Καρτα TV "AverTV Studio 303"

[tagtheodor]

Καλησπερα
Υπαρχει περιπτωση να μπορεσω να δω TV απο αυτη την καρτα μεσω linux?
Δοκιμασα kdetv & tvtime αλλα δεν τα καταφερα.
Η καρτα ειναι PCI και το lspci -nn

Κώδικας: Επιλογή όλων


00:00.0 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:0282]
00:00.1 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:1282]
00:00.2 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:2282]
00:00.3 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:3282]
00:00.4 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:4282]
00:00.7 Host bridge [0600]: VIA Technologies, Inc. K8T800Pro Host Bridge [1106:7282]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South] [1106:b188]
00:0b.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
00:0e.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value [1102:0008]
00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149] (rev 80)
00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06)
00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 81)
00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 86)
00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
00:11.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059] (rev 60)
00:11.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 80)
00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 78)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: nVidia Corporation G70 [GeForce 7800 GS] [10de:00f5] (rev a2)


[logari81]

για δωσε το αποτελεσμα του

Κώδικας: Επιλογή όλων

gedit /var/log/dmesg

[tagtheodor]

Κώδικας: Επιλογή όλων


[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@palmer) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 15 11:03:58 UTC 2009 (Ubuntu 2.6.27-11.24-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x3ffb0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[ 0.000000] RAMDISK: 3781d000 - 37fef2bd
[ 0.000000] ACPI: RSDP 000FAB00, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT 3FFB0000, 0030 (r1 A M I OEMRSDT 7000515 MSFT 97)
[ 0.000000] ACPI: FACP 3FFB0200, 0081 (r1 A M I OEMFACP 7000515 MSFT 97)
[ 0.000000] ACPI: DSDT 3FFB03E0, 3641 (r1 A0232 A0232008 8 MSFT 100000D)
[ 0.000000] ACPI: FACS 3FFC0000, 0040
[ 0.000000] ACPI: APIC 3FFB0390, 004A (r1 A M I OEMAPIC 7000515 MSFT 97)
[ 0.000000] ACPI: OEMB 3FFC0040, 003F (r1 A M I OEMBIOS 7000515 MSFT 97)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00011000 - 00018000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[ 0.000000] #4 [003781d000 - 0037fef2bd] RAMDISK ==> [003781d000 - 0037fef2bd]
[ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[ 0.000000] #6 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0003ffb0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffb0
[ 0.000000] On node 0 totalpages: 261951
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000240
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32400 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259647
[ 0.000000] Kernel command line: root=UUID=34d2f87f-d6c5-46f7-abba-ed52cf32b5b4 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 1802.248 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1024428k/1048256k available (2576k kernel code, 22988k reserved, 1165k data, 424k init, 130752k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004018] Calibrating delay loop (skipped), value calculated using timer frequency.. 3604.49 BogoMIPS (lpj=7208992)
[ 0.004043] Security Framework initialized
[ 0.004055] SELinux: Disabled at boot.
[ 0.004087] AppArmor: AppArmor initialized
[ 0.004098] Mount-cache hash table entries: 512
[ 0.004304] Initializing cgroup subsys ns
[ 0.004309] Initializing cgroup subsys cpuacct
[ 0.004312] Initializing cgroup subsys memory
[ 0.004330] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004333] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004350] Checking 'hlt' instruction... OK.
[ 0.020498] SMP alternatives: switching to UP code
[ 0.026349] Freeing SMP alternatives: 11k freed
[ 0.026355] ACPI: Core revision 20080609
[ 0.027719] ACPI: Checking initramfs for custom DSDT
[ 0.400025] ENABLING IO-APIC IRQs
[ 0.400025] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.436371] CPU0: AMD Sempron(tm) Processor 3100+ stepping 02
[ 0.440027] Brought up 1 CPUs
[ 0.440027] Total of 1 processors activated (3604.49 BogoMIPS).
[ 0.440027] CPU0 attaching NULL sched-domain.
[ 0.440027] net_namespace: 840 bytes
[ 0.440027] Booting paravirtualized kernel on bare hardware
[ 0.440027] Time: 13:11:50 Date: 01/24/09
[ 0.440027] NET: Registered protocol family 16
[ 0.440027] EISA bus registered
[ 0.440027] ACPI: bus type pci registered
[ 0.440027] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.440027] PCI: Using configuration type 1 for base access
[ 0.440027] ACPI: EC: Look up EC in DSDT
[ 0.445874] ACPI: Interpreter enabled
[ 0.445879] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.445897] ACPI: Using IOAPIC for interrupt routing
[ 0.454653] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.454749] PCI: 0000:00:00.0 reg 10 32bit mmio: [dc000000, dfffffff]
[ 0.454984] pci 0000:00:01.0: supports D1
