Sony Vaio Motion Eye cam

[aCtive]

Καλησπερίζω την κοινότητα!

Νεος χρήστης λίνουξ εδώ!
Από το καλοκαίρι έπεσε στα χέρια μου ένα notebook Sony Vaio TZ series με το οποίο γενικά έχω ξετρελαθεί. Με αυτό που δεν ξετρελάθηκα ήταν τα (s)Vista τα οποία μου έτρωγαν κ μπόλικο χώρο στον σκληρό. Απο καιρό σκεφτόμουν "νισάφι πια με την M$ και τα καπρίτσια της" είχα κάνει και παλιότερα μια προσπάθεια μετάβασης σε λίνουξ με μια έκδοση suse καθώς και με knopell αλλά πάντα τα παρατούσα. Πήρα όμως την απόφαση μια μέρα -εδώ και δυο εβδομάδες περίπου- κατέβασα 2 διανομές ubuntu(τον ερωδιό και τον αιγαγρο)και μια Fedora 10. Έβαλα πρώτα απτο livecd την fedora.συμπαθητική αλλά ο αιγαγρος ήταν αυτός που τελικά με κατέκτησε, ξήλωσα τελείως τα (s)Vista και να'μαι!

Ενθουσιασμένος αρκετά και ας έχω τα ψιλοπροβληματάκια που, με αρκετό ψάξιμο, διάβασμα και βοήθεια βέβαια πιστεύω πως όλα θα λυθούν.
Μετά απο αυτή την εισαγωγή πάμε και στο θέμα μας!

Δεν λειτουργεί η Καμερα που είναι ενσωματωμένη(motion eye)στον TZ!
Η Φωτογραφική Καμπίνα Cheese μου λέει οτι δεν βρέθηκε κάμερα!
Το ίδιο και το aMsn.
Αυτό που μου έκανε εντύπωση βέβαια είναι οτι στην Fedora την κάμερα την αναγνώριζε και λειτουργούσε μια χαρά!(?)
Έψαξα μήπως βρω κάποιον με παρόμοιο πρόβλημα με το ίδιο notebook. Βρήκα κάτι τύπους(σε ξένα φόρα) αλλά οι διαδικασίες που περιγράφαν(εγκατάσταση παλιότερων drivers κτλ)μου φάνηκαν το λιγότερο εξωγήινες(κοινώς δεν κατάλαβα τον χριστό μου )

Επίσης δεν λειτουργούν ο sensor δακτυλικού αποτυπώματος στο touchpad(αυτο νομίζω δεν το έχουν λύσει ούτε οι παραπάνω τύποι που γράφουν τα ακαταλαβίστικα)καθώς και τα μικρά κουμπάκια με λειτουργίες play/stop/next-prev track/eject κτλ.
Περισσότερο βέβαια απο όλα με καίει η κάμερα! γιαυτό και άνοιξα αυτό το θέμα!

Αυτά τα προβλήμα έχω βρει προς το παρόν με το TZ. μπορεί στο μέλλον να προκύψουν κ άλλα, αλλά δεν χαλιέμαι με τπτ. Τώρα που έκανα το βήμα της μετάβασης ΔΕΝ το κουνάω για κανένα λόγο!

Any help?

[atermon]

Καλή Χρονιά και καλώς όρισες στο forum της ελληνικής κοινότητας ubuntu-gr. Διαθέτω και εγώ vaio φορητό της σειράς FE και δεν αντιμετωπίζω πρόβλημα με την κάμερα. Το chipset της κάμερας μάλλον είναι το ίδιο. Φρόντισε να κάνεις τις ενημερώσεις λογισμικού, ενεργοποίησε επίσης τα αποθετήρια multiverse από τις "Πηγές λογισμικού". Στείλε επίσης και το αποτέλεσμα της εντολής (θα την εκτελέσεις σε παράθυρο τερματικού):

Κώδικας: Επιλογή όλων

lsusb

και

Κώδικας: Επιλογή όλων

dmesg

Για τον sensor δακτυλικού αποτυπώματος δεν γνωρίζω, μιας και δεν διαθέτω τέτοιο. Τα κουμπιά όμως του φορητού (mute, vol -+, S1 & S2) λειτουργούν κανονικά.

