- Κώδικας: Επιλογή όλων
gedit /var/log/dmesg
καμερα χωρις εικονα
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb
13 Δημοσιεύσεις
• Σελίδα 2 από 2 • 1, 2
Re: καμερα χωρις εικονα
από logari81 » 21 Ιαν 2009, 12:29
οχι δεν ηταν εντολη αυτο, αν θες να το ανοιξεις με εντολη δωσε
http://opensourceecology.org/
| Λειτουργικό: Ubuntu 10.04 lucid 64-bit | Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560 |
| Κάρτα γραφικών: ATI Device [1002:68c0] | Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01) |
- logari81
- Επίτιμο μέλος
- Δημοσιεύσεις: 6074
- Εγγραφή: 14 Μάιος 2008, 10:40
Re: καμερα χωρις εικονα
από mary » 22 Ιαν 2009, 14:47
- Κώδικας: Επιλογή όλων
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-23-generic (buildd@palmer) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Thu Nov 27 18:44:42 UTC 2008 (Ubuntu 2.6.24-23.46-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000002dff0000 (usable)
[ 0.000000] BIOS-e820: 000000002dff0000 - 000000002dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000002dff3000 - 000000002e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 735MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6540
[ 0.000000] Entering add_active_range(0, 0, 188400) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 188400
[ 0.000000] HighMem 188400 -> 188400
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 188400
[ 0.000000] On node 0 totalpages: 188400
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1439 pages used for memmap
[ 0.000000] Normal zone: 182865 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7F40 checksum 0
[ 0.000000] ACPI: RSDP 000F7F40, 0014 (r0 VIAP4M)
[ 0.000000] ACPI: RSDT 2DFF3000, 002C (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 2DFF3040, 0074 (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 2DFF30C0, 39E3 (r1 VIAP4M AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 2DFF0000, 0040
[ 0.000000] ACPI: APIC 2DFF6AC0, 007C (r1 VIAP4M AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:2 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 2e000000:d0c00000)
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 186929
[ 0.000000] Kernel command line: root=UUID=5e5779d4-5047-4d85-a55c-4b4449d45afb ro quiet splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2484.219 MHz processor.
[ 47.811309] Console: colour VGA+ 80x25
[ 47.811315] console [tty0] enabled
[ 47.812350] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 47.813986] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 47.834295] Memory: 734472k/753600k available (2178k kernel code, 18544k reserved, 1005k data, 368k init, 0k highmem)
[ 47.834307] virtual kernel memory layout:
[ 47.834308] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 47.834309] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 47.834311] vmalloc : 0xee800000 - 0xff7fe000 ( 271 MB)
[ 47.834312] lowmem : 0xc0000000 - 0xedff0000 ( 735 MB)
[ 47.834313] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
[ 47.834314] .data : 0xc0320918 - 0xc041bdc4 (1005 kB)
[ 47.834315] .text : 0xc0100000 - 0xc0320918 (2178 kB)
[ 47.834319] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 47.834368] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 47.914362] Calibrating delay using timer specific routine.. 4974.44 BogoMIPS (lpj=9948890)
[ 47.914405] Security Framework initialized
[ 47.914417] SELinux: Disabled at boot.
[ 47.914438] AppArmor: AppArmor initialized
[ 47.914445] Failure registering capabilities with primary security module.
[ 47.914461] Mount-cache hash table entries: 512
[ 47.914691] Initializing cgroup subsys ns
[ 47.914703] Initializing cgroup subsys cpuacct
[ 47.914725] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[ 47.914742] CPU: Trace cache: 12K uops, L1 D cache: 8K
[ 47.914746] CPU: L2 cache: 128K
[ 47.914750] CPU: Hyper-Threading is disabled
[ 47.914753] CPU: After all inits, caps: bfebfbff 00000000 00000000 00043080 00004400 00000000 00000000 00000000
[ 47.914770] Compat vDSO mapped to ffffe000.
[ 47.914793] Checking 'hlt' instruction... OK.
[ 47.930899] SMP alternatives: switching to UP code
[ 47.933085] Freeing SMP alternatives: 11k freed
[ 47.933300] Early unpacking initramfs... done
[ 48.347357] ACPI: Core revision 20070126
[ 48.347436] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 48.352214] CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
[ 48.352263] Total of 1 processors activated (4974.44 BogoMIPS).
