Δεν κάνει mount το dvd

...hardware-drivers για περιφερειακά (εκτυπωτές, κάμερες, εξ. σκληροί, κλπ)
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb

Δεν κάνει mount το dvd

Δημοσίευσηαπό anapodos » 16 Σεπ 2012, 09:11

Καλημέρα σε όλη την κοινότητα.
Το πρόβλημα είναι το εξής.
Βάζω το δισκάκι στην μονάδα ακούγεται ότι το διαβάζει αλλά δεν γίνεται προσάρτηση του δίσκου ούτε αυτόματα ούτε από το disk utility.
Το dmesg από την στιγμή που διαβάζει το δίσκο μέχρι να πέσουν οι στροφές δίνει
Κώδικας: Επιλογή όλων
[ 100.603268] IP: [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 100.603275] PGD 4a61c067 PUD 4a61b067 PMD 0
[ 100.603279] Oops: 0000 [#1] SMP
[ 100.603281] last sysfs file: /sys/module/crc_itu_t/initstate
[ 100.603284] CPU 0
[ 100.603285] Modules linked in: udf hidp parport_pc sco rfcomm bnep ppdev l2cap binfmt_misc snd_hda_codec_hdmi snd_hda_codec_analog snd_hda_intel snd_usb_audio fglrx(P) snd_usbmidi_lib snd_hda_codec snd_seq_midi snd_hwdep snd_seq_midi_event snd_rawmidi snd_seq snd_pcm snd_timer uvcvideo snd_seq_device sp5100_tco videodev amd64_edac_mod edac_core edac_mce_amd snd snd_page_alloc asus_atk0110 lp btusb v4l2_compat_ioctl32 bluetooth parport i2c_piix4 k8temp soundcore psmouse serio_raw usbhid hid firewire_ohci firewire_core floppy ahci crc_itu_t skge libahci pata_atiixp
[ 100.603318]
[ 100.603320] Pid: 2298, comm: mount Tainted: P 2.6.38-02063808-generic #201106040910 System manufacturer System Product Name/M2R32-MVP
[ 100.603325] RIP: 0010:[<ffffffff81194c43>] [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 100.603329] RSP: 0018:ffff88004bef3cd8 EFLAGS: 00010206
[ 100.603331] RAX: 0000000000000000 RBX: ffff88007cc27400 RCX: 0000000000000035
[ 100.603332] RDX: 0000000000000000 RSI: ffff88007cc27450 RDI: ffffffff81a02300
[ 100.603334] RBP: ffff88004bef3d18 R08: 0000000000000000 R09: 0000000000000000
[ 100.603336] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88007cc27400
[ 100.603338] R13: ffffffffa05b7000 R14: 0000000000000083 R15: 00000000ffffffe2
[ 100.603340] FS: 00007f4b60f58800(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000
[ 100.603342] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 100.603344] CR2: 0000000000000319 CR3: 000000004bcbd000 CR4: 00000000000006f0
[ 100.603345] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 100.603347] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 100.603349] Process mount (pid: 2298, threadinfo ffff88004bef2000, task ffff88004e555b80)
[ 100.603351] Stack:
[ 100.603352] ffff88004bef3cf8 ffff88007cc27420 0000000000000000 ffff88007cc27400
[ 100.603355] ffffffffa05b7000 0000000000000083 ffff88004beae000 0000000000000000
[ 100.603359] ffff88004bef3d48 ffffffff81194e0d ffff88004bef3d98 ffff880061c3ae00
[ 100.603362] Call Trace:
[ 100.603367] [<ffffffff81194e0d>] blkdev_get_by_path+0x3d/0x90
[ 100.603370] [<ffffffff81164244>] mount_bdev+0x64/0x210
[ 100.603376] [<ffffffffa05b07a0>] ? udf_fill_super+0x0/0x560 [udf]
[ 100.603380] [<ffffffffa05adca5>] udf_mount+0x15/0x20 [udf]
[ 100.603383] [<ffffffff81163489>] vfs_kern_mount+0x89/0x230
[ 100.603385] [<ffffffff81163723>] do_kern_mount+0x53/0xb0
[ 100.603389] [<ffffffff8117fdda>] do_new_mount+0x7a/0xb0
[ 100.603392] [<ffffffff811804a8>] do_mount+0x188/0x1d0
[ 100.603395] [<ffffffff8118057f>] sys_mount+0x8f/0xd0
[ 100.603398] [<ffffffff8100d192>] ? math_state_restore+0x42/0x60
[ 100.603401] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b
[ 100.603402] Code: 0f 85 c8 00 00 00 48 8d 7b 50 48 c7 43 50 00 00 00 00 31 f6 e8 ff 25 ef ff 48 c7 c7 00 23 a0 81 e8 03 41 ea ff 66 90 48 8b 45 d0 <f6> 80 19 03 00 00 01 74 16 45 85 ff 75 11 41 83 e6 02 74 0b 41
[ 100.603430] RIP [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 100.603433] RSP <ffff88004bef3cd8>
[ 100.603435] CR2: 0000000000000319
[ 100.603437] ---[ end trace fd1e43ee018e5ab7 ]---

Η συσκευή δεν έχει κάποιο πρόβλημα γιατί χθες έκανα εγγραφή χωρίς κανένα σφάλμα σε ένα άδειο dvd.
Σε windows δεν υπάρχει κανένα πρόβλημα, διαβάζεται άνετα το δισκάκι οπότε αποκλείω την περίπτωση ελαττωματικού dvd.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-55-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.2.0-54-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 6000+ ‖ RAM 3955 MiB ‖ ASUS INC. M2R32-MVP
4 Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570] [1002:6759] {fglrx_pci}
5 eth0: Marvell 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
anapodos
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 400
Εγγραφή: 04 Δεκ 2008, 02:33
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό Learner » 16 Σεπ 2012, 09:39

Μήπως έχει τίποτα άλλα μηνύματα το dmesg , πιο πριν ; που ίσως να είναι ενδιαφέροντα ;
Κώδικας: Επιλογή όλων
dmesg | grep sr0
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό anapodos » 16 Σεπ 2012, 09:48

Κώδικας: Επιλογή όλων
kostas@kostas-home:~$ dmesg | grep sr0
[ 2.532867] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.532949] sr 5:0:0:0: Attached scsi CD-ROM sr0


