wacom bamboo pen ctl470 ΕΓΚΑΤΆΣΑΣΗ DRIVERS?

[the_eye]

Για τρέξε στο τερματικό

Κώδικας: Επιλογή όλων

sudo add-apt-repository ppa:lekensteyn/wacom-tablet
sudo apt-get update
sudo apt-get install wacom-dkms

μετά κάνε επανεκκίνηση

[digestived]

αλήθεια δεν καταλαβαίνω τίποτα....και χθες όλο το βράδυ που ασχολήθικα...κάτι απλο??βοήθεια πραγματικά!

[digestived]

αποτέλεσμα :
niki@niki-Aspire-5670:~$ sudo add-apt-repository ppa:lekensteyn/wacom-tablet
You are about to add the following PPA to your system:
Wacom Tablet Drivers
Updated drivers for the Wacom Tablet. See also http://ubuntuforums.org/showthread.php?t=1515562
More info: https://launchpad.net/~lekensteyn/+archive/wacom-tablet
Press [ENTER] to continue or ctrl-c to cancel adding it

Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.es4A80HfFf --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 0C7FD6F63D3CEC5D267D35D4C61D0A8D291D760B
gpg: requesting key 291D760B from hkp server keyserver.ubuntu.com
gpg: key 291D760B: public key "Launchpad PPA for Lekensteyn" imported
gpg: Total number processed: 1
gpg: imported: 1 (RSA: 1)
niki@niki-Aspire-5670:~$

[digestived]

και επανεκκίνηση που έκανα τίποτα...

[clepto]

εδωσες τι αλλες 2 εντολες μετα;

Κώδικας: Επιλογή όλων

sudo apt-get update
sudo apt-get install wacom-dkms

[vasster]

Μια ταμπλέτα (μοντέλο CTH460) που δοκίμασα, έπαιξε αμέσως σε 11.10 64b χωρίς κανένα πρόβλημα και χωρίς κάποιον ειδικό οδηγό. Δες από το dmesg τo log

Κώδικας: Επιλογή όλων


[ 4178.816021] usb 6-1: new full speed USB device number 2 using ohci_hcd
[ 4179.275119] input: Wacom Bamboo 2FG 4x5 Pen as /devices/pci0000:00/0000:00:13.4/usb6/6-1/6-1:1.0/input/input4
[ 4179.302119] input: Wacom Bamboo 2FG 4x5 Finger as /devices/pci0000:00/0000:00:13.4/usb6/6-1/6-1:1.1/input/input5
[ 4179.314079] usbcore: registered new interface driver wacom
[ 4179.314082] wacom: v1.52:USB Wacom tablet driver
[ 4217.308248] usb 6-1: USB disconnect, device number 2


[digestived]

λοιπον, κατεβασα ένα αρχείο που μάλλον είναι οι ντραιβερσ αλλα δεν ξερω πωσ να το ανοίξω..
το ονομα είναι:
wacom-bamboo.tar.gz
οταν το ανοιγω εχει κάτι σαν αρχεια κειμενου μέσα...καμια ιδέα?

[digestived]

έδωσα την εντολή dmesg και είχα τα ακόλουθα:

Κώδικας: Επιλογή όλων

]
[ 0.982920] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
[ 0.982923] pci_bus 0000:02: resource 1 [mem 0x44a00000-0x44bfffff]
[ 0.982927] pci_bus 0000:02: resource 2 [mem 0x44c00000-0x44dfffff 64bit pref]
[ 0.982931] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.982935] pci_bus 0000:03: resource 1 [mem 0x44000000-0x440fffff]
[ 0.982939] pci_bus 0000:03: resource 2 [mem 0x44800000-0x449fffff 64bit pref]
[ 0.982943] pci_bus 0000:04: resource 0 [io 0x5000-0x5fff]
[ 0.982946] pci_bus 0000:04: resource 1 [mem 0x44100000-0x441fffff]
[ 0.982950] pci_bus 0000:04: resource 2 [mem 0x44600000-0x447fffff 64bit pref]
[ 0.982954] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.982957] pci_bus 0000:05: resource 1 [mem 0x44200000-0x443fffff]
[ 0.982961] pci_bus 0000:05: resource 2 [mem 0x44400000-0x445fffff 64bit pref]
[ 0.982965] pci_bus 0000:0a: resource 0 [io 0x3000-0x3fff]
[ 0.982969] pci_bus 0000:0a: resource 1 [mem 0xc8400000-0xc84fffff]
[ 0.982973] pci_bus 0000:0a: resource 2 [mem 0x40000000-0x43ffffff pref]
[ 0.982976] pci_bus 0000:0a: resource 4 [io 0x0000-0xffff]
[ 0.982980] pci_bus 0000:0a: resource 5 [mem 0x00000000-0xffffffff]
[ 0.982984] pci_bus 0000:0b: resource 0 [io 0x3000-0x30ff]
[ 0.982987] pci_bus 0000:0b: resource 1 [io 0x3400-0x34ff]
[ 0.982991] pci_bus 0000:0b: resource 2 [mem 0x40000000-0x43ffffff pref]
[ 0.982995] pci_bus 0000:0b: resource 3 [mem 0x48000000-0x4bffffff]
[ 0.983047] NET: Registered protocol family 2
[ 0.983141] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.983465] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.984239] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.984613] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.984617] TCP reno registered
[ 0.984621] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.984635] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.984769] NET: Registered protocol family 1
[ 0.984927] pci 0000:01:00.0: Boot video device
[ 0.984954] PCI: CLS 64 bytes, default 64
[ 0.984962] Simple Boot Flag at 0x3e set to 0x1
[ 0.985404] audit: initializing netlink socket (disabled)
[ 0.985416] type=2000 audit(1324239293.980:1): initialized
[ 1.016071] highmem bounce pool size: 64 pages
[ 1.016079] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.022977] VFS: Disk quotas dquot_6.5.2
[ 1.023082] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.024092] fuse init (API version 7.16)
[ 1.024228] msgmni has been set to 1730
[ 1.024783] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.024827] io scheduler noop registered
[ 1.024831] io scheduler deadline registered
[ 1.024852] io scheduler cfq registered (default)
[ 1.025014] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.025058] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.025122] pcieport 0000:00:1c.0: setting latency timer to 64
[ 1.025180] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.025270] pcieport 0000:00:1c.1: setting latency timer to 64
[ 1.025329] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 1.025417] pcieport 0000:00:1c.2: setting latency timer to 64
[ 1.025475] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 1.025564] pcieport 0000:00:1c.3: setting latency timer to 64
[ 1.025623] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 1.025742] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.025777] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.025852] intel_idle: MWAIT substates: 0x22220
[ 1.025855] intel_idle: does not run on family 6 model 14
[ 1.044060] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.060067] ACPI: AC Adapter [ACAD] (on-line)
[ 1.060207] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.060250] ACPI: Lid Switch [LID]
[ 1.060310] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.060317] ACPI: Power Button [PWRB]
[ 1.060377] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.060382] ACPI: Sleep Button [SLPB]
[ 1.060441] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.060446] ACPI: Power Button [PWRF]
[ 1.060484] ACPI: acpi_idle registered with cpuidle
[ 1.060806] Marking TSC unstable due to TSC halts in idle
[ 1.124051] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.124055] ACPI: Thermal Zone [THRM] (59 C)
[ 1.124087] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.124109] ERST: Table is not found!
[ 1.124128] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.124163] isapnp: Scanning for PnP cards...
[ 1.124200] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.196568] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.478157] isapnp: No Plug & Play device found
[ 1.482103] Linux agpgart interface v0.103
[ 1.484081] brd: module loaded
[ 1.484918] loop: module loaded
[ 1.485083] ata_piix 0000:00:1f.2: version 2.13
[ 1.485099] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.485107] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.640033] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.640439] scsi0 : ata_piix