[ 48.352990] ENABLING IO-APIC IRQs
[ 48.353312] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 48.498267] Brought up 1 CPUs
[ 48.498342] CPU0 attaching sched-domain:
[ 48.498346] domain 0: span 01
[ 48.498349] groups: 01
[ 48.498850] net_namespace: 64 bytes
[ 48.498867] Booting paravirtualized kernel on bare hardware
[ 48.499726] Time: 10:03:31 Date: 01/22/09
[ 48.499789] NET: Registered protocol family 16
[ 48.500756] EISA bus registered
[ 48.500810] ACPI: bus type pci registered
[ 48.508156] PCI: PCI BIOS revision 2.10 entry at 0xfb720, last bus=1
[ 48.508161] PCI: Using configuration type 1
[ 48.508180] Setting up standard PCI resources
[ 48.519332] ACPI: EC: Look up EC in DSDT
[ 48.524176] ACPI: Interpreter enabled
[ 48.524186] ACPI: (supports S0 S1 S4 S5)
[ 48.524208] ACPI: Using IOAPIC for interrupt routing
[ 48.536789] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 48.537513] PCI quirk: region 0400-047f claimed by vt8235 PM
[ 48.537520] PCI quirk: region 0500-050f claimed by vt8235 SMB
[ 48.538059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 48.557869] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[ 48.558180] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[ 48.558435] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[ 48.558668] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[ 48.558882] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 48.559085] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 48.559289] ACPI: PCI Interrupt Link [LNK0] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 48.559493] ACPI: PCI Interrupt Link [LNK1] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 48.559727] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
[ 48.559959] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
[ 48.560212] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
[ 48.560438] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0
[ 48.560854] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 48.560978] pnp: PnP ACPI init
[ 48.560998] ACPI: bus type pnp registered
[ 48.566685] pnp: PnP ACPI: found 12 devices
[ 48.566694] ACPI: ACPI bus type pnp unregistered
[ 48.566701] PnPBIOS: Disabled by ACPI PNP
[ 48.567774] PCI: Using ACPI for IRQ routing
[ 48.567782] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 48.618098] NET: Registered protocol family 8
[ 48.618103] NET: Registered protocol family 20
[ 48.618309] AppArmor: AppArmor Filesystem Enabled
[ 48.622070] Time: tsc clocksource has been installed.
[ 48.630266] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 48.630271] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 48.630274] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 48.630277] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 48.630281] system 00:00: iomem range 0x2dff0000-0x2dffffff could not be reserved
[ 48.630285] system 00:00: iomem range 0xffff0000-0xffffffff could not be reserved
[ 48.630288] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 48.630291] system 00:00: iomem range 0x100000-0x2dfeffff could not be reserved
[ 48.630294] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 48.630298] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 48.630301] system 00:00: iomem range 0xfff80000-0xfffeffff could not be reserved
[ 48.630313] system 00:02: ioport range 0x400-0x47f has been reserved
[ 48.630316] system 00:02: ioport range 0x500-0x50f has been reserved
[ 48.630333] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 48.630337] system 00:03: ioport range 0x294-0x297 has been reserved
[ 48.662040] PCI: Bridge: 0000:00:01.0
[ 48.662054] IO window: disabled.
[ 48.662061] MEM window: ec000000-edffffff
[ 48.662066] PREFETCH window: e0000000-e7ffffff
[ 48.662089] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 48.662116] NET: Registered protocol family 2
[ 48.702188] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 48.702808] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 48.704678] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 48.705818] TCP: Hash tables configured (established 131072 bind 65536)
[ 48.705826] TCP reno registered
[ 48.714314] checking if image is initramfs... it is
[ 49.161855] Switched to high resolution mode on CPU 0
[ 49.479502] Freeing initrd memory: 7716k freed
[ 49.481531] audit: initializing netlink socket (disabled)
[ 49.481557] audit(1232618611.540:1): initialized
[ 49.488034] VFS: Disk quotas dquot_6.5.1
[ 49.488242] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 49.488615] io scheduler noop registered
[ 49.488621] io scheduler anticipatory registered
[ 49.488623] io scheduler deadline registered
[ 49.488665] io scheduler cfq registered (default)
[ 49.488684] PCI: VIA PCI bridge detected. Disabling DAC.
[ 49.488758] Boot video device is 0000:01:00.0
[ 49.489860] isapnp: Scanning for PnP cards...
