Εγκατάσταση και λειτουργία Terratec t Stick MKII usb tvtuner

[neofix]

Ολα καλά και ωραία με το linux kai to ubuntu αλλα τα εχω πάρει στο κρανίο με την εγκατάσταση drivers, addons και λοιπά... Εχω πάρει το ενλογω usb tv tuner και δε μπορώ με τίποτα να το κανω να λειτουργήσει. Εχω ακολουθήσει τις οδηγίες απο εδω http://ubuntuforums.org/archive/index.p ... 44535.html (το τελευταίο ποστ)αλλα τίποτα! Μπορεί κανείς να με βοηθήσει; Εχω εγκαταστήσει το kaffeine, MythTV και το TVtime, σε κανενα δε μου το αναγνωρίζει.
Στο lsusb που δινω μου βγαζει τα εξης:

Bus 008 Device 002: ID 045e:009d Microsoft Corp.
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 045e:00f7 Microsoft Corp. LifeCam VX-1000
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c521 Logitech, Inc. MX620 Laser Cordless Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 0ccd:0097 TerraTec Electronic GmbH

[logari81]

δωσε μας το αποτέλεσμα του

Κώδικας: Επιλογή όλων

dmesg

[neofix]

Κώδικας: Επιλογή όλων


[ 0.368666] libata version 3.00 loaded.
[ 0.368740] usbcore: registered new interface driver usbfs
[ 0.368752] usbcore: registered new interface driver hub
[ 0.368882] usbcore: registered new device driver usb
[ 0.368919] ACPI: WMI: Mapper loaded
[ 0.368921] PCI: Using ACPI for IRQ routing
[ 0.369108] NetLabel: Initializing
[ 0.369110] NetLabel: domain hash size = 128
[ 0.369111] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.369127] NetLabel: unlabeled traffic allowed by default
[ 0.369163] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.369169] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.380098] Switching to clocksource tsc
[ 0.381880] AppArmor: AppArmor Filesystem Enabled
[ 0.381900] pnp: PnP ACPI init
[ 0.381919] ACPI: bus type pnp registered
[ 0.384694] pnp: PnP ACPI: found 14 devices
[ 0.384697] ACPI: ACPI bus type pnp unregistered
[ 0.384710] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.384718] system 00:06: ioport range 0x290-0x297 has been reserved
[ 0.384724] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.384727] system 00:07: ioport range 0x800-0x87f has been reserved
[ 0.384730] system 00:07: ioport range 0x480-0x4bf has been reserved
[ 0.384733] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.384736] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.384738] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.384741] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved
[ 0.384744] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.384746] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved
[ 0.384749] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved
[ 0.384755] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.384758] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.384763] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.384769] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[ 0.384771] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.384774] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
[ 0.384777] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.389525] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.389528] pci 0000:00:01.0: IO window: disabled
[ 0.389532] pci 0000:00:01.0: MEM window: 0xfc000000-0xfe8fffff
[ 0.389536] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.389540] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.389543] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
[ 0.389548] pci 0000:00:1c.0: MEM window: 0x80000000-0x803fffff
[ 0.389552] pci 0000:00:1c.0: PREFETCH window: 0x000000faf00000-0x000000faffffff
[ 0.389558] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.389561] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
[ 0.389566] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.389570] pci 0000:00:1c.4: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.389576] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.389579] pci 0000:00:1c.5: IO window: 0x2000-0x2fff
[ 0.389584] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.389587] pci 0000:00:1c.5: PREFETCH window: 0x00000080600000-0x000000807fffff
[ 0.389594] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.389596] pci 0000:00:1e.0: IO window: 0xe000-0xefff
[ 0.389601] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.389605] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.389622] alloc irq_desc for 16 on node -1
[ 0.389624] alloc kstat_irqs on node -1
[ 0.389631] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.389636] pci 0000:00:01.0: setting latency timer to 64
[ 0.389643] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.389647] alloc irq_desc for 17 on node -1
[ 0.389648] alloc kstat_irqs on node -1
[ 0.389652] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.389656] pci 0000:00:1c.0: setting latency timer to 64
[ 0.389664] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.389668] pci 0000:00:1c.4: setting latency timer to 64
[ 0.389678] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.389681] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.389686] pci 0000:00:1c.5: setting latency timer to 64
[ 0.389692] pci 0000:00:1e.0: setting latency timer to 64
[ 0.389696] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.389699] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.389701] pci_bus 0000:01: resource 1 mem: [0xfc000000-0xfe8fffff]