[aCtive]

Καλησπέρα και πάλι.
Νομίζω οτι κατάφερα να ενεργοποιήσω τα multiverse αποθετήρια αλλά δεν είδα φώς...
οι εντολές δίνουν

lsusb

Κώδικας: Επιλογή όλων

Bus 005 Device 007: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 005 Device 005: ID 05ca:183a Ricoh Co., Ltd
Bus 005 Device 006: ID 044e:3017 Alps Electric Co., Ltd
Bus 005 Device 003: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 005 Device 002: ID 054c:02d5 Sony Corp.
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 147e:2016
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:1205 Genesys Logic, Inc. Afilias Optical Mouse H3003
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


και dmesg

Κώδικας: Επιλογή όλων

[ 1.196782] pci 0000:09:04.0: setting latency timer to 64
[ 1.196790] bus: 00 index 0 io port: [0, ffff]
[ 1.196796] bus: 00 index 1 mmio: [0, ffffffff]
[ 1.196802] bus: 02 index 0 io port: [2000, 2fff]
[ 1.196807] bus: 02 index 1 mmio: [f6000000, f7ffffff]
[ 1.196812] bus: 02 index 2 mmio: [f0000000, f1ffffff]
[ 1.196818] bus: 02 index 3 mmio: [0, 0]
[ 1.196823] bus: 03 index 0 mmio: [0, 0]
[ 1.196827] bus: 03 index 1 mmio: [fc000000, fc0fffff]
[ 1.196832] bus: 03 index 2 mmio: [0, 0]
[ 1.196837] bus: 03 index 3 mmio: [0, 0]
[ 1.196842] bus: 04 index 0 io port: [3000, 3fff]
[ 1.196848] bus: 04 index 1 mmio: [f8000000, f9ffffff]
[ 1.196853] bus: 04 index 2 mmio: [f2000000, f3ffffff]
[ 1.196858] bus: 04 index 3 mmio: [0, 0]
[ 1.196863] bus: 08 index 0 io port: [4000, 4fff]
[ 1.196868] bus: 08 index 1 mmio: [fa000000, fbffffff]
[ 1.196873] bus: 08 index 2 mmio: [f4000000, f5ffffff]
[ 1.196878] bus: 08 index 3 mmio: [0, 0]
[ 1.196883] bus: 09 index 0 io port: [5000, 5fff]
[ 1.196888] bus: 09 index 1 mmio: [fc100000, fc1fffff]
[ 1.196894] bus: 09 index 2 mmio: [88000000, 8bffffff]
[ 1.196899] bus: 09 index 3 io port: [0, ffff]
[ 1.196904] bus: 09 index 4 mmio: [0, ffffffff]
[ 1.196909] bus: 0a index 0 io port: [5000, 50ff]
[ 1.196914] bus: 0a index 1 io port: [5400, 54ff]
[ 1.196919] bus: 0a index 2 mmio: [88000000, 8bffffff]
[ 1.196924] bus: 0a index 3 mmio: [8c000000, 8fffffff]
[ 1.196943] NET: Registered protocol family 2
[ 1.212119] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 1.212651] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.213349] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 1.213708] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.213716] TCP reno registered
[ 1.220144] NET: Registered protocol family 1
[ 1.220394] checking if image is initramfs... it is
[ 3.025373] Freeing initrd memory: 8492k freed
[ 3.025740] Simple Boot Flag at 0x36 set to 0x1
[ 3.028119] audit: initializing netlink socket (disabled)
[ 3.028167] type=2000 audit(1231108359.025:1): initialized
[ 3.042844] highmem bounce pool size: 64 pages
[ 3.042859] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.048820] VFS: Disk quotas dquot_6.5.1
[ 3.049048] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.049351] msgmni has been set to 1743
[ 3.049647] io scheduler noop registered
[ 3.049654] io scheduler anticipatory registered
[ 3.049660] io scheduler deadline registered
[ 3.049688] io scheduler cfq registered (default)
[ 3.049716] pci 0000:00:02.0: Boot video device
[ 3.050166] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.050250] pcieport-driver 0000:00:1c.0: found MSI capability
[ 3.050335] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 3.050442] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 3.050545] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 3.050788] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 3.050869] pcieport-driver 0000:00:1c.1: found MSI capability
[ 3.050950] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 3.051062] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 3.051172] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 3.051399] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 3.051480] pcieport-driver 0000:00:1c.2: found MSI capability
[ 3.051560] pci_express 0000:00:1c.2:pcie00: allocate port service
[ 3.051672] pci_express 0000:00:1c.2:pcie02: allocate port service
[ 3.051782] pci_express 0000:00:1c.2:pcie03: allocate port service
[ 3.052008] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 3.052089] pcieport-driver 0000:00:1c.3: found MSI capability
[ 3.052170] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 3.052283] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 3.052392] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 3.053275] isapnp: Scanning for PnP cards...
[ 3.407478] isapnp: No Plug & Play device found
[ 3.492485] hpet_resources: 0xfed00000 is busy
[ 3.492657] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.498383] brd: module loaded
[ 3.498562] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 3.498893] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 3.501803] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.501819] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.508309] mice: PS/2 mouse device common for all mice
[ 3.508643] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.508690] rtc0: alarms up to one month, y3k, hpet irqs
