driver για την not only tv LV5HD? (usb tv)

[nikpapazoglou]

γεια σε ολους. προσφατα αγορασα μια usb tv αλλα δεν μπορω να βρω drivers για ubuntu.
η καρτα ειναι τις not only tv και μοντελο LV5HD.
γνωριζει καποιος αν υπαρχει driver για ubuntu και που θα τον βρω?
ευχαριστω θερμα

[s.dalas]

Με συνδεμένη τη συσκευή στο usb δώσε σε ένα τερματικό την εντολή

Κώδικας: Επιλογή όλων

lsusb

και δώσε εδώ το αποτέλεσμα!

[nikpapazoglou]

Κώδικας: Επιλογή όλων

:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0438:ac14 Advanced Micro Devices, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


[s.dalas]

Όχι οτι βοηθάει αλλά εχει ερωτηθεί πρόσφατα, https://answers.launchpad.net/ubuntu/+source/linux/+question/132209 ίσως να το αναφέρεις και εσύ εκει για να ανοίξει πάλι το θέμα!

[xaris2335]

για δώσε και το αποτέλεσμα απο

Κώδικας: Επιλογή όλων

dmesg

[nikpapazoglou]

Κώδικας: Επιλογή όλων

[ 0.355281] alloc irq_desc for 17 on node -1
[ 0.355283] alloc kstat_irqs on node -1
[ 0.355287] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.355292] pci 0000:00:1c.1: setting latency timer to 64
[ 0.355304] alloc irq_desc for 19 on node -1
[ 0.355306] alloc kstat_irqs on node -1
[ 0.355310] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.355316] pci 0000:00:1c.3: setting latency timer to 64
[ 0.355327] pci 0000:00:1e.0: setting latency timer to 64
[ 0.355345] alloc irq_desc for 18 on node -1
[ 0.355347] alloc kstat_irqs on node -1
[ 0.355352] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.355360] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.355363] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.355366] pci_bus 0000:08: resource 0 [io 0x5000-0x5fff]
[ 0.355368] pci_bus 0000:08: resource 1 [mem 0x64000000-0x641fffff]
[ 0.355371] pci_bus 0000:08: resource 2 [mem 0x64200000-0x643fffff 64bit pref]
[ 0.355374] pci_bus 0000:10: resource 0 [io 0x6000-0x6fff]
[ 0.355377] pci_bus 0000:10: resource 1 [mem 0xf4000000-0xf40fffff]
[ 0.355380] pci_bus 0000:10: resource 2 [mem 0x64400000-0x645fffff 64bit pref]
[ 0.355382] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff]
[ 0.355385] pci_bus 0000:20: resource 1 [mem 0xf0000000-0xf3ffffff]
[ 0.355388] pci_bus 0000:20: resource 2 [mem 0x64600000-0x647fffff 64bit pref]
[ 0.355391] pci_bus 0000:02: resource 0 [io 0x7000-0x7fff]
[ 0.355393] pci_bus 0000:02: resource 1 [mem 0xf4100000-0xf43fffff]
[ 0.355396] pci_bus 0000:02: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.355399] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.355401] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.355404] pci_bus 0000:03: resource 0 [io 0x7000-0x70ff]
[ 0.355406] pci_bus 0000:03: resource 1 [io 0x7400-0x74ff]
[ 0.355409] pci_bus 0000:03: resource 2 [mem 0x60000000-0x63ffffff pref]
[ 0.355412] pci_bus 0000:03: resource 3 [mem 0x68000000-0x6bffffff]
[ 0.355457] NET: Registered protocol family 2
[ 0.355539] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.355830] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.356459] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.356773] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.356777] TCP reno registered
[ 0.356780] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.356799] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.356896] NET: Registered protocol family 1
[ 0.356918] pci 0000:00:02.0: Boot video device
[ 0.357070] PCI: CLS 64 bytes, default 64
[ 0.357291] cpufreq-nforce2: No nForce2 chipset.
[ 0.357324] Scanning for low memory corruption every 60 seconds
[ 0.357485] audit: initializing netlink socket (disabled)
[ 0.357496] type=2000 audit(1293054662.352:1): initialized
[ 0.368669] highmem bounce pool size: 64 pages
[ 0.368675] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.370298] VFS: Disk quotas dquot_6.5.2
[ 0.370367] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.371015] fuse init (API version 7.14)
[ 0.371114] msgmni has been set to 1696
[ 0.371512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.371515] io scheduler noop registered
[ 0.371518] io scheduler deadline registered
[ 0.371532] io scheduler cfq registered (default)
[ 0.371662] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.371718] alloc irq_desc for 40 on node -1
[ 0.371720] alloc kstat_irqs on node -1
[ 0.371734] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.371845] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.371895] alloc irq_desc for 41 on node -1
[ 0.371897] alloc kstat_irqs on node -1
[ 0.371906] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.372033] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.372084] alloc irq_desc for 42 on node -1
[ 0.372086] alloc kstat_irqs on node -1
[ 0.372095] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.372222] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.372326] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.372431] intel_idle: MWAIT substates: 0x22220
[ 0.372434] intel_idle: does not run on family 6 model 15
[ 0.376571] ACPI: AC Adapter [C1BC] (on-line)
[ 0.376664] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.376671] ACPI: Sleep Button [C243]
