Δεν βρίσκει την ενσωματωμένη κάμερα xubuntu 12.04

...hardware-drivers για περιφερειακά (εκτυπωτές, κάμερες, εξ. σκληροί, κλπ)
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb

Δεν βρίσκει την ενσωματωμένη κάμερα xubuntu 12.04

Δημοσίευσηαπό adem1 » 04 Οκτ 2012, 00:22

Κώδικας: Επιλογή όλων
2 Ubuntu 12.04 precise 3.2.0-31-generic-pae 32bit (en_US.UTF-8),
3 Intel Core2 CPU T5500 1.66GHz ‖ RAM 2011 MiB ‖ Acer Grapevine - Acer Aspire 5630
4 nVidia G72M [Quadro NVS 110M/GeForce Go 7300] [10de:01d7] (rev a1)
5 wlan0: Intel PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02)

Μόλις έκαμα εγκατάσταση xubuntu 12.04 στον παραπάνω υπολογιστή υπολογιστή.
Εγκατέστησα το cheese για να δοκιμάσω την κάμερα αλλά δεν.
Το ίδιο έγινε και στο live usb.
Η διαφορα που είδα στο liveusb ήταν ότι δούλευε η κάμερα κανονικά στο skype μόνο. Είδα και κάποια παλιά θέματα αλλά δεν έβγαλα άκρη.
Επίσης δοκίμασα να κάνω capture με τον vlc και μου έβγαλε σφάλμα
Κώδικας: Επιλογή όλων
Η είσοδός σας δεν μπορεί να ανοιχτεί:
O VLC δεν είναι δυνατόν να ανοίξει το MRL 'v4l2:///dev/video0'. Ελέγξτε το καταγραφολόγιο για λεπτομέρειες.

Έξοδος lsusb
Κώδικας: Επιλογή όλων
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 046d:0896 Logitech, Inc. OrbiCam

