Lexmark 2300 series πρόβλημα

από **tsianos1** » 26 Απρ 2009, 18:04

δεν βρίσκει drivers για τον 2300 τι να κάνω??? γρήγορα γιατί έχω μία εργασία

από **linuxman** » 27 Απρ 2009, 22:40

tsianos1 έγραψε:δεν βρίσκει drivers για τον 2300 τι να κάνω??? γρήγορα γιατί έχω μία εργασία

Δεν είναι όμορφο να το λες γρήγορα γιατί έχω μία εργασία , εάν έχεις πρόβλημα και δεν έχεις μπει στο κόπο καν να ψάξεις , πως περιμένεις να μάθεις .
Τέλος πάντων .
Δώσε μου τα αποτελέσματα εντολών
1.

Κώδικας: Επιλογή όλων: lsusb

όταν εκτυπωτής είναι συνδεδεμένος
2.

Κώδικας: Επιλογή όλων: dmesg | tail -n 30

Όλα τα αποτελέσματα βάλε ανάμεσα στα

Κώδικας: Επιλογή όλων: [code]εδώ[/code]

Πες πως έκανες εγκατάσταση , κανονική η μέσα από τα παράθυρα , έχεις ανοίξει όλες τις πήγες λογισμικού (αν όχι δες τους οδηγούς )
Και εάν το βλέπει γενικά τον εκτυπωτή σου η όχι .

από **gourgi** » 02 Μάιος 2009, 14:38

στην βάση με τους οδηγούς εκτυπωτών για linux βρήκα αυτό http://www.openprinting.org/show_printe ... xmark-2300
το οποίο έχει κάποιες οδηγίες για ubuntu.
δοκίμασε αν σου κάνει.

επίσης είδα στο τέλος που γράφει ότι μπορείς να δοκιμάσεις και με αυτόν τον οδηγό http://www.openprinting.org/show_driver ... xmark-2300

από **tsianos1** » 06 Μάιος 2009, 13:22

linuxman έγραψε:
tsianos1 έγραψε:δεν βρίσκει drivers για τον 2300 τι να κάνω??? γρήγορα γιατί έχω μία εργασία

Δεν είναι όμορφο να το λες γρήγορα γιατί έχω μία εργασία , εάν έχεις πρόβλημα και δεν έχεις μπει στο κόπο καν να ψάξεις , πως περιμένεις να μάθεις .
Τέλος πάντων .
Δώσε μου τα αποτελέσματα εντολών
1.
Κώδικας: Επιλογή όλων
lsusb
όταν εκτυπωτής είναι συνδεδεμένος
2.
Κώδικας: Επιλογή όλων
dmesg | tail -n 30

Όλα τα αποτελέσματα βάλε ανάμεσα στα
Κώδικας: Επιλογή όλων
[code]εδώ[/code]

Πες πως έκανες εγκατάσταση , κανονική η μέσα από τα παράθυρα , έχεις ανοίξει όλες τις πήγες λογισμικού (αν όχι δες τους οδηγούς )
Και εάν το βλέπει γενικά τον εκτυπωτή σου η όχι .

με το lsusb μου γράφει

Κώδικας: Επιλογή όλων: Bus 001 Device 006: ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp. JM20337 Hi-Speed USB to SATA & PATA Combo Bridge Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 004: ID 0a81:0101 Chesen Electronics Corp. Keyboard Bus 003 Device 003: ID 043d:00bb Lexmark International, Inc. 2300 Series Bus 003 Device 002: ID 058f:9254 Alcor Micro Corp. Hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 04d9:1135 Holtek Semiconductor, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