[ 0.455022] PCI: 0000:00:0b.0 reg 10 32bit mmio: [f8000000, f8ffffff]
[ 0.455089] PCI: 0000:00:0e.0 reg 10 io port: [e800, e83f]
[ 0.455122] pci 0000:00:0e.0: supports D1
[ 0.455124] pci 0000:00:0e.0: supports D2
[ 0.455150] PCI: 0000:00:0f.0 reg 10 io port: [e400, e407]
[ 0.455156] PCI: 0000:00:0f.0 reg 14 io port: [e000, e003]
[ 0.455163] PCI: 0000:00:0f.0 reg 18 io port: [d800, d807]
[ 0.455169] PCI: 0000:00:0f.0 reg 1c io port: [d400, d403]
[ 0.455175] PCI: 0000:00:0f.0 reg 20 io port: [d000, d00f]
[ 0.455182] PCI: 0000:00:0f.0 reg 24 io port: [c800, c8ff]
[ 0.455236] PCI: 0000:00:0f.1 reg 20 io port: [fc00, fc0f]
[ 0.455299] PCI: 0000:00:10.0 reg 20 io port: [b400, b41f]
[ 0.455319] pci 0000:00:10.0: supports D1
[ 0.455321] pci 0000:00:10.0: supports D2
[ 0.455323] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455328] pci 0000:00:10.0: PME# disabled
[ 0.455367] PCI: 0000:00:10.1 reg 20 io port: [b800, b81f]
[ 0.455386] pci 0000:00:10.1: supports D1
[ 0.455388] pci 0000:00:10.1: supports D2
[ 0.455391] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455395] pci 0000:00:10.1: PME# disabled
[ 0.455433] PCI: 0000:00:10.2 reg 20 io port: [c000, c01f]
[ 0.455452] pci 0000:00:10.2: supports D1
[ 0.455454] pci 0000:00:10.2: supports D2
[ 0.455456] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455460] pci 0000:00:10.2: PME# disabled
[ 0.455498] PCI: 0000:00:10.3 reg 20 io port: [c400, c41f]
[ 0.455517] pci 0000:00:10.3: supports D1
[ 0.455519] pci 0000:00:10.3: supports D2
[ 0.455522] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455526] pci 0000:00:10.3: PME# disabled
[ 0.455549] PCI: 0000:00:10.4 reg 10 32bit mmio: [f9d00000, f9d000ff]
[ 0.455583] pci 0000:00:10.4: supports D1
[ 0.455585] pci 0000:00:10.4: supports D2
[ 0.455588] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455592] pci 0000:00:10.4: PME# disabled
[ 0.455648] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.455654] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 0.455690] PCI: 0000:00:11.5 reg 10 io port: [1000, 10ff]
[ 0.455726] pci 0000:00:11.5: supports D1
[ 0.455728] pci 0000:00:11.5: supports D2
[ 0.455752] PCI: 0000:00:11.6 reg 10 io port: [0, ff]
[ 0.455812] PCI: 0000:00:12.0 reg 10 io port: [b000, b0ff]
[ 0.455818] PCI: 0000:00:12.0 reg 14 32bit mmio: [f9c00000, f9c000ff]
[ 0.455849] pci 0000:00:12.0: supports D1
[ 0.455851] pci 0000:00:12.0: supports D2
[ 0.455854] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.455858] pci 0000:00:12.0: PME# disabled
[ 0.455959] PCI: 0000:01:00.0 reg 10 32bit mmio: [fb000000, fbffffff]
[ 0.455965] PCI: 0000:01:00.0 reg 14 32bit mmio: [e0000000, efffffff]
[ 0.455972] PCI: 0000:01:00.0 reg 18 32bit mmio: [fa000000, faffffff]
[ 0.455988] PCI: 0000:01:00.0 reg 30 32bit mmio: [f9f00000, f9f1ffff]
[ 0.456037] PCI: bridge 0000:00:01.0 32bit mmio: [f9f00000, fbffffff]
[ 0.456041] PCI: bridge 0000:00:01.0 32bit mmio pref: [e0000000, f7ffffff]
[ 0.456049] bus 00 -> node 0
[ 0.456057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.468311] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.468447] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.468576] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 14 15)
[ 0.468704] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.468832] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.468960] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.469088] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.469216] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.469389] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - F1, should be EC [20080609]
[ 0.469398] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.469436] pnp: PnP ACPI init
[ 0.469447] ACPI: bus type pnp registered
[ 0.471840] pnp 00:09: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471845] pnp 00:09: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471849] pnp 00:09: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471853] pnp 00:09: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471856] pnp 00:09: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471860] pnp 00:09: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471864] pnp 00:09: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471868] pnp 00:09: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471871] pnp 00:09: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471875] pnp 00:09: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471879] pnp 00:09: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471883] pnp 00:09: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.471887] pnp 00:09: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.473688] pnp: PnP ACPI: found 13 devices
[ 0.473691] ACPI: ACPI bus type pnp unregistered
[ 0.473696] PnPBIOS: Disabled by ACPI PNP
[ 0.474085] PCI: Using ACPI for IRQ routing
[ 0.474234] NET: Registered protocol family 8
[ 0.474234] NET: Registered protocol family 20
[ 0.474234] NetLabel: Initializing
[ 0.474234] NetLabel: domain hash size = 128
[ 0.474234] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.474234] NetLabel: unlabeled traffic allowed by default