[ 49.843882] isapnp: No Plug & Play device found
[ 50.047617] Real Time Clock Driver v1.12ac
[ 50.047959] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 50.048226] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 50.050990] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 50.051665] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 16
[ 50.053492] 0000:00:07.0: ttyS1 at I/O 0xd008 (irq = 16) is a 16450
[ 50.054584] 0000:00:07.0: ttyS2 at I/O 0xd010 (irq = 16) is a 8250
[ 50.055675] 0000:00:07.0: ttyS3 at I/O 0xd018 (irq = 16) is a 16450
[ 50.056096] Couldn't register serial port 0000:00:07.0: -28
[ 50.058497] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 50.058707] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 50.059053] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 50.059060] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 50.059420] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 50.069706] mice: PS/2 mouse device common for all mice
[ 50.070225] EISA: Probing bus 0 at eisa.0
[ 50.070264] EISA: Detected 0 cards.
[ 50.070270] cpuidle: using governor ladder
[ 50.070273] cpuidle: using governor menu
[ 50.070443] NET: Registered protocol family 1
[ 50.070510] Using IPI No-Shortcut mode
[ 50.070583] registered taskstats version 1
[ 50.070721] Magic number: 9:194:73
[ 50.070926] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 50.070928] EDD information not available.
[ 50.071573] Freeing unused kernel memory: 368k freed
[ 50.071611] Write protecting the kernel read-only data: 801k
[ 50.088832] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 51.551864] fuse init (API version 7.9)
[ 51.586273] ACPI: Fan [FAN] (on)
[ 51.598768] ACPI Exception (processor_core-0822): AE_NOT_FOUND, Processor Device is not present [20070126]
[ 51.601538] ACPI: Thermal Zone [THRM] (32 C)
[ 52.592090] usbcore: registered new interface driver usbfs
[ 52.592135] usbcore: registered new interface driver hub
[ 52.608925] usbcore: registered new device driver usb
[ 52.623978] USB Universal Host Controller Interface driver v3.0
[ 52.624433] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[ 52.624440] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[ 52.624452] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 52.624471] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 52.625158] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 52.625209] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d400
[ 52.625461] usb usb1: configuration #1 chosen from 1 choice
[ 52.625513] hub 1-0:1.0: USB hub found
[ 52.625527] hub 1-0:1.0: 2 ports detected
[ 52.722441] SCSI subsystem initialized
[ 52.735230] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 52.735253] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 52.735322] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 52.735357] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000d800
[ 52.735556] usb usb2: configuration #1 chosen from 1 choice
[ 52.735626] hub 2-0:1.0: USB hub found
[ 52.735644] hub 2-0:1.0: 2 ports detected
[ 52.829587] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 52.829597] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 52.831171] libata version 3.00 loaded.
[ 52.836044] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 52.836069] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 52.836136] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 52.836170] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000dc00
[ 52.836389] usb usb3: configuration #1 chosen from 1 choice
[ 52.836445] hub 3-0:1.0: USB hub found
[ 52.836459] hub 3-0:1.0: 2 ports detected
[ 52.924703] Floppy drive(s): fd0 is 1.44M
[ 52.940233] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 17
[ 52.940261] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 52.940344] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 52.940411] ehci_hcd 0000:00:10.3: irq 17, io mem 0xee001000
[ 52.946137] FDC 0 is a post-1991 82077
[ 52.951767] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 52.952018] usb usb4: configuration #1 chosen from 1 choice
[ 52.952079] hub 4-0:1.0: USB hub found
[ 52.952096] hub 4-0:1.0: 6 ports detected
[ 53.056492] ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
[ 53.056500] ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
[ 53.056512] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 18
[ 53.060723] eth0: VIA Rhine II at 0xee002000, 00:0c:76:8e:f5:aa, IRQ 18.
