Ρύθμιση Pinnacle PCTV 110i στο ubuntu

[konnos.l]

Γεια σας, επειδή είμαι αρχάριος στο linux έχω την παραπάνω κάρτα και θέλω να την ρυθμίσω. Μπήκα στο site της pinnacle και δεν έχει drivers για linux. Έτρεξα κάτι εντολές στο τερματικό για το είδος της κάρτας όπως είχατε πει σε ένα άλλο παλικάρι και την αναγνωρίζει κανονικά.

[logari81]

Μπήκα στο site της pinnacle και δεν έχει drivers για linux.

driveromania λέγεται η ασθένεια των νέων χρηστών linux να ψάχνουν drivers για τα πάντα. Στο linux το πιθανότερο είναι οι drivers για την συσκευή σας να περιλαμβάνονται ήδη στον πυρήνα. Για εξαιρέσεις δείτε στο Συστημα-Διαχείριση-Οδηγοί Υλικού.

Χρησιμοποιησε απλως καποιο προγραμμα οπως το tvtime ή το vlc για να δεις αν δουλευει η συσκευη. Αν δεν δουλευει δωσε μας το αποτελεσμα των εντολών:

Κώδικας: Επιλογή όλων

lscpi -nn
lsusb
demsg
lsmod

[konnos.l]

Το tvtime μου λέει no signal στο vlc έχω μια απορία. Πάω εκεί που λέει open media ->capture device και στο όνομα συσκευής βίντεο βάζω το όνομα της κάρτας όπως μου το βγάζει απο το τερματικό δηλαδή: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder(αν και η κάρτα μου είναι η Pinnacle PCTV 110i), και όπου λέει όνομα ηχητικής συσκευής βάζω: Creative Labs CA0106 Soundblaster(επίσης απο το τερματικό), στις επιλογές βάζω PAL και μόλις πατάω play και μου βγάζει τα εξής: Your input can't be opened:
VLC is unable to open the MRL 'v4l2://Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder'. Check the log for details.
Όσο για τις εντολές που μου είπες να τρέξω(στην πρώτη εντολή μάλλον ήθελες να γράψεις "lspci -nn" και στην τρίτη "dmesg") τα αποτελέσματα είναι τα εξής:

Κώδικας: Επιλογή όλων


konnosl@konnosl-desktop:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10)
00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10)
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01)
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01)
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01)
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01)
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01)
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01)
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01)
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01)
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01)
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 02)
03:00.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007]
03:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
konnosl@konnosl-desktop:~$ lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 045e:00f4 Microsoft Corp. LifeCam VX-6000 (SN9C20x + OV9650)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 045e:00f9 Microsoft Corp.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

