Το 11.04 δεν "βλέπει" το TURBO-X DTT-1000 USB TV TUNER

[dancer_69]

Δοκίμασα και το πρώτο link και αρκετά από αυτά στο δεύτερο(μερικά -τα πιο σχετικά- υπήρχαν ήδη) χωρίς επιτυχία.

[Learner]

Βρήκα ένα site με όλες τις υποστηριζόμενες συσκευές usb (και τους drivers) . Δυστυχώς το tuner σου δεν το είδα.. Κάνω μια παράθεση.

Κώδικας: Επιλογή όλων

1b80 Afatech
c810 MC810 [af9015]
d393 DVB-T receiver [RTL2832U]
d396 UB396-T [RTL2832U]
d397 DVB-T receiver [RTL2832U]
d398 DVB-T receiver [RTL2832U]
d700 FM Radio SnapMusic Mobile 700 (FM700)
e297 Conceptronic DVB-T CTVDIGRCU V3.0
e383 DVB-T UB383-T [af9015]
e385 DVB-T UB385-T [af9015]
e386 DVB-T UB385-T [af9015]
e399 DVB-T KWorld PlusTV 399U [af9015]
e39a DVB-T395U [af9015]
e39b DVB-T395U [af9015]
e409 IT9137FN Dual DVB-T [KWorld UB499-2T

Το site εδώ -- > http://www.linux-usb.org/usb.ids

Βρήκα και ένα ίδιο θέμα με το δικό σου εδώ στο φορουμ που δυστυχώς ούτε αυτό έχει επιλυθεί .. -- > viewtopic.php?f=24&t=21403#p221956
Δεν έχω κάποια άλλη ιδέα .

[the_eye]

Εγκατέστησε το

Κώδικας: Επιλογή όλων

linux-firmware-nonfree

κάνε επανεκκίνηση και δώσε μας το

Κώδικας: Επιλογή όλων

dmesg

το tuner σου θέλει το firmware Conexant cx231xx USB το οποίο υπάρχει εδώ http://linuxtv.org/downloads/firmware/#3

[dancer_69]

