Driver για Gigabyte U8000 - Hybrid TV Dongle (USB 2.0)??

[YianPan]

[/quote]Και τώρα στην προσθαφαίρεση προγραμμάτων έχει tvtime δοκίμασε το[/quote]

Το δοκιμασα αλλα τιποτα...

αλλη προταση?

[logari81]

δωσε μας λιγο το αποτελεσμα των εντολων

Κώδικας: Επιλογή όλων

lsmod |grep dvb
dmesg

[YianPan]

δωσε μας λιγο το αποτελεσμα των εντολων

Κώδικας: Επιλογή όλων

lsmod |grep dvb
dmesg

Κώδικας: Επιλογή όλων

lsmod...:
dvb_usb_dib0700 36488 0
dib7000p 17800 2 dvb_usb_dib0700
dib7000m 15364 1 dvb_usb_dib0700
dvb_usb 22924 1 dvb_usb_dib0700
dvb_core 89980 1 dvb_usb
dib3000mc 14088 1 dvb_usb_dib0700
dib0070 9092 1 dvb_usb_dib0700
i2c_core 24832 8 tuner_xc2028,dvb_usb_dib0700,dib7000p,dib7000m,dvb_usb,dib3000mc,dibx000_common,dib0070
usbcore 146412 12 snd_usb_audio,snd_usb_lib,dvb_usb_dib0700,dvb_usb,gspca_zc3xx,gspca_main,usb_storage,libusual,usbhid,ehci_hcd,uhci_hcd

