Προβλημα με Memory Stick, Write-Protected

[M.Jackson]

Καλησπέρα.
Εχω ενα προβλημα με το 8GB USB μου, συκεκριμενα σε Windows και Linux ειναι Write-Protected δεν μπροω να το φορμαρω ουτε να διαγραψω αρχεια.
Θα παρω αλλο αλλα αυτο ειναι ξεχωριστο και αν γινται να το φτιαξω.

[medigeek]

Το usb flash το πήρες ως write-protected ή... χάλασε και έγινε έτσι; Μήπως έχει κάποιο «μοχλό» στο πλάϊ;

[M.Jackson]

Οχι το αγορασα και ηταν μια χαρα. Δεν εχει καποιο κουμπι ειναι το USB βραχιολι.
Δεν ξερω πως εγινε. Ιος δεν παιζει παντος γιατι θα ηταν μονο σε Windows το προβλημα.

[medigeek]

Me to dd δοκίμασες;

Κώδικας: Επιλογή όλων

sudo dd if=/dev/zero of=/dev/xda bs=1M

Αντικαθιστάς το xda με τη συσκευή σου (sudo fdisk -l)

[M.Jackson]

Μου επιστρεφει dd: opening `/dev/sdb': Read-only file system

[the_eye]

Δώσε μας ένα dmesg και lsusb αφού το συνδέσεις.

[medigeek]

Χμ.. να υποθέσω ότι το usb flash είναι ntfs; Αν είναι ntfs, κάνε έλεγχο από windows, και χρησιμοποίησε το "safely remove hardware" από τα tray icons: http://ubuntuforums.org/showthread.php?t=1382173&page=2#17
Δοκίμασε έλεγχο μέσω gparted για άλλα filesystems: http://ubuntuforums.org/showthread.php?t=1382173&page=2#18

[M.Jackson]

dmesg:

Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011
[ 0.000000] Command line: root=/dev/disk/by-uuid/4d67c5c0-772e-4089-a16b-3a45cedca1da ro
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fedf800 (usable)
[ 0.000000] BIOS-e820: 000000003fedf800 - 000000003fee0000 (reserved)
[ 0.000000] BIOS-e820: 000000003fee0000 - 000000003fee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee3000 - 000000003fef0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003ff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP Compaq dx2300 Microtower/0A90, BIOS MS7336 1.08 05/25/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x3fedf max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f3f10] f3f10
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fedf000
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003fedf000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fedf000 @ 3fedc000-3fedf000
[ 0.000000] RAMDISK: 37dd9000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000f7e90 00014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 000000003fee3040 0003C (v01 HPQOEM SLIC-BPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 000000003fee30c0 00074 (v01 HPQOEM SLIC-BPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 000000003fee3180 04604 (v01 HPQOEM AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 000000003fee0000 00040
[ 0.000000] ACPI: HPET 000000003fee7900 00038 (v01 HPQOEM SLIC-BPC 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 000000003fee7980 0003C (v01 HPQOEM SLIC-BPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 000000003fee7800 00084 (v01 HPQOEM SLIC-BPC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 000000003fee7a00 0019E (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT 000000003fee7e90 002F1 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fedf000
[ 0.000000] Initmem setup node 0 0000000000000000-000000003fedf000
[ 0.000000] NODE_DATA [000000003fed7000 - 000000003fedbfff]
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003e600000-ffff88003f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fedf
[ 0.000000] On node 0 totalpages: 261742
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3525 pages used for memmap
[ 0.000000] DMA32 zone: 254234 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 3ff00000 (gap: 3ff00000:a0100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003fc00000 s78464 r8192 d23936 u524288
[ 0.000000] pcpu-alloc: s78464 r8192 d23936 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258156
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/4d67c5c0-772e-4089-a16b-3a45cedca1da ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1020368k/1047420k available (4064k kernel code, 452k absent, 26600k reserved, 3304k data, 712k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8388608 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.310 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3992.89 BogoMIPS (lpj=6651033)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003473] Security Framework initialized
[ 0.003481] AppArmor: AppArmor disabled by boot time parameter
[ 0.003613] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004449] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.004835] Mount-cache hash table entries: 256
[ 0.005300] Initializing cgroup subsys cpuacct
[ 0.005339] Initializing cgroup subsys memory
[ 0.005359] Initializing cgroup subsys devices
[ 0.005361] Initializing cgroup subsys freezer
[ 0.005364] Initializing cgroup subsys net_cls
[ 0.005366] Initializing cgroup subsys blkio
[ 0.005426] CPU: Physical Processor ID: 0
[ 0.005428] CPU: Processor Core ID: 0
[ 0.005430] mce: CPU supports 6 MCE banks
[ 0.005439] CPU0: Thermal monitoring enabled (TM2)
[ 0.005443] using mwait in idle threads.
[ 0.007059] ACPI: Core revision 20110413
[ 0.010013] ftrace: allocating 16144 entries in 64 pages
[ 0.013702] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049113] CPU0: Intel(R) Core(TM)2 Duo CPU E4400 @ 2.00GHz stepping 0d
[ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.049997] PEBS disabled due to CPU errata.
[ 0.049997] ... version: 2
[ 0.049997] ... bit width: 40
[ 0.049997] ... generic registers: 2
[ 0.049997] ... value mask: 000000ffffffffff
[ 0.049997] ... max period: 000000007fffffff
[ 0.049997] ... fixed-purpose events: 3
[ 0.049997] ... event mask: 0000000700000003
[ 0.066818] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.093342] Booting Node 0, Processors #1
[ 0.093345] smpboot cpu 1: start_ip = 9a000
[ 0.190020] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.196659] Brought up 2 CPUs
[ 0.196662] Total of 2 processors activated (7983.14 BogoMIPS).
[ 0.197788] devtmpfs: initialized
[ 0.197918] PM: Registering ACPI NVS region at 3fee0000 (12288 bytes)
[ 0.200042] print_constraints: dummy:
[ 0.200133] NET: Registered protocol family 16
[ 0.200264] ACPI: bus type pci registered
[ 0.200433] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.200437] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.240548] PCI: Using configuration type 1 for base access
[ 0.240988] bio: create slab <bio-0> at 0
[ 0.240988] ACPI: EC: Look up EC in DSDT
[ 0.245119] ACPI: SSDT 000000003fee7e00 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.245330] ACPI: Dynamic OEM Table Load:
[ 0.245333] ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.245470] ACPI: Interpreter enabled
