εγκατάσταση του Lexmark X6170(All in one)-ΕΠΙΛΥΘΗΚΕ

[markip]

ενταξει το μετεφερα στις τοποθεσιες και προχωρησα τη διαδικασια τωρα ομως κολλησα: παταω την εντολη

Κώδικας: Επιλογή όλων

cd /usr/share/cups/model

και μου βγαζει αυτο

Κώδικας: Επιλογή όλων

user@user-desktop:/usr/share/cups/model$

τωρα τι κανω?

[linuxman]

Στο Readme τι γράφει όταν είσαι μέσ στο φάκελο ?

[markip]

αυτα γραφει:

Κώδικας: Επιλογή όλων

INTRODUCTION
============

This is Z55 CUPS Printer Driver version 1.0-1, the first stable
release. Z55 CUPS Printer Driver is a printer driver that may be
used with most common UNIX print spooling systems, including CUPS,
lpr, LPRng, or others. This driver provides high quality printing
for Linux and UNIX systems and can be used for many of the most
demanding printing tasks.

Z55 CUPS Printer Driver was built using the Lexmark Linux Printer
Driver Developer's Kit (LLPDDK) binaries. Please check out our website
at http://support.lexmark.com/en/ldk/index.htm for more details.


LICENSE
=======

Z55 CUPS Printer Driver is distributed under Lexmark's End User
License Agreement (EULA). Please refer to the file COPYING for more
information.


REQUIREMENTS
============

Z55 CUPS Printer Driver package requires these following libraries:
- CUPS development libraries
- tcl/tk development libraries


BASIC INSTALLATION
==================

Z55 CUPS Printer Driver package includes the following files:

- lexmarkz55-CUPS-1.0-1.gz.sh
- README
- COPYING

In general, to install Z55 CUPS Printer Driver, you run
the following command:

- tar xvfz CJLZ55LE-CUPS-1.0-1.TAR.GZ
- sh lexmarkz55-CUPS-1.0-1.gz.sh

Note: This printer driver was tested and verified in the following
distributions:

- Red Hat 8.0
- Red Hat 9.0
- Mandrake 9.0
- Mandrake 9.1
- SuSe 8.1
- SuSe 8.2


FAQ
===

1) Q: How can we print bitmap files?
A: To print bitmap files (bmp), it is necessary to include the
following line in the file /etc/cups/mime.convs:
"image/x-bitmap application/vnd.cups-raster 100 imagetoraster"
Restart the CUPS daemon for changes to take effect.

2) Q: What does the "Inkset" option mean?
A: The "Inkset" option is used to emulate the existence of the
cartridges installed in the printer device. If it is set to CMYK
or CMY or K, then the printer driver will assume that the printer
device has "both cartridges installed", or "only color cartridge
is installed" or "only black cartridge is installed" respectively.

3) Q: How do we recover or cancel the print job during paper out?
A: To recover the print job, restart the printer device (turn off
then turn on again) and the CUPS server (either by "service cups
restart" or "/etc/init.d/cups restart"). To cancel the print job
remove it manually either by using lprm or cancel commands.

4) Q: Why does changing the configuration (from the web server) during
a print job cause the printer device to jam? How do we recover
from this situation?
A: When changing the printer driver configuration using the CUPS web
server, CUPS will interrupt all print jobs. Unfortunately,
the Z55 CUPS printer driver inconsistently handles this scenario.
To recover from this situation, simply remove the paper jam by
restarting the printer device. CUPS will then automatically resend
the print job with the new configuration.

5) Q: How do we perform an alignment of cartridges?
A: There's a command line utility tool for aligning cartridges and other
utility functions. At the command line, type /usr/lib/cups/backend/z55 utilities.
A menu will be shown enumerating the different utility options.

6) Q: How do we perform cleaning of print nozzles?
A: There's a command line utility tool for cleaning the print nozzles and other
utility functions. At the command line, type /usr/lib/cups/backend/z55 utilities.
A menu will be shown enumerating the different utility options.

