Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

από **petsam** » 12 Νοέμ 2009, 14:15

Χαίρετε.
Προσπαθώ να δω τηλεόραση στο Ubuntu 9.10 και έχω μια PCTV Rave/PCI και KWorld DVB-T 310U/USB
Προτιμώ να δουλέψω την PCI για να έχω εύκαιρη τη USB για το φορητό.
Μετά από μια προσπάθεια εξεύρεσης λύσης
http://forum.ubuntu-gr.org/viewtopic.php?f=9&t=3869&start=30#p84355

έγραψε:Αν το δοκιμασες και δεν δουλευει, ανοιξε ενα καινουριο θεμα με το προβλημά σου και παρεθεσε τα αποτελεσματα των εντολών:

sokoban4ever έγραψε:Κώδικας: Επιλογή όλων
lsusb
dmesg

Στην εντολή,

έγραψε:modprobe -r bttv

μου βγάζει το εξής

έγραψε:WARNING: All config files need .conf: /etc/modprobe.d/bttv, it will be ignored in a future release.
FATAL: Error removing bttv (/lib/modules/2.6.31-14-generic/kernel/drivers/media/video/bt8xx/bttv.ko): Operation not permitted

κατόπιν

Κώδικας: Επιλογή όλων: petros@petros-desktop:~$ lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) 01:00.0 Ethernet controller: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller (rev b0)[/quote] dmseg [quote][ 0.447337] ACPI: Power Button [PWRB] [ 0.447884] ACPI: SSDT df6a00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.448200] processor LNXCPU:00: registered as cooling_device0 [ 0.448480] ACPI: SSDT df6a0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.448761] processor LNXCPU:01: registered as cooling_device1 [ 0.451047] isapnp: Scanning for PnP cards... [ 0.501344] Switched to high resolution mode on CPU 1 [ 0.504037] Switched to high resolution mode on CPU 0 [ 0.803981] isapnp: No Plug & Play device found [ 0.805086] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.805187] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.805674] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.806632] brd: module loaded [ 0.807063] loop: module loaded [ 0.807142] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.807246] ata_piix 0000:00:1f.1: version 2.13 [ 0.807260] alloc irq_desc for 18 on node -1 [ 0.807262] alloc kstat_irqs on node -1 [ 0.807271] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.807309] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.807388] scsi0 : ata_piix [ 0.807491] scsi1 : ata_piix [ 0.808613] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.808616] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.808646] alloc irq_desc for 19 on node -1 [ 0.808648] alloc kstat_irqs on node -1 [ 0.808655] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.808662] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.808702] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.808770] scsi2 : ata_piix [ 0.808832] scsi3 : ata_piix [ 0.810111] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 [ 0.810114] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 [ 0.810896] Fixed MDIO Bus: probed [ 0.810927] PPP generic driver version 2.4.2 [ 0.811036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.811059] alloc irq_desc for 23 on node -1 [ 0.811061] alloc kstat_irqs on node -1 [ 0.811068] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.811082] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.811086] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.811138] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.815047] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.815052] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.815068] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00 [ 0.828034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.828169] usb usb1: configuration #1 chosen from 1 choice [ 0.828217] hub 1-0:1.0: USB hub found [ 0.828225] hub 1-0:1.0: 8 ports detected [ 0.828299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.828321] uhci_hcd: USB Universal Host Controller Interface driver [ 0.828358] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.828365] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.828368] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.828407] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.828432] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 0.828519] usb usb2: configuration #1 chosen from 1 choice [ 0.828544] hub 2-0:1.0: USB hub found [ 0.828550] hub 2-0:1.0: 2 ports detected [ 0.828600] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.828606] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.828609] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.828643] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.828666] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 0.828745] usb usb3: configuration #1 chosen from 1 choice [ 0.828772] hub 3-0:1.0: USB hub found [ 0.828778] hub 3-0:1.0: 2 ports detected [ 0.828826] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.828832] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.828835] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.828871] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.828901] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 0.828981] usb usb4: configuration #1 chosen from 1 choice [ 0.829007] hub 4-0:1.0: USB hub found [ 0.829013] hub 4-0:1.0: 2 ports detected [ 0.829065] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.829072] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.829075] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.829109] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.829140] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 0.829224] usb usb5: configuration #1 chosen from 1 choice [ 0.829249] hub 5-0:1.0: USB hub found [ 0.829255] hub 5-0:1.0: 2 ports detected [ 0.829362] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.831654] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.831660] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.831725] mice: PS/2 mouse device common for all mice [ 0.831818] rtc_cmos 00:03: RTC can wake from S4 [ 0.831856] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.831880] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.831986] device-mapper: uevent: version 1.0.3 [ 0.832106] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.832182] device-mapper: multipath: version 1.1.0 loaded [ 0.832185] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.832310] EISA: Probing bus 0 at eisa.0 [ 0.832336] EISA: Detected 0 cards. [ 0.832420] cpuidle: using governor ladder [ 0.832422] cpuidle: using governor menu [ 0.832906] TCP cubic registered [ 0.833055] NET: Registered protocol family 10 [ 0.833493] lo: Disabled Privacy Extensions [ 0.833807] NET: Registered protocol family 17 [ 0.833830] Bluetooth: L2CAP ver 2.13 [ 0.833831] Bluetooth: L2CAP socket layer initialized [ 0.833834] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.833835] Bluetooth: SCO socket layer initialized [ 0.833879] Bluetooth: RFCOMM TTY layer initialized [ 0.833883] Bluetooth: RFCOMM socket layer initialized [ 0.833885] Bluetooth: RFCOMM ver 1.11 [ 0.834292] Using IPI No-Shortcut mode [ 0.834363] PM: Resume from disk failed. [ 0.834376] registered taskstats version 1 [ 0.834478] Magic number: 1:716:76 [ 0.834547] rtc_cmos 00:03: setting system clock to 2009-11-12 12:05:45 UTC (1258027545) [ 0.834550] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.834552] EDD information not available. [ 1.027671] ata3.00: ATA-8: ST3320613AS, SD22, max UDMA/133 [ 1.027677] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.027736] ata3.01: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 [ 1.083690] ata3.00: configured for UDMA/133 [ 1.096228] ata3.01: configured for UDMA/100 [ 1.096686] scsi 2:0:0:0: Direct-Access ATA ST3320613AS SD22 PQ: 0 ANSI: 5 [ 1.096825] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.097425] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.097480] sd 2:0:0:0: [sda] Write Protect is off [ 1.097482] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.097506] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.097641] sda: sda1 sda2 < [ 1.104473] scsi 2:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 [ 1.128675] sda5 sda6 sda7 sda8 > [ 1.178135] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.178141] Uniform CD-ROM driver Revision: 3.20 [ 1.178265] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.178289] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 1.178352] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 1.178381] Freeing unused kernel memory: 540k freed [ 1.178657] Write protecting the kernel text: 4568k [ 1.178698] Write protecting the kernel read-only data: 1836k [ 1.196525] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.303941] Linux agpgart interface v0.103 [ 1.306700] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 1.306933] agpgart-intel 0000:00:00.0: detected 7164K stolen memory [ 1.310040] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.354516] [drm] Initialized drm 1.1.0 20060810 [ 1.390533] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.390539] i915 0000:00:02.0: setting latency timer to 64 [ 1.392229] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 1.392234] [drm] MTRR allocation failed. Graphics performance may suffer. [ 1.392332] alloc irq_desc for 26 on node -1 [ 1.392335] alloc kstat_irqs on node -1 [ 1.392345] i915 0000:00:02.0: irq 26 for MSI/MSI-X [ 1.392793] intel drm CRTDDC_A: Test OK [ 1.402653] ATL1E 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.402670] ATL1E 0000:01:00.0: setting latency timer to 64 [ 1.404133] Floppy drive(s): fd0 is 1.44M [ 1.481579] usb 1-2: configuration #1 chosen from 1 choice [ 1.510387] FDC 0 is a post-1991 82077 [ 1.525335] [drm] fb0: inteldrmfb frame buffer device [ 1.525392] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.592018] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 1.592838] [drm] DAC-6: set mode 1920x1080 14 [ 1.620306] Console: switching to colour frame buffer device 240x67 [ 1.727612] usb 1-3: configuration #1 chosen from 1 choice [ 1.836550] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 1.991946] usb 1-4: configuration #1 chosen from 1 choice [ 2.012975] Initializing USB Mass Storage driver... [ 2.013584] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.013714] usb-storage: device found at 5 [ 2.013717] usb-storage: waiting for device to settle before scanning [ 2.013732] usbcore: registered new interface driver usb-storage [ 2.013736] USB Mass Storage support registered. [ 2.106318] PM: Starting manual resume from disk [ 2.106323] PM: Resume from partition 8:7 [ 2.106325] PM: Checking hibernation image. [ 2.106609] PM: Resume from disk failed. [ 2.108065] usb 1-6: new high speed USB device using ehci_hcd and address 6 [ 2.132357] EXT4-fs (sda6): barriers enabled [ 2.145340] kjournald2 starting: pid 409, dev sda6:8, commit interval 5 seconds [ 2.145362] EXT4-fs (sda6): delayed allocation enabled [ 2.145367] EXT4-fs: file extents enabled [ 2.148106] EXT4-fs: mballoc enabled [ 2.148120] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 2.426250] usb 1-6: configuration #1 chosen from 1 choice [ 2.514716] type=1505 audit(1258027547.177:2): operation="profile_load" pid=434 name=/usr/share/gdm/guest-session/Xsession [ 2.518231] type=1505 audit(1258027547.181:3): operation="profile_load" pid=435 name=/sbin/dhclient3 [ 2.518907] type=1505 audit(1258027547.181:4): operation="profile_load" pid=435 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 2.519269] type=1505 audit(1258027547.181:5): operation="profile_load" pid=435 name=/usr/lib/connman/scripts/dhclient-script [ 2.549725] type=1505 audit(1258027547.213:6): operation="profile_load" pid=436 name=/usr/bin/evince [ 2.560257] type=1505 audit(1258027547.225:7): operation="profile_load" pid=436 name=/usr/bin/evince-previewer [ 2.566482] type=1505 audit(1258027547.229:8): operation="profile_load" pid=436 name=/usr/bin/evince-thumbnailer [ 2.602701] type=1505 audit(1258027547.265:9): operation="profile_load" pid=438 name=/usr/lib/cups/backend/cups-pdf [ 2.603483] type=1505 audit(1258027547.265:10): operation="profile_load" pid=438 name=/usr/sbin/cupsd [ 2.672554] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 2.852588] usb 2-1: configuration #1 chosen from 1 choice [ 3.399266] Adding 4000144k swap on /dev/sda7. Priority:-1 extents:1 across:4000144k [ 3.620918] EXT4-fs (sda6): internal journal on sda6:8 [ 3.876357] EXT4-fs (sda8): barriers enabled [ 3.877791] kjournald2 starting: pid 492, dev sda8:8, commit interval 5 seconds [ 3.879774] EXT4-fs (sda8): internal journal on sda8:8 [ 3.879782] EXT4-fs (sda8): delayed allocation enabled [ 3.879787] EXT4-fs: file extents enabled [ 3.881302] EXT4-fs: mballoc enabled [ 3.881318] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 5.691229] __ratelimit: 3 callbacks suppressed [ 5.691233] type=1505 audit(1258020350.353:12): operation="profile_replace" pid=568 name=/usr/share/gdm/guest-session/Xsession [ 5.693258] type=1505 audit(1258020350.357:13): operation="profile_replace" pid=569 name=/sbin/dhclient3 [ 5.693930] type=1505 audit(1258020350.357:14): operation="profile_replace" pid=569 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.694315] type=1505 audit(1258020350.357:15): operation="profile_replace" pid=569 name=/usr/lib/connman/scripts/dhclient-script [ 5.698606] type=1505 audit(1258020350.361:16): operation="profile_replace" pid=570 