Έξοδος dmesg
Κώδικας: Επιλογή όλων
0228)
[ 0.000000] ACPI: SSDT 7fe853ac 004E6 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fe80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fe80
[ 0.000000] On node 0 totalpages: 523791
[ 0.000000] free_area_init_node: node 0, pgdat c1822ec0, node_mem_map f54ec200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294260 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77d7000 s31616 r0 d21632 u53248
[ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519697
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-31-generic root=UUID=d0e8d4b5-b277-418e-bd4a-e41bb0617a5b ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8382208 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fe80)
[ 0.000000] Memory: 2045788k/2095616k available (5618k kernel code, 49376k reserved, 2762k data, 712k init, 1186312k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1830000 - 0xc18e2000 ( 712 kB)
[ 0.000000] .data : 0xc157cb04 - 0xc182f5c0 (2762 kB)
[ 0.000000] .text : 0xc1000000 - 0xc157cb04 (5618 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f4808000 soft=f480a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1662.308 MHz processor.
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3324.61 BogoMIPS (lpj=6649232)
[ 0.004014] pid_max: default: 32768 minimum: 301
[ 0.004058] Security Framework initialized
[ 0.004090] AppArmor: AppArmor initialized
[ 0.004094] Yama: becoming mindful.
[ 0.004206] Mount-cache hash table entries: 512
[ 0.004462] Initializing cgroup subsys cpuacct
[ 0.004475] Initializing cgroup subsys memory
[ 0.004491] Initializing cgroup subsys devices
[ 0.004496] Initializing cgroup subsys freezer
[ 0.004501] Initializing cgroup subsys blkio
[ 0.004515] Initializing cgroup subsys perf_event
[ 0.004567] CPU: Physical Processor ID: 0
[ 0.004572] CPU: Processor Core ID: 0
[ 0.004579] mce: CPU supports 6 MCE banks
[ 0.004595] CPU0: Thermal monitoring enabled (TM2)
[ 0.004602] using mwait in idle threads.
[ 0.009056] ACPI: Core revision 20110623
[ 0.024026] ftrace: allocating 25901 entries in 51 pages
[ 0.028084] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.028597] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071213] CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 0.072003] APIC calibration not consistent with PM-Timer: 187ms instead of 100ms
[ 0.072003] APIC delta adjusted to PM-Timer: 1039060 (1953412)
[ 0.072003] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
[ 0.072003] PEBS disabled due to CPU errata.
[ 0.072003] ... version: 2
[ 0.072003] ... bit width: 40
[ 0.072003] ... generic registers: 2
[ 0.072003] ... value mask: 000000ffffffffff
[ 0.072003] ... max period: 000000007fffffff
[ 0.072003] ... fixed-purpose events: 3
[ 0.072003] ... event mask: 0000000700000003
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] CPU 1 irqstacks, hard=f48ea000 soft=f48ec000
[ 0.072003] Booting Node 0, Processors #1 Ok.
[ 0.072003] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.160058] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160129] Brought up 2 CPUs
[ 0.160134] Total of 2 processors activated (6649.70 BogoMIPS).
[ 0.162622] devtmpfs: initialized
[ 0.162622] EVM: security.selinux
[ 0.162622] EVM: security.SMACK64
[ 0.162622] EVM: security.capability
[ 0.162622] PM: Registering ACPI NVS region at 7fe80000 (524288 bytes)
[ 0.165712] print_constraints: dummy:
[ 0.165769] RTC time: 0:06:45, date: 10/04/12
[ 0.165855] NET: Registered protocol family 16
[ 0.165965] Trying to unpack rootfs image as initramfs...
[ 0.166155] EISA bus registered
[ 0.166221] ACPI: bus type pci registered
[ 0.166361] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.166369] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.166374] PCI: Using MMCONFIG for extended config space
[ 0.166379] PCI: Using configuration type 1 for base access
[ 0.180319] bio: create slab <bio-0> at 0
[ 0.180346] ACPI: Added _OSI(Module Device)
[ 0.180352] ACPI: Added _OSI(Processor Device)
[ 0.180358] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.180363] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.183756] ACPI: EC: Look up EC in DSDT
[ 0.191186] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.192319] ACPI: SSDT 7fe860de 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.193178] ACPI: Dynamic OEM Table Load:
[ 0.193186] ACPI: SSDT (null) 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.193471] ACPI: SSDT 7fe85b97 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.194285] ACPI: Dynamic OEM Table Load:
[ 0.194293] ACPI: SSDT (null) 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.194891] ACPI: SSDT 7fe862d4 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.195737] ACPI: Dynamic OEM Table Load:
[ 0.195745] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.196019] ACPI: SSDT 7fe86059 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.196855] ACPI: Dynamic OEM Table Load:
[ 0.196863] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.197604] ACPI: Interpreter enabled
[ 0.197628] ACPI: (supports S0 S3 S4 S5)
[ 0.197671] ACPI: Using IOAPIC for interrupt routing
[ 0.251361] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.251792] ACPI: No dock devices found.
[ 0.251798] HEST: Table not found.
[ 0.251808] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.252457] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.253692] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.253700] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.253707] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.253715] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
[ 0.253721] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.253728] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.253734] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.253742] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
[ 0.253767] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[ 0.253870] pci 0000:00:01.0: [8086:27a1] type 1 class 0x000604
[ 0.253966] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.253975] pci 0000:00:01.0: PME# disabled
[ 0.254078] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.254114] pci 0000:00:1b.0: reg 10: [mem 0xd2400000-0xd2403fff 64bit]
[ 0.254267] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.254277] pci 0000:00:1b.0: PME# disabled
[ 0.254322] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.254484] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.254494] pci 0000:00:1c.0: PME# disabled
[ 0.254543] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[ 0.254704] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.254713] pci 0000:00:1c.1: PME# disabled
[ 0.254762] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.254924] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.254933] pci 0000:00:1c.2: PME# disabled
[ 0.254982] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.255142] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.255151] pci 0000:00:1c.3: PME# disabled
[ 0.255201] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.255284] pci 0000:00:1d.0: reg 20: [io 0x1800-0x181f]
[ 0.255348] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.255430] pci 0000:00:1d.1: reg 20: [io 0x1820-0x183f]
[ 0.255495] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.255578] pci 0000:00:1d.2: reg 20: [io 0x1840-0x185f]
[ 0.255643] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.255725] pci 0000:00:1d.3: reg 20: [io 0x1860-0x187f]
[ 0.255807] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.255843] pci 0000:00:1d.7: reg 10: [mem 0xd2404000-0xd24043ff]
[ 0.255997] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.256007] pci 0000:00:1d.7: PME# disabled