[ 0.376720] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.376786] ACPI: Lid Switch [C23C]
[ 0.376839] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.376843] ACPI: Power Button [PWRF]
[ 0.377083] ACPI: Fan [C324] (off)
[ 0.377273] ACPI: Fan [C325] (off)
[ 0.377471] ACPI: Fan [C326] (off)
[ 0.377659] ACPI: Fan [C327] (off)
[ 0.377977] ACPI: acpi_idle registered with cpuidle
[ 0.384309] Monitor-Mwait will be used to enter C-1 state
[ 0.384349] Monitor-Mwait will be used to enter C-2 state
[ 0.384357] Marking TSC unstable due to TSC halts in idle
[ 0.385316] Switching to clocksource hpet
[ 0.426464] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.426476] ACPI: Thermal Zone [TZ0] (61 C)
[ 0.441680] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.441691] ACPI: Thermal Zone [TZ1] (64 C)
[ 0.445726] Freeing initrd memory: 10508k freed
[ 0.456634] thermal LNXTHERM:03: registered as thermal_zone2
[ 0.456648] ACPI: Thermal Zone [TZ2] (49 C)
[ 0.466879] thermal LNXTHERM:04: registered as thermal_zone3
[ 0.466889] ACPI: Thermal Zone [TZ3] (28 C)
[ 0.470583] thermal LNXTHERM:05: registered as thermal_zone4
[ 0.470596] ACPI: Thermal Zone [TZ4] (55 C)
[ 0.470789] ERST: Table is not found!
[ 0.471027] isapnp: Scanning for PnP cards...
[ 0.472712] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.474492] brd: module loaded
[ 0.475100] loop: module loaded
[ 0.475307] ata_piix 0000:00:1f.1: version 2.13
[ 0.475329] ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.475378] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.475462] scsi0 : ata_piix
[ 0.475550] scsi1 : ata_piix
[ 0.475799] ACPI: Battery Slot [C1BD] (battery absent)
[ 0.476271] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
[ 0.476276] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
[ 0.476652] Fixed MDIO Bus: probed
[ 0.476691] PPP generic driver version 2.4.2
[ 0.476730] tun: Universal TUN/TAP device driver, 1.6
[ 0.476732] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.476816] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.476838] alloc irq_desc for 20 on node -1
[ 0.476840] alloc kstat_irqs on node -1
[ 0.476848] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.476862] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.476866] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.476908] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.476932] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.476945] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.480842] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 0.480859] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4584000
[ 0.484937] ata2: port disabled. ignoring.
[ 0.497018] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.497152] hub 1-0:1.0: USB hub found
[ 0.497158] hub 1-0:1.0: 8 ports detected
[ 0.497256] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.497272] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.497294] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.497302] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.497306] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.497340] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.497369] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[ 0.497503] hub 2-0:1.0: USB hub found
[ 0.497508] hub 2-0:1.0: 2 ports detected
[ 0.497601] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.497608] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.497612] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.497646] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.497685] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00004040
[ 0.497812] hub 3-0:1.0: USB hub found
[ 0.497817] hub 3-0:1.0: 2 ports detected
[ 0.497885] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.497892] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.497896] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.497937] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.497975] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[ 0.498099] hub 4-0:1.0: USB hub found
[ 0.498105] hub 4-0:1.0: 2 ports detected
[ 0.498176] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.498183] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.498187] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.498222] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.498260] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
[ 0.498387] hub 5-0:1.0: USB hub found
[ 0.498392] hub 5-0:1.0: 2 ports detected
[ 0.498538] PNP: PS/2 Controller [PNP0303:C21A,PNP0f13:C21B] at 0x60,0x64 irq 1,12
[ 0.500129] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.500903] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.500909] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.500941] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.500966] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.500992] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.502868] mice: PS/2 mouse device common for all mice
[ 0.503043] rtc_cmos 00:06: RTC can wake from S4