name=/usr/bin/evince [ 5.709509] type=1505 audit(1258020350.373:17): operation="profile_replace" pid=570 name=/usr/bin/evince-previewer [ 5.715754] type=1505 audit(1258020350.377:18): operation="profile_replace" pid=570 name=/usr/bin/evince-thumbnailer [ 5.724900] type=1505 audit(1258020350.389:19): operation="profile_replace" pid=572 name=/usr/lib/cups/backend/cups-pdf [ 5.725687] type=1505 audit(1258020350.389:20): operation="profile_replace" pid=572 name=/usr/sbin/cupsd [ 5.728348] type=1505 audit(1258020350.393:21): operation="profile_replace" pid=573 name=/usr/sbin/tcpdump [ 6.242252] alloc irq_desc for 27 on node -1 [ 6.242256] alloc kstat_irqs on node -1 [ 6.242273] ATL1E 0000:01:00.0: irq 27 for MSI/MSI-X [ 6.242565] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.012755] usb-storage: device scan complete [ 7.016150] scsi 4:0:0:0: Direct-Access WDC WD10 EVDS-63N5B1 PQ: 0 ANSI: 2 [ 7.016574] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.017739] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 7.019979] sd 4:0:0:0: [sdb] Write Protect is off [ 7.019984] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 7.019988] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.023604] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.023611] sdb: [ 7.209795] udev: starting version 147 [ 8.632115] cfg80211: Calling CRDA to update world regulatory domain [ 8.946231] intel_rng: FWH not detected [ 9.227226] usbcore: registered new interface driver hiddev [ 9.227323] usbcore: registered new interface driver usbhid [ 9.227326] usbhid: v2.6:USB HID core driver [ 9.792124] cfg80211: World regulatory domain updated: [ 9.792128] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.792131] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.792133] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.792136] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.792138] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.792140] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.719781] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3 [ 12.719863] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.0-1/input0 [ 12.747447] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor [ 12.748403] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4 [ 12.748576] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.0-1/input1 [ 13.455869] parport_pc 00:07: reported by Plug and Play ACPI [ 13.455973] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 13.463227] ppdev: user-space parallel port driver [ 13.708003] sdb1 sdb2 < sdb5 sdb6 > [ 13.750735] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 13.750814] sd 4:0:0:0: [sdb] Attached SCSI disk [ 13.752831] lp0: using parport0 (interrupt-driven). [ 13.766577] Linux video capture interface: v2.00 [ 13.784974] bttv: driver version 0.9.18 loaded [ 13.784979] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 13.790580] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0804) [ 13.835001] input: UVC Camera (046d:0804) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input5 [ 13.835063] usbcore: registered new interface driver uvcvideo [ 13.835066] USB Video Class driver (v0.1.0) [ 14.208108] em28xx: New device USB 2881 Device @ 480 Mbps (eb1a:e310, interface 0, class 0) [ 14.213117] em28xx #0: chip ID is em2882/em2883 [ 14.370951] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 10 e3 d0 12 5c 03 6a 22 00 00 [ 14.370973] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 00 00 00 00 00 00 00 00 00 00 [ 14.370995] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 [ 14.371005] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [ 14.371016] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371026] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371036] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 14.371046] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00 [ 14.371056] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 14.371066] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371076] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371086] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371096] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371107] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371117] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371127] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371138] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x166a0441 [ 14.371139] em28xx #0: EEPROM info: [ 14.371141] em28xx #0: AC97 audio (5 sample rates) [ 14.371142] em28xx #0: 500mA max power [ 14.371144] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 [ 14.371823] em28xx #0: Identified as MSI DigiVox A/D (card=49) [ 14.377324] em28xx #0: found i2c device @ 0x1e [???] [ 14.401448] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 14.405948] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [ 14.407820] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [ 14.419074] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 14.419151] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 14.419196] em28xx #0: Please send an email with this log to: [ 14.419231] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> [ 14.419270] em28xx #0: Board eeprom hash is 0x166a0441 [ 14.419301] em28xx #0: Board i2c devicelist hash is 0x944d008f [ 14.419336] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 14.419383] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 14.419419] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 14.419458] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 14.419493] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 14.419525] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 14.419558] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 14.419589] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 14.419623] em28xx #0: card=7 -> Leadtek Winfast USB II [ 14.419656] em28xx #0: card=8 -> Kworld USB2800 [ 14.419686] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker [ 14.419741] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 14.419775] em28xx #0: card=11 -> Terratec Hybrid XS [ 14.419807] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 14.419840] em28xx #0: card=13 -> Terratec Prodigy XS [ 14.419873] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [ 14.419920] em28xx #0: card=15 -> V-Gear PocketTV [ 14.419951] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 14.419985] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 14.420021] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 14.420058] em28xx #0: card=19 -> EM2860/SAA711X Reference Design [ 14.420096] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 14.420131] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 14.420176] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber [ 14.420215] em28xx #0: card=23 -> Huaqi DLCW-130 [ 14.420246] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 14.420281] em28xx #0: card=25 -> Gadmei UTV310 [ 14.420311] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 14.420347] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 14.420388] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 14.420425] em28xx #0: card=29 -> <NULL> [ 14.420452] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 14.420488] em28xx #0: card=31 -> Usbgear VD204v9 [ 14.420529] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 14.420563] em28xx #0: card=33 -> <NULL> [ 14.420591] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 14.420629] em28xx #0: card=35 -> Typhoon DVD Maker [ 14.420662] em28xx #0: card=36 -> NetGMBH Cam [ 14.420691] em28xx #0: card=37 -> Gadmei UTV330 [ 14.420721] em28xx #0: card=38 -> Yakumo MovieMixer [ 14.420753] em28xx #0: card=39 -> KWorld PVRTV 300U [ 14.420785] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 14.420822] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 14.420855] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 14.420888] em28xx #0: card=43 -> Terratec Cinergy T XS [ 14.420922] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 14.420961] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 14.420994] em28xx #0: card=46 -> Compro, VideoMate U3 [ 14.421028] em28xx #0: card=47 -> KWorld DVB-T 305U [ 14.421060] em28xx #0: card=48 -> KWorld DVB-T 310U [ 14.421091] em28xx #0: card=49 -> MSI DigiVox A/D [ 14.421123] em28xx #0: card=50 -> MSI DigiVox A/D II [ 14.421156] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 14.421192] em28xx #0: card=52 -> DNT DA2 Hybrid [ 14.421223] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 14.421256] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 14.421290] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 14.421327] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 14.421362] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 14.421399] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 14.422785] em28xx #0: card=59 -> <NULL> [ 14.424148] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 [ 14.425503] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 [ 14.426837] em28xx #0: card=62 -> Gadmei TVR200 [ 14.428192] em28xx #0: card=63 -> Kaiomy TVnPC U2 [ 14.429532] em28xx #0: card=64 -> Easy Cap Capture DC-60 [ 14.430862] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ [ 14.432162] em28xx #0: card=66 -> Empire dual TV [ 14.433443] em28xx #0: card=67 -> Terratec Grabby [ 14.434719] em28xx #0: card=68 -> Terratec AV350 [ 14.435974] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box [ 14.437259] em28xx #0: card=70 -> Evga inDtube [ 14.438540] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix [ 14.512023] em28xx #0: [ 14.512026] [ 14.514643] em28xx #0: The support for this board weren't valid yet. [ 14.515984] em28xx #0: Please send a report of having this working [ 14.517287] em28xx #0: not to V4L mailing list (and/or to other addresses) [ 14.517289] [ 14.522754] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0) [ 15.386976] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.409262] tuner 1-0061: chip found @ 0xc2 (em28xx #0) [ 15.604631] xc2028 1-0061: creating new instance [ 15.604635] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 15.604646] usb 1-3: firmware: requesting xc3028-v27.fw [ 15.634622] xc2028 1-0061: Error: firmware xc3028-v27.fw not found. [ 15.636330] em28xx #0: Config register raw data: 0xd0 [ 15.637442] em28xx #0: AC97 vendor ID = 0x83847652 [ 15.637815] em28xx #0: AC97 features = 0x6a90 [ 15.637818] em28xx #0: Sigmatel audio processor detected(stac 9752) [ 15.683800] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.683839] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.760946] tvp5150 1-005c: tvp5150am1 detected. [ 15.877321] em28xx #0: v4l2 driver version 0.1.2 [ 15.960170] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 [ 15.976553] em28xx video device (eb1a:e310): interface 1, class 255 found. [ 15.978002] em28xx This is an anciliary interface not used by the driver [ 15.979572] usbcore: registered new interface driver em28xx [ 15.979576] em28xx driver loaded [ 16.080693] tvp5150 1-005c: tvp5150am1 detected. [ 16.188846] phy0: Selected rate control algorithm 'minstrel' [ 16.189581] Registered led device: rt2500usb-phy0::radio [ 16.189601] Registered led device: rt2500usb-phy0::quality [ 16.190124] usbcore: registered new interface driver rt2500usb [ 16.263369] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 16.263372] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 16.263719] Em28xx: Initialized (Em28xx Audio Extension) extension [ 16.277820] tvp5150 1-005c: tvp5150am1 detected. [ 16.728005] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.780097] usbcore: registered new interface driver snd-usb-audio [ 21.835611] CPU0 attaching NULL sched-domain. [ 21.835617] CPU1 attaching NULL sched-domain. [ 21.852630] CPU0 attaching sched-domain: [ 21.852634] domain 0: span 0-1 level MC [ 21.852637] groups: 0 1 [ 21.852641] domain 1: span 0-1 level CPU [ 21.852643] groups: 0-1 (__cpu_power = 2048) [ 21.852649] CPU1 attaching sched-domain: [ 21.852651] domain 0: span 0-1 level MC [ 21.852653] groups: 1 0 [ 21.852656] domain 1: span 0-1 level CPU [ 21.852658] groups: 0-1 (__cpu_power = 2048) [ 28.884740] CPU0 attaching NULL sched-domain. [ 28.884746] CPU1 attaching NULL sched-domain. [ 28.900638] CPU0 attaching sched-domain: [ 28.900645] domain 0: span 0-1 level MC [ 28.900650] groups: 0 1 [ 28.900659] CPU1 attaching sched-domain: [ 28.900663] domain 0: span 0-1 level MC [ 28.900667] groups: 1 0 [ 29.702286] [drm] DAC-6: set mode 15 [ 59.957012] wlan0: authenticate with AP 00:25:86:d0:af:f4 [ 59.958714] wlan0: authenticated [ 59.958719] wlan0: associate with AP 00:25:86:d0:af:f4 [ 59.961578] wlan0: RX AssocResp from 00:25:86:d0:af:f4 (capab=0x431 status=0 aid=1) [ 59.961582] wlan0: associated [ 59.967481] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 60.236879] padlock: VIA PadLock not detected. [ 70.556519] wlan0: no IPv6 routers present [ 2128.417974] usb 1-3: USB disconnect, address 4 [ 2128.418110] em28xx #0: disconnecting em28xx #0 video [ 2128.418116] em28xx #0: V4L2 device /dev/vbi0 deregistered [ 2128.418207] em28xx #0: V4L2 device /dev/video1 deregistered [ 2128.418355] xc2028 1-0061: destroying instance