[ 3.509041] EISA: Probing bus 0 at eisa.0
[ 3.509052] Cannot allocate resource for EISA slot 1
[ 3.509062] Cannot allocate resource for EISA slot 2
[ 3.509067] Cannot allocate resource for EISA slot 3
[ 3.509072] Cannot allocate resource for EISA slot 4
[ 3.509078] Cannot allocate resource for EISA slot 5
[ 3.509100] EISA: Detected 0 cards.
[ 3.509107] cpuidle: using governor ladder
[ 3.509114] cpuidle: using governor menu
[ 3.510361] TCP cubic registered
[ 3.510420] Using IPI No-Shortcut mode
[ 3.510853] registered taskstats version 1
[ 3.511150] Magic number: 9:81:552
[ 3.511272] pci_link PNP0C0F:03: hash matches
[ 3.511337] rtc_cmos 00:07: setting system clock to 2009-01-04 22:32:40 UTC (1231108360)
[ 3.511345] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.511350] EDD information not available.
[ 3.511774] Freeing unused kernel memory: 424k freed
[ 3.511867] Write protecting the kernel text: 2576k
[ 3.511930] Write protecting the kernel read-only data: 936k
[ 3.548814] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 3.882164] fuse init (API version 7.9)
[ 4.002085] ACPI: SSDT 7F675847, 01B4 (r1 Sony VAIO 20071004 PTL 20050624)
[ 4.003049] ACPI: SSDT 7F6752D5, 04ED (r1 Sony VAIO 20071004 PTL 20050624)
[ 4.008977] Monitor-Mwait will be used to enter C-1 state
[ 4.008985] Monitor-Mwait will be used to enter C-2 state
[ 4.008992] Monitor-Mwait will be used to enter C-3 state
[ 4.020427] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 4.020567] processor ACPI0007:00: registered as cooling_device0
[ 4.020578] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 4.021437] ACPI: SSDT 7F6759FB, 00C8 (r1 Sony VAIO 20071004 PTL 20050624)
[ 4.022327] ACPI: SSDT 7F6757C2, 0085 (r1 Sony VAIO 20071004 PTL 20050624)
[ 4.028006] Marking TSC unstable due to TSC halts in idle
[ 4.126043] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 4.126194] processor ACPI0007:01: registered as cooling_device1
[ 4.126205] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.134967] thermal LNXTHERM:01: registered as thermal_zone0
[ 4.136611] ACPI: Thermal Zone [ATF0] (33 C)
[ 4.137677] thermal LNXTHERM:02: registered as thermal_zone1
[ 4.139141] ACPI: Thermal Zone [DTS0] (28 C)
[ 4.140263] thermal LNXTHERM:03: registered as thermal_zone2
[ 4.141798] ACPI: Thermal Zone [DTS1] (28 C)
[ 4.200905] device-mapper: uevent: version 1.0.3
[ 4.201425] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 4.562396] ACPI: ACPI Dock Station Driver
[ 4.970777] sky2 0000:02:00.0: power state changed by ACPI to D0
[ 4.970840] sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.970896] sky2 0000:02:00.0: setting latency timer to 64
[ 4.970992] sky2 0000:02:00.0: v1.22 addr 0xf6000000 irq 16 Yukon-2 EC Ultra rev 3
[ 4.972728] sky2 eth0: addr 00:1a:80:d1:d4:1f
[ 5.046657] usbcore: registered new interface driver usbfs
[ 5.046712] usbcore: registered new interface driver hub
[ 5.046808] usbcore: registered new device driver usb
[ 5.052145] USB Universal Host Controller Interface driver v3.0
[ 5.052243] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.052259] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.052268] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.052354] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 5.052410] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001820
[ 5.052687] usb usb1: configuration #1 chosen from 1 choice
[ 5.052753] hub 1-0:1.0: USB hub found
[ 5.052768] hub 1-0:1.0: 2 ports detected
[ 5.160263] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.160284] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.160293] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.160381] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 5.160442] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 5.160647] usb usb2: configuration #1 chosen from 1 choice
[ 5.160714] hub 2-0:1.0: USB hub found
[ 5.160729] hub 2-0:1.0: 2 ports detected
[ 5.249607] SCSI subsystem initialized
[ 5.291464] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 5.291483] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.291492] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.291559] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 5.291617] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00001860
[ 5.291826] usb usb3: configuration #1 chosen from 1 choice
[ 5.291896] hub 3-0:1.0: USB hub found
[ 5.291911] hub 3-0:1.0: 2 ports detected
[ 5.313504] libata version 3.00 loaded.
[ 5.497577] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 5.497598] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.497607] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.497669] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 5.497715] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[ 5.497925] usb usb4: configuration #1 chosen from 1 choice
[ 5.497998] hub 4-0:1.0: USB hub found
[ 5.498013] hub 4-0:1.0: 2 ports detected
