Πρόβλημα με usb tv-tuner

[logari81]

όχι η εντολη ειναι απολυτως ασφαλής

[makbisk]

Στην προηγούμενη σελίδα τα αποτελέσματα της εντολής logari81

[Hephaestus]

Η δημοσίευση διαγράφηκε.

[makbisk]

Hephaestus Φίλε μου το νούμερο 17 έκανε παιχνίδι,στα αλλα νούμερα τσίφος ή δουλειά,τα δοκίμασα πολλές φορές πριν.Δεν έχει νούμερο το όνομα της εταιρίας μόνο.

[logari81]

για δοκίμασε να τρεξεις:

Κώδικας: Επιλογή όλων

tvtime & aplay /dev/dsp1

[makbisk]

Έτρεξα την εντολή και άνοιξε πρόγραμμα(έπαιζε κανονικά, ο ήχος ακουγόταν ένα πράγμα σαν βρόγχος) το τερματικό έβγαλε αυτά
$ tvtime & aplay /dev/dsp1
[1] 8630
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/biskos/.tvtime/tvtime.xml
Playing raw data '/dev/dsp1' : Unsigned 8 bit, Rate 8000 Hz, Mono
underrun!!! (at least 764,179 ms long)
πείραζα ρυθμίσεις προγράμματος(europe ζώνη,pal/bg ήχος),
στον κεντρικό ήχο του ubuntu έχω HDA intel (alsa mixer).

[logari81]

για δωσε μας το αποτελεσμα του

Κώδικας: Επιλογή όλων

dmesg

παλι, μηπως εχει κατι χρησιμο

[logari81]