[ 0.256051] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.256197] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.256353] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.256365] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.256374] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0230 (mask 000f)
[ 0.256384] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f)
[ 0.256478] pci 0000:00:1f.2: [8086:27c4] type 0 class 0x000101
[ 0.256511] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.256531] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.256550] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.256569] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.256588] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf]
[ 0.256671] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.256680] pci 0000:00:1f.2: PME# disabled
[ 0.256709] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.256811] pci 0000:00:1f.3: reg 20: [io 0x18c0-0x18df]
[ 0.256961] pci 0000:01:00.0: [10de:01d7] type 0 class 0x000300
[ 0.256981] pci 0000:01:00.0: reg 10: [mem 0xd1000000-0xd1ffffff]
[ 0.257003] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.257025] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd0ffffff 64bit]
[ 0.257051] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.257126] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.257142] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.257153] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.257164] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.257257] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.257364] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.257472] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.257651] pci 0000:05:00.0: [8086:4222] type 0 class 0x000280
[ 0.257717] pci 0000:05:00.0: reg 10: [mem 0xd2100000-0xd2100fff]
[ 0.258190] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.258207] pci 0000:05:00.0: PME# disabled
[ 0.258287] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.258336] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.258349] pci 0000:00:1c.3: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.258429] pci 0000:06:01.0: [14e4:170c] type 0 class 0x000200
[ 0.258461] pci 0000:06:01.0: reg 10: [mem 0xd2000000-0xd2001fff]
[ 0.258600] pci 0000:06:01.0: supports D1 D2
[ 0.258605] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.258615] pci 0000:06:01.0: PME# disabled
[ 0.258655] pci 0000:06:04.0: [1524:1412] type 2 class 0x000607
[ 0.258690] pci 0000:06:04.0: reg 10: [mem 0xd2002000-0xd2002fff]
[ 0.258750] pci 0000:06:04.0: supports D1 D2
[ 0.258755] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.258765] pci 0000:06:04.0: PME# disabled
[ 0.258800] pci 0000:06:04.1: [1524:0530] type 0 class 0x000501
[ 0.258836] pci 0000:06:04.1: reg 10: [mem 0xd2003000-0xd200307f]
[ 0.258991] pci 0000:06:04.1: supports D1 D2
[ 0.258997] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.259007] pci 0000:06:04.1: PME# disabled
[ 0.259042] pci 0000:06:04.2: [1524:0550] type 0 class 0x000805
[ 0.259079] pci 0000:06:04.2: reg 10: [mem 0xd2003400-0xd20034ff]
[ 0.259234] pci 0000:06:04.2: supports D1 D2
[ 0.259239] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot
[ 0.259249] pci 0000:06:04.2: PME# disabled
[ 0.259284] pci 0000:06:04.3: [1524:0520] type 0 class 0x000501
[ 0.259321] pci 0000:06:04.3: reg 10: [mem 0xd2003800-0xd200387f]
[ 0.259477] pci 0000:06:04.3: supports D1 D2
[ 0.259482] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.259491] pci 0000:06:04.3: PME# disabled
[ 0.259527] pci 0000:06:04.4: [1524:0551] type 0 class 0x000501
[ 0.259563] pci 0000:06:04.4: reg 10: [mem 0x00000000-0x000000ff]
[ 0.259719] pci 0000:06:04.4: supports D1 D2
[ 0.259724] pci 0000:06:04.4: PME# supported from D0 D1 D2 D3hot
[ 0.259734] pci 0000:06:04.4: PME# disabled
[ 0.259821] pci 0000:00:1e.0: PCI bridge to [bus 06-07] (subtractive decode)
[ 0.259835] pci 0000:00:1e.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 0.259849] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.259855] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.259929] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-07]
[ 0.259987] pci_bus 0000:00: on NUMA node 0
[ 0.259995] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.260386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.260524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.260640] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.260754] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.260867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.261040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.261258] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.261265] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.261270] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.270339] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
[ 0.270456] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
[ 0.270566] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
[ 0.270677] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
[ 0.270787] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 10 12 14 15) *0, disabled.
[ 0.270897] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *10
[ 0.271007] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
[ 0.271114] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
[ 0.271373] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.271389] vgaarb: loaded
[ 0.271392] vgaarb: bridge control possible 0000:01:00.0
[ 0.271672] i2c-core: driver [aat2870] using legacy suspend method
[ 0.271676] i2c-core: driver [aat2870] using legacy resume method
[ 0.271866] SCSI subsystem initialized
[ 0.272017] libata version 3.00 loaded.
[ 0.272108] usbcore: registered new interface driver usbfs
[ 0.272137] usbcore: registered new interface driver hub
[ 0.272199] usbcore: registered new device driver usb
[ 0.272429] PCI: Using ACPI for IRQ routing
[ 0.286996] PCI: pci_cache_line_size set to 64 bytes
[ 0.287211] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.287218] reserve RAM buffer: 000000007fe80000 - 000000007fffffff
[ 0.287484] NetLabel: Initializing
[ 0.287489] NetLabel: domain hash size = 128
[ 0.287493] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.287517] NetLabel: unlabeled traffic allowed by default
[ 0.287646] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.287657] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.287670] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.296134] Switching to clocksource hpet
[ 0.315280] AppArmor: AppArmor Filesystem Enabled
[ 0.315338] pnp: PnP ACPI init
[ 0.315380] ACPI: bus type pnp registered
[ 0.316113] pnp 00:00: [bus 00-ff]
[ 0.316120] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.316126] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.316132] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.316137] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.316148] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.316153] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.316159] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.316165] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.316170] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.316176] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.316181] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.316187] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.316192] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.316198] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.316204] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.316209] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.316215] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.316220] pnp 00:00: [mem 0x80000000-0xfebfffff window]
