Πρόβλημα κινητού με υπολογιστή

[ΜΑΡΙΑ]

ΕΔΩ ΚΑΙ ΜΕΡΕΣ ΠΡΟΣΠΑΘΩ ΝΑ ΒΓΑΛΩ ΑΚΡΗ ΜΕ ΤΟ ΚΙΝΗΤΟ ΜΟΥ ΤΟ ΟΠΟΙΟ ΕΙΝΑΙ (SONY ERICSSON T700). ΤΟ ΕΧΩ ΣΥΝΔΕΣΕΙ ΜΕ ΚΑΛΩΔΙΟ USB KAI ΔΕΝ ΑΝΑΓΝΩΡΙΖΕΤΑΙ ΑΠΟ ΤΟ ΣΤΑΘΕΡΟ ΜΟΥ ΥΠΟΛΟΓΙΣΤΗ. ΟΤΑΝ ΣΥΝΔΕΩ ΤΟ USB ME TO KINHTO MOY ΒΓΑΖΕΙ ΛΕΙΤΟΥΡΓΙΕΣ USB ΟΠΩΣ:ΛΕΙΤ.ΤΗΛΕΦΩΝΟΥ, ΜΕΤΑΦΟΡΑ ΠΟΛΥΜΕΣΩΝ,ΕΚΤΥΠΩΣΗ, ΜΑΖΙΚΗ ΑΠΟΘ. ΕΧΩ ΚΑΝΕΙ ΟΛΕΣ ΤΙΣ ΕΠΙΛΟΓΕΣ ΑΛΛΑ ΣΤΟΝ ΥΠΟΛΟΓΙΣΤΗ ΔΕΝ ΦΑΙΝΕΤΑΙ ΤΙΠΟΤΑ...ΕΠΙΣΗΣ ΟΤΑΝ ΕΠΙΛΕΓΩ ΜΑΖΙΚΗ ΑΠΟΘΗΚΕΥΣΗ ΜΟΥ ΚΛΕΙΝΕΙ Η ΣΥΣΚΕΥΗ ΤΟΥ ΚΙΝΗΤΟΥ...ΚΑΤΕΒΑΣΑ ΔΙΑΦΟΡΑ ΠΡΟΓΡΑΜΜΑΤΑ ΜΗΠΩΣ ΚΑΙ ΤΟ ΑΝΑΓΝΩΡΙΣΕΙ ΑΛΛΑ ΤΖΙΦΟΣ... ΔΕΝ ΞΕΡΩ ΤΙ ΑΛΛΑ ΝΑ ΚΑΝΩ...ΕΙΜΑΙ ΚΑΙ ΛΙΓΟ ΑΣΧΕΤΗ ΜΕ LINUX ΚΑΙ ΠΡΟΣΠΑΘΩ ΠΟΛΥ ΓΙΑ ΝΑ ΒΓΑΛΩ ΑΚΡΗ...ΜΙΑ ΒΟΗΘΕΙΑ ΒΡΕ ΠΑΙΔΙΑ...

[eliasps]

Kαλησπέρα και καλώς όρισες στο forum.

Kαταρχάς, είναι σημαντική η προσάρτηση της υπογραφής σου στο forum, με τα χαρακτηριστικά του συστήματός σου, για την παροχή πληροφοριών υλικού, καθώς για το λειτουργικό σύστημα που χρησιμοποιείς (έκδοση, kernel κλπ).
Για να φτιάξεις την υπογραφή σου, ακολούθησε τα βήματα αυτού του οδηγού: Ubuntu-gr αυτόματη υπογραφή φόρουμ [python]

Δοκίμασε να συνδέσεις το κινητό στον υπολογιστή με το USB και όσο είναι συνδεδεμένο, άνοιξε το τερματικό, εκτέλεσε μία μία τις παρακάτω εντολές, κάνε αντιγραφή τα αποτελέσματα που θα σου εμφανίσουν και επικόλληση εδώ:

Κώδικας: Επιλογή όλων

lsusb
sudo fdisk -l


Bάλε τα αποτελέσματα σε [cοde] για να εμφανιστούν έτσι (μέσα σε κώδικα):

Κώδικας: Επιλογή όλων

[code]αποτελέσματα[/code]

[Learner]

Καλώς ήλθες στο φόρουμ

!

Μήνυμα ενημέρωσης προς τον/την ΜΑΡΙΑ Σε παρακαλούμε να διαβάσεις τις οδηγίες προς νεοεισερχόμενους προσεκτικά. Είναι σημαντική η προσάρτηση της υπογραφής με τα χαρακτηριστικά του υπολογιστή σου hardware id (πχ [10ec:8168]), έτσι ώστε να δίνονται συγκεκριμένες πληροφορίες όταν πρόκειται για επίλυση ενός προβλήματός σου. Οι αλλαγές μπορούν να γίνουν από τον πίνακα ελέγχου αλλά και με το αυτόματο script που θα το βρεις παρακάτω. Αυτόματο script υπογραφής

Όλες οι δημοσιεύσεις : πρέπει να είναι σε λιτά πεζά ελληνικά => Oδηγίες προς νεοεισερχόμενους σε forum ή linux

Το θέμα μεταφέρθηκε από Λειτουργικό Σύστημα σε Περιφερειακά

[lepidas]

Στο μενου του τηλεφωνου καπου εχει usb debuging, επέλεξε το

[ΜΑΡΙΑ]

Kαλησπέρα και καλώς όρισες στο forum.

Kαταρχάς, είναι σημαντική η προσάρτηση της υπογραφής σου στο forum, με τα χαρακτηριστικά του συστήματός σου, για την παροχή πληροφοριών υλικού, καθώς για το λειτουργικό σύστημα που χρησιμοποιείς (έκδοση, kernel κλπ).
Για να φτιάξεις την υπογραφή σου, ακολούθησε τα βήματα αυτού του οδηγού: Ubuntu-gr αυτόματη υπογραφή φόρουμ [python]

Δοκίμασε να συνδέσεις το κινητό στον υπολογιστή με το USB και όσο είναι συνδεδεμένο, άνοιξε το τερματικό, εκτέλεσε μία μία τις παρακάτω εντολές, κάνε αντιγραφή τα αποτελέσματα που θα σου εμφανίσουν και επικόλληση εδώ:

Κώδικας: Επιλογή όλων

lsusb
sudo fdisk -l


Bάλε τα αποτελέσματα σε [cοde] για να εμφανιστούν έτσι (μέσα σε κώδικα):

Κώδικας: Επιλογή όλων

[code]αποτελέσματα[/code]

Κώδικας: Επιλογή όλων

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 046d:0819 Logitech, Inc. Webcam C210
Bus 002 Device 002: ID 045e:0053 Microsoft Corp. Optical Mouse


Κώδικας: Επιλογή όλων

Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000ddc8d

Device Boot Start End Blocks Id System
/dev/sda1 * 2048 224827391 112412672 83 Linux
/dev/sda2 224829438 234440703 4805633 5 Extended
/dev/sda5 224829440 234440703 4805632 82 Linux swap / Solaris

[ΜΑΡΙΑ]

ΠΡΟΣΠΑΘΗΣΑ ΝΑ ΒΡΩ ΠΩΣ ΝΑ ΒΑΛΟΥΜΕ ΤΑ ΑΠΟΤΕΛΕΣΜΑΤΑ ΣΕ [code]...ΚΑΤΙ ΚΑΤΑΦΕΡΑ ΝΟΜΙΖΩ...ΠΙΣΤΕΥΩ ΝΑ ΚΑΤΑΛΑΒΕΤΕ...

[eliasps]

ΠΡΟΣΠΑΘΗΣΑ ΝΑ ΒΡΩ ΠΩΣ ΝΑ ΒΑΛΟΥΜΕ ΤΑ ΑΠΟΤΕΛΕΣΜΑΤΑ ΣΕ [cοde]...ΚΑΤΙ ΚΑΤΑΦΕΡΑ ΝΟΜΙΖΩ...ΠΙΣΤΕΥΩ ΝΑ ΚΑΤΑΛΑΒΕΤΕ...

