από georgebob » 15 Οκτ 2008, 02:30
- Κώδικας: Επιλογή όλων
/host/ubuntu/disks/root.disk on / type ext3 (rw,errors=remount-ro)
proc on /proc type proc (rw,noexec,nosuid,nodev)
/sys on /sys type sysfs (rw,noexec,nosuid,nodev)
varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755)
varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777)
udev on /dev type tmpfs (rw,mode=0755)
devshm on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
lrm on /lib/modules/2.6.24-19-generic/volatile type tmpfs (rw)
/host/ubuntu/disks/boot on /boot type none (rw,bind)
securityfs on /sys/kernel/security type securityfs (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/georgebob/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=georgebob)
- Κώδικας: Επιλογή όλων
[ 32.223017] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 32.223051] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 32.302941] Calibrating delay using timer specific routine.. 3728.02 BogoMIPS (lpj=7456052)
[ 32.302964] Security Framework initialized
[ 32.302971] SELinux: Disabled at boot.
[ 32.302984] AppArmor: AppArmor initialized
[ 32.302988] Failure registering capabilities with primary security module.
[ 32.302995] Mount-cache hash table entries: 512
[ 32.303107] Initializing cgroup subsys ns
[ 32.303111] Initializing cgroup subsys cpuacct
[ 32.303121] CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000 00000000
[ 32.303131] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 32.303133] CPU: L2 cache: 2048K
[ 32.303136] CPU: After all inits, caps: afe9fbff 00100000 00000000 00002040 00000180 00000000 00000000 00000000
[ 32.303145] Compat vDSO mapped to ffffe000.
[ 32.303155] Checking 'hlt' instruction... OK.
[ 32.319265] SMP alternatives: switching to UP code
[ 32.320964] Freeing SMP alternatives: 11k freed
[ 32.321060] Early unpacking initramfs... done
[ 32.672013] ACPI: Core revision 20070126
[ 32.672066] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 32.679089] CPU0: Intel(R) Pentium(R) M processor 1.86GHz stepping 08
[ 32.679113] Total of 1 processors activated (3728.02 BogoMIPS).
[ 32.679300] ENABLING IO-APIC IRQs
[ 32.679488] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 32.826124] Brought up 1 CPUs
[ 32.826150] CPU0 attaching sched-domain:
[ 32.826152] domain 0: span 01
[ 32.826154] groups: 01
[ 32.826302] net_namespace: 64 bytes
[ 32.826310] Booting paravirtualized kernel on bare hardware
[ 32.826734] Time: 21:01:19 Date: 10/14/08
[ 32.826756] NET: Registered protocol family 16
[ 32.826924] EISA bus registered
[ 32.826950] ACPI: bus type pci registered
[ 32.827408] PCI: PCI BIOS revision 2.10 entry at 0xfd924, last bus=6
[ 32.827411] PCI: Using configuration type 1
[ 32.827420] Setting up standard PCI resources
[ 32.835800] ACPI: EC: Look up EC in DSDT
[ 32.836966] ACPI: Interpreter enabled
[ 32.836969] ACPI: (supports S0 S3 S4 S5)
[ 32.836981] ACPI: Using IOAPIC for interrupt routing
[ 32.837398] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 32.840507] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 32.840510] ACPI: EC: driver started in interrupt mode
[ 32.840545] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 32.841103] Force enabled HPET at base address 0xfed00000
[ 32.841111] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 32.841115] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 32.842043] PCI: Transparent bridge - 0000:00:1e.0
[ 32.842181] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 32.842457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 32.842567] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 32.842674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 32.844332] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 32.844409] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 32.844484] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 32.844560] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 32.844634] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 32.844709] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 32.844783] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 32.844859] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 32.844965] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 32.844992] pnp: PnP ACPI init
[ 32.844998] ACPI: bus type pnp registered
[ 32.846953] pnp: PnP ACPI: found 12 devices
[ 32.846956] ACPI: ACPI bus type pnp unregistered
[ 32.846959] PnPBIOS: Disabled by ACPI PNP
[ 32.847147] PCI: Using ACPI for IRQ routing
[ 32.847150] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 32.870051] NET: Registered protocol family 8
[ 32.870053] NET: Registered protocol family 20
[ 32.870197] hpet clockevent registered
[ 32.870203] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 32.870207] hpet0: 3 64-bit timers, 14318180 Hz
[ 32.871238] AppArmor: AppArmor Filesystem Enabled
[ 32.874003] Time: tsc clocksource has been installed.