[ 0.474234] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.474234] actual entries 65620
[ 0.474234] AppArmor: AppArmor Filesystem Enabled
[ 0.474234] ACPI: RTC can wake from S4
[ 0.474234] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.474234] system 00:09: ioport range 0x3e1-0x3e7 has been reserved
[ 0.474234] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.474234] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.474234] system 00:09: ioport range 0x400-0x41f has been reserved
[ 0.474234] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.474234] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.474234] system 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.474234] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.474234] system 00:0c: iomem range 0xc0000-0xdffff could not be reserved
[ 0.474234] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[ 0.474234] system 00:0c: iomem range 0x100000-0x3ffeffff could not be reserved
[ 0.510178] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.510181] pci 0000:00:01.0: IO window: disabled
[ 0.510186] pci 0000:00:01.0: MEM window: 0xf9f00000-0xfbffffff
[ 0.510190] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000f7ffffff
[ 0.510208] pci 0000:00:01.0: setting latency timer to 64
[ 0.510212] bus: 00 index 0 io port: [0, ffff]
[ 0.510215] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.510217] bus: 01 index 0 mmio: [0, 0]
[ 0.510219] bus: 01 index 1 mmio: [f9f00000, fbffffff]
[ 0.510222] bus: 01 index 2 mmio: [e0000000, f7ffffff]
[ 0.510224] bus: 01 index 3 mmio: [0, 0]
[ 0.510241] NET: Registered protocol family 2
[ 0.510390] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.510778] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.512246] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.512974] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.512978] TCP reno registered
[ 0.513121] NET: Registered protocol family 1
[ 0.513281] checking if image is initramfs... it is
[ 1.012082] Switched to high resolution mode on CPU 0
[ 1.296122] Freeing initrd memory: 8008k freed
[ 1.296946] audit: initializing netlink socket (disabled)
[ 1.296967] type=2000 audit(1232802710.296:1): initialized
[ 1.303618] highmem bounce pool size: 64 pages
[ 1.303626] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.305948] VFS: Disk quotas dquot_6.5.1
[ 1.306058] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.306184] msgmni has been set to 1761
[ 1.306330] io scheduler noop registered
[ 1.306333] io scheduler anticipatory registered
[ 1.306336] io scheduler deadline registered
[ 1.306350] io scheduler cfq registered (default)
[ 1.306371] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.332049] pci 0000:01:00.0: Boot video device
[ 1.332441] isapnp: Scanning for PnP cards...
[ 1.685982] isapnp: No Plug & Play device found
[ 1.728221] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.728349] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.729314] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.731161] brd: module loaded
[ 1.731240] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.731382] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.731815] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.731821] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.732701] mice: PS/2 mouse device common for all mice
[ 1.732854] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.732895] rtc0: alarms up to one year, y3k
[ 1.733038] EISA: Probing bus 0 at eisa.0
[ 1.733046] Cannot allocate resource for EISA slot 1
[ 1.733073] EISA: Detected 0 cards.
[ 1.733076] cpuidle: using governor ladder
[ 1.733079] cpuidle: using governor menu
[ 1.733656] TCP cubic registered
[ 1.733691] Using IPI No-Shortcut mode
[ 1.734000] registered taskstats version 1
[ 1.734155] Magic number: 9:765:180
[ 1.734236] tty ttyr6: hash matches
[ 1.734404] rtc_cmos 00:02: setting system clock to 2009-01-24 13:11:51 UTC (1232802711)
[ 1.734409] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.734411] EDD information not available.
[ 1.734822] Freeing unused kernel memory: 424k freed
[ 1.734892] Write protecting the kernel text: 2580k
[ 1.734934] Write protecting the kernel read-only data: 940k
[ 1.763809] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 2.008042] fuse init (API version 7.9)
[ 2.203400] processor ACPI0007:00: registered as cooling_device0
[ 2.960225] No dock devices found.
[ 3.038398] SCSI subsystem initialized
[ 3.071274] usbcore: registered new interface driver usbfs
[ 3.071316] usbcore: registered new interface driver hub
[ 3.071367] usbcore: registered new device driver usb
[ 3.101010] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 3.101027] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 3.101111] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 3.101173] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf9d00000
[ 3.112031] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.112280] usb usb1: configuration #1 chosen from 1 choice
[ 3.112312] hub 1-0:1.0: USB hub found
[ 3.112326] hub 1-0:1.0: 8 ports detected
