CRYPTO TV RADIO Analog usb TV with FM

[apollon]

Δοκίμασα να συνδέσω την εξωτερική κάρτα tv (me usb) και δεν ανάβει καν το φωτάκι της (την δοκίμασα σε διάφορες θύρες usb οι οποίες δουλεύουν μόνο η κάρτα δεν ανάβει). Το cd που συνοδέυει το υλικό αυτό είναι δυστυχώς σε exe. Από το κατάστημα που την αγόρασα μου είπανε ότι είναι συμβατη και σε linux.

Εν τω μεταξύ έχω και κουμπωμένη μια εσωτερική κάρτα tv (TV/TUNER card Philips SAA7130 crypto) η οποία δεν δουλεύει δυστυχώς (βλ και σχετικό topic εδω http://forum.ubuntu-gr.org/viewtopic.php?f=16&t=2655&start=0&hilit=CRYPTO)

Μπορεί να με βοηθήσει κάποιος για την εξωτερική (usb) κάρτα;

Ουτε σαν usb το δείχνει το τερματικο

Κώδικας: Επιλογή όλων

apollon@apollon-desktop:~$ lsusb -tv
Bus# 1
`-Dev# 1 Vendor 0x1d6b Product 0x0002
Bus# 2
`-Dev# 1 Vendor 0x1d6b Product 0x0002
|-Dev# 2 Vendor 0x03f0 Product 0x2505
|-Dev# 4 Vendor 0x0bc2 Product 0x3001
`-Dev# 5 Vendor 0xeb1a Product 0x2860
Bus# 3
`-Dev# 1 Vendor 0x1d6b Product 0x0001
Bus# 4
`-Dev# 1 Vendor 0x1d6b Product 0x0001
Bus# 5
`-Dev# 1 Vendor 0x1d6b Product 0x0001
Bus# 6
`-Dev# 1 Vendor 0x1d6b Product 0x0001
Bus# 7
`-Dev# 1 Vendor 0x1d6b Product 0x0001
Bus# 8
`-Dev# 1 Vendor 0x1d6b Product 0x0001
apollon@apollon-desktop:~$



[Teo_7_gr]

Έχω το ίδιο πρόβλημα. Μπορεί να βοηθήσει κάποιος?

[the_eye]

Δώσε με την κάρτα επάνω τα αποτελέσματα των παρακάτω εντολών στο τερματικό.

Κώδικας: Επιλογή όλων

lsusb
dmesg

[the_eye]

lsusb

Κώδικας: Επιλογή όλων

Bus 005 Device 002: ID 04fc:0538 Sunplus Technology Co., Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 009: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636
Bus 001 Device 002: ID eb1a:2860 eMPIA Technology, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