Και ολόκληρο
Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-02063808-generic (root@zinc) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #201106040910 SMP Sat Jun 4 09:13:01 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-02063808-generic root=UUID=2ef993f5-b307-4983-9779-44cc76b134f9 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: System manufacturer System Product Name/M2R32-MVP, BIOS 0906 07/13/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x7ffb0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007ffb0000
[ 0.000000] 0000000000 - 007fe00000 page 2M
[ 0.000000] 007fe00000 - 007ffb0000 page 4k
[ 0.000000] kernel direct mapping tables up to 7ffb0000 @ 1fffc000-20000000
[ 0.000000] RAMDISK: 3660e000 - 372ff000
[ 0.000000] Reserving 64MB of memory at 800MB for crashkernel (System RAM: 2047MB)
[ 0.000000] ACPI: RSDP 00000000000fb400 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007ffb0000 0003C (v01 NEC 07000713 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007ffb0200 00084 (v02 A_M_I_ OEMFACP 07000713 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007ffb05b0 07A34 (v01 A0578 A0578000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 000000007ffbe000 00040
[ 0.000000] ACPI: APIC 000000007ffb0390 0005C (v01 A_M_I_ OEMAPIC 07000713 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007ffb03f0 0003C (v01 A_M_I_ OEMMCFG 07000713 MSFT 00000097)
[ 0.000000] ACPI: SLIC 000000007ffb0430 00176 (v01 NEC 07000713 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007ffbe040 00060 (v01 A_M_I_ AMI_OEM 07000713 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007ffb7ff0 00038 (v01 A_M_I_ OEMHPET 07000713 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007ffb0000
[ 0.000000] Initmem setup node 0 0000000000000000-000000007ffb0000
[ 0.000000] NODE_DATA [000000007ffab000 - 000000007ffaffff]
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff88007d600000-ffff88007f1fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007ffb0
[ 0.000000] On node 0 totalpages: 524095
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3921 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7111 pages used for memmap
[ 0.000000] DMA32 zone: 513001 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7f700000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88007fc00000 s84288 r8192 d22208 u1048576
[ 0.000000] pcpu-alloc: s84288 r8192 d22208 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516922
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-02063808-generic root=UUID=2ef993f5-b307-4983-9779-44cc76b134f9 ro crashkernel=384M-2G:64M,2G-:128M quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 6fa8000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 1975128k/2096832k available (5889k kernel code, 452k absent, 121252k reserved, 5073k data, 1052k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 20971520 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3006.964 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.010006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6013.92 BogoMIPS (lpj=30069640)
[ 0.010009] pid_max: default: 32768 minimum: 301
[ 0.010034] Security Framework initialized
[ 0.010052] AppArmor: AppArmor initialized
[ 0.010241] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.011185] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.011685] Mount-cache hash table entries: 256
[ 0.011809] Initializing cgroup subsys ns
[ 0.011812] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.011814] Initializing cgroup subsys cpuacct
[ 0.011818] Initializing cgroup subsys memory
[ 0.011826] Initializing cgroup subsys devices
[ 0.011828] Initializing cgroup subsys freezer
[ 0.011830] Initializing cgroup subsys net_cls
[ 0.011831] Initializing cgroup subsys blkio
[ 0.011860] tseg: 0000000000
[ 0.011873] CPU: Physical Processor ID: 0
[ 0.011874] CPU: Processor Core ID: 0
[ 0.011876] mce: CPU supports 5 MCE banks
[ 0.011886] using C1E aware idle routine
[ 0.013404] ACPI: Core revision 20110112
[ 0.016375] ftrace: allocating 28133 entries in 111 pages
[ 0.020092] Setting APIC routing to flat
[ 0.020399] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.125286] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[ 0.130000] Performance Events: AMD PMU driver.
[ 0.130000] ... version: 0
[ 0.130000] ... bit width: 48
[ 0.130000] ... generic registers: 4
[ 0.130000] ... value mask: 0000ffffffffffff
[ 0.130000] ... max period: 00007fffffffffff
[ 0.130000] ... fixed-purpose events: 0
[ 0.130000] ... event mask: 000000000000000f
[ 0.130000] Booting Node 0, Processors #1 Ok.
[ 0.280073] Brought up 2 CPUs
[ 0.280075] Total of 2 processors activated (12027.57 BogoMIPS).
[ 0.280631] devtmpfs: initialized
[ 0.280780] print_constraints: dummy:
[ 0.280806] Time: 9:20:37 Date: 09/16/12
[ 0.280839] NET: Registered protocol family 16
[ 0.280920] node 0 link 0: io port [1000, ffffff]
[ 0.280922] TOM: 0000000080000000 aka 2048M
[ 0.280925] node 0 link 0: mmio [e0000000, efffffff]
[ 0.280928] node 0 link 0: mmio [80000000, dfffffff]
[ 0.280930] node 0 link 0: mmio [a0000, bffff]
[ 0.280932] node 0 link 0: mmio [f0000000, ffffffff]
[ 0.280934] bus: [00, ff] on node 0 link 0
[ 0.280936] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.280937] bus: 00 index 1 [mem 0x80000000-0xfcffffffff]
[ 0.280939] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.280947] ACPI: bus type pci registered
[ 0.281007] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.281010] PCI: not using MMCONFIG
[ 0.281011] PCI: Using configuration type 1 for base access
[ 0.281587] bio: create slab <bio-0> at 0
[ 0.281587] ACPI: EC: Look up EC in DSDT
[ 0.281587] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.284132] ACPI: Interpreter enabled
[ 0.284135] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.284154] ACPI: Using IOAPIC for interrupt routing
[ 0.284215] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.284701] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.306850] ACPI: No dock devices found.
[ 0.306852] HEST: Table not found.
[ 0.306855] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.306911] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.307031] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.307033] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.307035] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.307037] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.307039] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.307048] pci 0000:00:00.0: [1002:5952] type 0 class 0x000600
[ 0.307079] pci 0000:00:03.0: [1002:5a35] type 1 class 0x000604
[ 0.307104] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.307107] pci 0000:00:03.0: PME# disabled
[ 0.307123] pci 0000:00:05.0: [1002:5a37] type 1 class 0x000604
[ 0.307148] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.307150] pci 0000:00:05.0: PME# disabled
[ 0.307189] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
[ 0.307212] pci 0000:00:12.0: reg 10: [io 0xb000-0xb007]
[ 0.307222] pci 0000:00:12.0: reg 14: [io 0xa000-0xa003]
[ 0.307232] pci 0000:00:12.0: reg 18: [io 0x9000-0x9007]
[ 0.307243] pci 0000:00:12.0: reg 1c: [io 0x8000-0x8003]
[ 0.307253] pci 0000:00:12.0: reg 20: [io 0x7000-0x700f]
[ 0.307263] pci 0000:00:12.0: reg 24: [mem 0xfbcffc00-0xfbcfffff]
[ 0.307285] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.307334] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.307352] pci 0000:00:13.0: reg 10: [mem 0xfbcfe000-0xfbcfefff]
[ 0.307440] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.307458] pci 0000:00:13.1: reg 10: [mem 0xfbcfd000-0xfbcfdfff]
[ 0.307546] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.307564] pci 0000:00:13.2: reg 10: [mem 0xfbcfc000-0xfbcfcfff]
[ 0.307651] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.307670] pci 0000:00:13.3: reg 10: [mem 0xfbcfb000-0xfbcfbfff]
[ 0.307757] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.307775] pci 0000:00:13.4: reg 10: [mem 0xfbcfa000-0xfbcfafff]
[ 0.307867] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.307890] pci 0000:00:13.5: reg 10: [mem 0xfbcff800-0xfbcff8ff]
[ 0.307971] pci 0000:00:13.5: supports D1 D2
[ 0.307973] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.307977] pci 0000:00:13.5: PME# disabled
[ 0.308004] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.308027] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.308037] pci 0000:00:14.0: reg 14: [mem 0xfed00000-0xfed003ff]
[ 0.308114] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.308132] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.308142] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.308152] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.308162] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.308172] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.308229] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.308255] pci 0000:00:14.2: reg 10: [mem 0xfbcf4000-0xfbcf7fff 64bit]
[ 0.308322] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.308326] pci 0000:00:14.2: PME# disabled
[ 0.308344] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.308423] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.308472] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.308490] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.308506] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.308524] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.308549] PCI: peer root bus 00 res updated from pci conf
[ 0.308585] pci 0000:01:00.0: [1002:6759] type 0 class 0x000300
[ 0.308600] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.308612] pci 0000:01:00.0: reg 18: [mem 0xfbde0000-0xfbdfffff 64bit]
[ 0.308620] pci 0000:01:00.0: reg 20: [io 0xc000-0xc0ff]
[ 0.308634] pci 0000:01:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
[ 0.308657] pci 0000:01:00.0: supports D1 D2
[ 0.308681] pci 0000:01:00.1: [1002:aa90] type 0 class 0x000403
[ 0.308696] pci 0000:01:00.1: reg 10: [mem 0xfbdbc000-0xfbdbffff 64bit]
[ 0.308747] pci 0000:01:00.1: supports D1 D2
[ 0.320016] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.320019] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.320022] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.320026] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.320067] pci 0000:02:00.0: [197b:2360] type 0 class 0x000101
[ 0.320095] pci 0000:02:00.0: reg 10: [io 0xdc00-0xdc07]
[ 0.320108] pci 0000:02:00.0: reg 14: [io 0xd880-0xd883]
