FlyTV Prime 30 / 30FM

...hardware-drivers για περιφερειακά (εκτυπωτές, κάμερες, εξ. σκληροί, κλπ)
Κανόνες Δ. Συζήτησης
Για την ευκολότερη επίλυση του προβλήματός σας.
Καλό είναι να δημοσιεύσετε τα αποτελέσματα της εντολής στο τερματικό :
lsusb

FlyTV Prime 30 / 30FM

Δημοσίευσηαπό nikomas50 » 11 Φεβ 2011, 13:02

Έχω την κάρτα τηλεόρασης που αναφέρω στον τίτλο. http://www.lifeview.com.tw/html/product ... rime30.htm
Στο Mandriva λειτουργεί με το TVtime χωρίς κανένα απολύτως πρόβλημα.
Στο ubuntu 10.10, το οποίο εγκατέστησα πρόσφατα, ενώ η εικόνα λειτουργεί άψογα, δεν έχω έξοδο ήχου. (Η κάρτα τηλεόρασης συνδέεται με καλώδιο 3,5mm με την είσοδο Line In της κάρτας ήχου της Asus P5Q). Δοκίμασα και απ' ευθείας έξοδο σε ενεργά ηχεία και πάλι όμως ήχος δεν ακούγεται. Το πρόβλημα λοιπόν εντοπίζεται στην αδυναμία των οδηγών της κάρτας τηλεόρασης να δώσουν έξοδο ήχου, μόνο στο ubuntu. Από τη λίστα http://www.kernel.org/doc/Documentation ... ST.saa7134 έχω ήδη χρησιμοποιήσει τις επιλογές 0, 1, 10 και 42 (το τσιπ της κάρτας είναι το Philips saa7130) χωρίς αποτέλεσμα.
Αν κάποιος μπορεί να βοηθήσει, παρακαλώ να μου δώσει οδηγίες λαμβάνονας επί πλέον υπ' όψιν ότι είμαι χρήστης Linux μιας εβδομάδας (νεοφώτιστος).
Ευχαριστώ πολύ
Νίκος
Γνώσεις ⇛ Linux: Χαμηλό, Windows XP: Μέτριο, Windows Seven: Το ψάχνω┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Desktop με M/B Asus P5Q Deluxe: Ubuntu 12.04 32bit, Windows XP Greek 32bit, Windows Seven Ultimate Greek 64bit
Προδιαγραφές ⇛ Επεξεργαστής Intel Q6600│ Μνήμη: 4GB DDR2 800 MHz│ Κάρτα Γραφικών: nVidia 8600GT Silent│ Κάρτα Ήχου: Realtek On board│ Οθόνη & Ανάλυση: Dell U2412M @ 1920X1200
Άβαταρ μέλους
nikomas50
babeTUX
babeTUX
 
Δημοσιεύσεις: 12
Εγγραφή: 11 Φεβ 2011, 11:30
Τοποθεσία: Nea Smyrni
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό the_eye » 11 Φεβ 2011, 16:34

Δώσε το αποτέλεσμα της παρακάτω εντολής στο τερματικό.
Κώδικας: Επιλογή όλων
lspci -nn
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11723
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό nikomas50 » 12 Φεβ 2011, 09:33

05:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
Γνώσεις ⇛ Linux: Χαμηλό, Windows XP: Μέτριο, Windows Seven: Το ψάχνω┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Desktop με M/B Asus P5Q Deluxe: Ubuntu 12.04 32bit, Windows XP Greek 32bit, Windows Seven Ultimate Greek 64bit
Προδιαγραφές ⇛ Επεξεργαστής Intel Q6600│ Μνήμη: 4GB DDR2 800 MHz│ Κάρτα Γραφικών: nVidia 8600GT Silent│ Κάρτα Ήχου: Realtek On board│ Οθόνη & Ανάλυση: Dell U2412M @ 1920X1200
Άβαταρ μέλους
nikomas50
babeTUX
babeTUX
 
Δημοσιεύσεις: 12
Εγγραφή: 11 Φεβ 2011, 11:30
Τοποθεσία: Nea Smyrni
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό the_eye » 12 Φεβ 2011, 12:09

Δώσε το αποτέλεσμα ολόκληρο θέλω να δω αν έχει και audio κομμάτι ξεχωριστά.