και με το dmesg μου λέει

Κώδικας: Επιλογή όλων: [ 0.000000] 007fe00000 - 007fee0000 page 4k [ 0.000000] kernel direct mapping tables up to 7fee0000 @ 10000-14000 [ 0.000000] last_map_addr: 7fee0000 end: 7fee0000 [ 0.000000] RAMDISK: 3785b000 - 37fef736 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 007fee0000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0000200000 - 0000b854b0] TEXT DATA BSS ==> [0000200000 - 0000b854b0] [ 0.000000] #3 [003785b000 - 0037fef736] RAMDISK ==> [003785b000 - 0037fef736] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000f6530] 000f6530 [ 0.000000] [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007fee0 [ 0.000000] On node 0 totalpages: 523887 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 2541 pages reserved [ 0.000000] DMA zone: 1386 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7109 pages used for memmap [ 0.000000] DMA32 zone: 512795 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] I/O APIC #4 Version 17 at 0xFEC00000. [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) [ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 514181 [ 0.000000] Kernel command line: root=UUID=7ab8db4b-b479-412c-9ebb-913822e053fe ro quiet splash acpi=off [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3000.071 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.004000] allocated 20971520 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Checking aperture... [ 0.004000] No AGP bridge found [ 0.004000] Node 0: aperture @ 1e42000000 size 32 MB [ 0.004000] Aperture beyond 4GB. Ignoring. [ 0.004000] Memory: 2024972k/2096000k available (4760k kernel code, 452k absent, 70016k reserved, 2540k data, 536k init) [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.14 BogoMIPS (lpj=12000284) [ 0.004023] Security Framework initialized [ 0.004029] SELinux: Disabled at boot. [ 0.004041] AppArmor: AppArmor initialized [ 0.004048] Mount-cache hash table entries: 256 [ 0.004155] Initializing cgroup subsys ns [ 0.004157] Initializing cgroup subsys cpuacct [ 0.004159] Initializing cgroup subsys memory [ 0.004162] Initializing cgroup subsys freezer [ 0.004171] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004173] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004174] tseg: 007ff00000 [ 0.004176] CPU: Physical Processor ID: 0 [ 0.004177] CPU: Processor Core ID: 0 [ 0.004179] using C1E aware idle routine [ 0.005388] Setting APIC routing to flat [ 0.005489] ExtINT not setup in hardware but reported by MP table [ 0.005990] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.045692] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.152001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 6000.09 BogoMIPS (lpj=12000186) [ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004000] CPU: L2 Cache: 1024K (64 bytes/line) [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.236182] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03 [ 0.236192] Brought up 2 CPUs [ 0.236193] Total of 2 processors activated (12000.23 BogoMIPS). [ 0.236298] CPU0 attaching sched-domain: [ 0.236299] domain 0: span 0-1 level CPU [ 0.236301] groups: 0 1 [ 0.236305] CPU1 attaching sched-domain: [ 0.236306] domain 0: span 0-1 level CPU [ 0.236307] groups: 1 0 [ 0.236356] net_namespace: 1400 bytes [ 0.236356] Booting paravirtualized kernel on bare hardware [ 0.236356] Time: 9:58:12 Date: 05/06/09 [ 0.236356] regulator: core version 0.5 [ 0.236356] NET: Registered protocol family 16 [ 0.236356] node 0 link 0: io port [b000, ffff] [ 0.236356] TOM: 0000000080000000 aka 2048M [ 0.236356] node 0 link 0: mmio [a0000, bffff] [ 0.236356] node 0 link 0: mmio [80000000, dfffffff] [ 0.236356] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.236356] node 0 link 0: mmio [e0000000, e03fffff] [ 0.236356] bus: [00,03] on node 0 link 0 [ 0.236356] bus: 00 index 0 io port: [0, ffff] [ 0.236356] bus: 00 index 1 mmio: [a0000, bffff] [ 0.236356] bus: 00 index 2 mmio: [80000000, efffffff] [ 0.236356] bus: 00 index 3 mmio: [f0000000, fcffffffff] [ 0.236356] PCI: Using configuration type 1 for base access [ 0.236569] ACPI: Interpreter disabled. [ 0.236569] SCSI subsystem initialized [ 0.236569] libata version 3.00 loaded. [ 0.236569] usbcore: registered new interface driver usbfs [ 0.236569] usbcore: registered new interface driver hub [ 0.236569] usbcore: registered new device driver usb [ 0.236569] PCI: Probing PCI hardware [ 0.236569] PCI: Probing PCI hardware (bus 00) [ 0.236569] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.236569] pci 0000:00:02.0: PME# disabled [ 0.236569] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.236569] pci 0000:00:07.0: PME# disabled [ 0.236569] pci 0000:00:12.0: reg 10 io port: [0xfc00-0xfc07] [ 0.236569] pci 0000:00:12.0: reg 14 io port: [0xf800-0xf803] [ 0.236569] pci 0000:00:12.0: reg 18 io port: [0xf400-0xf407] [ 0.236569] pci 0000:00:12.0: reg 1c io port: [0xf000-0xf003] [ 0.236569] pci 0000:00:12.0: reg 20 io port: [0xec00-0xec0f] [ 0.236569] pci 0000:00:12.