[ 0.320120] pci 0000:02:00.0: reg 18: [io 0xd800-0xd807]
[ 0.320133] pci 0000:02:00.0: reg 1c: [io 0xd480-0xd483]
[ 0.320146] pci 0000:02:00.0: reg 20: [io 0xd400-0xd40f]
[ 0.320159] pci 0000:02:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
[ 0.320199] pci 0000:02:00.0: PME# supported from D3hot
[ 0.320204] pci 0000:02:00.0: PME# disabled
[ 0.320220] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.320228] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.320231] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.320234] pci 0000:00:05.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.320237] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.320270] pci 0000:03:03.0: [1106:3044] type 0 class 0x000c00
[ 0.320294] pci 0000:03:03.0: reg 10: [mem 0xfbfff800-0xfbffffff]
[ 0.320307] pci 0000:03:03.0: reg 14: [io 0xec00-0xec7f]
[ 0.320392] pci 0000:03:03.0: supports D2
[ 0.320394] pci 0000:03:03.0: PME# supported from D2 D3hot D3cold
[ 0.320399] pci 0000:03:03.0: PME# disabled
[ 0.320425] pci 0000:03:04.0: [11ab:4320] type 0 class 0x000200
[ 0.320451] pci 0000:03:04.0: reg 10: [mem 0xfbff8000-0xfbffbfff]
[ 0.320464] pci 0000:03:04.0: reg 14: [io 0xe800-0xe8ff]
[ 0.320521] pci 0000:03:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
[ 0.320553] pci 0000:03:04.0: supports D1 D2
[ 0.320554] pci 0000:03:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.320559] pci 0000:03:04.0: PME# disabled
[ 0.320613] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.320620] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.320624] pci 0000:00:14.4: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.320628] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.320631] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.320633] pci 0000:00:14.4: bridge window [mem 0x80000000-0xfcffffffff] (subtractive decode)
[ 0.320635] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.320647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.320694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
[ 0.320719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
[ 0.320762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[ 0.320831] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.327366] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.327403] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.327438] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.327473] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.327508] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.327543] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.327575] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.327611] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.327705] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.327709] vgaarb: loaded
[ 0.327875] SCSI subsystem initialized
[ 0.327891] libata version 3.00 loaded.
[ 0.327891] usbcore: registered new interface driver usbfs
[ 0.327891] usbcore: registered new interface driver hub
[ 0.327891] usbcore: registered new device driver usb
[ 0.327891] wmi: Mapper loaded
[ 0.327891] PCI: Using ACPI for IRQ routing
[ 0.327891] PCI: pci_cache_line_size set to 64 bytes
[ 0.327891] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.327891] reserve RAM buffer: 000000007ffb0000 - 000000007fffffff
[ 0.327891] NetLabel: Initializing
[ 0.327891] NetLabel: domain hash size = 128
[ 0.327891] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.327891] NetLabel: unlabeled traffic allowed by default
[ 0.327891] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.327891] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.330023] Switching to clocksource hpet
[ 0.336768] AppArmor: AppArmor Filesystem Enabled
[ 0.336801] pnp: PnP ACPI init
[ 0.336822] ACPI: bus type pnp registered
[ 0.336935] pnp 00:00: [bus 00-ff]
[ 0.336937] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.336939] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.336940] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.336942] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.336944] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.336946] pnp 00:00: [mem 0x80000000-0xffffffff window]
[ 0.337006] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.337056] pnp 00:01: [dma 4]
[ 0.337057] pnp 00:01: [io 0x0000-0x000f]
[ 0.337059] pnp 00:01: [io 0x0081-0x0083]
[ 0.337060] pnp 00:01: [io 0x0087]
[ 0.337062] pnp 00:01: [io 0x0089-0x008b]
[ 0.337063] pnp 00:01: [io 0x008f]
[ 0.337065] pnp 00:01: [io 0x00c0-0x00df]
[ 0.337092] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.337101] pnp 00:02: [io 0x0070-0x0071]
[ 0.337113] pnp 00:02: [irq 8]
[ 0.337138] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.337145] pnp 00:03: [io 0x0061]
[ 0.337172] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.337180] pnp 00:04: [io 0x00f0-0x00ff]
[ 0.337184] pnp 00:04: [irq 13]
[ 0.337210] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.337710] pnp 00:05: [io 0x03f0-0x03f5]
[ 0.337712] pnp 00:05: [io 0x03f7]
[ 0.337716] pnp 00:05: [irq 6]
[ 0.337718] pnp 00:05: [dma 2]
[ 0.337767] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.337856] pnp 00:06: [io 0x0010-0x001f]
[ 0.337858] pnp 00:06: [io 0x0022-0x003f]
[ 0.337859] pnp 00:06: [io 0x0062-0x0063]
[ 0.337861] pnp 00:06: [io 0x0065-0x006f]
[ 0.337862] pnp 00:06: [io 0x0072-0x007f]
[ 0.337864] pnp 00:06: [io 0x0080]
[ 0.337865] pnp 00:06: [io 0x0084-0x0086]
[ 0.337867] pnp 00:06: [io 0x0088]
[ 0.337868] pnp 00:06: [io 0x008c-0x008e]
[ 0.337870] pnp 00:06: [io 0x0090-0x009f]
[ 0.337871] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.337872] pnp 00:06: [io 0x00b1]
[ 0.337874] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.337875] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.337877] pnp 00:06: [io 0x040b]
[ 0.337878] pnp 00:06: [io 0x04d6]
[ 0.337880] pnp 00:06: [io 0x0c00-0x0c01]
[ 0.337881] pnp 00:06: [io 0x0c14]
[ 0.337883] pnp 00:06: [io 0x0c50-0x0c51]
[ 0.337884] pnp 00:06: [io 0x0c52]
[ 0.337886] pnp 00:06: [io 0x0c6c]
[ 0.337887] pnp 00:06: [io 0x0c6f]
[ 0.337888] pnp 00:06: [io 0x0cd0-0x0cd1]
[ 0.337890] pnp 00:06: [io 0x0cd2-0x0cd3]
[ 0.337891] pnp 00:06: [io 0x0cd4-0x0cd5]
[ 0.337893] pnp 00:06: [io 0x0cd6-0x0cd7]
[ 0.337894] pnp 00:06: [io 0x0cd8-0x0cdf]
[ 0.337899] pnp 00:06: [io 0x0800-0x089f]
[ 0.337900] pnp 00:06: [io 0x0b10-0x0b1f]
[ 0.337902] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.337904] pnp 00:06: [io 0x0900-0x090f]
[ 0.337905] pnp 00:06: [io 0x0910-0x091f]
[ 0.337907] pnp 00:06: [io 0xfe00-0xfefe]
[ 0.337908] pnp 00:06: [mem 0xffb80000-0xffbfffff]
[ 0.337910] pnp 00:06: [mem 0xfff00000-0xffffffff]
[ 0.337912] pnp 00:06: [mem 0xff600000-0xff60ffff]
[ 0.338036] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.338038] system 00:06: [io 0x040b] has been reserved
[ 0.338040] system 00:06: [io 0x04d6] has been reserved
[ 0.338045] system 00:06: [io 0x0c00-0x0c01] has been reserved
[ 0.338047] system 00:06: [io 0x0c14] has been reserved
[ 0.338049] system 00:06: [io 0x0c50-0x0c51] has been reserved
[ 0.338051] system 00:06: [io 0x0c52] has been reserved
[ 0.338053] system 00:06: [io 0x0c6c] has been reserved
[ 0.338055] system 00:06: [io 0x0c6f] has been reserved
[ 0.338057] system 00:06: [io 0x0cd0-0x0cd1] has been reserved
[ 0.338059] system 00:06: [io 0x0cd2-0x0cd3] has been reserved
[ 0.338061] system 00:06: [io 0x0cd4-0x0cd5] has been reserved
[ 0.338063] system 00:06: [io 0x0cd6-0x0cd7] has been reserved
[ 0.338065] system 00:06: [io 0x0cd8-0x0cdf] has been reserved
[ 0.338067] system 00:06: [io 0x0800-0x089f] has been reserved
[ 0.338069] system 00:06: [io 0x0b10-0x0b1f] has been reserved
[ 0.338072] system 00:06: [io 0x0900-0x090f] has been reserved
[ 0.338074] system 00:06: [io 0x0910-0x091f] has been reserved
[ 0.338076] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.338079] system 00:06: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.338082] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.338084] system 00:06: [mem 0xff600000-0xff60ffff] has been reserved
[ 0.338087] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.338110] pnp 00:07: [io 0x0060]
[ 0.338112] pnp 00:07: [io 0x0064]
[ 0.338116] pnp 00:07: [irq 1]
[ 0.338143] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.338168] pnp 00:08: [irq 12]
[ 0.338198] pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.338251] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[ 0.338278] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.338315] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.338317] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.338362] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.338365] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.338367] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.338817] pnp 00:0b: [io 0x03f8-0x03ff]
[ 0.338821] pnp 00:0b: [irq 4]
[ 0.338822] pnp 00:0b: [dma 0 disabled]
[ 0.338875] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.338999] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled]
[ 0.339001] pnp 00:0c: [io 0x0e00-0x0e0f]
[ 0.339002] pnp 00:0c: [io 0x0e80-0x0e8f]
[ 0.339004] pnp 00:0c: [io 0x0f40-0x0f4f]
[ 0.339005] pnp 00:0c: [io 0x0a30-0x0a3f]
[ 0.339054] system 00:0c: [io 0x0e00-0x0e0f] has been reserved
[ 0.339056] system 00:0c: [io 0x0e80-0x0e8f] has been reserved
[ 0.339058] system 00:0c: [io 0x0f40-0x0f4f] has been reserved
[ 0.339060] system 00:0c: [io 0x0a30-0x0a3f] has been reserved
[ 0.339062] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.339090] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.339133] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.339135] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.339183] pnp 00:0e: [mem 0xf0000000-0xf08fffff]
[ 0.339232] system 00:0e: [mem 0xf0000000-0xf08fffff] has been reserved
[ 0.339234] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.339324] pnp 00:0f: [mem 0x00000000-0x0009ffff]
[ 0.339326] pnp 00:0f: [mem 0x000c0000-0x000cffff]
[ 0.339327] pnp 00:0f: [mem 0x000e0000-0x000fffff]
[ 0.339329] pnp 00:0f: [mem 0x00100000-0x7fffffff]
[ 0.339331] pnp 00:0f: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.339381] system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.339384] system 00:0f: [mem 0x000c0000-0x000cffff] has been reserved
[ 0.339386] system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.339388] system 00:0f: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.339390] system 00:0f: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.339489] pnp: PnP ACPI: found 16 devices