Κώδικας: Επιλογή όλων

dmesg...:
[ 20.648817] hub 2-2:1.0: 4 ports detected
[ 20.766117] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 20.766124] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[ 20.766134] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 20.766493] scsi0 : ahci
[ 20.766650] scsi1 : ahci
[ 20.766797] scsi2 : ahci
[ 20.767370] scsi3 : ahci
[ 20.767443] ata1: SATA max UDMA/133 abar m1024@0xf0585000 port 0xf0585100 irq 221
[ 20.767447] ata2: SATA max UDMA/133 abar m1024@0xf0585000 port 0xf0585180 irq 221
[ 20.767451] ata3: SATA max UDMA/133 abar m1024@0xf0585000 port 0xf0585200 irq 221
[ 20.767455] ata4: SATA max UDMA/133 abar m1024@0xf0585000 port 0xf0585280 irq 221
[ 20.954168] usb 2-2.2: new low speed USB device using ehci_hcd and address 4
[ 21.050482] usb 2-2.2: configuration #1 chosen from 1 choice
[ 21.249884] usb 2-2.3: new full speed USB device using ehci_hcd and address 5
[ 21.343094] usb 2-2.3: configuration #1 chosen from 1 choice
[ 21.405456] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 21.407635] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 21.407638] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
[ 21.407709] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 21.407774] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[ 21.408160] ata1.00: ATA-8: WDC WD1200BEVS-60UST0, 01.01A01, max UDMA/100
[ 21.408163] ata1.00: 234441648 sectors, multi 16: LBA48
[ 21.410291] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 21.410295] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 filtered out
[ 21.410374] ata1.00: ACPI cmd c6/00:10:00:00:00:a0 succeeded
[ 21.410451] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
[ 21.410873] ata1.00: configured for UDMA/100
[ 21.411874] ata1.00: configured for UDMA/100
[ 21.411881] ata1: EH complete
[ 21.541596] usb 2-2.4: new high speed USB device using ehci_hcd and address 6
[ 21.654054] usb 2-2.4: configuration #1 chosen from 1 choice
[ 21.733128] ata2: SATA link down (SStatus 0 SControl 0)
[ 22.052809] ata3: SATA link down (SStatus 0 SControl 0)
[ 22.372491] ata4: SATA link down (SStatus 0 SControl 0)
[ 22.372759] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-6 01.0 PQ: 0 ANSI: 5
[ 22.373147] ata_piix 0000:00:1f.1: version 2.12
[ 22.373166] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.373205] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 22.373272] scsi4 : ata_piix
[ 22.373467] scsi5 : ata_piix
[ 22.373952] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x3040 irq 14
[ 22.373956] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x3048 irq 15
[ 22.381767] Driver 'sd' needs updating - please use bus_type methods
[ 22.392536] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 22.392562] sd 0:0:0:0: [sda] Write Protect is off
[ 22.392567] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.392602] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.392693] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 22.392714] sd 0:0:0:0: [sda] Write Protect is off
[ 22.392729] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 22.392746] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 22.392750] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 22.482603] sd 0:0:0:0: [sda] Attached SCSI disk
[ 22.487418] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.696682] ata5.00: ATAPI: Optiarc DVD RW AD-7530B, NH02, max MWDMA2
[ 22.864445] ata5.00: configured for MWDMA2
[ 22.864510] ata6: port disabled. ignoring.
[ 22.865948] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7530B NH02 PQ: 0 ANSI: 5
[ 22.866103] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 22.911926] Driver 'sr' needs updating - please use bus_type methods
[ 22.916805] usbcore: registered new interface driver hiddev
[ 22.918712] input: Microsoft Compact Optical Mouse 500 as /devices/pci0000:00/0000:00:1d.7/usb2/2-2/2-2.2/2-2.2:1.0/input/input2
[ 22.925807] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 22.925811] Uniform CD-ROM driver Revision: 3.20
[ 22.925864] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 22.932012] input,hidraw0: USB HID v1.11 Mouse [Microsoft Compact Optical Mouse 500] on usb-0000:00:1d.7-2.2
[ 22.932035] usbcore: registered new interface driver usbhid
[ 22.932039] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 22.937303] usbcore: registered new interface driver libusual
