Πρόβλημα στη σύνδεση κινητού nokia - ubuntu μέσω bluetooth

[kriti]

πως θα συνδεσω το 6131 nokia κινητο μου με το wammu στο ubuntu με bluetooth?
ενω το εχω συνδεσει με bluetooth στο ubuntu απο το wammu δεν το εχω βρει
και το θελω για buck up των επαφων
υπαρχει οδηγος καπου?
ζειταει port /address/ και δεν ξερω τι να βαλω εχω δοκιμασει πολλες ωρες αλλα ματαια

[ilpara]

Φαίνεται ότι σε κάποιους δούλεψε. Αν θες ρίξε μια ματιά στα παρακάτω links. Αν βρεις λύση γράψε ποια ήταν. Θα το δοκιμάσω και εγώ (nokia 6233) και θα σου πω (αλλά όχι τώρα γιατί δεν προλαβαίνω). Σημειώνω ότι για να κάνει σύνδεση bluetooth το κιν με τον Η/Υ θέλει να βάλεις και στα δύο το ίδιο passkey (δες εδώ http://forum.ubuntu-gr.org/viewtopic.php?f=16&t=162&p=917&hilit=passkey#p917)!

http://cihar.com/gammu/phonedb/nokia/1081/

http://cihar.com/gammu/phonedb/nokia/1934/

και
http://www.gammu.org/wiki/index.php?title=MyGnokii:Main_Page

[rat]

Καλησπέρα,
Μήπως βρήκες τι γράφεις εκεί που λέει phone port ?
Από ότι είδα σε ένα screenshot
http://wammu.eu/screenshots/wizard-6.png
είναι αυτής της μορφής.
Πως όμως βρίσκομαι ποια /dev/... είναι.
Εγώ προσπαθώ να συνδέσω ένα sony - ericson k800i μέσω bluetooth.
Αν βρώ λύση θα σας ενημερώσω.

Η σύνδεση μέσω bluetooth επιτυγχάνεται, έχω μεταφέρει αρχεία από το κινητό στον υπολογιστή και το αντίθετο.
Το wammu δεν μπορώ να ρυθμίσω.

Με την εντολή
hcitool scan
εμφανίζει το όνομα του κινητού και την mac adreess φαντάζομαι του bluetooth.

[kriti]

βρηκε καποιος λυση σε αυτο ?συνδεση nokia wammu bluetooth

[kriti]

σημερα αλλαξα τηλεφωνο και πηρα ενα samsung j700 και εχει και καλωδιο συνδεσης μετο pc. αν σας πω οτι ουτε αυτο καταφερα να το συνδεσω με το wammu? βγαζει ενα error 30
καμια ιδεα?
αν εγκαταστησω το προγραμμα που εχει το τηλεφωνο σε cd στα xp στο vbox θα κανω δουλεια αραγε ?
αλλιως εγκαταλειπω την ιδεα συνδεσης με το ubuntu

[linuxman]

σημερα αλλαξα τηλεφωνο και πηρα ενα samsung j700 και εχει και καλωδιο συνδεσης μετο pc. αν σας πω οτι ουτε αυτο καταφερα να το συνδεσω με το wammu? βγαζει ενα error 30
καμια ιδεα?
αν εγκαταστησω το προγραμμα που εχει το τηλεφωνο σε cd στα xp στο vbox θα κανω δουλεια αραγε ?
αλλιως εγκαταλειπω την ιδεα συνδεσης με το ubuntu

Όταν το έχεις συνδέσεις για δώσε σε τερματικό

Κώδικας: Επιλογή όλων


1. lsusb
2. dmesg


και πόσταρε τα εδώ μέσα στα

Κώδικας: Επιλογή όλων

εδώ

[kriti]

