εξωτερικος σκληρος προβλημα

[fkol k4]

Τώρα με έστειλες αδιάβαστο!!
Τα windows που μπορούν να τον διαβάσουν που είναι;
Το Linux αυτή τη στιγμή τρέχει από εγκατάσταση στον εσωτερικό σκληρό δίσκο ή από Live CD;
Επίσης, θα ήθελα να επεξεργαστείς το αποτέλεσμα της εντολής και να το βάλεις μέσα σε

Κώδικας: Επιλογή όλων

[code][/code]

Αυτό το κάνεις επιλέγοντας το κείμενο και πατώντας το κουμπάκι .

[rallos200]

τα win τα εχω στον επιτραπεζιο ..το κουμπακι αυτο δεν το βλεπω πουθενα οσο για την 3 ερωτηση απλα δεν ξερω τι λες γτ ειμαι ασχετος

[fkol k4]

Το κουμπάκι είναι εδώ που γράφεις τα μηνύματα στο forum και έχει κάτι τετράγωνα κουμπάκια πάνω από το πλαίσιο που γράφουμε το κείμενο, αριστερά από εκεί που γράφει
«Γραμματοσειρά», «Videos», «Άδειες χρήσης» και «άλλα BBCodes».
Είναι σημαντικό να βάζουμε εντολές και αποτελέσματά τους σε πλαίσιο κώδικα, γιατί:
1. Αυτό χρησιμοποιεί άλλου είδους γραμματοσειρά (σταθερού πλάτους) και λευκό φόντο ώστε να είναι ευανάγνωστο
2. Σε περίπτωση που έχουμε ένα μεγάλο κείμενο, δεν πιάνει όλη τη σελίδα του thread.

για την 3 ερωτηση απλα δεν ξερω τι λες γτ ειμαι ασχετος

Για την ερώτηση, ρωτάω απλά αν στον υπολογιστή από τον οποίο βγήκε αυτό το αποτέλεσμα εντολής, το Ubuntu είναι κανονικά εγκαταστημένο στο σκληρό δίσκο.
Αν ναι, με συνδεδεμένο τον εξωτερικό (βγάλτον, περίμενε 10 δευτερόλεπτα, ξαναβάλτον, περίμενε άλλα 10) δώσε τις εντολές (μία μία)

Κώδικας: Επιλογή όλων


mount
lsusb


και δημοσίευσε το αποτέλεσμά τους.
Επίσης, αν το δίσκο τον έχεις συνδέσει μέσω USB HUB, βγάλε το και σύνδεσέ τον κατευθείαν στην θύρα USB (πριν δώσεις τις εντολές).

[rallos200]

Κώδικας: Επιλογή όλων

rallos200@rallos200-U-100:~$ sudo fdisk -l
[sudo] password for rallos200:
Sorry, try again.
[sudo] password for rallos200:

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0003162c

Device Boot Start End Blocks Id System
/dev/sda1 * 1 19446 156194816 83 Linux
/dev/sda2 19446 19458 93185 5 Extended
/dev/sda5 19446 19458 93184 82 Linux swap / Solaris
rallos200@rallos200-U-100:~$


αυτο εννοεις?

Κώδικας: Επιλογή όλων

rallos200@rallos200-U-100:~$ mount
/dev/sda1 on / type ext4 (rw,errors=remount-ro,commit=0)
proc on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
fusectl on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev type devtmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/rallos200/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=rallos200)
rallos200@rallos200-U-100:~$ lsusb
Bus 005 Device 002: ID 0db0:a97a Micro Star International Bluetooth EDR Device
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 014: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
Bus 001 Device 003: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
rallos200@rallos200-U-100:~$


[fkol k4]

