Πρόβλημα με Sandisk microSD 4GB

[Intotheeverflow]

Ξαφνικά μου παρουσιάστηκε πρόβλημα με την καινούρια μου κάρτα όπως περιγράφω και στον τίτλο Sandisk microSD 4GB. Τις προηγούμενες φορές την δεχόταν κανονικά το ubuntu ακόμα και όταν μέσω windows vista άλλαξα τον τύπο από fat32 σε ntfs. Πώς μπορεί να προκλήθηκε το πρόβλημα σε ολοκαίνουρια κάρτα; Επίσης δεν την αναγνωρίζουν καν πλέον τα windows, ξαφνικά!
Το σφάλμα που μου βγάζει όταν εισάγω την κάρτα μέσω adapter είναι :

Είναι αδύνατη η προσάρτηση του τόμου.
Σφάλμα org.freedesktop.Hal.Device.UnknownError.

ενώ τυχαία πήγα στο USB startup disk creator και μου εμφάνισε ότι όντως υπάρχει κάρτα.

Αφαιρώντας την πλαστική ασφάλεια, σφάλμα :

Σφάλμα org.freedesktop.Hal.Device.UnknownError.

ενώ τερματικό πληκτρολόγισα "dmesg" όπως μου είπε να δοκιμάσω κάποιος και έβγαλε :