Κώδικας: Επιλογή όλων

[ 11.846359] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 11.993443] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 12.013461] Brought up 2 CPUs
[ 12.013488] CPU0 attaching sched-domain:
[ 12.013490] domain 0: span 03
[ 12.013492] groups: 01 02
[ 12.013496] CPU1 attaching sched-domain:
[ 12.013497] domain 0: span 03
[ 12.013499] groups: 02 01
[ 12.013754] net_namespace: 64 bytes
[ 12.013765] Booting paravirtualized kernel on bare hardware
[ 12.014235] Time: 5:33:23 Date: 09/26/08
[ 12.014265] NET: Registered protocol family 16
[ 12.014485] EISA bus registered
[ 12.014490] ACPI: bus type pci registered
[ 12.014712] PCI: PCI BIOS revision 2.10 entry at 0xfd883, last bus=7
[ 12.014715] PCI: Using configuration type 1
[ 12.014729] Setting up standard PCI resources
[ 12.017253] ACPI: EC: Look up EC in DSDT
[ 12.019149] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 12.019584] ACPI: Interpreter enabled
[ 12.019588] ACPI: (supports S0 S3 S4 S5)
[ 12.019602] ACPI: Using IOAPIC for interrupt routing
[ 12.020176] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 12.024647] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 12.024650] ACPI: EC: driver started in interrupt mode
[ 12.024698] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 12.025515] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 12.025520] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 12.027102] PCI: Transparent bridge - 0000:00:1e.0
[ 12.027150] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 12.027456] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 12.027588] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 12.027712] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 12.027832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 12.027966] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 12.034297] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 12.034416] ACPI: PCI Interrupt Link [LNKB] (IRQs *3)
[ 12.034533] ACPI: PCI Interrupt Link [LNKC] (IRQs *3)
[ 12.034649] ACPI: PCI Interrupt Link [LNKD] (IRQs *4)
[ 12.034764] ACPI: PCI Interrupt Link [LNKE] (IRQs *10)
[ 12.034880] ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
[ 12.034997] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 12.035113] ACPI: PCI Interrupt Link [LNKH] (IRQs *7)
[ 12.035251] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 12.035285] pnp: PnP ACPI init
[ 12.035292] ACPI: bus type pnp registered
[ 12.037293] pnp: PnP ACPI: found 10 devices
[ 12.037296] ACPI: ACPI bus type pnp unregistered
[ 12.037299] PnPBIOS: Disabled by ACPI PNP
[ 12.037565] PCI: Using ACPI for IRQ routing
[ 12.037568] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 12.085482] NET: Registered protocol family 8
[ 12.085485] NET: Registered protocol family 20
[ 12.085523] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 12.085528] hpet0: 3 64-bit timers, 14318180 Hz
[ 12.086567] AppArmor: AppArmor Filesystem Enabled
[ 12.089308] Time: tsc clocksource has been installed.
[ 12.089323] Switched to high resolution mode on CPU 0
[ 12.089443] Switched to high resolution mode on CPU 1
[ 12.113305] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 12.113308] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 12.113312] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 12.113315] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 12.113318] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 12.113321] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 12.113325] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 12.113328] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 12.113335] system 00:03: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 12.113341] system 00:05: ioport range 0x380-0x383 has been reserved
[ 12.113344] system 00:05: ioport range 0x680-0x69f has been reserved
[ 12.113347] system 00:05: ioport range 0x800-0x80f has been reserved
[ 12.113350] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 12.113353] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 12.113356] system 00:05: ioport range 0x1640-0x164f has been reserved
[ 12.113362] system 00:06: ioport range 0x6a0-0x6af has been reserved
[ 12.113364] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 12.143839] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 12.143842] PCI: Bridge: 0000:00:01.0
[ 12.143844] IO window: disabled.
[ 12.143848] MEM window: dc000000-ddffffff
[ 12.143851] PREFETCH window: c0000000-cfffffff
[ 12.143855] PCI: Bridge: 0000:00:1c.0
[ 12.143858] IO window: 2000-2fff
[ 12.143864] MEM window: d8000000-d9ffffff
[ 12.143869] PREFETCH window: d2000000-d3ffffff
[ 12.143875] PCI: Bridge: 0000:00:1c.1
[ 12.143878] IO window: 3000-3fff
[ 12.143884] MEM window: d6000000-d7ffffff
[ 12.143889] PREFETCH window: d0000000-d1ffffff
[ 12.143895] PCI: Bridge: 0000:00:1c.2
[ 12.143898] IO window: 4000-4fff
[ 12.143904] MEM window: da000000-dbffffff
[ 12.143909] PREFETCH window: d4000000-d5ffffff