Δοκίμασε και αυτή την εντολή αν θα έχεις ήχο.
sox --buffer 16000 -q -c 2 -s -r 32000 -t alsa hw:1 -t alsa hw:0 & tvtime && killall sox
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11723
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό nikomas50 » 12 Φεβ 2011, 14:50

Κώδικας: Επιλογή όλων
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e20] (rev 03)
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e21] (rev 03)
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 [8086:3a37]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 [8086:3a38]
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 [8086:3a39]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 [8086:3a3c]
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 [8086:3a40]
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 [8086:3a48]
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 [8086:3a4a]
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 [8086:3a34]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 [8086:3a35]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 [8086:3a36]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 [8086:3a3a]
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 90)
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller [8086:3a16]
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 [8086:3a20]
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus Controller [8086:3a30]
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 [8086:3a26]
01:00.0 VGA compatible controller [0300]: nVidia Corporation G84 [GeForce 8600 GT] [10de:0402] (rev a1)
02:00.0 Ethernet controller [0200]: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet [1969:1026] (rev b0)
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2)
05:00.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
05:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW322/323 [11c1:5811] (rev 70)
Τελευταία επεξεργασία από the_eye και 12 Φεβ 2011, 15:32, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Τον κώδικα τον βάζουμε μέσα σε [code]κώδικας[/code]
Γνώσεις ⇛ Linux: Χαμηλό, Windows XP: Μέτριο, Windows Seven: Το ψάχνω┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Desktop με M/B Asus P5Q Deluxe: Ubuntu 12.04 32bit, Windows XP Greek 32bit, Windows Seven Ultimate Greek 64bit
Προδιαγραφές ⇛ Επεξεργαστής Intel Q6600│ Μνήμη: 4GB DDR2 800 MHz│ Κάρτα Γραφικών: nVidia 8600GT Silent│ Κάρτα Ήχου: Realtek On board│ Οθόνη & Ανάλυση: Dell U2412M @ 1920X1200
Άβαταρ μέλους
nikomas50
babeTUX
babeTUX
 
Δημοσιεύσεις: 12
Εγγραφή: 11 Φεβ 2011, 11:30
Τοποθεσία: Nea Smyrni
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό nikomas50 » 12 Φεβ 2011, 15:09

Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /home/user/.tvtime/tvtime.xml
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
ALSA lib pcm_hw.c:1401:(_snd_pcm_hw_open) Invalid value for card
sox FAIL formats: can't open input `hw:1': snd_pcm_open error: No such file or directory
Γνώσεις ⇛ Linux: Χαμηλό, Windows XP: Μέτριο, Windows Seven: Το ψάχνω┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Desktop με M/B Asus P5Q Deluxe: Ubuntu 12.04 32bit, Windows XP Greek 32bit, Windows Seven Ultimate Greek 64bit
Προδιαγραφές ⇛ Επεξεργαστής Intel Q6600│ Μνήμη: 4GB DDR2 800 MHz│ Κάρτα Γραφικών: nVidia 8600GT Silent│ Κάρτα Ήχου: Realtek On board│ Οθόνη & Ανάλυση: Dell U2412M @ 1920X1200
Άβαταρ μέλους
nikomas50
babeTUX
babeTUX
 
Δημοσιεύσεις: 12
Εγγραφή: 11 Φεβ 2011, 11:30
Τοποθεσία: Nea Smyrni
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό nikomas50 » 12 Φεβ 2011, 15:33

