πρόβλλημα με ποντίκι δεν ανταποκρίνεται

[Χρήστος]

καλησπέρα, έχω ένα laptop
Προδιαγραφές: Intel core i3
Κάρτα γραφικών: AMD Radeon HD6370M
Κάρτα δικτύου: Broadcom NetLink (TM) Gigabit Ethernet
Εχω εγκαταστήσει το ubuntu 11.10

Στο οποίο έχω συνδέσει μέσω usb ένα ποντίκι, Στην αρχή δούλευε κανονικά μετά από λίγο καιρό όμως δημιούργησε πρόβλημα, άλλες φορές λειτουργεί, άλλες όχι, μερικές φορές εκεί που δουλεύει ξαφνικά σταματάει. Πρέπει να σημειώσω ότι στα windows δουλεύει κανονικά. Μπορείτε να μου πείτε τι πρέπει να κάνω.

Ευχαριστώ εκ των προτέρων

[simosx]

Στο οποίο έχω συνδέσει μέσω usb ένα ποντίκι, Στην αρχή δούλευε κανονικά μετά από λίγο καιρό όμως δημιούργησε πρόβλημα, άλλες φορές λειτουργεί, άλλες όχι, μερικές φορές εκεί που δουλεύει ξαφνικά σταματάει. Πρέπει να σημειώσω ότι στα windows δουλεύει κανονικά. Μπορείτε να μου πείτε τι πρέπει να κάνω.

Είναι εξαιρετικά παράξενο να λειτουργεί με προβληματικό τρόπο το ποντίκι στο Linux.
Αυτό που προτείνω είναι να δοκιμάσεις, ενδεχομένως και με LiveUSB/LiveCD, το Ubuntu 12.04 για να δεις αν εμφανίζει και εκεί το πρόβλημα.
Γενικά τα ποντίκια είναι απλές συσκευές για να παρουσιάζουν παράξενη συμπεριφορά σε ένα μόνο λειτουργικό σύστημα.
Οπότε, αν δεν είναι πρόβλημα κάπου στον πυρήνα ή στον X.Org, τότε θα καταφέρουμε να το διαπιστώσουμε.

[Χρήστος]

όταν βάζω το ποντίκι στον επιτραπέζιο υπολογιστή δουλεύει κανονικά, το ίδιο συμβαίνει όμως όταν βάζω το ποντίκι του επιτραπέζιου υπολογιστή στο laptop, κι εκείνο δουλεύει κανονικά.
Πρέπει να σημειώσω ότι στα windows πριν μία δύο ημέρες έκανα ένα έλεγχο σχετικά με το ποντίκι και μου έβγαλε μήνυμα ότι το ποντίκι λειτουργεί κανονικά και ότι υπήρχε κάποιο πρόβληλμα με το usb το οποίο τα windows έλεισαν.
Εκείνο που διαπυστώνω το φως στο ποντίκι δεν έχει πολύ δύναμη σχεδόν τρεμοσβήνει.

[simosx]

Πρέπει να σημειώσω ότι στα windows πριν μία δύο ημέρες έκανα ένα έλεγχο σχετικά με το ποντίκι και μου έβγαλε μήνυμα ότι το ποντίκι λειτουργεί κανονικά και ότι υπήρχε κάποιο πρόβληλμα με το usb το οποίο τα windows έλεισαν.
Εκείνο που διαπυστώνω το φως στο ποντίκι δεν έχει πολύ δύναμη σχεδόν τρεμοσβήνει.

Ενδεχομένως να είναι πρόβλημα με το καλώδιο του ποντικιού, και συγκεκριμένα να έχει αρχίσει να φθείρεται.
Οπότε, ο υπολογιστής μπορεί να βλέπει τη συσκευή να επανασυνδέεται πολύ γρήγορα μόνο και μόνο επειδή μετακινείς το ποντίκι.
Αν είναι κάτι τέτοιο, πατάς dmesg μετά από χρήση του ποντικιού (όπου βλέπεις το πρόβλημα να παρουσιάζεται), και στέλνεις τις γραμμές αυτές εδώ για επιβεβαίωση.