[ 0.503082] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.503129] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.503237] device-mapper: uevent: version 1.0.3
[ 0.503345] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.503413] device-mapper: multipath: version 1.1.1 loaded
[ 0.503416] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.503534] EISA: Probing bus 0 at eisa.0
[ 0.503541] Cannot allocate resource for EISA slot 1
[ 0.503543] Cannot allocate resource for EISA slot 2
[ 0.503546] Cannot allocate resource for EISA slot 3
[ 0.503548] Cannot allocate resource for EISA slot 4
[ 0.503550] Cannot allocate resource for EISA slot 5
[ 0.503552] Cannot allocate resource for EISA slot 6
[ 0.503554] Cannot allocate resource for EISA slot 7
[ 0.503561] EISA: Detected 0 cards.
[ 0.503721] cpuidle: using governor ladder
[ 0.503813] cpuidle: using governor menu
[ 0.504164] TCP cubic registered
[ 0.504305] NET: Registered protocol family 10
[ 0.504716] lo: Disabled Privacy Extensions
[ 0.504987] NET: Registered protocol family 17
[ 0.518117] ACPI: Battery Slot [C1BE] (battery present)
[ 0.523042] Using IPI No-Shortcut mode
[ 0.523142] PM: Resume from disk failed.
[ 0.523157] registered taskstats version 1
[ 0.523519] Magic number: 6:259:905
[ 0.523617] rtc_cmos 00:06: setting system clock to 2010-12-22 21:51:02 UTC (1293054662)
[ 0.523621] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.523623] EDD information not available.
[ 0.524756] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.649488] ata1.00: ATAPI: PIONEER DVDRW DVR-K17, 1.05, max MWDMA2
[ 0.665357] ata1.00: configured for MWDMA2
[ 0.825356] isapnp: No Plug & Play device found
[ 0.826878] scsi 0:0:0:0: CD-ROM PIONEER DVDRW DVR-K17 1.05 PQ: 0 ANSI: 5
[ 0.827918] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.827924] Uniform CD-ROM driver Revision: 3.20
[ 0.828122] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.828188] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.828272] Freeing unused kernel memory: 688k freed
[ 0.828740] Write protecting the kernel text: 4932k
[ 0.828801] Write protecting the kernel read-only data: 1980k
[ 0.850246] udev[84]: starting version 163
[ 0.992067] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.023016] ahci 0000:00:1f.2: version 3.0
[ 1.023043] ahci 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.023099] alloc irq_desc for 43 on node -1
[ 1.023102] alloc kstat_irqs on node -1
[ 1.023117] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 1.023176] ahci: SSS flag set, parallel bus scan disabled
[ 1.023208] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.023213] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 1.023221] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.050395] firewire_ohci 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.054993] scsi2 : ahci
[ 1.059086] scsi3 : ahci
[ 1.059325] scsi4 : ahci
[ 1.060861] scsi5 : ahci
[ 1.061050] ata3: SATA max UDMA/133 abar m1024@0xf4585000 port 0xf4585100 irq 43
[ 1.061053] ata4: DUMMY
[ 1.061055] ata5: DUMMY
[ 1.061057] ata6: DUMMY
[ 1.104088] firewire_ohci: Added fw-ohci device 0000:02:06.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2
[ 1.104195] b44 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.125097] ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
[ 1.125110] ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
[ 1.125121] ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
[ 1.164130] ssb: Sonics Silicon Backplane found on PCI device 0000:02:0e.0
[ 1.164164] b44: b44.c:v2.0
[ 1.186924] b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:17:a4:db:33:8e
[ 1.552057] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.554580] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.554585] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.554765] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.554773] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.555245] ata3.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
[ 1.555252] ata3.00: 234441648 sectors, multi 16: LBA48
[ 1.560465] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.560469] ata3.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 1.560645] ata3.00: ACPI cmd c6/00:10:00:00:00:a0 (SET MULTIPLE MODE) succeeded
[ 1.560653] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.561179] ata3.00: configured for UDMA/100
[ 1.579780] ata3.00: configured for UDMA/100
[ 1.579786] ata3: EH complete
[ 1.580023] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[ 1.580217] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.580336] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.580403] sd 2:0:0:0: [sda] Write Protect is off
[ 1.580407] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.580431] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.580584] sda: sda1 sda2 sda3 <
[ 1.604174] firewire_core: created device fw0: GUID 00023f99294d110e, S400
[ 1.620676] sda5 >
[ 1.621121] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.627681] usbcore: registered new interface driver hiddev