[ 3.128025] USB Universal Host Controller Interface driver v3.0
[ 3.140053] libata version 3.00 loaded.
[ 3.168761] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 3.320414] sata_via 0000:00:0f.0: version 2.3
[ 3.320437] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 3.320489] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 3.320975] scsi0 : sata_via
[ 3.321114] scsi1 : sata_via
[ 3.321156] ata1: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xd000 irq 20
[ 3.321160] ata2: SATA max UDMA/133 cmd 0xd800 ctl 0xd400 bmdma 0xd008 irq 20
[ 3.432052] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 3.524119] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.567017] usb 1-8: configuration #1 chosen from 1 choice
[ 3.688401] ata1.00: ATA-6: ST3120827AS, 3.42, max UDMA/133
[ 3.688406] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.705418] ata1.00: configured for UDMA/133
[ 3.908042] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.987782] usbcore: registered new interface driver libusual
[ 3.995782] Initializing USB Mass Storage driver...
[ 3.996732] scsi2 : SCSI emulation for USB Mass Storage devices
[ 3.996847] usbcore: registered new interface driver usb-storage
[ 3.996851] USB Mass Storage support registered.
[ 3.996986] usb-storage: device found at 2
[ 3.996989] usb-storage: waiting for device to settle before scanning
[ 4.072359] ata2.00: ATA-6: ST3120827AS, 3.42, max UDMA/133
[ 4.072365] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.088336] ata2.00: configured for UDMA/133
[ 4.088474] scsi 0:0:0:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5
[ 4.088709] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.089384] scsi 1:0:0:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5
[ 4.089582] scsi 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.089621] pata_via 0000:00:0f.1: version 0.3.3
[ 4.089640] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.090392] scsi3 : pata_via
[ 4.090726] scsi4 : pata_via
[ 4.093148] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 4.093152] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 4.272534] ata3.00: ATA-7: HDS728080PLAT20, PF2OA2AA, max UDMA/133
[ 4.272539] ata3.00: 160836480 sectors, multi 16: LBA48
[ 4.272564] ata3.01: ATAPI: _NEC DVD_RW ND-3540A, 1.01, max UDMA/33
[ 4.296390] ata3.00: configured for UDMA/133
[ 4.312281] ata3.01: configured for UDMA/33
[ 4.479432] scsi 3:0:0:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 4.479676] scsi 3:0:0:0: Attached scsi generic sg2 type 0
[ 4.481097] scsi 3:0:1:0: CD-ROM _NEC DVD_RW ND-3540A 1.01 PQ: 0 ANSI: 5
[ 4.481316] scsi 3:0:1:0: Attached scsi generic sg3 type 5
[ 4.481363] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.481375] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 4.481410] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 4.481438] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
[ 4.481569] usb usb2: configuration #1 chosen from 1 choice
[ 4.481600] hub 2-0:1.0: USB hub found
[ 4.481610] hub 2-0:1.0: 2 ports detected
[ 4.688997] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 4.689009] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 4.689264] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 4.689292] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
[ 4.689802] usb usb3: configuration #1 chosen from 1 choice
[ 4.690053] hub 3-0:1.0: USB hub found
[ 4.690067] hub 3-0:1.0: 2 ports detected
[ 4.897053] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.897065] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 4.897347] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 4.897375] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[ 4.897936] usb usb4: configuration #1 chosen from 1 choice
[ 4.898228] hub 4-0:1.0: USB hub found
[ 4.898241] hub 4-0:1.0: 2 ports detected
[ 5.105155] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5.105167] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 5.105504] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 5.105533] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
[ 5.106130] usb usb5: configuration #1 chosen from 1 choice
[ 5.107386] hub 5-0:1.0: USB hub found
[ 5.107403] hub 5-0:1.0: 2 ports detected
[ 5.313297] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.313638] eth0: VIA Rhine II at 0xf9c00000, 00:13:d4:de:66:2c, IRQ 23.
[ 5.314347] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 5.367955] Driver 'sd' needs updating - please use bus_type methods
[ 5.368100] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 5.368117] sd 0:0:0:0: [sda] Write Protect is off
[ 5.368120] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.368143] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.368224] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 5.368238] sd 0:0:0:0: [sda] Write Protect is off
[ 5.368240] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.368262] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.368267] sda: sda1