7) Q: How do we perform calibration of paper type sensor?
A: There's a command line utility tool for calibrating the paper type sensor and other
utility functions. At the command line, type /usr/lib/cups/backend/z55 utilities.
A menu will be shown enumerating the different utility options.

SUPPORT
=======

1) Read the FAQ section of this file. Your question may be answered
there.

2) Please report any problems to lcontact@lexmark.com


KNOWN ISSUES
============

* None so far.

τωρα τι κανω θα πατησω αυτα?

Κώδικας: Επιλογή όλων

In general, to install Z55 CUPS Printer Driver, you run
the following command:

- tar xvfz CJLZ55LE-CUPS-1.0-1.TAR.GZ
- sh lexmarkz55-CUPS-1.0-1.gz.sh


ΚΑΙ ΜΕ ΤΗΝ ΥΠΟΛΟΙΠΗ ΔΙΑΔΙΚΑΣΙΑ ΤΙ ΘΑ ΓΙΝΕΙ?

[linuxman]

Μάλλον δεν έκανες όλα παρακάτω

Κώδικας: Επιλογή όλων


# extract the driver.
tar -xvzf CJLZ55LE-CUPS-1.0-1.TAR.GZ

# fix the sh script, the sh script is broken for newer systems.
tail -n +143 lexmarkz55-CUPS-1.0-1.gz.sh > install.tar.gz

# extract the contents produced by tail
tar -xvzf install.tar.gz

# convert rpm packages to tgz. (ignore the warnings) για να το κάνεις εδώ πρέπει να εκτελέσεις πριν
sudo apt-get install alien ( και μετά τα παρακάτω )
sudo alien -t lexmarkz55-CUPS-1.0-1.i386.rpm
sudo alien -t z55llpddk-2.0-2.i386.rpm

# extract the tgz's to / putting the files in their right place
sudo tar xvzf z55llpddk-2.0.tgz -C /
sudo tar xvzf lexmarkz55-CUPS-1.0.tgz -C /

# refresh ubuntu to see the new libraries
sudo ldconfig

# change to the folder for the drivers
cd /usr/share/cups/model

# unzip the ppd, which should _not_ be gzipped
sudo gunzip Lexmark-Z600-lxz600cj-cups.ppd.gz

#The driver is now installed. Restart the cups daemon.
sudo /etc/rc2.d/S19cupsys restart

# Now run
/usr/lib/cups/backend/z55

You should be something like:
direct z55:/dev/usblp0 "Lexmark Lexmark X6100 Series" "Lexmark Printer"

Adding the printer:
In GNOME goto System->Administration->Printing
Do Add Printer
Selected the Lexmark printer that should be recognized
Click Next and choose Install Driver
Go to /usr/share/cups/model/ and choose the .ppd file located there.
The new driver will now be added to the list (Z55 v1.0-1)
Click next and change the name of the printer to X6170 (or whatever suites your needs)
(NOTE: I had to add the printer twice on mine for some reason, the first time didnt seem to actually add the printer)
Once the printer is shown, right click and go to properties then do a test page.
Done.


Και πάλη το λίνκ http://ubuntuforums.org/showthread.php?t=419661

[markip]

αυτο το ειχα κανει στην αρχη αφου κατεβασα το συμπιεσμενο και μετα εκανα αυτο

Κώδικας: Επιλογή όλων

sudo apt-get install alien

αν το εκανα λαθος μετα απο που να συνεχισω?

[linuxman]

αυτο το ειχα κανει στην αρχη αφου κατεβασα το συμπιεσμενο και μετα εκανα αυτο

Κώδικας: Επιλογή όλων

sudo apt-get install alien

αν το εκανα λαθος μετα απο που να συνεχισω?