konnosl@konnosl-desktop:~$dmesg
[ 0.200100] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.200109] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.216097] pnp: PnP ACPI init
[ 0.216125] ACPI: bus type pnp registered
[ 0.219430] pnp: PnP ACPI: found 15 devices
[ 0.219434] ACPI: ACPI bus type pnp unregistered
[ 0.219441] PnPBIOS: Disabled by ACPI PNP
[ 0.219455] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.219458] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.219462] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.219466] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.219470] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.219481] system 00:0b: ioport range 0x400-0x4cf could not be reserved
[ 0.219489] system 00:0c: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.219497] system 00:0d: iomem range 0xcb400-0xcbfff has been reserved
[ 0.219501] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.219504] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.219508] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[ 0.219512] system 00:0d: iomem range 0x3f5e0000-0x3f5fffff could not be reserved
[ 0.219516] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.219519] system 00:0d: iomem range 0x100000-0x3f5dffff could not be reserved
[ 0.219524] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.219528] system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved
[ 0.219531] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.219535] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.219539] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
[ 0.219543] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.219546] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[ 0.254254] AppArmor: AppArmor Filesystem Enabled
[ 0.254300] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.254304] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.254310] pci 0000:00:1c.0: MEM window: disabled
[ 0.254315] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.254322] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.254326] pci 0000:00:1c.1: IO window: 0xc000-0xcfff
[ 0.254333] pci 0000:00:1c.1: MEM window: 0xe0000000-0xe0ffffff
[ 0.254338] pci 0000:00:1c.1: PREFETCH window: 0x000000e1100000-0x000000e11fffff
[ 0.254346] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.254350] pci 0000:00:1e.0: IO window: 0xd000-0xdfff
[ 0.254356] pci 0000:00:1e.0: MEM window: 0xe1200000-0xe12fffff
[ 0.254361] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.254376] alloc irq_desc for 16 on node -1
[ 0.254378] alloc kstat_irqs on node -1
[ 0.254385] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.254391] pci 0000:00:1c.0: setting latency timer to 64
[ 0.254399] alloc irq_desc for 17 on node -1
[ 0.254401] alloc kstat_irqs on node -1
[ 0.254406] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.254411] pci 0000:00:1c.1: setting latency timer to 64
[ 0.254418] pci 0000:00:1e.0: setting latency timer to 64
[ 0.254424] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.254427] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.254431] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
[ 0.254434] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
[ 0.254437] pci_bus 0000:02: resource 1 mem: [0xe0000000-0xe0ffffff]
[ 0.254440] pci_bus 0000:02: resource 2 pref mem [0xe1100000-0xe11fffff]
[ 0.254443] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.254446] pci_bus 0000:03: resource 1 mem: [0xe1200000-0xe12fffff]
[ 0.254449] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.254452] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.254499] NET: Registered protocol family 2
[ 0.254624] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.255016] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.255541] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.255878] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.255881] TCP reno registered
[ 0.256025] NET: Registered protocol family 1
[ 0.256134] Trying to unpack rootfs image as initramfs...
[ 0.488538] Freeing initrd memory: 7471k freed
[ 0.492662] cpufreq-nforce2: No nForce2 chipset.
[ 0.492701] Scanning for low memory corruption every 60 seconds
[ 0.492827] audit: initializing netlink socket (disabled)
[ 0.492846] type=2000 audit(1269625461.492:1): initialized
[ 0.501717] Switched to high resolution mode on CPU 1
[ 0.503459] highmem bounce pool size: 64 pages
[ 0.503466] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.504128] Switched to high resolution mode on CPU 0
[ 0.505353] VFS: Disk quotas dquot_6.5.2
[ 0.505430] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.506119] fuse init (API version 7.12)
[ 0.506236] msgmni has been set to 1731
[ 0.506501] alg: No test for stdrng (krng)
[ 0.506518] io scheduler noop registered
[ 0.506521] io scheduler anticipatory registered
[ 0.506523] io scheduler deadline registered
[ 0.506576] io scheduler cfq registered (default)
[ 0.506590] pci 0000:00:02.0: Boot video device
[ 0.506804] alloc irq_desc for 24 on node -1
[ 0.506807] alloc kstat_irqs on node -1
[ 0.506818] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.506828] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.506966] alloc irq_desc for 25 on node -1
[ 0.506969] alloc kstat_irqs on node -1
[ 0.506977] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.506987] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 0.507093] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.507186] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.507352] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.507357] ACPI: Power Button [PWRF]
[ 0.507421] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.507424] ACPI: Power Button [PWRB]