Επιλέγεις το κείμενο (που θες να βάλεις σε κώδικα) με το ποντίκι και πατάς το 9ο κουμπί με τα <> που είναι ακριβώς πάνω από το πεδίο που πληκτρολογείς την απάντηση.

Στα αποτελέσματα των εντολών δεν υπάρχει κάποια αναφορά στο κινητό.
Είχες επιλέξει "Μαζική αποθήκευση" όταν τις εκτέλεσες;
Αν όχι, τότε εκτέλεσέ τες ξανά, αφού έχεις επιλέξει "Μαζική αποθήκευση" στο κινητό, όταν το σύνδεσες στον υπολογιστή.
Αν το είχες επιλέξει, τότε αποσύνδεσε το κινητό από τον υπολογιστή, περίμενε πέντε δευτερόλεπτα και σύνδεσέ το ξανά (επέλεξε πάλι "Μαζική αποθήκευση").
Αφού το κάνεις, άνοιξε το τερματικό και εκτέλεσε την εντολή:

Κώδικας: Επιλογή όλων

dmesg > dmesg.txt

Με αυτήν την εντολή, θα δημιουργηθεί ένα αρχείο κειμένου με όνομα "dmesg.txt" στον προσωπικό σου φάκελο, που θα περιέχει μηνύματα από τον πυρήνα του Ubuntu. Άνοιξέ το, αντέγραψε όλο το περιεχόμενό του (θα είναι αρκετά μεγάλο) και κάνε επικόλληση τα αποτελέσματα εδώ (πάλι μέσα σε κώδικα), για να δούμε αν εμφανίζεται μήνυμα στον πυρήνα του υπολογιστή, που να αφορά την σύνδεση με το κινητό.

[ALdaperan]

Τον κώδικα τον βάζουμε μέσα σε [cοde]κώδικας[/cοde]. Επιλέγουμε το κείμενο και πατάμε το κουμπάκι .

Μην γράφεις με κεφαλαία ! Πάτα το κουμπί Caps Lock μια φορά στο πληκτρολόγιο σου !

[ΜΑΡΙΑ]

Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-33-generic (buildd@lamiak) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #52-Ubuntu SMP Thu Oct 18 16:19:45 UTC 2012 (Ubuntu 3.2.0-33.52-generic 3.2.31)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f2000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled in hardware: non-PAE kernel!
[ 0.000000] NX (Execute Disable) protection: approximated by x86 segment limits
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: System manufacturer System Product Name/P5N-MX, BIOS ASUS P5N-MX ACPI BIOS Revision 0202 12/17/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CDFFF write-protect
[ 0.000000] CE000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 2047M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 2M num_reg: 2 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2047MB, range: 1MB, type UC
[ 0.000000] found SMP MP-table at [c00f5190] f5190
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 3599c000 - 36cc6000
[ 0.000000] ACPI: RSDP 000f6ca0 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 7fef30c0 0004C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 7fef8740 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 7fef3240 054A7 (v01 NVIDIA ASUSACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7fef0000 00040
[ 0.000000] ACPI: HPET 7fef8980 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 7fef8a00 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 7fef8880 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 7fef8f60 00304 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1158MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c1825580, node_mem_map f499c200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2318 pages used for memmap
[ 0.000000] HighMem zone: 294372 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfeff0000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7ff00000 (gap: 7ff00000:70100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f77bd000 s31616 r0 d21632 u53248
[ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519809
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-33-generic root=UUID=c11581b0-b5c5-4a31-8fcf-93c6dbcb6777 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 8384000 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007fef0)
[ 0.000000] Memory: 2040336k/2096064k available (5621k kernel code, 55276k reserved, 2769k data, 712k init, 1186760k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1832000 - 0xc18e4000 ( 712 kB)
[ 0.000000] .data : 0xc157d644 - 0xc1831c80 (2769 kB)
[ 0.000000] .text : 0xc1000000 - 0xc157d644 (5621 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f440a000 soft=f440c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2999.979 MHz processor.
[ 0.016010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.95 BogoMIPS (lpj=11999916)
[ 0.016026] pid_max: default: 32768 minimum: 301
[ 0.016115] Security Framework initialized
[ 0.016174] AppArmor: AppArmor initialized
[ 0.016183] Yama: becoming mindful.
[ 0.016396] Mount-cache hash table entries: 512
[ 0.016885] Initializing cgroup subsys cpuacct
[ 0.016907] Initializing cgroup subsys memory
[ 0.016938] Initializing cgroup subsys devices
[ 0.016947] Initializing cgroup subsys freezer
[ 0.016957] Initializing cgroup subsys blkio
[ 0.016984] Initializing cgroup subsys perf_event
[ 0.017094] CPU: Physical Processor ID: 0
[ 0.017104] CPU: Processor Core ID: 0
[ 0.017115] mce: CPU supports 4 MCE banks
[ 0.017151] CPU0: Thermal monitoring enabled (TM1)
[ 0.017166] using mwait in idle threads.
[ 0.025516] ACPI: Core revision 20110623
[ 0.044102] ftrace: allocating 25915 entries in 51 pages
[ 0.048175] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048995] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091841] CPU0: Intel(R) Pentium(R) D CPU 3.00GHz stepping 04
[ 0.092004] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[ 0.092004] ... version: 0
[ 0.092004] ... bit width: 40
[ 0.092004] ... generic registers: 18
[ 0.092004] ... value mask: 000000ffffffffff
[ 0.092004] ... max period: 0000007fffffffff
[ 0.092004] ... fixed-purpose events: 0
[ 0.092004] ... event mask: 000000000003ffff
[ 0.092004] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.092004] CPU 1 irqstacks, hard=f44d2000 soft=f44d4000
[ 0.092004] Booting Node 0, Processors #1
[ 0.092004] smpboot cpu 1: start_ip = 9b000
[ 0.020001] Initializing CPU#1
[ 0.184099] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.184219] Brought up 2 CPUs
[ 0.184233] Total of 2 processors activated (12001.31 BogoMIPS).
[ 0.186006] devtmpfs: initialized
[ 0.186006] EVM: security.selinux
[ 0.186006] EVM: security.SMACK64
[ 0.186006] EVM: security.capability
[ 0.186006] PM: Registering ACPI NVS region at 7fef0000 (12288 bytes)
[ 0.191993] print_constraints: dummy:
[ 0.192125] RTC time: 6:53:11, date: 11/20/12
[ 0.192271] NET: Registered protocol family 16
[ 0.192627] Trying to unpack rootfs image as initramfs...
[ 0.201599] EISA bus registered
[ 0.201744] ACPI: bus type pci registered
[ 0.202025] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
[ 0.202040] PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
[ 0.202047] PCI: Using MMCONFIG for extended config space
[ 0.202056] PCI: Using configuration type 1 for base access
[ 0.216500] bio: create slab <bio-0> at 0
[ 0.216900] ACPI: Added _OSI(Module Device)
[ 0.216914] ACPI: Added _OSI(Processor Device)
[ 0.216924] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.216931] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.223287] ACPI: EC: Look up EC in DSDT
[ 0.257568] ACPI: SSDT 7fef8a80 00175 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.259072] ACPI: Dynamic OEM Table Load:
[ 0.259088] ACPI: SSDT (null) 00175 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.259560] ACPI: SSDT 7fef8e90 000CE (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.261049] ACPI: Dynamic OEM Table Load:
[ 0.261061] ACPI: SSDT (null) 000CE (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.261998] ACPI: Interpreter enabled
[ 0.262044] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.262138] ACPI: Using IOAPIC for interrupt routing
[ 0.323495] ACPI: No dock devices found.
[ 0.323506] HEST: Table not found.
[ 0.323530] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.324227] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.324696] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.324711] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.324721] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.324732] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.324742] pci_root PNP0A08:00: host bridge window [mem 0x7ff00000-0xfebfffff] (ignored)
[ 0.324796] pci 0000:00:00.0: [10de:07c3] type 0 class 0x000600
[ 0.325063] pci 0000:00:00.1: [10de:07cb] type 0 class 0x000500
[ 0.325459] pci 0000:00:01.0: [10de:07cd] type 0 class 0x000500
[ 0.325832] pci 0000:00:01.1: [10de:07ce] type 0 class 0x000500
[ 0.326206] pci 0000:00:01.2: [10de:07cf] type 0 class 0x000500
[ 0.326580] pci 0000:00:01.3: [10de:07d0] type 0 class 0x000500
[ 0.326954] pci 0000:00:01.4: [10de:07d1] type 0 class 0x000500
[ 0.327327] pci 0000:00:01.5: [10de:07d2] type 0 class 0x000500
[ 0.327697] pci 0000:00:01.6: [10de:07d3] type 0 class 0x000500
[ 0.337137] pci 0000:00:02.0: [10de:07d6] type 0 class 0x000500
[ 0.337535] pci 0000:00:03.0: [10de:07d7] type 0 class 0x000601
[ 0.337734] pci 0000:00:03.1: [10de:07d8] type 0 class 0x000c05
[ 0.337786] pci 0000:00:03.1: reg 10: [io 0xfc00-0xfc3f]
[ 0.337868] pci 0000:00:03.1: reg 20: [io 0x1c00-0x1c3f]
[ 0.337895] pci 0000:00:03.1: reg 24: [io 0x1c80-0x1cbf]
[ 0.338007] pci 0000:00:03.1: PME# supported from D3hot D3cold
[ 0.338028] pci 0000:00:03.1: PME# disabled
[ 0.338071] pci 0000:00:03.2: [10de:07d9] type 0 class 0x000500
[ 0.338289] pci 0000:00:03.4: [10de:07c8] type 0 class 0x000500
[ 0.338674] pci 0000:00:04.0: [10de:07fe] type 0 class 0x000c03
[ 0.338721] pci 0000:00:04.0: reg 10: [mem 0xeffff000-0xefffffff]
[ 0.338898] pci 0000:00:04.0: supports D1 D2
[ 0.338908] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.338923] pci 0000:00:04.0: PME# disabled
[ 0.338973] pci 0000:00:04.1: [10de:056a] type 0 class 0x000c03
[ 0.339025] pci 0000:00:04.1: reg 10: [mem 0xefffe000-0xefffe0ff]
[ 0.339231] pci 0000:00:04.1: supports D1 D2
[ 0.339240] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.339255] pci 0000:00:04.1: PME# disabled
[ 0.339341] pci 0000:00:08.0: [10de:056c] type 0 class 0x000101
[ 0.339455] pci 0000:00:08.0: reg 20: [io 0xf000-0xf00f]
[ 0.339607] pci 0000:00:09.0: [10de:07fc] type 0 class 0x000403
[ 0.339659] pci 0000:00:09.0: reg 10: [mem 0xefff4000-0xefff7fff]
[ 0.339862] pci 0000:00:09.0: PME# supported from D3hot D3cold
[ 0.339877] pci 0000:00:09.0: PME# disabled
[ 0.339925] pci 0000:00:0a.0: [10de:056d] type 1 class 0x000604
[ 0.340146] pci 0000:00:0b.0: [10de:056e] type 1 class 0x000604
[ 0.340318] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340333] pci 0000:00:0b.0: PME# disabled
[ 0.340405] pci 0000:00:0c.0: [10de:056f] type 1 class 0x000604
[ 0.340573] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340588] pci 0000:00:0c.0: PME# disabled
[ 0.340656] pci 0000:00:0d.0: [10de:056f] type 1 class 0x000604
[ 0.340827] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.340839] pci 0000:00:0d.0: PME# disabled
[ 0.340905] pci 0000:00:0e.0: [10de:07f0] type 0 class 0x000101
[ 0.340956] pci 0000:00:0e.0: reg 10: [io 0x09f0-0x09f7]
[ 0.340979] pci 0000:00:0e.0: reg 14: [io 0x0bf0-0x0bf3]
[ 0.341004] pci 0000:00:0e.0: reg 18: [io 0x0970-0x0977]
[ 0.341029] pci 0000:00:0e.0: reg 1c: [io 0x0b70-0x0b73]
[ 0.341051] pci 0000:00:0e.0: reg 20: [io 0xdc00-0xdc0f]
[ 0.341077] pci 0000:00:0e.0: reg 24: [mem 0xefff8000-0xefff9fff]
[ 0.341244] pci 0000:00:0f.0: [10de:07dc] type 0 class 0x000200
[ 0.341295] pci 0000:00:0f.0: reg 10: [mem 0xefffd000-0xefffdfff]
[ 0.341321] pci 0000:00:0f.0: reg 14: [io 0xd800-0xd807]