[ 22.946606] Initializing USB Mass Storage driver...
[ 22.948116] scsi6 : SCSI emulation for USB Mass Storage devices
[ 22.948793] usbcore: registered new interface driver usb-storage
[ 22.948797] USB Mass Storage support registered.
[ 22.948884] usb-storage: device found at 6
[ 22.948886] usb-storage: waiting for device to settle before scanning
[ 23.061987] Attempting manual resume
[ 23.061990] swsusp: Resume From Partition 8:6
[ 23.061992] PM: Checking swsusp image.
[ 23.062160] PM: Resume from disk failed.
[ 23.076354] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 23.076357] EXT3-fs: write access will be enabled during recovery.
[ 25.111132] kjournald starting. Commit interval 5 seconds
[ 25.111158] EXT3-fs: sda5: orphan cleanup on readonly fs
[ 25.128368] ext3_orphan_cleanup: deleting unreferenced inode 2564101
[ 25.174432] ext3_orphan_cleanup: deleting unreferenced inode 82064
[ 25.195479] ext3_orphan_cleanup: deleting unreferenced inode 1269776
[ 25.205899] ext3_orphan_cleanup: deleting unreferenced inode 1237000
[ 25.205926] ext3_orphan_cleanup: deleting unreferenced inode 1236999
[ 25.205933] ext3_orphan_cleanup: deleting unreferenced inode 1236997
[ 25.205940] ext3_orphan_cleanup: deleting unreferenced inode 1236995
[ 25.205947] ext3_orphan_cleanup: deleting unreferenced inode 1236994
[ 25.205953] EXT3-fs: sda5: 8 orphan inodes deleted
[ 25.205955] EXT3-fs: recovery complete.
[ 25.217899] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.945484] usb-storage: device scan complete
[ 27.946879] scsi 6:0:0:0: Direct-Access Seagate FreeAgentDesktop 100D PQ: 0 ANSI: 4
[ 27.949456] sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 27.950952] sd 6:0:0:0: [sdb] Write Protect is off
[ 27.950957] sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
[ 27.950962] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 27.953076] sd 6:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB)
[ 27.954572] sd 6:0:0:0: [sdb] Write Protect is off
[ 27.954577] sd 6:0:0:0: [sdb] Mode Sense: 1c 00 00 00
[ 27.954581] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 27.954587] sdb: sdb1
[ 27.965579] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 27.965618] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 32.632087] Linux agpgart interface v0.102
[ 32.723290] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.738405] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.791219] agpgart: Detected an Intel 945GME Chipset.
[ 32.792342] agpgart: Detected 7932K stolen memory.
[ 32.809851] agpgart: AGP aperture is 256M @ 0xe0000000
[ 32.891007] intel_rng: FWH not detected
[ 32.909933] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 32.994903] input: Power Button (FF) as /devices/virtual/input/input4
[ 33.022854] ACPI: Power Button (FF) [PWRF]
[ 33.022971] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 33.054822] ACPI: Sleep Button (CM) [C20B]
[ 33.054911] input: Lid Switch as /devices/virtual/input/input6
[ 33.055007] ACPI: Lid Switch [C20C]
[ 33.055389] ACPI: AC Adapter [C1AB] (on-line)
[ 33.070889] iTCO_vendor_support: vendor-support=0
[ 33.092528] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 33.092623] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 33.092664] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 33.570182] ACPI: Battery Slot [C1AC] (battery present)
[ 33.634260] ACPI: WMI-Acer: Mapper loaded
[ 33.722244] Yenta: CardBus bridge found at 0000:02:06.0 [103c:30d5]
[ 33.722274] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 33.722276] Yenta: Routing CardBus interrupts to PCI
[ 33.722282] Yenta TI: socket 0000:02:06.0, mfunc 0x01be1b32, devctl 0x44
[ 33.892732] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 33.926242] ACPI: Video Device [C085] (multi-head: yes rom: no post: no)
[ 33.954765] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[ 33.954770] Socket status: 30000006
[ 33.954772] Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 33.954778] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 33.954781] cs: IO port probe 0x2000-0x2fff: clean.
[ 33.955045] pcmcia: parent PCI bridge Memory window: 0xf0100000 - 0xf03fffff
[ 34.048788] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
[ 34.088300] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