[ 5.609092] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 5.708563] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 5.708592] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.708601] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.708675] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 5.712597] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.712611] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 5.712640] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc544000
[ 5.736049] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.736361] usb usb5: configuration #1 chosen from 1 choice
[ 5.736434] hub 5-0:1.0: USB hub found
[ 5.736452] hub 5-0:1.0: 8 ports detected
[ 5.944723] pata_acpi 0000:00:1f.1: power state changed by ACPI to D0
[ 5.944749] pata_acpi 0000:00:1f.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 5.944819] pata_acpi 0000:00:1f.1: setting latency timer to 64
[ 5.944849] pata_acpi 0000:00:1f.1: PCI INT B disabled
[ 5.944899] ohci1394 0000:09:04.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5.997777] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[21] MMIO=[fc100000-fc1007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 6.030771] ata_piix 0000:00:1f.1: version 2.12
[ 6.030805] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
[ 6.030822] ata_piix 0000:00:1f.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 6.030901] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 6.031238] scsi0 : ata_piix
[ 6.031463] scsi1 : ata_piix
[ 6.032837] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 6.032845] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 6.140168] usb 3-2: device not accepting address 2, error -71
[ 6.196893] hub 3-0:1.0: unable to enumerate USB device on port 2
[ 6.197003] ata1.00: ATA-7: TOSHIBA MK1214GAH, BW003A, max UDMA/100
[ 6.197011] ata1.00: 234441648 sectors, multi 16: LBA48
[ 6.204801] ata1.00: configured for UDMA/100
[ 6.204914] ata2: port disabled. ignoring.
[ 6.205179] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1214GA BW00 PQ: 0 ANSI: 5
[ 6.235183] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.263569] Driver 'sd' needs updating - please use bus_type methods
[ 6.264908] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 6.264963] sd 0:0:0:0: [sda] Write Protect is off
[ 6.264969] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.265084] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.265289] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 6.265343] sd 0:0:0:0: [sda] Write Protect is off
[ 6.265349] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6.265444] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.265453] sda: sda1 sda2 < sda5 >
[ 6.330914] sd 0:0:0:0: [sda] Attached SCSI disk
[ 6.500069] Clocksource tsc unstable (delta = -144808870 ns)
[ 6.589527] PM: Starting manual resume from disk
[ 6.589535] PM: Resume from partition 8:5
[ 6.589540] PM: Checking hibernation image.
[ 6.589868] PM: Resume from disk failed.
[ 6.692141] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 6.692385] kjournald starting. Commit interval 5 seconds
[ 6.692450] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.827123] usb 5-5: configuration #1 chosen from 1 choice
[ 6.940124] usb 5-6: new high speed USB device using ehci_hcd and address 3
[ 7.072707] usb 5-6: configuration #1 chosen from 1 choice
[ 7.072901] hub 5-6:1.0: USB hub found
[ 7.073085] hub 5-6:1.0: 3 ports detected
[ 7.288316] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302aa9123]
[ 7.504086] usb 5-8: new high speed USB device using ehci_hcd and address 5
[ 7.639887] usb 5-8: configuration #1 chosen from 1 choice
[ 7.728243] usb 5-6.2: new full speed USB device using ehci_hcd and address 6
[ 7.841758] usb 5-6.2: configuration #1 chosen from 1 choice
[ 8.080094] usb 4-1: new full speed USB device using uhci_hcd and address 2
[ 8.255430] usb 4-1: configuration #1 chosen from 1 choice
[ 15.658494] udevd version 124 started
[ 16.410964] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.499998] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.589977] Linux agpgart interface v0.103
[ 16.666690] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 16.667834] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 16.691409] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 16.719342] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 16.719760] ACPI: Lid Switch [LID0]
[ 16.719939] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 16.728074] ACPI: Power Button (CM) [PWRB]
[ 17.528689] tpm_inf_pnp 00:09: Found TPM with ID IFX0102
[ 17.528710] tpm_inf_pnp: probe of 00:09 failed with error -22
[ 17.738411] acpi device:03: registered as cooling_device2
[ 17.740952] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input4
[ 17.761069] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 17.986718] sony-laptop: Sony Programmable IO Control Driver v0.6.
[ 17.986757] sony-laptop: detected Type4 model
[ 17.987504] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2e/SNY6001:00/input/input5
[ 18.005216] input: Sony Vaio Jogdial as /devices/virtual/input/input6
[ 18.030733] sony-laptop: device allocated minor is 59
[ 18.037639] sony-laptop: Sony Notebook Control Driver v0.6.
[ 18.058542] ACPI: AC Adapter [ACAD] (off-line)