[ 0.245474] ACPI: (supports S0 S3 S4 S5)
[ 0.245492] ACPI: Using IOAPIC for interrupt routing
[ 0.249511] ACPI: No dock devices found.
[ 0.249514] HEST: Table not found.
[ 0.249517] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.249570] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.249687] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.249690] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.249693] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.249696] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.249698] pci_root PNP0A08:00: host bridge window [mem 0x3ff00000-0xfebfffff] (ignored)
[ 0.249710] pci 0000:00:00.0: [8086:2970] type 0 class 0x000600
[ 0.249756] pci 0000:00:01.0: [8086:2971] type 1 class 0x000604
[ 0.249791] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.249795] pci 0000:00:01.0: PME# disabled
[ 0.249840] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.249856] pci 0000:00:1b.0: reg 10: [mem 0xfdff8000-0xfdffbfff 64bit]
[ 0.249911] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.249915] pci 0000:00:1b.0: PME# disabled
[ 0.249934] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.249975] pci 0000:00:1d.0: reg 20: [io 0xff00-0xff1f]
[ 0.250011] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.250052] pci 0000:00:1d.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.250082] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.250122] pci 0000:00:1d.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.250152] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.250192] pci 0000:00:1d.3: reg 20: [io 0xfc00-0xfc1f]
[ 0.250229] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.250246] pci 0000:00:1d.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.250312] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.250317] pci 0000:00:1d.7: PME# disabled
[ 0.250334] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.250392] pci 0000:00:1f.0: [8086:27b8] type 0 class 0x000601
[ 0.250475] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0290 (mask 001f)
[ 0.250512] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[ 0.250526] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.250534] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.250543] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.250551] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.250559] pci 0000:00:1f.2: reg 20: [io 0xfb00-0xfb0f]
[ 0.250568] pci 0000:00:1f.2: reg 24: [mem 0xfdffe000-0xfdffe3ff]
[ 0.250591] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.250595] pci 0000:00:1f.2: PME# disabled
[ 0.250608] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.250660] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.250730] pci 0000:01:00.0: [10de:01d1] type 0 class 0x000300
[ 0.250741] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.250752] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.250763] pci 0000:01:00.0: reg 1c: [mem 0xfb000000-0xfbffffff 64bit]
[ 0.250777] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.250805] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.250814] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.250817] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.250821] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.250826] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.250861] pci 0000:02:00.0: [1186:4b01] type 0 class 0x000200
[ 0.250881] pci 0000:02:00.0: reg 10: [mem 0xfddfc000-0xfddfffff]
[ 0.250891] pci 0000:02:00.0: reg 14: [io 0xee00-0xeeff]
[ 0.250935] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.250959] pci 0000:02:00.0: supports D1 D2
[ 0.250961] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.250966] pci 0000:02:00.0: PME# disabled
[ 0.251013] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.251017] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.251021] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.251028] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.251030] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.251033] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.251045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.251154] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.251226] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.251230] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.251232] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.256512] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 12 14 15)
[ 0.256560] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled.
[ 0.256608] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 12 14 15)
[ 0.256662] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 12 14 15)
[ 0.256709] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled.
[ 0.256756] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled.
[ 0.256804] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 12 14 15) *0, disabled.
[ 0.256851] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 12 14 15)
[ 0.256959] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.256962] vgaarb: loaded
[ 0.256964] vgaarb: bridge control possible 0000:01:00.0
[ 0.257058] PCI: Using ACPI for IRQ routing
[ 0.263268] PCI: pci_cache_line_size set to 64 bytes
[ 0.263328] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.263330] reserve RAM buffer: 000000003fedf800 - 000000003fffffff
