Logitech Cam

[jimver]

Χαίρεται!

Πριν λίγες μέρες εγκατέστησα κι εγώ το ubuntu 9.04 και μπορώ να πώ οτι έχω μείνει εθουσιασμένος με την απόδοση και την σταθερότητά τους. Το μόνο πρόβλημα ποθ αντιμετωπίζω είναι οτι δεν βρίσκει την webcam μου. Έχω την Logitech quickcam messenger plus, την οποία γενικά την αναγνωρίζει το σύστημα όταν δίνω την εντολή "lsusb". Έχω φάει μια μέρα να ψάχνω στο ίντερνετ μήπως και βρώ τίποτα, άλλα δεν έχει δουλέψει κάτι μέχρι στιγμής. Έχω το cheese σαν πρόγραμμα καταγραφής video και ό,τι και να έκανα μόλις το ανοίγω μου λέει no camera found και ως εκεί. Έχετε καμία ιδέα?

Ευχαριστώ πολύ

[linuxman]

Πως έκανες την εγκατάσταση κανονική η μέσα από τα παράθυρα ?
Έκανες πλήρης αναβάθμιση ?

[jimver]

Αναβάθμιση στην αρχή του συστήματος εννοείς? Έκανα τα updates που μου έβγαλε στην αρχη

[linuxman]

Αναβάθμιση στην αρχή του συστήματος εννοείς? Έκανα τα updates που μου έβγαλε στην αρχη

Εγκατάσταση πως έκανες ?

[logari81]

ο linuxman εννοεί αν την εγκατασταση την έκανες μεσα από τα windows ή κανονική;

επίσης δώσε μας το αποτελεσμα της εντολής

Κώδικας: Επιλογή όλων

lsusb

[jimver]

Την εγκατάσταση την έκανα κανονικά σε άδειο σκληρό μέσω του live-cd.

Το αποτέλεσμα του lsusb είναι

Κώδικας: Επιλογή όλων

Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 002: ID 046d:08f6 Logitech, Inc. Quickcam Messenger Plus
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


[Snowflake]

Καλησπέρα! Έχω ακριβώς το ίδιο πρόβλημα. Την έκανα εγκατάσταση μέσω Windows μιας και για το ubuntu δε μπορούσα να βρω υποστήριξη στον ιστότοπο της Logitech. Στα Windows δουλεύει κανονικά, στο ubuntu όχι. Έχω κάνει όλα τα προτεινόμενα updates που εμφανίζονται ανά καιρούς.

Κώδικας: Επιλογή όλων

snowflake@Vincent:~$ lsusb
Bus 008 Device 003: ID 046d:08f6 Logitech, Inc. Quickcam Messenger Plus
Bus 008 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


[grimm]

Καλησπέρα.

Ρίξε μια ματιά στο παρακάτω link, ίσως σε βοηθήσει:
http://ubuntuforums.org/showthread.php?t=191770

[logari81]

δεν νομίζω να δουλεψει το προηγουμενο, ειναι αρκετα παλιο και στο ενδιαμεσο εχουν γινει πολλες αλλαγες στον πηρύνα. Μια καλή πηγη πληροφοριών για την επίλυση του προβλήματος ειναι αυτη
https://bugs.launchpad.net/ubuntu/+sour ... bug/209901

@jimver
@Snowflake
παρακαλω πριν πειράξετε οτιδήποτε απο αυτά που αναφερονται στο λινκ του grimm ποσταρετε το αποτελεσμα των εντολών

Κώδικας: Επιλογή όλων

dmesg
lsmod

[Snowflake]

Ορίστε τα αποτελέσματα των εντολών, αν και στο dmesg χάνονται τα πρώτα και δεν ξέρω πώς να τα εμφανίσω για να τα επικολλήσω.