[ 0.341347] pci 0000:00:0f.0: reg 18: [mem 0xefffc000-0xefffc0ff]
[ 0.341372] pci 0000:00:0f.0: reg 1c: [mem 0xefffb000-0xefffb00f]
[ 0.341512] pci 0000:00:0f.0: supports D1 D2
[ 0.341522] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.341537] pci 0000:00:0f.0: PME# disabled
[ 0.341745] pci 0000:01:07.0: [1106:3044] type 0 class 0x000c00
[ 0.341796] pci 0000:01:07.0: reg 10: [mem 0xefbff000-0xefbff7ff]
[ 0.341828] pci 0000:01:07.0: reg 14: [io 0xac00-0xac7f]
[ 0.342008] pci 0000:01:07.0: supports D2
[ 0.342018] pci 0000:01:07.0: PME# supported from D2 D3hot D3cold
[ 0.342034] pci 0000:01:07.0: PME# disabled
[ 0.342145] pci 0000:00:0a.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.342160] pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
[ 0.342172] pci 0000:00:0a.0: bridge window [mem 0xefb00000-0xefbfffff]
[ 0.342188] pci 0000:00:0a.0: bridge window [mem 0xefa00000-0xefafffff pref]
[ 0.342202] pci 0000:00:0a.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.342212] pci 0000:00:0a.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.342364] pci 0000:02:00.0: [1002:5d4f] type 0 class 0x000300
[ 0.342418] pci 0000:02:00.0: reg 10: [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 0.342458] pci 0000:02:00.0: reg 18: [mem 0xef9f0000-0xef9fffff 64bit]
[ 0.342489] pci 0000:02:00.0: reg 20: [io 0x9c00-0x9cff]
[ 0.342538] pci 0000:02:00.0: reg 30: [mem 0xef9c0000-0xef9dffff pref]
[ 0.342652] pci 0000:02:00.0: supports D1 D2
[ 0.342727] pci 0000:02:00.1: [1002:5d6f] type 0 class 0x000380
[ 0.342776] pci 0000:02:00.1: reg 10: [mem 0xef9e0000-0xef9effff 64bit]
[ 0.342968] pci 0000:02:00.1: supports D1 D2
[ 0.343021] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.343054] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.343073] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.343085] pci 0000:00:0b.0: bridge window [mem 0xef900000-0xef9fffff]
[ 0.343105] pci 0000:00:0b.0: bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 0.343220] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.343236] pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff]
[ 0.343251] pci 0000:00:0c.0: bridge window [mem 0xef800000-0xef8fffff]
[ 0.343267] pci 0000:00:0c.0: bridge window [mem 0xefe00000-0xefefffff 64bit pref]
[ 0.343382] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.343401] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff]
[ 0.343413] pci 0000:00:0d.0: bridge window [mem 0xefd00000-0xefdfffff]
[ 0.343432] pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff 64bit pref]
[ 0.343480] pci_bus 0000:00: on NUMA node 0
[ 0.343500] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.353099] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.353969] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.354640] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 0.354650] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.594206] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.594447] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.594674] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.594908] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
[ 0.595130] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.595358] ACPI: PCI Interrupt Link [LNK6] (IRQs *5 7 9 10 11 14 15)
[ 0.595581] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.595805] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596057] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596284] ACPI: PCI Interrupt Link [LIGP] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.596517] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.596741] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 0.596989] ACPI: PCI Interrupt Link [LU1B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.597209] ACPI: PCI Interrupt Link [LU2B] (IRQs 5 7 9 10 11 14 15) *0
[ 0.597440] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 11 14 *15)
[ 0.597673] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 *11 14 15)
[ 0.597892] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.598120] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.598354] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.598597] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
[ 0.598980] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.599316] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.599652] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.599984] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.608584] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.608934] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.609276] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.609612] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.609949] ACPI: PCI Interrupt Link [AIGP] (IRQs 20 21 22 23) *0, disabled.
[ 0.610295] ACPI: PCI Interrupt Link [AUBA] (IRQs 20 21 22 23) *0
[ 0.610638] ACPI: PCI Interrupt Link [AUB2] (IRQs 20 21 22 23) *0
[ 0.610983] ACPI: PCI Interrupt Link [AU1B] (IRQs 20 21 22 23) *0
[ 0.611325] ACPI: PCI Interrupt Link [AU2B] (IRQs 20 21 22 23) *0
[ 0.611668] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.612013] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.612388] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.612726] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.613067] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.613413] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.613755] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.624235] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.624254] vgaarb: loaded
[ 0.624260] vgaarb: bridge control possible 0000:02:00.0
[ 0.624793] i2c-core: driver [aat2870] using legacy suspend method
[ 0.624803] i2c-core: driver [aat2870] using legacy resume method
[ 0.625170] SCSI subsystem initialized
[ 0.625394] libata version 3.00 loaded.
[ 0.625605] usbcore: registered new interface driver usbfs
[ 0.625658] usbcore: registered new interface driver hub
[ 0.625789] usbcore: registered new device driver usb
[ 0.626212] PCI: Using ACPI for IRQ routing
[ 0.628689] PCI: pci_cache_line_size set to 64 bytes
[ 0.629058] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 0.629072] reserve RAM buffer: 000000007fef0000 - 000000007fffffff
[ 0.629497] NetLabel: Initializing
[ 0.629507] NetLabel: domain hash size = 128
[ 0.629512] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.629558] NetLabel: unlabeled traffic allowed by default
[ 0.636961] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.636983] hpet0: at MMIO 0xfeff0000, IRQs 2, 8, 31
[ 0.637008] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.640544] Switching to clocksource hpet
[ 0.699174] AppArmor: AppArmor Filesystem Enabled
[ 0.699283] pnp: PnP ACPI init
[ 0.699356] ACPI: bus type pnp registered
[ 0.699734] pnp 00:00: [bus 00-ff]
[ 0.699745] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.699756] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.699766] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.699776] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.699786] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.699802] pnp 00:00: [mem 0x7ff00000-0xfebfffff window]
[ 0.700121] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.700555] pnp 00:01: [io 0x1000-0x107f]
[ 0.700566] pnp 00:01: [io 0x1080-0x10ff]
[ 0.700572] pnp 00:01: [io 0x1400-0x147f]
[ 0.700582] pnp 00:01: [io 0x1480-0x14ff]
[ 0.700591] pnp 00:01: [io 0x1800-0x187f]
[ 0.700598] pnp 00:01: [io 0x1880-0x18ff]
[ 0.700607] pnp 00:01: [mem 0xfec80000-0xfecbffff]
[ 0.700614] pnp 00:01: [mem 0xfefe0000-0xfefe01ff]
[ 0.700623] pnp 00:01: [mem 0xfefe1000-0xfefe10ff]
[ 0.700633] pnp 00:01: [mem 0x00000000-0xffffffff disabled]
[ 0.700893] system 00:01: [io 0x1000-0x107f] has been reserved
[ 0.700907] system 00:01: [io 0x1080-0x10ff] has been reserved
[ 0.700917] system 00:01: [io 0x1400-0x147f] has been reserved
[ 0.700928] system 00:01: [io 0x1480-0x14ff] has been reserved
[ 0.700938] system 00:01: [io 0x1800-0x187f] has been reserved
[ 0.700948] system 00:01: [io 0x1880-0x18ff] has been reserved
[ 0.700960] system 00:01: [mem 0xfec80000-0xfecbffff] has been reserved
[ 0.700970] system 00:01: [mem 0xfefe0000-0xfefe01ff] has been reserved
[ 0.700984] system 00:01: [mem 0xfefe1000-0xfefe10ff] has been reserved
[ 0.700996] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.701228] pnp 00:02: [io 0x0010-0x001f]
[ 0.701239] pnp 00:02: [io 0x0022-0x003f]
[ 0.701248] pnp 00:02: [io 0x0044-0x005f]
[ 0.701258] pnp 00:02: [io 0x0062-0x0063]
[ 0.701264] pnp 00:02: [io 0x0065-0x006f]
[ 0.701273] pnp 00:02: [io 0x0074-0x007f]
[ 0.701279] pnp 00:02: [io 0x0091-0x0093]
[ 0.701289] pnp 00:02: [io 0x00a2-0x00bf]
[ 0.701295] pnp 00:02: [io 0x00e0-0x00ef]
[ 0.701304] pnp 00:02: [io 0x0b78-0x0b7b]
[ 0.701311] pnp 00:02: [io 0x0f78-0x0f7b]
[ 0.701320] pnp 00:02: [io 0x0a78-0x0a7b]
[ 0.701329] pnp 00:02: [io 0x0e78-0x0e7b]
[ 0.701336] pnp 00:02: [io 0x0bbc-0x0bbf]
[ 0.701345] pnp 00:02: [io 0x0fbc-0x0fbf]
[ 0.701351] pnp 00:02: [io 0x04d0-0x04d1]
[ 0.701361] pnp 00:02: [io 0x0294-0x0297]
[ 0.701367] pnp 00:02: [io 0x0295-0x0296]
[ 0.701376] pnp 00:02: [io 0x0880-0x088f]
[ 0.701651] system 00:02: [io 0x0b78-0x0b7b] has been reserved
[ 0.701662] system 00:02: [io 0x0f78-0x0f7b] has been reserved
[ 0.701673] system 00:02: [io 0x0a78-0x0a7b] has been reserved
[ 0.701683] system 00:02: [io 0x0e78-0x0e7b] has been reserved
[ 0.701693] system 00:02: [io 0x0bbc-0x0bbf] has been reserved
[ 0.701707] system 00:02: [io 0x0fbc-0x0fbf] has been reserved
[ 0.701729] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.701740] system 00:02: [io 0x0294-0x0297] has been reserved
[ 0.701750] system 00:02: [io 0x0295-0x0296] has been reserved
[ 0.701760] system 00:02: [io 0x0880-0x088f] has been reserved
[ 0.701775] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.701827] pnp 00:03: [dma 4]
[ 0.701837] pnp 00:03: [io 0x0000-0x000f]
[ 0.701847] pnp 00:03: [io 0x0080-0x0090]