[ 1.640563] scsi1 : ata_piix
[ 1.640937] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 1.640941] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 1.641435] Fixed MDIO Bus: probed
[ 1.641470] PPP generic driver version 2.4.2
[ 1.641522] tun: Universal TUN/TAP device driver, 1.6
[ 1.641524] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.641630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.641667] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.641681] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.641686] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.641741] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.641767] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.641781] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.645660] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.645682] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xc8004000
[ 1.660019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.660179] hub 1-0:1.0: USB hub found
[ 1.660185] hub 1-0:1.0: 8 ports detected
[ 1.660295] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.660314] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.660341] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.660350] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.660354] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.660402] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.660435] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[ 1.660605] hub 2-0:1.0: USB hub found
[ 1.660611] hub 2-0:1.0: 2 ports detected
[ 1.660698] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.660706] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.660711] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.660756] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.660799] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 1.660961] hub 3-0:1.0: USB hub found
[ 1.660967] hub 3-0:1.0: 2 ports detected
[ 1.661049] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.661057] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.661062] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.661121] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.661165] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 1.661321] hub 4-0:1.0: USB hub found
[ 1.661326] hub 4-0:1.0: 2 ports detected
[ 1.661406] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.661414] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.661419] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.661465] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.661515] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 1.661674] hub 5-0:1.0: USB hub found
[ 1.661680] hub 5-0:1.0: 2 ports detected
[ 1.661833] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.663971] i8042: Detected active multiplexing controller, rev 1.1
[ 1.666496] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.666504] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.666544] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.666582] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.666616] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.666758] mousedev: PS/2 mouse device common for all mice
[ 1.666985] rtc_cmos 00:06: RTC can wake from S4
[ 1.667116] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.667151] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.667275] device-mapper: uevent: version 1.0.3
[ 1.667377] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[ 1.667423] EISA: Probing bus 0 at eisa.0
[ 1.667431] Cannot allocate resource for EISA slot 1
[ 1.667434] Cannot allocate resource for EISA slot 2
[ 1.667437] Cannot allocate resource for EISA slot 3
[ 1.667440] Cannot allocate resource for EISA slot 4
[ 1.667443] Cannot allocate resource for EISA slot 5
[ 1.667446] Cannot allocate resource for EISA slot 6
[ 1.667449] Cannot allocate resource for EISA slot 7
[ 1.667456] EISA: Detected 0 cards.
[ 1.667468] cpufreq-nforce2: No nForce2 chipset.
[ 1.667552] cpuidle: using governor ladder
[ 1.667689] cpuidle: using governor menu
[ 1.667692] EFI Variables Facility v0.08 2004-May-17
[ 1.668110] TCP cubic registered
[ 1.668312] NET: Registered protocol family 10
[ 1.669146] NET: Registered protocol family 17
[ 1.669166] Registering the dns_resolver key type
[ 1.669188] Using IPI No-Shortcut mode
[ 1.669290] PM: Hibernation image not present or could not be loaded.
[ 1.669312] registered taskstats version 1
[ 1.680830] Magic number: 7:679:245
[ 1.680959] rtc_cmos 00:06: setting system clock to 2011-12-18 20:14:55 UTC (1324239295)
[ 1.681477] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.681480] EDD information not available.
[ 1.699138] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.804515] ata2.00: ATAPI: HL-DT-STCD-RW/DVD DRIVE GCC-4244N, 1.00, max UDMA/33
[ 1.805002] ata1.00: ATA-7: ST98823AS, 3.06, max UDMA/133