[ 0.389703] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.389706] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
[ 0.389708] pci_bus 0000:04: resource 1 mem: [0x80000000-0x803fffff]
[ 0.389710] pci_bus 0000:04: resource 2 pref mem [0xfaf00000-0xfaffffff]
[ 0.389712] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
[ 0.389714] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.389717] pci_bus 0000:03: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.389719] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.389721] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.389723] pci_bus 0000:02: resource 2 pref mem [0x80600000-0x807fffff]
[ 0.389726] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.389728] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.389730] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
[ 0.389732] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.389773] NET: Registered protocol family 2
[ 0.389939] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.390721] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.393003] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.393588] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.393591] TCP reno registered
[ 0.393719] NET: Registered protocol family 1
[ 0.393881] pci 0000:01:00.0: Boot video device
[ 0.394116] Scanning for low memory corruption every 60 seconds
[ 0.394269] audit: initializing netlink socket (disabled)
[ 0.394281] type=2000 audit(1292614136.389:1): initialized
[ 0.403262] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.404578] VFS: Disk quotas dquot_6.5.2
[ 0.404633] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.405210] fuse init (API version 7.13)
[ 0.405288] msgmni has been set to 4000
[ 0.405494] alg: No test for stdrng (krng)
[ 0.405551] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.405554] io scheduler noop registered
[ 0.405556] io scheduler anticipatory registered
[ 0.405558] io scheduler deadline registered
[ 0.405589] io scheduler cfq registered (default)
[ 0.405741] alloc irq_desc for 24 on node -1
[ 0.405743] alloc kstat_irqs on node -1
[ 0.405752] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
[ 0.405759] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.405852] alloc irq_desc for 25 on node -1
[ 0.405854] alloc kstat_irqs on node -1
[ 0.405860] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 0.405868] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.405973] alloc irq_desc for 26 on node -1
[ 0.405974] alloc kstat_irqs on node -1
[ 0.405981] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
[ 0.405988] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.406099] alloc irq_desc for 27 on node -1
[ 0.406101] alloc kstat_irqs on node -1
[ 0.406107] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 0.406114] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.406193] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.406294] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.406424] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.406428] ACPI: Power Button [PWRB]
[ 0.406472] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.406474] ACPI: Power Button [PWRF]
[ 0.407101] ACPI: SSDT 000000007ff8e0d0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.407388] processor LNXCPU:00: registered as cooling_device0
[ 0.407686] ACPI: SSDT 000000007ff8e2f0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.407952] processor LNXCPU:01: registered as cooling_device1
[ 0.411842] Linux agpgart interface v0.103
[ 0.411883] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.411983] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.412300] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.413303] brd: module loaded
[ 0.413752] loop: module loaded
[ 0.413843] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.413946] ata_piix 0000:00:1f.2: version 2.13
[ 0.413963] alloc irq_desc for 22 on node -1
[ 0.413965] alloc kstat_irqs on node -1
[ 0.413972] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.413977] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 0.414026] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.414112] scsi0 : ata_piix
[ 0.414181] scsi1 : ata_piix
[ 0.415623] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
[ 0.415627] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
[ 0.415651] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 0.415655] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.415692] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.415752] scsi2 : ata_piix
[ 0.415808] scsi3 : ata_piix
[ 0.416986] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 22
[ 0.416990] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 22
[ 0.417056] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.417063] pata_acpi 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.417096] pata_acpi 0000:03:00.1: setting latency timer to 64
[ 0.417110] pata_acpi 0000:03:00.1: PCI INT B disabled
[ 0.417379] Fixed MDIO Bus: probed
[ 0.417409] PPP generic driver version 2.4.2
[ 0.417458] tun: Universal TUN/TAP device driver, 1.6
[ 0.417460] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.417552] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.417569] alloc irq_desc for 18 on node -1
[ 0.417571] alloc kstat_irqs on node -1