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.236569] pci 0000:00:12.0: set SATA to AHCI mode [ 0.236569] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.236569] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.236569] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe02c000-0xfe02cfff] [ 0.236569] pci 0000:00:13.3: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.236569] pci 0000:00:13.4: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.236569] pci 0000:00:13.5: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.236569] pci 0000:00:13.5: supports D1 D2 [ 0.236569] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.236569] pci 0000:00:13.5: PME# disabled [ 0.236569] pci 0000:00:14.0: reg 10 io port: [0xb00-0xb0f] [ 0.236593] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.236599] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.236605] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.236610] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.236616] pci 0000:00:14.1: reg 20 io port: [0xe400-0xe40f] [ 0.236662] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe020000-0xfe023fff] [ 0.236693] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.236696] pci 0000:00:14.2: PME# disabled [ 0.236841] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.236849] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff] [ 0.236856] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.236860] pci 0000:01:00.0: reg 24 io port: [0xcc00-0xcc7f] [ 0.236864] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbf80000-0xfbffffff] [ 0.236915] pci 0000:00:02.0: bridge io port: [0xc000-0xcfff] [ 0.236916] pci 0000:00:02.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.236919] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.236957] pci 0000:02:00.0: reg 10 io port: [0xdc00-0xdcff] [ 0.236973] pci 0000:02:00.0: reg 18 64bit mmio: [0xfdcff000-0xfdcfffff] [ 0.236988] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.236997] pci 0000:02:00.0: supports D1 D2 [ 0.236998] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.237002] pci 0000:02:00.0: PME# disabled [ 0.237045] pci 0000:00:07.0: bridge io port: [0xd000-0xdfff] [ 0.237047] pci 0000:00:07.0: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.237050] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.237103] pci 0000:00:14.4: transparent bridge [ 0.237107] pci 0000:00:14.4: bridge io port: [0xb000-0xbfff] [ 0.237110] pci 0000:00:14.4: bridge 32bit mmio: [0xfdf00000-0xfdffffff] [ 0.237114] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfde00000-0xfdefffff] [ 0.237630] PCI: Discovered primary peer bus ff [IRQ] [ 0.237634] pci 0000:00:00.0: default IRQ router [1002:7910] [ 0.237647] pci 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 0.237650] pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.237653] pci 0000:00:13.1: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 0.237656] pci 0000:00:13.2: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 0.237658] pci 0000:00:13.3: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 0.237661] pci 0000:00:13.4: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 0.237664] pci 0000:00:13.5: PCI->APIC IRQ transform: INT D -> IRQ 19 [ 0.237668] pci 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.237670] pci 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.237677] pci 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.237680] pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 19 [ 0.248007] Bluetooth: Core ver 2.13 [ 0.248017] NET: Registered protocol family 31 [ 0.248017] Bluetooth: HCI device and connection manager initialized [ 0.248017] Bluetooth: HCI socket layer initialized [ 0.248017] NET: Registered protocol family 8 [ 0.248017] NET: Registered protocol family 20 [ 0.248022] NetLabel: Initializing [ 0.248023] NetLabel: domain hash size = 128 [ 0.248024] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.248036] NetLabel: unlabeled traffic allowed by default [ 0.248170] AppArmor: AppArmor Filesystem Enabled [ 0.248171] pnp: PnP ACPI: disabled [ 0.248293] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01 [ 0.248295] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.248297] pci 0000:00:02.0: MEM window: 0xf8000000-0xfbffffff [ 0.248299] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.248303] pci 0000:00:07.0: PCI bridge, secondary bus 0000:02 [ 0.248305] pci 0000:00:07.0: IO window: 0xd000-0xdfff [ 0.248307] pci 0000:00:07.0: MEM window: 0xfdc00000-0xfdcfffff [ 0.248309] pci 0000:00:07.