Κώδικας: Επιλογή όλων

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-24-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #39-Ubuntu SMP Mon May 21 16:52:17 UTC 2012 (Ubuntu 3.2.0-24.39-generic 3.2.16)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=0ddcf6a2-77d7-4880-9642-516c52e132f8 ro reboot=pci quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000000f00000 (usable)
[ 0.000000] BIOS-e820: 0000000000f00000 - 0000000001000000 (reserved)
[ 0.000000] BIOS-e820: 0000000001000000 - 00000000bfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe90000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.5 present.
[ 0.000000] DMI: System Manufact System Product/LP DK P45-T2RS PLUS, BIOS 6.00 PG 03/20/2009
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbfe90 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 2 base 000F00000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 4GB, type WB
[ 0.000000] reg 1, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 2, base: 15MB, range: 1MB, type UC
[ 0.000000] reg 3, base: 3071MB, range: 1MB, type UC
[ 0.000000] total RAM covered: 3070M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 1G num_reg: 5 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 15MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1GB, range: 1GB, type WB
[ 0.000000] reg 3, base: 2GB, range: 1GB, type WB
[ 0.000000] reg 4, base: 3071MB, range: 1MB, type UC
[ 0.000000] e820 update range: 0000000000f00000 - 0000000001000000 (usable) ==> (reserved)
[ 0.000000] found SMP MP-table at [ffff8800000f49e0] f49e0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe90000
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to bfe90000 @ 1fffb000-20000000
[ 0.000000] RAMDISK: 364cc000 - 3725e000
[ 0.000000] ACPI: RSDP 00000000000f8b50 00014 (v00 IntelR)
[ 0.000000] ACPI: RSDT 00000000bfee3000 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bfee3080 00084 (v02 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bfee3140 0508D (v01 INTELR AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfe90000 00040
[ 0.000000] ACPI: HPET 00000000bfee82c0 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bfee8300 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bfee8200 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: SSDT 00000000bfee89a0 00590 (v01 PmRef CpuPm 00003000 INTL 20050309)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bfe90000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bfe90000
[ 0.000000] NODE_DATA [00000000bfe8b000 - 00000000bfe8ffff]
[ 0.000000] [ffffea0000000000-ffffea0002ffffff] PMD -> [ffff8800bc600000-ffff8800bf5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x00000f00
[ 0.000000] 0: 0x00001000 -> 0x000bfe90
[ 0.000000] On node 0 totalpages: 785694
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3657 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12219 pages used for memmap
[ 0.000000] DMA32 zone: 769749 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000000f00000 - 0000000001000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s83072 r8192 d23424 u524288
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773406
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-24-generic root=UUID=0ddcf6a2-77d7-4880-9642-516c52e132f8 ro reboot=pci quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3063448k/3144256k available (6567k kernel code, 1480k absent, 79328k reserved, 6636k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:712 16
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 25165824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1995.806 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.61 BogoMIPS (lpj=7983224)
[ 0.004010] pid_max: default: 32768 minimum: 301
[ 0.004041] Security Framework initialized
[ 0.004063] AppArmor: AppArmor initialized
[ 0.004065] Yama: becoming mindful.
[ 0.004567] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008645] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010147] Mount-cache hash table entries: 256
[ 0.010357] Initializing cgroup subsys cpuacct
[ 0.010365] Initializing cgroup subsys memory
[ 0.010377] Initializing cgroup subsys devices
[ 0.010380] Initializing cgroup subsys freezer
[ 0.010383] Initializing cgroup subsys blkio
[ 0.010392] Initializing cgroup subsys perf_event
[ 0.010431] CPU: Physical Processor ID: 0
[ 0.010432] CPU: Processor Core ID: 0
[ 0.010435] mce: CPU supports 6 MCE banks
[ 0.010445] CPU0: Thermal monitoring enabled (TM2)
[ 0.010450] using mwait in idle threads.
[ 0.013331] ACPI: Core revision 20110623
[ 0.018318] ftrace: allocating 27050 entries in 107 pages
[ 0.020441] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062986] CPU0: Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz stepping 0d
[ 0.064003] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.064003] PEBS disabled due to CPU errata.
[ 0.064003] ... version: 2
[ 0.064003] ... bit width: 40
[ 0.064003] ... generic registers: 2
[ 0.064003] ... value mask: 000000ffffffffff
[ 0.064003] ... max period: 000000007fffffff
[ 0.064003] ... fixed-purpose events: 3
[ 0.064003] ... event mask: 0000000700000003
[ 0.064003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.064003] Booting Node 0, Processors #1
[ 0.064003] smpboot cpu 1: start_ip = 99000
[ 0.152043] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.152089] Brought up 2 CPUs
[ 0.152093] Total of 2 processors activated (7982.79 BogoMIPS).
[ 0.153104] devtmpfs: initialized
[ 0.153883] EVM: security.selinux
[ 0.153885] EVM: security.SMACK64
[ 0.153887] EVM: security.capability
[ 0.153947] PM: Registering ACPI NVS region at bfe90000 (339968 bytes)
[ 0.156107] print_constraints: dummy:
[ 0.156137] RTC time: 21:54:13, date: 05/27/12
[ 0.156181] NET: Registered protocol family 16
[ 0.156274] Trying to unpack rootfs image as initramfs...
[ 0.156364] ACPI: bus type pci registered
[ 0.156438] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.156442] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.203034] PCI: Using configuration type 1 for base access
[ 0.208197] bio: create slab <bio-0> at 0
[ 0.208319] ACPI: Added _OSI(Module Device)
[ 0.208321] ACPI: Added _OSI(Processor Device)
[ 0.208324] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.208326] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.209492] ACPI: EC: Look up EC in DSDT
[ 0.213721] ACPI: SSDT 00000000bfee8380 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20050309)
[ 0.213999] ACPI: Dynamic OEM Table Load:
[ 0.214003] ACPI: SSDT (null) 0026C (v01 PmRef Cpu0Ist 00003000 INTL 20050309)
[ 0.214306] ACPI: SSDT 00000000bfee8840 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20050309)
[ 0.214574] ACPI: Dynamic OEM Table Load:
[ 0.214577] ACPI: SSDT (null) 00152 (v01 PmRef Cpu1Ist 00003000 INTL 20050309)
[ 0.214809] ACPI: Interpreter enabled
[ 0.214814] ACPI: (supports S0 S3 S4 S5)
[ 0.214835] ACPI: Using IOAPIC for interrupt routing
[ 0.220277] ACPI: No dock devices found.
[ 0.220281] HEST: Table not found.
[ 0.220285] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.220357] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.220492] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.220496] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.220499] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.220502] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.220504] pci_root PNP0A08:00: host bridge window [mem 0xbff00000-0xfebfffff]
[ 0.220521] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.220573] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.220624] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.220628] pci 0000:00:01.0: PME# disabled
[ 0.220654] pci 0000:00:06.0: [8086:2e29] type 1 class 0x000604
[ 0.220702] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.220705] pci 0000:00:06.0: PME# disabled
[ 0.220746] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.220793] pci 0000:00:1a.0: reg 20: [io 0xff00-0xff1f]
[ 0.220850] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.220896] pci 0000:00:1a.1: reg 20: [io 0xfe00-0xfe1f]
[ 0.220954] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.221004] pci 0000:00:1a.2: reg 20: [io 0xfd00-0xfd1f]
[ 0.221064] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.221082] pci 0000:00:1a.7: reg 10: [mem 0xfdfff000-0xfdfff3ff]
[ 0.221164] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.221169] pci 0000:00:1a.7: PME# disabled
[ 0.221191] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.221208] pci 0000:00:1b.0: reg 10: [mem 0xfdff4000-0xfdff7fff 64bit]
[ 0.221281] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.221285] pci 0000:00:1b.0: PME# disabled
[ 0.221308] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.221386] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.221391] pci 0000:00:1c.0: PME# disabled
[ 0.221417] pci 0000:00:1c.4: [8086:3a48] type 1 class 0x000604
[ 0.221492] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.221496] pci 0000:00:1c.4: PME# disabled
[ 0.221519] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.221597] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.221602] pci 0000:00:1c.5: PME# disabled
[ 0.221630] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.221676] pci 0000:00:1d.0: reg 20: [io 0xfc00-0xfc1f]