[ 0.263476] NetLabel: Initializing
[ 0.263478] NetLabel: domain hash size = 128
[ 0.263479] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.263495] NetLabel: unlabeled traffic allowed by default
[ 0.263509] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.263513] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.263518] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.273331] Switching to clocksource hpet
[ 0.276540] Switched to NOHz mode on CPU #0
[ 0.276625] Switched to NOHz mode on CPU #1
[ 0.281027] pnp: PnP ACPI init
[ 0.281049] ACPI: bus type pnp registered
[ 0.281164] pnp 00:00: [bus 00-ff]
[ 0.281167] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.281169] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.281172] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.281174] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.281177] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.281179] pnp 00:00: [mem 0x3ff00000-0xfebfffff window]
[ 0.281246] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.281302] pnp 00:01: [io 0x0010-0x001f]
[ 0.281305] pnp 00:01: [io 0x0022-0x003f]
[ 0.281307] pnp 00:01: [io 0x0044-0x005f]
[ 0.281309] pnp 00:01: [io 0x0062-0x0063]
[ 0.281310] pnp 00:01: [io 0x0065-0x006f]
[ 0.281312] pnp 00:01: [io 0x0074-0x007f]
[ 0.281314] pnp 00:01: [io 0x0091-0x0093]
[ 0.281316] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.281318] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.281320] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.281322] pnp 00:01: [io 0x0290-0x02af]
[ 0.281324] pnp 00:01: [io 0x0290-0x0297]
[ 0.281326] pnp 00:01: [io 0x0880-0x088f]
[ 0.281389] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.281392] system 00:01: [io 0x0290-0x02af] has been reserved
[ 0.281395] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.281398] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.281402] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.281414] pnp 00:02: [dma 4]
[ 0.281416] pnp 00:02: [io 0x0000-0x000f]
[ 0.281418] pnp 00:02: [io 0x0080-0x0090]
[ 0.281420] pnp 00:02: [io 0x0094-0x009f]
[ 0.281422] pnp 00:02: [io 0x00c0-0x00df]
[ 0.281451] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.281502] pnp 00:03: [irq 0 disabled]
[ 0.281515] pnp 00:03: [irq 8]
[ 0.281517] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.281548] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.281575] pnp 00:04: [io 0x0070-0x0073]
[ 0.281610] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.281619] pnp 00:05: [io 0x0061]
[ 0.281649] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.281661] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.281667] pnp 00:06: [irq 13]
[ 0.281697] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.281800] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.281802] pnp 00:07: [io 0x03f7]
[ 0.281807] pnp 00:07: [irq 6]
[ 0.281812] pnp 00:07: [dma 2]
[ 0.281857] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.281997] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.282002] pnp 00:08: [irq 4]
[ 0.282064] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.282223] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.282229] pnp 00:09: [irq 3]
[ 0.282291] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.282581] pnp 00:0a: [io 0x0378-0x037f]
[ 0.282583] pnp 00:0a: [io 0x0778-0x077b]
[ 0.282588] pnp 00:0a: [irq 7]
[ 0.282590] pnp 00:0a: [dma 3]
[ 0.282652] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.282698] pnp 00:0b: [irq 12]
[ 0.282736] pnp 00:0b: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.282760] pnp 00:0c: [io 0x0060]
[ 0.282765] pnp 00:0c: [io 0x0064]
[ 0.282770] pnp 00:0c: [irq 1]
[ 0.282804] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.282836] pnp 00:0d: [io 0x0400-0x04bf]
[ 0.282883] system 00:0d: [io 0x0400-0x04bf] has been reserved
[ 0.282887] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.282905] pnp 00:0e: [mem 0xffb80000-0xffbfffff]
[ 0.282943] pnp 00:0e: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.283120] pnp 00:0f: [mem 0xe0000000-0xefffffff]
[ 0.283180] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.283184] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.283266] pnp 00:10: [mem 0x000f0000-0x000fffff]
[ 0.283269] pnp 00:10: [mem 0x3ff00000-0x3fffffff]
[ 0.283271] pnp 00:10: [mem 0xfed00000-0xfed000ff]
[ 0.283273] pnp 00:10: [mem 0x3fee0000-0x3fefffff]
[ 0.283276] pnp 00:10: [mem 0x00000000-0x0009ffff]
[ 0.283278] pnp 00:10: [mem 0x00100000-0x3fedffff]
[ 0.283280] pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.283283] pnp 00:10: [mem 0xfec00000-0xfec00fff]
[ 0.283285] pnp 00:10: [mem 0xfed13000-0xfed1dfff]
[ 0.283287] pnp 00:10: [mem 0xfed20000-0xfed8ffff]
[ 0.283289] pnp 00:10: [mem 0xfee00000-0xfee00fff]
[ 0.283291] pnp 00:10: [mem 0xffb00000-0xffb7ffff]
[ 0.283293] pnp 00:10: [mem 0xfff00000-0xffffffff]
[ 0.283295] pnp 00:10: [mem 0x000e0000-0x000effff]
[ 0.283376] system 00:10: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.283380] system 00:10: [mem 0x3ff00000-0x3fffffff] could not be reserved
[ 0.283383] system 00:10: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.283386] system 00:10: [mem 0x3fee0000-0x3fefffff] could not be reserved
[ 0.283389] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.283392] system 00:10: [mem 0x00100000-0x3fedffff] could not be reserved