[ 0.507987] ACPI: SSDT 3f5e74c0 0022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.508261] processor LNXCPU:00: registered as cooling_device0
[ 0.508266] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.508503] ACPI: SSDT 3f5e7980 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.508776] processor LNXCPU:01: registered as cooling_device1
[ 0.508787] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 0.510813] isapnp: Scanning for PnP cards...
[ 0.863968] isapnp: No Plug & Play device found
[ 0.865385] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.865502] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.865942] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.867286] brd: module loaded
[ 0.867850] loop: module loaded
[ 0.867938] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.868073] ata_piix 0000:00:1f.2: version 2.13
[ 0.868092] alloc irq_desc for 19 on node -1
[ 0.868095] alloc kstat_irqs on node -1
[ 0.868102] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.868109] ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
[ 0.868151] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.868234] scsi0 : ata_piix
[ 0.868339] scsi1 : ata_piix
[ 0.869219] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 0.869225] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 0.870292] Fixed MDIO Bus: probed
[ 0.870338] PPP generic driver version 2.4.2
[ 0.870451] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.870477] alloc irq_desc for 23 on node -1
[ 0.870483] alloc kstat_irqs on node -1
[ 0.870490] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.870505] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.870509] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.870552] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.870559] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.874468] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.874485] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1384000
[ 0.888047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.888169] usb usb1: configuration #1 chosen from 1 choice
[ 0.888222] hub 1-0:1.0: USB hub found
[ 0.888233] hub 1-0:1.0: 8 ports detected
[ 0.888320] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.888339] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.888372] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.888380] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.888384] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.888421] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.888446] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
[ 0.888547] usb usb2: configuration #1 chosen from 1 choice
[ 0.888580] hub 2-0:1.0: USB hub found
[ 0.888589] hub 2-0:1.0: 2 ports detected
[ 0.888640] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.888647] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.888651] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.888687] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.888718] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
[ 0.888815] usb usb3: configuration #1 chosen from 1 choice
[ 0.888848] hub 3-0:1.0: USB hub found
[ 0.888856] hub 3-0:1.0: 2 ports detected
[ 0.888905] alloc irq_desc for 18 on node -1
[ 0.888907] alloc kstat_irqs on node -1
[ 0.888913] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.888920] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.888924] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.888963] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.888995] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
[ 0.889083] usb usb4: configuration #1 chosen from 1 choice
[ 0.889115] hub 4-0:1.0: USB hub found
[ 0.889124] hub 4-0:1.0: 2 ports detected
[ 0.889174] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.889180] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.889184] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.889226] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.889258] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
[ 0.889346] usb usb5: configuration #1 chosen from 1 choice
[ 0.889378] hub 5-0:1.0: USB hub found
[ 0.889386] hub 5-0:1.0: 2 ports detected
[ 0.889504] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.889506] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.889634] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.889701] mice: PS/2 mouse device common for all mice
[ 0.889826] rtc_cmos 00:04: RTC can wake from S4
[ 0.889866] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.889892] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.890021] device-mapper: uevent: version 1.0.3
[ 0.890142] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.890231] device-mapper: multipath: version 1.1.0 loaded
[ 0.890235] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.890374] EISA: Probing bus 0 at eisa.0
[ 0.890404] EISA: Detected 0 cards.
[ 0.890513] cpuidle: using governor ladder
[ 0.890515] cpuidle: using governor menu
[ 0.891143] TCP cubic registered
[ 0.891335] NET: Registered protocol family 10
[ 0.891902] lo: Disabled Privacy Extensions
[ 0.892335] NET: Registered protocol family 17
[ 0.892360] Bluetooth: L2CAP ver 2.13
[ 0.892362] Bluetooth: L2CAP socket layer initialized
[ 0.892366] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.892368] Bluetooth: SCO socket layer initialized
[ 0.892414] Bluetooth: RFCOMM TTY layer initialized
[ 0.892418] Bluetooth: RFCOMM socket layer initialized
[ 0.892421] Bluetooth: RFCOMM ver 1.11
[ 0.893910] Using IPI No-Shortcut mode
[ 0.894023] PM: Resume from disk failed.
[ 0.894037] registered taskstats version 1
[ 0.894172] Magic number: 2:423:745
[ 0.894252] rtc_cmos 00:04: setting system clock to 2010-03-26 17:44:22 UTC (1269625462)
[ 0.894255] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.894258] EDD information not available.