[ 34.349562] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 34.349567] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 34.349685] ACPI: PCI Interrupt 0000:10:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 34.349702] PCI: Setting latency timer of device 0000:10:00.0 to 64
[ 34.349721] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 34.681288] Linux video capture interface: v2.00
[ 34.798042] gspca: main v2.3.0 registered
[ 34.821885] gspca: probing 046d:08d7
[ 34.872675] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 34.872706] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 34.925798] dib0700: loaded with support for 8 different device-types
[ 34.925989] dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware
[ 35.718586] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 35.859816] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 35.860303] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 35.955823] cs: IO port probe 0x100-0x3af: clean.
[ 35.957945] cs: IO port probe 0x3e0-0x4ff: clean.
[ 35.958828] cs: IO port probe 0x820-0x8ff: clean.
[ 35.959578] cs: IO port probe 0xc00-0xcf7: clean.
[ 35.960570] cs: IO port probe 0xa00-0xaff: clean.
[ 35.971621] dib0700: firmware started successfully.
[ 36.322924] zc3xx: probe 2wr ov vga 0x0000
[ 36.354889] zc3xx: probe sensor -> 11
[ 36.354893] zc3xx: Find Sensor HV7131R(c)
[ 36.355605] gspca: probe ok
[ 36.355626] gspca: probing 046d:08d7
[ 36.355645] gspca: probing 046d:08d7
[ 36.355677] usbcore: registered new interface driver zc3xx
[ 36.355684] zc3xx: registered
[ 36.449612] gspca: disagrees about version of symbol video_devdata
[ 36.449617] gspca: Unknown symbol video_devdata
[ 36.449883] gspca: disagrees about version of symbol video_unregister_device
[ 36.449885] gspca: Unknown symbol video_unregister_device
[ 36.449983] gspca: disagrees about version of symbol video_device_alloc
[ 36.449985] gspca: Unknown symbol video_device_alloc
[ 36.450022] gspca: disagrees about version of symbol video_register_device
[ 36.450024] gspca: Unknown symbol video_register_device
[ 36.450202] gspca: disagrees about version of symbol video_usercopy
[ 36.450204] gspca: Unknown symbol video_usercopy
[ 36.450240] gspca: disagrees about version of symbol video_device_release
[ 36.450242] gspca: Unknown symbol video_device_release
[ 36.465260] gspca: disagrees about version of symbol video_devdata
[ 36.465264] gspca: Unknown symbol video_devdata
[ 36.465528] gspca: disagrees about version of symbol video_unregister_device
[ 36.465530] gspca: Unknown symbol video_unregister_device
[ 36.465627] gspca: disagrees about version of symbol video_device_alloc
[ 36.465629] gspca: Unknown symbol video_device_alloc
[ 36.465666] gspca: disagrees about version of symbol video_register_device
[ 36.465668] gspca: Unknown symbol video_register_device
[ 36.465844] gspca: disagrees about version of symbol video_usercopy
[ 36.465846] gspca: Unknown symbol video_usercopy
[ 36.465883] gspca: disagrees about version of symbol video_device_release
[ 36.465885] gspca: Unknown symbol video_device_release
[ 36.468004] gspca: disagrees about version of symbol video_devdata
[ 36.468009] gspca: Unknown symbol video_devdata
[ 36.468289] gspca: disagrees about version of symbol video_unregister_device
[ 36.468291] gspca: Unknown symbol video_unregister_device
[ 36.468398] gspca: disagrees about version of symbol video_device_alloc
[ 36.468401] gspca: Unknown symbol video_device_alloc
[ 36.468438] gspca: disagrees about version of symbol video_register_device
[ 36.468440] gspca: Unknown symbol video_register_device
[ 36.468623] gspca: disagrees about version of symbol video_usercopy
[ 36.468625] gspca: Unknown symbol video_usercopy
[ 36.468662] gspca: disagrees about version of symbol video_device_release
[ 36.468664] gspca: Unknown symbol video_device_release
[ 36.478411] dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
[ 36.478466] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 36.478606] DVB: registering new adapter (Gigabyte U8000-RH)
[ 36.721548] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 36.789682] xc2028 1-0061: creating new instance
[ 36.789687] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 36.789774] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/input/input9
[ 36.823094] dvb-usb: schedule remote query interval to 150 msecs.