[ 18.091241] ACPI: Battery Slot [BAT1] (battery present)
[ 18.792814] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 18.792823] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 18.793761] iwlagn 0000:03:00.0: power state changed by ACPI to D0
[ 18.793787] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 18.793805] iwlagn 0000:03:00.0: setting latency timer to 64
[ 18.793851] iwlagn: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
[ 18.844178] iwlagn: Tunable channels: 13 802.11bg, 19 802.11a channels
[ 18.869654] Bluetooth: Core ver 2.13
[ 18.876167] iwlagn 0000:03:00.0: PCI INT A disabled
[ 18.876480] NET: Registered protocol family 31
[ 18.876486] Bluetooth: HCI device and connection manager initialized
[ 18.876494] Bluetooth: HCI socket layer initialized
[ 18.877438] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 18.963879] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 18.963929] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 19.064154] usbcore: registered new interface driver libusual
[ 19.294108] Linux video capture interface: v2.00
[ 19.324399] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 19.324620] usbcore: registered new interface driver btusb
[ 19.436534] intel_rng: FWH not detected
[ 19.594815] Initializing USB Mass Storage driver...
[ 19.595493] scsi2 : SCSI emulation for USB Mass Storage devices
[ 19.595857] usbcore: registered new interface driver usb-storage
[ 19.595866] USB Mass Storage support registered.
[ 19.595906] usb-storage: device found at 2
[ 19.595912] usb-storage: waiting for device to settle before scanning
[ 19.685172] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 19.685181] ricoh-mmc: Copyright(c) Philip Langdale
[ 19.706428] uvcvideo: Found UVC 1.00 device <unnamed> (05ca:183a)
[ 19.706720] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26).
[ 19.706963] uvcvideo: Failed to query (129) UVC control 1 (unit 0) : -32 (exp. 26).
[ 19.706971] uvcvideo: Failed to initialize the device (-5).
[ 19.707301] usbcore: registered new interface driver uvcvideo
[ 19.707347] USB Video Class driver (v0.1.0)
[ 19.767733] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 19.771715] iTCO_vendor_support: vendor-support=0
[ 19.799877] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 19.831072] ricoh-mmc: Ricoh MMC controller found at 0000:09:04.3 [1180:0843] (rev 11)
[ 19.831114] ricoh-mmc: Controller is now disabled.
[ 19.831169] Yenta: CardBus bridge found at 0000:09:04.0 [104d:900e]
[ 19.956810] Yenta: ISA IRQ mask 0x0cb8, PCI irq 20
[ 19.956818] Socket status: 30000006
[ 19.956826] Yenta: Raising subordinate bus# of parent bus (#09) from #0a to #0d
[ 19.956840] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 19.956846] cs: IO port probe 0x5000-0x5fff: clean.
[ 19.957453] pcmcia: parent PCI bridge Memory window: 0xfc100000 - 0xfc1fffff
[ 19.957460] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 20.036699] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 20.111378] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 20.148113] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 20.148153] iTCO_wdt: No card detected
[ 21.864755] cs: IO port probe 0x100-0x3af: clean.
[ 21.866936] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 21.867891] cs: IO port probe 0x820-0x8ff: clean.
[ 21.868742] cs: IO port probe 0xc00-0xcf7: clean.
[ 21.869894] cs: IO port probe 0xa00-0xaff: clean.
[ 22.585811] lp: driver loaded but no devices found
[ 22.967731] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k
[ 23.021141] EXT3 FS on sda1, internal journal
[ 23.915252] type=1505 audit(1231108380.619:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4218
[ 24.319270] type=1505 audit(1231108381.023:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4223
[ 24.319667] type=1505 audit(1231108381.023:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4223
[ 24.586855] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 24.601693] usb-storage: device scan complete
[ 24.603420] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862PS 1.20 PQ: 0 ANSI: 0
[ 24.606587] scsi 2:0:0:0: Attached scsi generic sg1 type 5
[ 24.690104] Driver 'sr' needs updating - please use bus_type methods
[ 24.697001] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 24.697042] Uniform CD-ROM driver Revision: 3.20
[ 24.697252] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 26.028091] ACPI: WMI: Mapper loaded
[ 27.505915] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 27.613053] apm: BIOS not found.
[ 27.840621] ppdev: user-space parallel port driver
[ 28.769340] sonypi: Sony Programmable I/O Controller Driver v1.26.
[ 28.772471] sonypi: please try the sony-laptop module instead and report failures, see also http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
[ 28.773141] ------------[ cut here ]------------
[ 28.773151] WARNING: at /build/buildd/linux-2.6.27/fs/sysfs/dir.c:463 sysfs_add_one+0x4e/0x50()
[ 28.773155] sysfs: duplicate filename 'sonypi' can not be created