[Χρήστος]

Κώδικας: Επιλογή όλων


[ 1.273648] pnp 00:05: [io 0x0400-0x047f]
[ 1.273650] pnp 00:05: [io 0x0500-0x057f]
[ 1.273651] pnp 00:05: [io 0x164e-0x164f]
[ 1.273664] pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
[ 1.273707] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.273710] system 00:05: [io 0xff2c-0xff2f] has been reserved
[ 1.273712] system 00:05: [io 0x0800-0x080f] has been reserved
[ 1.273714] system 00:05: [io 0xffff] has been reserved
[ 1.273716] system 00:05: [io 0xffff] has been reserved
[ 1.273718] system 00:05: [io 0x0400-0x047f] has been reserved
[ 1.273720] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.273723] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.273731] pnp 00:06: [io 0x0070-0x0077]
[ 1.273736] pnp 00:06: [irq 8]
[ 1.273759] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.273779] pnp 00:07: [io 0x0060]
[ 1.273781] pnp 00:07: [io 0x0064]
[ 1.273786] pnp 00:07: [irq 1]
[ 1.273810] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.273837] pnp 00:08: [irq 12]
[ 1.273864] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.274124] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
[ 1.274126] pnp 00:09: [mem 0xfed10000-0xfed13fff]
[ 1.274128] pnp 00:09: [mem 0xfed18000-0xfed18fff]
[ 1.274130] pnp 00:09: [mem 0xfed19000-0xfed19fff]
[ 1.274131] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 1.274133] pnp 00:09: [mem 0xb4200000-0xb4200fff]
[ 1.274135] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
[ 1.274137] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
[ 1.274138] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
[ 1.274140] pnp 00:09: [mem 0xff000000-0xffffffff]
[ 1.274141] pnp 00:09: [mem 0xfee00000-0xfeefffff]
[ 1.274195] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.274198] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.274200] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.274202] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.274204] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.274207] system 00:09: [mem 0xb4200000-0xb4200fff] has been reserved
[ 1.274209] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.274211] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.274213] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.274215] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.274218] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.274320] pnp 00:0a: [bus ff]
[ 1.274359] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 1.274372] pnp: PnP ACPI: found 11 devices
[ 1.274374] ACPI: ACPI bus type pnp unregistered
[ 1.274376] PnPBIOS: Disabled by ACPI PNP
[ 1.310790] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]
[ 1.310840] pci 0000:01:00.0: BAR 6: assigned [mem 0xb4040000-0xb405ffff pref]
[ 1.310843] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.310846] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 1.310849] pci 0000:00:01.0: bridge window [mem 0xb4000000-0xb40fffff]
[ 1.310852] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.310856] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.310859] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.310865] pci 0000:00:1c.0: bridge window [mem 0xb3000000-0xb3ffffff]
[ 1.310870] pci 0000:00:1c.0: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 1.310878] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.310881] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 1.310887] pci 0000:00:1c.1: bridge window [mem 0xb2000000-0xb2ffffff]
[ 1.310892] pci 0000:00:1c.1: bridge window [mem 0xb1000000-0xb1ffffff 64bit pref]
[ 1.310899] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 1.310946] pci 0000:00:1e.0: setting latency timer to 64
[ 1.310951] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.310952] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.310954] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.310956] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfebfffff]
[ 1.310958] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 1.310960] pci_bus 0000:01: resource 1 [mem 0xb4000000-0xb40fffff]
[ 1.310962] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.310964] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 1.310966] pci_bus 0000:02: resource 1 [mem 0xb3000000-0xb3ffffff]
[ 1.310967] pci_bus 0000:02: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 1.310969] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 1.310971] pci_bus 0000:03: resource 1 [mem 0xb2000000-0xb2ffffff]
[ 1.310973] pci_bus 0000:03: resource 2 [mem 0xb1000000-0xb1ffffff 64bit pref]
[ 1.310975] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 1.310977] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 1.310979] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.310980] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfebfffff]
[ 1.311012] NET: Registered protocol family 2
[ 1.311063] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.311172] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.311374] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.311475] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.311477] TCP: reno registered