Η συσκευή σου (η θήκη του σκληρού δίσκου δηλαδή) είναι αυτή:
152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
Αν κάνεις μία αναζήτηση με το hardware ID της, το 152d:2338 θα δεις ένα σωρό αναφορές για προβλήματα ακριβώς ίδια με το δικό σου, οπότε υποθέτω πως μάλλον αυτή η θήκη παρουσιάζει μεγάλο πρόβλημα όσον αφορά τη λειτουργία της σε Linux
Σχετικές αναζητήσεις.
Η μόνη λύση που είδα να προτείνει κάποιος και να λειτουργεί (αλλά και πάλι όχι σε όλους), είναι να βάζεις τη θήκη στην πρίζα πριν να τη συνδέσεις στον υπολογιστή, κατά τα άλλα από ότι είδα αν δε δουλέψει κι αυτό, θα πρέπει να δώσεις την εντολή dmesg, να δεις το μήνυμα που αναφέρεται στη συσκευή και από εκεί να προσπαθήσεις να την προσαρτήσεις.

[rallos200]

Κώδικας: Επιλογή όλων

[ 2593.148986] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2440.198 msecs
[ 2593.149027] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1833.194 msecs
[ 2593.149465] PM: resume of devices complete after 2446.820 msecs
[ 2593.150169] PM: resume devices took 2.448 seconds
[ 2593.150274] PM: Finishing wakeup.
[ 2593.150278] Restarting tasks ... done.
[ 2593.920574] video LNXVIDEO:00: Restoring backlight state
[ 2593.949382] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 2593.949395] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 2593.953416] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 2593.953429] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 2593.963690] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 2593.976239] composite sync not supported
[ 2594.442659] r8169 0000:01:00.0: eth0: link down
[ 2594.444317] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2594.488351] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[ 2594.514253] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2594.544514] pciehp 0000:00:1c.1:pcie04: Card present on Slot(0-1)
[ 2594.648093] pciehp 0000:00:1c.1:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
[ 2594.648110] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:02:00
[ 2599.028560] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 2600.383795] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 2602.545029] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 2602.545044] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 2602.548926] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 2602.548943] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 2602.624660] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 2602.624673] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 2602.628389] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 2602.628402] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 2602.673993] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 2602.674006] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 2602.677601] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 2602.677615] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 2602.743674] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 2602.743684] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2602.747483] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 2602.747500] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2602.813557] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 2602.813582] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2602.817157] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 2602.817182] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2602.872536] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 2602.872546] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2602.876451] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 2602.876469] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2602.953157] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 2602.953170] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2602.956768] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 2602.956781] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 2609.367844] wlan0: authenticate with 00:05:59:32:5a:bd (try 1)
[ 2609.369371] wlan0: authenticated
[ 2609.369507] wlan0: associate with 00:05:59:32:5a:bd (try 1)
[ 2609.389782] wlan0: RX AssocResp from 00:05:59:32:5a:bd (capab=0x431 status=0 aid=1)
[ 2609.389794] wlan0: associated
[ 2609.391700] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 2619.648074] wlan0: no IPv6 routers present
[ 2673.972194] usb 1-3: new high speed USB device using ehci_hcd and address 9
[ 2674.119320] scsi8 : usb-storage 1-3:1.0
[ 2675.117580] scsi 8:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[ 2675.131859] sd 8:0:0:0: Attached scsi generic sg1 type 0
[ 2675.134709] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2675.134736] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2675.139918] sd 8:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 2675.139932] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 2675.139946] sd 8:0:0:0: [sdb] Attached SCSI disk
[ 3235.536991] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3235.539196] SGI XFS Quota Management subsystem
[ 3235.573388] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3235.695440] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 3235.756239] QNX4 filesystem 0.2.3 registered.
[ 3235.879396] Btrfs loaded
[ 3403.481234] usb 1-3: USB disconnect, address 9
