.283195] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 11.286237] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 11.287142] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 11.288549] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 11.289378] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 11.289442] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 11.289505] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 11.289561] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 11.553346] usb 3-2: new full speed USB device number 2 using uhci_hcd
[ 11.744201] Bluetooth: Core ver 2.16
[ 11.744254] NET: Registered protocol family 31
[ 11.744256] Bluetooth: HCI device and connection manager initialized
[ 11.744258] Bluetooth: HCI socket layer initialized
[ 11.744260] Bluetooth: L2CAP socket layer initialized
[ 11.744297] Bluetooth: SCO socket layer initialized
[ 11.744571] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 11.744720] usbcore: registered new interface driver btusb
[ 11.914983] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000/0x0
[ 11.914991] synaptics: Toshiba Satellite P200 detected, limiting rate to 40pps.
[ 12.003285] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 12.629714] vesafb: mode is 1152x864x32, linelength=4608, pages=0
[ 12.629717] vesafb: scrolling: redraw
[ 12.629720] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 12.631124] vesafb: framebuffer at 0xd0000000, mapped to 0xf9e00000, using 3904k, total 3904k
[ 12.632403] Console: switching to colour frame buffer device 144x54
[ 12.632432] fb0: VESA VGA frame buffer device
[ 12.649861] type=1400 audit(1335001308.225:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=910 comm="apparmor_parser"
[ 12.651274] ppdev: user-space parallel port driver
[ 12.663680] type=1400 audit(1335001308.237:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=923 comm="apparmor_parser"
[ 12.669205] type=1400 audit(1335001308.245:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=911 comm="apparmor_parser"
[ 12.669749] type=1400 audit(1335001308.245:8): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=923 comm="apparmor_parser"
[ 12.670823] type=1400 audit(1335001308.245:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=911 comm="apparmor_parser"
[ 12.671079] type=1400 audit(1335001308.245:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=911 comm="apparmor_parser"
[ 12.686786] type=1400 audit(1335001308.261:11): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=924 comm="apparmor_parser"
[ 12.858461] r8169 0000:04:00.0: eth0: link down
[ 12.858877] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.944263] init: failsafe main process (846) killed by TERM signal
[ 12.945977] init: apport pre-start process (987) terminated with status 1
[ 12.968896] init: apport post-stop process (1025) terminated with status 1
[ 13.110626] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 13.258888] Bluetooth: RFCOMM TTY layer initialized
[ 13.258894] Bluetooth: RFCOMM socket layer initialized
[ 13.258895] Bluetooth: RFCOMM ver 1.11
[ 13.288859] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.288863] Bluetooth: BNEP filters: protocol multicast
[ 13.355590] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[ 13.356319] [fglrx] Firegl kernel thread PID: 1161
[ 13.356428] [fglrx] Firegl kernel thread PID: 1162
[ 13.356520] [fglrx] Firegl kernel thread PID: 1163
[ 13.356685] [fglrx] IRQ 50 Enabled
[ 13.850252] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=600
[ 13.853508] EXT4-fs (sda6): re-mounted. Opts: commit=600
[ 13.925528] [fglrx] Gart USWC size:628 M.
[ 13.925531] [fglrx] Gart cacheable size:247 M.
[ 13.925536] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 13.925539] [fglrx] Reserved FB block: Unshared offset:fe03000, size:1f9000
[ 13.925542] [fglrx] Reserved FB block: Unshared offset:fffc000, size:4000
[ 15.543221] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro,commit=600
[ 15.725277] EXT4-fs (sda6): re-mounted. Opts: commit=600
[ 19.157843] wlan0: authenticate with 00:1c:a2:b4:b7:31 (try 1)
[ 19.161735] wlan0: authenticated
[ 19.180625] wlan0: associate with 00:1c:a2:b4:b7:31 (try 1)
[ 19.183228] wlan0: RX AssocResp from 00:1c:a2:b4:b7:31 (capab=0x471 status=0 aid=1)
[ 19.183234] wlan0: associated
[ 19.210418] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 29.520117] wlan0: no IPv6 routers present
gfevran@Satellite-P200:~$
Γνώσεις ⇛ Linux: Όσο ζω μαθαίνω ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Η/Υ :
Desktop:
Dell Optiplex 380 (Ubuntu14.04 32Bit) Προδιαγραφές ⇛ Intel Dual-Core E6300 @2.80GHz
4GB RAM│Ati Radeon 4350│HD Audio │Eizo TFT 20"
Laptop:
HP Probook 6570b (Ubuntu 14.04 64Bit) Προδιαγραφές ⇛ Core I5 3210M 2.5GHz
4 GB RAM │Intel HD Graphics 4000 | 500 GB HD Sata ||
Intel(R) 82579V Gigabit Network Ethernet
Broadcom BCM943228HM4L 802.11a/b/g/n 2x2 WiFi Adapter
Άβαταρ μέλους
gfevran
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 361
Εγγραφή: 12 Ιαν 2011, 21:08
Τοποθεσία: Κορυδαλλός
Εκτύπωση

Re: usb flash memory "corcair"  Το θέμα επιλύθηκε

Δημοσίευσηαπό gfevran » 21 Απρ 2012, 15:26

Ωχ... sory!
Όπως προανέφερα το stick είναι mini
και μπαίνει και από τις δύο πλευρές,
το έβαζα ανάποδα
o.k. λειτουργεί κανονικά!
Γνώσεις ⇛ Linux: Όσο ζω μαθαίνω ┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Η/Υ :
Desktop:
Dell Optiplex 380 (Ubuntu14.04 32Bit) Προδιαγραφές ⇛ Intel Dual-Core E6300 @2.80GHz
4GB RAM│Ati Radeon 4350│HD Audio │Eizo TFT 20"
Laptop:
HP Probook 6570b (Ubuntu 14.04 64Bit) Προδιαγραφές ⇛ Core I5 3210M 2.5GHz
4 GB RAM │Intel HD Graphics 4000 | 500 GB HD Sata ||
Intel(R) 82579V Gigabit Network Ethernet
Broadcom BCM943228HM4L 802.11a/b/g/n 2x2 WiFi Adapter
Άβαταρ μέλους
gfevran
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 361
Εγγραφή: 12 Ιαν 2011, 21:08
Τοποθεσία: Κορυδαλλός
Εκτύπωση


Επιστροφή στο Περιφερειακά