[ 0.417577] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.417593] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.417597] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.417625] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.417657] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.421541] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.421588] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbfffc00
[ 0.439847] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.439990] usb usb1: configuration #1 chosen from 1 choice
[ 0.440019] hub 1-0:1.0: USB hub found
[ 0.440028] hub 1-0:1.0: 6 ports detected
[ 0.440098] alloc irq_desc for 23 on node -1
[ 0.440101] alloc kstat_irqs on node -1
[ 0.440108] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.440130] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.440133] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.440170] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.440198] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.444090] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.444112] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbfff800
[ 0.459840] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.459972] usb usb2: configuration #1 chosen from 1 choice
[ 0.460003] hub 2-0:1.0: USB hub found
[ 0.460012] hub 2-0:1.0: 6 ports detected
[ 0.460081] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.460099] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.460147] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.460157] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.460160] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.460201] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.460241] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 0.460326] usb usb3: configuration #1 chosen from 1 choice
[ 0.460349] hub 3-0:1.0: USB hub found
[ 0.460355] hub 3-0:1.0: 2 ports detected
[ 0.460403] alloc irq_desc for 21 on node -1
[ 0.460405] alloc kstat_irqs on node -1
[ 0.460413] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.460419] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.460422] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.460452] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.460480] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.460561] usb usb4: configuration #1 chosen from 1 choice
[ 0.460583] hub 4-0:1.0: USB hub found
[ 0.460589] hub 4-0:1.0: 2 ports detected
[ 0.460631] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.460637] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.460640] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.460677] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.460699] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 0.460781] usb usb5: configuration #1 chosen from 1 choice
[ 0.460803] hub 5-0:1.0: USB hub found
[ 0.460809] hub 5-0:1.0: 2 ports detected
[ 0.460855] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.460862] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.460865] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.460897] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.460920] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 0.461008] usb usb6: configuration #1 chosen from 1 choice
[ 0.461035] hub 6-0:1.0: USB hub found
[ 0.461041] hub 6-0:1.0: 2 ports detected
[ 0.461078] alloc irq_desc for 19 on node -1
[ 0.461080] alloc kstat_irqs on node -1
[ 0.461084] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.461089] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.461092] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.461121] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.461150] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 0.461231] usb usb7: configuration #1 chosen from 1 choice
[ 0.461258] hub 7-0:1.0: USB hub found
[ 0.461264] hub 7-0:1.0: 2 ports detected
[ 0.461303] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.461308] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.461311] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.461337] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.461360] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.461440] usb usb8: configuration #1 chosen from 1 choice
[ 0.461463] hub 8-0:1.0: USB hub found
[ 0.461469] hub 8-0:1.0: 2 ports detected
[ 0.461563] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.461565] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.462054] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.462165] mice: PS/2 mouse device common for all mice
[ 0.462271] rtc_cmos 00:03: RTC can wake from S4
[ 0.462311] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.462335] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.462461] device-mapper: uevent: version 1.0.3
[ 0.462582] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.462645] device-mapper: multipath: version 1.1.0 loaded
[ 0.462648] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.462795] cpuidle: using governor ladder
[ 0.462797] cpuidle: using governor menu
[ 0.463123] TCP cubic registered
[ 0.463255] NET: Registered protocol family 10
[ 0.463690] lo: Disabled Privacy Extensions
[ 0.463947] NET: Registered protocol family 17
[ 0.464498] PM: Resume from disk failed.
[ 0.464512] registered taskstats version 1
[ 0.464968] Magic number: 6:257:496