στη dmesg

Κώδικας: Επιλογή όλων: [ 0.447337] ACPI: Power Button [PWRB] [ 0.447884] ACPI: SSDT df6a00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.448200] processor LNXCPU:00: registered as cooling_device0 [ 0.448480] ACPI: SSDT df6a0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.448761] processor LNXCPU:01: registered as cooling_device1 [ 0.451047] isapnp: Scanning for PnP cards... [ 0.501344] Switched to high resolution mode on CPU 1 [ 0.504037] Switched to high resolution mode on CPU 0 [ 0.803981] isapnp: No Plug & Play device found [ 0.805086] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.805187] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.805674] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.806632] brd: module loaded [ 0.807063] loop: module loaded [ 0.807142] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.807246] ata_piix 0000:00:1f.1: version 2.13 [ 0.807260] alloc irq_desc for 18 on node -1 [ 0.807262] alloc kstat_irqs on node -1 [ 0.807271] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.807309] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.807388] scsi0 : ata_piix [ 0.807491] scsi1 : ata_piix [ 0.808613] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.808616] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.808646] alloc irq_desc for 19 on node -1 [ 0.808648] alloc kstat_irqs on node -1 [ 0.808655] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.808662] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.808702] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.808770] scsi2 : ata_piix [ 0.808832] scsi3 : ata_piix [ 0.810111] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 [ 0.810114] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 [ 0.810896] Fixed MDIO Bus: probed [ 0.810927] PPP generic driver version 2.4.2 [ 0.811036] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.811059] alloc irq_desc for 23 on node -1 [ 0.811061] alloc kstat_irqs on node -1 [ 0.811068] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.811082] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.811086] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.811138] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.815047] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.815052] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.815068] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00 [ 0.828034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.828169] usb usb1: configuration #1 chosen from 1 choice [ 0.828217] hub 1-0:1.0: USB hub found [ 0.828225] hub 1-0:1.0: 8 ports detected [ 0.828299] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.828321] uhci_hcd: USB Universal Host Controller Interface driver [ 0.828358] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.828365] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.828368] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.828407] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.828432] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 0.828519] usb usb2: configuration #1 chosen from 1 choice [ 0.828544] hub 2-0:1.0: USB hub found [ 0.828550] hub 2-0:1.0: 2 ports detected [ 0.828600] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.828606] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.828609] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.828643] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.828666] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 0.828745] usb usb3: configuration #1 chosen from 1 choice [ 0.828772] hub 3-0:1.0: USB hub found [ 0.828778] hub 3-0:1.0: 2 ports detected [ 0.828826] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.828832] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.828835] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.828871] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.828901] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 0.828981] usb usb4: configuration #1 chosen from 1 choice [ 0.829007] hub 4-0:1.0: USB hub found [ 0.829013] hub 4-0:1.0: 2 ports detected [ 0.829065] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.829072] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.829075] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.829109] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.829140] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 0.829224] usb usb5: configuration #1 chosen from 1 choice [ 0.829249] hub 5-0:1.0: USB hub found [ 0.829255] hub 5-0:1.0: 2 ports detected [ 0.829362] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.831654] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.831660] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.831725] mice: PS/2 mouse device common for all mice [ 0.831818] rtc_cmos 00:03: RTC can wake from S4 [ 0.831856] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.831880] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.831986] device-mapper: uevent: version 1.0.3 [ 0.832106] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.832182] device-mapper: multipath: version 1.1.0 loaded [ 0.832185] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.832310] EISA: Probing bus 0 at eisa.0 [ 0.832336] EISA: Detected 0 cards. [ 0.832420] cpuidle: using governor ladder [ 0.832422] cpuidle: using governor menu [ 0.832906] TCP cubic registered [ 0.833055] NET: Registered protocol family 10 [ 0.833493] lo: Disabled Privacy Extensions [ 0.833807] NET: Registered protocol family 17 [ 0.833830] Bluetooth: L2CAP ver 2.13 [ 0.833831] Bluetooth: L2CAP socket layer initialized [ 0.833834] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.833835] Bluetooth: SCO socket layer initialized [ 0.833879] Bluetooth: RFCOMM TTY layer initialized [ 0.833883] Bluetooth: RFCOMM socket layer initialized [ 0.833885] Bluetooth: RFCOMM ver 1.11 [ 0.834292] Using IPI No-Shortcut mode [ 0.834363] PM: Resume from disk failed. [ 0.834376] registered taskstats version 1 [ 0.834478] Magic number: 1:716:76 [ 0.834547] rtc_cmos 00:03: setting system clock to 2009-11-12 12:05:45 UTC (1258027545) [ 0.834550] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.834552] EDD information not available. [ 1.027671] ata3.00: ATA-8: ST3320613AS, SD22, max UDMA/133 [ 1.027677] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.027736] ata3.01: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 [ 1.083690] ata3.00: configured for UDMA/133 [ 1.096228] ata3.01: configured for UDMA/100 [ 1.096686] scsi 2:0:0:0: Direct-Access ATA ST3320613AS SD22 PQ: 0 ANSI: 5 [ 1.096825] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.097425] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.097480] sd 2:0:0:0: [sda] Write Protect is off [ 1.097482] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.097506] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.097641] sda: sda1 sda2 < [ 1.104473] scsi 2:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 [ 1.128675] sda5 sda6 sda7 sda8 > [ 1.178135] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.178141] Uniform CD-ROM driver Revision: 3.20 [ 1.178265] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.178289] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 1.178352] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 1.178381] Freeing unused kernel memory: 540k freed [ 1.178657] Write protecting the kernel text: 4568k [ 1.178698] Write protecting the kernel read-only data: 1836k [ 1.196525] usb 1-2: new high speed USB device using ehci_hcd and address 3 [ 1.303941] Linux agpgart interface v0.103 [ 1.306700] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 1.306933] agpgart-intel 0000:00:00.0: detected 7164K stolen memory [ 1.310040] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.354516] [drm] Initialized drm 1.1.0 20060810 [ 1.390533] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.390539] i915 0000:00:02.0: setting latency timer to 64 [ 1.392229] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 1.392234] [drm] MTRR allocation failed. Graphics performance may suffer. [ 1.392332] alloc irq_desc for 26 on node -1 [ 1.392335] alloc kstat_irqs on node -1 [ 1.392345] i915 0000:00:02.0: irq 26 for MSI/MSI-X [ 1.392793] intel drm CRTDDC_A: Test OK [ 1.402653] ATL1E 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.402670] ATL1E 0000:01:00.0: setting latency timer to 64 [ 1.404133] Floppy drive(s): fd0 is 1.44M [ 1.481579] usb 1-2: configuration #1 chosen from 1 choice [ 1.510387] FDC 0 is a post-1991 82077 [ 1.525335] [drm] fb0: inteldrmfb frame buffer device [ 1.525392] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.592018] usb 1-3: new high speed USB device using ehci_hcd and address 4 [ 1.592838] [drm] DAC-6: set mode 1920x1080 14 [ 1.620306] Console: switching to colour frame buffer device 240x67 [ 1.727612] usb 1-3: configuration #1 chosen from 1 choice [ 1.836550] usb 1-4: new high speed USB device using ehci_hcd and address 5 [ 1.991946] usb 1-4: configuration #1 chosen from 1 choice [ 2.012975] Initializing USB Mass Storage driver... [ 2.013584] scsi4 : SCSI emulation for USB Mass Storage devices [ 2.013714] usb-storage: device found at 5 [ 2.013717] usb-storage: waiting for device to settle before scanning [ 2.013732] usbcore: registered new interface driver usb-storage [ 2.013736] USB Mass Storage support registered. [ 2.106318] PM: Starting manual resume from disk [ 2.106323] PM: Resume from partition 8:7 [ 2.106325] PM: Checking hibernation image. [ 2.106609] PM: Resume from disk failed. [ 2.108065] usb 1-6: new high speed USB device using ehci_hcd and address 6 [ 2.132357] EXT4-fs (sda6): barriers enabled [ 2.145340] kjournald2 starting: pid 409, dev sda6:8, commit interval 5 seconds [ 2.145362] EXT4-fs (sda6): delayed allocation enabled [ 2.145367] EXT4-fs: file extents enabled [ 2.148106] EXT4-fs: mballoc enabled [ 2.148120] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 2.426250] usb 1-6: configuration #1 chosen from 1 choice [ 2.514716] type=1505 audit(1258027547.177:2): operation="profile_load" pid=434 name=/usr/share/gdm/guest-session/Xsession [ 2.518231] type=1505 audit(1258027547.181:3): operation="profile_load" pid=435 name=/sbin/dhclient3 [ 2.518907] type=1505 audit(1258027547.181:4): operation="profile_load" pid=435 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 2.519269] type=1505 audit(1258027547.181:5): operation="profile_load" pid=435 name=/usr/lib/connman/scripts/dhclient-script [ 2.549725] type=1505 audit(1258027547.213:6): operation="profile_load" pid=436 name=/usr/bin/evince [ 2.560257] type=1505 audit(1258027547.225:7): operation="profile_load" pid=436 name=/usr/bin/evince-previewer [ 2.566482] type=1505 audit(1258027547.229:8): operation="profile_load" pid=436 name=/usr/bin/evince-thumbnailer [ 2.602701] type=1505 audit(1258027547.265:9): operation="profile_load" pid=438 name=/usr/lib/cups/backend/cups-pdf [ 2.603483] type=1505 audit(1258027547.265:10): operation="profile_load" pid=438 name=/usr/sbin/cupsd [ 2.672554] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 2.852588] usb 2-1: configuration #1 chosen from 1 choice [ 3.399266] Adding 4000144k swap on /dev/sda7. Priority:-1 extents:1 across:4000144k [ 3.620918] EXT4-fs (sda6): internal journal on sda6:8 [ 3.876357] EXT4-fs (sda8): barriers enabled [ 3.877791] kjournald2 starting: pid 492, dev sda8:8, commit interval 5 seconds [ 3.879774] EXT4-fs (sda8): internal journal on sda8:8 [ 3.879782] EXT4-fs (sda8): delayed allocation enabled [ 3.879787] EXT4-fs: file extents enabled [ 3.881302] EXT4-fs: mballoc enabled [ 3.881318] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 5.691229] __ratelimit: 3 callbacks suppressed [ 5.691233] type=1505 audit(1258020350.353:12): operation="profile_replace" pid=568 name=/usr/share/gdm/guest-session/Xsession [ 5.693258] type=1505 audit(1258020350.357:13): operation="profile_replace" pid=569 name=/sbin/dhclient3 [ 5.693930] type=1505 audit(1258020350.357:14): operation="profile_replace" pid=569 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 5.694315] type=1505 audit(1258020350.357:15): operation="profile_replace" pid=569 name=/usr/lib/connman/scripts/dhclient-script [ 5.698606] type=1505 audit(1258020350.361:16): operation="profile_replace" pid=570 name=/usr/bin/evince [ 5.709509] type=1505 audit(1258020350.373:17): operation="profile_replace" pid=570 name=/usr/bin/evince-previewer [ 5.715754] type=1505 audit(1258020350.377:18): operation="profile_replace" pid=570 name=/usr/bin/evince-thumbnailer [ 5.724900] type=1505 audit(1258020350.389:19): operation="profile_replace" pid=572 name=/usr/lib/cups/backend/cups-pdf [ 5.725687] type=1505 audit(1258020350.389:20): operation="profile_replace" pid=572 name=/usr/sbin/cupsd [ 5.728348] type=1505 audit(1258020350.393:21): operation="profile_replace" pid=573 