[ 3465.528218] usb 1-2: new high speed USB device using ehci_hcd and address 10
[ 3465.664578] scsi9 : usb-storage 1-2:1.0
[ 3466.665599] scsi 9:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[ 3466.674816] sd 9:0:0:0: Attached scsi generic sg1 type 0
[ 3466.679465] sd 9:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3466.679491] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 3466.685172] sd 9:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3466.685185] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[ 3466.685197] sd 9:0:0:0: [sdb] Attached SCSI disk
[ 3468.376244] usb 1-2: USB disconnect, address 10
[ 3508.052264] usb 1-2: new high speed USB device using ehci_hcd and address 11
[ 3508.188644] scsi10 : usb-storage 1-2:1.0
[ 3509.189585] scsi 10:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[ 3509.194153] sd 10:0:0:0: Attached scsi generic sg1 type 0
[ 3509.208681] sd 10:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3509.208694] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 3509.212683] sd 10:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3509.212696] sd 10:0:0:0: [sdb] Assuming drive cache: write through
[ 3509.212709] sd 10:0:0:0: [sdb] Attached SCSI disk
[ 3526.321633] usb 1-2: USB disconnect, address 11
[ 3584.352192] usb 1-2: new high speed USB device using ehci_hcd and address 12
[ 3584.502467] scsi11 : usb-storage 1-2:1.0
[ 3585.509599] scsi 11:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[ 3585.513477] sd 11:0:0:0: Attached scsi generic sg1 type 0
[ 3585.522697] sd 11:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3585.522711] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 3585.526559] sd 11:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3585.526572] sd 11:0:0:0: [sdb] Assuming drive cache: write through
[ 3585.526587] sd 11:0:0:0: [sdb] Attached SCSI disk
[ 3617.115046] usb 1-2: USB disconnect, address 12
[ 3732.964160] usb 1-2: new high speed USB device using ehci_hcd and address 13
[ 3733.100747] scsi12 : usb-storage 1-2:1.0
[ 3734.101632] scsi 12:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[ 3734.105323] sd 12:0:0:0: Attached scsi generic sg1 type 0
[ 3734.110768] sd 12:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3734.110790] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 3734.115269] sd 12:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 3734.115293] sd 12:0:0:0: [sdb] Assuming drive cache: write through
[ 3734.115317] sd 12:0:0:0: [sdb] Attached SCSI disk
[ 3833.901294] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 3833.901316] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 3833.905224] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 3833.905241] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 7140.314323] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 7140.314336] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 7140.318052] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 7140.318066] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 7140.345722] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 7140.345741] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 7140.349426] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 7140.349450] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 9493.879767] atkbd serio0: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[ 9493.879792] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 9493.883369] atkbd serio0: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[ 9493.883393] atkbd serio0: Use 'setkeycodes e078 <keycode>' to make it known.
[ 9566.239526] wlan0: deauthenticating from 00:05:59:32:5a:bd by local choice (reason=3)
[ 9566.268582] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 9566.268607] cfg80211: Restoring regulatory settings
[ 9566.268639] cfg80211: Calling CRDA to update world regulatory domain
[ 9566.293430] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293445] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293454] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293465] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293474] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293485] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293493] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293503] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293511] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293521] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293529] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293538] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293547] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293557] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293565] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293576] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293585] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293595] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293604] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293614] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293623] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293633] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293641] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293651] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293659] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293670] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293678] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 9566.293687] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 9566.293696] cfg80211: World regulatory domain updated:
[ 9566.293702] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9566.293711] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9566.293720] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9566.293728] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 9566.293737] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9566.293745] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 9567.973159] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 9569.905266] PM: Syncing filesystems ... done.
[ 9569.922883] PM: Preparing system for mem sleep
[ 9570.252095] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9570.268271] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9570.284308] PM: Entering mem sleep
[ 9570.284384] Suspending console(s) (use no_console_suspend to debug)
[ 9570.285886] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9570.286229] sd 0:0:0:0: [sda] Stopping disk
[ 9570.592890] PM: suspend of drv:sd dev:0:0:0:0 complete after 307.003 msecs
[ 9570.592943] PM: suspend of drv:scsi dev:target0:0:0 complete after 306.943 msecs
[ 9570.780417] PM: suspend of drv:psmouse dev:serio1 complete after 495.097 msecs
[ 9570.786547] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 9570.786572] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 9570.786784] ata_piix 0000:00:1f.2: PCI INT B disabled
[ 9570.786881] uhci_hcd 0000:00:1d.1: PCI INT B disabled
[ 9570.786889] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 9570.786920] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
[ 9570.786966] rt2800pci 0000:02:00.0: PCI INT A disabled
[ 9570.786978] ACPI handle has no context!
[ 9570.787595] i915 0000:00:02.0: PCI INT A disabled
[ 9570.800174] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 9570.800347] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
[ 9570.888186] HDA Intel 0000:00:1b.0: PCI INT A disabled
[ 9570.888244] ACPI handle has no context!
[ 9570.904127] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 117.185 msecs
[ 9570.904198] PM: suspend of drv: dev:pci0000:00 complete after 116.428 msecs
[ 9570.904255] PM: suspend of devices complete after 619.524 msecs
[ 9570.904267] PM: suspend devices took 0.620 seconds
[ 9570.904927] r8169 0000:01:00.0: PME# enabled
[ 9570.904954] pcieport 0000:00:1c.0: wake-up capability enabled by ACPI
[ 9570.936515] PM: late suspend of devices complete after 32.235 msecs
[ 9570.936573] ACPI: Preparing to enter system sleep state S3
[ 9570.936900] PM: Saving platform NVS memory
[ 9570.937934] Disabling non-boot CPUs ...
[ 9571.040161] CPU 1 is now offline
[ 9571.040991] Extended CMOS year: 2000
[ 9571.040991] Back to C!
[ 9571.040991] PM: Restoring platform NVS memory
[ 9571.040991] Extended CMOS year: 2000
[ 9571.040991] Enabling non-boot CPUs ...
[ 9571.040991] Booting Node 0 Processor 1 APIC 0x1
[ 9570.939518] Initializing CPU#1
[ 9570.939518] Atom PSE erratum detected, BIOS microcode update recommended
[ 9571.136066] Switched to NOHz mode on CPU #1
[ 9571.136282] CPU1 is up
[ 9571.136929] ACPI: Waking up from system sleep state S3
[ 9571.137307] i915 0000:00:02.0: restoring config space at offset 0x7 (was 0x0, writing 0xdff00000)
[ 9571.137341] pci 0000:00:02.1: restoring config space at offset 0x4 (was 0x0, writing 0xdfe00000)
[ 9571.137351] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
[ 9571.137378] HDA Intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 9571.137399] HDA Intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x88000004, writing 0xffe00004)
[ 9571.137408] HDA Intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 9571.137418] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100002)
[ 9571.137452] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 9571.137467] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0xffd1ffd1)
[ 9571.137476] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xdfd0dfd0)
[ 9571.137485] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x0, writing 0xd0d0)
[ 9571.137497] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 9571.137507] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 9571.137545] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20a)
[ 9571.137559] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x80118001)
[ 9571.137568] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xdfc0dfc0)
[ 9571.137577] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x2020)
[ 9571.137589] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 9571.137599] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 9571.137630] uhci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 9571.137655] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 9571.137675] uhci_hcd 0000:00:1d.1: restoring config space at offset 0xf (was 0x200, writing 0x203)
[ 9571.137700] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 9571.137719] uhci_hcd 0000:00:1d.2: restoring config space at offset 0xf (was 0x300, writing 0x307)