[ 53.061412] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 53.062019] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 53.062026] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 53.062037] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 19
[ 53.062136] ACPI: PCI interrupt for device 0000:00:11.1 disabled
[ 53.068103] pata_via 0000:00:11.1: version 0.3.3
[ 53.068146] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 19
[ 53.070338] scsi0 : pata_via
[ 53.073128] scsi1 : pata_via
[ 53.076624] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 53.076629] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 53.416125] ata1.00: ATA-6: ST340014A, 3.06, max UDMA/100
[ 53.416131] ata1.00: 78165360 sectors, multi 16: LBA48
[ 53.416348] ata1.01: ATA-6: WDC WD400JB-00FMA0, 13.03G13, max UDMA/100
[ 53.416353] ata1.01: 78165360 sectors, multi 16: LBA
[ 53.432712] ata1.00: configured for UDMA/100
[ 53.447933] ata1.01: configured for UDMA/100
[ 53.835269] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 54.082784] usb 4-2: configuration #1 chosen from 1 choice
[ 54.323006] usb 4-3: new high speed USB device using ehci_hcd and address 3
[ 54.455452] usb 4-3: configuration #1 chosen from 1 choice
[ 54.456146] hub 4-3:1.0: USB hub found
[ 54.456442] hub 4-3:1.0: 4 ports detected
[ 54.958772] usb 4-3.2: new full speed USB device using ehci_hcd and address 5
[ 55.067746] usb 4-3.2: configuration #1 chosen from 1 choice
[ 55.282598] usb 4-3.3: new high speed USB device using ehci_hcd and address 6
[ 55.392200] usb 4-3.3: configuration #1 chosen from 1 choice
[ 55.634255] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 55.815269] usb 2-2: configuration #1 chosen from 1 choice
[ 55.826256] usbcore: registered new interface driver libusual
[ 55.842274] Initializing USB Mass Storage driver...
[ 55.855100] scsi2 : SCSI emulation for USB Mass Storage devices
[ 55.857046] usbcore: registered new interface driver usb-storage
[ 55.857056] USB Mass Storage support registered.
[ 55.857325] usbcore: registered new interface driver hiddev
[ 55.857411] usb-storage: device found at 6
[ 55.857415] usb-storage: waiting for device to settle before scanning
[ 55.870529] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0/input/input2
[ 55.882264] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:10.1-2
[ 55.882298] usbcore: registered new interface driver usbhid
[ 55.882304] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 58.640600] ata2: port is slow to respond, please be patient (Status 0x80)
[ 60.851569] usb-storage: device scan complete
[ 60.852174] scsi 2:0:0:0: Direct-Access SAMSUNG HM320JI PQ: 0 ANSI: 2 CCS
[ 60.865142] Driver 'sd' needs updating - please use bus_type methods
[ 60.866293] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 60.867055] sd 2:0:0:0: [sda] Write Protect is off
[ 60.867063] sd 2:0:0:0: [sda] Mode Sense: 00 38 00 00
[ 60.867067] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 60.868668] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 60.869430] sd 2:0:0:0: [sda] Write Protect is off
[ 60.869438] sd 2:0:0:0: [sda] Mode Sense: 00 38 00 00
[ 60.869442] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 60.869455] sda: sda1
[ 61.472254] sd 2:0:0:0: [sda] Attached SCSI disk
[ 61.483163] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 63.453967] ata2: SRST failed (errno=-16)
[ 63.794335] ata2.01: ATAPI: ASUS DRW-1608P3S, 1.06, max UDMA/66
[ 63.794356] ata2.01: limited to UDMA/33 due to 40-wire cable
[ 63.966000] ata2.01: configured for UDMA/33
[ 63.966250] scsi 0:0:0:0: Direct-Access ATA ST340014A 3.06 PQ: 0 ANSI: 5
[ 63.967297] sd 0:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
[ 63.967340] sd 0:0:0:0: [sdb] Write Protect is off
[ 63.967345] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 63.967402] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 63.967557] sd 0:0:0:0: [sdb] 78165360 512-byte hardware sectors (40021 MB)
[ 63.967592] sd 0:0:0:0: [sdb] Write Protect is off
[ 63.967597] sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 63.967652] sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 63.967661] sdb: sdb1 sdb2 < sdb5 >
[ 64.006717] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 64.006798] sd 0:0:0:0: Attached scsi generic sg1 type 0
[ 64.009279] scsi 0:0:1:0: Direct-Access ATA WDC WD400JB-00FM 13.0 PQ: 0 ANSI: 5
[ 64.010392] sd 0:0:1:0: [sdc] 78165360 512-byte hardware sectors (40021 MB)
[ 64.010436] sd 0:0:1:0: [sdc] Write Protect is off
[ 64.010440] sd 0:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 64.010505] sd 0:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.010650] sd 0:0:1:0: [sdc] 78165360 512-byte hardware sectors (40021 MB)
[ 64.010684] sd 0:0:1:0: [sdc] Write Protect is off
[ 64.010688] sd 0:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 64.010751] sd 0:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.010762] sdc: sdc1 sdc2 < sdc5 sdc6 >
[ 64.041127] sd 0:0:1:0: [sdc] Attached SCSI disk
[ 64.041206] sd 0:0:1:0: Attached scsi generic sg2 type 0
[ 64.048178] scsi 1:0:1:0: CD-ROM ASUS DRW-1608P3S 1.06 PQ: 0 ANSI: 5
[ 64.048351] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 64.125702] Driver 'sr' needs updating - please use bus_type methods
[ 64.156498] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 64.156508] Uniform CD-ROM driver Revision: 3.20
[ 64.156608] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 64.675880] Attempting manual resume
[ 64.675888] swsusp: Resume From Partition 8:37
[ 64.675890] PM: Checking swsusp image.