[ 1.643431] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input4
[ 1.643541] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2/input0
[ 1.643561] usbcore: registered new interface driver usbhid
[ 1.643563] usbhid: USB HID core driver
[ 2.076374] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.076379] EXT4-fs (sda1): write access will be enabled during recovery
[ 9.657686] EXT4-fs (sda1): recovery complete
[ 9.658359] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 32.595300] udev[383]: starting version 163
[ 32.881502] Adding 4495356k swap on /dev/sda5. Priority:-1 extents:1 across:4495356k
[ 33.062496] type=1400 audit(1293054695.035:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=553 comm="apparmor_parser"
[ 33.063234] type=1400 audit(1293054695.035:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
[ 33.063635] type=1400 audit(1293054695.035:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
[ 33.067323] type=1400 audit(1293054695.039:5): apparmor="STATUS" operation="profile_load" name="/usr/sbin/ntpd" pid=569 comm="apparmor_parser"
[ 33.109862] lp: driver loaded but no devices found
[ 33.142810] input: HP WMI hotkeys as /devices/virtual/input/input5
[ 33.370525] parport_pc 00:02: reported by Plug and Play ACPI
[ 33.370605] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 33.469183] lp0: using parport0 (interrupt-driven).
[ 33.528440] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0
[ 33.528445] Synaptics: Clickpad mode enabled
[ 33.528448] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 33.568135] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input6
[ 33.629718] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30a2]
[ 33.629743] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[ 33.629749] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[ 33.629752] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 33.629759] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01011b22, devctl 0x64
[ 33.651748] ppdev: user-space parallel port driver
[ 33.670999] Linux agpgart interface v0.103
[ 33.685724] intel_rng: FWH not detected
[ 33.698171] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 33.698293] [Firmware Bug]: _BCQ is used instead of _BQC
[ 33.699859] acpi device:01: registered as cooling_device6
[ 33.700517] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 33.700632] ACPI: Video Device [C085] (multi-head: yes rom: no post: no)
[ 33.700737] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 33.703116] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 33.713894] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 33.860697] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[ 33.860702] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 33.860707] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 33.860717] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io 0x7000-0x7fff]
[ 33.860721] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: excluding 0x7000-0x70ff 0x7400-0x74ff
[ 33.867689] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4100000-0xf43fffff]
[ 33.868165] [drm] Initialized drm 1.1.0 20060810
[ 33.868263] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4100000-0xf43fffff: excluding 0xf4100000-0xf412ffff
[ 33.868281] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x60000000-0x63ffffff pref]
[ 33.868284] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x63ffffff: excluding 0x60000000-0x63ffffff
[ 33.982756] leds_ss4200: no LED devices found
[ 34.032122] cfg80211: Calling CRDA to update world regulatory domain
[ 34.037470] cfg80211: World regulatory domain updated:
[ 34.037473] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 34.037477] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.037480] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 34.037483] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 34.037486] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.037489] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 34.054474] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 34.054481] i915 0000:00:02.0: setting latency timer to 64
[ 34.081411] [drm] set up 7M of stolen space
[ 34.187088] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 34.187485] [drm] initialized overlay support
[ 34.461420] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x37f
[ 34.463484] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 34.464376] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 34.465120] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 34.465924] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[ 34.465992] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
[ 34.466059] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff
[ 34.466127] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 34.501066] Skipping EDID probe due to cached edid
[ 34.506458] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 34.568228] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:s
[ 34.568232] iwl3945: Copyright(c) 2003-2010 Intel Corporation