[ 28.773159] Modules linked in: sonypi(+) ppdev acpi_cpufreq cpufreq_stats cpufreq_ondemand cpufreq_userspace cpufreq_conservative cpufreq_powersave freq_table sbs container pci_slot sbshc wmi sr_mod cdrom iptable_filter ip_tables x_tables sbp2 parport_pc lp parport joydev pcmcia arc4 iTCO_wdt yenta_socket serio_raw rsrc_nonstatic iTCO_vendor_support pcspkr psmouse ecb evdev uvcvideo ricoh_mmc crypto_blkcipher usb_storage pcmcia_core compat_ioctl32 btusb videodev v4l1_compat libusual snd_hda_intel bluetooth iwlagn snd_pcm_oss iwlcore snd_mixer_oss rfkill led_class snd_pcm mac80211 snd_seq_dummy cfg80211 battery ac sony_laptop snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event video output tpm_infineon tpm tpm_bios snd_seq snd_timer snd_seq_device snd soundcore snd_page_alloc button intel_agp agpgart shpchp pci_hotplug ext3 jbd mbcache sd_mod crc_t10dif sg ata_generic ata_piix pata_acpi libata scsi_mod ohci1394 ieee1394 ehci_hcd uhci_hcd usbcore sky2 dock dm_mirror dm_log dm_snapshot dm_mod thermal processor fan fbcon tileblit font bitblit softcursor fuse
[ 28.773319] Pid: 4947, comm: modprobe Not tainted 2.6.27-9-generic #1
[ 28.773324] [<c0131d65>] warn_slowpath+0x65/0x90
[ 28.773333] [<c0253600>] ? vsnprintf+0x400/0x7b0
[ 28.773341] [<c037e05e>] ? account_scheduler_latency+0xe/0x220
[ 28.773350] [<c024d9ca>] ? idr_get_empty_slot+0xda/0x250
[ 28.773357] [<c024dbc4>] ? ida_get_new_above+0x84/0x1c0
[ 28.773363] [<c01ffc38>] ? sysfs_ilookup_test+0x8/0x20
[ 28.773370] [<c01c7286>] ? find_inode+0x46/0x70
[ 28.773378] [<c01ffc30>] ? sysfs_ilookup_test+0x0/0x20
[ 28.773384] [<c01ffc30>] ? sysfs_ilookup_test+0x0/0x20
[ 28.773390] [<c01c6a59>] ? __iget+0x9/0x60
[ 28.773396] [<c02541f2>] ? strcmp+0x12/0x40
[ 28.773402] [<c01fff59>] ? sysfs_find_dirent+0x29/0x40
[ 28.773408] [<c0200018>] ? __sysfs_add_one+0x18/0x90
[ 28.773414] [<c02001ee>] sysfs_add_one+0x4e/0x50
[ 28.773419] [<c0200cde>] create_dir+0x4e/0x90
[ 28.773425] [<c0200d50>] sysfs_create_dir+0x30/0x50
[ 28.773431] [<c024e833>] kobject_add_internal+0xc3/0x1b0
[ 28.773437] [<c024e9f1>] kobject_add_varg+0x31/0x50
[ 28.773442] [<c024ea6c>] kobject_add+0x2c/0x60
[ 28.773447] [<c02c1a54>] device_add+0xb4/0x400
[ 28.773453] [<c02c1db7>] device_register+0x17/0x20
[ 28.773458] [<c02c1e6a>] device_create_vargs+0xaa/0xc0
[ 28.773470] [<c02c1ead>] device_create+0x2d/0x30
[ 28.773475] [<c02a8b26>] misc_register+0xc6/0x180
[ 28.773486] [<f9062bca>] sonypi_probe+0x252/0x4ee [sonypi]
[ 28.773497] [<f90625d0>] ? sonypi_irq+0x0/0x1b8 [sonypi]
[ 28.773506] [<c02c4bb4>] platform_drv_probe+0x14/0x20
[ 28.773512] [<c02c3d4e>] really_probe+0xee/0x190
[ 28.773520] [<c02c3e33>] driver_probe_device+0x43/0x60
[ 28.773526] [<c02c3edd>] __device_attach+0xd/0x10
[ 28.773531] [<c02c32ab>] bus_for_each_drv+0x5b/0x80
[ 28.773537] [<c02c3f96>] device_attach+0x76/0x80
[ 28.773542] [<c02c3ed0>] ? __device_attach+0x0/0x10
[ 28.773549] [<c02c30b7>] bus_attach_device+0x47/0x70
[ 28.773554] [<c02c1cdb>] device_add+0x33b/0x400
[ 28.773559] [<c0254299>] ? strlen+0x9/0x20
[ 28.773566] [<c025231d>] ? strlcpy+0x1d/0x60
[ 28.773572] [<c02c54dd>] platform_device_add+0x13d/0x180
[ 28.773578] [<c02c1454>] ? device_initialize+0x34/0xb0
[ 28.773584] [<c02c5664>] ? platform_device_alloc+0x54/0x70
[ 28.773591] [<f888d000>] ? sonypi_init+0x0/0xa3 [sonypi]
[ 28.773598] [<f888d06d>] sonypi_init+0x6d/0xa3 [sonypi]
[ 28.773608] [<c0101120>] _stext+0x30/0x160
[ 28.773615] [<c014c604>] ? __blocking_notifier_call_chain+0x14/0x70
[ 28.773626] [<c015c208>] sys_init_module+0x88/0x1b0
[ 28.773633] [<c0103f7b>] sysenter_do_call+0x12/0x2f
[ 28.773639] =======================
[ 28.773643] ---[ end trace bb0adcbb94064c06 ]---
[ 28.773649] kobject_add_internal failed for sonypi with -EEXIST, don't try to register things with the same name in the same directory.
[ 28.773656] Pid: 4947, comm: modprobe Tainted: G W 2.6.27-9-generic #1
[ 28.773660] [<c037c4b6>] ? printk+0x1d/0x1f
[ 28.773667] [<c024e877>] kobject_add_internal+0x107/0x1b0
[ 28.773673] [<c024e9f1>] kobject_add_varg+0x31/0x50
[ 28.773679] [<c024ea6c>] kobject_add+0x2c/0x60
[ 28.773684] [<c02c1a54>] device_add+0xb4/0x400
[ 28.773690] [<c02c1db7>] device_register+0x17/0x20
[ 28.773695] [<c02c1e6a>] device_create_vargs+0xaa/0xc0
[ 28.773705] [<c02c1ead>] device_create+0x2d/0x30
[ 28.773710] [<c02a8b26>] misc_register+0xc6/0x180
[ 28.773719] [<f9062bca>] sonypi_probe+0x252/0x4ee [sonypi]
[ 28.773727] [<f90625d0>] ? sonypi_irq+0x0/0x1b8 [sonypi]
[ 28.773736] [<c02c4bb4>] platform_drv_probe+0x14/0x20
[ 28.773742] [<c02c3d4e>] really_probe+0xee/0x190
[ 28.773750] [<c02c3e33>] driver_probe_device+0x43/0x60
[ 28.773755] [<c02c3edd>] __device_attach+0xd/0x10
[ 28.773761] [<c02c32ab>] bus_for_each_drv+0x5b/0x80
[ 28.773766] [<c02c3f96>] device_attach+0x76/0x80
[ 28.773771] [<c02c3ed0>] ? __device_attach+0x0/0x10
[ 28.773778] [<c02c30b7>] bus_attach_device+0x47/0x70
[ 28.773783] [<c02c1cdb>] device_add+0x33b/0x400
[ 28.773788] [<c0254299>] ? strlen+0x9/0x20
[ 28.773795] [<c025231d>] ? strlcpy+0x1d/0x60
[ 28.773801] [<c02c54dd>] platform_device_add+0x13d/0x180
[ 28.773807] [<c02c1454>] ? device_initialize+0x34/0xb0
[ 28.773813] [<c02c5664>] ? platform_device_alloc+0x54/0x70
[ 28.773819] [<f888d000>] ? sonypi_init+0x0/0xa3 [sonypi]