[ 0.283395] system 00:10: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.283398] system 00:10: [mem 0xfed13000-0xfed1dfff] has been reserved
[ 0.283401] system 00:10: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.283404] system 00:10: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.283406] system 00:10: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.283409] system 00:10: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.283412] system 00:10: [mem 0x000e0000-0x000effff] has been reserved
[ 0.283416] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.283423] pnp: PnP ACPI: found 17 devices
[ 0.283425] ACPI: ACPI bus type pnp unregistered
[ 0.289850] PCI: max bus depth: 1 pci_try_num: 2
[ 0.289873] pci 0000:01:00.0: BAR 6: assigned [mem 0xfc000000-0xfc01ffff pref]
[ 0.289877] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.289880] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.289884] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfcffffff]
[ 0.289888] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.289894] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
[ 0.289896] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.289900] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.289905] pci 0000:00:1e.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.289909] pci 0000:00:1e.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.289924] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.289929] pci 0000:00:01.0: setting latency timer to 64
[ 0.289936] pci 0000:00:1e.0: setting latency timer to 64
[ 0.289940] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.289942] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.289945] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.289948] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfcffffff]
[ 0.289950] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.289953] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.289955] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.289958] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[ 0.289961] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.289963] pci_bus 0000:02: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.290059] NET: Registered protocol family 2
[ 0.290216] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.290760] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 0.291893] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.292671] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.292674] TCP reno registered
[ 0.292684] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.292700] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.293034] NET: Registered protocol family 1
[ 0.293171] pci 0000:01:00.0: Boot video device
[ 0.293177] PCI: CLS 64 bytes, default 64
[ 0.293244] Unpacking initramfs...
[ 0.327644] Freeing initrd memory: 2140k freed
[ 0.329070] audit: initializing netlink socket (disabled)
[ 0.329086] type=2000 audit(1314865788.326:1): initialized
[ 0.333171] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.341459] VFS: Disk quotas dquot_6.5.2
[ 0.341621] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.341810] msgmni has been set to 1997
[ 0.342052] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.342090] io scheduler noop registered
[ 0.342092] io scheduler deadline registered
[ 0.342145] io scheduler cfq registered (default)
[ 0.342256] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.342288] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.342440] intel_idle: MWAIT substates: 0x220
[ 0.342442] intel_idle: does not run on family 6 model 15
[ 0.342448] ERST: Table is not found!
[ 0.342517] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.363033] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.393827] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.557327] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.617212] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.656924] Linux agpgart interface v0.103
[ 0.657032] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.659825] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.659860] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.659952] mousedev: PS/2 mouse device common for all mice
[ 0.660035] rtc_cmos 00:04: RTC can wake from S4
[ 0.660130] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.660153] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.660167] cpuidle: using governor ladder
[ 0.660169] cpuidle: using governor menu
[ 0.660417] TCP cubic registered
[ 0.660420] NET: Registered protocol family 17
[ 0.660429] Registering the dns_resolver key type
[ 0.660531] PM: Hibernation image not present or could not be loaded.
[ 0.660538] registered taskstats version 1
[ 0.663926] rtc_cmos 00:04: setting system clock to 2011-09-01 08:29:49 UTC (1314865789)
[ 0.663998] Initializing network drop monitor service
[ 0.665477] Freeing unused kernel memory: 712k freed
[ 0.665676] Write protecting the kernel read-only data: 6144k
[ 0.665815] Freeing unused kernel memory: 12k freed
[ 0.668778] Freeing unused kernel memory: 776k freed
[ 0.680851] udevd[48]: starting version 173
[ 0.682751] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.728819] usbcore: registered new interface driver usbfs
[ 0.728856] usbcore: registered new interface driver hub
[ 0.730844] SCSI subsystem initialized