[ 0.339490] ACPI: ACPI bus type pnp unregistered
[ 0.339572] Switched to NOHz mode on CPU #0
[ 0.339603] Switched to NOHz mode on CPU #1
[ 0.345471] pci 0000:00:03.0: PCI bridge to [bus 01-01]
[ 0.345474] pci 0000:00:03.0: bridge window [io 0xc000-0xcfff]
[ 0.345477] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.345480] pci 0000:00:03.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.345483] pci 0000:00:05.0: PCI bridge to [bus 02-02]
[ 0.345485] pci 0000:00:05.0: bridge window [io 0xd000-0xdfff]
[ 0.345488] pci 0000:00:05.0: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.345490] pci 0000:00:05.0: bridge window [mem pref disabled]
[ 0.345494] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.345497] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.345502] pci 0000:00:14.4: bridge window [mem 0xfbf00000-0xfbffffff]
[ 0.345506] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.345518] pci 0000:00:03.0: setting latency timer to 64
[ 0.345522] pci 0000:00:05.0: setting latency timer to 64
[ 0.345529] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.345531] pci_bus 0000:00: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.345533] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.345535] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.345537] pci_bus 0000:01: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.345539] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.345541] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.345543] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.345545] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.345547] pci_bus 0000:03: resource 1 [mem 0xfbf00000-0xfbffffff]
[ 0.345549] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.345550] pci_bus 0000:03: resource 5 [mem 0x80000000-0xfcffffffff]
[ 0.345552] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.345586] NET: Registered protocol family 2
[ 0.345689] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.346402] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.347987] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.348447] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.348449] TCP reno registered
[ 0.348460] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.348482] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.348579] NET: Registered protocol family 1
[ 0.530054] pci 0000:01:00.0: Boot video device
[ 0.530067] PCI: CLS 64 bytes, default 64
[ 0.530113] Trying to unpack rootfs image as initramfs...
[ 0.750993] Freeing initrd memory: 13252k freed
[ 0.758121] audit: initializing netlink socket (disabled)
[ 0.758133] type=2000 audit(1347787237.750:1): initialized
[ 0.770561] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.772172] VFS: Disk quotas dquot_6.5.2
[ 0.772224] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.772778] fuse init (API version 7.16)
[ 0.772866] msgmni has been set to 3883
[ 0.773150] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.773189] io scheduler noop registered
[ 0.773191] io scheduler deadline registered
[ 0.773228] io scheduler cfq registered (default)
[ 0.773361] pcieport 0000:00:03.0: setting latency timer to 64
[ 0.773395] pcieport 0000:00:03.0: irq 40 for MSI/MSI-X
[ 0.773477] pcieport 0000:00:05.0: setting latency timer to 64
[ 0.773500] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X
[ 0.773574] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.773594] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.773725] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.773729] ACPI: Power Button [PWRB]
[ 0.773768] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.773771] ACPI: Power Button [PWRF]
[ 0.773927] ACPI: acpi_idle registered with cpuidle
[ 0.773942] ACPI: duty_cycle spans bit 4
[ 0.775520] ERST: Table is not found!
[ 0.775571] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.796251] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.170774] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.180216] Linux agpgart interface v0.103
[ 1.181226] brd: module loaded
[ 1.181699] loop: module loaded
[ 1.181775] i2c-core: driver [adp5520] using legacy suspend method
[ 1.181777] i2c-core: driver [adp5520] using legacy resume method
[ 1.181944] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.181976] pata_acpi 0000:00:14.1: setting latency timer to 64
[ 1.182289] Fixed MDIO Bus: probed
[ 1.182315] PPP generic driver version 2.4.2
[ 1.182345] tun: Universal TUN/TAP device driver, 1.6
[ 1.182347] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.182416] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.182465] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.182481] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.182535] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.220040] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.220056] ehci_hcd 0000:00:13.5: debug port 1
[ 1.220078] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfbcff800
[ 1.240018] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.240118] hub 1-0:1.0: USB hub found
[ 1.240123] hub 1-0:1.0: 10 ports detected
[ 1.240219] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.240259] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.240268] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.240305] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.240345] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfbcfe000
[ 1.304099] hub 2-0:1.0: USB hub found
[ 1.304105] hub 2-0:1.0: 2 ports detected
[ 1.304212] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.304220] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.304254] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.304289] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfbcfd000
[ 1.364096] hub 3-0:1.0: USB hub found
[ 1.364101] hub 3-0:1.0: 2 ports detected
[ 1.364199] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.364207] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.364239] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.364276] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfbcfc000
[ 1.424106] hub 4-0:1.0: USB hub found
[ 1.424112] hub 4-0:1.0: 2 ports detected
[ 1.424208] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.424216] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.424249] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.424279] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfbcfb000
[ 1.484092] hub 5-0:1.0: USB hub found
[ 1.484097] hub 5-0:1.0: 2 ports detected
[ 1.484195] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.484204] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.484244] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.484275] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfbcfa000
[ 1.544125] hub 6-0:1.0: USB hub found
[ 1.544131] hub 6-0:1.0: 2 ports detected
[ 1.544202] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.560103] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.560473] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.560477] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.560542] mousedev: PS/2 mouse device common for all mice
[ 1.560632] rtc_cmos 00:02: RTC can wake from S4
[ 1.585620] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 1.590059] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.590086] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.590162] device-mapper: uevent: version 1.0.3
[ 1.590221] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
[ 1.590293] device-mapper: multipath: version 1.2.0 loaded
[ 1.590295] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.590408] cpuidle: using governor ladder
[ 1.590409] cpuidle: using governor menu
[ 1.590649] TCP cubic registered
[ 1.590752] NET: Registered protocol family 10
[ 1.591340] NET: Registered protocol family 17
[ 1.591357] Registering the dns_resolver key type
[ 1.591380] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
[ 1.591389] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 1.591390] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 1.591488] PM: Hibernation image not present or could not be loaded.
[ 1.591498] registered taskstats version 1
[ 1.592247] Magic number: 12:444:323
[ 1.592279] tty tty48: hash matches
[ 1.592347] rtc_cmos 00:02: setting system clock to 2012-09-16 09:20:39 UTC (1347787239)
[ 1.592349] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.592350] EDD information not available.
[ 1.593683] Freeing unused kernel memory: 1052k freed
[ 1.594142] Write protecting the kernel read-only data: 10240k
[ 1.594815] Freeing unused kernel memory: 236k freed
[ 1.598269] Freeing unused kernel memory: 1368k freed
[ 1.613232] <30>udevd[99]: starting version 175
[ 1.623985] usb 1-2: new high speed USB device using ehci_hcd and address 3
[ 1.695326] scsi0 : pata_atiixp
[ 1.697793] scsi1 : pata_atiixp
[ 1.698649] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.698652] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.729238] skge 0000:03:04.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.729303] skge: 1.13 addr 0xfbff8000 irq 23 chip Yukon-Lite rev 9
[ 1.739861] Floppy drive(s): fd0 is 1.44M
[ 1.744863] ahci 0000:00:12.0: version 3.0
[ 1.744893] ahci 0000:00:12.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 1.744925] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.745016] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.745019] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.746488] scsi2 : ahci
[ 1.747200] scsi3 : ahci
[ 1.747980] scsi4 : ahci
[ 1.749029] scsi5 : ahci
[ 1.749149] ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 21
[ 1.749153] ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 21
[ 1.749156] ata5: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 21
[ 1.749159] ata6: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 21
[ 1.750708] skge 0000:03:04.0: eth0: addr 00:1b:fc:f7:a8:da
[ 1.750765] ahci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.758563] FDC 0 is a post-1991 82077
[ 1.770078] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.770081] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.770087] ahci 0000:02:00.0: setting latency timer to 64
[ 1.770369] scsi6 : ahci
[ 1.770456] ata7: SATA max UDMA/133 abar m8192@0xfbefe000 port 0xfbefe100 irq 17
[ 1.870632] ata1.01: ATA-6: WDC WD3200JB-00KFA0, 08.05J08, max UDMA/100
[ 1.870636] ata1.01: 625142448 sectors, multi 16: LBA48
[ 1.890564] ata1.01: configured for UDMA/100