Στα Downloads της ιστοσελίδας της ASUS P5Q υπάρχει ένας και μοναδικός οδηγός για την κάρτα ήχου για λειτουργικό Linux αλλά δε γνωρίζω με ποιο τρόπο γίνεται η εγκατάσταση οδηγών στο ubuntu.
http://www.asus.gr/product.aspx?P_ID=Bx ... templete=2
Γνώσεις ⇛ Linux: Χαμηλό, Windows XP: Μέτριο, Windows Seven: Το ψάχνω┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Desktop με M/B Asus P5Q Deluxe: Ubuntu 12.04 32bit, Windows XP Greek 32bit, Windows Seven Ultimate Greek 64bit
Προδιαγραφές ⇛ Επεξεργαστής Intel Q6600│ Μνήμη: 4GB DDR2 800 MHz│ Κάρτα Γραφικών: nVidia 8600GT Silent│ Κάρτα Ήχου: Realtek On board│ Οθόνη & Ανάλυση: Dell U2412M @ 1920X1200
Άβαταρ μέλους
nikomas50
babeTUX
babeTUX
 
Δημοσιεύσεις: 12
Εγγραφή: 11 Φεβ 2011, 11:30
Τοποθεσία: Nea Smyrni
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό the_eye » 12 Φεβ 2011, 15:35

Δώσε μας και το
Κώδικας: Επιλογή όλων
dmesg
Όσο λιγότερο κλειστό λογισμικό έχεις, τόσα λιγότερα προβλήματα.
1 Γνώσεις ⇛ Linux: Καλό ┃ Προγραμματισμός: Ναι PHP, MySQL ┃ Αγγλικά: Καλά
2 Ubuntu 24.04.2
3 Intel Core i5-6500 CPU @ 3.20GHz ‖ RAM 7836 MiB ‖ Gigabyte B150M-HD3 DDR3-CF - Gigabyte B150M-HD3 DDR3
4 Intel HD Graphics 530 [8086:1912] {i915}
5 enp1s0: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 15)
Άβαταρ μέλους
the_eye
Διαχειριστής
Διαχειριστής
 
Δημοσιεύσεις: 11723
Εγγραφή: 16 Μαρ 2010, 17:19
Launchpad: ntoulasd
IRC: the_eye_
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό nikomas50 » 12 Φεβ 2011, 15:53