[ 5.391393] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.391494] sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 5.391513] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.391516] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.391540] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.391598] sd 1:0:0:0: [sdb] 234441648 512-byte hardware sectors (120034 MB)
[ 5.391611] sd 1:0:0:0: [sdb] Write Protect is off
[ 5.391614] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.391637] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.391642] sdb: sdb1
[ 5.415824] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 5.415927] sd 3:0:0:0: [sdc] 160836480 512-byte hardware sectors (82348 MB)
[ 5.415945] sd 3:0:0:0: [sdc] Write Protect is off
[ 5.415948] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.415973] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.416056] sd 3:0:0:0: [sdc] 160836480 512-byte hardware sectors (82348 MB)
[ 5.416069] sd 3:0:0:0: [sdc] Write Protect is off
[ 5.416072] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.416095] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.416100] sdc: sdc1 sdc2
[ 5.447811] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 5.516524] Driver 'sr' needs updating - please use bus_type methods
[ 5.519184] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 5.519188] Uniform CD-ROM driver Revision: 3.20
[ 5.519300] sr 3:0:1:0: Attached scsi CD-ROM sr0
[ 5.768764] PM: Starting manual resume from disk
[ 5.768770] PM: Resume from partition 8:34
[ 5.768772] PM: Checking hibernation image.
[ 5.768973] PM: Resume from disk failed.
[ 5.833061] kjournald starting. Commit interval 5 seconds
[ 5.833077] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.996229] usb-storage: device scan complete
[ 8.996697] scsi 2:0:0:0: Direct-Access Kingston DT Mini Slim 1.00 PQ: 0 ANSI: 2
[ 8.997671] sd 2:0:0:0: [sdd] 15695872 512-byte hardware sectors (8036 MB)
[ 8.998295] sd 2:0:0:0: [sdd] Write Protect is off
[ 8.998298] sd 2:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 8.998301] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 8.999794] sd 2:0:0:0: [sdd] 15695872 512-byte hardware sectors (8036 MB)
[ 9.000419] sd 2:0:0:0: [sdd] Write Protect is off
[ 9.000422] sd 2:0:0:0: [sdd] Mode Sense: 23 00 00 00
[ 9.000424] sd 2:0:0:0: [sdd] Assuming drive cache: write through
[ 9.000429] sdd: sdd1 sdd2 < sdd5 >
[ 9.233266] sd 2:0:0:0: [sdd] Attached SCSI removable disk
[ 9.233454] sd 2:0:0:0: Attached scsi generic sg4 type 0
[ 11.225335] udevd version 124 started
[ 12.232224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.284716] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.340183] Linux agpgart interface v0.103
[ 12.513558] agpgart-amd64 0000:00:00.0: AGP bridge [1106/0282]
[ 12.515885] agpgart-amd64 0000:00:00.0: AGP aperture is 32M @ 0xdc000000
[ 13.008229] Linux video capture interface: v2.00
[ 13.064319] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 13.076054] ACPI: Power Button (FF) [PWRF]
[ 13.076238] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 13.092022] ACPI: Power Button (CM) [PWRB]
[ 13.092175] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 13.104033] ACPI: Sleep Button (CM) [SLPB]
[ 13.540194] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 13.540905] cx8800 0000:00:0b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.541589] cx88[0]: Your board isn't known (yet) to the driver. You can
[ 13.541591] cx88[0]: try to pick one of the existing card configs via
[ 13.541593] cx88[0]: card=<n> insmod option. Updating to the latest
[ 13.541594] cx88[0]: version might help as well.
[ 13.541599] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 13.541602] cx88[0]: card=0 -> UNKNOWN/GENERIC
[ 13.541605] cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
[ 13.541608] cx88[0]: card=2 -> GDI Black Gold
[ 13.541610] cx88[0]: card=3 -> PixelView
[ 13.541612] cx88[0]: card=4 -> ATI TV Wonder Pro
[ 13.541614] cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
[ 13.541617] cx88[0]: card=6 -> AverTV Studio 303 (M126)
[ 13.541620] cx88[0]: card=7 -> MSI TV-@nywhere Master
[ 13.541622] cx88[0]: card=8 -> Leadtek Winfast DV2000
[ 13.541625] cx88[0]: card=9 -> Leadtek PVR 2000
[ 13.541627] cx88[0]: card=10 -> IODATA GV-VCP3/PCI
[ 13.541629] cx88[0]: card=11 -> Prolink PlayTV PVR
[ 13.541632] cx88[0]: card=12 -> ASUS PVR-416
[ 13.541634] cx88[0]: card=13 -> MSI TV-@nywhere
[ 13.541637] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
[ 13.541639] cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
[ 13.541642] cx88[0]: card=16 -> KWorld LTV883RF
[ 13.541644] cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
[ 13.541647] cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
[ 13.541649] cx88[0]: card=19 -> Conexant DVB-T reference design
[ 13.541652] cx88[0]: card=20 -> Provideo PV259
[ 13.541654] cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
[ 13.541657] cx88[0]: card=22 -> pcHDTV HD3000 HDTV
[ 13.541659] cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
[ 13.541662] cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[ 13.541665] cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[ 13.541668] cx88[0]: card=26 -> IODATA GV/BCTV7E