[ 0.221732] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.221781] pci 0000:00:1d.1: reg 20: [io 0xfb00-0xfb1f]
[ 0.221838] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.221884] pci 0000:00:1d.2: reg 20: [io 0xfa00-0xfa1f]
[ 0.221945] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.221963] pci 0000:00:1d.7: reg 10: [mem 0xfdffe000-0xfdffe3ff]
[ 0.222041] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.222046] pci 0000:00:1d.7: PME# disabled
[ 0.222065] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.222134] pci 0000:00:1f.0: [8086:3a16] type 0 class 0x000601
[ 0.222219] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 003f)
[ 0.222224] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0100 (mask 003f)
[ 0.222228] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0290 (mask 000f)
[ 0.222281] pci 0000:00:1f.2: [8086:3a22] type 0 class 0x000106
[ 0.222301] pci 0000:00:1f.2: reg 10: [io 0xf900-0xf907]
[ 0.222310] pci 0000:00:1f.2: reg 14: [io 0xf800-0xf803]
[ 0.222320] pci 0000:00:1f.2: reg 18: [io 0xf700-0xf707]
[ 0.222329] pci 0000:00:1f.2: reg 1c: [io 0xf600-0xf603]
[ 0.222338] pci 0000:00:1f.2: reg 20: [io 0xf500-0xf51f]
[ 0.222348] pci 0000:00:1f.2: reg 24: [mem 0xfdffd000-0xfdffd7ff]
[ 0.222402] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.222407] pci 0000:00:1f.2: PME# disabled
[ 0.222426] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.222442] pci 0000:00:1f.3: reg 10: [mem 0xfdffc000-0xfdffc0ff 64bit]
[ 0.222466] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.222538] pci 0000:01:00.0: [1002:9498] type 0 class 0x000300
[ 0.222554] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.222566] pci 0000:01:00.0: reg 18: [mem 0xfdae0000-0xfdaeffff 64bit]
[ 0.222575] pci 0000:01:00.0: reg 20: [io 0xae00-0xaeff]
[ 0.222590] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.222626] pci 0000:01:00.0: supports D1 D2
[ 0.222649] pci 0000:01:00.1: [1002:aa38] type 0 class 0x000403
[ 0.222665] pci 0000:01:00.1: reg 10: [mem 0xfdafc000-0xfdafffff 64bit]
[ 0.222736] pci 0000:01:00.1: supports D1 D2
[ 0.222770] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.222774] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.222778] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.222783] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.222826] pci 0000:02:00.0: [1002:9498] type 0 class 0x000300
[ 0.222843] pci 0000:02:00.0: reg 10: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.222858] pci 0000:02:00.0: reg 18: [mem 0xfd7e0000-0xfd7effff 64bit]
[ 0.222868] pci 0000:02:00.0: reg 20: [io 0xbe00-0xbeff]
[ 0.222887] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.222930] pci 0000:02:00.0: supports D1 D2
[ 0.222956] pci 0000:02:00.1: [1002:aa38] type 0 class 0x000403
[ 0.222974] pci 0000:02:00.1: reg 10: [mem 0xfd7fc000-0xfd7fffff 64bit]
[ 0.223053] pci 0000:02:00.1: supports D1 D2
[ 0.223092] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.223096] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
[ 0.223100] pci 0000:00:06.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.223105] pci 0000:00:06.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.223148] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.223152] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.223156] pci 0000:00:1c.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.223163] pci 0000:00:1c.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.223224] pci 0000:04:00.0: [197b:2363] type 0 class 0x000101
[ 0.223320] pci 0000:04:00.0: reg 24: [mem 0xfdefe000-0xfdefffff]
[ 0.223388] pci 0000:04:00.0: PME# supported from D3hot
[ 0.223394] pci 0000:04:00.0: PME# disabled
[ 0.223425] pci 0000:04:00.1: [197b:2363] type 0 class 0x000101
[ 0.223451] pci 0000:04:00.1: reg 10: [io 0xdf00-0xdf07]
[ 0.223466] pci 0000:04:00.1: reg 14: [io 0xde00-0xde03]
[ 0.223480] pci 0000:04:00.1: reg 18: [io 0xdd00-0xdd07]
[ 0.223495] pci 0000:04:00.1: reg 1c: [io 0xdc00-0xdc03]
[ 0.223510] pci 0000:04:00.1: reg 20: [io 0xdb00-0xdb0f]
[ 0.223601] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.223616] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.223621] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.223625] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.223632] pci 0000:00:1c.4: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.223697] pci 0000:05:00.0: [11ab:4362] type 0 class 0x000200
[ 0.223721] pci 0000:05:00.0: reg 10: [mem 0xfdcfc000-0xfdcfffff 64bit]
[ 0.223735] pci 0000:05:00.0: reg 18: [io 0xce00-0xceff]
[ 0.223783] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.223854] pci 0000:05:00.0: supports D1 D2
[ 0.223856] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.223862] pci 0000:05:00.0: PME# disabled
[ 0.223876] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.223886] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.223890] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.223895] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.223901] pci 0000:00:1c.5: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.223974] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.223979] pci 0000:00:1e.0: bridge window [io 0x8000-0x8fff]
[ 0.223984] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.223991] pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.223994] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.223997] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.224000] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.224003] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.224006] pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xfebfffff] (subtractive decode)
[ 0.224052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.224193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.224238] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.224269] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
[ 0.224300] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.224433] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.224437] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.224439] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.234727] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.234786] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.234841] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12 14 15)
[ 0.234893] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.234945] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[ 0.234997] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[ 0.235049] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 12 14 15)
[ 0.235100] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[ 0.235279] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.235285] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=none,locks=none
[ 0.235291] vgaarb: loaded
[ 0.235293] vgaarb: bridge control possible 0000:02:00.0
[ 0.235295] vgaarb: bridge control possible 0000:01:00.0
[ 0.235422] i2c-core: driver [aat2870] using legacy suspend method
[ 0.235424] i2c-core: driver [aat2870] using legacy resume method
[ 0.235515] SCSI subsystem initialized
[ 0.235590] libata version 3.00 loaded.
[ 0.235650] usbcore: registered new interface driver usbfs
[ 0.235663] usbcore: registered new interface driver hub
[ 0.235697] usbcore: registered new device driver usb
[ 0.235820] PCI: Using ACPI for IRQ routing
[ 0.242379] PCI: pci_cache_line_size set to 64 bytes
[ 0.242507] reserve RAM buffer: 000000000009e400 - 000000000009ffff
[ 0.242510] reserve RAM buffer: 00000000bfe90000 - 00000000bfffffff
[ 0.242679] NetLabel: Initializing
[ 0.242682] NetLabel: domain hash size = 128
[ 0.242684] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.242697] NetLabel: unlabeled traffic allowed by default
[ 0.242780] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.242786] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.242792] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.252141] Switching to clocksource hpet
[ 0.262050] AppArmor: AppArmor Filesystem Enabled
[ 0.262095] pnp: PnP ACPI init
[ 0.262120] ACPI: bus type pnp registered
[ 0.262224] pnp 00:00: [bus 00-ff]
[ 0.262227] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.262230] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.262233] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.262235] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.262238] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.262241] pnp 00:00: [mem 0xbff00000-0xfebfffff window]
[ 0.262338] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.262426] pnp 00:01: [io 0x0010-0x001f]
[ 0.262429] pnp 00:01: [io 0x0022-0x003f]
[ 0.262431] pnp 00:01: [io 0x0044-0x005f]
[ 0.262433] pnp 00:01: [io 0x0062-0x0063]
[ 0.262435] pnp 00:01: [io 0x0065-0x006f]
[ 0.262437] pnp 00:01: [io 0x0074-0x007f]
[ 0.262439] pnp 00:01: [io 0x0091-0x0093]
[ 0.262441] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.262443] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.262445] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.262447] pnp 00:01: [io 0x0800-0x087f]
[ 0.262450] pnp 00:01: [io 0x0290-0x0297]
[ 0.262452] pnp 00:01: [io 0x0880-0x088f]
[ 0.262547] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.262551] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.262554] system 00:01: [io 0x0290-0x0297] has been reserved