[ 0.907942] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.080473] ata1.00: ATAPI: _NEC CD-RW NR-7900A, 1.23, max UDMA/33
[ 1.080530] ata1.01: ATAPI: Pioneer DVD-ROM ATAPIModel DVD-106S 0122, E1.22, max UDMA/66
[ 1.096328] ata1.00: configured for UDMA/33
[ 1.112310] ata1.01: configured for UDMA/66
[ 1.200030] usb 1-7: new high speed USB device using ehci_hcd and address 2
[ 1.248212] ata2.00: HPA unlocked: 488395055 -> 488397168, native 488397168
[ 1.248220] ata2.00: ATA-7: ST3250620AS, 3.AAK, max UDMA/133
[ 1.248225] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.292138] ata2.00: configured for UDMA/133
[ 1.334933] usb 1-7: configuration #1 chosen from 1 choice
[ 1.632036] usb 5-2: new low speed USB device using uhci_hcd and address 2
[ 1.816486] usb 5-2: configuration #1 chosen from 1 choice
[ 21.816074] ata1: lost interrupt (Status 0x58)
[ 21.820061] ata1: drained 32768 bytes to clear DRQ.
[ 21.889199] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 21.889210] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 21.889212] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 21.889213] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 21.889217] ata1.00: status: { DRDY }
[ 21.889242] ata1: soft resetting link
[ 22.116337] ata1.00: configured for UDMA/33
[ 22.132310] ata1.01: configured for UDMA/66
[ 22.133521] ata1: EH complete
[ 42.816101] ata1: lost interrupt (Status 0x58)
[ 42.820081] ata1: drained 32768 bytes to clear DRQ.
[ 42.889232] ata1.00: limiting speed to UDMA/25:PIO4
[ 42.889236] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 42.889247] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 42.889249] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 42.889250] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 42.889254] ata1.00: status: { DRDY }
[ 42.889282] ata1: soft resetting link
[ 43.116360] ata1.00: configured for UDMA/25
[ 43.132310] ata1.01: configured for UDMA/66
[ 43.133499] ata1: EH complete
[ 63.816073] ata1: lost interrupt (Status 0x58)
[ 63.888504] ata1: drained 32768 bytes to clear DRQ.
[ 63.889198] ata1.00: limiting speed to PIO4
[ 63.889202] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 63.889212] ata1.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 63.889213] cdb 12 00 00 00 60 00 00 00 00 00 00 00 00 00 00 00
[ 63.889215] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 63.889218] ata1.00: status: { DRDY }
[ 63.889241] ata1: soft resetting link
[ 64.116349] ata1.00: configured for PIO4
[ 64.132310] ata1.01: configured for UDMA/66
[ 64.133485] ata1: EH complete
[ 64.134927] scsi 0:0:0:0: CD-ROM _NEC NR-7900A 1.23 PQ: 0 ANSI: 5
[ 64.138183] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[ 64.138188] Uniform CD-ROM driver Revision: 3.20
[ 64.138329] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 64.138393] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 64.139661] scsi 0:0:1:0: CD-ROM PIONEER DVD-ROM DVD-106 1.22 PQ: 0 ANSI: 5
[ 64.142655] sr1: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray
[ 64.142772] sr 0:0:1:0: Attached scsi CD-ROM sr1
[ 64.142838] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 64.142958] scsi 1:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5
[ 64.143087] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 64.143097] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 64.143147] sd 1:0:0:0: [sda] Write Protect is off
[ 64.143151] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 64.143181] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.143338] sda: sda1 sda2 sda3
[ 64.181383] sd 1:0:0:0: [sda] Attached SCSI disk
[ 64.181403] Freeing unused kernel memory: 544k freed
[ 64.181732] Write protecting the kernel text: 4584k
[ 64.181789] Write protecting the kernel read-only data: 1840k
[ 64.344241] Linux agpgart interface v0.103
[ 64.347724] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[ 64.348185] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[ 64.351678] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 64.363501] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 64.363524] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 64.363565] r8169 0000:02:00.0: setting latency timer to 64
[ 64.363615] alloc irq_desc for 26 on node -1
[ 64.363618] alloc kstat_irqs on node -1
[ 64.363634] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
[ 64.371107] eth0: RTL8168c/8111c at 0xf80ac000, 00:24:1d:90:58:be, XID 3c4000c0 IRQ 26
[ 64.373544] Floppy drive(s): fd0 is 1.44M
[ 64.432147] FDC 0 is a post-1991 82077
[ 64.454219] [drm] Initialized drm 1.1.0 20060810
[ 64.471816] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 64.471850] i915 0000:00:02.0: setting latency timer to 64
[ 64.474475] alloc irq_desc for 27 on node -1
[ 64.474479] alloc kstat_irqs on node -1
[ 64.474491] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 64.478834] usbcore: registered new interface driver hiddev
[ 64.478937] usbcore: registered new interface driver usbhid
[ 64.478940] usbhid: v2.6:USB HID core driver
[ 64.599797] [drm] fb0: inteldrmfb frame buffer device
[ 64.599818] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 64.600438] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.0/input/input4
[ 64.600524] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.3-2/input0
[ 64.668803] [drm] DAC-6: set mode 1920x1200 d
[ 64.692443] microsoft 0003:045E:00F9.0002: fixing up Microsoft Wireless Receiver Model 1028 report descriptor
[ 64.700625] Console: switching to colour frame buffer device 240x75
[ 64.740711] input: Microsft Microsoft Wireless Desktop Receiver 3.1 as /devices/pci0000:00/0000:00:1d.3/usb5/5-2/5-2:1.1/input/input5
[ 64.740833] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on usb-0000:00:1d.3-2/input1