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.248311] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.248313] pci 0000:00:14.4: IO window: 0xb000-0xbfff [ 0.248318] pci 0000:00:14.4: MEM window: 0xfdf00000-0xfdffffff [ 0.248321] pci 0000:00:14.4: PREFETCH window: 0x000000fde00000-0x000000fdefffff [ 0.248331] pci 0000:00:02.0: setting latency timer to 64 [ 0.248335] pci 0000:00:07.0: setting latency timer to 64 [ 0.248341] bus: 00 index 0 io port: [0x00-0xffff] [ 0.248343] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.248344] bus: 01 index 0 io port: [0xc000-0xcfff] [ 0.248345] bus: 01 index 1 mmio: [0xf8000000-0xfbffffff] [ 0.248346] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff] [ 0.248348] bus: 01 index 3 mmio: [0x0-0x0] [ 0.248349] bus: 02 index 0 io port: [0xd000-0xdfff] [ 0.248350] bus: 02 index 1 mmio: [0xfdc00000-0xfdcfffff] [ 0.248351] bus: 02 index 2 mmio: [0xfdd00000-0xfddfffff] [ 0.248352] bus: 02 index 3 mmio: [0x0-0x0] [ 0.248353] bus: 03 index 0 io port: [0xb000-0xbfff] [ 0.248354] bus: 03 index 1 mmio: [0xfdf00000-0xfdffffff] [ 0.248356] bus: 03 index 2 mmio: [0xfde00000-0xfdefffff] [ 0.248357] bus: 03 index 3 io port: [0x00-0xffff] [ 0.248358] bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.248359] bus: ff index 0 io port: [0x00-0xffff] [ 0.248361] bus: ff index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.248366] NET: Registered protocol family 2 [ 0.284037] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.284455] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.285966] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.286416] TCP: Hash tables configured (established 262144 bind 65536) [ 0.286418] TCP reno registered [ 0.296071] NET: Registered protocol family 1 [ 0.296165] checking if image is initramfs... it is [ 0.686206] Freeing initrd memory: 7761k freed [ 0.689810] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.689862] audit: initializing netlink socket (disabled) [ 0.689862] type=2000 audit(1241603891.688:1): initialized [ 0.695239] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.696046] VFS: Disk quotas dquot_6.5.1 [ 0.696052] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.696394] fuse init (API version 7.10) [ 0.696394] msgmni has been set to 3971 [ 0.696394] alg: No test for stdrng (krng) [ 0.696394] io scheduler noop registered [ 0.696394] io scheduler anticipatory registered [ 0.696394] io scheduler deadline registered [ 0.696394] io scheduler cfq registered (default) [ 0.788036] pci 0000:01:00.0: Boot video device [ 0.788082] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 0.788096] pcieport-driver 0000:00:02.0: found MSI capability [ 0.788109] pcieport-driver 0000:00:02.0: irq 2303 for MSI/MSI-X [ 0.788114] pci_express 0000:00:02.0:pcie00: allocate port service [ 0.788140] pcieport-driver 0000:00:07.0: setting latency timer to 64 [ 0.788153] pcieport-driver 0000:00:07.0: found MSI capability [ 0.788163] pcieport-driver 0000:00:07.0: irq 2302 for MSI/MSI-X [ 0.788168] pci_express 0000:00:07.0:pcie00: allocate port service [ 0.788198] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.788204] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.788842] Linux agpgart interface v0.103 [ 0.788845] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 0.788944] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.789449] brd: module loaded [ 0.789649] loop: module loaded [ 0.789687] Fixed MDIO Bus: probed [ 0.789691] PPP generic driver version 2.4.2 [ 0.789729] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.789745] Driver 'sd' needs updating - please use bus_type methods [ 0.789750] Driver 'sr' needs updating - please use bus_type methods [ 0.789772] ahci 0000:00:12.0: version 3.0 [ 0.789797] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 0.789874] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 0.789876] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part [ 0.790217] scsi0 : ahci [ 0.790217] scsi1 : ahci [ 0.790217] scsi2 : ahci [ 0.790217] scsi3 : ahci [ 0.790217] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [ 0.790217] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 0.790217] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 0.790217] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 1.108023] ata1: SATA link down (SStatus 0 SControl 300) [ 1.608009] ata2: softreset failed (device not ready) [ 1.608061] ata2: failed due to HW bug, retry pmp=0 [ 1.772019] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.772026] ata2.00: ATA-8: Hitachi HDP725032GLA360, GM3OA52A, max UDMA/133 [ 1.772026] ata2.