Spoiler: show

[ 0.468513] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.468514] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.468516] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.468517] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.468518] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.468520] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.468521] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.468522] bus: 05 index 1 mmio: [0x0-0x0]
[ 0.468524] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.468525] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.468527] bus: 06 index 0 mmio: [0x0-0x0]
[ 0.468528] bus: 06 index 1 mmio: [0x0-0x0]
[ 0.468529] bus: 06 index 2 mmio: [0x0-0x0]
[ 0.468531] bus: 06 index 3 mmio: [0x0-0x0]
[ 0.468532] bus: 07 index 0 io port: [0xe000-0xefff]
[ 0.468534] bus: 07 index 1 mmio: [0xfa000000-0xfebfffff]
[ 0.468535] bus: 07 index 2 mmio: [0xc0000000-0xcfffffff]
[ 0.468537] bus: 07 index 3 mmio: [0x0-0x0]
[ 0.468544] NET: Registered protocol family 2
[ 0.480049] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.480282] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.480896] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.481152] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.481154] TCP reno registered
[ 0.488071] NET: Registered protocol family 1
[ 0.488173] checking if image is initramfs... it is
[ 0.958282] Freeing initrd memory: 7626k freed
[ 0.958451] cpufreq: No nForce2 chipset.
[ 0.958553] audit: initializing netlink socket (disabled)
[ 0.958568] type=2000 audit(1281275821.956:1): initialized
[ 0.964717] highmem bounce pool size: 64 pages
[ 0.964721] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.965687] VFS: Disk quotas dquot_6.5.1
[ 0.965728] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.966298] fuse init (API version 7.10)
[ 0.966366] msgmni has been set to 1698
[ 0.966529] alg: No test for stdrng (krng)
[ 0.966539] io scheduler noop registered
[ 0.966541] io scheduler anticipatory registered
[ 0.966542] io scheduler deadline registered
[ 0.966558] io scheduler cfq registered (default)
[ 0.966583] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 0.988133] pci 0000:00:05.0: Enabling HT MSI Mapping
[ 0.988145] pci 0000:00:05.1: Enabling HT MSI Mapping
[ 0.988156] pci 0000:00:05.2: Enabling HT MSI Mapping
[ 0.988167] pci 0000:00:06.0: Enabling HT MSI Mapping
[ 0.988179] pci 0000:00:06.1: Enabling HT MSI Mapping
[ 0.988192] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 0.988206] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 0.988217] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 0.988229] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 0.988241] pci 0000:00:0c.0: Enabling HT MSI Mapping
[ 0.988253] pci 0000:00:0d.0: Enabling HT MSI Mapping
[ 0.988265] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 0.988277] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 0.988297] pci 0000:07:00.0: Boot video device
[ 0.994086] pcieport-driver 0000:00:0a.0: setting latency timer to 64
[ 0.994105] pcieport-driver 0000:00:0a.0: found MSI capability
[ 0.994119] pcieport-driver 0000:00:0a.0: irq 2303 for MSI/MSI-X
[ 0.994124] pci_express 0000:00:0a.0:pcie00: allocate port service
[ 0.994134] pci_express 0000:00:0a.0:pcie03: allocate port service
[ 0.994161] pcieport-driver 0000:00:0b.0: setting latency timer to 64
[ 0.994178] pcieport-driver 0000:00:0b.0: found MSI capability
[ 0.994188] pcieport-driver 0000:00:0b.0: irq 2302 for MSI/MSI-X
[ 0.994193] pci_express 0000:00:0b.0:pcie00: allocate port service
[ 0.994201] pci_express 0000:00:0b.0:pcie03: allocate port service
[ 0.994228] pcieport-driver 0000:00:0c.0: setting latency timer to 64
[ 0.994245] pcieport-driver 0000:00:0c.0: found MSI capability
[ 0.994255] pcieport-driver 0000:00:0c.0: irq 2301 for MSI/MSI-X
[ 0.994260] pci_express 0000:00:0c.0:pcie00: allocate port service
[ 0.994269] pci_express 0000:00:0c.0:pcie03: allocate port service
[ 0.994296] pcieport-driver 0000:00:0d.0: setting latency timer to 64
[ 0.994313] pcieport-driver 0000:00:0d.0: found MSI capability
[ 0.994323] pcieport-driver 0000:00:0d.0: irq 2300 for MSI/MSI-X
[ 0.994328] pci_express 0000:00:0d.0:pcie00: allocate port service
[ 0.994339] pci_express 0000:00:0d.0:pcie03: allocate port service
[ 0.994365] pcieport-driver 0000:00:0e.0: setting latency timer to 64
[ 0.994383] pcieport-driver 0000:00:0e.0: found MSI capability
[ 0.994392] pcieport-driver 0000:00:0e.0: irq 2299 for MSI/MSI-X
[ 0.994397] pci_express 0000:00:0e.0:pcie00: allocate port service
[ 0.994406] pci_express 0000:00:0e.0:pcie03: allocate port service
[ 0.994433] pcieport-driver 0000:00:0f.0: setting latency timer to 64
[ 0.994450] pcieport-driver 0000:00:0f.0: found MSI capability
[ 0.994459] pcieport-driver 0000:00:0f.0: irq 2298 for MSI/MSI-X
[ 0.994464] pci_express 0000:00:0f.0:pcie00: allocate port service
[ 0.994474] pci_express 0000:00:0f.0:pcie03: allocate port service
[ 0.994510] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.994517] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.994625] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.994627] ACPI: Power Button (FF) [PWRF]
[ 0.994665] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.994666] ACPI: Power Button (CM) [PWRB]
[ 0.994869] processor ACPI_CPU:00: registered as cooling_device0
[ 0.994892] processor ACPI_CPU:01: registered as cooling_device1
[ 0.998381] isapnp: Scanning for PnP cards...
[ 1.350836] isapnp: No Plug & Play device found
[ 1.357178] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.357258] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.357340] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.357528] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.357903] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 1.357912] serial 0000:01:01.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
[ 1.357978] 0000:01:01.0: ttyS2 at I/O 0xd808 (irq = 19) is a 16450
[ 1.358020] 0000:01:01.0: ttyS3 at I/O 0xd810 (irq = 19) is a 8250
[ 1.358033] Couldn't register serial port 0000:01:01.0: -28
[ 1.358489] brd: module loaded
[ 1.358706] loop: module loaded
[ 1.358755] Fixed MDIO Bus: probed
[ 1.358759] PPP generic driver version 2.4.2