[ 1.805007] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.820561] ata2.00: configured for UDMA/33
[ 1.820685] ata1.00: configured for UDMA/133
[ 1.820893] scsi 0:0:0:0: Direct-Access ATA ST98823AS 3.06 PQ: 0 ANSI: 5
[ 1.821067] sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.821083] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.821145] sd 0:0:0:0: [sda] Write Protect is off
[ 1.821150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.821253] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.825566] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4244N 1.00 PQ: 0 ANSI: 5
[ 1.830653] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.830657] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.830775] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.830842] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.875232] sda: sda1 sda2 < sda5 >
[ 1.875745] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.875828] Freeing unused kernel memory: 696k freed
[ 1.876146] Write protecting the kernel text: 5336k
[ 1.876227] Write protecting the kernel read-only data: 2192k
[ 1.897151] udevd[85]: starting version 173
[ 1.967878] tg3.c:v3.119 (May 18, 2011)
[ 1.967897] tg3 0000:04:00.0: enabling device (0000 -> 0002)
[ 1.967909] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.967924] tg3 0000:04:00.0: setting latency timer to 64
[ 2.028087] usb 1-2: new high speed USB device number 3 using ehci_hcd
[ 2.028487] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95789) rev 4201] (PCI Express) MAC address 00:16:36:32:7f:f9
[ 2.028494] tg3 0000:04:00.0: eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.028499] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.028503] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.055522] firewire_ohci 0000:0a:09.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.108172] firewire_ohci: Added fw-ohci device 0000:0a:09.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 2.173249] usbcore: registered new interface driver uas
[ 2.174453] Initializing USB Mass Storage driver...
[ 2.174567] usb-storage 1-2:1.0: Quirks match for vid 152d pid 2329: 8020
[ 2.174602] scsi2 : usb-storage 1-2:1.0
[ 2.174735] usbcore: registered new interface driver usb-storage
[ 2.174738] USB Mass Storage support registered.
[ 2.460751] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.608205] firewire_core: created device fw0: GUID 00c09f000095250b, S400
[ 2.744082] usb 2-1: new low speed USB device number 2 using uhci_hcd
[ 3.172064] usb 3-1: new full speed USB device number 2 using uhci_hcd
[ 3.172794] scsi 2:0:0:0: Direct-Access ST950032 5AS PQ: 0 ANSI: 2 CCS
[ 3.172881] scsi: killing requests for dead queue
[ 3.176177] scsi: killing requests for dead queue
[ 3.192130] scsi: killing requests for dead queue
[ 3.200174] scsi: killing requests for dead queue
[ 3.200298] scsi: killing requests for dead queue
[ 3.200420] scsi: killing requests for dead queue
[ 3.200543] scsi: killing requests for dead queue
[ 3.200659] scsi: killing requests for dead queue
[ 3.200918] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.201535] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.202272] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.202279] sd 2:0:0:0: [sdb] Mode Sense: 28 00 00 00
[ 3.203023] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.203029] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.205398] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.205404] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.255989] sdb:
[ 3.258515] sd 2:0:0:0: [sdb] No Caching mode page present
[ 3.258521] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 3.258527] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.596051] usb 3-2: new full speed USB device number 3 using uhci_hcd
[ 4.004068] usb 4-1: new full speed USB device number 2 using uhci_hcd
[ 17.432633] udevd[314]: starting version 173
[ 17.485009] lp: driver loaded but no devices found
[ 17.540977] Adding 1045500k swap on /dev/sda5. Priority:-1 extents:1 across:1045500k
[ 17.575035] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 17.903345] [drm] Initialized drm 1.1.0 20060810
[ 17.934668] [drm] radeon defaulting to kernel modesetting.
[ 17.934673] [drm] radeon kernel modesetting enabled.
[ 17.934764] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 17.934771] radeon 0000:01:00.0: setting latency timer to 64
[ 17.935015] [drm] initializing kernel modesetting (RV515 0x1002:0x7145 0x1025:0x0094).
[ 17.935035] [drm] register mmio base: 0xC8100000
[ 17.935038] [drm] register mmio size: 65536
[ 17.935189] ATOM BIOS: M54P
[ 17.935210] [drm] Generation 2 PCI interface, using max accessible memory
[ 17.935216] radeon 0000:01:00.0: VRAM: 128M 0x0000000000000000 - 0x0000000007FFFFFF (128M used)
[ 17.935221] radeon 0000:01:00.0: GTT: 512M 0x0000000008000000 - 0x0000000027FFFFFF
[ 17.935243] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 17.935246] [drm] Driver supports precise vblank timestamp query.