[ 0.262557] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.262561] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.262575] pnp 00:02: [dma 4]
[ 0.262577] pnp 00:02: [io 0x0000-0x000f]
[ 0.262579] pnp 00:02: [io 0x0080-0x0090]
[ 0.262581] pnp 00:02: [io 0x0094-0x009f]
[ 0.262583] pnp 00:02: [io 0x00c0-0x00df]
[ 0.262623] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.262681] pnp 00:03: [irq 0 disabled]
[ 0.262694] pnp 00:03: [irq 8]
[ 0.262696] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.262741] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.262771] pnp 00:04: [io 0x0070-0x0073]
[ 0.262810] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.262821] pnp 00:05: [io 0x0061]
[ 0.262859] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.262869] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.262876] pnp 00:06: [irq 13]
[ 0.262914] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.263067] pnp 00:07: [io 0x03f0-0x03f5]
[ 0.263070] pnp 00:07: [io 0x03f7]
[ 0.263077] pnp 00:07: [irq 6]
[ 0.263079] pnp 00:07: [dma 2]
[ 0.263147] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[ 0.263336] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.263348] pnp 00:08: [irq 4]
[ 0.263429] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.263630] pnp 00:09: [io 0x02f8-0x02ff]
[ 0.263637] pnp 00:09: [irq 3]
[ 0.263714] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.263846] pnp 00:0a: [io 0x0400-0x04bf]
[ 0.263922] system 00:0a: [io 0x0400-0x04bf] has been reserved
[ 0.263927] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.263948] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
[ 0.263989] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.264221] pnp 00:0c: [mem 0xe0000000-0xefffffff]
[ 0.264321] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.264325] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264396] pnp 00:0d: [mem 0x000f0000-0x000fffff]
[ 0.264399] pnp 00:0d: [mem 0xbff00000-0xbfffffff]
[ 0.264401] pnp 00:0d: [mem 0xfed00000-0xfed000ff]
[ 0.264403] pnp 00:0d: [mem 0xbfe90000-0xbfefffff]
[ 0.264405] pnp 00:0d: [mem 0x00000000-0x0009ffff]
[ 0.264408] pnp 00:0d: [mem 0x00100000-0xbfe8ffff]
[ 0.264410] pnp 00:0d: [mem 0xfec00000-0xfec00fff]
[ 0.264412] pnp 00:0d: [mem 0xfed13000-0xfed1ffff]
[ 0.264415] pnp 00:0d: [mem 0xfed20000-0xfed9ffff]
[ 0.264417] pnp 00:0d: [mem 0xfee00000-0xfee00fff]
[ 0.264419] pnp 00:0d: [mem 0xffb00000-0xffb7ffff]
[ 0.264421] pnp 00:0d: [mem 0xfff00000-0xffffffff]
[ 0.264424] pnp 00:0d: [mem 0x000e0000-0x000effff]
[ 0.264520] system 00:0d: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.264524] system 00:0d: [mem 0xbff00000-0xbfffffff] has been reserved
[ 0.264527] system 00:0d: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.264531] system 00:0d: [mem 0xbfe90000-0xbfefffff] could not be reserved
[ 0.264534] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.264537] system 00:0d: [mem 0x00100000-0xbfe8ffff] could not be reserved
[ 0.264540] system 00:0d: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.264544] system 00:0d: [mem 0xfed13000-0xfed1ffff] has been reserved
[ 0.264546] system 00:0d: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.264550] system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.264553] system 00:0d: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.264556] system 00:0d: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.264559] system 00:0d: [mem 0x000e0000-0x000effff] has been reserved
[ 0.264563] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.264573] pnp: PnP ACPI: found 14 devices
[ 0.264576] ACPI: ACPI bus type pnp unregistered
[ 0.271301] PCI: max bus depth: 1 pci_try_num: 2
[ 0.271372] pci 0000:01:00.0: BAR 6: assigned [mem 0xfda00000-0xfda1ffff pref]
[ 0.271376] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.271379] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
[ 0.271384] pci 0000:00:01.0: bridge window [mem 0xfda00000-0xfdafffff]
[ 0.271388] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271395] pci 0000:02:00.0: BAR 6: assigned [mem 0xfd700000-0xfd71ffff pref]
[ 0.271398] pci 0000:00:06.0: PCI bridge to [bus 02-02]
[ 0.271401] pci 0000:00:06.0: bridge window [io 0xb000-0xbfff]
[ 0.271405] pci 0000:00:06.0: bridge window [mem 0xfd700000-0xfd7fffff]
[ 0.271409] pci 0000:00:06.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.271415] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.271418] pci 0000:00:1c.0: bridge window [io 0x9000-0x9fff]
[ 0.271423] pci 0000:00:1c.0: bridge window [mem 0xfd600000-0xfd6fffff]
[ 0.271428] pci 0000:00:1c.0: bridge window [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.271435] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.271439] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
[ 0.271444] pci 0000:00:1c.4: bridge window [mem 0xfde00000-0xfdefffff]
[ 0.271449] pci 0000:00:1c.4: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.271457] pci 0000:05:00.0: BAR 6: assigned [mem 0xfdb00000-0xfdb1ffff pref]
[ 0.271460] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[ 0.271463] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
[ 0.271468] pci 0000:00:1c.5: bridge window [mem 0xfdc00000-0xfdcfffff]
[ 0.271472] pci 0000:00:1c.5: bridge window [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.271479] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.271482] pci 0000:00:1e.0: bridge window [io 0x8000-0x8fff]
[ 0.271488] pci 0000:00:1e.0: bridge window [mem 0xfd900000-0xfd9fffff]
[ 0.271492] pci 0000:00:1e.0: bridge window [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.271520] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.271525] pci 0000:00:01.0: setting latency timer to 64
[ 0.271531] pci 0000:00:06.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.271535] pci 0000:00:06.0: setting latency timer to 64
[ 0.271543] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.271548] pci 0000:00:1c.0: setting latency timer to 64
[ 0.271555] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.271560] pci 0000:00:1c.4: setting latency timer to 64
[ 0.271570] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.271575] pci 0000:00:1c.5: setting latency timer to 64
[ 0.271582] pci 0000:00:1e.0: setting latency timer to 64
[ 0.271587] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.271590] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.271592] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.271595] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.271598] pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.271601] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
[ 0.271604] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdafffff]
[ 0.271608] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.271612] pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
[ 0.271615] pci_bus 0000:02: resource 1 [mem 0xfd700000-0xfd7fffff]
[ 0.271619] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.271623] pci_bus 0000:03: resource 0 [io 0x9000-0x9fff]
[ 0.271626] pci_bus 0000:03: resource 1 [mem 0xfd600000-0xfd6fffff]
[ 0.271630] pci_bus 0000:03: resource 2 [mem 0xfd500000-0xfd5fffff 64bit pref]
[ 0.271634] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.271637] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfdefffff]
[ 0.271641] pci_bus 0000:04: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]
[ 0.271645] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff]
[ 0.271648] pci_bus 0000:05: resource 1 [mem 0xfdc00000-0xfdcfffff]
[ 0.271652] pci_bus 0000:05: resource 2 [mem 0xfdb00000-0xfdbfffff 64bit pref]
[ 0.271656] pci_bus 0000:06: resource 0 [io 0x8000-0x8fff]
[ 0.271659] pci_bus 0000:06: resource 1 [mem 0xfd900000-0xfd9fffff]
[ 0.271663] pci_bus 0000:06: resource 2 [mem 0xfd800000-0xfd8fffff 64bit pref]
[ 0.271667] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7]
[ 0.271670] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff]
[ 0.271674] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.271677] pci_bus 0000:06: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.271681] pci_bus 0000:06: resource 8 [mem 0xbff00000-0xfebfffff]
[ 0.271739] NET: Registered protocol family 2
[ 0.271927] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.273551] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.280510] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.281325] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.281330] TCP reno registered
[ 0.281365] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.281462] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.281690] NET: Registered protocol family 1
[ 0.281727] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.281745] pci 0000:00:1a.0: PCI INT A disabled
[ 0.281766] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.281782] pci 0000:00:1a.1: PCI INT B disabled
[ 0.281796] pci 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.281813] pci 0000:00:1a.2: PCI INT D disabled
[ 0.281827] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.281872] pci 0000:00:1a.7: PCI INT C disabled
[ 0.281893] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.281910] pci 0000:00:1d.0: PCI INT A disabled
[ 0.281918] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.281935] pci 0000:00:1d.1: PCI INT B disabled
[ 0.281943] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.281959] pci 0000:00:1d.2: PCI INT C disabled