[ 1.311479] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.311484] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.311534] NET: Registered protocol family 1
[ 1.341343] pci 0000:01:00.0: Boot video device
[ 1.341432] PCI: CLS 64 bytes, default 64
[ 1.341491] Simple Boot Flag at 0x44 set to 0x1
[ 1.341954] audit: initializing netlink socket (disabled)
[ 1.341969] type=2000 audit(1360003751.072:1): initialized
[ 1.362755] highmem bounce pool size: 64 pages
[ 1.362765] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.364612] VFS: Disk quotas dquot_6.5.2
[ 1.364653] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.365116] fuse init (API version 7.19)
[ 1.365198] msgmni has been set to 1652
[ 1.365666] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.365694] io scheduler noop registered
[ 1.365696] io scheduler deadline registered (default)
[ 1.365702] io scheduler cfq registered
[ 1.365811] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.365965] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.365982] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.366023] intel_idle: MWAIT substates: 0x1120
[ 1.366024] intel_idle: v0.4 model 0x25
[ 1.366025] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.340817] Refined TSC clocksource calibration: 2526.999 MHz.
[ 2.340826] Switching to clocksource tsc
[ 2.364823] ACPI: AC Adapter [AC] (on-line)
[ 2.364931] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C0C:00/input/input0
[ 2.364936] ACPI: Power Button [PWRB]
[ 2.364970] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C0D:00/input/input1
[ 2.364998] ACPI: Lid Switch [LID0]
[ 2.365054] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:11/PNP0C0E:00/input/input2
[ 2.365072] ACPI: Sleep Button [SLPB]
[ 2.365111] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.365115] ACPI: Power Button [PWRF]
[ 2.365209] ACPI: Requesting acpi_cpufreq
[ 2.765405] ACPI: Battery Slot [BAT0] (battery present)
[ 2.765436] GHES: HEST is not enabled!
[ 2.765480] isapnp: Scanning for PnP cards...
[ 2.765505] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.766713] Linux agpgart interface v0.103
[ 2.768005] brd: module loaded
[ 2.768634] loop: module loaded
[ 2.768723] ahci 0000:00:1f.2: version 3.0
[ 2.768779] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 2.768813] ahci: SSS flag set, parallel bus scan disabled
[ 2.768851] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.768854] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 2.768859] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.776806] scsi0 : ahci
[ 2.776866] scsi1 : ahci
[ 2.776914] scsi2 : ahci
[ 2.776963] scsi3 : ahci
[ 2.776999] ata1: SATA max UDMA/133 abar m2048@0xb4105000 port 0xb4105100 irq 41
[ 2.777002] ata2: SATA max UDMA/133 abar m2048@0xb4105000 port 0xb4105180 irq 41
[ 2.777003] ata3: DUMMY
[ 2.777004] ata4: DUMMY
[ 2.777269] Fixed MDIO Bus: probed
[ 2.777305] tun: Universal TUN/TAP device driver, 1.6
[ 2.777306] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.777346] PPP generic driver version 2.4.2
[ 2.777382] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.777412] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.777416] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.777421] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.777448] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.781354] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.781370] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xb4105c00
[ 2.792542] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.792570] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.792572] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.792574] usb usb1: Product: EHCI Host Controller
[ 2.792576] usb usb1: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
[ 2.792577] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.792688] hub 1-0:1.0: USB hub found
[ 2.792692] hub 1-0:1.0: 2 ports detected
[ 2.792754] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.792758] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.792762] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.792785] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.796664] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.796682] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xb4105800
[ 2.808532] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.808548] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.808551] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.808553] usb usb2: Product: EHCI Host Controller
[ 2.808556] usb usb2: Manufacturer: Linux 3.5.0-23-generic ehci_hcd
[ 2.808559] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.808650] hub 2-0:1.0: USB hub found
[ 2.808653] hub 2-0:1.0: 2 ports detected
[ 2.808699] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.808713] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.808755] usbcore: registered new interface driver libusual
[ 2.808788] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 2.826341] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.826346] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.826437] mousedev: PS/2 mouse device common for all mice