Όχι καλά το έκανες
συνεχίζεις

Κώδικας: Επιλογή όλων


# convert rpm packages to tgz. (ignore the warnings)
sudo alien -t lexmarkz55-CUPS-1.0-1.i386.rpm
sudo alien -t z55llpddk-2.0-2.i386.rpm

# extract the tgz's to / putting the files in their right place
sudo tar xvzf z55llpddk-2.0.tgz -C /
sudo tar xvzf lexmarkz55-CUPS-1.0.tgz -C /

# refresh ubuntu to see the new libraries
sudo ldconfig

# change to the folder for the drivers
cd /usr/share/cups/model

# unzip the ppd, which should _not_ be gzipped
sudo gunzip Lexmark-Z600-lxz600cj-cups.ppd.gz

#The driver is now installed. Restart the cups daemon.
sudo /etc/rc2.d/S19cupsys restart

# Now run
/usr/lib/cups/backend/z55

You should be something like:
direct z55:/dev/usblp0 "Lexmark Lexmark X6100 Series" "Lexmark Printer"

Adding the printer:
In GNOME goto System->Administration->Printing
Do Add Printer
Selected the Lexmark printer that should be recognized
Click Next and choose Install Driver
Go to /usr/share/cups/model/ and choose the .ppd file located there.
The new driver will now be added to the list (Z55 v1.0-1)
Click next and change the name of the printer to X6170 (or whatever suites your needs)
(NOTE: I had to add the printer twice on mine for some reason, the first time didnt seem to actually add the printer)
Once the printer is shown, right click and go to properties then do a test page.
Done.


[markip]

την εκανα την διαδικασια απο την αρχη αλλα κολλαει παλι εκει που σου ειπα οριστε:

Κώδικας: Επιλογή όλων

user@user-desktop:~$ sudo alien -t lexmarkz55-CUPS-1.0-1.i386.rpm
[sudo] password for user:
Sorry, try again.
[sudo] password for user:
Warning: Skipping conversion of scripts in package lexmarkz55-CUPS: postinst postrm preinst
Warning: Use the --scripts parameter to include the scripts.
lexmarkz55-CUPS-1.0.tgz generated
user@user-desktop:~$ sudo alien -t z55llpddk-2.0-2.i386.rpm
Warning: Skipping conversion of scripts in package z55llpddk: postinst postrm preinst prerm
Warning: Use the --scripts parameter to include the scripts.
z55llpddk-2.0.tgz generated
user@user-desktop:~$ sudo tar xvzf z55llpddk-2.0.tgz -C /
./
./usr/
./usr/lib/
./usr/lib/liblexz55printer.a
./usr/lib/liblexz55printjob.la
./usr/lib/liblexz55printjob.a
./usr/lib/liblexz55core.so.0.0.0
./usr/lib/liblexz55printer.so.0.0.0
./usr/lib/liblexz55core.la
./usr/lib/liblexz55printer.la
./usr/lib/liblexz55core.a
./usr/lib/liblexz55printjob.so.0.0.0
./usr/include/
./usr/include/lexmark/
./usr/include/lexmark/printjobmanager.h
./usr/include/lexmark/linuxinkjetprinter.h
./usr/include/lexmark/errorcommunicator.h
./usr/include/lexmark/mediamanager.h
./usr/include/lexmark/cleaningdata.h
./usr/include/lexmark/portmonitor.h
./usr/include/lexmark/cartridgemanager.h
./usr/include/lexmark/cartridgeuserinterface.h
./usr/include/lexmark/printerdevice.h
./usr/include/lexmark/alignmentdata.h
./usr/include/lexmark/clock.h
./usr/local/
./usr/local/z55llpddk/
./usr/local/z55llpddk/utility/
./usr/local/z55llpddk/utility/lxakmcal.out
./usr/local/z55llpddk/utility/yelAS.lut
./usr/local/z55llpddk/utility/lxakalgn.out
./usr/local/z55llpddk/utility/lxakcln.out
./usr/local/z55llpddk/utility/yelUS.lut
./usr/local/z55llpddk/utility/lxakaual.out
./usr/local/z55llpddk/utility/yelEU.lut
user@user-desktop:~$ sudo tar xvzf lexmarkz55-CUPS-1.0.tgz -C /
./
./usr/
./usr/lib/
./usr/lib/cups/
./usr/lib/cups/filter/
./usr/lib/cups/filter/rastertoz55
./usr/lib/cups/backend/
./usr/lib/cups/backend/z55
./usr/share/
./usr/share/cups/
./usr/share/cups/model/
./usr/share/cups/model/Lexmark-Z55-lxz55cj-cups.ppd.gz
user@user-desktop:~$ sudo ldconfig
user@user-desktop:~$ cd /usr/share/cups/model
user@user-desktop:/usr/share/cups/model$