Φίλε logari81 ιδου τα αποτελέσματα

Κώδικας: Επιλογή όλων

[ 1.212692] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.212721] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.212742] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[ 1.212750] pci_express 0000:00:01.0:pcie00: allocate port service
[ 1.212764] pci_express 0000:00:01.0:pcie03: allocate port service
[ 1.212803] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.212831] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.212851] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[ 1.212861] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 1.212873] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 1.212884] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 1.212942] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.213086] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.213601] ACPI: AC Adapter [AC0] (on-line)
[ 1.260691] ACPI: Battery Slot [BAT0] (battery present)
[ 1.260757] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.260759] ACPI: Power Button (FF) [PWRF]
[ 1.260807] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.260842] ACPI: Lid Switch [LID]
[ 1.260882] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 1.260885] ACPI: Sleep Button (CM) [SLPB]
[ 1.260922] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 1.260924] ACPI: Power Button (CM) [PWRB]
[ 1.261316] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.261338] processor ACPI_CPU:00: registered as cooling_device0
[ 1.261342] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.265687] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.286003] ACPI: Thermal Zone [THRM] (79 C)
[ 1.286042] isapnp: Scanning for PnP cards...
[ 1.638933] isapnp: No Plug & Play device found
[ 1.639919] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.640852] brd: module loaded
[ 1.641134] loop: module loaded
[ 1.641191] Fixed MDIO Bus: probed
[ 1.641197] PPP generic driver version 2.4.2
[ 1.641251] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.641275] Driver 'sd' needs updating - please use bus_type methods
[ 1.641283] Driver 'sr' needs updating - please use bus_type methods
[ 1.641318] ahci 0000:00:1f.2: version 3.0
[ 1.641334] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.641343] ahci 0000:00:1f.2: PCI INT B disabled
[ 1.641347] ahci: probe of 0000:00:1f.2 failed with error -22
[ 1.641382] ata_piix 0000:00:1f.2: version 2.12
[ 1.641386] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.641390] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.641426] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.641505] scsi0 : ata_piix
[ 1.641578] scsi1 : ata_piix
[ 1.643118] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.643121] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.804316] ata1.00: ATA-7: SAMSUNG HM080JI, YC100-04, max UDMA7
[ 1.804319] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.820329] ata1.00: configured for UDMA/133
[ 1.984364] ata2.00: ATAPI: _NEC DVD+/-RW ND-6650A, 1.42, max UDMA/33
[ 2.000315] ata2.00: configured for UDMA/33
[ 2.010422] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM080JI YC10 PQ: 0 ANSI: 5
[ 2.010505] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.010521] sd 0:0:0:0: [sda] Write Protect is off
[ 2.010524] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.010546] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.010597] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors: (80.0 GB/74.5 GiB)
[ 2.010609] sd 0:0:0:0: [sda] Write Protect is off
[ 2.010611] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.010633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.010636] sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[ 2.172057] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.172095] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.179661] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6650A 1.42 PQ: 0 ANSI: 5
[ 2.205836] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 2.205840] Uniform CD-ROM driver Revision: 3.20
[ 2.205910] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.205942] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.206481] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.206498] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.206518] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.206521] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.206585] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.210477] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.210482] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.210496] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffeffc00
[ 2.224007] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.224079] usb usb1: configuration #1 chosen from 1 choice
[ 2.224104] hub 1-0:1.0: USB hub found
[ 2.224112] hub 1-0:1.0: 8 ports detected
[ 2.224215] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.224228] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.224248] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.224253] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.224256] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.224289] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.224310] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480
[ 2.224380] usb usb2: configuration #1 chosen from 1 choice
[ 2.224405] hub 2-0:1.0: USB hub found
[ 2.224412] hub 2-0:1.0: 2 ports detected
[ 2.224478] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.224483] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.224486] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.224520] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.224546] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 2.224611] usb usb3: configuration #1 chosen from 1 choice
[ 2.224633] hub 3-0:1.0: USB hub found
[ 2.224638] hub 3-0:1.0: 2 ports detected
[ 2.224708] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.224714] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.224716] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.224754] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.224780] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 2.224845] usb usb4: configuration #1 chosen from 1 choice