[ 2.827783] rtc_cmos 00:06: RTC can wake from S4
[ 2.827903] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.827935] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 2.827976] device-mapper: uevent: version 1.0.3
[ 2.828027] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.828051] EISA: Probing bus 0 at eisa.0
[ 2.828053] EISA: Cannot allocate resource for mainboard
[ 2.828054] Cannot allocate resource for EISA slot 1
[ 2.828055] Cannot allocate resource for EISA slot 2
[ 2.828056] Cannot allocate resource for EISA slot 3
[ 2.828057] Cannot allocate resource for EISA slot 4
[ 2.828058] Cannot allocate resource for EISA slot 5
[ 2.828059] Cannot allocate resource for EISA slot 6
[ 2.828060] Cannot allocate resource for EISA slot 7
[ 2.828061] Cannot allocate resource for EISA slot 8
[ 2.828063] EISA: Detected 0 cards.
[ 2.828128] cpuidle: using governor ladder
[ 2.828207] cpuidle: using governor menu
[ 2.828209] EFI Variables Facility v0.08 2004-May-17
[ 2.828418] ashmem: initialized
[ 2.828530] TCP: cubic registered
[ 2.828726] NET: Registered protocol family 10
[ 2.829105] NET: Registered protocol family 17
[ 2.829122] Key type dns_resolver registered
[ 2.829260] Using IPI No-Shortcut mode
[ 2.829485] PM: Hibernation image not present or could not be loaded.
[ 2.829505] registered taskstats version 1
[ 2.834466] Key type trusted registered
[ 2.837630] Key type encrypted registered
[ 2.842345] Magic number: 1:970:846
[ 2.842466] rtc_cmos 00:06: setting system clock to 2013-02-04 18:49:13 UTC (1360003753)
[ 2.843750] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.843751] EDD information not available.
[ 2.845171] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 3.096439] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.097667] ata1.00: ATA-8: WDC WD3200BPVT-22ZEST0, 01.01A01, max UDMA/133
[ 3.097670] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 3.098972] ata1.00: configured for UDMA/133
[ 3.104424] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 3.127437] isapnp: No Plug & Play device found
[ 3.127725] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BPVT-2 01.0 PQ: 0 ANSI: 5
[ 3.127915] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.127921] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 3.127924] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.128000] sd 0:0:0:0: [sda] Write Protect is off
[ 3.128003] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.128026] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.204521] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 3.205687] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.236850] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.236855] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.237157] hub 1-1:1.0: USB hub found
[ 3.237359] hub 1-1:1.0: 6 ports detected
[ 3.348307] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 3.444268] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.446905] ata2.00: ATAPI: HL-DT-STDVDRAM GT32N, 1.00, max UDMA/100
[ 3.449909] ata2.00: configured for UDMA/100
[ 3.453003] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GT32N 1.00 PQ: 0 ANSI: 5
[ 3.457094] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.457098] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.457343] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.457434] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.480835] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 3.480840] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.481252] hub 2-1:1.0: USB hub found
[ 3.481475] hub 2-1:1.0: 8 ports detected
[ 3.552455] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 3.675744] usb 1-1.1: New USB device found, idVendor=04f2, idProduct=b1d8
[ 3.675749] usb 1-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 3.675752] usb 1-1.1: Product: 1.3M WebCam
[ 3.675755] usb 1-1.1: Manufacturer: Sonix Technology Co., Ltd.
[ 4.263962] ACPI: Battery Slot [BAT0] (battery present)
[ 4.264177] Freeing unused kernel memory: 756k freed
[ 4.264442] Write protecting the kernel text: 5968k
[ 4.264474] Write protecting the kernel read-only data: 2428k
[ 4.264475] NX-protecting the kernel data: 4272k
[ 4.283780] udevd[110]: starting version 175
[ 5.905740] tg3.c:v3.123 (March 21, 2012)
[ 5.931456] tg3 mdio bus: probed
[ 5.942364] tg3 0000:02:00.0: eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 1c:75:08:41:f8:9f
[ 5.942366] tg3 0000:02:00.0: eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=200:01)
[ 5.942369] tg3 0000:02:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 5.942371] tg3 0000:02:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 6.073562] EXT4-fs (sda6): INFO: recovery required on readonly filesystem
[ 6.073565] EXT4-fs (sda6): write access will be enabled during recovery
[ 8.885924] EXT4-fs (sda6): recovery complete
[ 8.890454] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 28.115166] Adding 4051964k swap on /dev/sda7. Priority:-1 extents:1 across:4051964k
[ 28.123024] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.218632] udevd[333]: starting version 175