[ 0.701853] pnp 00:03: [io 0x0094-0x009f]
[ 0.701863] pnp 00:03: [io 0x00c0-0x00df]
[ 0.702009] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.702216] pnp 00:04: [irq 0 disabled]
[ 0.702258] pnp 00:04: [irq 8]
[ 0.702268] pnp 00:04: [mem 0xfeff0000-0xfeff03ff]
[ 0.702417] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.702530] pnp 00:05: [io 0x0070-0x0073]
[ 0.702676] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.702721] pnp 00:06: [io 0x0061]
[ 0.702876] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.702918] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.702942] pnp 00:07: [irq 13]
[ 0.703093] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.703509] pnp 00:08: [io 0x03f0-0x03f5]
[ 0.703519] pnp 00:08: [io 0x03f7]
[ 0.703540] pnp 00:08: [irq 6]
[ 0.703547] pnp 00:08: [dma 2]
[ 0.703753] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.713727] pnp 00:09: [io 0x03f8-0x03ff]
[ 0.713763] pnp 00:09: [irq 4]
[ 0.714095] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.715265] pnp 00:0a: [io 0x0378-0x037f]
[ 0.715276] pnp 00:0a: [io 0x0778-0x077b]
[ 0.715297] pnp 00:0a: [irq 7]
[ 0.715303] pnp 00:0a: [dma 3]
[ 0.715582] pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.715753] pnp 00:0b: [io 0x0060]
[ 0.715763] pnp 00:0b: [io 0x0064]
[ 0.715784] pnp 00:0b: [irq 1]
[ 0.715992] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.718867] pnp 00:0c: [mem 0xf0000000-0xf1ffffff]
[ 0.719207] system 00:0c: [mem 0xf0000000-0xf1ffffff] has been reserved
[ 0.719222] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.719663] pnp 00:0d: [mem 0x000d0000-0x000d3fff]
[ 0.719673] pnp 00:0d: [mem 0x000f0000-0x000f7fff]
[ 0.719683] pnp 00:0d: [mem 0x000f8000-0x000fbfff]
[ 0.719692] pnp 00:0d: [mem 0x000fc000-0x000fffff]
[ 0.719699] pnp 00:0d: [mem 0xfeff0000-0xfeff00ff]
[ 0.719709] pnp 00:0d: [mem 0x7fef0000-0x7fefffff]
[ 0.719718] pnp 00:0d: [mem 0xffff0000-0xffffffff]
[ 0.719725] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.719734] pnp 00:0d: [mem 0x00100000-0x7feeffff]
[ 0.719744] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.719750] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.719760] pnp 00:0d: [mem 0xfeff0000-0xfeff03ff]
[ 0.728179] system 00:0d: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.728195] system 00:0d: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.728209] system 00:0d: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.728220] system 00:0d: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.728235] system 00:0d: [mem 0xfeff0000-0xfeff00ff] has been reserved
[ 0.728246] system 00:0d: [mem 0x7fef0000-0x7fefffff] could not be reserved
[ 0.728257] system 00:0d: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.728272] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.728287] system 00:0d: [mem 0x00100000-0x7feeffff] could not be reserved
[ 0.728298] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.728309] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.728322] system 00:0d: [mem 0xfeff0000-0xfeff03ff] could not be reserved
[ 0.728338] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.728384] pnp: PnP ACPI: found 14 devices
[ 0.728390] ACPI: ACPI bus type pnp unregistered
[ 0.728406] PnPBIOS: Disabled by ACPI PNP
[ 0.832170] PCI: max bus depth: 1 pci_try_num: 2
[ 0.832268] pci 0000:00:0a.0: PCI bridge to [bus 01-01]
[ 0.832284] pci 0000:00:0a.0: bridge window [io 0xa000-0xafff]
[ 0.832301] pci 0000:00:0a.0: bridge window [mem 0xefb00000-0xefbfffff]
[ 0.832320] pci 0000:00:0a.0: bridge window [mem 0xefa00000-0xefafffff pref]
[ 0.832342] pci 0000:00:0b.0: PCI bridge to [bus 02-02]
[ 0.832353] pci 0000:00:0b.0: bridge window [io 0x9000-0x9fff]
[ 0.832368] pci 0000:00:0b.0: bridge window [mem 0xef900000-0xef9fffff]
[ 0.832383] pci 0000:00:0b.0: bridge window [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 0.832399] pci 0000:00:0c.0: PCI bridge to [bus 03-03]
[ 0.832410] pci 0000:00:0c.0: bridge window [io 0xc000-0xcfff]
[ 0.832425] pci 0000:00:0c.0: bridge window [mem 0xef800000-0xef8fffff]
[ 0.832440] pci 0000:00:0c.0: bridge window [mem 0xefe00000-0xefefffff 64bit pref]
[ 0.832456] pci 0000:00:0d.0: PCI bridge to [bus 04-04]
[ 0.832467] pci 0000:00:0d.0: bridge window [io 0xb000-0xbfff]
[ 0.832482] pci 0000:00:0d.0: bridge window [mem 0xefd00000-0xefdfffff]
[ 0.832497] pci 0000:00:0d.0: bridge window [mem 0xefc00000-0xefcfffff 64bit pref]
[ 0.832539] pci 0000:00:0a.0: setting latency timer to 64
[ 0.832565] pci 0000:00:0b.0: setting latency timer to 64
[ 0.832586] pci 0000:00:0c.0: setting latency timer to 64
[ 0.832608] pci 0000:00:0d.0: setting latency timer to 64
[ 0.832623] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.832633] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.832643] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.832654] pci_bus 0000:01: resource 1 [mem 0xefb00000-0xefbfffff]
[ 0.832664] pci_bus 0000:01: resource 2 [mem 0xefa00000-0xefafffff pref]
[ 0.832674] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.832683] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.832694] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff]
[ 0.832700] pci_bus 0000:02: resource 1 [mem 0xef900000-0xef9fffff]
[ 0.832710] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe7ffffff 64bit pref]
[ 0.832721] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.832730] pci_bus 0000:03: resource 1 [mem 0xef800000-0xef8fffff]
[ 0.832740] pci_bus 0000:03: resource 2 [mem 0xefe00000-0xefefffff 64bit pref]
[ 0.832751] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.832760] pci_bus 0000:04: resource 1 [mem 0xefd00000-0xefdfffff]
[ 0.832767] pci_bus 0000:04: resource 2 [mem 0xefc00000-0xefcfffff 64bit pref]
[ 0.832918] NET: Registered protocol family 2
[ 0.833197] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.834101] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.835439] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.836207] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.836222] TCP reno registered
[ 0.836237] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.836265] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.836601] NET: Registered protocol family 1
[ 0.837592] ACPI: PCI Interrupt Link [AUBA] enabled at IRQ 23
[ 0.837647] pci 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 0.924727] pci 0000:00:04.0: PCI INT A disabled
[ 0.925475] ACPI: PCI Interrupt Link [AUB2] enabled at IRQ 22
[ 0.925526] pci 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 0.925588] pci 0000:00:04.1: PCI INT B disabled
[ 0.925808] pci 0000:02:00.0: Boot video device
[ 0.925828] PCI: CLS 32 bytes, default 64
[ 0.927206] audit: initializing netlink socket (disabled)
[ 0.927244] type=2000 audit(1353394391.920:1): initialized
[ 1.070105] highmem bounce pool size: 64 pages
[ 1.070131] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.092546] VFS: Disk quotas dquot_6.5.2
[ 1.092816] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.095189] fuse init (API version 7.17)
[ 1.095624] msgmni has been set to 1667
[ 1.098285] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.099174] io scheduler noop registered
[ 1.099181] io scheduler deadline registered
[ 1.099215] io scheduler cfq registered (default)
[ 1.099774] pcieport 0000:00:0b.0: setting latency timer to 64
[ 1.099910] pcieport 0000:00:0b.0: irq 40 for MSI/MSI-X
[ 1.100167] pcieport 0000:00:0c.0: setting latency timer to 64
[ 1.100282] pcieport 0000:00:0c.0: irq 41 for MSI/MSI-X
[ 1.100463] pcieport 0000:00:0d.0: setting latency timer to 64
[ 1.100577] pcieport 0000:00:0d.0: irq 42 for MSI/MSI-X
[ 1.100879] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.100993] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.101669] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.101690] ACPI: Power Button [PWRB]
[ 1.101957] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.101969] ACPI: Power Button [PWRF]
[ 1.102205] ACPI: Fan [FAN] (on)
[ 1.112059] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.112073] ACPI: Thermal Zone [THRM] (92 C)
[ 1.112270] ERST: Table is not found!
[ 1.112280] GHES: HEST is not enabled!
[ 1.112647] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.133814] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.133932] isapnp: Scanning for PnP cards...
[ 1.490850] isapnp: No Plug & Play device found
[ 1.924502] Refined TSC clocksource calibration: 2999.999 MHz.
[ 1.924523] Switching to clocksource tsc
[ 2.151840] Freeing initrd memory: 19624k freed
[ 2.229660] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.233030] Linux agpgart interface v0.103
[ 2.239370] brd: module loaded
[ 2.242458] loop: module loaded
[ 2.242944] ahci 0000:00:0e.0: version 3.0
[ 2.243647] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 2.243699] ahci 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21
[ 2.243773] ahci 0000:00:0e.0: controller can do NCQ, turning on CAP_NCQ
[ 2.243783] ahci 0000:00:0e.0: controller can't do PMP, turning off CAP_PMP
[ 2.243953] ahci 0000:00:0e.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 2.243968] ahci 0000:00:0e.0: flags: 64bit ncq sntf led clo pio
[ 2.243983] ahci 0000:00:0e.0: setting latency timer to 64
[ 2.246590] scsi0 : ahci
[ 2.246951] scsi1 : ahci
[ 2.247257] scsi2 : ahci
[ 2.247560] scsi3 : ahci
[ 2.248136] ata1: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8100 irq 21
[ 2.248147] ata2: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8180 irq 21
[ 2.248157] ata3: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8200 irq 21
[ 2.248167] ata4: SATA max UDMA/133 abar m8192@0xefff8000 port 0xefff8280 irq 21
[ 2.248625] pata_acpi 0000:00:08.0: setting latency timer to 64
[ 2.250301] Fixed MDIO Bus: probed
[ 2.250403] tun: Universal TUN/TAP device driver, 1.6
[ 2.250409] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.250813] PPP generic driver version 2.4.2