[ 2.224866] hub 4-0:1.0: USB hub found
[ 2.224872] hub 4-0:1.0: 2 ports detected
[ 2.224942] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.224947] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.224950] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.224991] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.225017] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 2.225086] usb usb5: configuration #1 chosen from 1 choice
[ 2.225108] hub 5-0:1.0: USB hub found
[ 2.225114] hub 5-0:1.0: 2 ports detected
[ 2.225232] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.229572] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 2.230445] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.230450] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.230453] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.230455] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.230457] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.230599] mice: PS/2 mouse device common for all mice
[ 2.230798] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 2.230822] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 2.230877] device-mapper: uevent: version 1.0.3
[ 2.230965] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 2.231005] device-mapper: multipath: version 1.0.5 loaded
[ 2.231008] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.231084] EISA: Probing bus 0 at eisa.0
[ 2.231109] EISA: Detected 0 cards.
[ 2.231168] cpuidle: using governor ladder
[ 2.231226] cpuidle: using governor menu
[ 2.231665] TCP cubic registered
[ 2.231754] NET: Registered protocol family 10
[ 2.232118] lo: Disabled Privacy Extensions
[ 2.232393] NET: Registered protocol family 17
[ 2.232411] Bluetooth: L2CAP ver 2.11
[ 2.232412] Bluetooth: L2CAP socket layer initialized
[ 2.232415] Bluetooth: SCO (Voice Link) ver 0.6
[ 2.232416] Bluetooth: SCO socket layer initialized
[ 2.232441] Bluetooth: RFCOMM socket layer initialized
[ 2.232449] Bluetooth: RFCOMM TTY layer initialized
[ 2.232450] Bluetooth: RFCOMM ver 1.10
[ 2.232688] Using IPI No-Shortcut mode
[ 2.232748] registered taskstats version 1
[ 2.232831] Magic number: 1:496:86
[ 2.232895] rtc_cmos 00:03: setting system clock to 2009-11-02 17:05:47 UTC (1257181547)
[ 2.232898] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.232900] EDD information not available.
[ 2.233160] Freeing unused kernel memory: 532k freed
[ 2.233262] Write protecting the kernel text: 4120k
[ 2.233298] Write protecting the kernel read-only data: 1524k
[ 2.235339] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.592031] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.727267] usb 1-3: configuration #1 chosen from 1 choice
[ 2.964013] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 3.066650] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 3.066683] 8139cp 0000:01:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 3.069433] 8139too Fast Ethernet driver 0.9.28
[ 3.069468] 8139too 0000:01:0c.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 3.070441] eth0: RealTek RTL8139 at 0xc800, 00:03:0d:35:97:97, IRQ 19
[ 3.070443] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 3.073518] ohci1394 0000:01:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.123268] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[ffcff000-ffcff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 3.183500] usb 2-1: configuration #1 chosen from 1 choice
[ 3.380597] usbcore: registered new interface driver hiddev
[ 3.382974] Marking TSC unstable due to TSC halts in idle
[ 3.398500] input: Logitech USB RECEIVER as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
[ 3.398712] generic-usb 0003:046D:C50E.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB RECEIVER] on usb-0000:00:1d.0-1/input0
[ 3.398728] usbcore: registered new interface driver usbhid
[ 3.398731] usbhid: v2.6:USB HID core driver
[ 3.850275] PM: Starting manual resume from disk
[ 3.850279] PM: Resume from partition 8:8
[ 3.850280] PM: Checking hibernation image.
[ 3.850514] PM: Resume from disk failed.
[ 3.852596] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.852598] EXT3-fs: write access will be enabled during recovery.
[ 4.400554] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4950e1d710]
[ 5.147768] kjournald starting. Commit interval 5 seconds
[ 5.147782] EXT3-fs: recovery complete.
[ 5.148217] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.266578] udev: starting version 141
[ 14.000796] Linux agpgart interface v0.103
[ 14.002251] intel_rng: FWH not detected
[ 14.106716] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 14.159458] ieee80211_crypt: registered algorithm 'NULL'
[ 14.163751] ieee80211: 802.11 data/management/control stack, git-1.1.13
[ 14.163754] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 14.322060] ACPI: Cant attach device<6>input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:18/device:19/input/input8
[ 14.331083] ACPI: Video Device [PEG] (multi-head: yes rom: no post: no)
[ 14.676226] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[ 14.785033] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 14.785037] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 14.785184] ipw2200 0000:01:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 14.785854] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 14.785903] ipw2200 0000:01:03.0: firmware: requesting ipw2200-bss.fw
[ 14.795078] iTCO_vendor_support: vendor-support=0
[ 14.797015] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[ 14.797134] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[ 14.797215] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.994822] ipw2200: Radio Frequency Kill Switch is On:
[ 14.994824] Kill switch must be turned off for wireless networking to work.
[ 15.007130] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 15.159190] Linux video capture interface: v2.00
[ 15.203639] em28xx v4l2 driver version 0.1.0 loaded
[ 15.204483] em28xx new video device (eb1a:2881): interface 0, class 255
[ 15.204488] em28xx Has usb audio class
[ 15.204490] em28xx #0: Alternate settings: 8
[ 15.204492] em28xx #0: Alternate setting 0, max size= 0