[ 28.478765] wmi: Mapper loaded
[ 28.638015] lp: driver loaded but no devices found
[ 28.798334] acpi device:0e: registered as cooling_device4
[ 28.798390] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 28.798436] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input5
[ 28.877276] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 28.877296] acer_wmi: Function bitmap for Communication Button: 0x1
[ 28.877300] acer_wmi: Brightness must be controlled by acpi video driver
[ 28.878178] input: Acer WMI hotkeys as /devices/virtual/input/input6
[ 28.878459] input: Acer BMA150 accelerometer as /devices/virtual/input/input7
[ 29.275274] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 29.569787] type=1400 audit(1359996580.241:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=684 comm="apparmor_parser"
[ 29.569796] type=1400 audit(1359996580.241:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=664 comm="apparmor_parser"
[ 29.570368] type=1400 audit(1359996580.241:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=684 comm="apparmor_parser"
[ 29.570467] type=1400 audit(1359996580.241:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=664 comm="apparmor_parser"
[ 29.570697] type=1400 audit(1359996580.241:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=684 comm="apparmor_parser"
[ 29.570852] type=1400 audit(1359996580.241:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=664 comm="apparmor_parser"
[ 29.594669] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 29.598414] init: failsafe main process (710) killed by TERM signal
[ 29.677069] Bluetooth: Core ver 2.16
[ 29.677090] NET: Registered protocol family 31
[ 29.677092] Bluetooth: HCI device and connection manager initialized
[ 29.677094] Bluetooth: HCI socket layer initialized
[ 29.677095] Bluetooth: L2CAP socket layer initialized
[ 29.677100] Bluetooth: SCO socket layer initialized
[ 29.843246] type=1400 audit(1359996580.513:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=797 comm="apparmor_parser"
[ 29.843390] type=1400 audit(1359996580.513:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=798 comm="apparmor_parser"
[ 29.843641] type=1400 audit(1359996580.513:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=795 comm="apparmor_parser"
[ 29.843705] type=1400 audit(1359996580.513:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper//chromium_browser" pid=797 comm="apparmor_parser"
[ 29.966040] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 29.974967] tg3 0000:02:00.0: irq 42 for MSI/MSI-X
[ 29.985876] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.986538] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 29.987486] init: alsa-restore main process (855) terminated with status 19
[ 30.059272] mei 0000:00:16.0: setting latency timer to 64
[ 30.059346] mei 0000:00:16.0: irq 43 for MSI/MSI-X
[ 30.063628] mei 0000:00:16.0: wd: failed to find the client
[ 30.089278] Bluetooth: RFCOMM TTY layer initialized
[ 30.089282] Bluetooth: RFCOMM socket layer initialized
[ 30.089284] Bluetooth: RFCOMM ver 1.11
[ 30.089937] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 30.089940] Bluetooth: BNEP filters: protocol multicast
[ 30.090713] lib80211: common routines for IEEE802.11 drivers
[ 30.090716] lib80211_crypt: registered algorithm 'NULL'
[ 30.166948] ppdev: user-space parallel port driver
[ 30.204197] ACPI Warning: 0x00000460-0x0000047f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 30.204204] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 30.204206] lpc_ich: Resource conflict(s) found affecting iTCO_wdt
[ 30.204209] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 30.204212] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 30.204215] ACPI Warning: 0x00000500-0x0000057f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 30.204218] ACPI Warning: 0x00000500-0x0000057f SystemIO conflicts with Region \_SB_.PCI0.GPIO 2 (20120320/utaddress-251)
[ 30.204221] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 30.204222] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 30.307956] Linux video capture interface: v2.00
[ 30.653656] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 30.655035] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2
[ 30.656248] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2
[ 30.657503] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 30.859549] uvcvideo: Found UVC 1.00 device 1.3M WebCam (04f2:b1d8)
[ 30.869235] input: 1.3M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input8
[ 30.869339] usbcore: registered new interface driver uvcvideo
[ 30.869341] USB Video Class driver (1.1.1)
[ 30.926109] tg3 0000:02:00.0: eth0: Link is down
[ 31.102104] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040213)
[ 31.160721] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c.
[ 31.282337] wl: module license 'MIXED/Proprietary' taints kernel.
[ 31.282341] Disabling lock debugging due to kernel taint
[ 31.368136] lib80211_crypt: registered algorithm 'TKIP'
[ 31.427107] eth1: Broadcom BCM4357 802.11 Hybrid Wireless Controller 5.100.82.112