[ 32.882021] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 32.882024] system 00:01: iomem range 0xf0000000-0xf0003fff could not be reserved
[ 32.882027] system 00:01: iomem range 0xf0004000-0xf0004fff could not be reserved
[ 32.882030] system 00:01: iomem range 0xf0005000-0xf0005fff could not be reserved
[ 32.882033] system 00:01: iomem range 0xf0008000-0xf000bfff could not be reserved
[ 32.882035] system 00:01: iomem range 0xfed20000-0xfed8ffff could not be reserved
[ 32.882042] system 00:06: ioport range 0x680-0x6ff has been reserved
[ 32.882044] system 00:06: ioport range 0x800-0x80f has been reserved
[ 32.882047] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 32.882050] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 32.882052] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 32.912368] PCI: Bridge: 0000:00:01.0
[ 32.912371] IO window: 2000-2fff
[ 32.912374] MEM window: c0100000-c01fffff
[ 32.912377] PREFETCH window: d0000000-d7ffffff
[ 32.912380] PCI: Bridge: 0000:00:1c.0
[ 32.912383] IO window: 3000-3fff
[ 32.912388] MEM window: c4000000-c7ffffff
[ 32.912392] PREFETCH window: d8000000-dbffffff
[ 32.912411] PCI: Bus 7, cardbus bridge: 0000:06:04.0
[ 32.912412] IO window: 00004400-000044ff
[ 32.912418] IO window: 00004800-000048ff
[ 32.912424] PREFETCH window: 50000000-53ffffff
[ 32.912429] MEM window: 54000000-57ffffff
[ 32.912435] PCI: Bus 11, cardbus bridge: 0000:06:04.1
[ 32.912437] IO window: 00004c00-00004cff
[ 32.912442] IO window: 00001400-000014ff
[ 32.912447] PREFETCH window: 58000000-5bffffff
[ 32.912452] MEM window: 5c000000-5fffffff
[ 32.912458] PCI: Bridge: 0000:00:1e.0
[ 32.912460] IO window: 4000-4fff
[ 32.912465] MEM window: c8000000-c80fffff
[ 32.912469] PREFETCH window: disabled.
[ 32.912485] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 32.912490] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 32.912510] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 32.912516] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 32.912528] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 32.912545] PCI: Enabling device 0000:06:04.0 (0000 -> 0003)
[ 32.912549] ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 22 (level, low) -> IRQ 18
[ 32.912572] PCI: Enabling device 0000:06:04.1 (0000 -> 0003)
[ 32.912577] ACPI: PCI Interrupt 0000:06:04.1[B] -> GSI 21 (level, low) -> IRQ 19
[ 32.912586] PCI: Setting latency timer of device 0000:06:04.1 to 64
[ 32.912596] NET: Registered protocol family 2
[ 32.949930] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 32.950136] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 32.950880] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 32.951349] TCP: Hash tables configured (established 131072 bind 65536)
[ 32.951353] TCP reno registered
[ 32.962007] checking if image is initramfs... it is
[ 33.373167] Switched to high resolution mode on CPU 0
[ 33.639024] Freeing initrd memory: 7559k freed
[ 33.639283] Simple Boot Flag at 0x37 set to 0x1
[ 33.639661] audit: initializing netlink socket (disabled)
[ 33.639677] audit(1224018079.308:1): initialized
[ 33.639841] highmem bounce pool size: 64 pages
[ 33.641569] VFS: Disk quotas dquot_6.5.1
[ 33.641639] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 33.641772] io scheduler noop registered
[ 33.641774] io scheduler anticipatory registered
[ 33.641776] io scheduler deadline registered
[ 33.641787] io scheduler cfq registered (default)
[ 33.641968] Boot video device is 0000:01:00.0
[ 33.642071] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 33.642099] assign_interrupt_mode Found MSI capability
[ 33.642125] Allocate Port Service[0000:00:01.0:pcie00]
[ 33.642194] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 33.642246] assign_interrupt_mode Found MSI capability
[ 33.642286] Allocate Port Service[0000:00:1c.0:pcie00]
[ 33.642324] Allocate Port Service[0000:00:1c.0:pcie02]
[ 33.642552] isapnp: Scanning for PnP cards...