[ 1.358800] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.358819] Driver 'sd' needs updating - please use bus_type methods
[ 1.358826] Driver 'sr' needs updating - please use bus_type methods
[ 1.358969] sata_nv 0000:00:05.0: version 3.5
[ 1.359201] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.359207] sata_nv 0000:00:05.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.359209] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 1.359246] sata_nv 0000:00:05.0: setting latency timer to 64
[ 1.359370] scsi0 : sata_nv
[ 1.359447] scsi1 : sata_nv
[ 1.359573] ata1: SATA max UDMA/133 cmd 0xc480 ctl 0xc400 bmdma 0xbc00 irq 23
[ 1.359575] ata2: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xbc08 irq 23
[ 2.236034] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.284281] ata1.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
[ 2.284283] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.350917] ata1.00: configured for UDMA/133
[ 3.082197] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.082290] scsi 0:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
[ 3.082362] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.082375] sd 0:0:0:0: [sda] Write Protect is off
[ 3.082376] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.082393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.082439] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
[ 3.082449] sd 0:0:0:0: [sda] Write Protect is off
[ 3.082451] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.082466] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.082469] sda: sda1
[ 3.098693] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.098721] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.098961] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 3.098967] sata_nv 0000:00:05.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
[ 3.098969] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 3.098999] sata_nv 0000:00:05.1: setting latency timer to 64
[ 3.099127] scsi2 : sata_nv
[ 3.099192] scsi3 : sata_nv
[ 3.099308] ata3: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb080 irq 22
[ 3.099310] ata4: SATA max UDMA/133 cmd 0xb480 ctl 0xb400 bmdma 0xb088 irq 22
[ 3.830187] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.562186] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.562424] ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 21
[ 4.562430] sata_nv 0000:00:05.2: PCI INT C -> Link[LSA2] -> GSI 21 (level, low) -> IRQ 21
[ 4.562432] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 4.562461] sata_nv 0000:00:05.2: setting latency timer to 64
[ 4.562585] scsi4 : sata_nv
[ 4.562635] scsi5 : sata_nv
[ 4.562750] ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 21
[ 4.562752] ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 21
[ 5.294197] ata5: SATA link down (SStatus 0 SControl 300)
[ 6.026198] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.026278] pata_amd 0000:00:04.0: version 0.3.10
[ 6.026305] pata_amd 0000:00:04.0: setting latency timer to 64
[ 6.026381] scsi6 : pata_amd
[ 6.026442] scsi7 : pata_amd
[ 6.027299] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 6.027301] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 6.188261] ata7.00: ATAPI: Optiarc DVD RW AD-7173A, 1-01, max UDMA/66
[ 6.188279] ata7: nv_mode_filter: 0x1f39f&0x1f01f->0x1f01f, BIOS=0x1f000 (0xc5000000) ACPI=0x1f01f (30:900:0x11)
[ 6.204217] ata7.00: configured for UDMA/66
[ 6.205098] ata8: port disabled. ignoring.
[ 6.206005] scsi 6:0:0:0: CD-ROM Optiarc DVD RW AD-7173A 1-01 PQ: 0 ANSI: 5
[ 6.206738] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.206740] Uniform CD-ROM driver Revision: 3.20
[ 6.206823] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 6.206855] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 6.207250] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.207487] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 6.207494] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 20 (level, low) -> IRQ 20
[ 6.207503] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 6.207505] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 6.207547] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 6.207569] ehci_hcd 0000:00:02.1: debug port 1
[ 6.207572] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 6.207587] ehci_hcd 0000:00:02.1: irq 20, io mem 0xf9efac00
[ 6.216014] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 6.216071] usb usb1: configuration #1 chosen from 1 choice
[ 6.216091] hub 1-0:1.0: USB hub found
[ 6.216098] hub 1-0:1.0: 10 ports detected
[ 6.216182] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.216415] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 6.216417] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[ 6.216424] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 6.216426] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 6.216456] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 6.216465] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf9efb000
[ 6.274038] usb usb2: configuration #1 chosen from 1 choice
[ 6.274056] hub 2-0:1.0: USB hub found
[ 6.274063] hub 2-0:1.0: 10 ports detected
[ 6.274144] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.274204] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 6.276789] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.276793] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.281033] mice: PS/2 mouse device common for all mice
[ 6.293058] rtc_cmos 00:02: RTC can wake from S4
[ 6.293088] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 6.293121] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 6.293165] device-mapper: uevent: version 1.0.3
[ 6.293243] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 6.293375] device-mapper: multipath: version 1.0.5 loaded
[ 6.293377] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 6.293460] EISA: Probing bus 0 at eisa.0
[ 6.293467] Cannot allocate resource for EISA slot 2
[ 6.293479] EISA: Detected 0 cards.
[ 6.293570] cpuidle: using governor ladder
[ 6.293572] cpuidle: using governor menu
[ 6.293938] TCP cubic registered
[ 6.294036] NET: Registered protocol family 10
[ 6.294348] lo: Disabled Privacy Extensions
[ 6.294578] NET: Registered protocol family 17
[ 6.294590] Bluetooth: L2CAP ver 2.11
[ 6.294591] Bluetooth: L2CAP socket layer initialized