[ 17.935295] radeon 0000:01:00.0: irq 45 for MSI/MSI-X
[ 17.935302] radeon 0000:01:00.0: radeon: using MSI.
[ 17.935334] [drm] radeon: irq initialized.
[ 17.935992] [drm] Detected VRAM RAM=128M, BAR=128M
[ 17.935998] [drm] RAM width 64bits DDR
[ 17.937607] [TTM] Zone kernel: Available graphics memory: 443398 kiB.
[ 17.937612] [TTM] Zone highmem: Available graphics memory: 512266 kiB.
[ 17.937615] [TTM] Initializing pool allocator.
[ 17.937647] [drm] radeon: 128M of VRAM memory ready
[ 17.937649] [drm] radeon: 512M of GTT memory ready.
[ 17.937673] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 17.939799] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 17.941548] [drm] PCIE GART of 512M enabled (table at 0x00040000).
[ 17.945750] radeon 0000:01:00.0: WB enabled
[ 17.945828] [drm] Loading R500 Microcode
[ 17.993743] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 17.993810] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 17.993848] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.013127] [drm] radeon: ring at 0x0000000008001000
[ 18.013167] [drm] ring test succeeded in 9 usecs
[ 18.013384] [drm] radeon: ib pool ready.
[ 18.013487] [drm] ib test succeeded in 0 usecs
[ 18.013878] [drm] Radeon Display Connectors
[ 18.013880] [drm] Connector 0:
[ 18.013883] [drm] VGA
[ 18.013886] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[ 18.013889] [drm] Encoders:
[ 18.013892] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 18.013894] [drm] Connector 1:
[ 18.013896] [drm] LVDS
[ 18.013899] [drm] DDC: 0x7e30 0x7e30 0x7e34 0x7e34 0x7e38 0x7e38 0x7e3c 0x7e3c
[ 18.013902] [drm] Encoders:
[ 18.013904] [drm] LCD1: INTERNAL_LVTM1
[ 18.013906] [drm] Connector 2:
[ 18.013908] [drm] S-video
[ 18.013910] [drm] Encoders:
[ 18.013913] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 18.013915] [drm] Connector 3:
[ 18.013917] [drm] DVI-I
[ 18.013919] [drm] HPD1
[ 18.013922] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[ 18.013925] [drm] Encoders:
[ 18.013927] [drm] DFP1: INTERNAL_KLDSCP_TMDS1
[ 18.054745] intel_rng: FWH not detected
[ 18.071441] wmi: Mapper loaded
[ 18.073272] leds_ss4200: no LED devices found
[ 18.080363] hda_codec: ALC883: BIOS auto-probing.
[ 18.088745] type=1400 audit(1324232111.905:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=610 comm="apparmor_parser"
[ 18.089343] type=1400 audit(1324232111.905:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=610 comm="apparmor_parser"
[ 18.089405] type=1400 audit(1324232111.905:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=634 comm="apparmor_parser"
[ 18.089720] type=1400 audit(1324232111.905:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=610 comm="apparmor_parser"
[ 18.089991] type=1400 audit(1324232111.905:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=634 comm="apparmor_parser"
[ 18.090370] type=1400 audit(1324232111.905:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=634 comm="apparmor_parser"
[ 18.100344] irda_init()
[ 18.100360] NET: Registered protocol family 23
[ 18.169428] cfg80211: Calling CRDA to update world regulatory domain
[ 18.220799] yenta_cardbus 0000:0a:09.0: CardBus bridge found [1025:0094]
[ 18.220826] yenta_cardbus 0000:0a:09.0: Using CSCINT to route CSC interrupts to PCI
[ 18.220830] yenta_cardbus 0000:0a:09.0: Routing CardBus interrupts to PCI
[ 18.220838] yenta_cardbus 0000:0a:09.0: TI: mfunc 0x01321b22, devctl 0x66
[ 18.224657] Bluetooth: Core ver 2.16
[ 18.224713] NET: Registered protocol family 31
[ 18.224716] Bluetooth: HCI device and connection manager initialized
[ 18.224720] Bluetooth: HCI socket layer initialized
[ 18.224722] Bluetooth: L2CAP socket layer initialized
[ 18.230779] Bluetooth: SCO socket layer initialized
[ 18.232198] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 18.247406] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 18.251270] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 18.251275] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 18.251348] iwl3945 0000:03:00.0: enabling device (0000 -> 0002)
[ 18.251362] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.251383] iwl3945 0000:03:00.0: setting latency timer to 64
[ 18.316834] usbcore: registered new interface driver btusb
[ 18.318978] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
[ 18.327053] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 4 802.11a channels
[ 18.327059] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 18.327245] iwl3945 0000:03:00.0: irq 47 for MSI/MSI-X
[ 18.331615] Registered led device: phy0-led
[ 18.331654] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.339470] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
[ 18.339927] generic-usb 0003:045E:0737.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.0-1/input0
[ 18.340108] usbcore: registered new interface driver usbhid
[ 18.340112] usbhid: USB HID core driver