[ 1.890694] scsi 0:0:1:0: Direct-Access ATA WDC WD3200JB-00K 08.0 PQ: 0 ANSI: 5
[ 1.890841] sd 0:0:1:0: Attached scsi generic sg0 type 0
[ 1.890910] sd 0:0:1:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.890960] sd 0:0:1:0: [sda] Write Protect is off
[ 1.890963] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 1.891002] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.914886] sda: sda1 < sda5 sda6 > sda2 sda3
[ 1.915191] sd 0:0:1:0: [sda] Attached SCSI disk
[ 2.060031] usb 1-4: new high speed USB device using ehci_hcd and address 4
[ 2.120035] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.211537] hub 1-4:1.0: USB hub found
[ 2.211887] hub 1-4:1.0: 4 ports detected
[ 2.300031] ata6: softreset failed (device not ready)
[ 2.300039] ata6: applying SB600 PMP SRST workaround and retrying
[ 2.300056] ata3: softreset failed (device not ready)
[ 2.300060] ata3: applying SB600 PMP SRST workaround and retrying
[ 2.300077] ata4: softreset failed (device not ready)
[ 2.300080] ata4: applying SB600 PMP SRST workaround and retrying
[ 2.300097] ata5: softreset failed (device not ready)
[ 2.300100] ata5: applying SB600 PMP SRST workaround and retrying
[ 2.500029] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.500052] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.500070] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.500088] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.500798] ata4.00: ATA-8: WDC WD1001FALS-00J7B0, 05.00K05, max UDMA/133
[ 2.500800] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.500803] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.501617] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.501619] ata4.00: configured for UDMA/133
[ 2.502007] ata5.00: ATA-8: WDC WD10EADS-00P8B0, 01.00A01, max UDMA/133
[ 2.502009] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.502011] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.504909] ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.504911] ata5.00: configured for UDMA/133
[ 2.511892] ata3.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
[ 2.511894] ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.511896] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.512783] ata6.00: ATAPI: Optiarc DVD RW AD-7191S, 1.01, max UDMA/100
[ 2.512785] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.512826] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.512828] ata3.00: configured for UDMA/133
[ 2.512961] scsi 2:0:0:0: Direct-Access ATA WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
[ 2.513120] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.513242] scsi 3:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5
[ 2.513252] sd 2:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.513296] sd 2:0:0:0: [sdb] Write Protect is off
[ 2.513298] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.513315] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.513357] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.513456] scsi 4:0:0:0: Direct-Access ATA WDC WD10EADS-00P 01.0 PQ: 0 ANSI: 5
[ 2.513549] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 2.513619] sd 4:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.513659] sd 4:0:0:0: [sdd] Write Protect is off
[ 2.513661] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.513679] sd 3:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.513696] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.513806] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.513809] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.513825] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.520026] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 2.526209] ata6.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.526211] ata6.00: configured for UDMA/100
[ 2.529655] scsi 5:0:0:0: CD-ROM Optiarc DVD RW AD-7191S 1.01 PQ: 0 ANSI: 5
[ 2.529933] sdc: sdc1 < sdc5 >
[ 2.530213] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.532867] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.532870] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.532949] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.533013] sr 5:0:0:0: Attached scsi generic sg4 type 5
[ 2.580438] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[ 2.580769] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 2.790239] usb 1-4.4: new high speed USB device using ehci_hcd and address 5
[ 2.901557] hub 1-4.4:1.0: USB hub found
[ 2.901881] hub 1-4.4:1.0: 4 ports detected
[ 3.015746] sdd: sdd1 < sdd5 >
[ 3.016037] sd 4:0:0:0: [sdd] Attached SCSI disk
[ 3.025305] firewire_ohci 0000:03:03.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.029390] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input3
[ 3.029500] generic-usb 0003:045E:0039.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0
[ 3.029521] usbcore: registered new interface driver usbhid
[ 3.029523] usbhid: USB HID core driver
[ 3.110105] firewire_ohci: Added fw-ohci device 0000:03:03.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 3.180311] usb 1-4.4.1: new full speed USB device using ehci_hcd and address 6
[ 3.601053] EXT4-fs (sdb7): INFO: recovery required on readonly filesystem
[ 3.601056] EXT4-fs (sdb7): write access will be enabled during recovery
[ 3.610110] firewire_core: created device fw0: GUID 0011d80001653f43, S400
[ 4.662497] EXT4-fs (sdb7): recovery complete
[ 4.662884] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 19.664895] <30>udevd[481]: starting version 175
[ 19.731020] Adding 2000056k swap on /dev/sdb9. Priority:-1 extents:1 across:2000056k
[ 20.061418] Bluetooth: Core ver 2.15
[ 20.061443] NET: Registered protocol family 31
[ 20.061444] Bluetooth: HCI device and connection manager initialized
[ 20.061447] Bluetooth: HCI socket layer initialized
[ 20.153221] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 20.181955] MCE: In-kernel MCE decoding enabled.
[ 20.389367] EDAC MC: Ver: 2.1.0 Jun 4 2011
[ 20.530033] type=1400 audit(1347776458.424:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=761 comm="apparmor_parser"
[ 20.530135] type=1400 audit(1347776458.434:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
[ 20.530190] type=1400 audit(1347776458.434:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
[ 20.546467] Linux video capture interface: v2.00
[ 20.584150] type=1400 audit(1347776458.484:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=743 comm="apparmor_parser"
[ 20.584231] type=1400 audit(1347776458.484:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=743 comm="apparmor_parser"
[ 20.584286] type=1400 audit(1347776458.484:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=743 comm="apparmor_parser"
[ 20.597997] EDAC amd64_edac: v3.3.0
[ 20.605173] EDAC amd64: DRAM ECC enabled.
[ 20.605184] EDAC amd64: K8 revF or later detected (node 0).
[ 20.605204] EDAC MC: DCT0 chip selects:
[ 20.605206] EDAC amd64: MC: 0: 1024MB 1: 1024MB
[ 20.605208] EDAC amd64: MC: 2: 0MB 3: 0MB
[ 20.605209] EDAC amd64: MC: 4: 0MB 5: 0MB
[ 20.605210] EDAC amd64: MC: 6: 0MB 7: 0MB
[ 20.605267] EDAC amd64: CS0: Unbuffered DDR2 RAM
[ 20.605269] EDAC amd64: CS1: Unbuffered DDR2 RAM
[ 20.605898] EDAC MC0: Giving out device to 'amd64_edac' 'K8': DEV 0000:00:18.2
[ 20.606001] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED)
[ 20.624568] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 20.625336] usbcore: registered new interface driver btusb
[ 20.689123] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 20.865223] uvcvideo: Found UVC 1.00 device Trust 2MP Auto Focus Webcam (145f:015b)
[ 21.052639] input: Trust 2MP Auto Focus Webcam as /devices/pci0000:00/0000:00:13.5/usb1/1-2/1-2:1.0/input/input4
[ 21.052705] usbcore: registered new interface driver uvcvideo
[ 21.052707] USB Video Class driver (v1.0.0)
[ 21.124196] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 21.124277] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 21.305833] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 21.305838] Disabling lock debugging due to kernel taint
[ 21.410536] lp: driver loaded but no devices found
[ 21.419438] [fglrx] Maximum main memory to use for locked dma buffers: 1820 MBytes.
[ 21.419573] [fglrx] vendor: 1002 device: 6759 count: 1
[ 21.420042] [fglrx] ioport: bar 4, base 0xc000, size: 0x100
[ 21.420305] pci 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 21.420310] pci 0000:01:00.0: setting latency timer to 64
[ 21.420632] [fglrx] Kernel PAT support is enabled
[ 21.420649] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors
[ 21.725814] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 21.725886] HDA Intel 0000:00:14.2: irq 42 for MSI/MSI-X
[ 22.192815] hda_codec: AD1988: BIOS auto-probing.
[ 22.195712] HDA Intel 0000:01:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 22.195768] HDA Intel 0000:01:00.1: irq 43 for MSI/MSI-X
[ 22.195792] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 23.304184] usbcore: registered new interface driver snd-usb-audio
[ 23.443399] init: udev-fallback-graphics main process (925) terminated with status 1
[ 24.964298] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro
[ 29.225014] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: (null)
[ 30.953590] init: failsafe main process (1023) killed by TERM signal
[ 31.301117] ppdev: user-space parallel port driver
[ 31.354721] skge 0000:03:04.0: eth0: enabling interface
[ 31.367604] Bluetooth: L2CAP ver 2.15
[ 31.367608] Bluetooth: L2CAP socket layer initialized
[ 31.420130] Bluetooth: RFCOMM TTY layer initialized
[ 31.420136] Bluetooth: RFCOMM socket layer initialized
[ 31.420137] Bluetooth: RFCOMM ver 1.11
[ 31.423949] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.423952] Bluetooth: BNEP filters: protocol multicast
[ 31.452848] Bluetooth: SCO (Voice Link) ver 0.6
[ 31.452851] Bluetooth: SCO socket layer initialized
[ 31.709692] type=1400 audit(1347776469.604:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1080 comm="apparmor_parser"
[ 31.950085] type=1400 audit(1347776469.854:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1081 comm="apparmor_parser"
[ 31.950186] type=1400 audit(1347776469.854:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1081 comm="apparmor_parser"
[ 31.950239] type=1400 audit(1347776469.854:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1081 comm="apparmor_parser"
[ 32.158124] type=1400 audit(1347776470.054:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1117 comm="apparmor_parser"