Κώδικας: Επιλογή όλων

[ 0.378149] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.378152] pci 0000:00:1b.0: PME# disabled
[ 0.378186] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.378189] pci 0000:00:1c.0: PME# disabled
[ 0.378226] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.378229] pci 0000:00:1c.4: PME# disabled
[ 0.378264] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.378267] pci 0000:00:1c.5: PME# disabled
[ 0.378309] pci 0000:00:1d.0: reg 20 io port: [0xc080-0xc09f]
[ 0.378357] pci 0000:00:1d.1: reg 20 io port: [0xc400-0xc41f]
[ 0.378405] pci 0000:00:1d.2: reg 20 io port: [0xc480-0xc49f]
[ 0.378456] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7fff800-0xf7fffbff]
[ 0.378486] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.378490] pci 0000:00:1d.7: PME# disabled
[ 0.378608] pci 0000:00:1f.2: reg 10 io port: [0xb000-0xb007]
[ 0.378612] pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03]
[ 0.378616] pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887]
[ 0.378620] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
[ 0.378624] pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa48f]
[ 0.378629] pci 0000:00:1f.2: reg 24 io port: [0xa400-0xa40f]
[ 0.378655] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf7fff400-0xf7fff4ff]
[ 0.378666] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.378698] pci 0000:00:1f.5: reg 10 io port: [0xc000-0xc007]
[ 0.378702] pci 0000:00:1f.5: reg 14 io port: [0xbc00-0xbc03]
[ 0.378706] pci 0000:00:1f.5: reg 18 io port: [0xb880-0xb887]
[ 0.378710] pci 0000:00:1f.5: reg 1c io port: [0xb800-0xb803]
[ 0.378715] pci 0000:00:1f.5: reg 20 io port: [0xb480-0xb48f]
[ 0.378719] pci 0000:00:1f.5: reg 24 io port: [0xb400-0xb40f]
[ 0.378753] pci 0000:01:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.378759] pci 0000:01:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
[ 0.378765] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfd000000-0xfdffffff]
[ 0.378772] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
[ 0.378807] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfe8fffff]
[ 0.378810] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.378844] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf6f00000-0xf6ffffff]
[ 0.378881] pci 0000:03:00.0: reg 10 io port: [0xec00-0xec07]
[ 0.378888] pci 0000:03:00.0: reg 14 io port: [0xe880-0xe883]
[ 0.378894] pci 0000:03:00.0: reg 18 io port: [0xe800-0xe807]
[ 0.378901] pci 0000:03:00.0: reg 1c io port: [0xe480-0xe483]
[ 0.378907] pci 0000:03:00.0: reg 20 io port: [0xe400-0xe40f]
[ 0.378914] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeaffc00-0xfeafffff]
[ 0.378929] pci 0000:03:00.0: supports D1
[ 0.378931] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.378934] pci 0000:03:00.0: PME# disabled
[ 0.378971] pci 0000:00:1c.4: bridge io port: [0xe000-0xefff]
[ 0.378974] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.379021] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9c0000-0xfe9fffff]
[ 0.379028] pci 0000:02:00.0: reg 18 io port: [0xdc00-0xdc7f]
[ 0.379059] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.379063] pci 0000:02:00.0: PME# disabled
[ 0.379101] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
[ 0.379104] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.379136] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
[ 0.379167] pci 0000:05:03.0: supports D1 D2
[ 0.379168] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
[ 0.379171] pci 0000:05:03.0: PME# disabled
[ 0.379205] pci 0000:00:1e.0: transparent bridge
[ 0.379209] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.379228] bus 00 -> node 0
[ 0.379232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.379421] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.379499] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.379632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.379709] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.379796] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.393243] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.393341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.393437] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.393532] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.393628] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.393724] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.393820] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.393915] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.394012] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - FE, should be F5 [20080926]
[ 0.394055] ACPI: WMI: Mapper loaded
[ 0.394077] SCSI subsystem initialized
[ 0.394077] libata version 3.00 loaded.
[ 0.394077] usbcore: registered new interface driver usbfs
[ 0.394077] usbcore: registered new interface driver hub
[ 0.394077] usbcore: registered new device driver usb
[ 0.394077] PCI: Using ACPI for IRQ routing
[ 0.400008] Bluetooth: Core ver 2.13
[ 0.400021] NET: Registered protocol family 31
[ 0.400021] Bluetooth: HCI device and connection manager initialized
[ 0.400021] Bluetooth: HCI socket layer initialized
[ 0.400021] NET: Registered protocol family 8
[ 0.400021] NET: Registered protocol family 20
[ 0.400031] NetLabel: Initializing
[ 0.400032] NetLabel: domain hash size = 128
[ 0.400034] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.400045] NetLabel: unlabeled traffic allowed by default
[ 0.400057] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.400062] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.404048] AppArmor: AppArmor Filesystem Enabled
[ 0.412008] pnp: PnP ACPI init
[ 0.412015] ACPI: bus type pnp registered
[ 0.414599] pnp: PnP ACPI: found 17 devices
[ 0.414601] ACPI: ACPI bus type pnp unregistered
[ 0.414603] PnPBIOS: Disabled by ACPI PNP
[ 0.414609] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.414614] system 00:07: ioport range 0x290-0x29f has been reserved