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32) [ 1.772026] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.772029] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd [ 1.772029] ata2.00: configured for UDMA/133 [ 2.108024] ata3: SATA link down (SStatus 0 SControl 300) [ 2.608010] ata4: softreset failed (device not ready) [ 2.608060] ata4: failed due to HW bug, retry pmp=0 [ 2.772019] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.772024] ata4.00: ATAPI: HL-DT-ST DVDRAM GH22NS40, NL00, max UDMA/100 [ 2.772028] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.776027] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.776028] ata4.00: configured for UDMA/100 [ 2.796039] isa bounce pool size: 16 pages [ 2.796100] scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72503 GM3O PQ: 0 ANSI: 5 [ 2.796162] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.796174] sd 1:0:0:0: [sda] Write Protect is off [ 2.796175] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.796191] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.796241] sd 1:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.796249] sd 1:0:0:0: [sda] Write Protect is off [ 2.796251] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.796265] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.796268] sda: sda1 sda2 sda3 < sda5 sda6 > [ 2.888128] sd 1:0:0:0: [sda] Attached SCSI disk [ 2.888160] sd 1:0:0:0: Attached scsi generic sg0 type 0 [ 2.892018] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS40 NL00 PQ: 0 ANSI: 5 [ 2.904014] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.904016] Uniform CD-ROM driver Revision: 3.20 [ 2.904071] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 2.904100] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 2.904353] scsi4 : pata_atiixp [ 2.904353] scsi5 : pata_atiixp [ 2.904353] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14 [ 2.904353] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15 [ 3.068551] ata5.01: ATAPI: HL-DT-STDVD-RAM GSA-H22L, 1.00, max UDMA/66 [ 3.084507] ata5.01: configured for UDMA/66 [ 3.240140] scsi 4:0:1:0: CD-ROM HL-DT-ST DVD-RAM GSA-H22L 1.00 PQ: 0 ANSI: 5 [ 3.244110] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.244110] sr 4:0:1:0: Attached scsi CD-ROM sr1 [ 3.244110] sr 4:0:1:0: Attached scsi generic sg2 type 5 [ 3.244318] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.244342] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 3.244381] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 3.244407] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 3.244424] ehci_hcd 0000:00:13.5: debug port 1 [ 3.244444] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [ 3.256010] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 3.256070] usb usb1: configuration #1 chosen from 1 choice [ 3.256087] hub 1-0:1.0: USB hub found [ 3.256093] hub 1-0:1.0: 10 ports detected [ 3.256176] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.256193] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.256221] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 3.256244] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [ 3.316029] usb usb2: configuration #1 chosen from 1 choice [ 3.316045] hub 2-0:1.0: USB hub found [ 3.316053] hub 2-0:1.0: 2 ports detected [ 3.316113] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.316137] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 3.316158] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [ 3.376038] usb usb3: configuration #1 chosen from 1 choice [ 3.376053] hub 3-0:1.0: USB hub found [ 3.376060] hub 3-0:1.0: 2 ports detected [ 3.376120] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 3.376142] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 3.376166] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [ 3.436030] usb usb4: configuration #1 chosen from 1 choice [ 3.436044] hub 4-0:1.0: USB hub found [ 3.436051] hub 4-0:1.0: 2 ports detected [ 3.436111] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 3.436142] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 3.436153] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [ 3.496032] usb usb5: configuration #1 chosen from 1 