[ 31.464873] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 31.538859] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 31.626878] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 31.627058] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 31.627410] hda-intel: 0000:01:00.1: Handle VGA-switcheroo audio client
[ 31.627490] snd_hda_intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 31.659567] [fglrx] Maximum main memory to use for locked dma buffers: 3732 MBytes.
[ 31.659764] [fglrx] vendor: 1002 device: 68e4 count: 1
[ 31.660059] [fglrx] ioport: bar 4, base 0x3000, size: 0x100
[ 31.660076] pci 0000:01:00.0: power state changed by ACPI to D0
[ 31.660080] pci 0000:01:00.0: power state changed by ACPI to D0
[ 31.660205] [fglrx] Kernel PAT support is enabled
[ 31.660221] [fglrx] module loaded - fglrx 9.0.2 [Sep 20 2012] with 1 minors
[ 31.681459] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 31.977053] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 31.983492] postgres (1032): /proc/1032/oom_adj is deprecated, please use /proc/1032/oom_score_adj instead.
[ 32.680083] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 33.300358] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input12
[ 33.810319] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 33.810322] vesafb: scrolling: redraw
[ 33.810324] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[ 33.811978] vesafb: framebuffer at 0xa0000000, mapped to 0xf8980000, using 3072k, total 3072k
[ 33.812165] Console: switching to colour frame buffer device 128x48
[ 33.812203] fb0: VESA VGA frame buffer device
[ 33.834944] init: gdm main process (1067) killed by TERM signal
[ 34.781865] fglrx_pci 0000:01:00.0: irq 46 for MSI/MSI-X
[ 34.783101] [fglrx] Firegl kernel thread PID: 1092
[ 34.783251] [fglrx] Firegl kernel thread PID: 1093
[ 34.783383] [fglrx] Firegl kernel thread PID: 1094
[ 34.783598] [fglrx] IRQ 46 Enabled
[ 34.805920] [fglrx] Gart USWC size:1216 M.
[ 34.805923] [fglrx] Gart cacheable size:482 M.
[ 34.805927] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 34.805928] [fglrx] Reserved FB block: Unshared offset:f930000, size:3d0000
[ 34.805930] [fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000
[ 35.022924] [fglrx] ATIF platform detected with notification ID: 0x81
[ 1310.346501] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd
[ 1310.441299] usb 2-1.3: New USB device found, idVendor=03f0, idProduct=2107
[ 1310.441304] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1310.441308] usb 2-1.3: Product: HP v120w
[ 1310.441311] usb 2-1.3: Manufacturer: HP v120w
[ 1310.441314] usb 2-1.3: SerialNumber: 90178d0142c2e9
[ 1310.487212] usbcore: registered new interface driver uas
[ 1310.499594] Initializing USB Mass Storage driver...
[ 1310.499759] scsi4 : usb-storage 2-1.3:1.0
[ 1310.499896] usbcore: registered new interface driver usb-storage
[ 1310.499900] USB Mass Storage support registered.
[ 1311.499322] scsi 4:0:0:0: Direct-Access HP v120w 0.00 PQ: 0 ANSI: 2
[ 1311.501477] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 1311.503631] sd 4:0:0:0: [sdb] 1974271 512-byte logical blocks: (1.01 GB/963 MiB)
[ 1311.504789] sd 4:0:0:0: [sdb] Write Protect is off
[ 1311.504793] sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
[ 1311.505704] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1311.505708] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1311.510069] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1311.510072] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1311.624051] sdb:
[ 1311.627917] sd 4:0:0:0: [sdb] Asking for cache data failed
[ 1311.627925] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 1311.627932] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 1325.744995] sdb: detected capacity change from 1010826752 to 0
[ 1329.667311] usb 2-1.3: USB disconnect, device number 3
[ 1489.531392] usb 2-1.1: new low-speed USB device number 4 using ehci_hcd
[ 1489.629877] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05f
[ 1489.629884] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1489.629890] usb 2-1.1: Product: USB Optical Mouse
[ 1489.629895] usb 2-1.1: Manufacturer: Logitech
[ 1489.721536] usbcore: registered new interface driver usbhid
[ 1489.721541] usbhid: USB HID core driver
[ 1489.728164] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input13
[ 1489.730436] hid-generic 0003:046D:C05F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 1546.359915] hub 2-1:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 1546.360197] usb 2-1.1: USB disconnect, device number 4
[ 1546.595884] usb 2-1.1: new low-speed USB device number 5 using ehci_hcd
[ 1546.694369] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05f
[ 1546.694377] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1546.694382] usb 2-1.1: Product: USB Optical Mouse
[ 1546.694387] usb 2-1.1: Manufacturer: Logitech
[ 1546.698987] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input14
[ 1546.699309] hid-generic 0003:046D:C05F.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 1547.639426] usb 2-1.1: USB disconnect, device number 5