[ 0.316226] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.316385] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.316411] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.316416] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.316422] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.316427] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.316432] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.316437] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.316572] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.316580] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.316587] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.316594] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.316601] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.316608] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.316617] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.336096] pnp 00:02: [io 0x0000-0x001f]
[ 0.336102] pnp 00:02: [io 0x0081-0x0091]
[ 0.336107] pnp 00:02: [io 0x0093-0x009f]
[ 0.336112] pnp 00:02: [io 0x00c0-0x00df]
[ 0.336118] pnp 00:02: [dma 4]
[ 0.336270] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.336294] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.336403] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.336559] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.336730] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.336740] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.336768] pnp 00:05: [io 0x00f0]
[ 0.336789] pnp 00:05: [irq 13]
[ 0.336907] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.336959] pnp 00:06: [io 0x002e-0x002f]
[ 0.336965] pnp 00:06: [io 0x004e-0x004f]
[ 0.336970] pnp 00:06: [io 0x0061]
[ 0.336975] pnp 00:06: [io 0x0063]
[ 0.336979] pnp 00:06: [io 0x0065]
[ 0.336984] pnp 00:06: [io 0x0067]
[ 0.336988] pnp 00:06: [io 0x0070]
[ 0.336993] pnp 00:06: [io 0x0080]
[ 0.336998] pnp 00:06: [io 0x0092]
[ 0.337002] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.337007] pnp 00:06: [io 0x0800-0x080f]
[ 0.337013] pnp 00:06: [io 0x1000-0x107f]
[ 0.337017] pnp 00:06: [io 0x1180-0x11bf]
[ 0.337022] pnp 00:06: [io 0x1640-0x164f]
[ 0.337027] pnp 00:06: [io 0xfe00-0xfefe]
[ 0.337032] pnp 00:06: [io 0xff2c-0xff2f]
[ 0.337208] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.337215] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.337222] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.337229] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.337235] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.337242] system 00:06: [io 0xff2c-0xff2f] has been reserved
[ 0.337250] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.337273] pnp 00:07: [io 0x0070-0x0077]
[ 0.337284] pnp 00:07: [irq 8]
[ 0.337403] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.337431] pnp 00:08: [io 0x0060]
[ 0.337436] pnp 00:08: [io 0x0064]
[ 0.337448] pnp 00:08: [irq 1]
[ 0.337563] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.337661] pnp 00:09: [irq 12]
[ 0.337783] pnp 00:09: Plug and Play ACPI device, IDs SYN0703 SYN0700 SYN0002 PNP0f13 (active)
[ 0.337898] pnp: PnP ACPI: found 10 devices
[ 0.337903] ACPI: ACPI bus type pnp unregistered
[ 0.337910] PnPBIOS: Disabled by ACPI PNP
[ 0.376973] PCI: max bus depth: 2 pci_try_num: 3
[ 0.377098] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.377108] pci 0000:00:1e.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.377117] pci 0000:00:1c.3: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref]
[ 0.377125] pci 0000:00:1c.3: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.377132] pci 0000:00:1c.2: BAR 14: assigned [mem 0x84200000-0x843fffff]
[ 0.377139] pci 0000:00:1c.2: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref]
[ 0.377147] pci 0000:00:1c.2: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.377154] pci 0000:00:1c.1: BAR 14: assigned [mem 0x84600000-0x847fffff]
[ 0.377161] pci 0000:00:1c.1: BAR 15: assigned [mem 0x84800000-0x849fffff 64bit pref]
[ 0.377169] pci 0000:00:1c.1: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.377176] pci 0000:00:1c.0: BAR 14: assigned [mem 0x84a00000-0x84bfffff]
[ 0.377184] pci 0000:00:1c.0: BAR 15: assigned [mem 0x84c00000-0x84dfffff 64bit pref]
[ 0.377192] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.377201] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
[ 0.377207] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.377217] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd1ffffff]
[ 0.377225] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.377236] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.377244] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.377255] pci 0000:00:1c.0: bridge window [mem 0x84a00000-0x84bfffff]
[ 0.377265] pci 0000:00:1c.0: bridge window [mem 0x84c00000-0x84dfffff 64bit pref]
[ 0.377279] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.377287] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.377298] pci 0000:00:1c.1: bridge window [mem 0x84600000-0x847fffff]
[ 0.377308] pci 0000:00:1c.1: bridge window [mem 0x84800000-0x849fffff 64bit pref]
[ 0.377322] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.377329] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.377341] pci 0000:00:1c.2: bridge window [mem 0x84200000-0x843fffff]
[ 0.377351] pci 0000:00:1c.2: bridge window [mem 0x84400000-0x845fffff 64bit pref]
[ 0.377365] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.377372] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.377383] pci 0000:00:1c.3: bridge window [mem 0xd2100000-0xd21fffff]
[ 0.377393] pci 0000:00:1c.3: bridge window [mem 0x84000000-0x841fffff 64bit pref]
[ 0.377411] pci 0000:06:04.4: BAR 0: assigned [mem 0xd2003100-0xd20031ff]
[ 0.377423] pci 0000:06:04.4: BAR 0: set to [mem 0xd2003100-0xd20031ff] (PCI address [0xd2003100-0xd20031ff])
[ 0.377433] pci 0000:06:04.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.377440] pci 0000:06:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[ 0.377446] pci 0000:06:04.0: BAR 14: assigned [io 0x2000-0x20ff]
[ 0.377452] pci 0000:06:04.0: BAR 13: assigned [io 0x2400-0x24ff]
[ 0.377459] pci 0000:06:04.0: CardBus bridge to [bus 07-0a]
[ 0.377464] pci 0000:06:04.0: bridge window [io 0x2400-0x24ff]
[ 0.377474] pci 0000:06:04.0: bridge window [io 0x2000-0x20ff]
[ 0.377485] pci 0000:06:04.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.377495] pci 0000:06:04.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.377506] pci 0000:00:1e.0: PCI bridge to [bus 06-07]
[ 0.377513] pci 0000:00:1e.0: bridge window [io 0x2000-0x2fff]
[ 0.377524] pci 0000:00:1e.0: bridge window [mem 0xd2000000-0xd20fffff]
[ 0.377534] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
[ 0.377584] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.377595] pci 0000:00:01.0: setting latency timer to 64
[ 0.377608] pci 0000:00:1c.0: enabling device (0100 -> 0103)
[ 0.377624] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.377636] pci 0000:00:1c.0: setting latency timer to 64
[ 0.377651] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.377661] pci 0000:00:1c.1: setting latency timer to 64
[ 0.377685] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.377695] pci 0000:00:1c.2: setting latency timer to 64
[ 0.377716] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.377725] pci 0000:00:1c.3: setting latency timer to 64
[ 0.377737] pci 0000:00:1e.0: enabling device (0004 -> 0007)
[ 0.377748] pci 0000:00:1e.0: setting latency timer to 64