[ 0.281969] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.281984] pci 0000:00:1d.7: PCI INT A disabled
[ 0.282000] pci 0000:01:00.0: Boot video device
[ 0.282019] PCI: CLS 64 bytes, default 64
[ 0.282451] audit: initializing netlink socket (disabled)
[ 0.282463] type=2000 audit(1338155653.276:1): initialized
[ 0.317267] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.340507] VFS: Disk quotas dquot_6.5.2
[ 0.340582] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.341223] fuse init (API version 7.17)
[ 0.341338] msgmni has been set to 5983
[ 0.341746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.341781] io scheduler noop registered
[ 0.341783] io scheduler deadline registered
[ 0.341833] io scheduler cfq registered (default)
[ 0.341975] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.342014] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.342071] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.342101] pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
[ 0.342159] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.342199] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 0.342263] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.342302] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.342365] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.342405] pcieport 0000:00:1c.5: irq 44 for MSI/MSI-X
[ 0.342497] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.342528] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.342599] intel_idle: MWAIT substates: 0x220
[ 0.342601] intel_idle: does not run on family 6 model 15
[ 0.342696] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.342702] ACPI: Power Button [PWRB]
[ 0.342774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.342778] ACPI: Power Button [PWRF]
[ 0.342839] ACPI: Fan [FAN] (on)
[ 0.344634] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.344638] ACPI: Thermal Zone [THRM] (37 C)
[ 0.344689] ERST: Table is not found!
[ 0.344691] GHES: HEST is not enabled!
[ 0.344809] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.365211] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.408396] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.501376] Freeing initrd memory: 13896k freed
[ 0.588718] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.624477] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.640419] Linux agpgart interface v0.103
[ 0.642352] brd: module loaded
[ 0.643289] loop: module loaded
[ 0.643486] ahci 0000:00:1f.2: version 3.0
[ 0.643502] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.643554] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 0.643608] ahci: SSS flag set, parallel bus scan disabled
[ 0.643644] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.643648] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems
[ 0.643653] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.680781] scsi0 : ahci
[ 0.680915] scsi1 : ahci
[ 0.681010] scsi2 : ahci
[ 0.681101] scsi3 : ahci
[ 0.681187] scsi4 : ahci
[ 0.681276] scsi5 : ahci
[ 0.681441] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 45
[ 0.681445] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 45
[ 0.681449] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 45
[ 0.681452] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 45
[ 0.681455] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 45
[ 0.681458] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 45
[ 0.681547] ahci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.696063] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.696071] ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.696080] ahci 0000:04:00.0: setting latency timer to 64
[ 0.696539] scsi6 : ahci
[ 0.696637] scsi7 : ahci
[ 0.696699] ata7: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 16
[ 0.696703] ata8: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe180 irq 16
[ 0.696838] pata_acpi 0000:04:00.1: enabling device (0000 -> 0001)
[ 0.696846] pata_acpi 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.696884] pata_acpi 0000:04:00.1: setting latency timer to 64
[ 0.696901] pata_acpi 0000:04:00.1: PCI INT B disabled
[ 0.697265] Fixed MDIO Bus: probed
[ 0.697289] tun: Universal TUN/TAP device driver, 1.6
[ 0.697291] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.697381] PPP generic driver version 2.4.2
[ 0.697516] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.697538] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.697559] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.697563] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.697611] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.701524] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 0.701546] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
[ 0.716028] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.716237] hub 1-0:1.0: USB hub found
[ 0.716242] hub 1-0:1.0: 6 ports detected
[ 0.716333] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.716348] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.716352] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.716405] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.720325] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.720345] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
[ 0.736035] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.736218] hub 2-0:1.0: USB hub found
[ 0.736223] hub 2-0:1.0: 6 ports detected
[ 0.736315] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.736333] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.736357] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.736366] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.736369] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.736434] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.736460] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
[ 0.736609] hub 3-0:1.0: USB hub found
[ 0.736614] hub 3-0:1.0: 2 ports detected
[ 0.736691] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.736699] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.736702] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.736759] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.736793] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
[ 0.736948] hub 4-0:1.0: USB hub found
[ 0.736954] hub 4-0:1.0: 2 ports detected
[ 0.737029] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.737038] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.737041] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.737111] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.737144] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000fd00
[ 0.737290] hub 5-0:1.0: USB hub found
[ 0.737295] hub 5-0:1.0: 2 ports detected
[ 0.737371] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.737379] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.737383] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.737438] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.737461] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fc00
[ 0.737609] hub 6-0:1.0: USB hub found
[ 0.737614] hub 6-0:1.0: 2 ports detected
[ 0.737690] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.737697] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.737701] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.737755] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.737779] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fb00
[ 0.737920] hub 7-0:1.0: USB hub found
[ 0.737925] hub 7-0:1.0: 2 ports detected
[ 0.738000] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.738007] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.738011] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.738066] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.738091] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fa00
[ 0.738237] hub 8-0:1.0: USB hub found
[ 0.738242] hub 8-0:1.0: 2 ports detected
[ 0.738385] usbcore: registered new interface driver libusual
[ 0.738434] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.738801] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.738810] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.738978] mousedev: PS/2 mouse device common for all mice
[ 0.739137] rtc_cmos 00:04: RTC can wake from S4
[ 0.739258] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.739284] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.739385] device-mapper: uevent: version 1.0.3
[ 0.739465] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 0.739474] cpuidle: using governor ladder
[ 0.739476] cpuidle: using governor menu
[ 0.739478] EFI Variables Facility v0.08 2004-May-17
[ 0.739752] TCP cubic registered
[ 0.739875] NET: Registered protocol family 10
[ 0.740435] NET: Registered protocol family 17
[ 0.740456] Registering the dns_resolver key type
[ 0.740614] PM: Hibernation image not present or could not be loaded.
[ 0.740629] registered taskstats version 1
[ 0.758922] Magic number: 12:143:956
[ 0.759063] rtc_cmos 00:04: setting system clock to 2012-05-27 21:54:14 UTC (1338155654)
[ 0.759358] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.759360] EDD information not available.
[ 1.000040] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.016071] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.140024] usb 1-3: new high-speed USB device number 3 using ehci_hcd