[ 36.823100] dvb-usb: Gigabyte U8000-RH successfully initialized and connected.
[ 36.823238] usbcore: registered new interface driver dvb_usb_dib0700
[ 36.826376] usbcore: registered new interface driver snd-usb-audio
[ 37.071927] lp: driver loaded but no devices found
[ 37.153610] Adding 2241028k swap on /dev/sda6. Priority:-1 extents:1 across:2241028k
[ 37.691392] EXT3 FS on sda5, internal journal
[ 39.113802] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 39.453167] PPP generic driver version 2.4.2
[ 39.491626] NET: Registered protocol family 17
[ 39.537598] NET: Registered protocol family 10
[ 39.537887] lo: Disabled Privacy Extensions
[ 40.253563] No dock devices found.
[ 43.337236] apm: BIOS not found.
[ 43.601690] ppdev: user-space parallel port driver
[ 43.815664] audit(1226089765.932:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5608 profile="/usr/sbin/cupsd" namespace="default"
[ 45.885561] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 45.885571] vboxdrv: Successfully done.
[ 45.885575] vboxdrv: Found 2 processor cores.
[ 45.885664] vboxdrv: fAsync=0 offMin=0x594 offMax=0x1470
[ 45.885674] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 45.885678] vboxdrv: Successfully loaded version 2.0.4 (interface 0x00090000).
[ 46.231499] tun: Universal TUN/TAP device driver, 1.6
[ 46.231508] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 48.267712] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[ 48.269123] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 48.273511] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 48.297880] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 51.456900] Bluetooth: Core ver 2.11
[ 51.457270] NET: Registered protocol family 31
[ 51.457277] Bluetooth: HCI device and connection manager initialized
[ 51.457285] Bluetooth: HCI socket layer initialized
[ 51.531862] Bluetooth: L2CAP ver 2.9
[ 51.531867] Bluetooth: L2CAP socket layer initialized
[ 51.539339] Bluetooth: RFCOMM socket layer initialized
[ 51.539354] Bluetooth: RFCOMM TTY layer initialized
[ 51.539355] Bluetooth: RFCOMM ver 1.8
[ 54.996590] [drm] Initialized drm 1.1.0 20060810
[ 54.999140] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 54.999150] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 54.999216] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 56.395470] vbox0: no IPv6 routers present
[ 67.279571] eth0: no IPv6 routers present
[ 77.363289] CPU0 attaching NULL sched-domain.
[ 77.363300] CPU1 attaching NULL sched-domain.
[ 77.381462] CPU0 attaching sched-domain:
[ 77.381471] domain 0: span 03
[ 77.381475] groups: 01 02
[ 77.381484] CPU1 attaching sched-domain:
[ 77.381487] domain 0: span 03
[ 77.381491] groups: 02 01
[ 377.100988] xc2028 1-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7
[ 377.126673] xc2028 1-0061: Loading firmware for type=BASE F8MHZ (3), id 0000000000000000.
[ 383.228424] xc2028 1-0061: Loading firmware for type=D2620 DTV8 (208), id 0000000000000000.
[ 383.337187] xc2028 1-0061: Loading SCODE for type=DTV7 DTV78 DTV8 DIBCOM52 CHINA SCODE HAS_IF_5400 (65000380), id 0000000000000000.
[ 454.120490] zc3xx: probe 2wr ov vga 0x0000
[ 454.283899] gspca: usb_submit_urb [0] err -28
[ 455.782795] zc3xx: probe 2wr ov vga 0x0000
[ 457.517039] zc3xx: probe 2wr ov vga 0x0000
[ 457.680435] gspca: usb_submit_urb [0] err -28
[ 459.179469] zc3xx: probe 2wr ov vga 0x0000
[ 461.169473] zc3xx: probe 2wr ov vga 0x0000
[ 461.332619] gspca: usb_submit_urb [0] err -28
[ 462.831903] zc3xx: probe 2wr ov vga 0x0000
[ 464.821901] zc3xx: probe 2wr ov vga 0x0000
[ 464.989052] gspca: usb_submit_urb [0] err -28
[ 466.492082] zc3xx: probe 2wr ov vga 0x0000
[ 468.482079] zc3xx: probe 2wr ov vga 0x0000
[ 468.645356] gspca: usb_submit_urb [0] err -28
[ 470.144391] zc3xx: probe 2wr ov vga 0x0000
[ 472.134385] zc3xx: probe 2wr ov vga 0x0000
[ 472.297790] gspca: usb_submit_urb [0] err -28
[ 473.796823] zc3xx: probe 2wr ov vga 0x0000
[ 475.786820] zc3xx: probe 2wr ov vga 0x0000
[ 475.950232] gspca: usb_submit_urb [0] err -28
[ 477.449252] zc3xx: probe 2wr ov vga 0x0000
[ 479.439254] zc3xx: probe 2wr ov vga 0x0000
[ 479.602658] gspca: usb_submit_urb [0] err -28
[ 481.101564] zc3xx: probe 2wr ov vga 0x0000
[ 483.095437] zc3xx: probe 2wr ov vga 0x0000
[ 483.258709] gspca: usb_submit_urb [0] err -28
[ 484.757743] zc3xx: probe 2wr ov vga 0x0000
[ 486.747743] zc3xx: probe 2wr ov vga 0x0000