[ 64.676207] PM: Resume from disk failed.
[ 64.726026] kjournald starting. Commit interval 5 seconds
[ 64.726059] EXT3-fs: mounted filesystem with ordered data mode.
[ 73.452644] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 73.488554] Linux agpgart interface v0.102
[ 73.533844] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 73.573661] agpgart: Detected VIA P4M266x/P4N266 chipset
[ 73.578645] agpgart: AGP aperture is 64M @ 0xe8000000
[ 73.636866] input: Power Button (FF) as /devices/virtual/input/input3
[ 73.656416] ACPI: Power Button (FF) [PWRF]
[ 73.656659] input: Power Button (CM) as /devices/virtual/input/input4
[ 73.668417] ACPI: Power Button (CM) [PWRB]
[ 75.374163] Linux video capture interface: v2.00
[ 75.473100] uvcvideo: Found UVC 1.00 device <unnamed> (046d:09a1)
[ 75.503306] usbcore: registered new interface driver uvcvideo
[ 75.503316] USB Video Class driver (v0.1.0)
[ 75.596096] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: USB GSPCA camera found. SONIX sn9c10[1 2]
[ 75.597274] usbcore: registered new interface driver gspca
[ 75.597284] /build/buildd/linux-ubuntu-modules-2.6.24-2.6.24/debian/build/build-generic/media/gspcav1/gspca_core.c: gspca driver 01.00.20 registered
[ 75.747326] sn9c102: V4L2 driver for SN9C1xx PC Camera Controllers v1:1.47
[ 75.748077] usbcore: registered new interface driver sn9c102
[ 76.156131] irda_init()
[ 76.156174] NET: Registered protocol family 23
[ 76.539556] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 77.279766] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[ 77.279775] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[ 77.279787] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 20
[ 77.279955] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 77.342824] usbcore: registered new interface driver snd-usb-audio
[ 77.362957] parport_pc 00:0a: reported by Plug and Play ACPI
[ 77.363068] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 81.165557] lp0: using parport0 (interrupt-driven).
[ 81.344969] Adding 1646620k swap on /dev/sdb5. Priority:-1 extents:1 across:1646620k
[ 81.964959] EXT3 FS on sdb1, internal journal
[ 82.179875] device-mapper: uevent: version 1.0.3
[ 82.179935] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 83.839658] ip_tables: (C) 2000-2006 Netfilter Core Team
Τελευταία επεξεργασία από linuxman και 22 Ιαν 2009, 14:50, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Add tags [code][/code]
Αιτία: Add tags [code][/code]
- mary
- babeTUX
- Δημοσιεύσεις: 10
- Εγγραφή: 20 Ιαν 2009, 01:13
Re: καμερα χωρις εικονα
από mary » 23 Ιαν 2009, 22:24
ξαναστελνω το αρχειο,γιατι νομιζω οτι οταν το κατεβασα ειχα αλλη καμερα συνδεδεμενη για τεστ(η οποια λειτουργουσε αλλα ειχε πολυ μικρη αναλυση και χαλια εικονα)sorry για το μπερδεμα.
Spoiler: show
Τελευταία επεξεργασία από linuxman και 23 Ιαν 2009, 22:39, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Add tags [code][/code]
Αιτία: Add tags [code][/code]
- mary
- babeTUX
- Δημοσιεύσεις: 10
- Εγγραφή: 20 Ιαν 2009, 01:13
13 Δημοσιεύσεις
• Σελίδα 2 από 2 • 1, 2