[ 33.996701] isapnp: No Plug & Play device found
[ 34.020977] Real Time Clock Driver v1.12ac
[ 34.021185] hpet_resources: 0xfed00000 is busy
[ 34.021213] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 34.022327] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 34.022391] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 34.022478] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 34.024834] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 34.026086] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 34.026090] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 34.026092] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 34.026094] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 34.026097] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 34.028175] mice: PS/2 mouse device common for all mice
[ 34.028275] EISA: Probing bus 0 at eisa.0
[ 34.028282] Cannot allocate resource for EISA slot 1
[ 34.028285] Cannot allocate resource for EISA slot 2
[ 34.028287] Cannot allocate resource for EISA slot 3
[ 34.028289] Cannot allocate resource for EISA slot 4
[ 34.028306] EISA: Detected 0 cards.
[ 34.028309] cpuidle: using governor ladder
[ 34.028311] cpuidle: using governor menu
[ 34.028398] NET: Registered protocol family 1
[ 34.028422] Using IPI No-Shortcut mode
[ 34.028454] registered taskstats version 1
[ 34.028561] Magic number: 12:266:45
[ 34.028565] hash matches device ttyee
[ 34.028650] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 34.028652] EDD information not available.
[ 34.028832] Freeing unused kernel memory: 368k freed
[ 34.055976] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 35.211290] fuse init (API version 7.9)
[ 35.230714] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 35.230719] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 35.230731] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 35.232583] ACPI: Invalid passive threshold
[ 35.233440] ACPI: Thermal Zone [THM0] (45 C)
[ 35.821152] usbcore: registered new interface driver usbfs
[ 35.821175] usbcore: registered new interface driver hub
[ 35.832926] usbcore: registered new device driver usb
[ 35.842412] USB Universal Host Controller Interface driver v3.0
[ 35.842472] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 35.842482] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 35.842487] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 35.842817] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 35.842849] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 35.842973] usb usb1: configuration #1 chosen from 1 choice
[ 35.842997] hub 1-0:1.0: USB hub found
[ 35.843002] hub 1-0:1.0: 2 ports detected
[ 35.944822] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
[ 35.944835] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 35.944839] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 35.944861] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 35.944892] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001820
[ 35.944998] usb usb2: configuration #1 chosen from 1 choice
[ 35.945019] hub 2-0:1.0: USB hub found
[ 35.945024] hub 2-0:1.0: 2 ports detected
[ 35.954764] SCSI subsystem initialized
[ 36.000740] libata version 3.00 loaded.
[ 36.048639] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22
[ 36.048652] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 36.048656] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 36.048679] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 36.048711] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00001840
[ 36.048810] usb usb3: configuration #1 chosen from 1 choice
[ 36.048831] hub 3-0:1.0: USB hub found
[ 36.048837] hub 3-0:1.0: 2 ports detected
[ 36.152541] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 36.152556] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 36.152560] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 36.152581] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 36.156480] ehci_hcd 0000:00:1d.7: debug port 1
[ 36.156486] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 36.156493] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xc0004000
[ 36.172331] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 36.172447] usb usb4: configuration #1 chosen from 1 choice
[ 36.172469] hub 4-0:1.0: USB hub found
[ 36.172475] hub 4-0:1.0: 6 ports detected
[ 36.276323] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 21 (level, low) -> IRQ 19
[ 36.329406] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[c8004000-c80047ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 36.329599] ahci 0000:00:1f.2: version 3.0
[ 36.329624] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
[ 36.329645] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
[ 36.691469] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 36.823783] usb 4-2: configuration #1 chosen from 1 choice
[ 36.863137] Clocksource tsc unstable (delta = -16495304733 ns)
[ 36.869811] Time: hpet clocksource has been installed.