[ 13.541670] cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[ 13.541673] cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
[ 13.541676] cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
[ 13.541678] cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
[ 13.541681] cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
[ 13.541684] cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
[ 13.541686] cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
[ 13.541689] cx88[0]: card=34 -> ATI HDTV Wonder
[ 13.541691] cx88[0]: card=35 -> WinFast DTV1000-T
[ 13.541694] cx88[0]: card=36 -> AVerTV 303 (M126)
[ 13.541696] cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S
[ 13.541699] cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S
[ 13.541701] cx88[0]: card=39 -> KWorld DVB-S 100
[ 13.541704] cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[ 13.541707] cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[ 13.541710] cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro
[ 13.541712] cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702
[ 13.541715] cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[ 13.541718] cx88[0]: card=45 -> KWorld HardwareMpegTV XPert
[ 13.541721] cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid
[ 13.541723] cx88[0]: card=47 -> pcHDTV HD5500 HDTV
[ 13.541726] cx88[0]: card=48 -> Kworld MCE 200 Deluxe
[ 13.541728] cx88[0]: card=49 -> PixelView PlayTV P7000
[ 13.541731] cx88[0]: card=50 -> NPG Tech Real TV FM Top 10
[ 13.541733] cx88[0]: card=51 -> WinFast DTV2000 H ver. I (old)
[ 13.541736] cx88[0]: card=52 -> Geniatech DVB-S
[ 13.541738] cx88[0]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[ 13.541741] cx88[0]: card=54 -> Norwood Micro TV Tuner
[ 13.541744] cx88[0]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[ 13.541747] cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[ 13.541750] cx88[0]: card=57 -> ADS Tech Instant Video PCI
[ 13.541753] cx88[0]: card=58 -> Pinnacle PCTV HD 800i
[ 13.541755] cx88[0]: card=59 -> DViCO FusionHDTV 5 PCI nano
[ 13.541758] cx88[0]: card=60 -> Pinnacle Hybrid PCTV
[ 13.541760] cx88[0]: card=61 -> Winfast TV2000 XP Global
[ 13.541763] cx88[0]: card=62 -> PowerColor RA330
[ 13.541765] cx88[0]: card=63 -> Geniatech X8000-MT DVBT
[ 13.541768] cx88[0]: card=64 -> DViCO FusionHDTV DVB-T PRO
[ 13.541770] cx88[0]: card=65 -> DViCO FusionHDTV 7 Gold
[ 13.541773] cx88[0]: card=66 -> Prolink Pixelview MPEG 8000GT
[ 13.541776] cx88[0]: card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120)
[ 13.541778] cx88[0]: card=68 -> WinFast DTV2000 H ver. J (new)
[ 13.541782] cx88[0]: subsystem: 1461:001b, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 13.541785] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 13.554243] parport_pc 00:07: reported by Plug and Play ACPI
[ 13.554337] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 13.851280] nvidia: module license 'NVIDIA' taints kernel.
[ 14.592385] tuner' 0-0043: chip found @ 0x86 (cx88[0])
[ 14.719506] tda9887 0-0043: creating new instance
[ 14.719511] tda9887 0-0043: tda988[5/6/7] found
[ 14.848101] All bytes are equal. It is not a TEA5767
[ 14.848179] tuner' 0-0060: chip found @ 0xc0 (cx88[0])
[ 14.886532] cx88[0]/0: found at 0000:00:0b.0, rev: 5, irq: 16, latency: 64, mmio: 0xf8000000
[ 14.886751] cx88[0]/0: registered device video0 [v4l2]
[ 14.887457] cx88[0]/0: registered device vbi0
[ 14.887477] tuner' 0-0060: tuner type not set
[ 14.904253] EMU10K1_Audigy 0000:00:0e.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 14.906741] Audigy2 value: Special config.
[ 15.054702] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
[ 15.054717] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 15.606733] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 15.804039] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[ 16.308309] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[ 16.308329] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 16.308465] VIA 82xx Audio 0000:00:11.5: enabling device (0000 -> 0001)
[ 16.308473] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 16.308616] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 16.442216] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
[ 16.823228] codec_read: codec 0 is not valid [0xfe0000]
[ 16.830027] codec_read: codec 0 is not valid [0xfe0000]
[ 16.837540] codec_read: codec 0 is not valid [0xfe0000]
[ 16.844312] codec_read: codec 0 is not valid [0xfe0000]
[ 16.861964] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.862972] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
[ 18.233921] lp0: using parport0 (interrupt-driven).
[ 18.376406] Adding 3052340k swap on /dev/sdc2. Priority:-1 extents:1 across:3052340k
[ 18.955017] EXT3 FS on sdc1, internal journal
[ 20.056900] type=1505 audit(1232802729.960:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4121
[ 20.296116] type=1505 audit(1232802730.200:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4126
[ 20.296449] type=1505 audit(1232802730.200:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4126
[ 20.446341] ip_tables: (C) 2000-2006 Netfilter Core Team