[ 32.158267] type=1400 audit(1347776470.054:13): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1117 comm="apparmor_parser"
[ 32.948434] type=1400 audit(1347776470.844:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1127 comm="apparmor_parser"
[ 32.948583] type=1400 audit(1347776470.844:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1127 comm="apparmor_parser"
[ 33.041418] skge 0000:03:04.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 33.622655] type=1400 audit(1347776471.524:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1136 comm="apparmor_parser"
[ 33.622793] type=1400 audit(1347776471.524:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1136 comm="apparmor_parser"
[ 35.944564] init: mediatomb main process (1196) terminated with status 127
[ 35.944592] init: mediatomb main process ended, respawning
[ 35.950804] init: mediatomb main process (1207) terminated with status 127
[ 35.950828] init: mediatomb main process ended, respawning
[ 35.966579] init: mediatomb main process (1209) terminated with status 127
[ 35.966609] init: mediatomb main process ended, respawning
[ 35.971766] init: mediatomb main process (1211) terminated with status 127
[ 35.971790] init: mediatomb main process ended, respawning
[ 35.976312] init: mediatomb main process (1213) terminated with status 127
[ 35.976336] init: mediatomb main process ended, respawning
[ 35.981901] init: mediatomb main process (1215) terminated with status 127
[ 35.981925] init: mediatomb main process ended, respawning
[ 35.987593] init: mediatomb main process (1217) terminated with status 127
[ 35.987617] init: mediatomb main process ended, respawning
[ 35.993682] init: mediatomb main process (1219) terminated with status 127
[ 35.993707] init: mediatomb main process ended, respawning
[ 35.999364] init: mediatomb main process (1221) terminated with status 127
[ 35.999387] init: mediatomb main process ended, respawning
[ 36.005244] init: mediatomb main process (1223) terminated with status 127
[ 36.005268] init: mediatomb main process ended, respawning
[ 36.011070] init: mediatomb main process (1225) terminated with status 127
[ 36.011094] init: mediatomb respawning too fast, stopped
[ 40.966273] audit_printk_skb: 3 callbacks suppressed
[ 40.966277] type=1400 audit(1347776478.864:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1125 comm="apparmor_parser"
[ 40.966627] type=1400 audit(1347776478.864:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1125 comm="apparmor_parser"
[ 40.966733] type=1400 audit(1347776478.864:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1125 comm="apparmor_parser"
[ 40.967428] type=1400 audit(1347776478.864:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1125 comm="apparmor_parser"
[ 40.967684] type=1400 audit(1347776478.864:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1125 comm="apparmor_parser"
[ 40.967786] type=1400 audit(1347776478.864:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1125 comm="apparmor_parser"
[ 40.968262] type=1400 audit(1347776478.864:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1125 comm="apparmor_parser"
[ 40.968390] type=1400 audit(1347776478.864:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1125 comm="apparmor_parser"
[ 41.333927] fglrx_pci 0000:01:00.0: irq 44 for MSI/MSI-X
[ 41.334614] [fglrx] Firegl kernel thread PID: 1321
[ 41.334748] [fglrx] Firegl kernel thread PID: 1322
[ 41.334828] [fglrx] Firegl kernel thread PID: 1323
[ 41.334984] [fglrx] IRQ 44 Enabled
[ 41.670974] [fglrx] Gart USWC size:608 M.
[ 41.670978] [fglrx] Gart cacheable size:239 M.
[ 41.670982] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 41.670984] [fglrx] Reserved FB block: Unshared offset:fb17000, size:1e9000
[ 41.670986] [fglrx] Reserved FB block: Unshared offset:7fff4000, size:c000
[ 41.720026] eth0: no IPv6 routers present
[ 42.290649] init: plymouth-stop pre-start process (1560) terminated with status 1
[ 51.225669] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1267.979001] type=1400 audit(1347777705.876:27): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F7B44303545303533412D364143342D343030412D384141362D3438384646434336374334327D5F31312D31312D323031302D46594C4C4F2E7064662E70617274 pid=7459 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1267.986377] type=1400 audit(1347777705.886:28): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F7B44303545303533412D364143342D343030412D384141362D3438384646434336374334327D5F31312D31312D323031302D46594C4C4F2E7064662E70617274 pid=7459 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1268.283851] type=1400 audit(1347777706.186:29): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F44454820333432 pid=7462 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1268.284043] type=1400 audit(1347777706.186:30): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F44454820333432 pid=7462 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1270.921102] type=1400 audit(1347777708.826:31): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F7064667265706F7274 pid=7565 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1270.921295] type=1400 audit(1347777708.826:32): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F7064667265706F7274 pid=7565 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1270.954832] type=1400 audit(1347777708.856:33): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F7064667265706F727433 pid=7566 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1270.955026] type=1400 audit(1347777708.856:34): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F7064667265706F727433 pid=7566 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1270.981268] type=1400 audit(1347777708.886:35): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F7064667265706F7274283229 pid=7567 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1270.981461] type=1400 audit(1347777708.886:36): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F7064667265706F7274283229 pid=7567 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1282.657457] audit_printk_skb: 12 callbacks suppressed
[ 1282.657461] type=1400 audit(1347777720.556:41): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F566F6461666F6E652032342E3939 pid=7718 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1282.657648] type=1400 audit(1347777720.556:42): apparmor="DENIED" operation="open" parent=7418 profile="/usr/bin/evince-thumbnailer" name=2F6D656469612F6C6F6C2F6465736B746F702066696C65732F566F6461666F6E652032342E3939 pid=7718 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=0
[ 1595.778321] BUG: unable to handle kernel NULL pointer dereference at 0000000000000319
[ 1595.778327] IP: [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 1595.778335] PGD 7453b067 PUD d1d7067 PMD 0
[ 1595.778338] Oops: 0000 [#1] SMP
[ 1595.778340] last sysfs file: /sys/module/crc_itu_t/initstate
[ 1595.778343] CPU 1
[ 1595.778344] Modules linked in: udf hidp sco bnep rfcomm parport_pc l2cap ppdev binfmt_misc snd_hda_codec_hdmi snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_usb_audio snd_usbmidi_lib snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq fglrx(P) psmouse sp5100_tco uvcvideo lp snd_timer snd_seq_device i2c_piix4 serio_raw parport btusb amd64_edac_mod videodev snd v4l2_compat_ioctl32 edac_core asus_atk0110 snd_page_alloc soundcore edac_mce_amd k8temp bluetooth usbhid firewire_ohci firewire_core hid ahci floppy skge crc_itu_t libahci pata_atiixp
[ 1595.778377]
[ 1595.778379] Pid: 7893, comm: mount Tainted: P 2.6.38-02063808-generic #201106040910 System manufacturer System Product Name/M2R32-MVP
[ 1595.778384] RIP: 0010:[<ffffffff81194c43>] [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 1595.778388] RSP: 0018:ffff88002d1e1cd8 EFLAGS: 00010206
[ 1595.778390] RAX: 0000000000000000 RBX: ffff8800795dd380 RCX: 0000000000000035
[ 1595.778391] RDX: 0000000000000000 RSI: ffff8800795dd3d0 RDI: ffffffff81a02300
[ 1595.778393] RBP: ffff88002d1e1d18 R08: 0000000000000000 R09: 0000000000000000
[ 1595.778395] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800795dd380
[ 1595.778397] R13: ffffffffa05d6000 R14: 0000000000000083 R15: 00000000ffffffe2
[ 1595.778399] FS: 00007fb071bc4800(0000) GS:ffff88007fd00000(0000) knlGS:00007fffffbe8000
[ 1595.778401] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1595.778403] CR2: 0000000000000319 CR3: 000000002a4a8000 CR4: 00000000000006e0
[ 1595.778405] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1595.778407] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1595.778409] Process mount (pid: 7893, threadinfo ffff88002d1e0000, task ffff88001aa3db80)
[ 1595.778410] Stack:
[ 1595.778411] ffff88002d1e1cf8 ffff8800795dd3a0 0000000000000000 ffff8800795dd380
[ 1595.778415] ffffffffa05d6000 0000000000000083 ffff88002406c000 0000000000000000
[ 1595.778418] ffff88002d1e1d48 ffffffff81194e0d ffff88002d1e1d98 ffff88001b736700
[ 1595.778423] Call Trace:
[ 1595.778427] [<ffffffff81194e0d>] blkdev_get_by_path+0x3d/0x90
[ 1595.778431] [<ffffffff81164244>] mount_bdev+0x64/0x210
[ 1595.778437] [<ffffffffa05cf7a0>] ? udf_fill_super+0x0/0x560 [udf]
[ 1595.778441] [<ffffffffa05ccca5>] udf_mount+0x15/0x20 [udf]
[ 1595.778444] [<ffffffff81163489>] vfs_kern_mount+0x89/0x230
[ 1595.778447] [<ffffffff81163723>] do_kern_mount+0x53/0xb0
[ 1595.778451] [<ffffffff8117fdda>] do_new_mount+0x7a/0xb0
[ 1595.778453] [<ffffffff811804a8>] do_mount+0x188/0x1d0
[ 1595.778456] [<ffffffff8118057f>] sys_mount+0x8f/0xd0
[ 1595.778460] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b
[ 1595.778461] Code: 0f 85 c8 00 00 00 48 8d 7b 50 48 c7 43 50 00 00 00 00 31 f6 e8 ff 25 ef ff 48 c7 c7 00 23 a0 81 e8 03 41 ea ff 66 90 48 8b 45 d0 <f6> 80 19 03 00 00 01 74 16 45 85 ff 75 11 41 83 e6 02 74 0b 41
[ 1595.778489] RIP [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 1595.778492] RSP <ffff88002d1e1cd8>
[ 1595.778493] CR2: 0000000000000319
[ 1595.778495] ---[ end trace 3333f63e555601fa ]---
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-55-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.2.0-54-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 6000+ ‖ RAM 3955 MiB ‖ ASUS INC. M2R32-MVP
4 Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570] [1002:6759] {fglrx_pci}
5 eth0: Marvell 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
anapodos
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 400
Εγγραφή: 04 Δεκ 2008, 02:33
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό Learner » 16 Σεπ 2012, 10:04