choice [ 3.496053] hub 5-0:1.0: USB hub found [ 3.496060] hub 5-0:1.0: 2 ports detected [ 3.496121] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 3.496147] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 3.496158] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [ 3.556030] usb usb6: configuration #1 chosen from 1 choice [ 3.556046] hub 6-0:1.0: USB hub found [ 3.556053] hub 6-0:1.0: 2 ports detected [ 3.556108] uhci_hcd: USB Universal Host Controller Interface driver [ 3.556153] usbcore: registered new interface driver libusual [ 3.556174] usbcore: registered new interface driver usbserial [ 3.556180] USB Serial support registered for generic [ 3.624052] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 3.764036] usb 1-2: configuration #1 chosen from 1 choice [ 4.256012] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 4.424035] usb 2-1: configuration #1 chosen from 1 choice [ 4.688012] usb 3-1: new full speed USB device using ohci_hcd and address 2 [ 4.852045] usb 3-1: configuration #1 chosen from 1 choice [ 4.856035] hub 3-1:1.0: USB hub found [ 4.856038] hub 3-1:1.0: 4 ports detected [ 5.132013] usb 3-2: new full speed USB device using ohci_hcd and address 3 [ 5.304046] usb 3-2: configuration #1 chosen from 1 choice [ 5.312127] usbcore: registered new interface driver usbserial_generic [ 5.312129] usbserial: USB Serial Driver core [ 5.312148] PNP: No PS/2 controller found. Probing ports directly. [ 5.312463] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 5.312466] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 5.324032] mice: PS/2 mouse device common for all mice [ 5.336061] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 5.336089] rtc0: alarms up to one day, 114 bytes nvram [ 5.336126] device-mapper: uevent: version 1.0.3 [ 5.336142] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 5.336142] device-mapper: multipath: version 1.0.5 loaded [ 5.336142] device-mapper: multipath round-robin: version 1.0.0 loaded [ 5.336142] cpuidle: using governor ladder [ 5.336142] cpuidle: using governor menu [ 5.336288] TCP cubic registered [ 5.336328] NET: Registered protocol family 10 [ 5.336576] lo: Disabled Privacy Extensions [ 5.336752] NET: Registered protocol family 17 [ 5.336765] Bluetooth: L2CAP ver 2.11 [ 5.336766] Bluetooth: L2CAP socket layer initialized [ 5.336768] Bluetooth: SCO (Voice Link) ver 0.6 [ 5.336769] Bluetooth: SCO socket layer initialized [ 5.336774] Bluetooth: RFCOMM socket layer initialized [ 5.336774] Bluetooth: RFCOMM TTY layer initialized [ 5.336774] Bluetooth: RFCOMM ver 1.10 [ 5.336774] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 5.336774] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor. [ 5.336774] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor. [ 5.336774] registered taskstats version 1 [ 5.336774] Magic number: 9:837:979 [ 5.336774] rtc_cmos rtc_cmos: setting system clock to 2009-05-06 09:58:17 UTC (1241603897) [ 5.336774] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 5.336774] EDD information not available. [ 5.336774] Freeing unused kernel memory: 536k freed [ 5.336774] Write protecting the kernel read-only data: 6708k [ 5.388849] usb 3-1.4: new low speed USB device using ohci_hcd and address 4 [ 5.457444] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.457478] r8169 0000:02:00.0: setting latency timer to 64 [ 5.457578] r8169 0000:02:00.0: irq 2301 for MSI/MSI-X [ 5.457963] eth0: RTL8168b/8111b at 0xffffc20000058000, 00:1e:8c:86:8e:48, XID 38000000 IRQ 2301 [ 5.474884] usbcore: registered new interface driver hiddev [ 5.488300] input: HID 04d9:1135 as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input1 [ 5.507310] usb 3-1.4: configuration #1 chosen from 1 choice [ 5.524142] generic-usb 0003:04D9:1135.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:1135] on usb-0000:00:13.0-1/input0 [ 5.531147] generic-usb 0003:043D:00BB.0002: hiddev96,hidraw1: USB HID v1.00 Device [Lexmark 2300 Series] on usb-0000:00:13.1-2/input2 [ 5.538333] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1.4/3-1.4:1.0/input/input2 [ 5.572157] generic-usb 0003:0A81:0101.0003: input,hidraw2: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:13.1-1.4/input0 [ 5.582143] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1.4/3-1.4:1.1/input/input3 [ 5.608102] generic-usb 0003:0A81:0101.0004: input,hidraw3: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:13.1-1.4/input1 [ 5.608120] usbcore: registered new interface driver usbhid [ 5.608122] usbhid: v2.6:USB HID core driver [ 5.839533] PM: Starting manual resume from disk [ 