[ 15.204494] em28xx #0: Alternate setting 1, max size= 0
[ 15.204496] em28xx #0: Alternate setting 2, max size= 1448
[ 15.204498] em28xx #0: Alternate setting 3, max size= 2048
[ 15.204500] em28xx #0: Alternate setting 4, max size= 2304
[ 15.204502] em28xx #0: Alternate setting 5, max size= 2580
[ 15.204504] em28xx #0: Alternate setting 6, max size= 2892
[ 15.204506] em28xx #0: Alternate setting 7, max size= 3072
[ 15.204679] em28xx #0: chip ID is em2882/em2883
[ 15.376851] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.376983] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.397939] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 15.397948] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 15.397956] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 15.397965] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 15.397973] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.397981] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.397989] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 15.397997] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 15.398005] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 15.398013] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.398021] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.398029] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.398037] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.398045] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.398057] em28xx #0: i2c eeprom e0: 5a 00 55 aa 2b 14 57 03 00 17 d4 01 00 00 00 00
[ 15.398066] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 15.398075] EEPROM ID= 0x9567eb1a, hash = 0xa4c52420
[ 15.398077] Vendor/Product ID= eb1a:2881
[ 15.398078] AC97 audio (5 sample rates)
[ 15.398080] USB Remote wakeup capable
[ 15.398081] 500mA max power
[ 15.398083] Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 15.460073] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[ 15.564817] Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
[ 15.605603] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input9
[ 15.607618] xc2028 0-0061: creating new instance
[ 15.607621] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 15.607633] i2c-adapter i2c-0: firmware: requesting xc3028-v27.fw
[ 15.646073] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 15.704015] xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 16.601357] xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 16.615731] xc2028 0-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 16.892490] tvp5150 0-005c: tvp5150am1 detected.
[ 17.037379] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 17.037382] em28xx #0: Found Pinnacle PCTV HD Pro Stick
[ 17.037396] em28xx audio device (eb1a:2881): interface 1, class 1
[ 17.037405] em28xx audio device (eb1a:2881): interface 2, class 1
[ 17.037429] usbcore: registered new interface driver em28xx
[ 17.172415] usbcore: registered new interface driver snd-usb-audio
[ 17.329498] lgdt330x: i2c_read_demod_bytes: addr 0x0e select 0x02 error (ret == -19)
[ 17.329586] em28xx #0/2: dvb frontend not attached. Can't attach xc3028
[ 17.329591] Em28xx: Initialized (Em28xx dvb Extension) extension
[ 17.391147] lp: driver loaded but no devices found
[ 17.443483] Adding 497972k swap on /dev/sda8. Priority:-1 extents:1 across:497972k
[ 17.976143] EXT3 FS on sda7, internal journal
[ 18.552049] Clocksource tsc unstable (delta = -439271398 ns)
[ 18.987364] type=1505 audit(1257174364.251:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2095
[ 19.035565] type=1505 audit(1257174364.299:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2099
[ 19.035681] type=1505 audit(1257174364.299:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2099
[ 19.035727] type=1505 audit(1257174364.299:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2099
[ 19.035771] type=1505 audit(1257174364.299:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2099
[ 19.178083] type=1505 audit(1257174364.443:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2104
[ 19.178340] type=1505 audit(1257174364.443:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2104
[ 19.205821] type=1505 audit(1257174364.471:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2108
[ 21.296510] tvp5150 0-005c: tvp5150am1 detected.
[ 21.555874] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.555877] Bluetooth: BNEP filters: protocol multicast
[ 21.578055] Bridge firewalling registered
[ 22.581065] pci 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.915054] ppdev: user-space parallel port driver
[ 22.954466] [drm] Initialized drm 1.1.0 20060810
[ 23.099832] pci 0000:03:00.0: setting latency timer to 64
[ 23.100254] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 23.594940] [drm] Setting GART location based on new memory map
[ 23.596525] [drm] Loading R300 Microcode
[ 23.596567] [drm] Num pipes: 1
[ 23.596573] [drm] writeback test succeeded in 1 usecs
[ 26.733895] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 26.734970] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 37.472093] eth0: no IPv6 routers present
[ 3926.204529] tvp5150 0-005c: tvp5150am1 detected.
[ 3926.424038] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 3927.417369] MTS (4), id 00000000000000ff:
[ 3927.417374] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 7679.075959] usb 1-3: USB disconnect, address 3
[ 7679.076475] em28xx #0: disconnecting em28xx #0 video
[ 7679.076481] em28xx #0: V4L2 devices /dev/video0 and /dev/vbi0 deregistered
[ 7679.076635] xc2028 0-0061: destroying instance
[ 7694.084041] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 7694.222631] usb 1-3: configuration #1 chosen from 1 choice
[ 7694.222970] em28xx new video device (eb1a:2881): interface 0, class 255
[ 7694.222979] em28xx Has usb audio class
[ 7694.222984] em28xx #0: Alternate settings: 8
[ 7694.222989] em28xx #0: Alternate setting 0, max size= 0
[ 7694.222993] em28xx #0: Alternate setting 1, max size= 0
[ 7694.222998] em28xx #0: Alternate setting 2, max size= 1448
[ 7694.223003] em28xx #0: Alternate setting 3, max size= 2048
[ 7694.223008] em28xx #0: Alternate setting 4, max size= 2304
[ 7694.223013] em28xx #0: Alternate setting 5, max size= 2580