[simosx]

[ 1489.531392] usb 2-1.1: new low-speed USB device number 4 using ehci_hcd
[ 1489.629877] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05f
[ 1489.629884] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1489.629890] usb 2-1.1: Product: USB Optical Mouse
[ 1489.629895] usb 2-1.1: Manufacturer: Logitech
[ 1489.721536] usbcore: registered new interface driver usbhid
[ 1489.721541] usbhid: USB HID core driver
[ 1489.728164] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input13
[ 1489.730436] hid-generic 0003:046D:C05F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 1546.359915] hub 2-1:1.0: port 1 disabled by hub (EMI?), re-enabling...
[ 1546.360197] usb 2-1.1: USB disconnect, device number 4
[ 1546.595884] usb 2-1.1: new low-speed USB device number 5 using ehci_hcd
[ 1546.694369] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05f
[ 1546.694377] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1546.694382] usb 2-1.1: Product: USB Optical Mouse
[ 1546.694387] usb 2-1.1: Manufacturer: Logitech
[ 1546.698987] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input14
[ 1546.699309] hid-generic 0003:046D:C05F.0002: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 1547.639426] usb 2-1.1: USB disconnect, device number 5

[NasosP]

Συναδελφος βλεπω.Κι εγω τα ιδια αντιμετωπιζω.Το ποντικι και το πληκτρολογιο λειτουργουν απροβληματιστα στα windows.Ομως σε ubuntu ξαφνικα νεκρωνουν ειτε και τα δυο ειτε το ενα.Εχω δοκιμασει Ubuntu 10.04, xubuntu 12.04 και lubuntu 12.04 και ακρη δεν εβγαλα.Αν αφου κολλησει του αλλαξεις usb θυρα δουλευει;Εγω μια φορα που το δοκιμασα δουλεψε και συνεχισα αλλα δεν ειναι λυση αυτη.