Κώδικας: Επιλογή όλων
[ 0.452802] pci 0000:00:1e.0: setting latency timer to 64
[ 0.452806] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.452809] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.452811] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.452813] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.452815] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.452818] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.452820] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.452822] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe8fffff]
[ 0.452825] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.452827] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
[ 0.452829] pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf03fffff]
[ 0.452831] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.452834] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.452836] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.452838] pci_bus 0000:03: resource 2 [mem 0xf0400000-0xf05fffff 64bit pref]
[ 0.452840] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.452842] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.452845] pci_bus 0000:02: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
[ 0.452847] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.452849] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
[ 0.452851] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
[ 0.452853] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.452856] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.452858] pci_bus 0000:05: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.452860] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.452890] NET: Registered protocol family 2
[ 0.452947] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.453155] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.453489] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.453641] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.453643] TCP reno registered
[ 0.453646] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.453654] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.453722] NET: Registered protocol family 1
[ 0.453875] pci 0000:01:00.0: Boot video device
[ 0.453888] PCI: CLS 32 bytes, default 64
[ 0.454135] cpufreq-nforce2: No nForce2 chipset.
[ 0.454164] Scanning for low memory corruption every 60 seconds
[ 0.454257] audit: initializing netlink socket (disabled)
[ 0.454264] type=2000 audit(1297519599.448:1): initialized
[ 0.464052] highmem bounce pool size: 64 pages
[ 0.464056] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.465357] VFS: Disk quotas dquot_6.5.2
[ 0.465411] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.465926] fuse init (API version 7.14)
[ 0.466005] msgmni has been set to 1618
[ 0.466287] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.466290] io scheduler noop registered
[ 0.466292] io scheduler deadline registered
[ 0.466303] io scheduler cfq registered (default)
[ 0.466404] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.466426] alloc irq_desc for 40 on node -1
[ 0.466428] alloc kstat_irqs on node -1
[ 0.466436] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.466489] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.466518] alloc irq_desc for 41 on node -1
[ 0.466519] alloc kstat_irqs on node -1
[ 0.466526] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.466600] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.466630] alloc irq_desc for 42 on node -1
[ 0.466632] alloc kstat_irqs on node -1
[ 0.466638] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
[ 0.466712] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.466740] alloc irq_desc for 43 on node -1
[ 0.466742] alloc kstat_irqs on node -1
[ 0.466748] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
[ 0.466837] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.466928] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.467015] intel_idle: MWAIT substates: 0x20
[ 0.467017] intel_idle: does not run on family 6 model 15
[ 0.467103] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.467109] ACPI: Power Button [PWRB]
[ 0.467151] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.467154] ACPI: Power Button [PWRF]
[ 0.467421] ACPI: acpi_idle registered with cpuidle
[ 0.471029] ERST: Table is not found!
[ 0.471134] isapnp: Scanning for PnP cards...
[ 0.471271] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.471366] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.471746] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.472863] brd: module loaded
[ 0.473353] loop: module loaded
[ 0.473524] ata_piix 0000:00:1f.2: version 2.13
[ 0.473537] alloc irq_desc for 19 on node -1
[ 0.473539] alloc kstat_irqs on node -1
[ 0.473544] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.473548] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.473585] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.473636] scsi0 : ata_piix
[ 0.473699] scsi1 : ata_piix
[ 0.475451] ata1: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 19
[ 0.475457] ata2: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 19
[ 0.475477] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.475481] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.475512] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.475543] scsi2 : ata_piix
[ 0.475594] scsi3 : ata_piix
[ 0.476921] ata3: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.476925] ata4: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.476977] pata_acpi 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.477002] pata_acpi 0000:03:00.0: setting latency timer to 64
[ 0.477014] pata_acpi 0000:03:00.0: PCI INT A disabled
[ 0.477281] Fixed MDIO Bus: probed
[ 0.477310] PPP generic driver version 2.4.2
[ 0.477344] tun: Universal TUN/TAP device driver, 1.6
[ 0.477346] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.477420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.477434] alloc irq_desc for 18 on node -1
[ 0.477436] alloc kstat_irqs on node -1