[ 34.568370] iwl3945 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 34.568386] iwl3945 0000:10:00.0: setting latency timer to 64
[ 34.616928] type=1400 audit(1293054696.587:6): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=875 comm="apparmor_parser"
[ 34.620317] type=1400 audit(1293054696.591:7): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=876 comm="apparmor_parser"
[ 34.621056] type=1400 audit(1293054696.595:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=876 comm="apparmor_parser"
[ 34.621456] type=1400 audit(1293054696.595:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=876 comm="apparmor_parser"
[ 34.627434] type=1400 audit(1293054696.599:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=881 comm="apparmor_parser"
[ 34.628450] type=1400 audit(1293054696.599:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=881 comm="apparmor_parser"
[ 34.644988] iwl3945 0000:10:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 34.644993] iwl3945 0000:10:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 34.645413] alloc irq_desc for 44 on node -1
[ 34.645416] alloc kstat_irqs on node -1
[ 34.645451] iwl3945 0000:10:00.0: irq 44 for MSI/MSI-X
[ 34.698220] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.881980] Console: switching to colour frame buffer device 160x50
[ 34.885879] fb0: inteldrmfb frame buffer device
[ 34.885880] drm: registered panic notifier
[ 34.885884] Slow work thread pool: Starting up
[ 34.886647] Slow work thread pool: Ready
[ 34.886659] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 34.992057] Skipping EDID probe due to cached edid
[ 35.231881] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 35.505026] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 35.505068] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
[ 35.505078] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 35.505135] alloc irq_desc for 45 on node -1
[ 35.505137] alloc kstat_irqs on node -1
[ 35.505152] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 35.505186] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 37.816210] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 37.816218] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 37.816508] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 38.056129] Skipping EDID probe due to cached edid
[ 38.421880] Skipping EDID probe due to cached edid
[ 40.001055] Skipping EDID probe due to cached edid
[ 40.320066] Skipping EDID probe due to cached edid
[ 40.672074] Skipping EDID probe due to cached edid
[ 40.992073] Skipping EDID probe due to cached edid
[ 43.721970] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,commit=0
[ 48.048044] eth0: no IPv6 routers present
[ 51.693098] Skipping EDID probe due to cached edid
[ 52.012075] Skipping EDID probe due to cached edid
[ 52.332074] Skipping EDID probe due to cached edid
[ 53.856086] Skipping EDID probe due to cached edid
[ 55.173468] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 56.116036] ISOFS: changing to secondary root
[ 58.652097] Skipping EDID probe due to cached edid
[ 70.488087] usb 1-6: new high speed USB device using ehci_hcd and address 3
[ 116.736091] Skipping EDID probe due to cached edid
[ 117.056109] Skipping EDID probe due to cached edid
[ 2211.347558] usb 1-6: USB disconnect, address 3
[ 2213.960056] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 2250.520129] usb 3-2: USB disconnect, address 2
[ 2253.660053] usb 1-4: new high speed USB device using ehci_hcd and address 5
[ 2253.924335] dib0700: loaded with support for 14 different device-types
[ 2253.924439] dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware
[ 2253.961151] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 2254.171821] dib0700: firmware started successfully.
[ 2254.672238] dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
[ 2254.672340] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 2254.672473] DVB: registering new adapter (Gigabyte U8000-RH)
[ 2254.920591] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 2254.946121] xc2028 3-0061: creating new instance
[ 2254.946125] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[ 2254.946211] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/input/input8
[ 2254.946273] dvb-usb: schedule remote query interval to 50 msecs.
[ 2254.946277] dvb-usb: Gigabyte U8000-RH successfully initialized and connected.
[ 2254.946859] usbcore: registered new interface driver dvb_usb_dib0700
[ 2285.666030] usb 1-4: USB disconnect, address 5
[ 2285.692240] xc2028 3-0061: destroying instance
[ 2285.692640] dvb-usb: Gigabyte U8000-RH successfully deinitialized and disconnected.
[ 2290.393079] usb 3-2: new low speed USB device using uhci_hcd and address 3
[ 2290.596914] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input9
[ 2290.597064] generic-usb 0003:045E:0040.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2/input0
[10999.684113] Skipping EDID probe due to cached edid
[27024.112081] Skipping EDID probe due to cached edid
[52762.241835] usb 1-5: USB disconnect, address 4
[52852.205047] usb 1-6: new high speed USB device using ehci_hcd and address 7