[ 36.889261] usbcore: registered new interface driver libusual
[ 36.893286] Initializing USB Mass Storage driver...
[ 36.894037] scsi0 : SCSI emulation for USB Mass Storage devices
[ 36.894416] usbcore: registered new interface driver usb-storage
[ 36.894419] USB Mass Storage support registered.
[ 36.894473] usb-storage: device found at 2
[ 36.894475] usb-storage: waiting for device to settle before scanning
[ 36.903377] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 4 ports 1.5 Gbps 0xf impl IDE mode
[ 36.903382] ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
[ 36.903387] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 36.903605] scsi1 : ahci
[ 36.903771] scsi2 : ahci
[ 36.903884] scsi3 : ahci
[ 36.903996] scsi4 : ahci
[ 36.904073] ata1: SATA max UDMA/133 abar m1024@0xc0004400 port 0xc0004500 irq 21
[ 36.904077] ata2: SATA max UDMA/133 abar m1024@0xc0004400 port 0xc0004580 irq 21
[ 36.904080] ata3: SATA max UDMA/133 abar m1024@0xc0004400 port 0xc0004600 irq 21
[ 36.904083] ata4: SATA max UDMA/133 abar m1024@0xc0004400 port 0xc0004680 irq 21
[ 36.906629] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 36.911950] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0090f50000469c88]
[ 36.913631] usb 2-2: configuration #1 chosen from 1 choice
[ 36.929808] usbcore: registered new interface driver hiddev
[ 36.932642] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/input/input2
[ 36.932954] ata1: SATA link down (SStatus 0 SControl 300)
[ 36.933021] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2
[ 36.933033] usbcore: registered new interface driver usbhid
[ 36.933036] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 36.951708] ata2: SATA link down (SStatus 0 SControl 0)
[ 36.959073] ata3: SATA link down (SStatus 0 SControl 300)
[ 36.966380] ata4: SATA link down (SStatus 0 SControl 0)
[ 36.967067] ata_piix 0000:00:1f.1: version 2.12
[ 36.967085] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 22
[ 36.967118] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 36.967179] scsi5 : ata_piix
[ 36.967327] scsi6 : ata_piix
[ 36.967821] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 36.967824] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 36.976714] ata5.00: ATA-6: TOSHIBA MK8032GAX, AD001A, max UDMA/100
[ 36.976717] ata5.00: 156301488 sectors, multi 16: LBA48
[ 36.976740] ata5.01: ATAPI: MATSHITAUJ-840D, 1.00, max UDMA/33
[ 36.977615] ata5.00: configured for UDMA/100
[ 36.982243] ata5.01: configured for UDMA/33
[ 36.982277] ata6: port disabled. ignoring.
[ 36.982394] scsi 5:0:0:0: Direct-Access ATA TOSHIBA MK8032GA AD00 PQ: 0 ANSI: 5
[ 36.983430] scsi 5:0:1:0: CD-ROM MATSHITA UJ-840D 1.00 PQ: 0 ANSI: 5
[ 36.999784] Driver 'sd' needs updating - please use bus_type methods
[ 36.999855] sd 5:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 36.999866] sd 5:0:0:0: [sda] Write Protect is off
[ 36.999868] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.999882] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.999925] sd 5:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 36.999933] sd 5:0:0:0: [sda] Write Protect is off
[ 36.999936] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 36.999950] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 36.999953] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 37.014872] sda1
[ 37.014923] sd 5:0:0:0: [sda] Attached SCSI disk
[ 37.019805] sd 5:0:0:0: Attached scsi generic sg0 type 0
[ 37.019821] sr 5:0:1:0: Attached scsi generic sg1 type 5
[ 37.025474] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 37.025478] Uniform CD-ROM driver Revision: 3.20
[ 37.025517] sr 5:0:1:0: Attached scsi CD-ROM sr0
[ 37.230986] loop: module loaded
[ 37.246664] kjournald starting. Commit interval 5 seconds
[ 37.246674] EXT3-fs: mounted filesystem with ordered data mode.