[ 0.414618] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.414620] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.414621] system 00:08: ioport range 0x500-0x57f has been reserved
[ 0.414623] system 00:08: iomem range 0xfed08000-0xfed08fff has been reserved
[ 0.414625] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.414627] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.414628] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
[ 0.414632] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved
[ 0.414636] system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.414638] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.414642] system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.414645] system 00:10: iomem range 0x0-0x9ffff could not be reserved
[ 0.414647] system 00:10: iomem range 0xc0000-0xcffff could not be reserved
[ 0.414649] system 00:10: iomem range 0xe0000-0xfffff could not be reserved
[ 0.414650] system 00:10: iomem range 0x100000-0x7fffffff could not be reserved
[ 0.449272] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.449273] pci 0000:00:01.0: IO window: disabled
[ 0.449276] pci 0000:00:01.0: MEM window: 0xf8000000-0xfe8fffff
[ 0.449278] pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
[ 0.449281] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
[ 0.449282] pci 0000:00:1c.0: IO window: disabled
[ 0.449286] pci 0000:00:1c.0: MEM window: disabled
[ 0.449289] pci 0000:00:1c.0: PREFETCH window: 0x000000f6f00000-0x000000f6ffffff
[ 0.449293] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 0.449295] pci 0000:00:1c.4: IO window: 0xe000-0xefff
[ 0.449299] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
[ 0.449301] pci 0000:00:1c.4: PREFETCH window: disabled
[ 0.449306] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
[ 0.449308] pci 0000:00:1c.5: IO window: 0xd000-0xdfff
[ 0.449311] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
[ 0.449314] pci 0000:00:1c.5: PREFETCH window: disabled
[ 0.449318] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.449319] pci 0000:00:1e.0: IO window: disabled
[ 0.449323] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
[ 0.449325] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.449334] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.449337] pci 0000:00:01.0: setting latency timer to 64
[ 0.449342] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.449345] pci 0000:00:1c.0: setting latency timer to 64
[ 0.449349] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.449352] pci 0000:00:1c.4: setting latency timer to 64
[ 0.449357] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.449360] pci 0000:00:1c.5: setting latency timer to 64
[ 0.449364] pci 0000:00:1e.0: setting latency timer to 64
[ 0.449367] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.449368] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.449370] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.449371] bus: 01 index 1 mmio: [0xf8000000-0xfe8fffff]
[ 0.449372] bus: 01 index 2 mmio: [0xd8000000-0xdfffffff]
[ 0.449373] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.449375] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.449376] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.449377] bus: 04 index 2 mmio: [0xf6f00000-0xf6ffffff]
[ 0.449378] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.449379] bus: 03 index 0 io port: [0xe000-0xefff]
[ 0.449381] bus: 03 index 1 mmio: [0xfea00000-0xfeafffff]
[ 0.449382] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.449383] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.449384] bus: 02 index 0 io port: [0xd000-0xdfff]
[ 0.449386] bus: 02 index 1 mmio: [0xfe900000-0xfe9fffff]
[ 0.449387] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.449388] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.449389] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.449390] bus: 05 index 1 mmio: [0xfeb00000-0xfebfffff]
[ 0.449392] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.449393] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.449394] bus: 05 index 4 mmio: [0x000000-0xffffffff]
[ 0.449399] NET: Registered protocol family 2
[ 0.464052] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.464215] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.464415] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.464513] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.464515] TCP reno registered
[ 0.468069] NET: Registered protocol family 1
[ 0.468156] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504010] Switched to high resolution mode on CPU 0
[ 0.661888] it is
[ 0.869465] Freeing initrd memory: 7375k freed
[ 0.869609] cpufreq: No nForce2 chipset.
[ 0.869704] audit: initializing netlink socket (disabled)
[ 0.869720] type=2000 audit(1245601709.868:1): initialized
[ 0.874549] highmem bounce pool size: 64 pages
[ 0.874552] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.875384] VFS: Disk quotas dquot_6.5.1
[ 0.875420] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.875799] fuse init (API version 7.10)
[ 0.875851] msgmni has been set to 1698
[ 0.875966] alg: No test for stdrng (krng)
[ 0.875973] io scheduler noop registered
[ 0.875974] io scheduler anticipatory registered
[ 0.875975] io scheduler deadline registered
[ 0.875984] io scheduler cfq registered (default)
[ 0.876106] pci 0000:01:00.0: Boot video device
[ 0.877848] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.877870] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.877886] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 0.877892] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.877900] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.877930] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.877955] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.877972] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 0.877980] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.877987] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.877998] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.878039] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.878064] pcieport-driver 0000:00:1c.4: found MSI capability