[ 9571.137744] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 9571.137763] uhci_hcd 0000:00:1d.3: restoring config space at offset 0xf (was 0x400, writing 0x40b)
[ 9571.137788] uhci_hcd 0000:00:1d.3: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
[ 9571.137814] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 9571.137841] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900006, writing 0x2900002)
[ 9571.137885] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 9571.138001] r8169 0000:01:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 9571.138015] r8169 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xdfd00000)
[ 9571.138030] r8169 0000:01:00.0: restoring config space at offset 0x8 (was 0xc, writing 0xffd0000c)
[ 9571.138041] r8169 0000:01:00.0: restoring config space at offset 0x6 (was 0xc, writing 0xffd1000c)
[ 9571.138053] r8169 0000:01:00.0: restoring config space at offset 0x4 (was 0x1, writing 0xd001)
[ 9571.138063] r8169 0000:01:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 9571.138074] r8169 0000:01:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100407)
[ 9571.138149] rt2800pci 0000:02:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10a)
[ 9571.138176] rt2800pci 0000:02:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xdfc00000)
[ 9571.138186] rt2800pci 0000:02:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 9571.138197] rt2800pci 0000:02:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 9571.138635] PM: early resume of devices complete after 1.446 msecs
[ 9571.138771] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9571.138783] i915 0000:00:02.0: setting latency timer to 64
[ 9571.138896] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 9571.138908] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 9571.138974] HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
[ 9571.139049] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
[ 9571.139068] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
[ 9571.139089] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9571.139101] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 9571.139131] usb usb2: root hub lost power or was reset
[ 9571.139157] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9571.139168] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 9571.139196] usb usb3: root hub lost power or was reset
[ 9571.139219] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 9571.139231] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 9571.139259] usb usb4: root hub lost power or was reset
[ 9571.139282] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 9571.139293] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 9571.139321] usb usb5: root hub lost power or was reset
[ 9571.139346] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 9571.139358] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 9571.139449] pci 0000:00:1e.0: setting latency timer to 64
[ 9571.139476] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 9571.139486] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 9571.139538] pcieport 0000:00:1c.0: wake-up capability disabled by ACPI
[ 9571.139550] r8169 0000:01:00.0: PME# disabled
[ 9571.141969] rt2800pci 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 9571.145983] sd 0:0:0:0: [sda] Starting disk
[ 9571.264132] PM: resume of drv:usb dev:usb2 complete after 119.924 msecs
[ 9571.264186] PM: resume of drv:hub dev:2-0:1.0 complete after 119.963 msecs
[ 9571.264214] PM: resume of drv:usb dev:usb3 complete after 119.706 msecs
[ 9571.264234] PM: resume of drv: dev:ep_00 complete after 119.835 msecs
[ 9571.264261] PM: resume of drv: dev:ep_81 complete after 119.988 msecs
[ 9571.264290] PM: resume of drv:usb dev:usb4 complete after 119.291 msecs
[ 9571.264351] PM: resume of drv: dev:ep_00 complete after 119.473 msecs
[ 9571.264430] PM: resume of drv: dev:ep_00 complete after 119.064 msecs
[ 9571.264438] PM: resume of drv:hub dev:3-0:1.0 complete after 119.797 msecs
[ 9571.264473] PM: resume of drv:hub dev:4-0:1.0 complete after 119.350 msecs
[ 9571.264480] PM: resume of drv: dev:ep_81 complete after 119.729 msecs
[ 9571.264494] PM: resume of drv: dev:ep_81 complete after 119.248 msecs
[ 9571.368095] PM: resume of drv:usb dev:usb5 complete after 222.601 msecs
[ 9571.368146] PM: resume of drv:hub dev:5-0:1.0 complete after 222.529 msecs
[ 9571.368239] PM: resume of drv: dev:ep_00 complete after 222.386 msecs
[ 9571.368255] PM: resume of drv: dev:ep_81 complete after 222.506 msecs
[ 9571.392091] PM: resume of drv:usb dev:usb1 complete after 250.062 msecs
[ 9571.392150] PM: resume of drv:hub dev:1-0:1.0 complete after 250.098 msecs
[ 9571.392187] PM: resume of drv:usb dev:1-2 complete after 241.293 msecs
[ 9571.392202] PM: resume of drv: dev:ep_00 complete after 248.046 msecs
[ 9571.392232] PM: resume of drv: dev:ep_81 complete after 248.138 msecs
[ 9571.392267] PM: resume of drv:usb-storage dev:1-2:1.0 complete after 241.254 msecs
[ 9571.392332] PM: resume of drv: dev:ep_00 complete after 240.727 msecs
[ 9571.392364] PM: resume of drv:scsi dev:host12 complete after 241.233 msecs
[ 9571.392418] PM: resume of drv: dev:ep_02 complete after 240.936 msecs
[ 9571.392429] PM: resume of drv: dev:ep_81 complete after 241.067 msecs
[ 9571.392462] PM: resume of drv:scsi_host dev:host12 complete after 241.217 msecs