[ 0.477440] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.477451] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.477454] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.477483] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.477506] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.481394] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.481406] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.495943] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.496045] hub 1-0:1.0: USB hub found
[ 0.496050] hub 1-0:1.0: 6 ports detected
[ 0.496116] alloc irq_desc for 23 on node -1
[ 0.496118] alloc kstat_irqs on node -1
[ 0.496122] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.496131] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.496135] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.496163] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.496182] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.500073] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.500087] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.516005] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.516102] hub 2-0:1.0: USB hub found
[ 0.516106] hub 2-0:1.0: 6 ports detected
[ 0.516171] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.516184] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.516200] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.516205] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.516208] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.516239] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.516268] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 0.516370] hub 3-0:1.0: USB hub found
[ 0.516373] hub 3-0:1.0: 2 ports detected
[ 0.516434] alloc irq_desc for 21 on node -1
[ 0.516436] alloc kstat_irqs on node -1
[ 0.516440] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.516445] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.516448] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.516477] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.516505] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 0.516607] hub 4-0:1.0: USB hub found
[ 0.516611] hub 4-0:1.0: 2 ports detected
[ 0.516664] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.516669] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.516672] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.516701] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.516721] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
[ 0.516820] hub 5-0:1.0: USB hub found
[ 0.516824] hub 5-0:1.0: 2 ports detected
[ 0.516877] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.516882] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.516885] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.516912] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.516934] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 0.517031] hub 6-0:1.0: USB hub found
[ 0.517034] hub 6-0:1.0: 2 ports detected
[ 0.517088] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.517093] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.517096] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.517124] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.517144] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 0.517248] hub 7-0:1.0: USB hub found
[ 0.517251] hub 7-0:1.0: 2 ports detected
[ 0.517304] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.517309] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.517312] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.517340] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.517360] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 0.517457] hub 8-0:1.0: USB hub found
[ 0.517461] hub 8-0:1.0: 2 ports detected
[ 0.517581] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 0.517584] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 0.520149] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.520156] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.520208] mice: PS/2 mouse device common for all mice
[ 0.520303] rtc_cmos 00:03: RTC can wake from S4
[ 0.520334] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.520356] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.520444] device-mapper: uevent: version 1.0.3
[ 0.520622] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.520742] device-mapper: multipath: version 1.1.1 loaded
[ 0.520745] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.520869] EISA: Probing bus 0 at eisa.0
[ 0.520873] EISA: Cannot allocate resource for mainboard
[ 0.520875] Cannot allocate resource for EISA slot 1
[ 0.520877] Cannot allocate resource for EISA slot 2
[ 0.520879] Cannot allocate resource for EISA slot 3
[ 0.520880] Cannot allocate resource for EISA slot 4
[ 0.520882] Cannot allocate resource for EISA slot 5
[ 0.520884] Cannot allocate resource for EISA slot 6
[ 0.520886] Cannot allocate resource for EISA slot 7
[ 0.520887] Cannot allocate resource for EISA slot 8
[ 0.520889] EISA: Detected 0 cards.
[ 0.521038] cpuidle: using governor ladder
[ 0.521040] cpuidle: using governor menu
[ 0.521330] TCP cubic registered
[ 0.521454] NET: Registered protocol family 10
[ 0.521792] lo: Disabled Privacy Extensions
[ 0.522002] NET: Registered protocol family 17
[ 0.523444] Using IPI No-Shortcut mode
[ 0.523517] PM: Resume from disk failed.
[ 0.523527] registered taskstats version 1
[ 0.523828] Magic number: 15:424:131
[ 0.523884] acpi device:06: hash matches
[ 0.523887] acpi PNP0C02:03: hash matches
[ 0.523919] rtc_cmos 00:03: setting system clock to 2011-02-12 14:06:39 UTC (1297519599)
[ 0.523922] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.523924] EDD information not available.
[ 0.573157] Freeing initrd memory: 10484k freed
[ 0.807242] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.817788] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.824281] isapnp: No Plug & Play device found
[ 0.872848] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 1.009343] hub 2-2:1.0: USB hub found
[ 1.009422] hub 2-2:1.0: 2 ports detected
[ 1.288110] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.288125] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.288297] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.288307] ata2.01: SATA link down (SStatus 0 SControl 300)
[ 1.304542] ata1.00: ATA-8: ST3500320AS, SD15, max UDMA/133
[ 1.304546] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.304590] ata1.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN03, max UDMA/100