[ 18.343558] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 18.343564] cfg80211: World regulatory domain updated:
[ 18.343567] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.343571] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.343575] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.343579] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 18.343583] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.343587] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 18.357630] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 18.461086] yenta_cardbus 0000:0a:09.0: ISA IRQ mask 0x0cf8, PCI irq 20
[ 18.461093] yenta_cardbus 0000:0a:09.0: Socket status: 30000006
[ 18.461099] pci_bus 0000:0a: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 18.461110] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [io 0x3000-0x3fff]
[ 18.461115] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: excluding 0x3000-0x30ff 0x3400-0x34ff
[ 18.467964] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0xc8400000-0xc84fffff]
[ 18.467969] pcmcia_socket pcmcia_socket0: cs: memory probe 0xc8400000-0xc84fffff: excluding 0xc8400000-0xc840ffff
[ 18.467986] yenta_cardbus 0000:0a:09.0: pcmcia: parent PCI bridge window: [mem 0x40000000-0x43ffffff pref]
[ 18.467991] pcmcia_socket pcmcia_socket0: cs: memory probe 0x40000000-0x43ffffff: excluding 0x40000000-0x43ffffff
[ 18.471789] tifm_7xx1 0000:0a:09.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 18.490708] [drm] Radeon display connector LVDS-1: Found valid EDID
[ 18.501528] [drm] Radeon display connector DVI-I-1: No monitor connected or invalid EDID
[ 18.501563] [drm] radeon: power management initialized
[ 18.558338] type=1400 audit(1324232112.373:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=801 comm="apparmor_parser"
[ 18.559669] type=1400 audit(1324232112.373:9): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=800 comm="apparmor_parser"
[ 18.561669] type=1400 audit(1324232112.377:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=802 comm="apparmor_parser"
[ 18.562274] type=1400 audit(1324232112.377:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=802 comm="apparmor_parser"
[ 18.603263] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000/0x0
[ 18.627168] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x377
[ 18.629213] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 18.630078] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 18.630803] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 18.631588] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xd3fff 0xdc000-0xfffff
[ 18.631663] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 18.631739] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
[ 18.631818] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 18.648858] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 18.801686] init: failsafe main process (734) killed by TERM signal
[ 18.804992] init: apport pre-start process (870) terminated with status 1
[ 18.815855] init: apport post-stop process (909) terminated with status 1
[ 18.881715] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 18.910398] Bluetooth: RFCOMM TTY layer initialized
[ 18.910406] Bluetooth: RFCOMM socket layer initialized
[ 18.910408] Bluetooth: RFCOMM ver 1.11
[ 18.950901] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.957971] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.957977] Bluetooth: BNEP filters: protocol multicast
[ 18.985130] tg3 0000:04:00.0: irq 48 for MSI/MSI-X
[ 19.004529] [drm] fb mappable at 0xD00C0000
[ 19.004533] [drm] vram apper at 0xD0000000
[ 19.004535] [drm] size 4096000
[ 19.004537] [drm] fb depth is 24
[ 19.004540] [drm] pitch is 5120
[ 19.004796] fbcon: radeondrmfb (fb0) is primary device
[ 19.005036] Console: switching to colour frame buffer device 160x50
[ 19.005083] fb0: radeondrmfb frame buffer device
[ 19.005086] drm: registered panic notifier
[ 19.005095] [drm] Initialized radeon 2.10.0 20080528 for 0000:01:00.0 on minor 0
[ 19.156321] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.164628] init: gdm main process (1018) killed by TERM signal
[ 20.689313] ppdev: user-space parallel port driver
[ 24.173396] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 24.747311] init: plymouth-stop pre-start process (1341) terminated with status 1
[ 29.822189] wlan0: authenticate with 00:1f:9f:d4:86:2f (try 1)
[ 29.824322] wlan0: authenticated
[ 29.827828] wlan0: associate with 00:1f:9f:d4:86:2f (try 1)
[ 29.830272] wlan0: RX AssocResp from 00:1f:9f:d4:86:2f (capab=0x401 status=0 aid=2)
[ 29.830278] wlan0: associated
[ 29.831839] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 30.136072] CE: hpet increased min_delta_ns to 20113 nsec
[ 41.464252] CE: hpet increased min_delta_ns to 30169 nsec
[ 202.024231] usb 3-2: USB disconnect, device number 3
[ 207.224160] usb 3-2: new full speed USB device number 4 using uhci_hcd
niki@niki-Aspire-5670:~$