[ 37.448066] usb-storage: device scan complete
[ 37.448373] scsi 0:0:0:0: Direct-Access WD 5000AAV External 1.65 PQ: 0 ANSI: 4
[ 37.449048] sd 0:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 37.449575] sd 0:0:0:0: [sdb] Write Protect is off
[ 37.449577] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 37.449580] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 37.450025] sd 0:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[ 37.450422] sd 0:0:0:0: [sdb] Write Protect is off
[ 37.450424] sd 0:0:0:0: [sdb] Mode Sense: 21 00 00 00
[ 37.450426] sd 0:0:0:0: [sdb] Assuming drive cache: write through
[ 37.450429] sdb: sdb1
[ 39.853279] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 39.853338] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 42.225395] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.282088] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.345166] Linux agpgart interface v0.102
[ 42.621655] iTCO_vendor_support: vendor-support=0
[ 42.660602] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 42.660713] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 42.660756] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 42.725458] input: Power Button (FF) as /devices/virtual/input/input3
[ 42.740445] ACPI: Power Button (FF) [PWRF]
[ 42.740512] input: Power Button (CM) as /devices/virtual/input/input4
[ 42.756414] ACPI: Power Button (CM) [PWRB]
[ 42.756492] input: Lid Switch as /devices/virtual/input/input5
[ 42.756678] ACPI: Lid Switch [LID0]
[ 42.756744] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 42.772390] ACPI: Sleep Button (CM) [SLPB]
[ 42.830181] ACPI: AC Adapter [ADP0] (on-line)
[ 42.892184] intel_rng: FWH not detected
[ 43.002673] ACPI: Battery Slot [BAT0] (battery present)
[ 43.464305] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 43.464320] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 43.464353] sky2 0000:02:00.0: v1.20 addr 0xc4000000 irq 16 Yukon-EC (0xb6) rev 1
[ 43.464761] sky2 eth0: addr 00:90:f5:46:9c:88
[ 43.718721] ieee80211_crypt: registered algorithm 'NULL'
[ 43.763751] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 43.763756] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 43.898624] Yenta: CardBus bridge found at 0000:06:04.0 [1558:04a0]
[ 43.898650] Yenta: Enabling burst memory read transactions
[ 43.898657] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 43.898659] Yenta: Routing CardBus interrupts to PCI
[ 43.898664] Yenta TI: socket 0000:06:04.0, mfunc 0x00000022, devctl 0x64
[ 43.904609] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 44.130782] Yenta: ISA IRQ mask 0x0000, PCI irq 18
[ 44.130788] Socket status: 30000086
[ 44.130791] Yenta: Raising subordinate bus# of parent bus (#06) from #06 to #0a
[ 44.130796] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 44.130799] cs: IO port probe 0x4000-0x4fff: clean.
[ 44.131024] pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
[ 44.137986] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[ 44.138022] [fglrx] ASYNCIO init succeed!
[ 44.138476] [fglrx] PAT is enabled successfully!
[ 44.139037] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
[ 44.182137] Yenta: CardBus bridge found at 0000:06:04.1 [1558:04a0]
[ 44.182165] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 44.182167] Yenta: Routing CardBus interrupts to PCI
[ 44.182173] Yenta TI: socket 0000:06:04.1, mfunc 0x00000022, devctl 0x64
[ 44.215139] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 44.215143] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 44.337694] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 44.414284] Yenta: ISA IRQ mask 0x0000, PCI irq 19
[ 44.414289] Socket status: 30000006
[ 44.414292] Yenta: Raising subordinate bus# of parent bus (#06) from #0a to #0e
[ 44.414297] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 44.414300] cs: IO port probe 0x4000-0x4fff: clean.
[ 44.414525] pcmcia: parent PCI bridge Memory window: 0xc8000000 - 0xc80fffff
[ 44.481699] ACPI: PCI Interrupt 0000:06:03.0[A] -> GSI 20 (level, low) -> IRQ 23
[ 44.529509] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 44.545235] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 44.573328] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 45.006057] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 23
[ 45.006084] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 45.037989] hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
[ 46.684459] irda_init()
[ 46.684477] NET: Registered protocol family 23
[ 46.781290] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio4/input/input9
[ 46.804193] parport_pc 00:09: reported by Plug and Play ACPI
[ 46.804329] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 46.901289] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 0.