[ 486.911145] gspca: usb_submit_urb [0] err -28
[ 488.414175] zc3xx: probe 2wr ov vga 0x0000
[ 490.404172] zc3xx: probe 2wr ov vga 0x0000
[ 490.572574] gspca: usb_submit_urb [0] err -28
[ 492.074477] zc3xx: probe 2wr ov vga 0x0000
[ 494.064472] zc3xx: probe 2wr ov vga 0x0000
[ 494.228871] gspca: usb_submit_urb [0] err -28
[ 495.726909] zc3xx: probe 2wr ov vga 0x0000
[ 497.716906] zc3xx: probe 2wr ov vga 0x0000
[ 497.880057] gspca: usb_submit_urb [0] err -28
[ 499.379090] zc3xx: probe 2wr ov vga 0x0000
[ 501.369093] zc3xx: probe 2wr ov vga 0x0000
[ 501.532493] gspca: usb_submit_urb [0] err -28
[ 503.031525] zc3xx: probe 2wr ov vga 0x0000
[ 505.021525] zc3xx: probe 2wr ov vga 0x0000
[ 505.184935] gspca: usb_submit_urb [0] err -28
[ 506.683832] zc3xx: probe 2wr ov vga 0x0000
[ 508.673833] zc3xx: probe 2wr ov vga 0x0000
[ 508.837232] gspca: usb_submit_urb [0] err -28
[ 510.336268] zc3xx: probe 2wr ov vga 0x0000
[ 512.326266] zc3xx: probe 2wr ov vga 0x0000
[ 512.489669] gspca: usb_submit_urb [0] err -28
[ 513.988575] zc3xx: probe 2wr ov vga 0x0000
[ 515.978700] zc3xx: probe 2wr ov vga 0x0000
[ 516.141725] gspca: usb_submit_urb [0] err -28
[ 517.644881] zc3xx: probe 2wr ov vga 0x0000
[ 519.634880] zc3xx: probe 2wr ov vga 0x0000
[ 519.798288] gspca: usb_submit_urb [0] err -28
[ 521.297188] zc3xx: probe 2wr ov vga 0x0000
[ 523.291185] zc3xx: probe 2wr ov vga 0x0000
[ 523.454584] gspca: usb_submit_urb [0] err -28
[ 524.953493] zc3xx: probe 2wr ov vga 0x0000
[ 526.943617] zc3xx: probe 2wr ov vga 0x0000
[ 527.107143] gspca: usb_submit_urb [0] err -28
[ 528.605927] zc3xx: probe 2wr ov vga 0x0000
[ 530.596051] zc3xx: probe 2wr ov vga 0x0000
[ 530.759075] gspca: usb_submit_urb [0] err -28
[ 532.262356] zc3xx: probe 2wr ov vga 0x0000
[ 534.260224] zc3xx: probe 2wr ov vga 0x0000
[ 534.423504] gspca: usb_submit_urb [0] err -28
[ 535.922527] zc3xx: probe 2wr ov vga 0x0000
[ 537.912531] zc3xx: probe 2wr ov vga 0x0000
[ 538.075926] gspca: usb_submit_urb [0] err -28
[ 539.574841] zc3xx: probe 2wr ov vga 0x0000
[ 541.564842] zc3xx: probe 2wr ov vga 0x0000
[ 541.728370] gspca: usb_submit_urb [0] err -28
[ 543.227275] zc3xx: probe 2wr ov vga 0x0000
[ 545.221271] zc3xx: probe 2wr ov vga 0x0000
[ 545.388544] gspca: usb_submit_urb [0] err -28
[ 546.887701] zc3xx: probe 2wr ov vga 0x0000
[ 548.625937] zc3xx: probe 2wr ov vga 0x0000
[ 548.789087] gspca: usb_submit_urb [0] err -28
[ 550.292116] zc3xx: probe 2wr ov vga 0x0000
[ 552.282116] zc3xx: probe 2wr ov vga 0x0000
[ 552.445517] gspca: usb_submit_urb [0] err -28
[ 553.944549] zc3xx: probe 2wr ov vga 0x0000
[ 555.934548] zc3xx: probe 2wr ov vga 0x0000
[ 556.097829] gspca: usb_submit_urb [0] err -28
[ 557.596856] zc3xx: probe 2wr ov vga 0x0000
[ 559.590856] zc3xx: probe 2wr ov vga 0x0000
[ 559.754264] gspca: usb_submit_urb [0] err -28
[ 561.257158] zc3xx: probe 2wr ov vga 0x0000
[ 563.251278] zc3xx: probe 2wr ov vga 0x0000
[ 563.418426] gspca: usb_submit_urb [0] err -28
[ 564.917585] zc3xx: probe 2wr ov vga 0x0000
[ 566.911456] zc3xx: probe 2wr ov vga 0x0000
[ 567.074732] gspca: usb_submit_urb [0] err -28
[ 568.577884] zc3xx: probe 2wr ov vga 0x0000
[ 570.575879] zc3xx: probe 2wr ov vga 0x0000
[ 570.739153] gspca: usb_submit_urb [0] err -28
[ 572.238188] zc3xx: probe 2wr ov vga 0x0000
[ 574.228187] zc3xx: probe 2wr ov vga 0x0000
[ 574.395595] gspca: usb_submit_urb [0] err -28
[ 575.902484] zc3xx: probe 2wr ov vga 0x0000
[ 577.893483] zc3xx: probe 2wr ov vga 0x0000
[ 578.055884] gspca: usb_submit_urb [0] err -28
[ 579.554917] zc3xx: probe 2wr ov vga 0x0000
[ 581.544916] zc3xx: probe 2wr ov vga 0x0000
[ 581.708065] gspca: usb_submit_urb [0] err -28
[ 583.207351] zc3xx: probe 2wr ov vga 0x0000
[ 585.201953] zc3xx: probe 2wr ov vga 0x0000
[ 585.372492] gspca: usb_submit_urb [0] err -28
[ 586.871522] zc3xx: probe 2wr ov vga 0x0000
[ 588.861524] zc3xx: probe 2wr ov vga 0x0000
[ 589.025049] gspca: usb_submit_urb [0] err -28
[ 590.523826] zc3xx: probe 2wr ov vga 0x0000
[ 592.513833] zc3xx: probe 2wr ov vga 0x0000
[ 592.677357] gspca: usb_submit_urb [0] err -28
[ 594.176266] zc3xx: probe 2wr ov vga 0x0000
[ 596.170261] zc3xx: probe 2wr ov vga 0x0000
[ 596.335037] gspca: usb_submit_urb [0] err -28
[ 597.832696] zc3xx: probe 2wr ov vga 0x0000
[ 599.822693] zc3xx: probe 2wr ov vga 0x0000
[ 599.985845] gspca: usb_submit_urb [0] err -28