[ 0.377763] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.377775] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.377782] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.377789] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd1ffffff]
[ 0.377795] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.377801] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.377807] pci_bus 0000:02: resource 1 [mem 0x84a00000-0x84bfffff]
[ 0.377814] pci_bus 0000:02: resource 2 [mem 0x84c00000-0x84dfffff 64bit pref]
[ 0.377820] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.377827] pci_bus 0000:03: resource 1 [mem 0x84600000-0x847fffff]
[ 0.377833] pci_bus 0000:03: resource 2 [mem 0x84800000-0x849fffff 64bit pref]
[ 0.377839] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.377845] pci_bus 0000:04: resource 1 [mem 0x84200000-0x843fffff]
[ 0.377852] pci_bus 0000:04: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
[ 0.377858] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.377864] pci_bus 0000:05: resource 1 [mem 0xd2100000-0xd21fffff]
[ 0.377870] pci_bus 0000:05: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
[ 0.377876] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.377882] pci_bus 0000:06: resource 1 [mem 0xd2000000-0xd20fffff]
[ 0.377888] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.377894] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.377900] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.377906] pci_bus 0000:07: resource 0 [io 0x2400-0x24ff]
[ 0.377912] pci_bus 0000:07: resource 1 [io 0x2000-0x20ff]
[ 0.377917] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref]
[ 0.377924] pci_bus 0000:07: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.378013] NET: Registered protocol family 2
[ 0.378163] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.378695] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.379407] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.379738] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.379743] TCP reno registered
[ 0.379750] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.379767] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.379922] NET: Registered protocol family 1
[ 0.380049] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.380078] pci 0000:00:1d.0: PCI INT A disabled
[ 0.380095] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.380121] pci 0000:00:1d.1: PCI INT B disabled
[ 0.380137] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.380163] pci 0000:00:1d.2: PCI INT C disabled
[ 0.380178] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.380204] pci 0000:00:1d.3: PCI INT D disabled
[ 0.380222] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.380270] pci 0000:00:1d.7: PCI INT A disabled
[ 0.380316] pci 0000:01:00.0: Boot video device
[ 0.380343] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.380365] Simple Boot Flag at 0x36 set to 0x1
[ 0.381174] audit: initializing netlink socket (disabled)
[ 0.381193] type=2000 audit(1349309205.376:1): initialized
[ 0.428273] highmem bounce pool size: 64 pages
[ 0.428285] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.432940] VFS: Disk quotas dquot_6.5.2
[ 0.433087] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.434401] fuse init (API version 7.17)
[ 0.434626] msgmni has been set to 1678
[ 0.435324] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.435382] io scheduler noop registered
[ 0.435387] io scheduler deadline registered
[ 0.435404] io scheduler cfq registered (default)
[ 0.435703] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.435772] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.435882] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.435966] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.436127] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.436211] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 0.436345] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.436427] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 0.436562] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.436645] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 0.436848] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.436908] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.437070] intel_idle: MWAIT substates: 0x22220
[ 0.437074] intel_idle: does not run on family 6 model 15
[ 0.439141] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.441127] ACPI: AC Adapter [ACAD] (on-line)
[ 0.441288] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.441385] ACPI: Lid Switch [LID]
[ 0.441496] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.441506] ACPI: Sleep Button [SLPB]
[ 0.441606] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.441614] ACPI: Power Button [PWRB]
[ 0.441749] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.441757] ACPI: Power Button [PWRF]
[ 0.460480] Monitor-Mwait will be used to enter C-1 state
[ 0.460541] Monitor-Mwait will be used to enter C-2 state
[ 0.468201] Monitor-Mwait will be used to enter C-3 state
[ 0.468222] Marking TSC unstable due to TSC halts in idle
[ 0.468248] ACPI: acpi_idle registered with cpuidle
[ 0.496661] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.496668] ACPI: Thermal Zone [TZ00] (53 C)
[ 0.826320] Freeing initrd memory: 13832k freed
[ 1.000227] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.000234] ACPI: Thermal Zone [TZ01] (53 C)
[ 1.000319] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.000340] ACPI: Battery Slot [BAT1] (battery present)
[ 1.000422] ERST: Table is not found!
[ 1.000426] GHES: HEST is not enabled!
[ 1.000583] isapnp: Scanning for PnP cards...
[ 1.000685] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.288235] ACPI: Battery Slot [BAT1] (battery present)
[ 1.354798] isapnp: No Plug & Play device found
[ 1.408851] Linux agpgart interface v0.103
[ 1.413093] brd: module loaded
[ 1.415066] loop: module loaded
[ 1.415398] ata_piix 0000:00:1f.2: version 2.13
[ 1.415425] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.415437] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.568054] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.568798] scsi0 : ata_piix
[ 1.568994] scsi1 : ata_piix
[ 1.570383] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 1.570391] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 1.571324] Fixed MDIO Bus: probed
[ 1.571375] tun: Universal TUN/TAP device driver, 1.6
[ 1.571380] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.571496] PPP generic driver version 2.4.2
[ 1.571737] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.571773] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.571799] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.571807] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.571916] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.571950] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 1.571970] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.575852] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.575890] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd2404000
[ 1.588033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.588342] hub 1-0:1.0: USB hub found
[ 1.588352] hub 1-0:1.0: 8 ports detected
[ 1.588548] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.588584] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.588620] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.588636] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.588643] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.588752] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.588790] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[ 1.589090] hub 2-0:1.0: USB hub found
[ 1.589100] hub 2-0:1.0: 2 ports detected