[ 0.465064] rtc_cmos 00:03: setting system clock to 2010-12-17 19:28:57 UTC (1292614137)
[ 0.465067] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.465068] EDD information not available.
[ 0.491986] Freeing initrd memory: 8144k freed
[ 0.760027] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 0.780879] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.791552] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.916088] usb 1-2: configuration #1 chosen from 1 choice
[ 0.940355] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.950367] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.960524] ata1.00: ATAPI: ASUS DRW-2014L1T, 1.00, max UDMA/66
[ 0.961626] ata2.00: ATA-8: WDC WD1001FALS-00E8B0, 05.00K05, max UDMA/133
[ 0.961633] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.000599] ata1.00: configured for UDMA/66
[ 1.001453] scsi 0:0:0:0: CD-ROM ASUS DRW-2014L1T 1.00 PQ: 0 ANSI: 5
[ 1.001667] ata2.00: configured for UDMA/133
[ 1.003563] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.003568] Uniform CD-ROM driver Revision: 3.20
[ 1.003722] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.003770] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.003876] scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 1.003989] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.003991] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.004043] sd 1:0:0:0: [sda] Write Protect is off
[ 1.004046] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.004073] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.004198] sda: sda1 sda2 < sda5 sda6 sda7 >
[ 1.062598] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.062619] Freeing unused kernel memory: 876k freed
[ 1.062969] Write protecting the kernel read-only data: 7696k
[ 1.076972] udev: starting version 151
[ 1.162633] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.162673] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.188942] scsi4 : pata_jmicron
[ 1.193649] scsi5 : pata_jmicron
[ 1.194458] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
[ 1.194461] ata6: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
[ 1.194659] ahci 0000:03:00.0: version 3.0
[ 1.194679] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.207199] atl1 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.207210] atl1 0000:02:00.0: setting latency timer to 64
[ 1.207231] atl1 0000:02:00.0: version 2.1.3
[ 1.211362] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.211368] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.211377] ahci 0000:03:00.0: setting latency timer to 64
[ 1.211551] scsi6 : ahci
[ 1.211638] scsi7 : ahci
[ 1.211735] ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
[ 1.211739] ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
[ 1.373238] ata5.00: ATA-6: WDC WD2000JB-00GVA0, 08.02D08, max UDMA/100
[ 1.373246] ata5.00: 390721968 sectors, multi 0: LBA48
[ 1.404302] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 1.404306] EXT4-fs (sda6): write access will be enabled during recovery
[ 1.413180] ata5.00: configured for UDMA/100
[ 1.413271] scsi 4:0:0:0: Direct-Access ATA WDC WD2000JB-00G 08.0 PQ: 0 ANSI: 5
[ 1.413421] sd 4:0:0:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.413447] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1.413545] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.413548] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.413571] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.413704] sdb:
[ 1.431308] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 1.431841] sdb1
[ 1.432109] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.560099] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.560134] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.586544] usbcore: registered new interface driver hiddev
[ 1.588802] ohci1394 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.589756] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.1/input/input3
[ 1.589851] generic-usb 0003:0CCD:0097.0001: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:1a.7-2/input1
[ 1.589875] usbcore: registered new interface driver usbhid
[ 1.589878] usbhid: v2.6:USB HID core driver
[ 1.621808] usb 4-2: configuration #1 chosen from 1 choice
[ 1.648079] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4
[ 1.648188] generic-usb 0003:046D:C521.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-2/input0
[ 1.652142] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[febf7800-febf7fff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 1.677799] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.1/input/input5
[ 1.677935] generic-usb 0003:046D:C521.0003: input,hiddev96,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.1-2/input1
[ 1.951322] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 2.117546] usb 7-1: configuration #1 chosen from 1 choice
[ 2.400052] usb 8-2: new low speed USB device using uhci_hcd and address 2
[ 2.591837] usb 8-2: configuration #1 chosen from 1 choice
[ 2.611041] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input6
[ 2.611197] microsoft 0003:045E:009D.0004: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.2-2/input0
[ 2.701291] input: Microsoft Microsoft Wireless Optical Desktop® 2.10 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input7