[ 1.320557] ata1.00: configured for UDMA/133
[ 1.330434] ata2.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
[ 1.330439] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.336165] ata1.01: configured for UDMA/100
[ 1.341629] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD15 PQ: 0 ANSI: 5
[ 1.341762] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.341775] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.341891] sd 0:0:0:0: [sda] Write Protect is off
[ 1.341894] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.343159] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.344770] scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN03 PQ: 0 ANSI: 5
[ 1.348785] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.348790] Uniform CD-ROM driver Revision: 3.20
[ 1.348852] sda:
[ 1.348906] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.348946] sr 0:0:1:0: Attached scsi generic sg1 type 5
[ 1.355721] sda1 sda2
[ 1.355948] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.397101] ata2.00: configured for UDMA/133
[ 1.397216] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
[ 1.397326] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.397341] sd 1:0:0:0: Attached scsi generic sg2 type 0
[ 1.397377] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.397380] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.397404] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.397558] sdb:
[ 1.404019] usb 8-1: new full speed USB device using uhci_hcd and address 2
[ 1.436752] sdb1 sdb2 < sdb5 sdb6 >
[ 1.465303] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.465316] Freeing unused kernel memory: 708k freed
[ 1.465620] Write protecting the kernel text: 5092k
[ 1.465709] Write protecting the kernel read-only data: 2012k
[ 1.481409] udev[107]: starting version 163
[ 1.506823] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.506838] ATL1E 0000:02:00.0: setting latency timer to 64
[ 1.533709] ahci 0000:03:00.0: version 3.0
[ 1.534951] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.534985] pata_marvell 0000:03:00.0: setting latency timer to 64
[ 1.538322] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.541558] scsi4 : pata_marvell
[ 1.545118] scsi5 : pata_marvell
[ 1.545183] ata5: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 16
[ 1.545185] ata6: PATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 16
[ 1.625032] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0
[ 1.716952] ata5.00: ATA-4: ST320414A, 3.28, max UDMA/100
[ 1.716956] ata5.00: 39102336 sectors, multi 0: LBA
[ 1.717873] ata5.01: ATA-5: WDC WD400BB-00DEA0, 05.03E05, max UDMA/100
[ 1.717877] ata5.01: 78165360 sectors, multi 0: LBA
[ 1.732921] ata5.00: configured for UDMA/100
[ 1.749817] ata5.01: configured for UDMA/100
[ 1.749922] scsi 4:0:0:0: Direct-Access ATA ST320414A 3.28 PQ: 0 ANSI: 5
[ 1.750052] sd 4:0:0:0: [sdc] 39102336 512-byte logical blocks: (20.0 GB/18.6 GiB)
[ 1.750081] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 1.750121] sd 4:0:0:0: [sdc] Write Protect is off
[ 1.750124] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.750158] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.750212] scsi 4:0:1:0: Direct-Access ATA WDC WD400BB-00DE 05.0 PQ: 0 ANSI: 5
[ 1.750364] sd 4:0:1:0: [sdd] 78165360 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.750372] sd 4:0:1:0: Attached scsi generic sg4 type 0
[ 1.750435] sdc:
[ 1.761657] sd 4:0:1:0: [sdd] Write Protect is off
[ 1.761662] sd 4:0:1:0: [sdd] Mode Sense: 00 3a 00 00
[ 1.761667] sdc1 sdc2 < sdc5
[ 1.773074] sd 4:0:1:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.773087] sdc6 sdc7 >
[ 1.789919] sdd: sdd1 sdd2 <
[ 1.824523] usb 8-2: new low speed USB device using uhci_hcd and address 3
[ 1.836262] sdd5 sdd6 >
[ 1.850976] sd 4:0:0:0: [sdc] Attached SCSI disk
[ 1.851206] sd 4:0:1:0: [sdd] Attached SCSI disk
[ 2.023139] usbcore: registered new interface driver hiddev
[ 2.037012] input: Microsoft Microsoft® Digital Media oard 3000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2
[ 2.037088] generic-usb 0003:045E:0732.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Microsoft® Digital Media oard 3000] on usb-0000:00:1d.2-2/input0
[ 2.067672] input: Microsoft Microsoft® Digital Media oard 3000 as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.1/input/input3
[ 2.067725] generic-usb 0003:045E:0732.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Microsoft® Digital Media oard 3000] on usb-0000:00:1d.2-2/input1
[ 2.067740] usbcore: registered new interface driver usbhid
[ 2.067742] usbhid: USB HID core driver
[ 2.117110] firewire_core: created device fw0: GUID 001e8c00015beb71, S400
[ 2.755460] EXT4-fs (sdc6): mounted filesystem with ordered data mode. Opts: (null)
[ 18.484439] udev[397]: starting version 163
[ 18.493957] lp: driver loaded but no devices found
[ 18.515918] Linux agpgart interface v0.103
[ 18.579059] Adding 261116k swap on /dev/sdc7. Priority:-1 extents:1 across:261116k
[ 18.617670] IR NEC protocol handler initialized
[ 18.633361] nvidia: module license 'NVIDIA' taints kernel.
[ 18.633364] Disabling lock debugging due to kernel taint
[ 18.635251] Linux video capture interface: v2.00
[ 18.636432] Bluetooth: Core ver 2.15
[ 18.636470] NET: Registered protocol family 31
[ 18.636472] Bluetooth: HCI device and connection manager initialized
[ 18.636475] Bluetooth: HCI socket layer initialized
[ 18.647769] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 18.652971] usbcore: registered new interface driver btusb
[ 18.658517] IR RC5(x) protocol handler initialized
[ 18.665116] IR RC6 protocol handler initialized
[ 18.667878] IR JVC protocol handler initialized
[ 18.671608] IR Sony protocol handler initialized
[ 18.675312] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 18.675355] saa7134 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 18.675361] saa7130[0]: found at 0000:05:00.0, rev: 1, irq: 16, latency: 64, mmio: 0xfebffc00
[ 18.675367] saa7130[0]: subsystem: 5168:0138, board: LifeView/Typhoon FlyVIDEO2000 [card=3,autodetected]
[ 18.675385] saa7130[0]: board init: gpio is 39000
[ 18.675388] saa7130[0]: there are different flyvideo cards with different tuners
[ 18.675389] saa7130[0]: out there, you might have to use the tuner=<nr> insmod
[ 18.675390] saa7130[0]: option to override the default value.