[ 601.484878] zc3xx: probe 2wr ov vga 0x0000
[ 603.474879] zc3xx: probe 2wr ov vga 0x0000
[ 603.638149] gspca: usb_submit_urb [0] err -28
[ 605.137186] zc3xx: probe 2wr ov vga 0x0000
[ 607.127187] zc3xx: probe 2wr ov vga 0x0000
[ 607.291336] gspca: usb_submit_urb [0] err -28
[ 608.789497] zc3xx: probe 2wr ov vga 0x0000
[ 610.783616] zc3xx: probe 2wr ov vga 0x0000
[ 610.947142] gspca: usb_submit_urb [0] err -28
[ 612.449921] zc3xx: probe 2wr ov vga 0x0000
[ 614.440047] zc3xx: probe 2wr ov vga 0x0000
[ 614.603447] gspca: usb_submit_urb [0] err -28
[ 616.110346] zc3xx: probe 2wr ov vga 0x0000
[ 618.100220] zc3xx: probe 2wr ov vga 0x0000
[ 618.263495] gspca: usb_submit_urb [0] err -28
[ 619.762529] zc3xx: probe 2wr ov vga 0x0000
[ 621.756528] zc3xx: probe 2wr ov vga 0x0000
[ 621.919802] gspca: usb_submit_urb [0] err -28
[ 623.418835] zc3xx: probe 2wr ov vga 0x0000
[ 625.408957] zc3xx: probe 2wr ov vga 0x0000
[ 625.572232] gspca: usb_submit_urb [0] err -28
[ 627.071266] zc3xx: probe 2wr ov vga 0x0000
[ 629.061266] zc3xx: probe 2wr ov vga 0x0000
[ 629.224675] gspca: usb_submit_urb [0] err -28
[ 630.731694] zc3xx: probe 2wr ov vga 0x0000
[ 632.721694] zc3xx: probe 2wr ov vga 0x0000
[ 632.884844] gspca: usb_submit_urb [0] err -28
[ 634.383879] zc3xx: probe 2wr ov vga 0x0000
[ 636.373878] zc3xx: probe 2wr ov vga 0x0000
[ 636.537152] gspca: usb_submit_urb [0] err -28
[ 638.036310] zc3xx: probe 2wr ov vga 0x0000
[ 640.026436] zc3xx: probe 2wr ov vga 0x0000
[ 640.189586] gspca: usb_submit_urb [0] err -28
[ 641.692616] zc3xx: probe 2wr ov vga 0x0000
[ 643.682617] zc3xx: probe 2wr ov vga 0x0000
[ 643.846141] gspca: usb_submit_urb [0] err -28
[ 645.344922] zc3xx: probe 2wr ov vga 0x0000
[ 647.347036] zc3xx: probe 2wr ov vga 0x0000
[ 647.510438] gspca: usb_submit_urb [0] err -28
[ 649.009345] zc3xx: probe 2wr ov vga 0x0000
[ 650.999219] zc3xx: probe 2wr ov vga 0x0000
[ 651.162496] gspca: usb_submit_urb [0] err -28
[ 652.669647] zc3xx: probe 2wr ov vga 0x0000
[ 654.659648] zc3xx: probe 2wr ov vga 0x0000
[ 654.823058] gspca: usb_submit_urb [0] err -28
[ 656.325949] zc3xx: probe 2wr ov vga 0x0000
[ 658.315950] zc3xx: probe 2wr ov vga 0x0000
[ 658.479359] gspca: usb_submit_urb [0] err -28
[ 659.978261] zc3xx: probe 2wr ov vga 0x0000
[ 661.968387] zc3xx: probe 2wr ov vga 0x0000
[ 662.131781] gspca: usb_submit_urb [0] err -28
[ 663.634687] zc3xx: probe 2wr ov vga 0x0000
[ 665.624814] zc3xx: probe 2wr ov vga 0x0000
[ 665.787839] gspca: usb_submit_urb [0] err -28
[ 667.291121] zc3xx: probe 2wr ov vga 0x0000
[ 669.284992] zc3xx: probe 2wr ov vga 0x0000
[ 669.448267] gspca: usb_submit_urb [0] err -28
[ 670.947299] zc3xx: probe 2wr ov vga 0x0000
[ 672.937300] zc3xx: probe 2wr ov vga 0x0000
[ 673.100572] gspca: usb_submit_urb [0] err -28
[ 674.599608] zc3xx: probe 2wr ov vga 0x0000
[ 676.589607] zc3xx: probe 2wr ov vga 0x0000
[ 676.753008] gspca: usb_submit_urb [0] err -28
[ 678.253039] zc3xx: probe 2wr ov vga 0x0000
[ 680.242040] zc3xx: probe 2wr ov vga 0x0000
[ 680.405442] gspca: usb_submit_urb [0] err -28
[ 681.904474] zc3xx: probe 2wr ov vga 0x0000
[ 683.894475] zc3xx: probe 2wr ov vga 0x0000
[ 684.057625] gspca: usb_submit_urb [0] err -28
[ 685.560651] zc3xx: probe 2wr ov vga 0x0000
[ 3364.281063] usb 2-1: USB disconnect, address 2
[ 3364.306471] xc2028 1-0061: destroying instance
[ 3364.307050] dvb-usb: Gigabyte U8000-RH successfully deinitialized and disconnected.
[ 3373.767495] usb 2-1: new high speed USB device using ehci_hcd and address 7
[ 3373.900409] usb 2-1: configuration #1 chosen from 1 choice
[ 3373.901035] dvb-usb: found a 'Gigabyte U8000-RH' in cold state, will try to load a firmware
[ 3373.905133] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 3374.143466] dib0700: firmware started successfully.
[ 3374.646634] dvb-usb: found a 'Gigabyte U8000-RH' in warm state.
[ 3374.646730] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 3374.646962] DVB: registering new adapter (Gigabyte U8000-RH)
[ 3374.889903] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
[ 3374.890078] xc2028 1-0061: creating new instance
[ 3374.890085] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
[ 3374.890230] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb2/2-1/input/input10
[ 3374.930672] dvb-usb: schedule remote query interval to 150 msecs.
[ 3374.930686] dvb-usb: Gigabyte U8000-RH successfully initialized and connected.