[ 2.701450] microsoft 0003:045E:009D.0005: input,hidraw4: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Desktop® 2.10] on usb-0000:00:1d.2-2/input1
[ 2.980258] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c000100f872]
[ 4.708139] EXT4-fs (sda6): recovery complete
[ 4.708535] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 20.180410] udev: starting version 151
[ 20.211240] Adding 1256440k swap on /dev/sda7. Priority:-1 extents:1 across:1256440k
[ 20.269544] vga16fb: initializing
[ 20.269549] vga16fb: mapped to 0xffff8800000a0000
[ 20.269612] fb0: VGA16 VGA frame buffer device
[ 20.376053] lp: driver loaded but no devices found
[ 20.481039] nvidia: module license 'NVIDIA' taints kernel.
[ 20.481044] Disabling lock debugging due to kernel taint
[ 20.511434] type=1505 audit(1292606957.544:2): operation="profile_load" pid=658 name="/sbin/dhclient3"
[ 20.512058] type=1505 audit(1292606957.544:3): operation="profile_load" pid=658 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 20.512389] type=1505 audit(1292606957.544:4): operation="profile_load" pid=658 name="/usr/lib/connman/scripts/dhclient-script"
[ 20.516247] type=1505 audit(1292606957.544:5): operation="profile_load" pid=681 name="/usr/sbin/ntpd"
[ 21.010130] Console: switching to colour frame buffer device 80x30
[ 21.044919] Linux video capture interface: v2.00
[ 21.044922] WARNING: You're using an experimental version of the V4L stack. As the driver
[ 21.044923] is backported to an older kernel, it doesn't offer enough quality for
[ 21.044924] its usage in production.
[ 21.044925] Use it with care.
[ 21.048412] gspca: main v2.9.0 registered
[ 21.049584] gspca: probing 045e:00f7
[ 21.050396] cfg80211: Calling CRDA to update world regulatory domain
[ 21.054917] sonixj: Sonix chip id: 11
[ 21.057279] input: sonixj as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/input/input8
[ 21.057471] gspca: video0 created
[ 21.057474] gspca: found int in endpoint: 0x83, buffer_len=1, interval=100
[ 21.057495] gspca: 045e:00f7 bad interface 1
[ 21.057504] gspca: 045e:00f7 bad interface 2
[ 21.057554] usbcore: registered new interface driver sonixj
[ 21.057953] sonixj: registered
[ 21.106472] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.106482] nvidia 0000:01:00.0: setting latency timer to 64
[ 21.106487] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.107273] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.24 Thu Apr 22 19:10:14 PDT 2010
[ 21.129429] rt61pci 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 21.142700] phy0: Selected rate control algorithm 'minstrel'
[ 21.143368] Registered led device: rt61pci-phy0::radio
[ 21.143384] Registered led device: rt61pci-phy0::assoc
[ 21.147688] cfg80211: World regulatory domain updated:
[ 21.147692] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.147695] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.147697] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.147700] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.147702] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.147704] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.228308] usbcore: registered new interface driver snd-usb-audio
[ 21.316541] alloc irq_desc for 28 on node -1
[ 21.316545] alloc kstat_irqs on node -1
[ 21.316560] atl1 0000:02:00.0: irq 28 for MSI/MSI-X
[ 21.316620] atl1 0000:02:00.0: eth0 link is up 100 Mbps full duplex
[ 21.319039] type=1505 audit(1292606958.344:6): operation="profile_load" pid=860 name="/usr/share/gdm/guest-session/Xsession"
[ 21.325319] rt61pci 0000:05:02.0: firmware: requesting rt2561s.bin
[ 21.343022] type=1505 audit(1292606958.374:7): operation="profile_replace" pid=863 name="/sbin/dhclient3"
[ 21.343643] type=1505 audit(1292606958.374:8): operation="profile_replace" pid=863 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 21.343979] type=1505 audit(1292606958.374:9): operation="profile_replace" pid=863 name="/usr/lib/connman/scripts/dhclient-script"
[ 21.352988] type=1505 audit(1292606958.384:10): operation="profile_load" pid=871 name="/usr/bin/evince"
[ 21.357158] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 21.357190] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 21.365656] type=1505 audit(1292606958.394:11): operation="profile_load" pid=871 name="/usr/bin/evince-previewer"
[ 21.451977] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 21.482376] hda_codec: ALC883: BIOS auto-probing.
[ 21.484228] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 22.894736] ppdev: user-space parallel port driver
[ 23.048167] CPU0 attaching NULL sched-domain.
[ 23.048174] CPU1 attaching NULL sched-domain.
[ 23.252743] CPU0 attaching sched-domain:
[ 23.252747] domain 0: span 0-1 level MC
[ 23.252749] groups: 0 1
[ 23.252755] CPU1 attaching sched-domain:
[ 23.252757] domain 0: span 0-1 level MC
[ 23.252759] groups: 1 0
[ 25.192356] CPU0 attaching NULL sched-domain.
[ 25.192363] CPU1 attaching NULL sched-domain.
[ 25.250121] CPU0 attaching sched-domain:
[ 25.250124] domain 0: span 0-1 level MC
[ 25.250127] groups: 0 1
[ 25.250133] CPU1 attaching sched-domain:
[ 25.250135] domain 0: span 0-1 level MC
[ 25.250137] groups: 1 0
[ 27.874803] UDF-fs: Partition marked readonly; forcing readonly mount
[ 27.913995] UDF-fs INFO UDF: Mounting volume 'Cinergy I6', timestamp 2009/10/20 14:02 (1078)
[ 31.451356] lo: Disabled Privacy Extensions
[ 31.971372] eth0: no IPv6 routers present