[ 0.731318] usbcore: registered new device driver usb
[ 0.750576] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.752637] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.752667] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.752671] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.752735] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.752771] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.759085] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.759110] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000
[ 0.768032] libata version 3.00 loaded.
[ 0.770930] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.771110] hub 1-0:1.0: USB hub found
[ 0.771115] hub 1-0:1.0: 8 ports detected
[ 0.771458] ata_piix 0000:00:1f.2: version 2.13
[ 0.771483] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.771489] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.771534] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.773601] scsi0 : ata_piix
[ 0.775163] scsi1 : ata_piix
[ 0.775671] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
[ 0.775675] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
[ 0.780571] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.780641] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.780653] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.780657] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.780678] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.780708] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00
[ 0.780875] hub 2-0:1.0: USB hub found
[ 0.780880] hub 2-0:1.0: 2 ports detected
[ 0.780953] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.780959] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.780962] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.780970] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.781006] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00
[ 0.781138] hub 3-0:1.0: USB hub found
[ 0.781142] hub 3-0:1.0: 2 ports detected
[ 0.781212] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.781218] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.781221] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.781229] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.781259] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00
[ 0.781396] hub 4-0:1.0: USB hub found
[ 0.781400] hub 4-0:1.0: 2 ports detected
[ 0.781466] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.781472] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.781475] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.781483] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.781514] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00
[ 0.781641] hub 5-0:1.0: USB hub found
[ 0.781645] hub 5-0:1.0: 2 ports detected
[ 0.926977] ata2.01: NODEV after polling detection
[ 0.933463] ata1.00: ATA-7: ST3160815AS, 3.CHF, max UDMA/100
[ 0.933467] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.946792] ata1.00: configured for UDMA/100
[ 0.946987] scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.CH PQ: 0 ANSI: 5
[ 0.950126] ata2.00: ATAPI: ATAPI DVD A DH16A1L, KH37, max UDMA/100
[ 0.980121] ata2.00: configured for UDMA/100
[ 0.982045] scsi 1:0:0:0: CD-ROM ATAPI DVD A DH16A1L KH37 PQ: 0 ANSI: 5
[ 0.987903] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.987958] sd 0:0:0:0: [sda] Write Protect is off
[ 0.987962] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.987984] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.991466] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.991470] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.991774] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.996455] sda: sda1 sda2 sda3 sda4
[ 0.996839] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.330014] Refined TSC clocksource calibration: 1994.999 MHz.
[ 1.330020] Switching to clocksource tsc
[ 1.539131] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.862064] udevd[236]: starting version 173
[ 3.058137] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 3.058145] ACPI: Power Button [PWRB]
[ 3.058231] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.058235] ACPI: Power Button [PWRF]
[ 3.124294] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.130581] intel_rng: FWH not detected
[ 3.174952] skge 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.174995] skge: 1.13 addr 0xfddfc000 irq 16 chip Yukon-Lite rev 9
[ 3.175390] skge 0000:02:00.0: eth0: addr 00:26:5a:79:ec:31
[ 3.203559] leds_ss4200: no LED devices found
[ 3.228657] ACPI: acpi_idle registered with cpuidle
[ 3.229522] Floppy drive(s): fd0 is 1.44M
[ 3.247165] FDC 0 is a post-1991 82077
[ 3.253868] wmi: Mapper loaded
[ 3.278804] parport_pc 00:0a: reported by Plug and Play ACPI
[ 3.278858] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 3.317711] [drm] Initialized drm 1.1.0 20060810
[ 3.337316] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.337392] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 3.337419] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 3.368360] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.369381] nouveau 0000:01:00.0: setting latency timer to 64
[ 3.371546] [drm] nouveau 0000:01:00.0: Detected an NV40 generation card (0x046100a3)
[ 3.375199] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 3.452749] ppdev: user-space parallel port driver