[ 0.878081] pcieport-driver 0000:00:1c.4: irq 2301 for MSI/MSI-X
[ 0.878089] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 0.878096] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 0.878106] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 0.878144] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 0.878169] pcieport-driver 0000:00:1c.5: found MSI capability
[ 0.878186] pcieport-driver 0000:00:1c.5: irq 2300 for MSI/MSI-X
[ 0.878194] pci_express 0000:00:1c.5:pcie00: allocate port service
[ 0.878202] pci_express 0000:00:1c.5:pcie02: allocate port service
[ 0.878209] pci_express 0000:00:1c.5:pcie03: allocate port service
[ 0.878255] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.878557] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.878654] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.878656] ACPI: Power Button (FF) [PWRF]
[ 0.878688] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.878690] ACPI: Power Button (CM) [PWRB]
[ 0.879097] ACPI: SSDT 7FF7E0D0, 0277 (r1 DpgPmm P001Ist 11 INTL 20060113)
[ 0.879332] processor ACPI_CPU:00: registered as cooling_device0
[ 0.879578] ACPI: SSDT 7FF7E350, 0277 (r1 DpgPmm P002Ist 12 INTL 20060113)
[ 0.879805] processor ACPI_CPU:01: registered as cooling_device1
[ 0.881598] isapnp: Scanning for PnP cards...
[ 1.234329] isapnp: No Plug & Play device found
[ 1.240665] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.240743] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.241055] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.241543] brd: module loaded
[ 1.241736] loop: module loaded
[ 1.241777] Fixed MDIO Bus: probed
[ 1.241781] PPP generic driver version 2.4.2
[ 1.241815] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.241834] Driver 'sd' needs updating - please use bus_type methods
[ 1.241840] Driver 'sr' needs updating - please use bus_type methods
[ 1.241869] ahci 0000:03:00.0: version 3.0
[ 1.241893] ata_piix 0000:00:1f.2: version 2.12
[ 1.241903] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.241906] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.241937] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.241974] scsi0 : ata_piix
[ 1.242020] scsi1 : ata_piix
[ 1.243026] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 1.243030] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 2.036052] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.036064] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.052361] ata1.00: ATA-8: Hitachi HDP725032GLA360, GM3OA52A, max UDMA/133
[ 2.052363] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.053366] ata1.01: ATA-7: Maxtor 6L250S0, BACE1G20, max UDMA/133
[ 2.053369] ata1.01: 490234752 sectors, multi 0: LBA48 NCQ (depth 0/32)
[ 2.068375] ata1.00: configured for UDMA/133
[ 2.085147] ata1.01: configured for UDMA/133
[ 2.880052] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.880062] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 2.906488] ata2.00: ATA-8: WDC WD3200AAKS-00YGA0, 12.01C02, max UDMA/133
[ 2.906490] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.912762] ata2.00: configured for UDMA/133
[ 2.912853] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72503 GM3O PQ: 0 ANSI: 5
[ 2.912914] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.912925] sd 0:0:0:0: [sda] Write Protect is off
[ 2.912926] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.912942] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.912980] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.912989] sd 0:0:0:0: [sda] Write Protect is off
[ 2.912991] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.913006] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.913008] sda: sda1 sda3 < sda5 sda6 >
[ 2.947953] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.947979] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.948022] scsi 0:0:1:0: Direct-Access ATA Maxtor 6L250S0 BACE PQ: 0 ANSI: 5
[ 2.948073] sd 0:0:1:0: [sdb] 490234752 512-byte hardware sectors: (251 GB/233 GiB)
[ 2.948082] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.948084] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.948099] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.948129] sd 0:0:1:0: [sdb] 490234752 512-byte hardware sectors: (251 GB/233 GiB)
[ 2.948138] sd 0:0:1:0: [sdb] Write Protect is off
[ 2.948139] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.948155] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.948157] sdb: sdb1
[ 2.971074] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 2.971108] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 2.971156] scsi 1:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5
[ 2.971210] sd 1:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.971219] sd 1:0:0:0: [sdc] Write Protect is off
[ 2.971221] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.971236] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.971267] sd 1:0:0:0: [sdc] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 2.971276] sd 1:0:0:0: [sdc] Write Protect is off
[ 2.971277] sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.971292] sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.971294] sdc: sdc1 sdc2
[ 2.977596] sd 1:0:0:0: [sdc] Attached SCSI disk
[ 2.977628] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 2.977639] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.977641] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 2.977667] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 2.977693] scsi2 : ata_piix
[ 2.977725] scsi3 : ata_piix
[ 2.978504] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19
[ 2.978507] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19