Κώδικας: Επιλογή όλων


[ 16.659033] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[ 16.672820] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 16.694548] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 16.694551] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 16.695009] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 16.695011] [drm] No driver support for vblank timestamp query.
[ 16.738343] usb 1-6: ath9k_htc: Transferred FW: ar9271.fw, size: 51312
[ 16.852107] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x60000000, bo f0913600
[ 16.853365] Console: switching to colour frame buffer device 180x56
[ 16.853393] fb0: nouveaufb frame buffer device
[ 16.853395] drm: registered panic notifier
[ 16.853401] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[ 17.003603] usb 1-6: ath9k_htc: HTC initialized with 33 credits
[ 17.116176] em28xx #0: V4L2 video device registered as video0
[ 17.116178] em28xx #0: V4L2 VBI device registered as vbi0
[ 17.116201] usbcore: registered new interface driver em28xx
[ 17.116203] em28xx driver loaded
[ 17.613474] ath: EEPROM regdomain: 0x809c
[ 17.613479] ath: EEPROM indicates we should expect a country code
[ 17.613483] ath: doing EEPROM country->regdmn map search
[ 17.613486] ath: country maps to regdmn code: 0x52
[ 17.613489] ath: Country alpha2 being used: CN
[ 17.613492] ath: Regpair used: 0x52
[ 17.613497] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613503] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613507] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613512] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613516] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613524] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613525] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613528] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613529] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613531] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613533] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613535] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613537] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613539] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613541] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613543] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613545] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613547] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613549] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613551] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613553] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613555] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.613557] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 17.613559] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 17.613561] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 17.613721] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613723] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613725] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613727] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613729] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613731] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613733] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613735] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613737] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613739] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613741] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613743] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613745] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613747] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613749] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613752] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613753] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613756] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613757] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613760] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613762] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613764] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613766] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613768] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613770] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613772] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.613774] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[ 17.613776] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi, 2000 mBm)
[ 17.621313] cfg80211: Calling CRDA for country: CN
[ 17.624088] Registered led device: ath9k-phy0::radio
[ 17.624706] Registered led device: ath9k-phy0::assoc
[ 17.625285] Registered led device: ath9k-phy0::tx
[ 17.625868] Registered led device: ath9k-phy0::rx
[ 17.625872] usb 1-6: ath9k_htc: USB layer initialized
[ 17.626332] usbcore: registered new interface driver ath9k_hif_usb
[ 17.638995] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 17.638999] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639001] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639003] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639005] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639007] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639009] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639011] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639013] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639015] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639017] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639019] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639021] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639023] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639025] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639027] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639029] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639032] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639033] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639036] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639037] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639040] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639041] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639044] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639046] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 17.639048] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 17.639049] cfg80211: Disabling freq 2484 MHz
[ 17.639052] cfg80211: Regulatory domain changed to country: CN
[ 17.639054] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 17.639056] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 17.639058] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (N/A, 3000 mBm)
[ 17.830800] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.592532] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 27.237230] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 27.251294] ISOFS: changing to secondary root
[ 28.267592] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 37.808019] ath: Unable to set channel
[ 78.536547] usb 1-6: USB disconnect, address 3
[ 78.707370] ath: Chip reset failed
[ 78.707375] ath: Unable to reset channel (2422 Mhz) reset status -22
[ 78.707378] ath: Unable to set channel
[ 78.729339] ath: Failed to wakeup in 500us
[ 78.739381] ath: Failed to wakeup in 500us
[ 78.749434] ath: Failed to wakeup in 500us
[ 78.784778] usb 1-6: ath9k_htc: USB layer deinitialized
[ 83.356024] usb 1-6: new high speed USB device using ehci_hcd and address 5
[ 83.788879] usb 1-6: ath9k_htc: Transferred FW: ar9271.fw, size: 51312