[ 6.294593] Bluetooth: SCO (Voice Link) ver 0.6
[ 6.294595] Bluetooth: SCO socket layer initialized
[ 6.294635] Bluetooth: RFCOMM socket layer initialized
[ 6.294643] Bluetooth: RFCOMM TTY layer initialized
[ 6.294644] Bluetooth: RFCOMM ver 1.10
[ 6.294687] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (2 cpu cores) (version 2.20.00)
[ 6.294708] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 6.294783] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 6.294853] Using IPI No-Shortcut mode
[ 6.294903] registered taskstats version 1
[ 6.295033] Magic number: 6:433:988
[ 6.295125] rtc_cmos 00:02: setting system clock to 2010-08-08 13:57:07 UTC (1281275827)
[ 6.295127] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 6.295129] EDD information not available.
[ 6.295461] Freeing unused kernel memory: 532k freed
[ 6.295574] Write protecting the kernel text: 4120k
[ 6.295614] Write protecting the kernel read-only data: 1524k
[ 6.315181] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 6.472509] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 6.472799] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 6.472803] forcedeth 0000:00:08.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 6.472807] forcedeth 0000:00:08.0: setting latency timer to 64
[ 6.472850] nv_probe: set workaround bit for reversed mac addr
[ 6.741013] usb 1-7: new high speed USB device using ehci_hcd and address 4
[ 6.891049] usb 1-7: configuration #1 chosen from 1 choice
[ 6.895864] Initializing USB Mass Storage driver...
[ 6.895965] scsi8 : SCSI emulation for USB Mass Storage devices
[ 6.896037] usb-storage: device found at 4
[ 6.896040] usb-storage: waiting for device to settle before scanning
[ 6.896037] usbcore: registered new interface driver usb-storage
[ 6.896040] USB Mass Storage support registered.
[ 6.993769] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x1c1 @ 0, addr 00:16:17:b6:f8:22
[ 6.993772] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 6.994067] ACPI: PCI Interrupt Link [LMAD] enabled at IRQ 21
[ 6.994070] forcedeth 0000:00:09.0: PCI INT A -> Link[LMAD] -> GSI 21 (level, low) -> IRQ 21
[ 6.994074] forcedeth 0000:00:09.0: setting latency timer to 64
[ 6.994143] nv_probe: set workaround bit for reversed mac addr
[ 7.185015] usb 2-2: new low speed USB device using ohci_hcd and address 2
[ 7.406092] usb 2-2: configuration #1 chosen from 1 choice
[ 7.413085] usbcore: registered new interface driver hiddev
[ 7.420233] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4
[ 7.420410] generic-usb 0003:045E:0084.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse] on usb-0000:00:02.0-2/input0
[ 7.420426] usbcore: registered new interface driver usbhid
[ 7.420429] usbhid: v2.6:USB HID core driver
[ 7.513808] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x1c1 @ 1, addr 00:16:17:be:28:58
[ 7.513812] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 7.718141] usb 2-4: new full speed USB device using ohci_hcd and address 3
[ 7.937098] usb 2-4: configuration #1 chosen from 1 choice
[ 8.307531] kjournald starting. Commit interval 5 seconds
[ 8.307546] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.896148] usb-storage: device scan complete
[ 11.903266] scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
[ 11.910383] scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
[ 11.917505] scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
[ 11.924507] scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
[ 11.926444] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 11.926494] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 11.927418] sd 8:0:0:1: [sdc] Attached SCSI removable disk
[ 11.927449] sd 8:0:0:1: Attached scsi generic sg3 type 0
[ 11.928417] sd 8:0:0:2: [sdd] Attached SCSI removable disk
[ 11.928447] sd 8:0:0:2: Attached scsi generic sg4 type 0
[ 11.929414] sd 8:0:0:3: [sde] Attached SCSI removable disk
[ 11.929447] sd 8:0:0:3: Attached scsi generic sg5 type 0
[ 13.753097] udev: starting version 141
[ 14.485526] parport_pc 00:07: reported by Plug and Play ACPI
[ 14.485573] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 14.577341] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 14.668908] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[ 14.668938] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[ 14.687268] ppdev: user-space parallel port driver
[ 14.688835] Linux video capture interface: v2.00
[ 14.777483] gspca: main v2.3.0 registered
[ 14.799086] gspca: probing 046d:092e
[ 14.830665] ck804xrom ck804xrom_init_one(): Unable to register resource 0x00000000ff000000-0x00000000ffffffff - kernel bug?
[ 14.877720] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 14.878105] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 14.878118] saa7134 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
[ 14.878123] saa7133[0]: found at 0000:01:00.0, rev: 209, irq: 18, latency: 64, mmio: 0xf9fff800
[ 14.878129] saa7133[0]: subsystem: 17de:7250, board: KWorld DVB-T 210 [card=114,autodetected]
[ 14.878166] saa7133[0]: board init: gpio is 100
[ 14.907695] Found: PMC Pm49FL004
[ 14.907702] ck804xrom @fff80000: Found 1 x8 devices at 0x0 in 8-bit bank
[ 14.920273] number of JEDEC chips: 1
[ 14.920276] cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
[ 14.976130] gspca: probe ok
[ 14.976151] usbcore: registered new interface driver spca561
[ 14.976169] spca561: registered
[ 15.005444] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
[ 15.005449] HDA Intel 0000:00:06.1: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20
[ 15.005504] HDA Intel 0000:00:06.1: setting latency timer to 64
[ 15.028019] saa7133[0]: i2c eeprom 00: de 17 50 72 ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028027] saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028033] saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028040] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028046] saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028052] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028058] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028064] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028071] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028077] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028083] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028089] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028096] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028102] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028108] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.028114] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 15.096072] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 15.184015] tda829x 2-004b: setting tuner address to 61