[ 3.306508] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.634508] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.634778] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.634797] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 3.634836] scsi4 : pata_marvell
[ 3.634871] scsi5 : pata_marvell
[ 3.634891] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 3.634893] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[ 3.820354] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 3.820378] ata5.01: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS02, max UDMA/33
[ 3.836367] ata5.00: configured for UDMA/33
[ 3.868367] ata5.01: configured for UDMA/33
[ 4.038885] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 4.043762] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 4.043765] Uniform CD-ROM driver Revision: 3.20
[ 4.043839] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 4.043871] sr 4:0:0:0: Attached scsi generic sg3 type 5
[ 4.044435] scsi 4:0:1:0: CD-ROM TSSTcorp DVD-ROM SH-D162C TS02 PQ: 0 ANSI: 5
[ 4.073729] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 4.073786] sr 4:0:1:0: Attached scsi CD-ROM sr1
[ 4.073826] sr 4:0:1:0: Attached scsi generic sg4 type 5
[ 4.073978] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.073990] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.073999] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.074002] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.074037] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.077927] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.077931] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.077940] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf7fffc00
[ 4.092008] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.092065] usb usb1: configuration #1 chosen from 1 choice
[ 4.092091] hub 1-0:1.0: USB hub found
[ 4.092098] hub 1-0:1.0: 6 ports detected
[ 4.092171] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.092178] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.092180] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.092204] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.096089] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.096093] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.096101] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7fff800
[ 4.108008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.108058] usb usb2: configuration #1 chosen from 1 choice
[ 4.108081] hub 2-0:1.0: USB hub found
[ 4.108087] hub 2-0:1.0: 6 ports detected
[ 4.108158] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.108168] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.108179] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.108183] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.108185] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.108213] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.108231] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 4.108276] usb usb3: configuration #1 chosen from 1 choice
[ 4.108292] hub 3-0:1.0: USB hub found
[ 4.108299] hub 3-0:1.0: 2 ports detected
[ 4.108348] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.108352] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.108354] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.108378] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.108400] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 4.108446] usb usb4: configuration #1 chosen from 1 choice
[ 4.108461] hub 4-0:1.0: USB hub found
[ 4.108465] hub 4-0:1.0: 2 ports detected
[ 4.108513] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.108518] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 4.108520] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.108549] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.108566] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 4.108609] usb usb5: configuration #1 chosen from 1 choice
[ 4.108623] hub 5-0:1.0: USB hub found
[ 4.108627] hub 5-0:1.0: 2 ports detected
[ 4.108678] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.108682] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.108684] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.108712] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.108729] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 4.108771] usb usb6: configuration #1 chosen from 1 choice
[ 4.108788] hub 6-0:1.0: USB hub found
[ 4.108792] hub 6-0:1.0: 2 ports detected
[ 4.108841] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.108846] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.108848] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.108873] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.108890] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 4.108936] usb usb7: configuration #1 chosen from 1 choice
[ 4.108951] hub 7-0:1.0: USB hub found
[ 4.108955] hub 7-0:1.0: 2 ports detected
[ 4.109008] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.109012] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.109014] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.109040] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.109057] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 4.109100] usb usb8: configuration #1 chosen from 1 choice
[ 4.109115] hub 8-0:1.0: USB hub found
[ 4.109121] hub 8-0:1.0: 2 ports detected
[ 4.109207] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.109208] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 4.109577] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.112035] mice: PS/2 mouse device common for all mice
[ 4.112148] rtc_cmos 00:03: RTC can wake from S4
[ 4.112166] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.112186] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.112222] device-mapper: uevent: version 1.0.3
[ 4.112270] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.112310] device-mapper: multipath: version 1.0.5 loaded
[ 4.112312] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.112357] EISA: Probing bus 0 at eisa.0