[ 2.251246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.251319] ehci_hcd 0000:00:04.1: PCI INT B -> Link[AUB2] -> GSI 22 (level, low) -> IRQ 22
[ 2.251372] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 2.251386] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 2.251562] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 2.251627] ehci_hcd 0000:00:04.1: debug port 1
[ 2.251654] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 2.251716] ehci_hcd 0000:00:04.1: irq 22, io mem 0xefffe000
[ 2.260040] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 2.260583] hub 1-0:1.0: USB hub found
[ 2.260604] hub 1-0:1.0: 8 ports detected
[ 2.260951] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.261019] ohci_hcd 0000:00:04.0: PCI INT A -> Link[AUBA] -> GSI 23 (level, low) -> IRQ 23
[ 2.261062] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 2.261076] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 2.261247] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 2
[ 2.261321] ohci_hcd 0000:00:04.0: irq 23, io mem 0xeffff000
[ 2.318495] hub 2-0:1.0: USB hub found
[ 2.318517] hub 2-0:1.0: 8 ports detected
[ 2.318864] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.319128] usbcore: registered new interface driver libusual
[ 2.319319] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.319329] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.320341] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.320754] mousedev: PS/2 mouse device common for all mice
[ 2.321285] rtc_cmos 00:05: RTC can wake from S4
[ 2.321661] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.321753] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.322043] device-mapper: uevent: version 1.0.3
[ 2.322327] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.322476] EISA: Probing bus 0 at eisa.0
[ 2.322497] Cannot allocate resource for EISA slot 1
[ 2.322561] EISA: Detected 0 cards.
[ 2.322597] cpufreq-nforce2: No nForce2 chipset.
[ 2.322611] cpuidle: using governor ladder
[ 2.322617] cpuidle: using governor menu
[ 2.322623] EFI Variables Facility v0.08 2004-May-17
[ 2.323695] TCP cubic registered
[ 2.324259] NET: Registered protocol family 10
[ 2.326756] NET: Registered protocol family 17
[ 2.326777] Registering the dns_resolver key type
[ 2.326860] Using IPI No-Shortcut mode
[ 2.327252] PM: Hibernation image not present or could not be loaded.
[ 2.327294] registered taskstats version 1
[ 2.343642] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[ 2.355408] Magic number: 4:507:873
[ 2.355694] rtc_cmos 00:05: setting system clock to 2012-11-20 06:53:14 UTC (1353394394)
[ 2.357280] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.357290] EDD information not available.
[ 2.568066] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.568134] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.568196] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.568253] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.568481] Freeing unused kernel memory: 712k freed
[ 2.569582] Write protecting the kernel text: 5624k
[ 2.569772] Write protecting the kernel read-only data: 2324k
[ 2.572098] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.646416] udevd[93]: starting version 175
[ 2.984239] Floppy drive(s): fd0 is 1.44M
[ 2.990755] pata_amd 0000:00:08.0: version 0.4.1
[ 2.990904] pata_amd 0000:00:08.0: setting latency timer to 64
[ 2.996536] scsi4 : pata_amd
[ 2.998471] scsi5 : pata_amd
[ 3.002138] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 3.002153] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 3.005238] FDC 0 is a post-1991 82077
[ 3.030748] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 3.031500] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[ 3.031547] forcedeth 0000:00:0f.0: PCI INT A -> Link[APCH] -> GSI 20 (level, low) -> IRQ 20
[ 3.031568] forcedeth 0000:00:0f.0: setting latency timer to 64
[ 3.172725] ata5.00: ATAPI: ASUS DRW-0402P/D, 1.05, max UDMA/33
[ 3.173888] ata5.01: ATA-5: WDC WD1200JB-00CRA1, 17.07W17, max UDMA/100
[ 3.173908] ata5.01: 234441648 sectors, multi 1: LBA
[ 3.173944] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0c60000) ACPI=0x701f (60:20:0x1f)
[ 3.173960] ata5: nv_mode_filter: 0x3f39f&0x3f39f->0x3f39f, BIOS=0x3f000 (0xc0c60000) ACPI=0x3f01f (60:20:0x1f)
[ 3.188590] ata5.00: configured for UDMA/33
[ 3.205668] ata5.01: configured for UDMA/100
[ 3.208072] usb 2-2: new low-speed USB device number 2 using ohci_hcd
[ 3.212461] scsi 4:0:0:0: CD-ROM ASUS DRW-0402P/D 1.05 PQ: 0 ANSI: 5
[ 3.217878] sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
[ 3.217889] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.218442] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 3.218799] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 3.223720] scsi 4:0:1:0: Direct-Access ATA WDC WD1200JB-00C 17.0 PQ: 0 ANSI: 5
[ 3.224340] sd 4:0:1:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 3.224452] sd 4:0:1:0: Attached scsi generic sg1 type 0
[ 3.224578] sd 4:0:1:0: [sda] Write Protect is off
[ 3.224593] sd 4:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 3.224696] sd 4:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.224788] ata6: port disabled--ignoring
[ 3.264288] sda: sda1 sda2 < sda5 >
[ 3.265659] sd 4:0:1:0: [sda] Attached SCSI disk
[ 3.283199] [drm] Initialized drm 1.1.0 20060810
[ 3.284754] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 3.284805] firewire_ohci 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 3.338441] [drm] radeon defaulting to kernel modesetting.
[ 3.338456] [drm] radeon kernel modesetting enabled.
[ 3.339404] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 3.339461] radeon 0000:02:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 3.339482] radeon 0000:02:00.0: setting latency timer to 64
[ 3.340394] [drm] initializing kernel modesetting (R423 0x1002:0x5D4F 0x174B:0x1600).
[ 3.340482] [drm] register mmio base: 0xEF9F0000
[ 3.340488] [drm] register mmio size: 65536
[ 3.340928] ATOM BIOS: RADEON
[ 3.340989] [drm] Generation 2 PCI interface, using max accessible memory
[ 3.341009] radeon 0000:02:00.0: VRAM: 256M 0x00000000E0000000 - 0x00000000EFFFFFFF (256M used)
[ 3.341020] radeon 0000:02:00.0: GTT: 512M 0x00000000C0000000 - 0x00000000DFFFFFFF
[ 3.341076] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 3.341083] [drm] Driver supports precise vblank timestamp query.
[ 3.341207] radeon 0000:02:00.0: irq 43 for MSI/MSI-X
[ 3.341228] radeon 0000:02:00.0: radeon: using MSI.
[ 3.341302] [drm] radeon: irq initialized.
[ 3.342220] [drm] Detected VRAM RAM=256M, BAR=128M
[ 3.342236] [drm] RAM width 256bits DDR
[ 3.342524] [TTM] Zone kernel: Available graphics memory: 436956 kiB.
[ 3.342534] [TTM] Zone highmem: Available graphics memory: 1030336 kiB.
[ 3.342544] [TTM] Initializing pool allocator.
[ 3.342649] [drm] radeon: 256M of VRAM memory ready
[ 3.342659] [drm] radeon: 512M of GTT memory ready.
[ 3.342727] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 3.348220] firewire_ohci: Added fw-ohci device 0000:01:07.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x11
[ 3.349228] [drm] PCIE GART of 512M enabled (table at 0x00000000E0040000).
[ 3.349261] [drm] radeon: 3 quad pipes, 1 z pipes initialized.
[ 3.349438] radeon 0000:02:00.0: WB enabled
[ 3.349673] [drm] Loading R400 Microcode
[ 3.357574] [drm] radeon: ring at 0x00000000C0001000
[ 3.357611] [drm] ring test succeeded in 0 usecs
[ 3.358327] [drm] radeon: ib pool ready.
[ 3.358590] [drm] ib test succeeded in 0 usecs
[ 3.359849] [drm] Radeon Display Connectors
[ 3.359856] [drm] Connector 0:
[ 3.359865] [drm] VGA
[ 3.359875] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 3.359881] [drm] Encoders:
[ 3.359886] [drm] CRT1: INTERNAL_DAC1
[ 3.359895] [drm] Connector 1:
[ 3.359900] [drm] S-video
[ 3.359905] [drm] Encoders:
[ 3.359911] [drm] TV1: INTERNAL_DAC2
[ 3.359916] [drm] Connector 2:
[ 3.359922] [drm] DVI-I
[ 3.359927] [drm] HPD1
[ 3.359936] [drm] DDC: 0x68 0x68 0x68 0x68 0x68 0x68 0x68 0x68
[ 3.359942] [drm] Encoders:
[ 3.359947] [drm] CRT2: INTERNAL_DAC2
[ 3.359952] [drm] DFP1: INTERNAL_TMDS1
[ 3.449763] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:04.0/usb2/2-2/2-2:1.0/input/input3
[ 3.450574] generic-usb 0003:045E:0053.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:04.0-2/input0
[ 3.451280] usbcore: registered new interface driver usbhid
[ 3.451291] usbhid: USB HID core driver
[ 3.461340] [drm] fb mappable at 0xE00C0000
[ 3.461351] [drm] vram apper at 0xE0000000
[ 3.461360] [drm] size 3145728
[ 3.461366] [drm] fb depth is 24
[ 3.461371] [drm] pitch is 4096
[ 3.463357] fbcon: radeondrmfb (fb0) is primary device
[ 3.463547] Console: switching to colour frame buffer device 128x48
[ 3.463619] fb0: radeondrmfb frame buffer device
[ 3.463625] drm: registered panic notifier
[ 3.463650] [drm] Initialized radeon 2.12.0 20080528 for 0000:02:00.0 on minor 0
[ 3.558887] forcedeth 0000:00:0f.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:8c:9b:bd:91
[ 3.558903] forcedeth 0000:00:0f.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 3.848418] firewire_core: created device fw0: GUID 2000000003002a4f, S400
[ 4.386541] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 4.386557] EXT4-fs (sda1): write access will be enabled during recovery
[ 13.675977] EXT4-fs (sda1): recovery complete
[ 13.676509] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 17.390151] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.029899] Adding 4805628k swap on /dev/sda5. Priority:-1 extents:1 across:4805628k
[ 18.180393] udevd[388]: starting version 175
[ 19.695004] lp: driver loaded but no devices found
[ 19.876994] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 21.000796] i2c i2c-6: nForce2 SMBus adapter at 0x1c00
[ 21.001028] i2c i2c-7: nForce2 SMBus adapter at 0x1c80
[ 21.409457] parport_pc 00:0a: reported by Plug and Play ACPI
[ 21.409708] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 21.496590] lp0: using parport0 (interrupt-driven).
[ 22.186768] ppdev: user-space parallel port driver