[ 18.683091] lirc_dev: IR Remote Control driver registered, major 249
[ 18.685134] IR LIRC bridge handler initialized
[ 18.700507] Registered IR keymap rc-flyvideo
[ 18.700602] input: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/rc/rc0/input4
[ 18.700652] rc0: saa7134 IR (LifeView/Typhoon Fl as /devices/pci0000:00/0000:00:1e.0/0000:05:00.0/rc/rc0
[ 18.724693] alloc irq_desc for 22 on node -1
[ 18.724696] alloc kstat_irqs on node -1
[ 18.724703] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 18.724742] alloc irq_desc for 44 on node -1
[ 18.724744] alloc kstat_irqs on node -1
[ 18.724752] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 18.724775] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 18.756327] type=1400 audit(1297512417.728:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=694 comm="apparmor_parser"
[ 18.756438] type=1400 audit(1297512417.728:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=685 comm="apparmor_parser"
[ 18.756947] type=1400 audit(1297512417.728:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=694 comm="apparmor_parser"
[ 18.757061] type=1400 audit(1297512417.728:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=685 comm="apparmor_parser"
[ 18.757284] type=1400 audit(1297512417.728:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=694 comm="apparmor_parser"
[ 18.757400] type=1400 audit(1297512417.728:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=685 comm="apparmor_parser"
[ 18.778842] psmouse serio1: ID: 10 00 64
[ 18.852506] saa7130[0]: i2c eeprom 00: 68 51 38 01 10 28 ff ff ff ff ff ff ff ff ff ff
[ 18.852517] saa7130[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852527] saa7130[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852536] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852545] saa7130[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852555] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852564] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852574] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852583] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852592] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852602] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852611] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852620] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852630] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852639] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.852649] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 18.860596] tuner 0-0061: chip found @ 0xc2 (saa7130[0])
[ 18.868506] tuner-simple 0-0061: creating new instance
[ 18.868509] tuner-simple 0-0061: type set to 37 (LG PAL (newer TAPC series))
[ 18.892650] saa7130[0]: registered device video0 [v4l2]
[ 18.892742] saa7130[0]: registered device vbi0
[ 18.892819] saa7130[0]: registered device radio0
[ 18.897366] saa7134 ALSA driver for DMA sound loaded
[ 18.897370] saa7130[0]/alsa: LifeView/Typhoon FlyVIDEO2000 doesn't support digital audio
[ 19.414902] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[ 19.565208] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 19.565217] nvidia 0000:01:00.0: setting latency timer to 64
[ 19.565222] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 19.565428] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 20.012813] EXT4-fs (sdc6): re-mounted. Opts: errors=remount-ro
[ 20.143068] type=1400 audit(1297512419.116:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=996 comm="apparmor_parser"
[ 20.143682] type=1400 audit(1297512419.116:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=996 comm="apparmor_parser"
[ 20.143776] type=1400 audit(1297512419.116:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=995 comm="apparmor_parser"
[ 20.144040] type=1400 audit(1297512419.116:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 20.160905] alloc irq_desc for 45 on node -1
[ 20.160909] alloc kstat_irqs on node -1
[ 20.160923] ATL1E 0000:02:00.0: irq 45 for MSI/MSI-X
[ 20.161043] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 20.161165] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.161322] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.046481] Bluetooth: L2CAP ver 2.14
[ 21.046483] Bluetooth: L2CAP socket layer initialized
[ 21.050833] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.050836] Bluetooth: BNEP filters: protocol multicast
[ 21.054620] Bluetooth: SCO (Voice Link) ver 0.6
[ 21.054622] Bluetooth: SCO socket layer initialized
[ 21.318357] Bluetooth: RFCOMM TTY layer initialized
[ 21.318362] Bluetooth: RFCOMM socket layer initialized
[ 21.318364] Bluetooth: RFCOMM ver 1.11
[ 21.993327] EXT4-fs (sdc6): re-mounted. Opts: errors=remount-ro,commit=0
[ 23.642273] ppdev: user-space parallel port driver
[ 27.567512] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 27.592211] EXT4-fs (sdc6): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.631915] ISO 9660 Extensions: RRIP_1991A
[ 31.040529] eth0: no IPv6 routers present
[ 561.840258] lo: Disabled Privacy Extensions
[ 758.809108] lo: Disabled Privacy Extensions
[ 1362.459396] lo: Disabled Privacy Extensions
[ 1793.179061] lo: Disabled Privacy Extensions
[ 2071.537349] non-accessible hardlink creation was attempted by: cp (fsuid 1000)
[ 2071.538019] non-accessible hardlink creation was attempted by: cp (fsuid 1000)
[ 2277.512871] non-accessible hardlink creation was attempted by: cp (fsuid 1000)
[ 2277.513498] non-accessible hardlink creation was attempted by: cp (fsuid 1000)
[ 2636.811385] lo: Disabled Privacy Extensions
[ 2637.025603] lo: Disabled Privacy Extensions
Τελευταία επεξεργασία από the_eye και 12 Φεβ 2011, 15:59, έχει επεξεργασθεί 1 φορά/ες συνολικά
Αιτία: Τον κώδικα τον βάζουμε μέσα σε [code]κώδικας[/code] είναι το κουμπάκι <> δίπλα από το λαμπάκι.
Γνώσεις ⇛ Linux: Χαμηλό, Windows XP: Μέτριο, Windows Seven: Το ψάχνω┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Desktop με M/B Asus P5Q Deluxe: Ubuntu 12.04 32bit, Windows XP Greek 32bit, Windows Seven Ultimate Greek 64bit
Προδιαγραφές ⇛ Επεξεργαστής Intel Q6600│ Μνήμη: 4GB DDR2 800 MHz│ Κάρτα Γραφικών: nVidia 8600GT Silent│ Κάρτα Ήχου: Realtek On board│ Οθόνη & Ανάλυση: Dell U2412M @ 1920X1200
Άβαταρ μέλους
nikomas50
babeTUX
babeTUX
 