[logari81]

Κώδικας: Επιλογή όλων


[ 13.008229] Linux video capture interface: v2.00
[ 13.064319] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 13.076054] ACPI: Power Button (FF) [PWRF]
[ 13.076238] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 13.092022] ACPI: Power Button (CM) [PWRB]
[ 13.092175] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 13.104033] ACPI: Sleep Button (CM) [SLPB]
[ 13.540194] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 13.540905] cx8800 0000:00:0b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.541589] cx88[0]: Your board isn't known (yet) to the driver. You can
[ 13.541591] cx88[0]: try to pick one of the existing card configs via
[ 13.541593] cx88[0]: card=<n> insmod option. Updating to the latest
[ 13.541594] cx88[0]: version might help as well.
[ 13.541599] cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
[ 13.541602] cx88[0]: card=0 -> UNKNOWN/GENERIC
[ 13.541605] cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
[ 13.541608] cx88[0]: card=2 -> GDI Black Gold
[ 13.541610] cx88[0]: card=3 -> PixelView
[ 13.541612] cx88[0]: card=4 -> ATI TV Wonder Pro
[ 13.541614] cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
[ 13.541617] cx88[0]: card=6 -> AverTV Studio 303 (M126)
[ 13.541620] cx88[0]: card=7 -> MSI TV-@nywhere Master
[ 13.541622] cx88[0]: card=8 -> Leadtek Winfast DV2000
[ 13.541625] cx88[0]: card=9 -> Leadtek PVR 2000
[ 13.541627] cx88[0]: card=10 -> IODATA GV-VCP3/PCI
[ 13.541629] cx88[0]: card=11 -> Prolink PlayTV PVR
[ 13.541632] cx88[0]: card=12 -> ASUS PVR-416
[ 13.541634] cx88[0]: card=13 -> MSI TV-@nywhere
[ 13.541637] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
[ 13.541639] cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
[ 13.541642] cx88[0]: card=16 -> KWorld LTV883RF
[ 13.541644] cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
[ 13.541647] cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
[ 13.541649] cx88[0]: card=19 -> Conexant DVB-T reference design
[ 13.541652] cx88[0]: card=20 -> Provideo PV259
[ 13.541654] cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
[ 13.541657] cx88[0]: card=22 -> pcHDTV HD3000 HDTV
[ 13.541659] cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
[ 13.541662] cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
[ 13.541665] cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
[ 13.541668] cx88[0]: card=26 -> IODATA GV/BCTV7E
[ 13.541670] cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
[ 13.541673] cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
[ 13.541676] cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
[ 13.541678] cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
[ 13.541681] cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
[ 13.541684] cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
[ 13.541686] cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
[ 13.541689] cx88[0]: card=34 -> ATI HDTV Wonder
[ 13.541691] cx88[0]: card=35 -> WinFast DTV1000-T
[ 13.541694] cx88[0]: card=36 -> AVerTV 303 (M126)
[ 13.541696] cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S
[ 13.541699] cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S
[ 13.541701] cx88[0]: card=39 -> KWorld DVB-S 100
[ 13.541704] cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
[ 13.541707] cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
[ 13.541710] cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro
[ 13.541712] cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702
[ 13.541715] cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital
[ 13.541718] cx88[0]: card=45 -> KWorld HardwareMpegTV XPert
[ 13.541721] cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid
[ 13.541723] cx88[0]: card=47 -> pcHDTV HD5500 HDTV
[ 13.541726] cx88[0]: card=48 -> Kworld MCE 200 Deluxe
[ 13.541728] cx88[0]: card=49 -> PixelView PlayTV P7000
[ 13.541731] cx88[0]: card=50 -> NPG Tech Real TV FM Top 10
[ 13.541733] cx88[0]: card=51 -> WinFast DTV2000 H ver. I (old)
[ 13.541736] cx88[0]: card=52 -> Geniatech DVB-S
[ 13.541738] cx88[0]: card=53 -> Hauppauge WinTV-HVR3000 TriMode Analog/DVB-S/DVB-T
[ 13.541741] cx88[0]: card=54 -> Norwood Micro TV Tuner
[ 13.541744] cx88[0]: card=55 -> Shenzhen Tungsten Ages Tech TE-DTV-250 / Swann OEM
[ 13.541747] cx88[0]: card=56 -> Hauppauge WinTV-HVR1300 DVB-T/Hybrid MPEG Encoder
[ 13.541750] cx88[0]: card=57 -> ADS Tech Instant Video PCI
[ 13.541753] cx88[0]: card=58 -> Pinnacle PCTV HD 800i
[ 13.541755] cx88[0]: card=59 -> DViCO FusionHDTV 5 PCI nano
[ 13.541758] cx88[0]: card=60 -> Pinnacle Hybrid PCTV
[ 13.541760] cx88[0]: card=61 -> Winfast TV2000 XP Global
[ 13.541763] cx88[0]: card=62 -> PowerColor RA330
[ 13.541765] cx88[0]: card=63 -> Geniatech X8000-MT DVBT
[ 13.541768] cx88[0]: card=64 -> DViCO FusionHDTV DVB-T PRO
[ 13.541770] cx88[0]: card=65 -> DViCO FusionHDTV 7 Gold
[ 13.541773] cx88[0]: card=66 -> Prolink Pixelview MPEG 8000GT
[ 13.541776] cx88[0]: card=67 -> Kworld PlusTV HD PCI 120 (ATSC 120)
[ 13.541778] cx88[0]: card=68 -> WinFast DTV2000 H ver. J (new)
[ 13.541782] cx88[0]: subsystem: 1461:001b, board: UNKNOWN/GENERIC [card=0,autodetected]
[ 13.541785] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 13.554243] parport_pc 00:07: reported by Plug and Play ACPI
[ 13.554337] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 13.851280] nvidia: module license 'NVIDIA' taints kernel.
[ 14.592385] tuner' 0-0043: chip found @ 0x86 (cx88[0])
[ 14.719506] tda9887 0-0043: creating new instance
[ 14.719511] tda9887 0-0043: tda988[5/6/7] found
[ 14.848101] All bytes are equal. It is not a TEA5767
[ 14.848179] tuner' 0-0060: chip found @ 0xc0 (cx88[0])
[ 14.886532] cx88[0]/0: found at 0000:00:0b.0, rev: 5, irq: 16, latency: 64, mmio: 0xf8000000
[ 14.886751] cx88[0]/0: registered device video0 [v4l2]
[ 14.887457] cx88[0]/0: registered device vbi0
[ 14.887477] tuner' 0-0060: tuner type not set
....