[ 84.054250] usb 1-6: ath9k_htc: HTC initialized with 33 credits
[ 84.604253] ath: EEPROM regdomain: 0x809c
[ 84.604258] ath: EEPROM indicates we should expect a country code
[ 84.604262] ath: doing EEPROM country->regdmn map search
[ 84.604265] ath: country maps to regdmn code: 0x52
[ 84.604268] ath: Country alpha2 being used: CN
[ 84.604271] ath: Regpair used: 0x52
[ 84.604276] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604281] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604285] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604290] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604294] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604299] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604303] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604307] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604311] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604316] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604320] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604324] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604328] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604333] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604337] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604342] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604345] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604350] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604354] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604359] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604363] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 84.604367] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.604371] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 84.604375] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 84.604379] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 84.604538] cfg80211: Ignoring regulatory request Set by core since the driver requires its own regulaotry domain to be set first
[ 84.611413] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611420] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611424] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611429] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611433] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611437] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611441] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611446] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611450] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611455] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611459] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611463] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611467] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611472] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611476] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611480] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611484] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611489] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611493] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611498] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611502] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611506] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611510] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611515] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611519] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 84.611523] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 84.611527] cfg80211: Disabling freq 2484 MHz
[ 84.614695] Registered led device: ath9k-phy1::radio
[ 84.615452] Registered led device: ath9k-phy1::assoc
[ 84.615505] Registered led device: ath9k-phy1::tx
[ 84.615550] Registered led device: ath9k-phy1::rx
[ 84.615556] usb 1-6: ath9k_htc: USB layer initialized
[ 84.912852] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 96.748025] ath: Unable to set channel
[ 104.546672] usb 1-6: USB disconnect, address 5
[ 104.770128] ath: Failed to wakeup in 500us
[ 104.780169] ath: Failed to wakeup in 500us
[ 104.790177] ath: Failed to wakeup in 500us
[ 104.844214] usb 1-6: ath9k_htc: USB layer deinitialized
[ 109.040023] usb 1-6: new high speed USB device using ehci_hcd and address 6
[ 109.472890] usb 1-6: ath9k_htc: Transferred FW: ar9271.fw, size: 51312
[ 109.738137] usb 1-6: ath9k_htc: HTC initialized with 33 credits
[ 110.249887] ath: EEPROM regdomain: 0x809c
[ 110.249891] ath: EEPROM indicates we should expect a country code
[ 110.249894] ath: doing EEPROM country->regdmn map search
[ 110.249897] ath: country maps to regdmn code: 0x52
[ 110.249901] ath: Country alpha2 being used: CN
[ 110.249904] ath: Regpair used: 0x52
[ 110.249909] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249914] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249918] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249922] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249927] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249931] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249935] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249940] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249944] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249949] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249952] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249957] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249961] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249966] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249969] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249974] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249978] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249983] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249987] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 110.249991] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.249995] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 110.250000] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.250004] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 110.250008] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 110.250012] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 110.250161] cfg80211: Ignoring regulatory request Set by core since the driver requires its own regulaotry domain to be set first
[ 110.258290] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258297] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258302] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258307] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258311] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258316] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258320] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258324] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258329] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258333] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258337] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258342] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258346] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258350] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258354] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258359] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258363] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258368] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258372] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258376] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258380] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258385] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258389] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258393] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258397] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 110.258402] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 110.258406] cfg80211: Disabling freq 2484 MHz