Δημοσιεύσεις: 12
Εγγραφή: 11 Φεβ 2011, 11:30
Τοποθεσία: Nea Smyrni
Εκτύπωση

Re: FlyTV Prime 30 / 30FM

Δημοσίευσηαπό nikomas50 » 16 Φεβ 2011, 11:20

Τελικά δεν μπορεί να γίνει τίποτα με την περίπτωσή μου;
Γνώσεις ⇛ Linux: Χαμηλό, Windows XP: Μέτριο, Windows Seven: Το ψάχνω┃ Προγραμματισμός: Όχι ┃ Αγγλικά: Λίγα
Λειτουργικά σε Desktop με M/B Asus P5Q Deluxe: Ubuntu 12.04 32bit, Windows XP Greek 32bit, Windows Seven Ultimate Greek 64bit
Προδιαγραφές ⇛ Επεξεργαστής Intel Q6600│ Μνήμη: 4GB DDR2 800 MHz│ Κάρτα Γραφικών: nVidia 8600GT Silent│ Κάρτα Ήχου: Realtek On board│ Οθόνη & Ανάλυση: Dell U2412M @ 1920X1200
Άβαταρ μέλους
nikomas50
babeTUX
babeTUX
 
Δημοσιεύσεις: 12
Εγγραφή: 11 Φεβ 2011, 11:30
Τοποθεσία: Nea Smyrni
Εκτύπωση

Επόμενο

Επιστροφή στο Περιφερειακά