[ 12.143915] PCI: Bridge: 0000:00:1e.0
[ 12.143917] IO window: disabled.
[ 12.143923] MEM window: de000000-de0fffff
[ 12.143927] PREFETCH window: disabled.
[ 12.143946] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 12.143951] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 12.143975] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 12.143982] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.144005] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 12.144011] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 12.144036] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 12.144042] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 12.144054] PCI: Enabling device 0000:00:1e.0 (0004 -> 0006)
[ 12.144060] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 12.144072] NET: Registered protocol family 2
[ 12.190316] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 12.190547] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 12.191254] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 12.191607] TCP: Hash tables configured (established 131072 bind 65536)
[ 12.191609] TCP reno registered
[ 12.202404] checking if image is initramfs... it is
[ 12.967182] Freeing initrd memory: 8505k freed
[ 12.967348] Simple Boot Flag at 0x35 set to 0x1
[ 12.968080] audit: initializing netlink socket (disabled)
[ 12.968093] audit(1222407203.577:1): initialized
[ 12.968332] highmem bounce pool size: 64 pages
[ 12.970432] VFS: Disk quotas dquot_6.5.1
[ 12.970508] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 12.970657] io scheduler noop registered
[ 12.970659] io scheduler anticipatory registered
[ 12.970661] io scheduler deadline registered
[ 12.970673] io scheduler cfq registered (default)
[ 12.970785] Boot video device is 0000:01:00.0
[ 12.970903] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 12.970940] assign_interrupt_mode Found MSI capability
[ 12.970972] Allocate Port Service[0000:00:01.0:pcie00]
[ 12.971060] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 12.971119] assign_interrupt_mode Found MSI capability
[ 12.971166] Allocate Port Service[0000:00:1c.0:pcie00]
[ 12.971200] Allocate Port Service[0000:00:1c.0:pcie02]
[ 12.971307] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 12.971365] assign_interrupt_mode Found MSI capability
[ 12.971412] Allocate Port Service[0000:00:1c.1:pcie00]
[ 12.971448] Allocate Port Service[0000:00:1c.1:pcie02]
[ 12.971552] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 12.971611] assign_interrupt_mode Found MSI capability
[ 12.971657] Allocate Port Service[0000:00:1c.2:pcie00]
[ 12.971693] Allocate Port Service[0000:00:1c.2:pcie02]
[ 12.971974] isapnp: Scanning for PnP cards...
[ 13.326254] isapnp: No Plug & Play device found
[ 13.355064] Real Time Clock Driver v1.12ac
[ 13.355296] hpet_resources: 0xfed00000 is busy
[ 13.355326] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 13.356575] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 13.356647] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 13.356750] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 13.373887] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 13.373892] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 13.393174] mice: PS/2 mouse device common for all mice
[ 13.393295] EISA: Probing bus 0 at eisa.0
[ 13.393303] Cannot allocate resource for EISA slot 1
[ 13.393305] Cannot allocate resource for EISA slot 2
[ 13.393308] Cannot allocate resource for EISA slot 3
[ 13.393310] Cannot allocate resource for EISA slot 4
[ 13.393329] EISA: Detected 0 cards.
[ 13.393332] cpuidle: using governor ladder
[ 13.393334] cpuidle: using governor menu
[ 13.393422] NET: Registered protocol family 1
[ 13.393449] Using IPI No-Shortcut mode
[ 13.393480] registered taskstats version 1
[ 13.393594] Magic number: 8:529:568
[ 13.393633] hash matches device ptyb0
[ 13.393686] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 13.393688] EDD information not available.
[ 13.393892] Freeing unused kernel memory: 368k freed
[ 13.404635] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 13.492839] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 2400k, total 131072k
[ 13.492843] vesafb: mode is 640x480x32, linelength=2560, pages=1
[ 13.492846] vesafb: protected mode interface info at c000:d5d0
[ 13.492848] vesafb: pmi: set display start = c00cd606, set palette = c00cd670
[ 13.492850] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 13.492861] vesafb: scrolling: redraw
[ 13.492864] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 13.492971] Console: switching to colour frame buffer device 80x30
[ 13.516230] fb0: VESA VGA frame buffer device
[ 14.664129] fuse init (API version 7.9)
[ 14.682912] ACPI: SSDT 7FE7E646, 01E5 (r1 HP 30BC 3000 INTL 20050624)
[ 14.683128] ACPI: SSDT 7FE7E3E5, 01DC (r1 HP 30BC 3001 INTL 20050624)
[ 14.683554] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 14.683560] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 14.683817] ACPI: SSDT 7FE7E82B, 0094 (r1 HP 30BC 3000 INTL 20050624)