[ 7694.223019] em28xx #0: Alternate setting 6, max size= 2892
[ 7694.223024] em28xx #0: Alternate setting 7, max size= 3072
[ 7694.223263] em28xx #0: chip ID is em2882/em2883
[ 7694.394982] tuner' 0-0061: chip found @ 0xc2 (em28xx #0)
[ 7694.429404] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 00 6a 20 6a 00
[ 7694.429429] em28xx #0: i2c eeprom 10: 00 00 04 57 64 57 00 00 60 f4 00 00 02 02 00 00
[ 7694.429450] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 02 00 b8 00 00 00 5b 1e 00 00
[ 7694.429470] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 02 00 00 00 00 00 00
[ 7694.429491] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7694.429511] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7694.429531] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 20 03 55 00 53 00
[ 7694.429551] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00
[ 7694.429571] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00
[ 7694.429591] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7694.429611] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7694.429631] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7694.429651] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7694.429671] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 7694.429691] em28xx #0: i2c eeprom e0: 5a 00 55 aa 2b 14 57 03 00 17 d4 01 00 00 00 00
[ 7694.429711] em28xx #0: i2c eeprom f0: 02 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00
[ 7694.429734] EEPROM ID= 0x9567eb1a, hash = 0xa4c52420
[ 7694.429739] Vendor/Product ID= eb1a:2881
[ 7694.429743] AC97 audio (5 sample rates)
[ 7694.429746] USB Remote wakeup capable
[ 7694.429750] 500mA max power
[ 7694.429754] Table at 0x04, strings=0x206a, 0x006a, 0x0000
[ 7694.815226] xc2028 0-0061: creating new instance
[ 7694.815233] xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner
[ 7694.815249] i2c-adapter i2c-0: firmware: requesting xc3028-v27.fw
[ 7694.916571] xc2028 0-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 7695.036123] xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 7696.025665] xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 7696.042082] xc2028 0-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 7696.316468] tvp5150 0-005c: tvp5150am1 detected.
[ 7696.562350] em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0
[ 7696.620716] lgdt330x: i2c_read_demod_bytes: addr 0x0e select 0x02 error (ret == -19)
[ 7696.620807] em28xx #0/2: dvb frontend not attached. Can't attach xc3028
[ 7696.620811] em28xx #0: Found Pinnacle PCTV HD Pro Stick
[ 7696.620971] em28xx audio device (eb1a:2881): interface 1, class 1
[ 7697.296482] tvp5150 0-005c: tvp5150am1 detected.
[ 9233.544413] tvp5150 0-005c: tvp5150am1 detected.
[ 9233.744033] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9234.657703] MTS (4), id 00000000000000ff:
[ 9234.657716] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9344.371561] xc2028 0-0061: Loading firmware for type=MTS (4), id 00000003000000e0.
[ 9346.087570] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000000000010.
[ 9347.463488] MTS (4), id 00000000000000ff:
[ 9347.463500] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9387.478656] MTS (4), id 00000000007f0000:
[ 9387.478669] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[ 9388.531692] MTS (4), id 00000000000000ff:
[ 9388.531705] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9451.610498] xc2028 0-0061: Loading firmware for type=MTS (4), id 00000003000000e0.
[ 9453.719562] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000000000010.
[ 9455.211623] MTS (4), id 00000000000000ff:
[ 9455.211636] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9458.763728] xc2028 0-0061: Loading firmware for type=MTS (4), id 00000003000000e0.
[ 9460.468154] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000000000010.
[ 9461.859570] MTS (4), id 00000000000000ff:
[ 9461.859583] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9467.403626] MTS (4), id 00000000007f0000:
[ 9467.403638] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[ 9470.110588] MTS (4), id 00000000000000ff:
[ 9470.110601] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.
[ 9531.384570] tvp5150 0-005c: tvp5150am1 detected.
[ 9531.527578] MTS (4), id 00000000007f0000:
[ 9531.527589] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000000200000.
[ 9549.852416] tvp5150 0-005c: tvp5150am1 detected.
[ 9550.056030] xc2028 0-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000.
[ 9550.961583] xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 9550.976077] xc2028 0-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 9566.944459] tvp5150 0-005c: tvp5150am1 detected.
[ 9567.095484] xc2028 0-0061: Loading firmware for type=MTS (4), id 000000000000b700.
[ 9567.112356] xc2028 0-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700.
[ 9591.664517] tvp5150 0-005c: tvp5150am1 detected.
[ 9591.868266] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9592.892034] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9593.940031] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9594.968036] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9596.072032] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9597.104034] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9611.568541] tvp5150 0-005c: tvp5150am1 detected.
[ 9611.772036] xc2028 0-0061: Loading firmware for type=BASE F8MHZ MTS (7), id 0000000000000000.
[ 9612.681837] MTS (4), id 00000000000000ff:
[ 9612.681850] xc2028 0-0061: Loading firmware for type=MTS (4), id 0000000100000007.

[logari81]

δοκίμασε

Κώδικας: Επιλογή όλων

sox -r 48000 -w -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp

κι αν δεν δουλεψει κανε επανεκκίνηση και δοκιμασε

Κώδικας: Επιλογή όλων

padsp sox -r 48000 -w -c 2 -t ossdsp /dev/dsp -t ossdsp /dev/dsp

(Σε κάθε περίπτωση ασε το τερματικό οπου τρεχει η εντολή ανοιχτο οσο δοκιμαζεις)
πηγή:
http://ubuntuforums.org/showthread.php?t=723618

[fygas]

Ρίξε και μία ματία εδώ μήπως σε βοηθήσει.
http://forum.ubuntu-gr.org/viewtopic.php?f=16&t=7991#p81758
Σου υπογραμμίζω ότι πρέπει πρώτα να ανοίξεις το Tvtime και μετά να τρέξεις την εντολή σε τερμάτικό αφήνοντάς την να τρέχει στη συνέχεια από πίσω.