[ 64.993038] PM: Starting manual resume from disk
[ 64.993043] PM: Resume from partition 8:3
[ 64.993046] PM: Checking hibernation image.
[ 64.993222] PM: Resume from disk failed.
[ 65.032225] kjournald starting. Commit interval 5 seconds
[ 65.032241] EXT3-fs: mounted filesystem with ordered data mode.
[ 65.626910] type=1505 audit(1269625527.229:2): operation="profile_load" pid=411 name=/usr/share/gdm/guest-session/Xsession
[ 65.642118] type=1505 audit(1269625527.245:3): operation="profile_load" pid=412 name=/sbin/dhclient3
[ 65.643085] type=1505 audit(1269625527.245:4): operation="profile_load" pid=412 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 65.643572] type=1505 audit(1269625527.245:5): operation="profile_load" pid=412 name=/usr/lib/connman/scripts/dhclient-script
[ 65.675142] type=1505 audit(1269625527.277:6): operation="profile_load" pid=413 name=/usr/bin/evince
[ 65.689771] type=1505 audit(1269625527.293:7): operation="profile_load" pid=413 name=/usr/bin/evince-previewer
[ 65.698371] type=1505 audit(1269625527.301:8): operation="profile_load" pid=413 name=/usr/bin/evince-thumbnailer
[ 65.718801] type=1505 audit(1269625527.321:9): operation="profile_load" pid=415 name=/usr/lib/cups/backend/cups-pdf
[ 65.719854] type=1505 audit(1269625527.321:10): operation="profile_load" pid=415 name=/usr/sbin/cupsd
[ 65.730964] type=1505 audit(1269625527.333:11): operation="profile_load" pid=416 name=/usr/sbin/tcpdump
[ 75.759110] udev: starting version 147
[ 75.779530] Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k
[ 75.881307] intel_rng: FWH not detected
[ 75.965538] EXT3 FS on sda2, internal journal
[ 75.995687] parport_pc 00:09: reported by Plug and Play ACPI
[ 75.995734] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 76.002657] Linux video capture interface: v2.00
[ 76.053699] saa7130/34: v4l2 driver version 0.2.15 loaded
[ 76.053757] saa7134 0000:03:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 76.053765] saa7133[0]: found at 0000:03:01.0, rev: 209, irq: 19, latency: 32, mmio: 0xe1200000
[ 76.053773] saa7133[0]: subsystem: 11bd:002e, board: Pinnacle PCTV 40i/50i/110i (saa7133) [card=77,autodetected]
[ 76.053799] saa7133[0]: board init: gpio is 200c000
[ 76.053805] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 76.064836] lp: driver loaded but no devices found
[ 76.081687] lp0: using parport0 (interrupt-driven).
[ 76.104685] gspca: main v2.6.0 registered
[ 76.105732] gspca: probing 045e:00f4
[ 76.114595] ppdev: user-space parallel port driver
[ 76.126227] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 76.175812] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 76.175843] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 76.205014] saa7133[0]: i2c eeprom 00: bd 11 2e 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 76.205035] saa7133[0]: i2c eeprom 10: ff e0 60 02 ff 20 ff ff ff ff ff ff ff ff ff ff
[ 76.205050] saa7133[0]: i2c eeprom 20: 01 2c 01 23 23 01 04 30 98 ff 00 e2 ff 22 00 c2
[ 76.205064] saa7133[0]: i2c eeprom 30: 96 ff 03 30 15 01 ff 15 0e 6c a3 ea 03 c1 61 13
[ 76.205078] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205133] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205148] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205162] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205176] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205194] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205208] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205222] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205236] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205250] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205265] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205282] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 76.205299] i2c-adapter i2c-1: Invalid 7-bit address 0x7a
[ 76.228252] sn9c20x: OV9650 sensor detected
[ 76.228333] gspca: probe ok
[ 76.228346] gspca: probing 045e:00f4
[ 76.228357] gspca: probing 045e:00f4
[ 76.228383] usbcore: registered new interface driver sn9c20x
[ 76.228387] sn9c20x: registered
[ 76.246146] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 76.264622] tuner 1-004b: chip found @ 0x96 (saa7133[0])
[ 76.365263] tda829x 1-004b: setting tuner address to 61
[ 76.460516] tda829x 1-004b: type set to tda8290+75a
[ 76.461005] 2:2:1: cannot get freq at ep 0x84
[ 76.492241] usbcore: registered new interface driver snd-usb-audio
[ 76.531469] r8169: eth0: link up
[ 76.531476] r8169: eth0: link up
[ 76.594943] type=1505 audit(1269618338.197:12): operation="profile_replace" pid=936 name=/usr/share/gdm/guest-session/Xsession
[ 76.597119] type=1505 audit(1269618338.201:13): operation="profile_replace" pid=937 name=/sbin/dhclient3
[ 76.598025] type=1505 audit(1269618338.201:14): operation="profile_replace" pid=937 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 76.598513] type=1505 audit(1269618338.201:15): operation="profile_replace" pid=937 name=/usr/lib/connman/scripts/dhclient-script
[ 76.603694] type=1505 audit(1269618338.205:16): operation="profile_replace" pid=938 name=/usr/bin/evince
[ 76.619382] type=1505 audit(1269618338.221:17): operation="profile_replace" pid=938 name=/usr/bin/evince-previewer
[ 76.628092] type=1505 audit(1269618338.233:18): operation="profile_replace" pid=938 name=/usr/bin/evince-thumbnailer
[ 76.639701] type=1505 audit(1269618338.241:19): operation="profile_replace" pid=940 name=/usr/lib/cups/backend/cups-pdf
[ 76.640772] type=1505 audit(1269618338.245:20): operation="profile_replace" pid=940 name=/usr/sbin/cupsd
[ 76.644065] type=1505 audit(1269618338.249:21): operation="profile_replace" pid=942 name=/usr/sbin/tcpdump
[ 77.944174] CPU0 attaching NULL sched-domain.
[ 77.944181] CPU1 attaching NULL sched-domain.
[ 77.960571] CPU0 attaching sched-domain:
[ 77.960576] domain 0: span 0-1 level MC
[ 77.960579] groups: 0 1
[ 77.960585] domain 1: span 0-1 level CPU
[ 77.960589] groups: 0-1 (__cpu_power = 2048)
[ 77.960596] CPU1 attaching sched-domain:
[ 77.960599] domain 0: span 0-1 level MC
[ 77.960602] groups: 1 0
[ 77.960607] domain 1: span 0-1 level CPU
[ 77.960610] groups: 0-1 (__cpu_power = 2048)
[ 79.087222] CPU0 attaching NULL sched-domain.
[ 79.087230] CPU1 attaching NULL sched-domain.
[ 79.104089] CPU0 attaching sched-domain:
[ 79.104094] domain 0: span 0-1 level MC
[ 79.104097] groups: 0 1
[ 79.104105] CPU1 attaching sched-domain:
[ 79.104107] domain 0: span 0-1 level MC
[ 79.104111] groups: 1 0
[ 80.717070] input: i2c IR (Pinnacle PCTV) as /devices/virtual/input/input7
[ 80.717219] ir-kbd-i2c: i2c IR (Pinnacle PCTV) detected at i2c-1/1-0047/ir0 [saa7133[0]]
[ 80.780604] saa7133[0]: registered device video1 [v4l2]
[ 80.780646] saa7133[0]: registered device vbi0
[ 80.780679] saa7133[0]: registered device radio0
[ 80.786864] saa7134 ALSA driver for DMA sound loaded
[ 80.786879] IRQ 19/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs
[ 80.786906] saa7133[0]/alsa: saa7133[0] at 0xe1200000 irq 19 registered as card -2
[ 80.788448] alloc irq_desc for 20 on node -1
[ 80.788452] alloc kstat_irqs on node -1
[ 80.788462] CA0106 0000:03:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 80.788497] snd-ca0106: Model 100a Rev 00000000 Serial 100a1102
[ 81.227642] 2:2:1: cannot get freq at ep 0x84
[ 81.358350] 2:2:1: cannot get freq at ep 0x84
[ 86.896035] eth0: no IPv6 routers present
[ 96.598041] 2:2:1: cannot get freq at ep 0x84
[ 96.727739] 2:2:1: cannot get freq at ep 0x84
[ 812.012611] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[ 812.120529] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[ 1088.192538] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[ 1088.300540] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[ 1158.068536] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[ 1158.185194] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[ 1173.205160] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[ 1173.312524] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[ 1554.888521] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[ 1554.996540] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[ 2443.448551] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[ 2443.556612] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[ 4615.960030] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[ 4616.068017] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[ 4636.836020] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[ 4636.944517] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[ 6815.949756] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[ 6816.056022] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[ 6876.516523] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[ 6876.628519] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[ 7588.000440] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 7588.000457] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[ 7588.000459] cdb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7588.000461] res 51/24:03:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
[ 7588.000467] ata1.00: status: { DRDY ERR }
[ 7588.000500] ata1: soft resetting link
[ 7588.232384] ata1.00: configured for PIO4
[ 7588.244311] ata1.01: configured for UDMA/66
[ 7588.245519] ata1: EH complete
[ 9976.892018] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[ 9977.000022] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[10067.100524] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[10067.208023] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[10189.053353] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[10189.161172] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[11344.428524] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[11344.536521] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[11393.224018] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[11393.332016] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[11991.644515] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[11991.752016] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[13131.164017] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[13131.272025] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[13289.592025] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[13289.700519] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[13304.640527] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[13304.748516] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[13649.416519] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[13649.524017] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[14234.928017] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[14235.036518] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[14336.224524] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[14336.332017] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[14688.840019] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[14688.948014] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[14955.248572] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[14955.357273] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[15544.956018] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=1
[15545.064521] i2c IR (Pinnacle PCTV): unknown key: key=0x35 raw=0x35 down=0
[15591.752017] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[15591.860016] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0
[16525.016017] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=1
[16525.124538] i2c IR (Pinnacle PCTV): unknown key: key=0x64 raw=0x64 down=0