[ 4.112377] EISA: Detected 0 cards.
[ 4.112405] cpuidle: using governor ladder
[ 4.112406] cpuidle: using governor menu
[ 4.112714] TCP cubic registered
[ 4.112775] NET: Registered protocol family 10
[ 4.113053] lo: Disabled Privacy Extensions
[ 4.113261] NET: Registered protocol family 17
[ 4.113272] Bluetooth: L2CAP ver 2.11
[ 4.113273] Bluetooth: L2CAP socket layer initialized
[ 4.113274] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.113275] Bluetooth: SCO socket layer initialized
[ 4.113293] Bluetooth: RFCOMM socket layer initialized
[ 4.113297] Bluetooth: RFCOMM TTY layer initialized
[ 4.113298] Bluetooth: RFCOMM ver 1.10
[ 4.113706] Using IPI No-Shortcut mode
[ 4.113744] registered taskstats version 1
[ 4.113823] Magic number: 13:201:490
[ 4.113861] rtc_cmos 00:03: setting system clock to 2009-06-21 16:28:33 UTC (1245601713)
[ 4.113863] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.113864] EDD information not available.
[ 4.114021] Freeing unused kernel memory: 532k freed
[ 4.114095] Write protecting the kernel text: 4112k
[ 4.114121] Write protecting the kernel read-only data: 1524k
[ 4.148278] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 4.245914] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.245925] ATL1E 0000:02:00.0: setting latency timer to 64
[ 4.370938] ohci1394 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 4.421669] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
[ 4.445672] Floppy drive(s): fd0 is 1.44M
[ 4.463760] FDC 0 is a post-1991 82077
[ 4.850715] PM: Starting manual resume from disk
[ 4.850717] PM: Resume from partition 8:6
[ 4.850718] PM: Checking hibernation image.
[ 4.850823] PM: Resume from disk failed.
[ 4.860012] usb 8-1: new low speed USB device using uhci_hcd and address 2
[ 4.871023] EXT4-fs: barriers enabled
[ 4.886123] kjournald2 starting. Commit interval 5 seconds
[ 4.886128] EXT4-fs: delayed allocation enabled
[ 4.886131] EXT4-fs: file extents enabled
[ 4.891623] EXT4-fs: mballoc enabled
[ 4.891626] EXT4-fs: mounted filesystem with ordered data mode.
[ 5.051215] usb 8-1: configuration #1 chosen from 1 choice
[ 5.292011] usb 8-2: new full speed USB device using uhci_hcd and address 3
[ 5.480233] usb 8-2: configuration #1 chosen from 1 choice
[ 5.716086] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00014cf032]
[ 8.064439] udev: starting version 141
[ 8.346303] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 8.377221] Linux agpgart interface v0.103
[ 8.505433] nvidia: module license 'NVIDIA' taints kernel.
[ 8.756721] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 8.756727] nvidia 0000:01:00.0: setting latency timer to 64
[ 8.757273] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[ 9.178924] iTCO_vendor_support: vendor-support=0
[ 9.190395] usbcore: registered new interface driver hiddev
[ 9.191292] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 9.191362] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 9.191407] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.205659] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input5
[ 9.208341] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-1/input0
[ 9.208353] usbcore: registered new interface driver usbhid
[ 9.208367] usbhid: v2.6:USB HID core driver
[ 9.313457] Linux video capture interface: v2.00
[ 9.355062] quickcam: QuickCam USB camera found (driver version QuickCam USB 0.6.6 $Date: 2006/11/04 08:38:14 $)
[ 9.355064] quickcam: Kernel:2.6.28-13-generic bus:8 class:FF subclass:FF vendor:046D product:08F6
[ 9.358487] usbcore: registered new interface driver quickcam
[ 9.409311] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 9.409378] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9.444771] usbcore: registered new interface driver snd-usb-audio
[ 9.580181] lp: driver loaded but no devices found
[ 9.637006] Adding 3204896k swap on /dev/sda6. Priority:-1 extents:1 across:3204896k
[ 10.158334] EXT4 FS on sda1, internal journal on sda1:8
[ 11.163088] kjournald starting. Commit interval 5 seconds
[ 11.163299] EXT3 FS on sda5, internal journal
[ 11.163304] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.176079] kjournald starting. Commit interval 5 seconds
[ 11.176270] EXT3 FS on sdb1, internal journal
[ 11.176274] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.179631] kjournald starting. Commit interval 5 seconds
[ 11.179876] EXT3 FS on sdc1, internal journal
[ 11.179880] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.485366] type=1505 audit(1245590920.870:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2195
[ 11.513220] type=1505 audit(1245590920.898:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2199
[ 11.513271] type=1505 audit(1245590920.898:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2199
[ 11.513297] type=1505 audit(1245590920.898:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2199
[ 11.513321] type=1505 audit(1245590920.898:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2199
[ 11.590481] type=1505 audit(1245590920.974:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2204
[ 11.590559] type=1505 audit(1245590920.974:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2204
[ 11.606765] type=1505 audit(1245590920.990:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2208
[ 13.379311] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 13.379313] Bluetooth: BNEP filters: protocol multicast
[ 13.398085] Bridge firewalling registered
[ 14.601511] ppdev: user-space parallel port driver
[ 18.613926] ATL1E 0000:02:00.0: irq 2299 for MSI/MSI-X
[ 18.614153] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.614894] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 18.615001] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 29.224004] eth0: no IPv6 routers present
[ 31.410952] UDF-fs: No VRS found
[ 31.428695] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 31.430275] ISOFS: changing to secondary root