[ 14.684019] ACPI: SSDT 7FE7E5C1, 0085 (r1 HP 30BC 3000 INTL 20050624)
[ 14.684522] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 14.684528] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 14.688414] ACPI: Thermal Zone [THR1] (8 C)
[ 15.045601] usbcore: registered new interface driver usbfs
[ 15.045627] usbcore: registered new interface driver hub
[ 15.046118] usbcore: registered new device driver usb
[ 15.056894] USB Universal Host Controller Interface driver v3.0
[ 15.056964] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
[ 15.056976] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 15.056981] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 15.057236] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 15.057271] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001800
[ 15.057420] usb usb1: configuration #1 chosen from 1 choice
[ 15.057445] hub 1-0:1.0: USB hub found
[ 15.057451] hub 1-0:1.0: 2 ports detected
[ 15.070982] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
[ 15.070986] Copyright (c) 1999-2006 Intel Corporation.
[ 15.093749] SCSI subsystem initialized
[ 15.113925] libata version 3.00 loaded.
[ 15.160951] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
[ 15.160965] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 15.160970] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 15.160997] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 15.161031] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001820
[ 15.161148] usb usb2: configuration #1 chosen from 1 choice
[ 15.161171] hub 2-0:1.0: USB hub found
[ 15.161177] hub 2-0:1.0: 2 ports detected
[ 15.264949] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 15.264963] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 15.264967] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 15.264996] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 15.265031] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 15.265149] usb usb3: configuration #1 chosen from 1 choice
[ 15.265174] hub 3-0:1.0: USB hub found
[ 15.265179] hub 3-0:1.0: 2 ports detected
[ 15.369925] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 15.369936] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 15.369941] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 15.369965] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 15.369999] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 15.370114] usb usb4: configuration #1 chosen from 1 choice
[ 15.370139] hub 4-0:1.0: USB hub found
[ 15.370143] hub 4-0:1.0: 2 ports detected
[ 15.473950] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 15.473967] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 15.505812] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 15.531530] e1000: 0000:05:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:16:36:93:e5:5e
[ 15.589447] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 15.589509] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
[ 15.589525] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 15.589530] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 15.589561] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 15.593485] ehci_hcd 0000:00:1d.7: debug port 1
[ 15.593492] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 15.593500] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xde304000
[ 15.632813] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 15.633034] usb usb5: configuration #1 chosen from 1 choice
[ 15.633060] hub 5-0:1.0: USB hub found
[ 15.633066] hub 5-0:1.0: 8 ports detected
[ 15.736983] ata_piix 0000:00:1f.1: version 2.12
[ 15.737014] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 15.737081] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 15.737263] scsi0 : ata_piix
[ 15.737323] scsi1 : ata_piix
[ 15.737800] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1880 irq 14
[ 15.737803] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1888 irq 15
[ 15.888747] Clocksource tsc unstable (delta = -1122785645 ns)
[ 15.892743] Time: hpet clocksource has been installed.
[ 15.918329] usb 2-1: device not accepting address 2, error -71
[ 15.924655] ata1.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.05, max MWDMA2
[ 15.958845] ata1.00: configured for MWDMA2
[ 15.958925] ata2: port disabled. ignoring.
[ 15.960370] scsi 0:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.05 PQ: 0 ANSI: 5
[ 15.960671] ACPI: PCI Interrupt 0000:07:05.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 15.960680] PCI: Setting latency timer of device 0000:07:05.0 to 64
[ 16.013388] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 16.018187] ahci 0000:00:1f.2: version 3.0
[ 16.018216] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
[ 16.018266] ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports
[ 16.018269] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf
[ 16.058756] usb 5-2: new high speed USB device using ehci_hcd and address 2
[ 16.191606] usb 5-2: configuration #1 chosen from 1 choice
[ 16.432106] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
[ 16.432116] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 16.432126] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 16.432488] scsi2 : ahci
[ 16.432704] scsi3 : ahci
[ 16.432865] scsi4 : ahci
[ 16.433024] scsi5 : ahci
[ 16.433110] ata3: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304500 irq 219
[ 16.433114] ata4: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304580 irq 219
[ 16.433118] ata5: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304600 irq 219
[ 16.433121] ata6: SATA max UDMA/133 abar m1024@0xde304400 port 0xde304680 irq 219
[ 16.455731] usb 2-1: new low speed USB device using uhci_hcd and address 4
[ 16.483379] ieee1394: Host added: ID:BUS[0-00:1023] GUID[009fc0003473bd00]
[ 16.495443] usb 2-1: configuration #1 chosen from 1 choice
[ 16.540560] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 16.540995] ata3.00: ATA-7: FUJITSU MHV2120BH PL, 892C, max UDMA/100
[ 16.540998] ata3.00: 234441648 sectors, multi 16: LBA48
[ 16.543394] ata3.00: configured for UDMA/100
[ 16.555925] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 16.587839] usb 3-2: configuration #1 chosen from 1 choice
[ 16.589726] usbcore: registered new interface driver hiddev
[ 16.604484] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.1/usb2/2-1/2-1:1.0/input/input2
[ 16.624185] input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-1
[ 16.624223] usbcore: registered new interface driver usbhid
[ 16.624231] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 16.640716] ata4: SATA link down (SStatus 0 SControl 0)
[ 16.695636] ata5: SATA link down (SStatus 0 SControl 300)
[ 16.734277] ata6: SATA link down (SStatus 0 SControl 0)
[ 16.734552] scsi 2:0:0:0: Direct-Access ATA FUJITSU MHV2120B 892C PQ: 0 ANSI: 5
[ 16.743888] Driver 'sd' needs updating - please use bus_type methods
[ 16.751241] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 16.751256] sd 2:0:0:0: [sda] Write Protect is off
[ 16.751258] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.751276] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.751328] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 16.751338] sd 2:0:0:0: [sda] Write Protect is off
[ 16.751341] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 16.751358] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 16.751361] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 16.757933] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 16.757937] Uniform CD-ROM driver Revision: 3.20
[ 16.757983] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 16.832473] sda1 sda2 < sda5 >
[ 16.859402] sd 2:0:0:0: [sda] Attached SCSI disk
[ 16.864904] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 16.864927] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 17.096836] Attempting manual resume
[ 17.096839] swsusp: Resume From Partition 8:5
[ 17.096841] PM: Checking swsusp image.
[ 17.097019] PM: Resume from disk failed.
[ 17.144600] kjournald starting. Commit interval 5 seconds
[ 17.144626] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.281598] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 27.317611] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.385557] iTCO_vendor_support: vendor-support=0
[ 27.421546] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 27.421649] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 27.421689] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 27.501662] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 27.557583] Linux agpgart interface v0.102
[ 27.614646] input: Power Button (FF) as /devices/virtual/input/input4
[ 27.646486] ACPI: Power Button (FF) [PWRF]
[ 27.646542] input: Power Button (CM) as /devices/virtual/input/input5
[ 27.702487] ACPI: Power Button (CM) [PWRB]
[ 27.702556] input: Sleep Button (CM) as /devices/virtual/input/input6
[ 27.734524] intel_rng: FWH not detected
[ 27.758488] ACPI: Sleep Button (CM) [SLPB]
[ 27.758553] input: Lid Switch as /devices/virtual/input/input7
[ 27.790740] ACPI: Lid Switch [LID]
[ 27.791092] ACPI: AC Adapter [ACAD] (on-line)
[ 27.901589] ACPI: Battery Slot [BAT0] (battery present)
[ 27.951204] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input8
[ 28.006444] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 28.006514] ACPI: WMI-Acer: Mapper loaded
[ 28.007129] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 28.054439] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 28.603020] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 28.603025] ricoh-mmc: Copyright(c) Philip Langdale
[ 28.603067] ricoh-mmc: Ricoh MMC controller found at 0000:07:05.2 [1180:0843] (rev 1)
[ 28.603080] ricoh-mmc: Controller is now disabled.
[ 28.821689] sdhci: Secure Digital Host Controller Interface driver
[ 28.821694] sdhci: Copyright(c) Pierre Ossman