[YianPan]

Συγνωμη αλλα θα τα ξαναπουμε απο Δευτερα.... πτωμα ειμαι.

Καλο σας σαβ/κο!!

[YianPan]

Παιδια...,
Επειδη δεν το ολοκληρωσαμε αυτο... και η καρτα ΤιΒι στο παραπανω.. επειδη δεν ειχα περισσοτερο χρονο να το δοκιμασω πριν αγορασω
και ο φιλος μου το πουλησε σε αλλον. Δεν πειραζει αλλη φορα.
Αυτο το ποστ ομως τι να κανω? να τα αφησω ετσι ημιτελης ή να τα διαγραψω?

[nikpapazoglou]

γεια σας παιδια.εγω εκανα τα βηματα 1-6 ολα οκ αλλα κατι γινετε με το 7.μου λεει:nikos@nikos-laptop:~/v4l-dvb$ wget http://habbit.net/uploads/xc3028-v27.fw
--2009-12-09 23:17:48-- http://habbit.net/uploads/xc3028-v27.fw
Εύρεση του habbit.net... 208.71.170.208
Connecting to habbit.net|208.71.170.208|:80... συνδέθηκε.
Η αίτηση για HTTP στάλθηκε, αναμονή απάντησης... 200 OK
Μήκος: 66220 (65K) [text/plain]
Saving to: `xc3028-v27.fw'

100%[======================================>] 66220 62,0K/s in 1,0s

2009-12-09 23:17:50 (62,0 KB/s) - `xc3028-v27.fw' saved [66220/66220]

nikos@nikos-laptop:~/v4l-dvb$ sudo mv dvb-usb-dib0700-1.20.fw xc3028-v27.fw /lib/firmware/
mv: αδύνατη η εκτέλεση της stat στο αρχείο «dvb-usb-dib0700-1.20.fw»: No such file or directory

τι πρεπει να κανω τωρα? (τα παραπανω ειναι τα βηματα 6 και 7)

[logari81]

Καποιο σφαλμα θα εκανες στην πληκτρολόγηση της εντολης 5. Παντως τις εντολές 5,6,7 μπορεις να τις αντικαταστησεις με τις παρακάτω 2:

Κώδικας: Επιλογή όλων

sudo wget http://www.wi-bw.tfh-wildau.de/~pboettch/home/files/dvb-usb-dib0700-1.20.fw -O /lib/firmware/dvb-usb-dib0700-1.20.fw
sudo wget http://habbit.net/uploads/xc3028-v27.fw -O /lib/firmware/xc3028-v27.fw

[nikpapazoglou]

εκανα την αντικατασταση οπως μου ειπες και ολα Ο.Κ. το Me TV ειδε την καρτα μια φορα αλλα εγω δεν ειδα TV. προσπαθησα με ολα τα προγρ. αλλα τπτα.
θα προσπαθησω λιγο ακομη μονος μου και μετα τα ξαναλεμε. ευχαριστω πολυ.

[xqtr]

Aν δεν κανω λαθος... οπως λεει και στη σελιδα με τον driver... μεχρι στιγμης με το συγκεκριμενο tv tuner... μπορεις να δεις μονο ψηφιακη τηλεοραση... κατι που μαλλον ειναι λιγο δυσκολο προς το παρον για την Ελλαδα...