[ 46.901316] nsc-ircc, chip->init
[ 46.901329] nsc-ircc, Found chip at base=0x02e
[ 46.901333] nsc-ircc, Wrong chip version ff
[ 46.901372] nsc-ircc, Found chip at base=0x02e
[ 46.901377] nsc-ircc, Wrong chip version ff
[ 46.901390] nsc-ircc, chip->init
[ 46.901402] nsc-ircc, Found chip at base=0x02e
[ 46.901406] nsc-ircc, Wrong chip version ff
[ 46.901444] nsc-ircc, Found chip at base=0x02e
[ 46.901448] nsc-ircc, Wrong chip version ff
[ 46.901545] nsc-ircc 00:08: disabled
[ 48.001213] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 48.031270] cs: IO port probe 0x100-0x3af: clean.
[ 48.033092] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 48.033859] cs: IO port probe 0x820-0x8ff: clean.
[ 48.034484] cs: IO port probe 0xc00-0xcf7: clean.
[ 48.035264] cs: IO port probe 0xa00-0xaff: clean.
[ 48.036124] cs: IO port probe 0x100-0x3af: clean.
[ 48.037942] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 48.038711] cs: IO port probe 0x820-0x8ff: clean.
[ 48.039347] cs: IO port probe 0xc00-0xcf7: clean.
[ 48.040136] cs: IO port probe 0xa00-0xaff: clean.
[ 48.116603] lp0: using parport0 (interrupt-driven).
[ 48.219803] EXT3 FS on loop0, internal journal
[ 57.590619] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 57.846587] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 58.104746] No dock devices found.
[ 58.755057] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 58.755062] apm: overridden by ACPI.
[ 58.932895] ppdev: user-space parallel port driver
[ 58.962304] audit(1224007335.125:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5239 profile="/usr/sbin/cupsd" namespace="default"
[ 137.946964] Marking TSC unstable due to: cpufreq changes.
[ 139.323509] sky2 eth0: enabling interface
[ 60.127972] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 60.830789] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 63.084138] NET: Registered protocol family 17
[ 63.966841] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 63.966848] ata5.00: BMDMA stat 0x64
[ 63.966854] ata5.00: cmd c8/00:08:27:52:6d/00:00:00:00:00/e5 tag 0 dma 4096 in
[ 63.966856] res 51/84:01:3e:52:6d/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[ 63.966859] ata5.00: status: { DRDY ERR }
[ 63.966861] ata5.00: error: { ICRC ABRT }
[ 63.966896] ata5: soft resetting link
[ 64.310652] ata5.00: configured for UDMA/100
[ 64.482116] ata5.01: configured for UDMA/33
[ 64.482124] ata5: EH complete
[ 64.718365] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 64.718369] ata5.00: BMDMA stat 0x64
[ 64.718374] ata5.00: cmd c8/00:08:27:52:6d/00:00:00:00:00/e5 tag 0 dma 4096 in
[ 64.718376] res 51/84:01:32:52:6d/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[ 64.718379] ata5.00: status: { DRDY ERR }
[ 64.718381] ata5.00: error: { ICRC ABRT }
[ 64.718411] ata5: soft resetting link
[ 65.061179] ata5.00: configured for UDMA/100
[ 65.232784] ata5.01: configured for UDMA/33
[ 65.232792] ata5: EH complete
[ 65.469907] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 65.469910] ata5.00: BMDMA stat 0x64
[ 65.469916] ata5.00: cmd c8/00:08:27:52:6d/00:00:00:00:00/e5 tag 0 dma 4096 in
[ 65.469917] res 51/84:01:32:52:6d/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[ 65.469920] ata5.00: status: { DRDY ERR }
[ 65.469922] ata5.00: error: { ICRC ABRT }
[ 65.469953] ata5: soft resetting link
[ 65.811813] ata5.00: configured for UDMA/100
[ 65.983445] ata5.01: configured for UDMA/33
[ 65.983451] ata5: EH complete
[ 66.221441] ata5.00: limiting speed to UDMA/66:PIO4
[ 66.221445] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