konnosl@konnosl-desktop:~$ lsmod
Module Size Used by
saa7134_alsa 12160 1
ir_kbd_i2c 6700 0
binfmt_misc 8356 1
tda827x 9920 1
snd_usb_audio 84224 1
snd_usb_lib 16284 1 snd_usb_audio
snd_hda_codec_realtek 203328 1
tda8290 12960 1
tuner 21540 1
snd_hda_intel 26920 2
snd_hda_codec 75708 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 7200 2 snd_usb_audio,snd_hda_codec
snd_seq_dummy 2656 0
snd_seq_oss 28576 0
iptable_filter 3100 0
snd_ca0106 34240 1
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
ppdev 6688 0
snd_seq_midi 6464 0
gspca_sn9c20x 28188 0
gspca_main 22812 1 gspca_sn9c20x
snd_rawmidi 22176 3 snd_usb_lib,snd_ca0106,snd_seq_midi
snd_ac97_codec 101216 1 snd_ca0106
ac97_bus 1532 1 snd_ac97_codec
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_pcm_oss 37920 0
joydev 10240 0
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
lp 8964 0
saa7134 153320 1 saa7134_alsa
ir_common 48512 2 ir_kbd_i2c,saa7134
v4l2_common 17500 2 tuner,saa7134
videodev 36736 4 tuner,gspca_main,saa7134,v4l2_common
v4l1_compat 14336 1 videodev
videobuf_dma_sg 12544 2 saa7134_alsa,saa7134
parport_pc 31940 1
snd_mixer_oss 16028 1 snd_pcm_oss
parport 35340 3 ppdev,lp,parport_pc
snd_pcm 75296 7 saa7134_alsa,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_ca0106,snd_ac97_codec,snd_pcm_oss
videobuf_core 17952 2 saa7134,videobuf_dma_sg
tveeprom 11872 1 saa7134
snd_timer 22276 2 snd_seq,snd_pcm
snd 59204 26 saa7134_alsa,snd_usb_audio,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_oss,snd_ca0106,snd_rawmidi,snd_ac97_codec,snd_pcm_oss,snd_seq,snd_seq_device,snd_mixer_oss,snd_pcm,snd_timer
soundcore 7264 1 snd
snd_page_alloc 9156 3 snd_hda_intel,snd_ca0106,snd_pcm
fbcon 36640 72
tileblit 2460 1 fbcon
font 8124 1 fbcon
bitblit 5372 1 fbcon
softcursor 1756 1 bitblit
hid_microsoft 3328 0
usbhid 38208 0
i915 226120 3
drm 160032 3 i915
i2c_algo_bit 5760 1 i915
floppy 54916 0
r8169 32064 0
mii 5212 1 r8169
intel_agp 27676 2 i915
agpgart 34988 2 drm,intel_agp
video 19380 1 i915
output 2780 1 video