Το μόνο που βλέπω εγώ , περίεργο (σαν μήνυμα) είναι αυτό :

anapodos έγραψε:
Κώδικας: Επιλογή όλων
[ 100.603320] Pid: 2298, comm: mount Tainted: P 2.6.38-02063808-generic #201106040910 System manufacturer System Product Name/M2R32-MVP


Για κοίτα το PID 2298 που ανήκει ;

Στον ναυτίλο δεν υπάρχει το Cd/Dvd που έχεις μέσα ;
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό anapodos » 16 Σεπ 2012, 10:30

Δεν βλέπω κάποια διεργασία με αριθμό 2298 στο system monitor.
Στον ναυτίλο υπάρχει στη λίστα αριστερά με τα drives απλά δεν γίνεται mount.
Επίσης παρατήρησα πως δεν κάνει eject το dvd-drive. Λές και έχει κλειδώσει ένα πράμα.Πρέπει να κλείσω το pc, να το ανοίξω και μετά να το βγάλω το δισκάκι.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-55-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.2.0-54-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 6000+ ‖ RAM 3955 MiB ‖ ASUS INC. M2R32-MVP
4 Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570] [1002:6759] {fglrx_pci}
5 eth0: Marvell 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
anapodos
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 400
Εγγραφή: 04 Δεκ 2008, 02:33
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό Learner » 16 Σεπ 2012, 10:47

anapodos έγραψε:Επίσης παρατήρησα πως δεν κάνει eject το dvd-drive. Λές και έχει κλειδώσει ένα πράμα.Πρέπει να κλείσω το pc, να το ανοίξω και μετά να το βγάλω το δισκάκι.

Δοκίμασες την εντολή
Κώδικας: Επιλογή όλων
eject


Επίσης τρέξε και αυτές τις 2 εντολές
Κώδικας: Επιλογή όλων
gsettings set org.gnome.desktop.media-handling automount true
gsettings set org.gnome.desktop.media-handling automount-open true


και μετά βάλε πάλι το δισκάκι.