[ 15.252025] tda829x 2-004b: type set to tda8290+75a
[ 19.084308] saa7133[0]: registered device video1 [v4l2]
[ 19.084331] saa7133[0]: registered device vbi0
[ 19.084352] saa7133[0]: registered device radio0
[ 19.152772] saa7134 ALSA driver for DMA sound loaded
[ 19.152801] saa7133[0]/alsa: saa7133[0] at 0xf9fff800 irq 18 registered as card -2
[ 19.221353] dvb_init() allocating 1 frontend
[ 19.241109] DVB: registering new adapter (saa7133[0])
[ 19.241114] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
[ 19.275890] lp0: using parport0 (interrupt-driven).
[ 19.313017] tda1004x: setting up plls for 48MHz sampling clock
[ 19.596014] tda1004x: found firmware revision 29 -- ok
[ 19.870731] EXT3 FS on loop0, internal journal
[ 28.496098] Adding 976552k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:976552k
[ 28.656658] type=1505 audit(1281265049.860:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2228
[ 28.695806] type=1505 audit(1281265049.896:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2232
[ 28.695925] type=1505 audit(1281265049.896:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2232
[ 28.695963] type=1505 audit(1281265049.896:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2232
[ 28.696021] type=1505 audit(1281265049.900:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2232
[ 28.809566] type=1505 audit(1281265050.012:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2237
[ 28.809732] type=1505 audit(1281265050.012:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2237
[ 28.832256] type=1505 audit(1281265050.036:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2241
[ 32.011964] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 32.011966] Bluetooth: BNEP filters: protocol multicast
[ 32.041810] Bridge firewalling registered
[ 36.797623] forcedeth 0000:00:09.0: irq 2297 for MSI/MSI-X
[ 36.797833] eth1: no link during initialization.
[ 36.798265] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 36.799338] forcedeth 0000:00:08.0: irq 2296 for MSI/MSI-X
[ 47.256014] eth0: no IPv6 routers present
[ 57.149227] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 57.498246] ISOFS: changing to secondary root
[ 170.857124] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 170.858736] sd 8:0:0:2: [sdd] Write Protect is on
[ 170.858739] sd 8:0:0:2: [sdd] Mode Sense: 03 00 80 00
[ 170.858741] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 170.860611] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 170.862740] sd 8:0:0:2: [sdd] Write Protect is on
[ 170.862742] sd 8:0:0:2: [sdd] Mode Sense: 03 00 80 00
[ 170.862744] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 170.862747] sdd: sdd1
[ 202.657743] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 202.659757] sd 8:0:0:2: [sdd] Write Protect is on
[ 202.659761] sd 8:0:0:2: [sdd] Mode Sense: 03 00 80 00
[ 202.659763] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 202.661619] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 202.663742] sd 8:0:0:2: [sdd] Write Protect is on
[ 202.663745] sd 8:0:0:2: [sdd] Mode Sense: 03 00 80 00
[ 202.663747] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 202.663752] sdd: sdd1
[ 494.658755] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 494.660747] sd 8:0:0:2: [sdd] Write Protect is on
[ 494.660749] sd 8:0:0:2: [sdd] Mode Sense: 03 00 80 00
[ 494.660751] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 494.662617] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 494.664753] sd 8:0:0:2: [sdd] Write Protect is on
[ 494.664755] sd 8:0:0:2: [sdd] Mode Sense: 03 00 80 00
[ 494.664756] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 494.664760] sdd: sdd1
[ 508.656873] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 508.658742] sd 8:0:0:2: [sdd] Write Protect is off
[ 508.658745] sd 8:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 508.658747] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 508.660611] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 508.662742] sd 8:0:0:2: [sdd] Write Protect is off
[ 508.662744] sd 8:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 508.662745] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 508.662749] sdd: sdd1
[ 932.656997] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 932.659743] sd 8:0:0:2: [sdd] Write Protect is off
[ 932.659745] sd 8:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 932.659747] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 932.661617] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 932.663736] sd 8:0:0:2: [sdd] Write Protect is off
[ 932.663737] sd 8:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 932.663739] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 932.663742] sdd: sdd1
[ 960.657997] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 960.659736] sd 8:0:0:2: [sdd] Write Protect is off
[ 960.659738] sd 8:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 960.659740] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 960.661739] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 960.663739] sd 8:0:0:2: [sdd] Write Protect is off
[ 960.663741] sd 8:0:0:2: [sdd] Mode Sense: 03 00 00 00
[ 960.663743] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 960.663747] sdd: sdd1
[ 1046.657753] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 1046.659741] sd 8:0:0:2: [sdd] Write Protect is on
[ 1046.659743] sd 8:0:0:2: [sdd] Mode Sense: 03 00 80 00
[ 1046.659745] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 1046.661623] sd 8:0:0:2: [sdd] 7744512 512-byte hardware sectors: (3.96 GB/3.69 GiB)
[ 1046.663740] sd 8:0:0:2: [sdd] Write Protect is on
[ 1046.663741] sd 8:0:0:2: [sdd] Mode Sense: 03 00 80 00
[ 1046.663743] sd 8:0:0:2: [sdd] Assuming drive cache: write through
[ 1046.663747] sdd: sdd1
code@ubuntu:~$