[ 28.821739] sdhci: SDHCI controller found at 0000:07:05.1 [1180:0822] (rev 19)
[ 28.821759] PCI: Enabling device 0000:07:05.1 (0000 -> 0002)
[ 28.821766] ACPI: PCI Interrupt 0000:07:05.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 28.821786] sdhci:slot0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 28.821794] PCI: Setting latency timer of device 0000:07:05.1 to 64
[ 28.821843] mmc0: SDHCI at 0xde000800 irq 17 DMA
[ 28.986304] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 28.986309] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 28.986463] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 28.986478] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 28.986504] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 29.102244] Bluetooth: Core ver 2.11
[ 29.112595] NET: Registered protocol family 31
[ 29.112598] Bluetooth: HCI device and connection manager initialized
[ 29.112602] Bluetooth: HCI socket layer initialized
[ 29.347739] nvidia: module license 'NVIDIA' taints kernel.
[ 29.641708] Bluetooth: HCI USB driver ver 2.9
[ 29.644064] usbcore: registered new interface driver hci_usb
[ 29.649597] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5B11
[ 29.649614] usbcore: registered new interface driver usblp
[ 29.717497] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04713/0x200000
[ 29.779219] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input10
[ 30.076073] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 30.076096] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 30.076223] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.12 Thu Jul 17 18:11:36 PDT 2008
[ 30.077467] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 21
[ 30.077502] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 30.160888] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 30.170334] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 30.368976] lp: driver loaded but no devices found
[ 30.488917] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k
[ 206.664033] EXT3 FS on sda1, internal journal
[ 207.219191] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 207.728266] No dock devices found.
[ 208.940143] apm: BIOS not found.
[ 209.480805] ppdev: user-space parallel port driver
[ 209.666332] audit(1222407404.586:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5397 profile="/usr/sbin/cupsd" namespace="default"
[ 212.062310] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 212.062320] vboxdrv: Successfully done.
[ 212.062324] vboxdrv: Found 2 processor cores.
[ 212.062358] vboxdrv: fAsync=0 u64DiffCores=3354.
[ 212.062428] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 212.062433] vboxdrv: Successfully loaded version 1.6.4 (interface 0x00080000).
[ 213.928424] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 213.928437] e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
[ 214.097450] Bluetooth: L2CAP ver 2.9
[ 214.097461] Bluetooth: L2CAP socket layer initialized
[ 214.255903] Bluetooth: RFCOMM socket layer initialized
[ 214.255925] Bluetooth: RFCOMM TTY layer initialized
[ 214.255929] Bluetooth: RFCOMM ver 1.8
[ 218.411864] NET: Registered protocol family 17
[ 222.461210] NET: Registered protocol family 10
[ 222.462271] lo: Disabled Privacy Extensions
[ 222.465978] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 232.543288] eth0: no IPv6 routers present
[ 244.884761] CPU0 attaching NULL sched-domain.
[ 244.884768] CPU1 attaching NULL sched-domain.
[ 244.899351] CPU0 attaching sched-domain:
[ 244.899355] domain 0: span 03
[ 244.899357] groups: 01 02
[ 244.899361] CPU1 attaching sched-domain:
[ 244.899363] domain 0: span 03
[ 244.899364] groups: 02 01
[ 329.283109] usb 1-1: new full speed USB device using uhci_hcd and address 2
[ 329.338041] usb 1-1: configuration #3 chosen from 1 choice
[ 329.568147] cdc_acm 1-1:3.1: ttyACM0: USB ACM device
[ 329.570879] usbcore: registered new interface driver cdc_acm
[ 329.570988] /build/buildd/linux-2.6.24/drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
manos@manos-laptop:~$



[linuxman]

Έχουμε καλά αποτελέσματα

Κώδικας: Επιλογή όλων

[ 329.568147] cdc_acm 1-1:3.1: ttyACM0: USB ACM device
[ 329.570879] usbcore: registered new interface driver cdc_acm
[ 329.570988] /build/buildd/linux-2.6.24/drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters

Για δώσε τώρα και

Κώδικας: Επιλογή όλων

lsusb

[kriti]

Κώδικας: Επιλογή όλων

manos@manos-laptop:~$ lsusb
Bus 005 Device 007: ID 03f0:5b11 Hewlett-Packard
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
manos@manos-laptop:~$


ωχ ξεχασα να το συνδεσω

[kriti]

Κώδικας: Επιλογή όλων

manos@manos-laptop:~$ lsusb
Bus 005 Device 007: ID 03f0:5b11 Hewlett-Packard
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 005: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 005: ID 04e8:663e Samsung Electronics Co., Ltd
Bus 001 Device 001: ID 0000:0000
manos@manos-laptop:~$



τωρα ειναι συνδεμενο αλλα πως το βλεπω απο το wammu δεν ξερω και πως κραταω backup τις επαφες μου?