[ 3.455936] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 3.455940] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 3.455944] [drm] nouveau 0000:01:00.0: Bios version 05.72.22.43
[ 3.455948] [drm] nouveau 0000:01:00.0: TMDS table version 1.1
[ 3.455950] [drm] nouveau 0000:01:00.0: TMDS table script pointers not stubbed
[ 3.455952] [drm] nouveau 0000:01:00.0: BIT table 'd' not found
[ 3.455955] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 3.0
[ 3.455958] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000300 00000028
[ 3.455961] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011310 00000028
[ 3.455964] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 01011312 00000000
[ 3.455966] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 020223f1 00c0c083
[ 3.455970] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x30 5 10 2
[ 3.455973] [drm] nouveau 0000:01:00.0: 0: 0x00000000: type 0x00 idx 0 tag 0xff
[ 3.455976] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 3.455979] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 3.455982] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 3.455985] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 3.455992] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xE0F0
[ 3.456042] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE41F
[ 3.471341] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE9BD
[ 3.471361] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEB38
[ 3.472488] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xED91
[ 3.472495] [drm] nouveau 0000:01:00.0: timingset 255 does not exist
[ 3.492208] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 3.492212] [drm] nouveau 0000:01:00.0: 0: memory 600MHz core 450MHz fanspeed 100%
[ 3.492220] [drm] nouveau 0000:01:00.0: c: memory 391MHz core 199MHz
[ 3.492303] [TTM] Zone kernel: Available graphics memory: 512004 kiB.
[ 3.492305] [TTM] Initializing pool allocator.
[ 3.492328] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM
[ 3.499846] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 3.499961] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 3.537639] hda_codec: ALC888: BIOS auto-probing.
[ 3.537644] hda_codec: ALC888: SKU not ready 0x411111f0
[ 3.538802] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 3.541949] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 3.564152] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.564155] [drm] No driver support for vblank timestamp query.
[ 3.565013] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 3.565017] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 1)
[ 3.565020] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on tmds encoder (output 2)
[ 3.565023] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 3)
[ 3.583817] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.594344] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.594408] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.619974] iTCO_vendor_support: vendor-support=0
[ 3.626848] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 3.626942] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[ 3.627088] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.754502] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88003ceddc00
[ 3.754569] fbcon: nouveaufb (fb0) is primary device
[ 3.766016] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 3.766020] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output A
[ 3.768497] Console: switching to colour frame buffer device 160x64
[ 3.771254] fb0: nouveaufb frame buffer device
[ 3.771256] drm: registered panic notifier
[ 3.771263] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 3.968297] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 5.281029] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 5.641522] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 5.747819] Adding 2104508k swap on /dev/sda2. Priority:-1 extents:1 across:2104508k
[ 7.192542] skge 0000:02:00.0: eth0: enabling interface
[ 9.108765] skge 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control none
[ 65.778323] EXT4-fs (sda3): re-mounted. Opts: commit=0
[ 66.404108] EXT4-fs (sda4): re-mounted. Opts: commit=0
[ 78.928704] NET: Registered protocol family 10
[ 83.796052] fuse init (API version 7.16)
[ 89.496669] eth0: no IPv6 routers present
[ 990.483634] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[ 1290.494264] [drm] nouveau 0000:01:00.0: Setting dpms mode 2 on vga encoder (output 0)
[ 1590.493251] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 4518.471046] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 8481.662517] usb 1-4: new high speed USB device number 2 using ehci_hcd
[ 8482.045163] usbcore: registered new interface driver uas
[ 8482.047963] Initializing USB Mass Storage driver...
[ 8482.048075] scsi2 : usb-storage 1-4:1.0
[ 8482.048177] usbcore: registered new interface driver usb-storage
[ 8482.048179] USB Mass Storage support registered.
[ 8483.046653] scsi 2:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2
[ 8483.046880] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 8483.049139] sd 2:0:0:0: [sdb] 16547840 512-byte logical blocks: (8.47 GB/7.89 GiB)
[ 8483.049893] sd 2:0:0:0: [sdb] Write Protect is off
[ 8483.049898] sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 8483.050386] sd 2:0:0:0: [sdb] No Caching mode page present