name=/usr/sbin/tcpdump [ 6.242252] alloc irq_desc for 27 on node -1 [ 6.242256] alloc kstat_irqs on node -1 [ 6.242273] ATL1E 0000:01:00.0: irq 27 for MSI/MSI-X [ 6.242565] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.012755] usb-storage: device scan complete [ 7.016150] scsi 4:0:0:0: Direct-Access WDC WD10 EVDS-63N5B1 PQ: 0 ANSI: 2 [ 7.016574] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 7.017739] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 7.019979] sd 4:0:0:0: [sdb] Write Protect is off [ 7.019984] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 7.019988] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.023604] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 7.023611] sdb: [ 7.209795] udev: starting version 147 [ 8.632115] cfg80211: Calling CRDA to update world regulatory domain [ 8.946231] intel_rng: FWH not detected [ 9.227226] usbcore: registered new interface driver hiddev [ 9.227323] usbcore: registered new interface driver usbhid [ 9.227326] usbhid: v2.6:USB HID core driver [ 9.792124] cfg80211: World regulatory domain updated: [ 9.792128] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 9.792131] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.792133] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.792136] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 9.792138] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 9.792140] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.719781] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3 [ 12.719863] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.0-1/input0 [ 12.747447] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor [ 12.748403] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4 [ 12.748576] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.0-1/input1 [ 13.455869] parport_pc 00:07: reported by Plug and Play ACPI [ 13.455973] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 13.463227] ppdev: user-space parallel port driver [ 13.708003] sdb1 sdb2 < sdb5 sdb6 > [ 13.750735] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 13.750814] sd 4:0:0:0: [sdb] Attached SCSI disk [ 13.752831] lp0: using parport0 (interrupt-driven). [ 13.766577] Linux video capture interface: v2.00 [ 13.784974] bttv: driver version 0.9.18 loaded [ 13.784979] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 13.790580] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0804) [ 13.835001] input: UVC Camera (046d:0804) as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input5 [ 13.835063] usbcore: registered new interface driver uvcvideo [ 13.835066] USB Video Class driver (v0.1.0) [ 14.208108] em28xx: New device USB 2881 Device @ 480 Mbps (eb1a:e310, interface 0, class 0) [ 14.213117] em28xx #0: chip ID is em2882/em2883 [ 14.370951] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 10 e3 d0 12 5c 03 6a 22 00 00 [ 14.370973] em28xx #0: i2c eeprom 10: 00 00 04 57 4e 07 00 00 00 00 00 00 00 00 00 00 [ 14.370995] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 01 00 00 00 00 00 5b 1e 00 00 [ 14.371005] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 [ 14.371016] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371026] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371036] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 22 03 55 00 53 00 [ 14.371046] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 44 00 [ 14.371056] em28xx #0: i2c eeprom 80: 65 00 76 00 69 00 63 00 65 00 00 00 00 00 00 00 [ 14.371066] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371076] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371086] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371096] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371107] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371117] em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371127] em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 14.371138] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x166a0441 [ 14.371139] em28xx #0: EEPROM info: [ 14.371141] em28xx #0: AC97 audio (5 sample rates) [ 14.371142] em28xx #0: 500mA max power [ 14.371144] em28xx #0: Table at 0x04, strings=0x226a, 0x0000, 0x0000 [ 14.371823] em28xx #0: Identified as MSI DigiVox A/D (card=49) [ 14.377324] em28xx #0: found i2c device @ 0x1e [???] [ 14.401448] em28xx #0: found i2c device @ 0xa0 [eeprom] [ 14.405948] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [ 14.407820] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [ 14.419074] em28xx #0: Your board has no unique USB ID and thus need a hint to be detected. [ 14.419151] em28xx #0: You may try to use card=<n> insmod option to workaround that. [ 14.419196] em28xx #0: Please send an email with this log to: [ 14.419231] em28xx #0: V4L Mailing List <linux-media@vger.kernel.org> [ 14.419270] em28xx #0: Board eeprom hash is 0x166a0441 [ 14.419301] em28xx #0: Board i2c devicelist hash is 0x944d008f [ 14.419336] em28xx #0: Here is a list of valid choices for the card=<n> insmod option: [ 14.419383] em28xx #0: card=0 -> Unknown EM2800 video grabber [ 14.419419] em28xx #0: card=1 -> Unknown EM2750/28xx video grabber [ 14.419458] em28xx #0: card=2 -> Terratec Cinergy 250 USB [ 14.419493] em28xx #0: card=3 -> Pinnacle PCTV USB 2 [ 14.419525] em28xx #0: card=4 -> Hauppauge WinTV USB 2 [ 14.419558] em28xx #0: card=5 -> MSI VOX USB 2.0 [ 14.419589] em28xx #0: card=6 -> Terratec Cinergy 200 USB [ 14.419623] em28xx #0: card=7 -> Leadtek Winfast USB II [ 14.419656] em28xx #0: card=8 -> Kworld USB2800 [ 14.419686] em28xx #0: card=9 -> Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker [ 14.419741] em28xx #0: card=10 -> Hauppauge WinTV HVR 900 [ 14.419775] em28xx #0: card=11 -> Terratec Hybrid XS [ 14.419807] em28xx #0: card=12 -> Kworld PVR TV 2800 RF [ 14.419840] em28xx #0: card=13 -> Terratec Prodigy XS [ 14.419873] em28xx #0: card=14 -> SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0 [ 14.419920] em28xx #0: card=15 -> V-Gear PocketTV [ 14.419951] em28xx #0: card=16 -> Hauppauge WinTV HVR 950 [ 14.419985] em28xx #0: card=17 -> Pinnacle PCTV HD Pro Stick [ 14.420021] em28xx #0: card=18 -> Hauppauge WinTV HVR 900 (R2) [ 14.420058] em28xx #0: card=19 -> EM2860/SAA711X Reference Design [ 14.420096] em28xx #0: card=20 -> AMD ATI TV Wonder HD 600 [ 14.420131] em28xx #0: card=21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder [ 14.420176] em28xx #0: card=22 -> EM2710/EM2750/EM2751 webcam grabber [ 14.420215] em28xx #0: card=23 -> Huaqi DLCW-130 [ 14.420246] em28xx #0: card=24 -> D-Link DUB-T210 TV Tuner [ 14.420281] em28xx #0: card=25 -> Gadmei UTV310 [ 14.420311] em28xx #0: card=26 -> Hercules Smart TV USB 2.0 [ 14.420347] em28xx #0: card=27 -> Pinnacle PCTV USB 2 (Philips FM1216ME) [ 14.420388] em28xx #0: card=28 -> Leadtek Winfast USB II Deluxe [ 14.420425] em28xx #0: card=29 -> <NULL> [ 14.420452] em28xx #0: card=30 -> Videology 20K14XUSB USB2.0 [ 14.420488] em28xx #0: card=31 -> Usbgear VD204v9 [ 14.420529] em28xx #0: card=32 -> Supercomp USB 2.0 TV [ 14.420563] em28xx #0: card=33 -> <NULL> [ 14.420591] em28xx #0: card=34 -> Terratec Cinergy A Hybrid XS [ 14.420629] em28xx #0: card=35 -> Typhoon DVD Maker [ 14.420662] em28xx #0: card=36 -> NetGMBH Cam [ 14.420691] em28xx #0: card=37 -> Gadmei UTV330 [ 14.420721] em28xx #0: card=38 -> Yakumo MovieMixer [ 14.420753] em28xx #0: card=39 -> KWorld PVRTV 300U [ 14.420785] em28xx #0: card=40 -> Plextor ConvertX PX-TV100U [ 14.420822] em28xx #0: card=41 -> Kworld 350 U DVB-T [ 14.420855] em28xx #0: card=42 -> Kworld 355 U DVB-T [ 14.420888] em28xx #0: card=43 -> Terratec Cinergy T XS [ 14.420922] em28xx #0: card=44 -> Terratec Cinergy T XS (MT2060) [ 14.420961] em28xx #0: card=45 -> Pinnacle PCTV DVB-T [ 14.420994] em28xx #0: card=46 -> Compro, VideoMate U3 [ 14.421028] em28xx #0: card=47 -> KWorld DVB-T 305U [ 14.421060] em28xx #0: card=48 -> KWorld DVB-T 310U [ 14.421091] em28xx #0: card=49 -> MSI DigiVox A/D [ 14.421123] em28xx #0: card=50 -> MSI DigiVox A/D II [ 14.421156] em28xx #0: card=51 -> Terratec Hybrid XS Secam [ 14.421192] em28xx #0: card=52 -> DNT DA2 Hybrid [ 14.421223] em28xx #0: card=53 -> Pinnacle Hybrid Pro [ 14.421256] em28xx #0: card=54 -> Kworld VS-DVB-T 323UR [ 14.421290] em28xx #0: card=55 -> Terratec Hybrid XS (em2882) [ 14.421327] em28xx #0: card=56 -> Pinnacle Hybrid Pro (2) [ 14.421362] em28xx #0: card=57 -> Kworld PlusTV HD Hybrid 330 [ 14.421399] em28xx #0: card=58 -> Compro VideoMate ForYou/Stereo [ 14.422785] em28xx #0: card=59 -> <NULL> [ 14.424148] em28xx #0: card=60 -> Hauppauge WinTV HVR 850 [ 14.425503] em28xx #0: card=61 -> Pixelview PlayTV Box 4 USB 2.0 [ 14.426837] em28xx #0: card=62 -> Gadmei TVR200 [ 14.428192] em28xx #0: card=63 -> Kaiomy TVnPC U2 [ 14.429532] em28xx #0: card=64 -> Easy Cap Capture DC-60 [ 14.430862] em28xx #0: card=65 -> IO-DATA GV-MVP/SZ [ 14.432162] em28xx #0: card=66 -> Empire dual TV [ 14.433443] em28xx #0: card=67 -> Terratec Grabby [ 14.434719] em28xx #0: card=68 -> Terratec AV350 [ 14.435974] em28xx #0: card=69 -> KWorld ATSC 315U HDTV TV Box [ 14.437259] em28xx #0: card=70 -> Evga inDtube [ 14.438540] em28xx #0: card=71 -> Silvercrest Webcam 1.3mpix [ 14.512023] em28xx #0: [ 14.512026] [ 14.514643] em28xx #0: The support for this board weren't valid yet. [ 14.515984] em28xx #0: Please send a report of having this working [ 14.517287] em28xx #0: not to V4L mailing list (and/or to other addresses) [ 14.517289] [ 14.522754] tvp5150 1-005c: chip found @ 0xb8 (em28xx #0) [ 15.386976] ip_tables: (C) 2000-2006 Netfilter Core Team [ 15.409262] tuner 1-0061: chip found @ 0xc2 (em28xx #0) [ 15.604631] xc2028 1-0061: creating new instance [ 15.604635] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner [ 15.604646] usb 1-3: firmware: requesting xc3028-v27.fw [ 15.634622] xc2028 1-0061: Error: firmware xc3028-v27.fw not found. [ 15.636330] em28xx #0: Config register raw data: 0xd0 [ 15.637442] em28xx #0: AC97 vendor ID = 0x83847652 [ 15.637815] em28xx #0: AC97 features = 0x6a90 [ 15.637818] em28xx #0: Sigmatel audio processor detected(stac 9752) [ 15.683800] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 15.683839] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 15.760946] tvp5150 1-005c: tvp5150am1 detected. [ 15.877321] em28xx #0: v4l2 driver version 0.1.2 [ 15.960170] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 [ 15.976553] em28xx video device (eb1a:e310): interface 1, class 255 found. [ 15.978002] em28xx This is an anciliary interface not used by the driver [ 15.979572] usbcore: registered new interface driver em28xx [ 15.979576] em28xx driver loaded [ 16.080693] tvp5150 1-005c: tvp5150am1 detected. [ 16.188846] phy0: Selected rate control algorithm 'minstrel' [ 16.189581] Registered led device: rt2500usb-phy0::radio [ 16.189601] Registered led device: rt2500usb-phy0::quality [ 16.190124] usbcore: registered new interface driver rt2500usb [ 16.263369] em28xx-audio.c: probing for em28x1 non standard usbaudio [ 16.263372] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger [ 16.263719] Em28xx: Initialized (Em28xx Audio Extension) extension [ 16.277820] tvp5150 1-005c: tvp5150am1 detected. [ 16.728005] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 16.780097] usbcore: registered new interface driver snd-usb-audio [ 21.835611] CPU0 attaching NULL sched-domain. [ 21.835617] CPU1 attaching NULL sched-domain. [ 21.852630] CPU0 attaching sched-domain: [ 21.852634] domain 0: span 0-1 level MC [ 21.852637] groups: 0 1 [ 21.852641] domain 1: span 0-1 level CPU [ 21.852643] groups: 0-1 (__cpu_power = 2048) [ 21.852649] CPU1 attaching sched-domain: [ 21.852651] domain 0: span 0-1 level MC [ 21.852653] groups: 1 0 [ 21.852656] domain 1: span 0-1 level CPU [ 21.852658] groups: 0-1 (__cpu_power = 2048) [ 28.884740] CPU0 attaching NULL sched-domain. [ 28.884746] CPU1 attaching NULL sched-domain. [ 28.900638] CPU0 attaching sched-domain: [ 28.900645] domain 0: span 0-1 level MC [ 28.900650] groups: 0 1 [ 28.900659] CPU1 attaching sched-domain: [ 28.900663] domain 0: span 0-1 level MC [ 28.900667] groups: 1 0 [ 29.702286] [drm] DAC-6: set mode 15 [ 59.957012] wlan0: authenticate with AP 00:25:86:d0:af:f4 [ 59.958714] wlan0: authenticated [ 59.958719] wlan0: associate with AP 00:25:86:d0:af:f4 [ 59.961578] wlan0: RX AssocResp from 00:25:86:d0:af:f4 (capab=0x431 status=0 aid=1) [ 59.961582] wlan0: associated [ 59.967481] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 60.236879] padlock: VIA PadLock not detected. [ 70.556519] wlan0: no IPv6 routers present [ 2128.417974] usb 1-3: USB disconnect, address 4 [ 2128.418110] em28xx #0: disconnecting em28xx #0 video [ 2128.418116] em28xx #0: V4L2 device /dev/vbi0 deregistered [ 2128.418207] em28xx #0: V4L2 device /dev/video1 deregistered [ 2128.418355] xc2028 1-0061: destroying instance