[ 1.589257] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.589271] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.589278] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.589392] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.589448] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 1.589748] hub 3-0:1.0: USB hub found
[ 1.589757] hub 3-0:1.0: 2 ports detected
[ 1.589914] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.589929] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.589936] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.590041] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.590100] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 1.590405] hub 4-0:1.0: USB hub found
[ 1.590415] hub 4-0:1.0: 2 ports detected
[ 1.590580] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 1.590595] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 1.590602] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.590717] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.590772] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 1.591072] hub 5-0:1.0: USB hub found
[ 1.591081] hub 5-0:1.0: 2 ports detected
[ 1.591352] usbcore: registered new interface driver libusual
[ 1.591464] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 1.593064] i8042: Detected active multiplexing controller, rev 1.1
[ 1.593173] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.593186] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.593260] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.593323] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.593389] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.593689] mousedev: PS/2 mouse device common for all mice
[ 1.594217] rtc_cmos 00:07: RTC can wake from S4
[ 1.594433] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.594477] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.594659] device-mapper: uevent: version 1.0.3
[ 1.594855] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.594937] EISA: Probing bus 0 at eisa.0
[ 1.594947] Cannot allocate resource for EISA slot 1
[ 1.594952] Cannot allocate resource for EISA slot 2
[ 1.594957] Cannot allocate resource for EISA slot 3
[ 1.594962] Cannot allocate resource for EISA slot 4
[ 1.594966] Cannot allocate resource for EISA slot 5
[ 1.594971] Cannot allocate resource for EISA slot 6
[ 1.594986] EISA: Detected 0 cards.
[ 1.595006] cpufreq-nforce2: No nForce2 chipset.
[ 1.595174] cpuidle: using governor ladder
[ 1.595422] cpuidle: using governor menu
[ 1.595428] EFI Variables Facility v0.08 2004-May-17
[ 1.596103] TCP cubic registered
[ 1.596413] NET: Registered protocol family 10
[ 1.596866] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.598236] NET: Registered protocol family 17
[ 1.598250] Registering the dns_resolver key type
[ 1.598295] Using IPI No-Shortcut mode
[ 1.598608] PM: Hibernation image not present or could not be loaded.
[ 1.598636] registered taskstats version 1
[ 1.614231] Magic number: 0:385:101
[ 1.614381] rtc_cmos 00:07: setting system clock to 2012-10-04 00:06:47 UTC (1349309207)
[ 1.614917] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.614922] EDD information not available.
[ 1.732641] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
[ 1.732971] ata1.00: ATA-7: ST9160821AS, 3.ALC, max UDMA/133
[ 1.732978] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.748614] ata2.00: configured for UDMA/33
[ 1.748684] ata1.00: configured for UDMA/133
[ 1.748884] scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.AL PQ: 0 ANSI: 5
[ 1.749072] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.749108] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.749146] sd 0:0:0:0: [sda] Write Protect is off
[ 1.749150] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.749183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.754309] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PP02 PQ: 0 ANSI: 5
[ 1.759579] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.759585] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.759847] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.760026] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.795899] sda: sda1 sda2 < sda5 >
[ 1.796636] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.796691] Freeing unused kernel memory: 712k freed
[ 1.797035] Write protecting the kernel text: 5620k
[ 1.797110] Write protecting the kernel read-only data: 2324k
[ 1.819453] udevd[94]: starting version 175
[ 1.900094] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 1.944446] sdhci: Secure Digital Host Controller Interface driver
[ 1.944450] sdhci: Copyright(c) Pierre Ossman
[ 1.944836] sdhci-pci 0000:06:04.2: SDHCI controller found [1524:0550] (rev 1)
[ 1.944853] sdhci-pci 0000:06:04.2: enabling device (0000 -> 0002)
[ 1.944865] sdhci-pci 0000:06:04.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.944921] mmc0: no vmmc regulator found
[ 1.944976] Registered led device: mmc0::
[ 1.946028] mmc0: SDHCI controller on PCI [0000:06:04.2] using PIO
[ 1.946043] sdhci-pci 0000:06:04.4: SDHCI controller found [1524:0551] (rev 1)
[ 1.946056] sdhci-pci 0000:06:04.4: enabling device (0000 -> 0002)
[ 1.946064] sdhci-pci 0000:06:04.4: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.946089] mmc1: no vmmc regulator found
[ 1.946124] Registered led device: mmc1::
[ 1.960309] mmc1: SDHCI controller on PCI [0000:06:04.4] using PIO
[ 1.965955] b44 0000:06:01.0: enabling device (0000 -> 0002)
[ 1.965981] b44 0000:06:01.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.965995] b44 0000:06:01.0: setting latency timer to 64
[ 1.984092] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.984102] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.984114] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 2.032335] ssb: Sonics Silicon Backplane found on PCI device 0000:06:01.0
[ 2.032606] b44: Broadcom 44xx/47xx 10/100 PCI ethernet driver version 2.0
[ 2.057189] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100 PCI ethernet driver 00:16:d4:67:c7:db
[ 2.349591] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.985323] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.284155] udevd[343]: starting version 175
[ 12.333185] Adding 2094076k swap on /dev/sda5. Priority:-1 extents:1 across:2094076k
[ 12.339389] lp: driver loaded but no devices found
[ 12.368042] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 12.414760] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[ 12.416144] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 12.616765] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 12.735784] wmi: Mapper loaded
[ 12.786302] nvidia: module license 'NVIDIA' taints kernel.
[ 12.786307] Disabling lock debugging due to kernel taint
[ 13.246400] intel_rng: FWH not detected
[ 13.260853] cfg80211: Calling CRDA to update world regulatory domain
[ 13.275641] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.275653] nvidia 0000:01:00.0: setting latency timer to 64
[ 13.275660] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 13.281571] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.40 Thu Apr 5 21:28:09 PDT 2012
[ 13.294444] Bluetooth: Core ver 2.16
[ 13.294475] NET: Registered protocol family 31
[ 13.294478] Bluetooth: HCI device and connection manager initialized
[ 13.294483] Bluetooth: HCI socket layer initialized
[ 13.294486] Bluetooth: L2CAP socket layer initialized
[ 13.294494] Bluetooth: SCO socket layer initialized
[ 13.301928] ppdev: user-space parallel port driver
[ 13.308079] Bluetooth: RFCOMM TTY layer initialized
[ 13.308088] Bluetooth: RFCOMM socket layer initialized
[ 13.308091] Bluetooth: RFCOMM ver 1.11
[ 13.333892] leds_ss4200: no LED devices found