[ 8483.050390] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8483.053139] sd 2:0:0:0: [sdb] No Caching mode page present
[ 8483.053145] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8483.233787] sdb: sdb1
[ 8483.236913] sd 2:0:0:0: [sdb] Write Protect is on
[ 8483.236917] sd 2:0:0:0: [sdb] Mode Sense: 03 00 80 00
[ 8483.237381] sd 2:0:0:0: [sdb] No Caching mode page present
[ 8483.237384] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 8483.237388] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[10124.143055] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[10125.363114] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[11584.155990] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[11884.166154] [drm] nouveau 0000:01:00.0: Setting dpms mode 2 on vga encoder (output 0)
[12184.165766] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[15387.904899] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[17739.598336] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[18039.608916] [drm] nouveau 0000:01:00.0: Setting dpms mode 2 on vga encoder (output 0)
[18339.609546] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[20682.605782] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[21371.658372] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[21671.666911] [drm] nouveau 0000:01:00.0: Setting dpms mode 2 on vga encoder (output 0)
[21971.668263] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[23680.044282] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[27831.398943] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[28017.784038] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[29183.370066] [drm] nouveau 0000:01:00.0: Setting dpms mode 1 on vga encoder (output 0)
[29483.379424] [drm] nouveau 0000:01:00.0: Setting dpms mode 2 on vga encoder (output 0)
[29783.379934] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[35798.928158] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[35807.765130] usb 1-4: USB disconnect, device number 2
[36461.143051] usb 1-3: new high speed USB device number 3 using ehci_hcd
[36461.267883] scsi3 : usb-storage 1-3:1.0
[36462.267364] scsi 3:0:0:0: Direct-Access WD My Passport 070A 1032 PQ: 0 ANSI: 4
[36462.267604] sd 3:0:0:0: Attached scsi generic sg2 type 0
[36462.271906] scsi 3:0:0:1: CD-ROM WD Virtual CD 070A 1032 PQ: 0 ANSI: 4
[36462.272229] sd 3:0:0:0: [sdb] 975400960 512-byte logical blocks: (499 GB/465 GiB)
[36462.274621] sd 3:0:0:0: [sdb] Write Protect is off
[36462.274627] sd 3:0:0:0: [sdb] Mode Sense: 23 00 10 00
[36462.276607] sd 3:0:0:0: [sdb] No Caching mode page present
[36462.276612] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[36462.278119] sr1: scsi3-mmc drive: 51x/51x caddy
[36462.278325] sr 3:0:0:1: Attached scsi CD-ROM sr1
[36462.278459] sr 3:0:0:1: Attached scsi generic sg3 type 5
[36462.280049] scsi 3:0:0:2: Enclosure WD SES Device 1032 PQ: 0 ANSI: 4
[36462.280245] scsi 3:0:0:2: Attached scsi generic sg4 type 13
[36462.288086] sd 3:0:0:0: [sdb] No Caching mode page present
[36462.288091] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[36462.297493] sdb: sdb1
[36462.301977] sd 3:0:0:0: [sdb] No Caching mode page present
[36462.301982] sd 3:0:0:0: [sdb] Assuming drive cache: write through
[36462.301985] sd 3:0:0:0: [sdb] Attached SCSI disk
[36462.457158] ses 3:0:0:2: Attached Enclosure device
[36610.376386] usb 1-5: new high speed USB device number 4 using ehci_hcd
[36610.555855] scsi4 : usb-storage 1-5:1.0
[36611.553948] scsi 4:0:0:0: Direct-Access Generic Flash Disk 8.00 PQ: 0 ANSI: 2
[36611.554185] sd 4:0:0:0: Attached scsi generic sg5 type 0
[36611.555769] sd 4:0:0:0: [sdc] 16547840 512-byte logical blocks: (8.47 GB/7.89 GiB)
[36611.556396] sd 4:0:0:0: [sdc] Write Protect is off
[36611.556400] sd 4:0:0:0: [sdc] Mode Sense: 03 00 00 00
[36611.556930] sd 4:0:0:0: [sdc] No Caching mode page present
[36611.556934] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[36611.559300] sd 4:0:0:0: [sdc] No Caching mode page present
[36611.559304] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[36611.740084] sdc: sdc1
[36611.742440] sd 4:0:0:0: [sdc] Write Protect is on
[36611.742444] sd 4:0:0:0: [sdc] Mode Sense: 03 00 80 00
[36611.742932] sd 4:0:0:0: [sdc] No Caching mode page present
[36611.742937] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[36611.742940] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[36756.780083] WARNING! power/level is deprecated; use power/control instead
[36756.852805] usb 1-3: USB disconnect, device number 3

lsub:

Κώδικας: Επιλογή όλων

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0011:7788

medigeek ειναι fat32

[the_eye]

Δες αυτό

Κώδικας: Επιλογή όλων

[36611.742440] sd 4:0:0:0: [sdc] Write Protect is on

Έχει πουθενά κάποιο μικροδιακοπτάκι που λέει lock ή κάτι τέτοιο ;

[medigeek]

Παράξενο που ξεκινάει με write protect off και μετά ενεργοποιείται.
Μάρκα/μοντέλο του usb flash; Δεν το αναγνωρίζει καθόλου το lsusb απ'ό,τι βλέπω. Και το "Generic flash" είναι ανησυχητικό.
- Μήπως είναι πρόβλημα του arch linux και της νέας έκδοσης 3.0;
- Από windows 7 δουλεύει;
- Από ubuntu live cd δουλεύει;
- Δοκίμασε αυτό το formatter (windows): http://eu.apacer.com/support/download/file/973 -- σε μερικά φόρουμ είπαν ότι διορθώνει το πρόβλημα.
Δοκίμασε κι αυτό: http://www.softpedia.com/get/System/Har ... Tool.shtml