Κάποια κομμάτια output της εντολής πρέπει να λείπουν (δεν χωράγαν στο τερματικό), δεν το έμαθα ακόμη το probe. Ελπίζω να αρκούν αυτά, αλλιώς να το "μάθω" τώρα... :cry:

Το TVTime δεν βλέπει hardware input (No video source)
Το xawTV βλέπει μόνο Hardware1 (WebCamera) με κανονική εικόνα από την cam

Να πω τη ζαβολιά μου, πριν δώσω τις εντολές είχα μόλις τραβήξει τη USB KWorld :roll:

Ευχαριστώ για τη βοήθεια.
??

από **logari81** » 12 Νοέμ 2009, 14:29

Να το παρουμε από την αρχη.
1) Αποσυνδεσε την webcam και την usb καρτα τηλεόρασης
2) Κανε επανεκκίνηση
3) Δοκιμασε το tvtime και το xawtv
4) Αν δεν εχεις εικόνα, τρεξε τις εντολές

Κώδικας: Επιλογή όλων: lspci -nn dmesg

και δώσε μας τα αποτελεσματα.

από **petsam** » 12 Νοέμ 2009, 15:18

To TVTime δεν εχει Video Source
To xawtv από μενού δεν ανοίγει. Από τερματικό δίνει

Κώδικας: Επιλογή όλων: petros@petros-desktop:~$ xawtv This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.31-14-generic) xinerama 0: 1680x1050+0+0 WARNING: No DGA direct video mode for this display. can't open /dev/video0: No such file or directory v4l-conf had some trouble, trying to continue anyway v4l2: open /dev/video0: No such file or directory v4l2: open /dev/video0: No such file or directory v4l: open /dev/video0: No such file or directory no video grabber device available

Κώδικας: Επιλογή όλων: petros@petros-desktop:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 10) 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express Integrated Graphics Controller [8086:29c2] (rev 10) 00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 [8086:27c9] (rev 01) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 [8086:27ca] (rev 01) 00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 [8086:27cb] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01) 00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller [8086:27c0] (rev 01) 00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller [8086:27da] (rev 01) 01:00.0 Ethernet controller [0200]: Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller [1969:1026] (rev b0)