[ 1.188070] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.188608] ata7.00: HPA detected: current 234175402, native 234441648
[ 1.188616] ata7.00: ATA-7: WDC WD1200JS-00MHB0, 02.01C03, max UDMA/133
[ 1.188621] ata7.00: 234175402 sectors, multi 0: LBA48
[ 1.189238] ata7.00: configured for UDMA/133
[ 1.280052] Refined TSC clocksource calibration: 1995.596 MHz.
[ 1.280060] Switching to clocksource tsc
[ 1.396028] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 1.492033] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.493653] ata2.00: ATAPI: Optiarc DVD RW AD-7261S, 1.03, max UDMA/100
[ 1.495564] ata2.00: configured for UDMA/100
[ 1.497111] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7261S 1.03 PQ: 0 ANSI: 5
[ 1.498719] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.498724] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.498907] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.498991] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.529782] hub 1-5:1.0: USB hub found
[ 1.530096] hub 1-5:1.0: 4 ports detected
[ 1.640021] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[ 1.773906] hub 1-6:1.0: USB hub found
[ 1.774222] hub 1-6:1.0: 4 ports detected
[ 1.816036] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.884077] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.023022] Initializing USB Mass Storage driver...
[ 2.023219] scsi8 : usb-storage 2-1:1.5
[ 2.023301] usbcore: registered new interface driver usb-storage
[ 2.023303] USB Mass Storage support registered.
[ 2.308032] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.309072] ata4.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
[ 2.309078] ata4.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 2.310208] ata4.00: configured for UDMA/133
[ 2.310366] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
[ 2.310559] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.310591] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.310619] sd 3:0:0:0: [sda] Write Protect is off
[ 2.310622] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.310658] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.365644] sda: sda1 sda2 < sda5 sda6 > sda3 sda4
[ 2.366184] sd 3:0:0:0: [sda] Attached SCSI disk
[ 2.484024] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.628033] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.649553] hub 3-1:1.0: USB hub found
[ 2.651506] hub 3-1:1.0: 4 ports detected
[ 2.896026] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 3.020679] scsi 8:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2
[ 3.021211] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 3.023158] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 3.089821] usb 7-1: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[ 3.120037] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.120638] ata6.00: ATA-7: WDC WD1600JS-00NCB1, 10.02E02, max UDMA/133
[ 3.120644] ata6.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 3.121322] ata6.00: configured for UDMA/133
[ 3.121420] scsi 5:0:0:0: Direct-Access ATA WDC WD1600JS-00N 10.0 PQ: 0 ANSI: 5
[ 3.121554] sd 5:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 3.121590] sd 5:0:0:0: Attached scsi generic sg3 type 0
[ 3.121615] sd 5:0:0:0: [sdc] Write Protect is off
[ 3.121619] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 3.121645] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.121725] scsi 6:0:0:0: Direct-Access ATA WDC WD1200JS-00M 02.0 PQ: 0 ANSI: 5
[ 3.121903] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 3.121952] sd 6:0:0:0: [sdd] 234175402 512-byte logical blocks: (119 GB/111 GiB)
[ 3.122032] sd 6:0:0:0: [sdd] Write Protect is off
[ 3.122036] sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 3.122068] sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.139383] sdd: sdd1
[ 3.139744] sd 6:0:0:0: [sdd] Attached SCSI disk
[ 3.155136] sdc: sdc1 sdc2 < sdc5 > sdc3
[ 3.155587] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 3.157423] Freeing unused kernel memory: 920k freed
[ 3.157710] Write protecting the kernel read-only data: 12288k
[ 3.163925] Freeing unused kernel memory: 1608k freed
[ 3.169235] Freeing unused kernel memory: 1196k freed
[ 3.208410] udevd[121]: starting version 175
[ 3.276502] Btrfs loaded
[ 3.375865] FDC 0 is a post-1991 82077
[ 3.376079] usb 7-2: new low-speed USB device number 3 using uhci_hcd
[ 3.383550] sky2: driver version 1.30
[ 3.383603] sky2 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.383619] sky2 0000:05:00.0: setting latency timer to 64
[ 3.383658] sky2 0000:05:00.0: Yukon-2 EC chip revision 2
[ 3.383751] sky2 0000:05:00.0: irq 46 for MSI/MSI-X
[ 3.388917] sky2 0000:05:00.0: eth0: addr 00:01:29:a6:a1:46
[ 3.423561] input: HID 03d9:0499 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input2
[ 3.423762] generic-usb 0003:03D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 03d9:0499] on usb-0000:00:1d.1-1/input0
[ 3.423787] usbcore: registered new interface driver usbhid
[ 3.423789] usbhid: USB HID core driver
[ 3.441160] pata_jmicron 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 3.441204] pata_jmicron 0000:04:00.1: setting latency timer to 64
[ 3.442444] scsi9 : pata_jmicron
[ 3.442709] scsi10 : pata_jmicron
[ 3.442857] ata9: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 17
[ 3.442860] ata10: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 17
[ 3.534923] device label linuxhome devid 1 transid 6252 /dev/sdc5
[ 3.604642] ata9.00: ATAPI: _NEC DVD_RW ND-3520AW, 3.05, max UDMA/33
[ 3.607001] input: HID 13ec:000a as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input3
[ 3.607171] generic-usb 0003:13EC:000A.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 13ec:000a] on usb-0000:00:1d.1-2/input0
[ 3.620670] ata9.00: configured for UDMA/33
[ 3.622124] scsi 9:0:0:0: CD-ROM _NEC DVD_RW ND-3520AW 3.05 PQ: 0 ANSI: 5
[ 3.623723] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 3.623934] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 3.624186] sr 9:0:0:0: Attached scsi generic sg5 type 5
[ 3.647945] input: HID 13ec:000a as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input4
[ 3.648084] generic-usb 0003:13EC:000A.0003: input,hidraw2: USB HID v1.10 Device [HID 13ec:000a] on usb-0000:00:1d.1-2/input1
[ 3.944042] usb 8-1: new full-speed USB device number 2 using uhci_hcd
[ 4.192365] usb 1-5.2: new full-speed USB device number 6 using ehci_hcd
[ 4.364367] usb 1-6.1: new high-speed USB device number 7 using ehci_hcd
[ 4.478140] scsi11 : usb-storage 1-6.1:1.0
[ 4.548353] usb 1-6.2: new low-speed USB device number 8 using ehci_hcd
[ 4.716366] usb 1-6.4: new full-speed USB device number 9 using ehci_hcd
[ 4.810840] input: Thrustmaster T Mini as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.4/1-6.4:1.0/input/input5
[ 4.811140] generic-usb 0003:044F:D001.0005: input,hidraw3: USB HID v1.00 Joystick [Thrustmaster T Mini] on usb-0000:00:1a.7-6.4/input0
[ 4.885519] usb 3-1.1: new low-speed USB device number 3 using uhci_hcd
[ 5.036871] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.0/input/input6
[ 5.036988] generic-usb 0003:046D:C221.0006: input,hidraw4: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1a.0-1.1/input0
[ 5.071619] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/3-1.1:1.1/input/input7
[ 5.071808] generic-usb 0003:046D:C221.0007: input,hiddev0,hidraw5: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1a.0-1.1/input1
[ 5.145518] usb 3-1.3: new full-speed USB device number 4 using uhci_hcd
[ 5.281869] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input8
[ 5.281985] generic-usb 0003:045E:0745.0008: input,hidraw6: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.3/input0
[ 5.289448] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.1/input/input9
[ 5.289604] generic-usb 0003:045E:0745.0009: input,hidraw7: USB HID v1.11 Mouse [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.3/input1
[ 5.314776] input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0 as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.2/input/input10
[ 5.314943] generic-usb 0003:045E:0745.000A: input,hiddev0,hidraw8: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae 2.4GHz Transceiver v7.0] on usb-0000:00:1a.0-1.3/input2
[ 5.389509] usb 3-1.4: new full-speed USB device number 5 using uhci_hcd
[ 5.479759] scsi 11:0:0:0: Direct-Access WDC WD25 00BEVS-22VAT0 PQ: 0 ANSI: 2
[ 5.480438] sd 11:0:0:0: Attached scsi generic sg6 type 0
[ 5.481744] sd 11:0:0:0: [sde] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 5.483986] sd 11:0:0:0: [sde] Write Protect is off
[ 5.483998] sd 11:0:0:0: [sde] Mode Sense: 38 00 00 00
[ 5.486234] sd 11:0:0:0: [sde] No Caching mode page present
[ 5.486239] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5.491859] sd 11:0:0:0: [sde] No Caching mode page present
[ 5.491871] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 5.529668] input: G11 Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input11
[ 5.529834] generic-usb 0003:046D:C225.000B: input,hiddev0,hidraw9: USB HID v1.11 Keypad [G11 Keyboard] on usb-0000:00:1a.0-1.4/input0
[ 6.218061] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 7.665025] sde: sde1 sde2
[ 7.670859] sd 11:0:0:0: [sde] No Caching mode page present
[ 7.670865] sd 11:0:0:0: [sde] Assuming drive cache: write through