δοκιμασε καταρχην να τρεξεις

Κώδικας: Επιλογή όλων

gstreamer-properties

και στην επιλογη για video input να δοκιμασεις τις διαφορες εναλλακτικες που υπαρχουν.

Επειτα αν δεν δουλεψει δοκιμασε να κλεισεις τον οδηγο της καρτας και να τον ξανανοιξεις με την παραμετρο
card=6
για να τον κλεισεις τρεχεις

Κώδικας: Επιλογή όλων

sudo modprobe -r modulename

και για να τον ξανανοιξεις

Κώδικας: Επιλογή όλων

sudo modprobe modulename card=6

οπου modulename πρεπει να βαλεις το ονομα του οδηγου που θα βρεις στο αποτελεσμα της εντολής

Κώδικας: Επιλογή όλων

lsmod |grep cx88

[tagtheodor]

Καλημερα.
Θα τα κανω τα παραπανω ομως
με ποιο προγραμμα να δοκινασω να δω ομως TV?

[logari81]

καθε δοκιμη επανελαβε την με περισσοτερα του ενος προγρμματα π.χ.
tvtime, xawtv, mythtv

[tagtheodor]

Μπορεις να μου πεις ποιος ειναι ο οδηγος εδω?
Ειμαι λιγο νεος στο linux γι'αυτο.

Κώδικας: Επιλογή όλων


cx8800 38208 0
cx88xx 75944 1 cx8800
ir_common 48900 1 cx88xx
i2c_algo_bit 14340 1 cx88xx
tveeprom 20228 1 cx88xx
videodev 41344 3 tuner,cx8800,cx88xx
compat_ioctl32 9344 1 cx8800
v4l2_common 19840 2 tuner,cx8800
i2c_core 31892 10 tea5767,i2c_viapro,tda9887,tda8290,tuner,nvidia,cx88xx,i2c_algo_bit,tveeprom,v4l2_common
videobuf_dma_sg 20612 2 cx8800,cx88xx
videobuf_core 26628 3 cx8800,cx88xx,videobuf_dma_sg
btcx_risc 12552 2 cx8800,cx88xx


[logari81]

κι εγω δεν γνωριζω ακριβως, δοκιμασε με τα
cx8800
και
cx88xx
Οταν κλεινεις το ενα λογικα κλεινει και το αλλο, μετα απο καθε αλλαγη μπορεις να τσεκαρεις με το lsmod .... το τι εχει κλεισει/ανοιξει και να βγαλεις καποια συμπερασματα για το ποιο απο τα δυο πρεπει να κλεισεις και να ξαναανοιξεις. Επίσης μια ματια στις τελευταιες γραμες του /var/log/dmesg μετα απο καθε αλλαγη θα σε βοηθησει να καταλαβεις τι επιδραση ειχε η αλλαγη που εκανες.

[tagtheodor]

Μονο τον cx88xx δεχετε. Μαλλον αυτος ειναι ο οδηγος αλλα δεν κανει καμια αλλαγη μεσα στο αρχειο που μου ειπες
δηλαδη παραμενει card=0.
Τωρα?
Μπορω μηπως να αλλαξω την παραμετρο μεσα στο αρχειο μονος ή ειναι βλακεια αυτο?

[tagtheodor]

Τελικα την ειδε την καρτα αλλα τωρα το προβλημα ειναι οτι δεν βλεπει συχνοτητα και μ'αφηνει με μπλε οθονη το Tvtime.
Προσπαθω να κανω αναζητηση συχνοτητας και λεει " No frequency "

Μπορει να βοηθησει εδω κανεις?