[ 22.842720] Linux video capture interface: v2.00
[ 23.009130] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0819)
[ 23.111487] input: UVC Camera (046d:0819) as /devices/pci0000:00/0000:00:04.1/usb1/1-1/1-1:1.0/input/input4
[ 23.115188] usbcore: registered new interface driver uvcvideo
[ 23.115200] USB Video Class driver (1.1.1)
[ 23.410030] type=1400 audit(1353394415.549:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=582 comm="apparmor_parser"
[ 23.410766] type=1400 audit(1353394415.549:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=551 comm="apparmor_parser"
[ 23.412428] type=1400 audit(1353394415.553:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=582 comm="apparmor_parser"
[ 23.413249] type=1400 audit(1353394415.553:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=582 comm="apparmor_parser"
[ 23.413430] type=1400 audit(1353394415.553:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=551 comm="apparmor_parser"
[ 23.414290] type=1400 audit(1353394415.553:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=551 comm="apparmor_parser"
[ 26.594540] init: failsafe main process (674) killed by TERM signal
[ 26.859180] snd_hda_intel 0000:00:09.0: power state changed by ACPI to D0
[ 26.859205] snd_hda_intel 0000:00:09.0: power state changed by ACPI to D0
[ 26.859873] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 26.859890] snd_hda_intel 0000:00:09.0: PCI INT A -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23
[ 26.859904] hda_intel: Disabling MSI
[ 26.860064] snd_hda_intel 0000:00:09.0: setting latency timer to 64
[ 27.072095] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 27.836750] usbcore: registered new interface driver snd-usb-audio
[ 28.912413] input: HDA NVidia Line as /devices/pci0000:00/0000:00:09.0/sound/card0/input5
[ 28.913060] input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input6
[ 28.913576] input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:09.0/sound/card0/input7
[ 28.914086] input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:09.0/sound/card0/input8
[ 28.915119] input: HDA NVidia Line-Out as /devices/pci0000:00/0000:00:09.0/sound/card0/input9
[ 31.008549] type=1400 audit(1353394423.149:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=803 comm="apparmor_parser"
[ 31.019809] type=1400 audit(1353394423.157:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=804 comm="apparmor_parser"
[ 31.021749] type=1400 audit(1353394423.161:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=813 comm="apparmor_parser"
[ 31.023383] type=1400 audit(1353394423.161:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=813 comm="apparmor_parser"
[ 31.024318] type=1400 audit(1353394423.165:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=813 comm="apparmor_parser"
[ 31.537294] type=1400 audit(1353394423.677:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=816 comm="apparmor_parser"
[ 31.539097] type=1400 audit(1353394423.677:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=816 comm="apparmor_parser"
[ 31.734786] type=1400 audit(1353394423.873:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=826 comm="apparmor_parser"
[ 31.736703] type=1400 audit(1353394423.877:16): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=826 comm="apparmor_parser"
[ 32.003768] type=1400 audit(1353394424.141:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=814 comm="apparmor_parser"
[ 32.721718] Bluetooth: Core ver 2.16
[ 32.721817] NET: Registered protocol family 31
[ 32.721827] Bluetooth: HCI device and connection manager initialized
[ 32.721842] Bluetooth: HCI socket layer initialized
[ 32.721848] Bluetooth: L2CAP socket layer initialized
[ 32.722206] Bluetooth: SCO socket layer initialized
[ 33.293963] Bluetooth: RFCOMM TTY layer initialized
[ 33.293988] Bluetooth: RFCOMM socket layer initialized
[ 33.293995] Bluetooth: RFCOMM ver 1.11
[ 34.356442] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 34.356457] Bluetooth: BNEP filters: protocol multicast
[ 35.860530] forcedeth 0000:00:0f.0: irq 44 for MSI/MSI-X
[ 35.860870] forcedeth 0000:00:0f.0: eth0: no link during initialization
[ 35.861924] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.864143] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 36.960693] init: gdm main process (965) killed by TERM signal
[ 43.588606] init: plymouth-stop pre-start process (1321) terminated with status 1
[ 87.036219] forcedeth 0000:00:0f.0: eth0: link up
[ 87.036931] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 96.590297] forcedeth 0000:00:0f.0: eth0: link down
[ 97.776026] eth0: no IPv6 routers present
[ 98.203530] forcedeth 0000:00:0f.0: eth0: link up
[ 98.443963] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 98.831960] ISOFS: changing to secondary root
[ 101.399220] forcedeth 0000:00:0f.0: eth0: link down
[ 103.005874] forcedeth 0000:00:0f.0: eth0: link up
[ 286.899610] CPU0: Core temperature above threshold, cpu clock throttled (total events = 1)
[ 287.693870] CPU0: Core temperature/speed normal
[ 299.988084] [Hardware Error]: Machine check events logged
[ 312.584023] CPU1: Core temperature/speed normal
[ 449.988081] [Hardware Error]: Machine check events logged
[ 616.218463] CPU1: Core temperature/speed normal
[ 674.988036] [Hardware Error]: Machine check events logged
[ 918.546473] CPU1: Core temperature above threshold, cpu clock throttled (total events = 562)
[ 918.600070] CPU1: Core temperature/speed normal
[ 1139.300802] CPU0: Core temperature above threshold, cpu clock throttled (total events = 5)
[ 1139.400299] CPU0: Core temperature/speed normal
[ 1199.988060] [Hardware Error]: Machine check events logged
[ 1225.427874] CPU1: Core temperature above threshold, cpu clock throttled (total events = 751)
[ 1225.440873] CPU1: Core temperature/speed normal
[ 1349.988054] [Hardware Error]: Machine check events logged
[ 2131.061695] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 2131.067946] SGI XFS Quota Management subsystem
[ 2131.110574] JFS: nTxBlock = 8192, nTxLock = 65536
[ 2131.222874] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 2131.325642] QNX4 filesystem 0.2.3 registered.
[ 2131.459441] Btrfs loaded
[ 2137.529252] CPU1: Core temperature above threshold, cpu clock throttled (total events = 800)
[ 2137.548644] CPU1: Core temperature/speed normal
[ 2174.988073] [Hardware Error]: Machine check events logged
[ 2950.173360] CPU1: Core temperature above threshold, cpu clock throttled (total events = 863)
[ 2950.360705] CPU1: Core temperature/speed normal
[ 3000.000064] [Hardware Error]: Machine check events logged
[ 3305.547158] CPU1: Core temperature above threshold, cpu clock throttled (total events = 910)
[ 3306.801406] CPU1: Core temperature/speed normal
[ 3450.000066] [Hardware Error]: Machine check events logged
[ 4540.964065] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[ 4545.272763] Initializing USB Mass Storage driver...
[ 4545.273303] scsi6 : usb-storage 1-4:1.0
[ 4545.273680] usbcore: registered new interface driver usb-storage
[ 4545.273691] USB Mass Storage support registered.
[ 4546.274497] scsi 6:0:0:0: Direct-Access ATP ToughDrive 1100 PQ: 0 ANSI: 0 CCS
[ 4546.281353] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4546.286933] sd 6:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4546.288478] sd 6:0:0:0: [sdb] Write Protect is off
[ 4546.288498] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 4546.290603] sd 6:0:0:0: [sdb] No Caching mode page present
[ 4546.290620] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4546.297320] sd 6:0:0:0: [sdb] No Caching mode page present
[ 4546.297336] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4546.298443] sdb: sdb1
[ 4546.302289] sd 6:0:0:0: [sdb] No Caching mode page present
[ 4546.302305] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 4546.302316] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 4780.445168] WARNING! power/level is deprecated; use power/control instead
[ 4780.528214] usb 1-4: USB disconnect, device number 4
[ 4780.976102] usb 2-4: new full-speed USB device number 3 using ohci_hcd
[ 4781.176521] usb 2-4: not running at top speed; connect to a high speed hub
[ 4781.200621] scsi7 : usb-storage 2-4:1.0
[ 4782.208636] scsi 7:0:0:0: Direct-Access ATP ToughDrive 1100 PQ: 0 ANSI: 0 CCS
[ 4782.213788] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 4782.223628] sd 7:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 4782.230662] sd 7:0:0:0: [sdb] Write Protect is off
[ 4782.230679] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 4782.237561] sd 7:0:0:0: [sdb] No Caching mode page present
[ 4782.237577] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 4782.277552] sd 7:0:0:0: [sdb] No Caching mode page present
[ 4782.277569] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 4782.287782] sdb: sdb1
[ 4782.324568] sd 7:0:0:0: [sdb] No Caching mode page present
[ 4782.324580] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 4782.324591] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 4784.759748] usb 2-4: USB disconnect, device number 3
[ 5690.678442] CPU1: Core temperature above threshold, cpu clock throttled (total events = 961)
[ 5690.705830] CPU1: Core temperature/speed normal
[ 5700.000084] [Hardware Error]: Machine check events logged
[ 5782.478960] CPU0: Core temperature above threshold, cpu clock throttled (total events = 14)
[ 5782.805032] CPU0: Core temperature/speed normal
[ 5850.000094] [Hardware Error]: Machine check events logged
[ 6447.480200] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6447.996135] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6448.752174] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6449.264110] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6452.628207] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 6452.968179] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6455.516140] hub 1-0:1.0: unable to enumerate USB device on port 3