[ 13.334058] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.334062] Bluetooth: BNEP filters: protocol multicast
[ 13.337237] yenta_cardbus 0000:06:04.0: CardBus bridge found [1025:0090]
[ 13.337268] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI
[ 13.337271] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI
[ 13.337279] yenta_cardbus 0000:06:04.0: TI: mfunc 0x90501212, devctl 0x44
[ 13.383630] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 13.383635] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 13.383710] iwl3945 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 13.383727] iwl3945 0000:05:00.0: setting latency timer to 64
[ 13.393102] type=1400 audit(1349298419.273:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=636 comm="apparmor_parser"
[ 13.393807] type=1400 audit(1349298419.273:3): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=636 comm="apparmor_parser"
[ 13.444527] iwl3945 0000:05:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 13.444533] iwl3945 0000:05:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 13.444694] iwl3945 0000:05:00.0: irq 45 for MSI/MSI-X
[ 13.482759] Registered led device: phy0-led
[ 13.482828] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 13.483413] Linux video capture interface: v2.00
[ 13.483937] gspca_main: v2.14.0 registered
[ 13.484314] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 13.484795] type=1400 audit(1349298419.365:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=678 comm="apparmor_parser"
[ 13.486654] type=1400 audit(1349298419.365:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=678 comm="apparmor_parser"
[ 13.486988] type=1400 audit(1349298419.365:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=678 comm="apparmor_parser"
[ 13.500313] usbcore: registered new interface driver vc032x
[ 13.511958] ieee80211 phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 13.580875] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 13.580881] yenta_cardbus 0000:06:04.0: Socket status: 30000006
[ 13.580887] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 13.581291] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io 0x2000-0x2fff]
[ 13.581296] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x24ff
[ 13.604488] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xd2000000-0xd20fffff]
[ 13.604495] pcmcia_socket pcmcia_socket0: cs: memory probe 0xd2000000-0xd20fffff: excluding 0xd2000000-0xd200ffff
[ 13.604516] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[ 13.604520] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff
[ 13.677627] init: failsafe main process (707) killed by TERM signal
[ 13.765276] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.765348] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 13.765389] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 13.821115] type=1400 audit(1349298419.701:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=835 comm="apparmor_parser"
[ 13.823295] type=1400 audit(1349298419.701:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=836 comm="apparmor_parser"
[ 13.823906] type=1400 audit(1349298419.701:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=836 comm="apparmor_parser"
[ 13.825057] type=1400 audit(1349298419.705:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=836 comm="apparmor_parser"
[ 13.828987] hda_codec: ALC883: SKU not ready 0x411111f0
[ 13.835797] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 13.847266] type=1400 audit(1349298419.725:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=845 comm="apparmor_parser"
[ 13.868490] acer_wmi: Function bitmap for Communication Device: 0x21
[ 13.869099] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000/0x0
[ 13.871417] Registered led device: acer-wmi::mail
[ 13.890371] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 13.890377] cfg80211: World regulatory domain updated:
[ 13.890380] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.890384] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.890388] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.890392] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 13.890396] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.890400] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.902335] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 13.946236] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 13.949400] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 13.950245] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 13.950935] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 13.952486] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff 0xe0000-0xfffff
[ 13.952530] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 13.952572] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 13.952611] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 14.012072] iwl3945 0000:05:00.0: loaded firmware version 15.32.2.9
[ 14.084373] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.084735] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 14.102044] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.102489] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.235969] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 14.235974] vesafb: scrolling: redraw
[ 14.235978] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 14.237837] vesafb: framebuffer at 0xc0000000, mapped to 0xf8800000, using 3072k, total 3072k
[ 14.239327] Console: switching to colour frame buffer device 128x48
[ 14.239360] fb0: VESA VGA frame buffer device
[ 23.552320] wlan0: authenticate with 00:1b:2f:f0:30:52 (try 1)
[ 23.554526] wlan0: authenticated
[ 23.558102] wlan0: associate with 00:1b:2f:f0:30:52 (try 1)
[ 23.561348] wlan0: RX AssocResp from 00:1b:2f:f0:30:52 (capab=0x411 status=0 aid=2)
[ 23.561355] wlan0: associated
[ 23.565284] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.648077] wlan0: no IPv6 routers present
[ 376.806466] usb 1-4: USB disconnect, device number 2
[ 376.836233] gspca_vc032x: reg_w err -19
[ 378.648130] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 378.824041] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 389.753600] usb 1-4: USB disconnect, device number 3
[ 390.024161] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[ 390.199941] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 934.600607] usb 1-4: USB disconnect, device number 4
[ 934.632075] gspca_vc032x: reg_w err -19
[ 936.444085] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[ 936.619965] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1204.135227] usb 1-4: USB disconnect, device number 5
[ 1204.164119] gspca_vc032x: reg_w err -19
[ 1205.976184] usb 1-4: new high-speed USB device number 6 using ehci_hcd
[ 1206.152209] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1543.201702] usb 1-4: USB disconnect, device number 6
[ 1543.232068] gspca_vc032x: reg_w err -19
[ 1545.044177] usb 1-4: new high-speed USB device number 7 using ehci_hcd
[ 1545.220107] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1608.271239] usb 1-4: USB disconnect, device number 7
[ 1608.300070] gspca_vc032x: reg_w err -19
[ 1610.112082] usb 1-4: new high-speed USB device number 8 using ehci_hcd
[ 1610.288339] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1752.335298] usb 1-4: USB disconnect, device number 8
[ 1752.364057] gspca_vc032x: reg_w err -19
[ 1754.176093] usb 1-4: new high-speed USB device number 9 using ehci_hcd
[ 1754.351749] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1853.411773] usb 1-4: USB disconnect, device number 9
[ 1853.440122] gspca_vc032x: reg_w err -19
[ 1855.252129] usb 1-4: new high-speed USB device number 10 using ehci_hcd
[ 1855.427887] gspca_main: vc032x-2.14.0 probing 046d:0896