και

Κώδικας: Επιλογή όλων

snowflake@Vincent:~$ lsmod
Module Size Used by
isofs 39844 1
udf 87716 0
crc_itu_t 10112 1 udf
binfmt_misc 16776 1
ppdev 15620 0
bridge 56340 0
stp 10500 1 bridge
bnep 20224 2
input_polldev 11912 0
video 25360 0
output 11008 1 video
lp 17156 0
parport 42220 2 ppdev,lp
snd_usb_audio 90400 1
snd_hda_intel 434100 5
snd_pcm_oss 46336 0
snd_mixer_oss 22656 1 snd_pcm_oss
snd_seq_dummy 10756 0
snd_pcm 82948 4 snd_usb_audio,snd_hda_intel,snd_pcm_oss
quickcam 80928 0
snd_seq_oss 37760 0
snd_usb_lib 24320 1 snd_usb_audio
videodev 41600 1 quickcam
v4l1_compat 21764 1 videodev
snd_seq_midi 14336 0
snd_seq_midi_event 15104 2 snd_seq_oss,snd_seq_midi
snd_rawmidi 29696 2 snd_usb_lib,snd_seq_midi
snd_seq 56880 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 29704 2 snd_pcm,snd_seq
snd_seq_device 14988 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_hwdep 15108 1 snd_usb_audio
iTCO_wdt 19108 0
usbhid 42336 0
iTCO_vendor_support 11652 1 iTCO_wdt
snd 62628 22 snd_usb_audio,snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device,snd_hwdep
soundcore 15200 1 snd
snd_page_alloc 16904 2 snd_hda_intel,snd_pcm
nvidia 7233756 36
intel_agp 34108 0
agpgart 42696 2 nvidia,intel_agp
pcspkr 10496 0
floppy 64324 0
ohci1394 38576 0
ieee1394 94660 1 ohci1394
atl1e 40212 0
fbcon 46112 0
tileblit 10752 1 fbcon
font 16384 1 fbcon
bitblit 13824 1 fbcon
softcursor 9984 1 bitblit


Ο σύνδεσμος του grimm δίνει κάποιες λύσεις οι οποίες ίσως είναι "απαρχαιωμένες", όσον αφορά το δικό σου logari81 δεν καταλαβαίνω πώς μπορεί να με βοηθήσει μιας και δεν δίνει κάποια σαφή απάντηση κατά τη γνώμη μου.