μετα τι κανω?

[ftso]

όπου και αν σταμάτησες συνέχισε με τα παρακάτω:

Κώδικας: Επιλογή όλων

cd /usr/share/cups/model

Κώδικας: Επιλογή όλων


sudo gunzip Lexmark-Z600-lxz600cj-cups.ppd.gz

Κώδικας: Επιλογή όλων

sudo /etc/rc2.d/S19cupsys restart

Κώδικας: Επιλογή όλων

/usr/lib/cups/backend/z55

και μετά με τα παρακάτω... (τα οποία δεν είναι εντολές αλλά οδηγίες!)

You should be something like:
direct z55:/dev/usblp0 "Lexmark Lexmark X6100 Series" "Lexmark Printer"

Adding the printer:
In GNOME goto System->Administration->Printing
Do Add Printer
Selected the Lexmark printer that should be recognized
Click Next and choose Install Driver
Go to /usr/share/cups/model/ and choose the .ppd file located there.
The new driver will now be added to the list (Z55 v1.0-1)
Click next and change the name of the printer to X6170 (or whatever suites your needs)
(NOTE: I had to add the printer twice on mine for some reason, the first time didnt seem to actually add the printer)
Once the printer is shown, right click and go to properties then do a test page.
Done.

[markip]

όπου και αν σταμάτησες συνέχισε με τα παρακάτω:

Κώδικας: Επιλογή όλων

cd /usr/share/cups/model

Κώδικας: Επιλογή όλων


sudo gunzip Lexmark-Z600-lxz600cj-cups.ppd.gz

οπως ειπα πριν μετα απο

Κώδικας: Επιλογή όλων

cd /usr/share/cups/model

μου βγαζει αυτο

Κώδικας: Επιλογή όλων

user@user-desktop:/usr/share/cups/model$



οταν προσπαθω να συνεχισω με αυτο

Κώδικας: Επιλογή όλων

sudo gunzip Lexmark-Z600-lxz600cj-cups.ppd.gz

μου βγαζει οτι

Κώδικας: Επιλογή όλων

user@user-desktop:~$ sudo gunzip Lexmark-Z600-lxz600cj-cups.ppd.gz
[sudo] password for user:
gzip: Lexmark-Z600-lxz600cj-cups.ppd.gz: No such file or directory


δεν μπορω να συνεχισω. Ποιο ειναι το προβλημα?

[markip]

παιδία σήμερα καταφερα να δουλεψει ο εκτυπωτης!!!!! Και αν αναρωτιεστε πως το εκανα, το εκανα παρα πολυ απλα! Πηγα στο Συστημα-->Διαχειριση Συστηματος--> Εκτυπωση και μετα εκει που λεει κατασκευη και μοντελο και αντι για Lexmark X6100 series επελεξα Lexmark Ζ55 και στη συνεχεια αφου κατεβασε τον οδηγο πατησα εκτυπωση δοκιμαστικης σελιδας και δουλεψε!!!!! Τελοςπαντων το προβλημα επιλυθηκε, ας προσθεσει καποιος moderator στον τιτλο του thread το ''ΕΠΙΛΥΘΗΚΕ''. Παντως ευχαριστω για την βοηθεια σας!