[the_eye]

Δεν έχει βγάλει driver η εταιρία για linux ούτε είναι κάποιο από τα γνωστά chip.
Δεν θα μπορέσεις να δεις εικόνα, αν δεν βγει κάποιος driver.

[logari81]

Δεν έχει βγάλει driver η εταιρία για linux ούτε είναι κάποιο από τα γνωστά chip.
Δεν θα μπορέσεις να δεις εικόνα, αν δεν βγει κάποιος driver.

κι όμως

http://www.linuxtv.org/pipermail/linux- ... 32734.html

γενικά τους drivers στο Linux δεν μας τους δινουν οι εταιρείες, αλλά το ιδιο το Linux. Ο ρολος των εταιρειών είναι απλώς να αναμειχθούν στην ανάπτυξη του Linux είτε δίνοντας πληροφορίες είτε και πληρώνοντας προγραμματιστες.

[the_eye]

Στο λινκ κάποιος έγραψε έναν driver μόνος του και έφτιαξε ένα patch για τον kernel.
Μπορεί να παίζει αλλά δεν θα έλεγα ότι το tvtuner υποστηρίζεται από το linux αυτή τη στιγμή.

[simosx]

Η αναζήτηση στο διαδίκτυο με το USB ID (0CCD:0097) δείχνει
http://linuxtv.org/wiki/index.php/DVB-T_USB_Devices
όπου αναφέρει

Also known as "Cinergy T RC MKII". On this version the outer package says "Cinergy T RC" and a label on the stick itself says "MKII". Support for new tuner TDA18218 [28] is working with 2.6.37-rc6.

Μια λύση είναι να περιμένεις για το Ubuntu 11.04, η άλλη λύση είναι να μεταγλωττίσεις το νέο πυρήνα, μια τρίτη λύση είναι να δοκιμάσεις από τώρα το Natty (δες αν έχει τη σωστή έκδοση του πυρήνα)
και μια τελευταία λύση είναι να μεταγλωττίσεις ο ίδιος το άρθρωμα πυρήνα για τη διανομή σου.

[logari81]

http://kernel.ubuntu.com/~kernel-ppa/mainline/

[xaris2335]

ας κοιτάξει και αυτό

[xaris2335]

ή αν θες δίνεις

Κώδικας: Επιλογή όλων

wget http://linuxtv.org/hg/v4l-dvb/archive/tip.tar.bz2
tar -xjvf v4l-dvb-abd3aac6644e.tar.bz2
cd v4l-dvb-abd3aac6644e
sudo make all

και πιστεύω είσαι οκ