[logari81]

Πάω εκεί που λέει open media ->capture device και στο όνομα συσκευής βίντεο βάζω το όνομα της κάρτας όπως μου το βγάζει απο το τερματικό δηλαδή: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder(αν και η κάρτα μου είναι η Pinnacle PCTV 110i), και όπου λέει όνομα ηχητικής συσκευής βάζω: Creative Labs CA0106 Soundblaster(επίσης απο το τερματικό), στις επιλογές βάζω PAL και μόλις πατάω play και μου βγάζει τα εξής: Your input can't be opened:
VLC is unable to open the MRL 'v4l2://Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder'. Check the log for details.

Το ονομα της συσκευης που πρεπει να βαλεις ειναι /dev/video1

[ 80.780604] saa7133[0]: registered device video1 [v4l2]

Γενικα επειδη βλεπω οτι εχεις και μια webcam πανω μαλλον η webacam αντιστοιχει στο /dev/video0. Αλλα καλό ειναι όταν εχεις προβλημα να μην μπλεκεις πολλες συσκευες μαζι.

[konnos.l]

Τώρα που βάζω την συσκευή που μου λές μου βγάζει πρόβλημα με τον ήχο. Μήπως πρέπει να βάλω κάτι άλλο και στον ήχο;;; Επίσης μου βγάζει μια μαύρη οθόνη το vlc αλλά και πάλι δεν παίζει η tv. Πρέπει να κάνω κάποια ρύθμιση άλλη;

[logari81]

Δοκιμασε καλυτερα με το tvtime. Αν δυσκολευεσαι να ρυθμισεις στο tvtime την πηγη ως /dev/video1 ή αποσυνδεσε την καμερα ώστε η καρτα τηλεόρασης να παρει την πρωτη θεση (/dev/video0) ή ξεκινησε το tvtime με την εντολή

Κώδικας: Επιλογή όλων

tvtime --device=/dev/video1

[ubuntunoid]

Yπάρχει ένα πακέτο στο 9.10 το linux-firmware-nonfree 1.2.2 που ενεργοποιεί τέτοιου τύπου συσκευές. Εγκατέστησε το κάνε επανεκκίνηση ( χρειάζεται αν εγκαθιστας πράγματα στον πυρήνα) και μετά δοκίμασε με το tvtime αν πιάνεις εικόνα

[konnos.l]

Δοκιμασε καλυτερα με το tvtime. Αν δυσκολευεσαι να ρυθμισεις στο tvtime την πηγη ως /dev/video1 ή αποσυνδεσε την καμερα ώστε η καρτα τηλεόρασης να παρει την πρωτη θεση (/dev/video0) ή ξεκινησε το tvtime με την εντολή

Κώδικας: Επιλογή όλων

tvtime --device=/dev/video1

Το ανοίγω και με τους 2 τρόπους που μου είπες και πάλι δεν έχει σήμα. Τώρα μου βγάζει αυτά

Κώδικας: Επιλογή όλων

konnosl@konnosl-desktop:~$ tvtime --device=/dev/video0
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/konnosl/.tvtime/tvtime.xml
/home/konnosl/.tvtime/stationlist.xml: No existing PAL station list "custom".
videoinput: Cannot open capture device /dev/video0: No such file or directory
tvtime --device=/dev/video1
Thank you for using tvtime.
konnosl@konnosl-desktop:~$ tvtime --device=/dev/video1
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/konnosl/.tvtime/tvtime.xml
/home/konnosl/.tvtime/stationlist.xml: No existing PAL station list "custom".


Yπάρχει ένα πακέτο στο 9.10 το linux-firmware-nonfree 1.2.2 που ενεργοποιεί τέτοιου τύπου συσκευές. Εγκατέστησε το κάνε επανεκκίνηση ( χρειάζεται αν εγκαθιστας πράγματα στον πυρήνα) και μετά δοκίμασε με το tvtime αν πιάνεις εικόνα

Μπορείς να μου δώσεις κάποιο link γιατι δεν βρίσκω κάτι τέτοιο από το synaptic;;;

[logari81]

Yπάρχει ένα πακέτο στο 9.10 το linux-firmware-nonfree 1.2.2 που ενεργοποιεί τέτοιου τύπου συσκευές. Εγκατέστησε το κάνε επανεκκίνηση ( χρειάζεται αν εγκαθιστας πράγματα στον πυρήνα) και μετά δοκίμασε με το tvtime αν πιάνεις εικόνα

αυτο πως το συμπεραινεις; Στο dmesg του δεν αναφερεται τίποτα για missing firmware. Καλύτερα να μην δινουμε συμβουλες αν δεν ειμαστε απόλυτα σιγουροι για αυτο που λεμε. Ή τουλαχιστον να μην το παρουσιαζουμε τόσο απόλυτα όπως το παρουσιαζεις εσυ στο ποστ σου. Δεν υπαρχει καποιο είδος μαγικου φίλτρου για "τέτοιου τύπου συσκευές" . Η νορμαλ περίπτωση ειναι τετοιου ειδους συσκευες απλώς να δουλευουν χωρις να κανουμε τιποτα.

[konnos.l]

εμένα που δεν δουλεύει τι πρέπει να κάνω; στα windows παρεπιπτόντως δουλεύει μια χαρά οπότε δεν είναι θέμα hardware