[ 9571.392470] PM: resume of drv:scsi dev:target12:0:0 complete after 240.743 msecs
[ 9571.392505] PM: resume of drv:sd dev:12:0:0:0 complete after 240.670 msecs
[ 9571.392523] PM: resume of drv:scsi_device dev:12:0:0:0 complete after 240.570 msecs
[ 9571.504112] usb 1-6: reset high speed USB device using ehci_hcd and address 3
[ 9571.643857] PM: resume of drv:usb dev:1-6 complete after 497.571 msecs
[ 9571.643909] PM: resume of drv:usb-storage dev:1-6:1.0 complete after 497.520 msecs
[ 9571.643971] PM: resume of drv: dev:ep_00 complete after 497.223 msecs
[ 9571.644003] PM: resume of drv: dev:ep_01 complete after 497.494 msecs
[ 9571.644017] PM: resume of drv: dev:ep_82 complete after 497.375 msecs
[ 9571.644128] PM: resume of drv:scsi dev:host3 complete after 497.262 msecs
[ 9571.644191] PM: resume of drv:scsi_host dev:host3 complete after 497.197 msecs
[ 9571.644200] PM: resume of drv:scsi dev:target3:0:0 complete after 493.677 msecs
[ 9571.644230] PM: resume of drv:sd dev:3:0:0:0 complete after 493.591 msecs
[ 9571.644254] PM: resume of drv:scsi_device dev:3:0:0:0 complete after 493.491 msecs
[ 9571.648178] PM: resume of drv:battery dev:PNP0C0A:00 complete after 484.030 msecs
[ 9571.748098] usb 5-1: reset full speed USB device using uhci_hcd and address 2
[ 9571.774552] pciehp 0000:00:1c.0:pcie04: Card present on Slot(0)
[ 9571.876089] pciehp 0000:00:1c.0:pcie04: Device 0000:01:00.0 already exists at 0000:01:00, cannot hot-add
[ 9571.876106] pciehp 0000:00:1c.0:pcie04: Cannot add device at 0000:01:00
[ 9571.948547] btusb 5-1:1.0: no reset_resume for driver btusb?
[ 9571.948561] btusb 5-1:1.1: no reset_resume for driver btusb?
[ 9572.200441] PM: resume of drv:usb dev:5-1 complete after 1053.338 msecs
[ 9572.200513] PM: resume of drv:usb dev:5-1:1.0 complete after 1053.290 msecs
[ 9572.200521] PM: resume of drv: dev:ep_00 complete after 1050.136 msecs
[ 9572.200542] PM: resume of drv:usb dev:5-1:1.1 complete after 1052.837 msecs
[ 9572.200568] PM: resume of drv: dev:ep_82 complete after 1052.985 msecs
[ 9572.200577] PM: resume of drv: dev:ep_81 complete after 1053.234 msecs
[ 9572.200609] PM: resume of drv: dev:ep_83 complete after 1052.667 msecs
[ 9572.200617] PM: resume of drv: dev:ep_02 complete after 1053.147 msecs
[ 9572.200649] PM: resume of drv: dev:ep_03 complete after 1052.824 msecs
[ 9573.521249] ata1.00: configured for UDMA/133
[ 9573.524892] PM: resume of drv:sd dev:0:0:0:0 complete after 2378.909 msecs
[ 9573.524943] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 2378.776 msecs
[ 9573.524983] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1797.502 msecs
[ 9573.525396] PM: resume of devices complete after 2386.712 msecs
[ 9573.526114] PM: resume devices took 2.388 seconds
[ 9573.526222] PM: Finishing wakeup.
[ 9573.526226] Restarting tasks ...
[ 9573.528156] usb 1-2: USB disconnect, address 13
[ 9573.558525] done.
[ 9573.980471] video LNXVIDEO:00: Restoring backlight state
[ 9574.012699] atkbd serio0: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[ 9574.012712] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 9574.016740] atkbd serio0: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[ 9574.016753] atkbd serio0: Use 'setkeycodes e077 <keycode>' to make it known.
[ 9574.022347] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 9574.028244] composite sync not supported
[ 9574.849117] r8169 0000:01:00.0: eth0: link down
[ 9574.849929] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9574.892374] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no response from hardware
[ 9574.917020] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9574.977012] pciehp 0000:00:1c.1:pcie04: Card present on Slot(0-1)
[ 9575.080080] pciehp 0000:00:1c.1:pcie04: Device 0000:02:00.0 already exists at 0000:02:00, cannot hot-add
[ 9575.080097] pciehp 0000:00:1c.1:pcie04: Cannot add device at 0000:02:00
[ 9578.131675] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 9642.446744] wlan0: authenticate with 00:05:59:32:5a:bd (try 1)
[ 9642.448196] wlan0: authenticated
[ 9642.448439] wlan0: associate with 00:05:59:32:5a:bd (try 1)
[ 9642.468574] wlan0: RX AssocResp from 00:05:59:32:5a:bd (capab=0x431 status=0 aid=1)
[ 9642.468586] wlan0: associated
[ 9642.470063] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9652.544037] wlan0: no IPv6 routers present
[ 9736.232220] usb 1-2: new high speed USB device using ehci_hcd and address 14
[ 9736.368697] scsi13 : usb-storage 1-2:1.0
[ 9737.369583] scsi 13:0:0:0: Direct-Access PQ: 0 ANSI: 2 CCS
[ 9737.373876] sd 13:0:0:0: Attached scsi generic sg1 type 0
[ 9737.375573] sd 13:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 9737.375595] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 9737.381432] sd 13:0:0:0: [sdb] Test WP failed, assume Write Enabled
[ 9737.381447] sd 13:0:0:0: [sdb] Assuming drive cache: write through
[ 9737.381460] sd 13:0:0:0: [sdb] Attached SCSI disk
[10572.560083] usb 1-5: new high speed USB device using ehci_hcd and address 15
[10572.818546] Linux video capture interface: v2.00
[10572.873085] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0)
[10572.890021] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-5/1-5:1.0/input/input9
[10572.893356] usbcore: registered new interface driver uvcvideo
[10572.893367] USB Video Class driver (v1.0.0)
rallos200@rallos200-U-100:~$