[ 7.670874] sd 11:0:0:0: [sde] Attached SCSI disk
[ 13.322344] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.412496] udevd[399]: starting version 175
[ 13.658257] Adding 1754108k swap on /dev/sdc1. Priority:-1 extents:1 across:1754108k
[ 13.740119] lp: driver loaded but no devices found
[ 13.944772] Bluetooth: Core ver 2.16
[ 13.944840] NET: Registered protocol family 31
[ 13.944843] Bluetooth: HCI device and connection manager initialized
[ 13.944848] Bluetooth: HCI socket layer initialized
[ 13.944851] Bluetooth: L2CAP socket layer initialized
[ 13.944861] Bluetooth: SCO socket layer initialized
[ 13.976255] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 13.982148] usbcore: registered new interface driver btusb
[ 14.548890] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 14.548896] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 14.548899] Disabling lock debugging due to kernel taint
[ 14.653609] [fglrx] Maximum main memory to use for locked dma buffers: 2863 MBytes.
[ 14.654015] [fglrx] vendor: 1002 device: 9498 count: 1
[ 14.654019] [fglrx] vendor: 1002 device: 9498 count: 2
[ 14.654923] [fglrx] ioport: bar 4, base 0xae00, size: 0x100
[ 14.654939] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.654945] pci 0000:01:00.0: setting latency timer to 64
[ 14.654987] [fglrx] ioport: bar 4, base 0xbe00, size: 0x100
[ 14.654995] pci 0000:02:00.0: enabling device (0000 -> 0003)
[ 14.655000] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.655006] pci 0000:02:00.0: setting latency timer to 64
[ 14.655516] [fglrx] Kernel PAT support is enabled
[ 14.655550] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 2 minors
[ 14.939753] input: DragonRise Inc. Generic USB Joystick as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6.2/1-6.2:1.0/input/input12
[ 14.940408] dragonrise 0003:0079:0006.0004: input,hidraw10: USB HID v1.10 Joystick [DragonRise Inc. Generic USB Joystick ] on usb-0000:00:1a.7-6.2/input0
[ 14.940450] dragonrise 0003:0079:0006.0004: Force Feedback for DragonRise Inc. game controllers by Richard Walmsley <richwalm@gmail.com>
[ 15.054383] type=1400 audit(1338144868.789:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=710 comm="apparmor_parser"
[ 15.054396] type=1400 audit(1338144868.789:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=694 comm="apparmor_parser"
[ 15.054899] type=1400 audit(1338144868.789:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=710 comm="apparmor_parser"
[ 15.054909] type=1400 audit(1338144868.789:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=694 comm="apparmor_parser"
[ 15.055180] type=1400 audit(1338144868.789:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=710 comm="apparmor_parser"
[ 15.055192] type=1400 audit(1338144868.789:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=694 comm="apparmor_parser"
[ 15.188963] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.189027] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 15.189055] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 15.257881] hda_codec: ALC889A: BIOS auto-probing.
[ 15.269004] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 15.269231] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 15.269419] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 15.269624] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 15.269808] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 15.269984] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 15.270238] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[ 15.270427] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[ 15.271981] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.272085] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X
[ 15.272116] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 15.319173] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 15.319444] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input21
[ 15.319940] snd_hda_intel 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.320056] snd_hda_intel 0000:02:00.1: irq 49 for MSI/MSI-X
[ 15.320088] snd_hda_intel 0000:02:00.1: setting latency timer to 64
[ 15.340597] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 15.340710] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:06.0/0000:02:00.1/sound/card2/input22
[ 15.880997] vesafb: mode is 1024x768x16, linelength=2048, pages=0
[ 15.881001] vesafb: scrolling: redraw
[ 15.881004] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 15.881889] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011180000, using 1536k, total 1536k
[ 15.882092] Console: switching to colour frame buffer device 128x48
[ 15.882115] fb0: VESA VGA frame buffer device
[ 16.168252] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro
[ 75.716757] device label linuxhome devid 1 transid 6252 /dev/sdc5
[ 75.716928] btrfs: disk space caching is enabled
[ 76.378285] device label linuxhome devid 1 transid 6252 /dev/sdc5
[ 78.026905] init: failsafe main process (1056) killed by TERM signal
[ 78.871891] ppdev: user-space parallel port driver
[ 79.110809] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 79.110813] Bluetooth: BNEP filters: protocol multicast
[ 79.133578] type=1400 audit(1338144932.869:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1119 comm="apparmor_parser"
[ 79.134158] type=1400 audit(1338144932.869:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1119 comm="apparmor_parser"
[ 79.189202] Bluetooth: RFCOMM TTY layer initialized
[ 79.189209] Bluetooth: RFCOMM socket layer initialized
[ 79.189211] Bluetooth: RFCOMM ver 1.11
[ 79.620658] sky2 0000:05:00.0: eth0: enabling interface
[ 79.621440] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 79.622085] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 79.885313] type=1400 audit(1338144933.621:10): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1176 comm="apparmor_parser"
[ 79.885800] type=1400 audit(1338144933.621:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1176 comm="apparmor_parser"
[ 79.886068] type=1400 audit(1338144933.621:12): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1176 comm="apparmor_parser"
[ 79.931599] type=1400 audit(1338144933.665:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1175 comm="apparmor_parser"
[ 79.941046] type=1400 audit(1338144933.677:14): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1183 comm="apparmor_parser"
[ 79.941625] type=1400 audit(1338144933.677:15): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1183 comm="apparmor_parser"
[ 79.946387] type=1400 audit(1338144933.681:16): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1184 comm="apparmor_parser"
[ 79.947023] type=1400 audit(1338144933.681:17): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1184 comm="apparmor_parser"
[ 81.427591] sky2 0000:05:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control rx
[ 81.428101] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 82.376930] vgaarb: this pci device is not a vga device
[ 82.376948] vgaarb: this pci device is not a vga device
[ 82.376961] vgaarb: this pci device is not a vga device
[ 82.376975] vgaarb: this pci device is not a vga device
[ 82.376989] vgaarb: this pci device is not a vga device
[ 82.377002] vgaarb: this pci device is not a vga device
[ 82.377015] vgaarb: this pci device is not a vga device
[ 82.377028] vgaarb: this pci device is not a vga device
[ 82.377041] vgaarb: this pci device is not a vga device
[ 82.377057] vgaarb: this pci device is not a vga device
[ 82.377070] vgaarb: this pci device is not a vga device
[ 82.377083] vgaarb: this pci device is not a vga device
[ 82.377096] vgaarb: this pci device is not a vga device
[ 82.377110] vgaarb: this pci device is not a vga device
[ 82.377123] vgaarb: this pci device is not a vga device
[ 82.377136] vgaarb: this pci device is not a vga device
[ 82.377150] vgaarb: this pci device is not a vga device
[ 82.377163] vgaarb: this pci device is not a vga device
[ 82.377177] vgaarb: this pci device is not a vga device
[ 82.377205] vgaarb: this pci device is not a vga device
[ 82.377230] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 82.377253] vgaarb: this pci device is not a vga device
[ 82.377269] vgaarb: this pci device is not a vga device
[ 82.377285] vgaarb: this pci device is not a vga device
[ 82.377301] vgaarb: this pci device is not a vga device
[ 82.713977] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X
[ 82.714908] [fglrx] Firegl kernel thread PID: 1360
[ 82.715068] [fglrx] Firegl kernel thread PID: 1361
[ 82.715165] [fglrx] Firegl kernel thread PID: 1362
[ 82.715333] [fglrx] IRQ 50 Enabled
[ 82.747315] fglrx_pci 0000:02:00.0: irq 51 for MSI/MSI-X
[ 82.749211] [fglrx] Firegl kernel thread PID: 1375
[ 82.749485] [fglrx] Firegl kernel thread PID: 1377
[ 82.749597] [fglrx] Firegl kernel thread PID: 1378
[ 82.749807] [fglrx] IRQ 51 Enabled
[ 84.312619] [fglrx] Gart USWC size:940 M.
[ 84.312623] [fglrx] Gart cacheable size:372 M.
[ 84.312629] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 84.312632] [fglrx] Reserved FB block: Unshared offset:fc8c000, size:374000
[ 84.312635] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[ 92.848022] eth0: no IPv6 routers present
[ 95.557860] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 95.571365] ISOFS: changing to secondary root