Ερώτηση: Αυτό στο κάνει με όλα τα δισκάκια ή μόνο με το συγκεκριμένο ;
About Me
NickTux@GitHub

Spoiler: show
1. Ubuntu 18.04 LTS
2. Intel Core i3 CPU M 380 2.53GHz ‖ RAM 6GB ‖ Acer Aspire 5733
3. Intel Integrated Graphics [8086:0046] {i915}
4. wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01)
Άβαταρ μέλους
Learner
Συντονιστής
Συντονιστής
 
Δημοσιεύσεις: 9766
Εγγραφή: 08 Νοέμ 2010, 21:24
Τοποθεσία: Αθήνα
Launchpad: nicktux
IRC: NickTux
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό anapodos » 16 Σεπ 2012, 11:18

Η εντολή eject δίνει
Κώδικας: Επιλογή όλων
eject: unable to find or open device for: `cdrom'

Το κάνει με όλα τα δισκάκια που περιέχουν δεδομένα. Σε άδεια dvd και cd λειτουργεί μια χαρά...μάλιστα πετάγεται το παραθυράκι που ρωτάει τι θέλω να κάνω με το άδειο δίσκο. Επίσης γίνεται το eject, όχι με την εντολή όμως αλλά με το πάτημα του κουμπιού.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-55-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.2.0-54-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 6000+ ‖ RAM 3955 MiB ‖ ASUS INC. M2R32-MVP
4 Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570] [1002:6759] {fglrx_pci}
5 eth0: Marvell 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
anapodos
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 400
Εγγραφή: 04 Δεκ 2008, 02:33
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό the_eye » 16 Σεπ 2012, 12:14

Εγώ βλέπω ένα σοβαρότατο kernel panic
Κώδικας: Επιλογή όλων
[ 1595.778321] BUG: unable to handle kernel NULL pointer dereference at 0000000000000319
[ 1595.778327] IP: [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 1595.778335] PGD 7453b067 PUD d1d7067 PMD 0
[ 1595.778338] Oops: 0000 [#1] SMP
[ 1595.778340] last sysfs file: /sys/module/crc_itu_t/initstate
[ 1595.778343] CPU 1
[ 1595.778344] Modules linked in: udf hidp sco bnep rfcomm parport_pc l2cap ppdev binfmt_misc snd_hda_codec_hdmi snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_usb_audio snd_usbmidi_lib snd_hwdep snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq fglrx(P) psmouse sp5100_tco uvcvideo lp snd_timer snd_seq_device i2c_piix4 serio_raw parport btusb amd64_edac_mod videodev snd v4l2_compat_ioctl32 edac_core asus_atk0110 snd_page_alloc soundcore edac_mce_amd k8temp bluetooth usbhid firewire_ohci firewire_core hid ahci floppy skge crc_itu_t libahci pata_atiixp
[ 1595.778377]
[ 1595.778379] Pid: 7893, comm: mount Tainted: P 2.6.38-02063808-generic #201106040910 System manufacturer System Product Name/M2R32-MVP
[ 1595.778384] RIP: 0010:[<ffffffff81194c43>] [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 1595.778388] RSP: 0018:ffff88002d1e1cd8 EFLAGS: 00010206
[ 1595.778390] RAX: 0000000000000000 RBX: ffff8800795dd380 RCX: 0000000000000035
[ 1595.778391] RDX: 0000000000000000 RSI: ffff8800795dd3d0 RDI: ffffffff81a02300
[ 1595.778393] RBP: ffff88002d1e1d18 R08: 0000000000000000 R09: 0000000000000000
[ 1595.778395] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800795dd380
[ 1595.778397] R13: ffffffffa05d6000 R14: 0000000000000083 R15: 00000000ffffffe2
[ 1595.778399] FS: 00007fb071bc4800(0000) GS:ffff88007fd00000(0000) knlGS:00007fffffbe8000
[ 1595.778401] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1595.778403] CR2: 0000000000000319 CR3: 000000002a4a8000 CR4: 00000000000006e0
[ 1595.778405] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1595.778407] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1595.778409] Process mount (pid: 7893, threadinfo ffff88002d1e0000, task ffff88001aa3db80)
[ 1595.778410] Stack:
[ 1595.778411] ffff88002d1e1cf8 ffff8800795dd3a0 0000000000000000 ffff8800795dd380
[ 1595.778415] ffffffffa05d6000 0000000000000083 ffff88002406c000 0000000000000000
[ 1595.778418] ffff88002d1e1d48 ffffffff81194e0d ffff88002d1e1d98 ffff88001b736700
[ 1595.778423] Call Trace:
[ 1595.778427] [<ffffffff81194e0d>] blkdev_get_by_path+0x3d/0x90
[ 1595.778431] [<ffffffff81164244>] mount_bdev+0x64/0x210
[ 1595.778437] [<ffffffffa05cf7a0>] ? udf_fill_super+0x0/0x560 [udf]
[ 1595.778441] [<ffffffffa05ccca5>] udf_mount+0x15/0x20 [udf]
[ 1595.778444] [<ffffffff81163489>] vfs_kern_mount+0x89/0x230
[ 1595.778447] [<ffffffff81163723>] do_kern_mount+0x53/0xb0
[ 1595.778451] [<ffffffff8117fdda>] do_new_mount+0x7a/0xb0
[ 1595.778453] [<ffffffff811804a8>] do_mount+0x188/0x1d0
[ 1595.778456] [<ffffffff8118057f>] sys_mount+0x8f/0xd0
[ 1595.778460] [<ffffffff8100c002>] system_call_fastpath+0x16/0x1b
[ 1595.778461] Code: 0f 85 c8 00 00 00 48 8d 7b 50 48 c7 43 50 00 00 00 00 31 f6 e8 ff 25 ef ff 48 c7 c7 00 23 a0 81 e8 03 41 ea ff 66 90 48 8b 45 d0 <f6> 80 19 03 00 00 01 74 16 45 85 ff 75 11 41 83 e6 02 74 0b 41
[ 1595.778489] RIP [<ffffffff81194c43>] blkdev_get+0x103/0x1b0
[ 1595.778492] RSP <ffff88002d1e1cd8>
[ 1595.778493] CR2: 0000000000000319
[ 1595.778495] ---[ end trace 3333f63e555601fa ]---


Έχεις βάλει κάποιον custom kernel ;
Δώσε το αποτέλεσμα της
Κώδικας: Επιλογή όλων
uname -a
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11723
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό anapodos » 16 Σεπ 2012, 12:17

Κώδικας: Επιλογή όλων
Linux kostas-home 2.6.38-02063808-generic #201106040910 SMP Sat Jun 4 09:13:01 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux

Τον είχα βάλει γιατί είχα ένα συγκεκριμένο πρόβλημα με τo μικρόφωνο της webcamera
Θα δοκιμάσω σε νεότερο πυρήνα να σας πω αποτελέσματα.
1 Γνώσεις Linux: Ικανοποιητικό ┃ Προγραμματισμού: Πρώτα βήματα ┃ Αγγλικών: Πολύ καλό
2 Ubuntu 12.04 precise 3.2.0-55-generic 64bit (en_US.UTF-8, Unity ubuntu), Ubuntu 3.2.0-54-generic, Windows 7
3 AMD Athlon 64 X2 Dual Core Processor 6000+ ‖ RAM 3955 MiB ‖ ASUS INC. M2R32-MVP
4 Advanced Micro Devices, Inc. [AMD/ATI] Turks PRO [Radeon HD 6570/7570] [1002:6759] {fglrx_pci}
5 eth0: Marvell 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
anapodos
dudeTUX
dudeTUX
 
Δημοσιεύσεις: 400
Εγγραφή: 04 Δεκ 2008, 02:33
Εκτύπωση

Re: Δεν κάνει mount το dvd

Δημοσίευσηαπό the_eye » 16 Σεπ 2012, 12:35

anapodos έγραψε:Linux kostas-home 2.6.38-02063808-generic


Ο 2.6 είναι πολύ παλιός πυρήνας σε 12.04 θα έπρεπε να έχεις 3.2.

Για το μηχάνημα της υπογραφής σου δεν συζητάμε ;
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11723
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση


Επιστροφή στο Περιφερειακά