[ 28.773827] [<f888d06d>] sonypi_init+0x6d/0xa3 [sonypi]
[ 28.773835] [<c0101120>] _stext+0x30/0x160
[ 28.773842] [<c014c604>] ? __blocking_notifier_call_chain+0x14/0x70
[ 28.773852] [<c015c208>] sys_init_module+0x88/0x1b0
[ 28.773859] [<c0103f7b>] sysenter_do_call+0x12/0x2f
[ 28.773865] =======================
[ 28.773868] sonypi: misc_register failed
[ 28.801956] sonypi: probe of sonypi failed with error -17
[ 28.943320] kvm: disabled by bios
[ 31.293038] Bluetooth: L2CAP ver 2.11
[ 31.293054] Bluetooth: L2CAP socket layer initialized
[ 31.342534] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.342550] Bluetooth: BNEP filters: protocol multicast
[ 31.419557] Bridge firewalling registered
[ 31.421037] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 31.444372] Bluetooth: RFCOMM socket layer initialized
[ 31.444904] Bluetooth: RFCOMM TTY layer initialized
[ 31.444917] Bluetooth: RFCOMM ver 1.10
[ 31.464737] Bluetooth: SCO (Voice Link) ver 0.6
[ 31.464754] Bluetooth: SCO socket layer initialized
[ 31.921065] CE: hpet increasing min_delta_ns to 15000 nsec
[ 34.535883] [drm] Initialized drm 1.1.0 20060810
[ 34.543818] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 34.543833] pci 0000:00:02.0: setting latency timer to 64
[ 34.544080] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 35.640770] sky2 eth0: enabling interface
[ 35.647832] iwlagn 0000:03:00.0: power state changed by ACPI to D0
[ 35.647872] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 35.648015] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[ 35.648301] firmware: requesting iwlwifi-4965-2.ucode
[ 35.960958] Registered led device: iwl-phy0:radio
[ 35.961177] Registered led device: iwl-phy0:assoc
[ 35.961609] Registered led device: iwl-phy0:RX
[ 35.961970] Registered led device: iwl-phy0:TX
[ 36.108243] NET: Registered protocol family 17
[ 36.705488] wlan0: authenticate with AP 00:1c:a2:ac:d0:81
[ 36.707169] wlan0: authenticated
[ 36.707179] wlan0: associate with AP 00:1c:a2:ac:d0:81
[ 36.709485] wlan0: RX AssocResp from 00:1c:a2:ac:d0:81 (capab=0x461 status=0 aid=1)
[ 36.709494] wlan0: associated
[ 36.725062] wlan0: disassociating by local choice (reason=3)
[ 57.576754] wlan0: associate with AP 00:1c:a2:ac:d0:81
[ 57.579464] wlan0: RX ReassocResp from 00:1c:a2:ac:d0:81 (capab=0x461 status=0 aid=1)
[ 57.579479] wlan0: associated
[ 57.589801] wlan0: disassociating by local choice (reason=3)
[ 87.887235] wlan0: associate with AP 00:1c:a2:ac:d0:81
[ 87.889762] wlan0: RX ReassocResp from 00:1c:a2:ac:d0:81 (capab=0x461 status=0 aid=1)
[ 87.889772] wlan0: associated
[ 87.896350] wlan0: disassociating by local choice (reason=3)
[ 89.393974] canberra-gtk-pl[5757]: segfault at 96f1e50 ip b71fa84d sp b6fa0fa0 error 6 in libpulse.so.0.4.1[b71bb000+4e000]
[ 96.489878] wlan0: associate with AP 00:1c:a2:ac:d0:81
[ 96.504600] wlan0: authenticate with AP 00:1d:19:8d:60:05
[ 96.506302] wlan0: authenticated
[ 96.506320] wlan0: associate with AP 00:1d:19:8d:60:05
[ 96.508380] wlan0: RX AssocResp from 00:1d:19:8d:60:05 (capab=0x471 status=0 aid=2)
[ 96.508395] wlan0: associated
[ 97.799111] CPU0 attaching NULL sched-domain.
[ 97.799134] CPU1 attaching NULL sched-domain.
[ 97.802142] CPU0 attaching sched-domain:
[ 97.802154] domain 0: span 0-1 level MC
[ 97.802161] groups: 0 1
[ 97.802172] domain 1: span 0-1 level CPU
[ 97.802178] groups: 0-1
[ 97.802188] CPU1 attaching sched-domain:
[ 97.802193] domain 0: span 0-1 level MC
[ 97.802199] groups: 1 0
[ 97.802208] domain 1: span 0-1 level CPU
[ 97.802214] groups: 0-1
[ 145.121057] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 145.625051] ACPI Exception (evregion-0419): AE_TIME, Returned by Handler for [EmbeddedControl] [20080609]
[ 145.625091] ACPI Error (psparse-0530): Method parse/execution failed [\_TZ_.ATF0._TMP] (Node f7014390), AE_TIME
[ 166.761100] NET: Registered protocol family 10
[ 166.763139] lo: Disabled Privacy Extensions
[ 166.765266] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 176.808114] wlan0: no IPv6 routers present
[ 3071.309125] usb 5-2: new high speed USB device using ehci_hcd and address 7
[ 3071.443066] usb 5-2: configuration #1 chosen from 1 choice
[ 3071.443771] hub 5-2:1.0: USB hub found
[ 3071.444092] hub 5-2:1.0: 4 ports detected
[ 3085.616121] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 3085.788211] usb 1-1: configuration #1 chosen from 1 choice
[ 3085.920204] usbcore: registered new interface driver hiddev
[ 3085.933847] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input10
[ 3085.940376] input,hidraw0: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.0-1
[ 3085.942491] usbcore: registered new interface driver usbhid
[ 3085.944043] usbhid: v2.6:USB HID core driver
[ 3391.426500] type=1505 audit(1231111744.597:5): operation="profile_replace" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=25980
[ 3391.744796] type=1505 audit(1231111744.917:6): operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=25985
[ 3391.746402] type=1505 audit(1231111744.917:7): operation="profile_replace" name="/usr/sbin/cupsd" name2="default" pid=25985