[rallos200]

αυτο μ εβγαλε

[medigeek]

- Αφαίρεσε τον από την εξωτερική θήκη.
- Σβήσε τον υπολογιστή.
- Σύνδεσε τον στον υπολογιστή με SATA καλώδιο.
- Ξεκίνησε πάλι τον υπολογιστή.

- Εκτέλεσε τις εντολές:
α)

Κώδικας: Επιλογή όλων

sudo lshw -C storage,disk,volume > lshw.log

Περίμενε λίγο (5-10 δευτερόλεπτα συνήθως), μέχρι να διαβάσει τις συσκευές σου. Θα δημιουργήσει καινούργιο αρχείο στον προσωπικό σου φάκελο (lshw.log)
β)

Κώδικας: Επιλογή όλων

dmesg > dmesg.log

Θα δημιουργήσει καινούργιο αρχείο στον προσωπικό σου φάκελο (dmesg.log)

Άνοιξε τα δύο αρχεία με τον κειμενογράφο:

Κώδικας: Επιλογή όλων

gedit dmesg.log lshw.log

Δώσε ολόκληρο το περιεχόμενο και των δύο αρχείων (στον κειμενογράφο θα είναι δύο ταμπέλες "dmesg.log" και "lshw.log").

Μην ξεχάσεις να τα βάλεις σε [*code][*/code] tags (χωρίς τα αστεράκια).

[rallos200]

Κώδικας: Επιλογή όλων

rallos200@rallos200-U-100:~$ sudo lshw -C storage,disk,volume > lshw.log
[sudo] password for rallos200:
PCI (sysfs)


με την πρωτη εντολη.με την δευτερη οταν κανω κοπυ παστε η πρωτη εντολη εχει σβηστει και δεν κανει τπτ

[rallos200]

παιδες ευχαριστω ,,,τελικα το βρηκα..απο πισω ο σκληρος ειχε εναν διακοπτη(οχι αυτον που ανοιγει) που δεν ηξερα τι ηταν τον γυρισα και τον διαβασε τελικα,..χαχ..ελεος...ευχαριστω και παλι για την βοηθεια