[eliasps]

Συναδελφος βλεπω.Κι εγω τα ιδια αντιμετωπιζω.Το ποντικι και το πληκτρολογιο λειτουργουν απροβληματιστα στα windows.Ομως σε ubuntu ξαφνικα νεκρωνουν ειτε και τα δυο ειτε το ενα.Εχω δοκιμασει Ubuntu 10.04, xubuntu 12.04 και lubuntu 12.04 και ακρη δεν εβγαλα.Αν αφου κολλησει του αλλαξεις usb θυρα δουλευει;Εγω μια φορα που το δοκιμασα δουλεψε και συνεχισα αλλα δεν ειναι λυση αυτη.

Windows στον ίδιο υπολογιστή; Αν ναι, τότε όντως είναι περίεργο.
Αν όχι, τότε ίσως υπάρχει κάποιο τεχνικό/μηχανικό πρόβλημα με τη συγκεκριμένη θύρα USB όπου δεν δουλεύει σωστά το ποντίκι.

Αντιμετώπιζα ένα παρόμοιο πρόβλημα με μία θυρα USB στο δικό μου Laptop.
Όταν συνδέω συσκευές εκεί, κάποιες φορές υπάρχει πρόβλημα ανταπόκρισης. Μου είπε κάποιος γνωστός μου που γνωρίζει από τέτοια θέματα, πως υπάρχει φθορά στην υποδοχή.

[simosx]

[ 1546.359915] hub 2-1:1.0: port 1 disabled by hub (EMI?), re-enabling...

Αυτό είναι το σημαντικό μήνυμα σφάλματος, και με αναζήτηση από αυτό το μήνυμα μπορεί να βρεθούν και τυχόν άλλα παραδείγματα άλλων χρηστών.
Αυτό το ΕΜΙ σημαίνει Electro-magnetic Interference, δηλαδή ηλεκτρομαγνητική παρεμβολή.

Με την εντολή

Κώδικας: Επιλογή όλων


usb-devices

μπορείς να εξάγεις περισσότερες πληροφορίες για τη συσκευή, καθώς και πόσο ρεύμα καταναλώνει (τυπικά 100mA).

[NasosP]

Συναδελφος βλεπω.Κι εγω τα ιδια αντιμετωπιζω.Το ποντικι και το πληκτρολογιο λειτουργουν απροβληματιστα στα windows.Ομως σε ubuntu ξαφνικα νεκρωνουν ειτε και τα δυο ειτε το ενα.Εχω δοκιμασει Ubuntu 10.04, xubuntu 12.04 και lubuntu 12.04 και ακρη δεν εβγαλα.Αν αφου κολλησει του αλλαξεις usb θυρα δουλευει;Εγω μια φορα που το δοκιμασα δουλεψε και συνεχισα αλλα δεν ειναι λυση αυτη.

Windows στον ίδιο υπολογιστή; Αν ναι, τότε όντως είναι περίεργο.
Αν όχι, τότε ίσως υπάρχει κάποιο τεχνικό/μηχανικό πρόβλημα με τη συγκεκριμένη θύρα USB όπου δεν δουλεύει σωστά το ποντίκι.

Αντιμετώπιζα ένα παρόμοιο πρόβλημα με μία θυρα USB στο δικό μου Laptop.
Όταν συνδέω συσκευές εκεί, κάποιες φορές υπάρχει πρόβλημα ανταπόκρισης. Μου είπε κάποιος γνωστός μου που γνωρίζει από τέτοια θέματα, πως υπάρχει φθορά στην υποδοχή.

Ναι ο ιδιος υπολογιστης διεθετε XP χωρις προβλημα.Το θεμα ειναι οτι το συγκεκριμενο φαινομενο παρατηρειται με ολες τις θυρες usb.Οπου και να βαλω πληκτρολογιο και ποντικι θα εμφανισθει αργα η γρηγορα κρασαρισμα.Εγω δοκιμασα και πληκτρολογιο και ποντικι με συνδεση PS2.Κι εκει τα ιδια.Δεν ειναι δυνατον να ειναι θεμα hardware εφοσον σε windows δουλευαν σωστα.