[the_eye]

Τον κώδικα τον βάζουμε μέσα σε [cοde]κώδικας[/cοde]. Επιλέγουμε το κείμενο και πατάμε το κουμπάκι .

[lepidas]

Καλησπέρα ρε παιδιά,
το πρόβλημα που αντιμετοπίζω έχει ως εξής:
μώλις αγόρασα το wacom bamboo pen ctl470 και πρόσπαθισα μεσω ξενων φορουμ να βρω ακρη πως να το κάνω να δουλεψει αλλα σιγουρα κατι χανω λογο γλωσσας (αγγλικων.)λοιπον το συνδέω παιρνει ρεύμα κανονικά απο την usb αλλα μεχρι εκει...δεν δουλεύει κατα τα αλλα..προφαν'ως μου λοιπουν οι ντραιβερς....κατι παλεψα μεσω εντολών που βρήκα στο νετ αλλα η κατασταση παραμένει ιδια...επισης εκανα και την (απαραδεκτη πιθανοτατα κινηση) να περάσω τουσ drivers τοy cd μεσω wine αλλα οπως ηταν αναμενο τιποτα...οποτε ειστε η μονη μου ελπιδα να μην κλαιω τα λεφτάκια μου...
η οποιαδήποτε βοήθεια εναι απαραιτητη ευχαριστη αλλα πανς απ ολα βαλσαμο ταλαιπορουμε καμια ώρα και....
ευχαριστώ εκ των προταίρων.

φίλος το έλυσες το πρόβλημα με την ταμπλέτα?