[Intotheeverflow]

Επίσης. Μόλις τοποθέτησα την κάρτα στο Sansa mp3 player μου και την εμφάνισε στο ubuntu και τα αρχεία που περιείχε, δεν γνωρίζω όμως πώς να αλλάξω από NTFS σε FAT ώστε να την αναγνωρίζει το λογισμικό του sansa

[MakisM1]

α) Αντιγραφεις τα περιεχομενα καπου αλλου (γιατι θα κανεις format)

β) Κανεις format την καρτα με το Gparted πχ. σε FAT (νομιζω οτι το κανει το GParted)

γ) Αντιγραφεις τα αρχεια ξανα στην καρτα.

δ) Φτιαχνεις την υπογραφη σου συμφωνα με τις οδηγιες προς νεοεισερχομενους (λινκ στην τελευταια γραμμη της υπογραφης μου)

Φιλικα

ΜακηςΜ

[the_eye]

Καλύτερα format σε fat32

[Intotheeverflow]

Ακολούθησα οδηγίες για format σε FAT32 από NTFS ώστε να την αναγνωρίζουν τα (Σ)vista, χρησιμοποιώντας τερματικό πάλι. Από FAT32 έκανα μετατροπή σε FAT και επιτέλους μετά από πολύωρη τσατίλα τα κατάφερα και την χρησιμοποίησα την κάρτα στο Sansa mp3 player με το rockbox.

Θα φτιάξω τώρα την υπογραφή! Το πρόβλημα με την κάρτα λύθηκε. Δεν είχε κάποιο σφάλμα, απλά έπρεπε να χρησιμοποιήσω τερματικό.
Σημαντική παρατήρηση : δεν την δεχόταν με τον adapter, την εμφάνισε όμως κανονικά και χωρίς σφάλμα μέσω του mp3 player.

[MakisM1]

Γιατι, δεν σε βολευε το GParted που κανει format FAT16 και FAT32 σε δυο λεπτακια, η γουσταρεις την πολυωρη τσαντιλα και τα (s)Vista?