[dancer_69]

Εγκατέστησε το

Κώδικας: Επιλογή όλων

linux-firmware-nonfree

κάνε επανεκκίνηση και δώσε μας το

Κώδικας: Επιλογή όλων

dmesg

το tuner σου θέλει το firmware Conexant cx231xx USB το οποίο υπάρχει εδώ http://linuxtv.org/downloads/firmware/#3

Αυτό το firmware είναι ήδη εγκατεστημένο στο /lib/hardware, δυστυχώς δε φτάνει αυτό από μόνο του.

[Learner]

Άνοιξε ένα τερματικό και γράψε την παρακάτω εντολή ..

Κώδικας: Επιλογή όλων

tail -f /var/log/kern.log

αποσύνδεσε το Tv Tuner και σύνδεσε το ξανά..
Όταν το συνδέσεις τι μηνύματα γράφει ;

[the_eye]

Για δοκίμασε να εγκαταστήσεις το

Κώδικας: Επιλογή όλων

ivtv

[dancer_69]

Άνοιξε ένα τερματικό και γράψε την παρακάτω εντολή ..

Κώδικας: Επιλογή όλων

tail -f /var/log/kern.log

αποσύνδεσε το Tv Tuner και σύνδεσε το ξανά..
Όταν το συνδέσεις τι μηνύματα γράφει ;

Μόνο αυτό:

Κώδικας: Επιλογή όλων

usb 1-3: new high-speed USB device number 10 using ehci_hcd

Πάντως το firmware που χρειάζεται είναι το v4l-cx28540.fw. Υπάρχει ήδη στο /lib/firmware αλλά το επιβεβαίωσα με τη χρήση ενός προγράμματος που το εξάγει από τους οδηγούς των windows.
Είναι πιθανόν να μπορεί να προστεθεί στα sources του LinuxTV project, μιας και υπάρχει οδηγός για το cx28540, αλλά οι πληροφορίες που δίνει για το πως μπορεί να γίνει αυτό είναι πολύ συνοπτικές. Και επίσης τα αρχεία που λέει ότι χρειάζεται να πειραχθούν, δεν υπάρχουν για το συγκεκριμένο οδηγό.

[the_eye]

Λείπει κάποιο module για το cx231XX αν βρεις το module, αυτό θα φορτώσει το firmware.

[Learner]

Και στην lsusb στο εμφανίζει σαν Afatech ?

Κώδικας: Επιλογή όλων

watch lsusb

αποσυνδέεις και συνδέεις το Tv Tuner.

Το μήνυμα του πυρήνα πάντως , όπως βλέπεις , είναι ένα απλό usb . Δεν έχει αναγνωρίσει κάρτα Tv Tuner.
Ίσως φταίει το firmware ,που λέει και ο the_eye , πως πρέπει να φορτωθεί.
Ίσως αν αλλάξεις id να γίνει κάτι ; δεν είμαι σίγουρος.