Κάποιος τρόπος επίλυσης;
Τελευταία επεξεργασία από adem1 και 04 Οκτ 2012, 00:55, έχει επεξεργασθεί 2 φορά/ες συνολικά
Pc1
3 Intel Core i5-3317U CPU @ 1.70GHz ‖ RAM 5856 MiB ‖ ASUS S56CA
4 Intel 3rd Gen Core processor Graphics Controller [8086:0166] {i915}
5 wlan0: Qualcomm Atheros AR9485 Wireless Network Adapter [168c:0032] (rev 01) ⋮ eth0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a)
Pc 2
3 Intel Core2 CPU E8400 3.00GHz ‖ RAM 3962 MiB ‖ FOXCONN P45A01
4 ATI RV730XT [Radeon HD 4670] [1002:9490]
5 eth0: Realtek RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Άβαταρ μέλους
adem1
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 733
Εγγραφή: 27 Οκτ 2011, 20:17
IRC: adem1
Εκτύπωση

Re: Δεν βρίσκει την ενσωματωμένη κάμερα xubuntu 12.04

Δημοσίευσηαπό the_eye » 04 Οκτ 2012, 00:53

Δώσε και το αποτέλεσμα της
Κώδικας: Επιλογή όλων
dmesg
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11723
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Δεν βρίσκει την ενσωματωμένη κάμερα xubuntu 12.04

Δημοσίευσηαπό simosx » 04 Οκτ 2012, 01:01

adem1 έγραψε:
[ 13.483937] gspca_main: v2.14.0 registered
[ 13.484314] gspca_main: vc032x-2.14.0 probing 046d:0896


adem1 έγραψε:
[ 376.806466] usb 1-4: USB disconnect, device number 2
[ 376.836233] gspca_vc032x: reg_w err -19
[ 378.648130] usb 1-4: new high-speed USB device number 3 using ehci_hcd
[ 378.824041] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 389.753600] usb 1-4: USB disconnect, device number 3
[ 390.024161] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[ 390.199941] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 934.600607] usb 1-4: USB disconnect, device number 4
[ 934.632075] gspca_vc032x: reg_w err -19
[ 936.444085] usb 1-4: new high-speed USB device number 5 using ehci_hcd
[ 936.619965] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1204.135227] usb 1-4: USB disconnect, device number 5
[ 1204.164119] gspca_vc032x: reg_w err -19
[ 1205.976184] usb 1-4: new high-speed USB device number 6 using ehci_hcd
[ 1206.152209] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1543.201702] usb 1-4: USB disconnect, device number 6
[ 1543.232068] gspca_vc032x: reg_w err -19
[ 1545.044177] usb 1-4: new high-speed USB device number 7 using ehci_hcd
[ 1545.220107] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1608.271239] usb 1-4: USB disconnect, device number 7
[ 1608.300070] gspca_vc032x: reg_w err -19
[ 1610.112082] usb 1-4: new high-speed USB device number 8 using ehci_hcd
[ 1610.288339] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1752.335298] usb 1-4: USB disconnect, device number 8
[ 1752.364057] gspca_vc032x: reg_w err -19
[ 1754.176093] usb 1-4: new high-speed USB device number 9 using ehci_hcd
[ 1754.351749] gspca_main: vc032x-2.14.0 probing 046d:0896
[ 1853.411773] usb 1-4: USB disconnect, device number 9
[ 1853.440122] gspca_vc032x: reg_w err -19
[ 1855.252129] usb 1-4: new high-speed USB device number 10 using ehci_hcd
[ 1855.427887] gspca_main: vc032x-2.14.0 probing 046d:0896


Αυτά είναι τα σχετικά μηνύματα της κάμερας από το dmesg, και δεν είναι ενθαρρυντικά.
Πρόκειται για κάμερα που δεν είναι UVC, οπότε δε λειτουργεί αυτόματα και θέλει το δύσκολο οδηγό GSPCA.

Μπορείς να αναζητήσεις στο διαδίκτυο για 046d:0896 και linux για περισσότερα.
Αναφέρεις ότι λειτουργεί σε μια περίσταση, οπότε μάλλον μπορεί να γίνει κάτι για να λειτουργήσει.
Γενικά η κάμερες που βασίζονται σε gspca δεν συντηρούνται αρκετά καλά.
Αν έχεις τα χρήματα για μια νέα κάμερα που να είναι και HD, υπάρχουν αρκετές με 15-25€.
προσωπικό ιστολόγιο ϗ πλανήτης Ubuntu-gr
Συμβάλετε και εσείς στο ελληνικό βιβλίο Ubuntu!
1 Γνώσεις Linux: Πολύ καλό ┃ Προγραμματισμού: Πολύ καλό ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 13.10 saucy 3.11.0-031100rc1-generic 64bit (el_GR.UTF-8, Unity ubuntu)
3 AMD E-450 APU with Radeon HD Graphics ‖ RAM 3555 MiB ‖ Sony Corporation VAIO
4 AMD nee ATI Wrestler [Radeon HD 6320] [1002:9806] {fglrx_pci}
5 eth0: Atheros Inc. AR8151 v2.0 Gigabit Ethernet [1969:1083] (rev c0) ⋮ wlan0: Atheros Inc. AR9285 [168c:002b] (rev 01)
Φτιάξτε και εσείς τη δική σας υπογραφή (παραπάνω κείμενο) αυτόματα με κλικ εδώ!
simosx
Επίτιμο μέλος
Επίτιμο μέλος
 
Δημοσιεύσεις: 10334
Εγγραφή: 11 Μάιος 2008, 18:52
Launchpad: simosx
IRC: simosx
Εκτύπωση


  • ΣΧΕΤΙΚΑ ΘΕΜΑΤΑ
    ΑΠΑΝΤΗΣΕΙΣ
    ΠΡΟΒΟΛΕΣ
    ΣΥΓΓΡΑΦΕΑΣ

Επιστροφή στο Περιφερειακά