Αυτάάάά....

[linuxman]

Για την κάμερα δες εδώ http://ubuntuforums.org/showthread.php?t=838210&page=8 εάν δεν καταλάβεις πες να δούμε πως θα το κάνεις .

[aCtive]

Φαντάζομαι εννοείς αυτό συγκεκριμένα το ποστ

Κατάφερα να κάνω το 1ο βήμα δλδ αυτό :

Κώδικας: Επιλογή όλων

svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk

Αφού πρώτα εγκατέστησα το subversion.
Έχω εντοπίσει και το αρxείο uvc_video.c αλλά δεν μπορώ να καταλάβω τι πρέπει να αντικαταστήσω!

Πήγα και στο αρχικό ποστ του θρεντ και αφού έκανα το "τεστ"που περιγράφει (

Κώδικας: Επιλογή όλων

sudo lsusb -d xxxx:yyyy -v | grep "14 Video"

) παρατήρησα οτι δεν μου εμφανίζει τπτ.(ενώ θα έπρεπε να εμφανίζει κάτι σαν αυτό :

Κώδικας: Επιλογή όλων

bFunctionClass 14 Video
bInterfaceClass 14 Video
bInterfaceClass 14 Video
bInterfaceClass 14 Video

)
If your webcam passes this test, you can go on reading. Otherwise, your camera needs to use propertary driver, because it doesn't use standard protocol/command.


Καμία ιδέα?

Ευχαριστώ

[logari81]

ριξε μια ματια κι εδω:
http://ubuntuforums.org/showthread.php?t=968381