Κώδικας: Επιλογή όλων: [ 0.001332] Console: colour VGA+ 80x25 [ 0.001336] console [tty0] enabled [ 0.001476] hpet clockevent registered [ 0.001480] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.001485] Calibrating delay loop (skipped), value calculated using timer frequency.. 4436.08 BogoMIPS (lpj=8872160) [ 0.001501] Security Framework initialized [ 0.001517] AppArmor: AppArmor initialized [ 0.001524] Mount-cache hash table entries: 512 [ 0.001639] Initializing cgroup subsys ns [ 0.001643] Initializing cgroup subsys cpuacct [ 0.001647] Initializing cgroup subsys memory [ 0.001653] Initializing cgroup subsys freezer [ 0.001655] Initializing cgroup subsys net_cls [ 0.001668] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.001670] CPU: L2 cache: 512K [ 0.001673] CPU: Physical Processor ID: 0 [ 0.001674] CPU: Processor Core ID: 0 [ 0.001678] mce: CPU supports 6 MCE banks [ 0.001685] CPU0: Thermal monitoring enabled (TM2) [ 0.001688] using mwait in idle threads. [ 0.001693] Performance Counters: Core2 events, Intel PMU driver. [ 0.001701] ... version: 2 [ 0.001702] ... bit width: 40 [ 0.001704] ... generic counters: 2 [ 0.001706] ... value mask: 000000ffffffffff [ 0.001707] ... max period: 000000007fffffff [ 0.001709] ... fixed-purpose counters: 3 [ 0.001710] ... counter mask: 0000000700000003 [ 0.001714] Checking 'hlt' instruction... OK. [ 0.018436] ACPI: Core revision 20090521 [ 0.028365] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071350] CPU0: Intel(R) Celeron(R) CPU E1500 @ 2.20GHz stepping 0d [ 0.072001] APIC calibration not consistent with PM-Timer: 139ms instead of 100ms [ 0.072001] APIC delta adjusted to PM-Timer: 1260325 (1764439) [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 4436.40 BogoMIPS (lpj=8872801) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.157215] CPU1: Intel(R) Celeron(R) CPU E1500 @ 2.20GHz stepping 0d [ 0.157227] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160021] Brought up 2 CPUs [ 0.160023] Total of 2 processors activated (8872.48 BogoMIPS). [ 0.160066] CPU0 attaching sched-domain: [ 0.160069] domain 0: span 0-1 level MC [ 0.160071] groups: 0 1 [ 0.160077] CPU1 attaching sched-domain: [ 0.160079] domain 0: span 0-1 level MC [ 0.160081] groups: 1 0 [ 0.160153] Booting paravirtualized kernel on bare hardware [ 0.160198] regulator: core version 0.5 [ 0.160198] Time: 14:06:33 Date: 11/12/09 [ 0.160198] NET: Registered protocol family 16 [ 0.160201] EISA bus registered [ 0.160213] ACPI: bus type pci registered [ 0.160278] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.160281] PCI: Not using MMCONFIG. [ 0.160430] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3 [ 0.160432] PCI: Using configuration type 1 for base access [ 0.161402] bio: create slab <bio-0> at 0 [ 0.164140] ACPI: EC: Look up EC in DSDT [ 0.172189] ACPI: Interpreter enabled [ 0.172198] ACPI: (supports S0 S1 S3 S4 S5) [ 0.172221] ACPI: Using IOAPIC for interrupt routing [ 0.172272] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 [ 0.175290] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources [ 0.175292] PCI: Using MMCONFIG for extended config space [ 0.182889] ACPI Warning: Incorrect checksum in table [OEMB] - FB, should be EE 20090521 tbutils-246 [ 0.183684] ACPI: No dock devices found. [ 0.183803] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.183895] pci 0000:00:02.0: reg 10 32bit mmio: [0xfea80000-0xfeafffff] [ 0.183900] pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07] [ 0.183905] pci 0000:00:02.0: reg 18 32bit mmio: [0xe0000000-0xefffffff] [ 0.183910] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe900000-0xfe9fffff] [ 0.183988] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfea78000-0xfea7bfff] [ 0.184046] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.184050] pci 0000:00:1b.0: PME# disabled [ 0.184109] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.184112] pci 0000:00:1c.0: PME# disabled [ 0.184172] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.184176] pci 0000:00:1c.1: PME# disabled [ 0.184225] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f] [ 0.184273] pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f] [ 0.184321] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f] [ 0.184369] pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f] [ 0.184422] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfea77c00-0xfea77fff] [ 0.184473] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.184477] pci 0000:00:1d.7: PME# disabled [ 0.184596] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.184600] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO [ 0.184603] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.184646] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.184652] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.184659] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7] [ 0.184665] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb] [ 0.184672] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.184714] pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087] [ 0.184720] pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003] [ 0.184726] pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07] [ 0.184732] pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883] [ 0.184737] pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f] [ 0.184761] pci 0000:00:1f.2: PME# supported from D3hot [ 0.184765] pci 0000:00:1f.2: PME# disabled [ 0.184809] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.184930] pci 0000:01:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff] [ 0.184938] pci 0000:01:00.0: reg 18 io port: [0xec00-0xec7f] [ 0.184998] pci 0000:01:00.0: PME# supported from D3hot D3cold [ 0.185003] pci 0000:01:00.0: PME# disabled [ 0.185054] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.185058] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff] [ 0.185109] pci 0000:00:1e.0: transparent bridge [ 0.185131] pci_bus 0000:00: on NUMA node 0 [ 0.185138] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.185276] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.185369] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.185425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT] [ 0.193763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.193874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.193980] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.194085] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.194189] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.194296] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.194403] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.194513] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.194700] SCSI subsystem initialized [ 0.194739] libata version 3.00 loaded. [ 0.194739] usbcore: registered new interface driver usbfs [ 0.194739] usbcore: registered new interface driver hub [ 0.194739] usbcore: registered new device driver usb [ 0.194739] ACPI: WMI: Mapper loaded [ 0.194739] PCI: Using ACPI for IRQ routing [ 0.204013] Bluetooth: Core ver 2.15 [ 0.204044] NET: Registered protocol family 31 [ 0.204044] Bluetooth: HCI device and connection manager initialized [ 0.204044] Bluetooth: HCI socket layer initialized [ 0.204044] NetLabel: Initializing [ 0.204044] NetLabel: domain hash size = 128 [ 0.204044] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.204056] NetLabel: unlabeled traffic allowed by default [ 0.204103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.204112] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.220058] pnp: PnP ACPI init [ 0.220084] ACPI: bus type pnp registered [ 0.224311] pnp: PnP ACPI: found 19 devices [ 0.224314] ACPI: ACPI bus type pnp unregistered [ 0.224318] PnPBIOS: Disabled by ACPI PNP [ 0.224331] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.224340] system 00:08: ioport range 0x290-0x297 has been reserved [ 0.224346] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.224349] system 00:09: ioport range 0x800-0x87f has been reserved [ 0.224351] system 00:09: ioport range 0x480-0x4bf has been reserved [ 0.224354] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.224357] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.224363] system 00:0c: iomem range 0xffc00000-0xffefffff has been reserved [ 0.224368] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.224371] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.224377] system 00:11: iomem range 0xf0000000-0xf3ffffff has been reserved [ 0.224383] system 00:12: iomem range 0x0-0x9ffff could not be reserved [ 0.224385] system 00:12: iomem range 0xc0000-0xcffff could not be reserved [ 0.224388] system 00:12: iomem range 0xe0000-0xfffff could not be reserved [ 0.224391] system 00:12: iomem range 0x100000-0xdf6fffff could not be reserved [ 0.259049] AppArmor: AppArmor Filesystem Enabled [ 0.259088] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.259090] pci 0000:00:1c.0: IO window: disabled [ 0.259095] pci 0000:00:1c.0: MEM window: disabled [ 0.259098] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.259102] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:01 [ 0.259106] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.259110] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff [ 0.259114] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.259118] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.259120] pci 0000:00:1e.0: IO window: disabled [ 0.259124] pci 0000:00:1e.0: MEM window: disabled [ 0.259128] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.259142] alloc irq_desc for 16 on node -1 [ 0.259143] alloc kstat_irqs on node -1 [ 0.259150] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.259154] pci 0000:00:1c.0: setting latency timer to 64 [ 0.259161] alloc irq_desc for 17 on node -1 [ 0.259162] alloc kstat_irqs on node -1 [ 0.259166] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.259169] pci 0000:00:1c.1: setting latency timer to 64 [ 0.259175] pci 0000:00:1e.0: setting latency timer to 64 [ 0.259180] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.259182] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.259185] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.259187] pci_bus 0000:01: resource 1 mem: [0xfeb00000-0xfebfffff] [ 0.259189] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.259191] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.259228] NET: Registered protocol family 2 [ 0.259322] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.259612] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.260116] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.260384] TCP: Hash tables configured (established 131072 bind 65536) [ 0.260388] TCP reno registered [ 0.260499] NET: Registered protocol family 1 [ 0.260567] Trying to unpack rootfs image as initramfs... [ 0.432197] Freeing initrd memory: 7460k freed [ 0.435904] cpufreq-nforce2: No nForce2 chipset. [ 0.435931] Scanning for low memory corruption every 60 seconds [ 0.436027] audit: initializing netlink socket (disabled) [ 0.436043] type=2000 audit(1258034792.432:1): initialized [ 0.443796] highmem bounce pool size: 64 pages [ 0.443801] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.445161] VFS: Disk quotas dquot_6.5.2 [ 0.445224] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.445749] fuse init (API version 7.12) [ 0.445833] msgmni has been set to 1666 [ 0.446047] alg: No test for stdrng (krng) [ 0.446062] io scheduler noop registered [ 0.446064] io scheduler anticipatory registered [ 0.446066] io scheduler deadline registered [ 0.446117] io scheduler cfq registered (default) [ 0.446129] pci 0000:00:02.0: Boot video device [ 0.446306] alloc irq_desc for 24 on node -1 [ 0.446308] alloc kstat_irqs on node -1 [ 0.446318] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.446326] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.446441] alloc irq_desc for 25 on node -1 [ 0.446443] alloc kstat_irqs on node -1 [ 0.446450] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.446458] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.446539] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.446613] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.446744] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.446748] ACPI: Power Button [PWRF] [ 0.446803] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.446806] ACPI: Power Button [PWRB] [ 0.447350] ACPI: SSDT df6a00f0 00214 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 0.447651] processor LNXCPU:00: registered as cooling_device0 [ 0.447930] ACPI: SSDT df6a0310 00143 (v01 AMI CPU2PM 00000001 INTL 20060113) [ 0.448235] processor LNXCPU:01: registered as cooling_device1 [ 0.450519] isapnp: Scanning for PnP cards... [ 0.501314] Switched to high resolution mode on CPU 1 [ 0.504062] Switched to high resolution mode on CPU 0 [ 0.803521] isapnp: No Plug & Play device found [ 0.804625] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.804726] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.805214] 00:10: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.806169] brd: module loaded [ 0.806599] loop: module loaded [ 0.806680] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.806782] ata_piix 0000:00:1f.1: version 2.13 [ 0.806797] alloc irq_desc for 18 on node -1 [ 0.806800] alloc kstat_irqs on node -1 [ 0.806807] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.806845] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.806925] scsi0 : ata_piix [ 0.807027] scsi1 : ata_piix [ 0.808143] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.808147] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.808176] alloc irq_desc for 19 on node -1 [ 0.808178] alloc kstat_irqs on node -1 [ 0.808185] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.808193] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.808233] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.808304] scsi2 : ata_piix [ 0.808370] scsi3 : ata_piix [ 0.809654] ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 [ 0.809657] ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 [ 0.810435] Fixed MDIO Bus: probed [ 0.810467] PPP generic driver version 2.4.2 [ 0.810578] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.810602] alloc irq_desc for 23 on node -1 [ 0.810604] alloc kstat_irqs on node -1 [ 0.810611] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.810627] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.810630] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.810684] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.814600] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.814606] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.814622] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfea77c00 [ 0.828034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.828171] usb usb1: configuration #1 chosen from 1 choice [ 0.828217] hub 1-0:1.0: USB hub found [ 0.828226] hub 1-0:1.0: 8 ports detected [ 0.828301] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.828322] uhci_hcd: USB Universal Host Controller Interface driver [ 0.828359] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.828366] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.828369] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.828409] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.828434] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400 [ 0.828520] usb usb2: configuration #1 chosen from 1 choice [ 0.828546] hub 2-0:1.0: USB hub found [ 0.828552] hub 2-0:1.0: 2 ports detected [ 0.828600] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.828606] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.828610] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.828644] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.828668] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480 [ 0.828747] usb usb3: configuration #1 chosen from 1 choice [ 0.828773] hub 3-0:1.0: USB hub found [ 0.828779] hub 3-0:1.0: 2 ports detected [ 0.828827] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.828833] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.828837] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.828872] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.828903] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800 [ 0.828984] usb usb4: configuration #1 chosen from 1 choice [ 0.829010] hub 4-0:1.0: USB hub found [ 0.829016] hub 4-0:1.0: 2 ports detected [ 0.829068] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.829074] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.829077] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.829111] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.829142] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880 [ 0.829226] usb usb5: configuration #1 chosen from 1 choice [ 0.829251] hub 5-0:1.0: USB hub found [ 0.829257] hub 5-0:1.0: 2 ports detected [ 0.829364] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 0.832064] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.832071] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.832136] mice: PS/2 mouse device common for all mice [ 0.832228] rtc_cmos 00:03: RTC can wake from S4 [ 0.832265] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.832289] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.832392] device-mapper: uevent: version 1.0.3 [ 0.832498] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.832575] device-mapper: multipath: version 1.1.0 loaded [ 0.832578] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.832707] EISA: Probing bus 0 at eisa.0 [ 0.832733] EISA: Detected 0 cards. [ 0.832815] cpuidle: using governor ladder [ 0.832817] cpuidle: using governor menu [ 0.833303] TCP cubic registered [ 0.833453] NET: Registered protocol family 10 [ 0.833892] lo: Disabled Privacy Extensions [ 0.834206] NET: Registered protocol family 17 [ 0.834229] Bluetooth: L2CAP ver 2.13 [ 0.834230] Bluetooth: L2CAP socket layer initialized [ 0.834233] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.834234] Bluetooth: SCO socket layer initialized [ 0.834277] Bluetooth: RFCOMM TTY layer initialized [ 0.834281] Bluetooth: RFCOMM socket layer initialized [ 0.834283] Bluetooth: RFCOMM ver 1.11 [ 0.834690] Using IPI No-Shortcut mode [ 0.834760] PM: Resume from disk failed. [ 0.834774] registered taskstats version 1 [ 0.834876] Magic number: 1:481:131 [ 0.834915] acpi device:06: hash matches [ 0.834918] acpi PNP0C02:03: hash matches [ 0.834948] rtc_cmos 00:03: setting system clock to 2009-11-12 14:06:33 UTC (1258034793) [ 0.834951] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.834953] EDD information not available. [ 1.019706] ata3.00: ATA-8: ST3320613AS, SD22, max UDMA/133 [ 1.019712] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.019772] ata3.01: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 [ 1.075669] ata3.00: configured for UDMA/133 [ 1.088241] ata3.01: configured for UDMA/100 [ 1.088729] scsi 2:0:0:0: Direct-Access ATA ST3320613AS SD22 PQ: 0 ANSI: 5 [ 1.088864] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.088878] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.088976] sd 2:0:0:0: [sda] Write Protect is off [ 1.088979] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.089475] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.090125] scsi 2:0:1:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 [ 1.091874] sda: sda1 sda2 < sda5 sda6sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.140242] Uniform CD-ROM driver Revision: 3.20 [ 1.140338] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 1.140388] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 1.165414] sda7 sda8 > [ 1.186508] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.186525] Freeing unused kernel memory: 540k freed [ 1.186803] Write protecting the kernel text: 4568k [ 1.186845] Write protecting the kernel read-only data: 1836k [ 1.196541] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 1.300509] Linux agpgart interface v0.103 [ 1.302980] agpgart-intel 0000:00:00.0: Intel G33 Chipset [ 1.303186] agpgart-intel 0000:00:00.0: detected 7164K stolen memory [ 1.305923] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 [ 1.354685] usb 1-4: configuration #1 chosen from 1 choice [ 1.379749] [drm] Initialized drm 1.1.0 20060810 [ 1.423747] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.423753] i915 0000:00:02.0: setting latency timer to 64 [ 1.425195] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining [ 1.425198] [drm] MTRR allocation failed. Graphics performance may suffer. [ 1.426030] ATL1E 0000:01:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.426041] ATL1E 0000:01:00.0: setting latency timer to 64 [ 1.427492] Floppy drive(s): fd0 is 1.44M [ 1.428389] alloc irq_desc for 26 on node -1 [ 1.428392] alloc kstat_irqs on node -1 [ 1.428402] i915 0000:00:02.0: irq 26 for MSI/MSI-X [ 1.428850] intel drm CRTDDC_A: Test OK [ 1.439276] Initializing USB Mass Storage driver... [ 1.439470] scsi4 : SCSI emulation for USB Mass Storage devices [ 1.439574] usb-storage: device found at 3 [ 1.439576] usb-storage: waiting for device to settle before scanning [ 1.439592] usbcore: registered new interface driver usb-storage [ 1.439595] USB Mass Storage support registered. [ 1.443686] FDC 0 is a post-1991 82077 [ 1.472018] usb 1-6: new high speed USB device using ehci_hcd and address 4 [ 1.560280] [drm] fb0: inteldrmfb frame buffer device [ 1.560354] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.626843] [drm] DAC-6: set mode 1920x1080 14 [ 1.654269] Console: switching to colour frame buffer device 240x67 [ 1.790227] usb 1-6: configuration #1 chosen from 1 choice [ 2.040213] PM: Starting manual resume from disk [ 2.040217] PM: Resume from partition 8:7 [ 2.040219] PM: Checking hibernation image. [ 2.040587] PM: Resume from disk failed. [ 2.044061] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 2.059410] EXT4-fs (sda6): barriers enabled [ 2.072393] kjournald2 starting: pid 413, dev sda6:8, commit interval 5 seconds [ 2.072422] EXT4-fs (sda6): delayed allocation enabled [ 2.072428] EXT4-fs: file extents enabled [ 2.075205] EXT4-fs: mballoc enabled [ 2.075220] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 2.223682] usb 2-1: configuration #1 chosen from 1 choice [ 2.248716] usbcore: registered new interface driver hiddev [ 2.251759] usbcore: registered new interface driver usbhid [ 2.251762] usbhid: v2.6:USB HID core driver [ 2.268906] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3 [ 2.268972] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.0-1/input0 [ 2.296589] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor [ 2.297464] input: MLK MTS2118 Wireless Desktop as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input4 [ 2.297599] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK MTS2118 Wireless Desktop] on usb-0000:00:1d.0-1/input1 [ 2.441819] type=1505 audit(1258034795.105:2): operation="profile_load" pid=444 name=/usr/share/gdm/guest-session/Xsession [ 2.445406] type=1505 audit(1258034795.109:3): operation="profile_load" pid=445 name=/sbin/dhclient3 [ 2.446078] type=1505 audit(1258034795.109:4): operation="profile_load" pid=445 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 2.446438] type=1505 audit(1258034795.109:5): operation="profile_load" pid=445 name=/usr/lib/connman/scripts/dhclient-script [ 2.476865] type=1505 audit(1258034795.141:6): operation="profile_load" pid=446 name=/usr/bin/evince [ 2.487403] type=1505 audit(1258034795.149:7): operation="profile_load" pid=446 name=/usr/bin/evince-previewer [ 2.493607] type=1505 audit(1258034795.157:8): operation="profile_load" pid=446 name=/usr/bin/evince-thumbnailer [ 2.529801] type=1505 audit(1258034795.193:9): operation="profile_load" pid=448 name=/usr/lib/cups/backend/cups-pdf [ 2.530588] type=1505 audit(1258034795.193:10): operation="profile_load" pid=448 name=/usr/sbin/cupsd [ 3.226504] Adding 4000144k swap on /dev/sda7. Priority:-1 extents:1 across:4000144k [ 3.488575] EXT4-fs (sda6): internal journal on sda6:8 [ 3.713037] EXT4-fs (sda8): barriers enabled [ 3.714865] kjournald2 starting: pid 502, dev sda8:8, commit interval 5 seconds [ 3.715395] EXT4-fs (sda8): internal journal on sda8:8 [ 3.715402] EXT4-fs (sda8): delayed allocation enabled [ 3.715407] EXT4-fs: file extents enabled [ 3.716978] EXT4-fs: mballoc enabled [ 3.716994] EXT4-fs (sda8): mounted filesystem with ordered data mode [ 5.853381] udev: starting version 147 [ 6.436186] usb-storage: device scan complete [ 6.439690] scsi 4:0:0:0: Direct-Access WDC WD10 EVDS-63N5B1 PQ: 0 ANSI: 2 [ 6.440212] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 6.443944] sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 6.446280] sd 4:0:0:0: [sdb] Write Protect is off [ 6.446286] sd 4:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 6.446290] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 6.449529] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 6.449536] sdb: [ 7.602631] alloc irq_desc for 27 on node -1 [ 7.602636] alloc kstat_irqs on node -1 [ 7.602653] ATL1E 0000:01:00.0: irq 27 for MSI/MSI-X [ 7.602915] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 9.944595] cfg80211: Calling CRDA to update world regulatory domain [ 10.136707] cfg80211: World regulatory domain updated: [ 10.136711] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.136714] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.136717] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.136719] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 10.136721] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.136724] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 10.506325] intel_rng: FWH not detected [ 12.865451] sdb1 sdb2 < sdb5 sdb6 > [ 12.907804] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 12.907854] sd 4:0:0:0: [sdb] Attached SCSI disk [ 12.943507] ip_tables: (C) 2000-2006 Netfilter Core Team [ 14.104020] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.104058] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 14.121567] lp: driver loaded but no devices found [ 14.178879] Linux video capture interface: v2.00 [ 14.244272] phy0: Selected rate control algorithm 'minstrel' [ 14.245058] Registered led device: rt2500usb-phy0::radio [ 14.245077] Registered led device: rt2500usb-phy0::quality [ 14.245526] usbcore: registered new interface driver rt2500usb [ 14.719852] parport_pc 00:07: reported by Plug and Play ACPI [ 14.719960] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] [ 14.736386] ppdev: user-space parallel port driver [ 14.736528] bttv: driver version 0.9.18 loaded [ 14.736532] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 14.816806] lp0: using parport0 (interrupt-driven). [ 15.352195] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.416847] CPU0 attaching NULL sched-domain. [ 19.416854] CPU1 attaching NULL sched-domain. [ 19.436109] CPU0 attaching sched-domain: [ 19.436116] domain 0: span 0-1 level MC [ 19.436121] groups: 0 1 [ 19.436128] domain 1: span 0-1 level CPU [ 19.436132] groups: 0-1 (__cpu_power = 2048) [ 19.436141] CPU1 attaching sched-domain: [ 19.436145] domain 0: span 0-1 level MC [ 19.436149] groups: 1 0 [ 19.436155] domain 1: span 0-1 level CPU [ 19.436159] groups: 0-1 (__cpu_power = 2048) [ 23.259237] CPU0 attaching NULL sched-domain. [ 23.259244] CPU1 attaching NULL sched-domain. [ 23.276127] CPU0 attaching sched-domain: [ 23.276134] domain 0: span 0-1 level MC [ 23.276139] groups: 0 1 [ 23.276148] CPU1 attaching sched-domain: [ 23.276152] domain 0: span 0-1 level MC [ 23.276156] groups: 1 0 [ 24.169846] [drm] DAC-6: set mode 15 [ 79.103840] wlan0: authenticate with AP 00:25:86:d0:af:f4 [ 79.105590] wlan0: authenticated [ 79.105596] wlan0: associate with AP 00:25:86:d0:af:f4 [ 79.107952] wlan0: RX AssocResp from 00:25:86:d0:af:f4 (capab=0x431 status=0 aid=1) [ 79.107957] wlan0: associated [ 79.113989] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 79.806722] padlock: VIA PadLock not detected. [ 89.988515] wlan0: no IPv6 routers present