5.839537] PM: Resume from partition 8:1 [ 5.839538] PM: Checking hibernation image. [ 5.839628] PM: Resume from disk failed. [ 5.849875] EXT4-fs: barriers enabled [ 5.865943] kjournald2 starting. Commit interval 5 seconds [ 5.865943] EXT4-fs: delayed allocation enabled [ 5.865943] EXT4-fs: file extents enabled [ 5.865943] EXT4-fs: mballoc enabled [ 5.865943] EXT4-fs: mounted filesystem with ordered data mode. [ 9.594287] udev: starting version 141 [ 9.892092] usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x043D pid 0x00BB [ 9.892110] usbcore: registered new interface driver usblp [ 9.912407] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 9.948137] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 10.574572] nvidia: module license 'NVIDIA' taints kernel. [ 10.828058] nvidia 0000:01:00.0: setting latency timer to 64 [ 10.828422] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.44 Tue Mar 24 05:46:32 PST 2009 [ 10.941815] lp: driver loaded but no devices found [ 11.029953] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k [ 11.556930] EXT4 FS on sda5, internal journal on sda5:8 [ 13.612045] EXT4-fs: barriers enabled [ 13.616030] kjournald2 starting. Commit interval 5 seconds [ 13.616146] EXT4 FS on sda2, internal journal on sda2:8 [ 13.616146] EXT4-fs: delayed allocation enabled [ 13.616146] EXT4-fs: file extents enabled [ 13.650929] EXT4-fs: mballoc enabled [ 13.650933] EXT4-fs: mounted filesystem with ordered data mode. [ 13.684036] EXT4-fs: barriers enabled [ 13.684044] kjournald2 starting. Commit interval 5 seconds [ 13.684044] EXT4 FS on sda6, internal journal on sda6:8 [ 13.684044] EXT4-fs: delayed allocation enabled [ 13.684044] EXT4-fs: file extents enabled [ 13.684837] EXT4-fs: mballoc enabled [ 13.684839] EXT4-fs: mounted filesystem with ordered data mode. [ 13.878113] type=1505 audit(1241603906.040:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=1945 [ 13.908808] type=1505 audit(1241603906.072:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1949 [ 13.908920] type=1505 audit(1241603906.072:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1949 [ 13.908955] type=1505 audit(1241603906.072:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1949 [ 13.908984] type=1505 audit(1241603906.072:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1949 [ 13.998312] type=1505 audit(1241603906.160:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1954 [ 13.998460] type=1505 audit(1241603906.160:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1954 [ 14.018690] type=1505 audit(1241603906.180:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1958 [ 16.261504] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.261507] Bluetooth: BNEP filters: protocol multicast [ 16.310970] Bridge firewalling registered [ 18.102604] ppdev: user-space parallel port driver [ 19.184214] NVRM: failed to register with the ACPI subsystem! [ 19.310591] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread FFFF880037830000 could not acquire Mutex [1] [20080926] [ 21.840788] r8169: eth0: link up [ 21.840796] r8169: eth0: link up [ 32.064014] eth0: no IPv6 routers present [ 814.112055] usb 1-2: USB disconnect, address 3 [ 826.644019] usb 1-2: new high speed USB device using ehci_hcd and address 6 [ 826.784323] usb 1-2: configuration #1 chosen from 1 choice [ 826.833682] Initializing USB Mass Storage driver... [ 826.836232] scsi6 : SCSI emulation for USB Mass Storage devices [ 826.837108] usbcore: registered new interface driver usb-storage [ 826.837111] USB Mass Storage support registered. [ 826.837214] usb-storage: device found at 6 [ 826.837215] usb-storage: waiting for device to settle before scanning [ 831.836051] usb-storage: device scan complete [ 831.836055] scsi 6:0:0:0: Direct-Access ST350032 0AS PQ: 0 ANSI: 2 CCS [ 831.844275] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 831.847242] sd 6:0:0:0: [sdb] Write Protect is off [ 831.848020] sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 831.848021] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 831.853508] sd 6:0:0:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 831.856515] sd 6:0:0:0: [sdb] Write Protect is off [ 831.856515] sd 6:0:0:0: [sdb] Mode Sense: 00 38 00 00 [ 831.856515] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 831.856515] sdb: sdb1 sdb2 [ 831.880117] sd 6:0:0:0: [sdb] Attached SCSI disk [ 831.880172] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 1086.466879] exaile[11657]: segfault at 39 ip 00007f2d2163c928 sp 00007fff2d0c5ea0 error 4 in libgtk-x11-2.0.so.0.1600.1[7f2d21412000+3ef000]