[ 66.221447] ata5.00: BMDMA stat 0x64
[ 66.221452] ata5.00: cmd c8/00:08:27:52:6d/00:00:00:00:00/e5 tag 0 dma 4096 in
[ 66.221453] res 51/84:01:32:52:6d/00:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[ 66.221456] ata5.00: status: { DRDY ERR }
[ 66.221458] ata5.00: error: { ICRC ABRT }
[ 66.221488] ata5: soft resetting link
[ 155.020794] ata5.00: configured for UDMA/66
[ 155.026723] ata5.01: configured for UDMA/33
[ 155.026736] ata5: EH complete
[ 155.028173] sd 5:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 155.028544] sd 5:0:0:0: [sda] Write Protect is off
[ 155.028551] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 155.028595] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 155.028634] sd 5:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 155.028655] sd 5:0:0:0: [sda] Write Protect is off
[ 155.028660] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 155.028692] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 155.105917] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 155.105929] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X40000
[ 155.105935] [fglrx] Reserve Block - 2 offset = 0Xffff000 length = 0X1000
[ 155.105941] [fglrx] Reserve Block - 3 offset = 0X7fbb000 length = 0X40000
[ 77.780111] [fglrx] interrupt source 20008000 successfully enabled
[ 77.780118] [fglrx] enable ID = 0x00000004
[ 77.780468] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 77.780674] [fglrx] interrupt source 10000000 successfully enabled
[ 77.780678] [fglrx] enable ID = 0x00000005
[ 77.780911] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 156.198027] NET: Registered protocol family 10
[ 156.198804] lo: Disabled Privacy Extensions
[ 156.200302] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 161.383993] eth0: no IPv6 routers present
[ 98.043968] totem[6398]: segfault at 00000005 eip b6f57de0 esp a6780e88 error 4
[ 186.025525] [fglrx] interrupt source 10000000 successfully disabled!
[ 186.025531] [fglrx] enable ID = 0x00000000
[ 186.025534] [fglrx] Receive disable interrupt message with irqEnableMask: 10000000; dwIRQEnableId: 00000005
[ 186.025545] [fglrx] interrupt source 20008000 successfully disabled!
[ 186.025547] [fglrx] enable ID = 0x00000000
[ 186.025550] [fglrx] Receive disable interrupt message with irqEnableMask: 20008000; dwIRQEnableId: 00000004
[ 192.484618] [fglrx] PCIe has already been initialized. Reinitializing ...
[ 192.502720] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000
[ 192.502725] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X40000
[ 192.502728] [fglrx] Reserve Block - 2 offset = 0Xffff000 length = 0X1000
[ 192.502730] [fglrx] Reserve Block - 3 offset = 0X7fbb000 length = 0X40000
[ 192.677322] [fglrx] interrupt source 20008000 successfully enabled
[ 192.677330] [fglrx] enable ID = 0x00000004
[ 192.677665] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[ 192.677864] [fglrx] interrupt source 10000000 successfully enabled
[ 192.677867] [fglrx] enable ID = 0x00000005
[ 192.678061] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
[ 4160.258369] usb 4-2: USB disconnect, address 2
2 Ubuntu 13.04 raring 3.8.0-29-generic 32bit (el_GR.UTF-8, Unity ubuntu), Ubuntu 3.5.0-39-generic, Windows 8
3 AMD E2-2000 APU with Radeon HD Graphics ‖ RAM 3606 MiB ‖ SAMSUNG ELECTRONICS CO., LTD. NP275E5E-K01GR - SAMSUNG ELECTRONICS CO., LTD. 275E4E/275E5E
4 AMD nee ATI Wrestler [Radeon HD 7340] [1002:9808] {radeon}
5 wlan0: Atheros Inc. AR9485 Wireless Network Adapter [168c:0032] (rev 01) ⋮ eth0: Realtek RTL8101E/RTL8102E Ethernet [10ec:8136] (rev 05)