από **logari81** » 17 Νοέμ 2009, 00:30

από το αποτελεσμα της εντολής lspci -nn σιγουρα δεν σου ξεφυγε καμια γραμμη; Δεν φαινεται πουθενα η καρτα τηλεόρασης. Ειναι σιγουρα pci;

από **petsam** » 17 Νοέμ 2009, 03:20

Πράγματι δεν δείχνει. Φυσικό ήταν αφού απ'ότι φάνηκε δεν πάταγε καλά η κάρτα!

Τελικά μου έδειξε εικόνα κανονικά και μέσα από το TVtime σκάναρε και βρήκε τα κανάλια!! :thumbup:

Δυστυχώς, όμως δεν υπάρχει ήχος. ...καθόλου, σου λέω!
Ρίχνοντας μια ματιά στα ubuntuforums βρήκα ότι έχει καταγραφεί ένα σχετικό Bug
Υποθέτω πως πρέπει να περιμένω να λυθεί με κάποιο upgrade, εκτός αν υπάρχει κάποια άλλη πρόταση. :roll:

Ευχαριστώ, και πάλι.

από **logari81** » 17 Νοέμ 2009, 12:18

Για τον ήχο υπάρχουν 2 λύσεις, η μια ειναι αν εχει εξοδο ήχου η καρτα τηλεόρασης .. να την συνδεσεις με καλώδιο στην είσοδο της κάρτας ήχου. Η άλλη λύση ειναι να κανεις το ιδιο πραγμα αλλα σε επίπεδο software.

από **petsam** » 17 Νοέμ 2009, 14:42

Η πρώτη περίπτωση ισχύει ήδη και δοκίμασα όλες τις εμφανείς δυνατότητες με τον alsamixer.
Για την software δεν ξέρω πώς, μπορείς να μου δείξεις τον τρόπο;
:?:

από **logari81** » 17 Νοέμ 2009, 14:49

για software δες αυτό:
viewtopic.php?f=16&t=7991#p81855
αλλα θα σου συνιστουσα την λύση Hardware. Εκτος απο το alsamixer ίσως χρειαστεί να πειράξεις και το sound preferences.

από **petsam** » 17 Νοέμ 2009, 15:54

Κώδικας: Επιλογή όλων: petros@petros-desktop:~$ sox --channels 2 -s --rate 48000 --type ossdsp /dev/dsp1 --type ossdsp /dev/dsp /dev/dsp1: (ossdsp) Encoding: Signed PCM Channels: 2 @ 16-bit Samplerate: 48000Hz Replaygain: off Duration: unknown In:0.00% 00:00:00.02 [00:00:00.00] Out:0 [ | ] Clip:0 sox FAIL sox: `/dev/dsp1' lsx_readbuf: Input/output error In:0.00% 00:00:00.02 [00:00:00.00] Out:1.02k [ | ] Clip:0 Done.

Μου κάνει το εξής αξιοθαύμαστο:
Στο TVTime δείχνει εικόνα και μετά από λίγα δευτερόλεπτα δείχνει No signal, και εναλλάσεται συνεχώς η ίδια "φάση" χωρίς ήχο. Στον alsamixer το LineIn είναι 0 και όταν το αλλάζω μετά από λίγο ξαναγίνεται 0 όσες φορές και να το κάνω. Στις ρυθμίσεις ήχου όλα δείχνουν κανονικά.
Εικόνα

Όσο να γράψω το κείμενο είδα πως πλέον δεν εναλλάσεται το NoSignal αλλά ακόμη δεν έχει ήχο.

από **fygas** » 17 Νοέμ 2009, 16:03

Γεια σου φίλε μου,

δώσε σε παρακαλώ εδώ τα αποτελέσματα των εντολών:

Κώδικας: Επιλογή όλων: lsusb

Κώδικας: Επιλογή όλων: dmesg

Κώδικας: Επιλογή όλων: ls /dev/dsp*

Λειτουργικό: Ubuntu 10.04 lucid 64-bit	Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]	Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)

Λειτουργικό: Ubuntu 10.04 lucid 64-bit	Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]	Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)

Λειτουργικό: Ubuntu 10.04 lucid 64-bit	Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]	Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)

Λειτουργικό: Ubuntu 10.04 lucid 64-bit	Προδιαγραφές: 4x Intel Core i5 CPU M 450 2.40GHz ‖ RAM 3696 MiB ‖ Lenovo KL3 - LENOVO IdeaPad Y560
Κάρτα γραφικών: ATI Device [1002:68c0]	Ασύρματο: wlan0: Atheros Inc. AR928X Wireless Network Adapter (PCI-Express) [168c:002a] (rev 01)

Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Re: Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Re: Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Re: Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Re: Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Re: Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Re: Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Re: Εγκατάσταση PCTV Rave PCI στο Ubuntu 9.10

Re: Pinnacle PCTV Hybirid Pro Stick 330e

Re: Pinnacle PCTV Hybirid Pro Stick 330e