από **linuxman** » 06 Μάιος 2009, 14:13

Για δώσε απάντηση και στα παρακάτω
Πες πως έκανες εγκατάσταση , κανονική η μέσα από τα παράθυρα , έχεις ανοίξει όλες τις πήγες λογισμικού (αν όχι δες τους οδηγούς )
Και εάν το βλέπει γενικά τον εκτυπωτή σου η όχι .

από **tsianos1** » 21 Μάιος 2009, 18:12

linuxman έγραψε:Για δώσε απάντηση και στα παρακάτω
Πες πως έκανες εγκατάσταση , κανονική η μέσα από τα παράθυρα , έχεις ανοίξει όλες τις πήγες λογισμικού (αν όχι δες τους οδηγούς )
Και εάν το βλέπει γενικά τον εκτυπωτή σου η όχι .

δεν έχει παρακάτω και ο guide που μου έδωσε το παιδί απο δω δεν δουλεύει . help. και τον εκτυπωτή τον βλέπει γενικά

από **linuxman** » 27 Μάιος 2009, 02:33

Δεν έδωσες απαντήσεις σε αυτά που ρώτησα .
Δες το viewtopic.php?f=9&t=895 βίντεο 2 και κάνε ότι αναφέρεται εκεί .

Lexmark 2300 series πρόβλημα

Lexmark 2300 series πρόβλημα

Re: Lexmark 2300 series πρόβλημα

Re: Lexmark 2300 series πρόβλημα

Re: Lexmark 2300 series πρόβλημα

Re: Lexmark 2300 series πρόβλημα

Re: Lexmark 2300 series πρόβλημα

Re: Lexmark 2300 series πρόβλημα