[ 110.259319] Registered led device: ath9k-phy2::radio
[ 110.259365] Registered led device: ath9k-phy2::assoc
[ 110.259409] Registered led device: ath9k-phy2::tx
[ 110.259451] Registered led device: ath9k-phy2::rx
[ 110.259456] usb 1-6: ath9k_htc: USB layer initialized
[ 110.465991] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 120.280053] usb 1-6: USB disconnect, address 6
[ 120.662329] ath: Failed to wakeup in 500us
[ 120.678017] ath: Failed to wakeup in 500us
[ 120.688035] ath: Failed to wakeup in 500us
[ 120.740210] usb 1-6: ath9k_htc: USB layer deinitialized
[ 122.384036] usb 1-6: new high speed USB device using ehci_hcd and address 7
[ 122.816770] usb 1-6: ath9k_htc: Transferred FW: ar9271.fw, size: 51312
[ 123.082142] usb 1-6: ath9k_htc: HTC initialized with 33 credits
[ 123.592892] ath: EEPROM regdomain: 0x809c
[ 123.592896] ath: EEPROM indicates we should expect a country code
[ 123.592900] ath: doing EEPROM country->regdmn map search
[ 123.592903] ath: country maps to regdmn code: 0x52
[ 123.592907] ath: Country alpha2 being used: CN
[ 123.592910] ath: Regpair used: 0x52
[ 123.592915] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592920] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592924] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592929] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592933] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592937] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592942] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592946] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592950] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592955] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592959] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592964] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592968] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592972] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592976] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592981] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592985] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592989] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.592993] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 123.592998] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.593002] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 123.593006] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.593011] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 123.593015] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 123.593019] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[ 123.593173] cfg80211: Ignoring regulatory request Set by core since the driver requires its own regulaotry domain to be set first
[ 123.595832] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595839] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595843] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595848] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595852] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595857] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595861] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595865] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595869] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595874] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595878] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595882] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595886] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595891] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595895] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595899] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595903] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595908] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595912] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595917] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595921] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595926] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595930] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595934] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595939] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 123.595943] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 123.595947] cfg80211: Disabling freq 2484 MHz
[ 123.599443] Registered led device: ath9k-phy3::radio
[ 123.599499] Registered led device: ath9k-phy3::assoc
[ 123.599552] Registered led device: ath9k-phy3::tx
[ 123.599601] Registered led device: ath9k-phy3::rx
[ 123.599607] usb 1-6: ath9k_htc: USB layer initialized
[ 123.804491] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 136.069798] usb 1-6: USB disconnect, address 7
[ 136.463476] ath: Failed to wakeup in 500us
[ 136.486029] ath: Failed to wakeup in 500us
[ 136.496047] ath: Failed to wakeup in 500us
[ 136.580359] usb 1-6: ath9k_htc: USB layer deinitialized
[ 149.304019] usb 1-6: new high speed USB device using ehci_hcd and address 8
[ 149.612253] usbcore: registered new interface driver uas
[ 149.621037] Initializing USB Mass Storage driver...
[ 149.621140] scsi2 : usb-storage 1-6:1.0
[ 149.621237] usbcore: registered new interface driver usb-storage
[ 149.621238] USB Mass Storage support registered.
[ 151.532310] usb 1-6: USB disconnect, address 8
[ 151.900018] usb 1-6: new high speed USB device using ehci_hcd and address 9
[ 152.038313] scsi3 : usb-storage 1-6:1.2
[ 152.093256] usbcore: registered new interface driver usbserial
[ 152.093723] USB Serial support registered for generic
[ 152.094240] usbcore: registered new interface driver usbserial_generic
[ 152.094245] usbserial: USB Serial Driver core
[ 152.123813] USB Serial support registered for GSM modem (1-port)
[ 152.123928] option 1-6:1.0: GSM modem (1-port) converter detected
[ 152.124517] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[ 152.124557] option 1-6:1.1: GSM modem (1-port) converter detected
[ 152.124767] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[ 152.124813] option 1-6:1.3: GSM modem (1-port) converter detected
[ 152.125058] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[ 152.125601] usbcore: registered new interface driver option
[ 152.125605] option: v0.7.2:USB Driver for GSM modems
[ 153.045070] scsi 3:0:0:0: CD-ROM ZTE USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2
[ 153.045688] scsi 3:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2
[ 153.048921] sr2: scsi-1 drive
[ 153.049165] sr 3:0:0:0: Attached scsi CD-ROM sr2
[ 153.049360] sr 3:0:0:0: Attached scsi generic sg3 type 5
[ 153.052370] sd 3:0:0:1: Attached scsi generic sg4 type 0
[ 153.052801] sd 3:0:0:1: [sdb] Attached SCSI removable disk
[ 204.771524] PPP BSD Compression module registered
[ 204.808460] PPP Deflate Compression module registered

[Qdata]

@Teo_7_gr Τον κώδικα τον βάζουμε μέσα σε [cοde]κώδικας[/cοde]. Επιλέγουμε το κείμενο και πατάμε το κουμπάκι .

[Teo_7_gr]

Ok ευχαριστώ.

[the_eye]

Η κάρτα σου φαίνεται, είναι αυτή
Bus 001 Device 002: ID eb1a:2860 eMPIA Technology, Inc.

Αν ανοίξεις το tvtime, δεν βλέπεις εικόνα ;

[Teo_7_gr]

Το tvtime ανοίγει και κλείνει σε κλάσματα. Η συσκευή ούτε που ανοίγει. Το λαμπάκι παραμένει σβηστό.

[the_eye]

Δοκίμασε να τρέξεις το tvtime από το τερματικό. Γράψε εδώ αν βγάλει κάτι.

[Teo_7_gr]

Πως το κάνω αυτό?