[eliasps]

Κάποια στιγμή φαίνεται να λειτούργησε σωστά η σύνδεση του κινητού στον υπολογιστή:

Κώδικας: Επιλογή όλων

[ 4540.964065] usb 1-4: new high-speed USB device number 4 using ehci_hcd
[ 4545.272763] Initializing USB Mass Storage driver...
[ 4545.273303] scsi6 : usb-storage 1-4:1.0
[ 4545.273680] usbcore: registered new interface driver usb-storage
[ 4545.273691] USB Mass Storage support registered.
[ 4546.274497] scsi 6:0:0:0: Direct-Access ATP ToughDrive 1100 PQ: 0 ANSI: 0 CCS
[ 4546.281353] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 4546.286933] sd 6:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)

Παρόλα αυτά, παρακάτω εμφανίζεται ένα σφάλμα στην σύνδεση USB:

Κώδικας: Επιλογή όλων

[ 6447.480200] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6447.996135] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6448.752174] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6449.264110] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6452.628207] hub 1-0:1.0: unable to enumerate USB device on port 3
[ 6452.968179] hub 2-0:1.0: unable to enumerate USB device on port 3
[ 6455.516140] hub 1-0:1.0: unable to enumerate USB device on port 3

Off topic:
Bλέπω και αυτά:

Κώδικας: Επιλογή όλων

[ 5782.478960] CPU0: Core temperature above threshold, cpu clock throttled (total events = 14)
[ 5782.805032] CPU0: Core temperature/speed normal
[ 5850.000094] [Hardware Error]: Machine check events logged

Υπάρχει υπερθέρμανση στον επεξεργαστή του υπολογιστή.